3, "All drives make some noise, however, if your computer hard drive is making unusual noises (i.e. metallic, grinding), continuing to run the system may lead to extensive data loss. Shut down now and view the README.TXT file found on the SeaTools Desktop disc on another computer. The README.TXT file includes information on requesting an RMA, return shipping procedures and Data Recovery."
4, "&Next"
5, "SeaTools Diagnostic"
6, "\r\nSelect this option to test your hard drives for errors. This is a Seagate specific diagnostic test. If you have a non-Seagate drive to test, run the Generic Diagnostic tests."
7, "View SeaTools Diagnostic Report"
8, "\r\nSelect this option to view the SeaTools Diagnostic test results log files. This option will also allow you to save or print this file."
9, "Generic Diagnostic"
10, "\r\nSelect this option for a generic test of your hard disc drives.\r\n\r\nThere are five tests available including a system memory test, a 90 second evaluation, a file system test, and a complete surface scan.\r\n\r\nThese tests are designed to determine if a drive is functioning correctly."
11, "View Generic Diagnostic Report"
12, "\r\nSelect this option to view the Generic Diagnostic results. This option will also allow you to save or print this report file."
13, "View License Agreement"
14, "\r\nSelect this option to view the License Agreement."
15, "View Read Me"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
16, "\r\nSelect this option to view the Read Me file."
17, "&SeaTools Diagnostic"
18, "Sea&Tools Report"
19, "&Generic Diagnostic"
20, "G&eneric Report"
21, "&License"
22, "&Read Me"
23, "System Information"
24, "Diagnostic Type"
25, "&Quick Diagnostic:"
26, "&Full Diagnostic:"
27, "This test is designed to quickly determine if a drive is functioning correctly. If you are having problems and this diagnostic passes, run the Full Diagnostic."
28, "Performs all of the quick tests as well as a more exhaustive analysis of each selected hard drive."
29, "Test Status"
30, "Device Diagnostic"
31, "commands each drive to perform an internal diagnostic test implemented by the hard drive."
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
32, "SMART Status Check"
33, "reads the Self-Monitoring, Analysis and Reporting Technology status of your drives."
34, "Quick Functional Test"
35, "verifies that the electrical and mechanical parts of your hard disc drives are working correctly. The test does calculated seeks and reads of your hard disc drive."
36, "Random Read Test"
37, "verifies the physical integrity of the media where your data is stored. The test reads random areas of each hard disc drive in your system."
38, "Complete Surface Scan"
39, "verifies the physical integrity of the media where your data is stored. The scan performs a complete, sector-by-sector read of each hard disc drive in your system."
40, "File Structure Test"
41, "examines the partition, volume, directory, and file information. The test determines if there are data file structure errors in any partitions or volumes."
42, "SeaTools Quick Diagnostic"
43, "Running the SeaTools Hard Drive Diagnostic quick test:\r\n\r\nBefore you send a drive in, it would be beneficial to know if a replacement drive will be the solution to your problem. To do that, the quick test is a fast way to determine the physical status of your drive. This test checks the SMART (Self Monitoring And Report Technology) status of your drive which offers early warning of drive failure. The quick test also verifies that the electrical and mechanical parts of your hard disc drive are working correctly."
44, "SeaTools Full Diagnostic"
45, "Running the SeaTools Hard Drive Diagnostic Full test:\r\n\r\nThis test is a thorough way to determine the physical integrity of your drive. A quick test will be done first. The remainder of the testing will concentrate on sequential reads followed by verification of the data read.\r\n\r\nThe time between progress bar movements may be greater than 10 minutes. This is a long test."
46, "Testing drive..."
47, "Diagnostic Summary"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
48, "Test summary goes here"
49, "&View Detailed Report"
50, "Please wait while loading document."
51, "readme.txt"
52, "license.txt"
53, "seagate.log"
54, "da.log"
55, "Read Me <%s>"
56, "License Agreement <%s>"
57, "SeaTools Diagnostic Report <%s>"
58, "Generic Diagnostic Report <%s>"
59, "&Cancel"
60, "&OK"
61, "&Retry"
62, "&Yes"
63, "&No"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
64, "&Abort"
65, "&Help"
66, "&Back"
67, "&Next"
68, "&Cancel"
69, "&Stop"
70, "&Done"
71, "E&xit"
72, "&Help"
73, "E&xit"
74, "There was an error opening this file. Please make sure the file exists in the specified location."
75, "Unable to locate any Seagate disc drives. Please run the Generic Diagnostics."
76, "Error"
77, "Quick Help"
78, "Drive selection quick help"
79, "Summary quick help"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
80, "Help System"
81, "Help Topic"
82, "HELP TEXT"
83, "Running Test %i: %s"
84, "Testing Drive 1:"
85, "FAT 16"
86, "FAT 12"
87, "FAT 32"
88, "NTFS"
89, "Dynamic Disk"
90, "Unknown"
91, "BIOS Drive"
92, "SeaTools Desktop"
93, "&About SeaTools"
94, "E&xit"
95, "&Help"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
96, "Help Topics"
97, "Primary Master"
98, "Primary Slave"
99, "Secondary Master"
100, "Secondary Slave"
101, "Primary Master (PCI)"
102, "Primary Slave (PCI)"
103, "Secondary Master (PCI)"
104, "Secondary Slave (PCI)"
105, "Insert diskette"
106, "Selected Drive:\t"
107, "System &Memory Test"
108, "&SMART Status Check"
109, "&90 Second Test"
110, "&File Structure"
111, "&Complete Surface Scan"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
112, "System memory error"
113, "System Memory"
114, "SMART Check"
115, "90-Second"
116, "File Structure"
117, "Surface Scan"
118, "Testing Status"
119, "Current Test"
120, "Select 'Skip' to skip current diagnostic, or 'Cancel' to cancel remaining diagnostic(s)."
121, "Device %d of %d"
122, "No Label"
123, "Writes and reads back data patterns in Random Access Memory. The test ensures your system memory is OK."
124, "System Memory Test"
125, "Reads the Self-Monitoring, Analysis, and Reporting Technology status of the selected drives. SMART equipped hard disc drives offer early warning of failures that could lead to data loss."
126, "SMART Status Check"
127, "Verifies with 90% accuracy the physical integrity of the media where the data is stored. Test is completed within 90 seconds."
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
128, "90-Second Test"
129, "Examines FATand NTFS file system partitions, volumes, directories, and files. The test determines if there are data file structure errors in any FAT / NTFS partitions or volumes."
130, "File Structure Test"
131, "Verifies the physical integrity of the media. The scan performs a complete, sector-by-sector read of the selected drives."
132, "Complete Surface Scan"
133, "Test &all drives"
134, "Test a specific drive &only"
135, "*** PROBLEM(S) ENCOUNTERED ***"
136, "NO PROBLEMS FOUND"
137, "No Problems Found\nIt appears that your ATA or SCSI disc drive is physically functioning as it should but you are advised to run the full test to fully determine the status of your drive. If you need further help, our Technical Support department will be happy to help. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
138, "No Problems Found\nIt appears that your ATA or SCSI disc drive is physically functioning as it should. If you need further help, our Technical Support department will be happy to help. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
139, "*** PROBLEMS ENCOUNTERED ***\nIt appears that your ATA or SCSI drive was unable to complete all of the selected tests OR has one or more problems. These problems may or may not be with the drive itself. Please click on the \"View Detailed Report\" Button below for more information."
140, "*** PROBLEMS ENCOUNTERED ***\nIt appears that your ATA or SCSI drive was unable to complete all of the selected tests OR has one or more problems. These problems may or may not be with the drive itself. Please click on the \"VIEW DETAILED REPORT\" Button below for more information. \n\nIf you need further help, our Technical Support department will be happy to help. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
141, "No Problems Found\nIt appears that your ATA or SCSI disc drive is physically functioning as it should. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
142, "No Problems Found\nIt appears that your ATA or SCSI disc drive is physically functioning as it should. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
143, "Drive: "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
144, "Printing in Progress..."
145, "An error occurred while printing the document. Check to make sure all printer cables are attached properly and that your printer is turned on.\n\nClick 'Retry' to try again or 'Cancel' to cancel printing."
146, "Your printer may be out of paper. Please re-load your paper tray and click 'Retry' to continue or click 'Cancel' to abort printing."
147, "Print Error"
148, "Print"
149, "Save to Floppy"
150, "Saving in Progress..."
151, "A file with the same name currently exists on the destination. Overwrite it?"
152, "An error occured trying to save the file to the disk. Please make sure that the disk is in the drive and not write protected and try again."
153, "Always OVERWRITE unused sectors."
154, "Scanning sectors..."
155, "Found bad sector: %d Resolving sector usage..."
156, "BAD Sector LBA: "
157, "Not in use"
158, "Used in the directory / folder: "
159, "Used in the file: "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
160, "This sector is used by the drive's MBR (Master Boot record). Some or all of the partitions on this drive may be inaccessible."
161, "This sector is used by a BPB on the drive, and may cause a partition to be inaccessible."
162, "This sector is used by the a BPB backup on the drive."
163, "This sector is used by a File Allocation Table (FAT) on the drive. This may cause files to appear corrupted, or entire directories / folders to appear missing."
164, "This sector is used by the Root Directory. This may cause the majority of the files and folders on this partition to appear missing."
165, "This sector is in use by the Dynamic MBR. If this drive contains your operating system, it may not be bootable. The computer may also crash / hang during startup because of this problem."
166, "This sector is in use by the Drive Overlay software's code. If this drive contains your operating system, it may not be bootable. The computer may also crash / hang during startup because of this problem."
167, "This sector is in use by the NTFS Master File Table (MFT). This may cause files to appear corrupted and/or missing. If this drive contains your operating system, this problem could lead to system crashes or the inability to startup."
168, "Unable to resolve sector usage."
169, "\nIf this is a directory, any contained files or subdirectories may be inaccessible."
170, "A bad sector has been found, but it is not in use. SeaTools can try to write to this sector in an attempt to see if the drive can automatically relocate it. \n\nAttempt to overwrite the unused sector?"
171, "\nAttempting to write to the sector... FAILED"
172, "\nAttempting to write to the sector... SUCCEEDED!"
173, "SeaTools was unable to write to the sector. If this drive is still under warranty, you can stop scanning, and the drive can be sent in for replacement. Otherwise you can continue, to have the drive attempt to relocate other bad sectors.\n\n Continue?"
174, "If this drive is still under warranty, it is likely that the drive can be sent in for replacement. Would you like to get a return (RMA) form?"
184, "At least one of the drive attached to the motherboard controller in your system is having problems. This could signify a bad connection, cable or controller. SeaTools is unable to continue testing. Check the cables and connections for the following drives:\n"
185, "Select the test(s) that you would like to run on the selected drive(s). These tests can help you determine if there is a physical problem with your drive. Note: running a \"Complete Surface Scan\" can take a considerable amount of time. For more information, click \"Help\"."
186, "Generic Diagnostic Details"
187, "System Memory Test:\nWrites and reads back data patterns in Random Access Memory. The test ensures your system memory is OK. If this test fails, no other tests will be attempted.\n\nSMART Status Check:\nReads the Self-Monitoring, Analysis, and Reporting Technology (SMART) status of the selected drives. SMART equipped hard disc drives offer early warning of failures that could lead to data loss.\n\n90-Second Test:\nVerifies with 90% accuracy the physical integrity of the media where the data is stored. Test is performed based on the geometry of the drive, and is completed within 90 seconds.\n\nFile Structure Test:\nExamines the partition, volume, directory, and file information. This test runs only on partitions with the FAT and NTFS file system. It determines if there are data file structure errors in any partitions or volumes. If this test fails, and all other tests complete successfully, it is unlikely that there is anything physically wrong with the drive.\n\n"
188, "Printing and Saving Reports"
189, "SeaTools allows you to save generated reports to a floppy disc or print it.\n\nSaving - Generated reports are not automatically saved. When you are viewing a report you have the option to save this file to a floppy disc.\n\nPrinting - Reports can be printed to a printer that is connected via the parallel port. \n"
190, "Bad LBA Scan"
191, "This scan will search through your drive attempting to locate bad sectors. It will then determine what type of data (if any) resides on those sectors. If the bad sector contains a file or directory, you may be unable to access its contents. \n\nIf the sector is not in use, you'll be prompted to allow SeaTools to attempt to overwrite this sector. Doing so may cause the drive to correct the problem. If this scan encounters a number of bad LBAs, it is recommended that you backup your data as soon as possible.\n"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
192, "Diagnostic testing in progress. For more information, click on the \"Help\" button."
193, "Diagnostic testing in progress. For more information, click on the \"Help\" button."
194, "Scanning for and attempting to fix bad sectors. For more information, click on the \"Help\" button."
195, "Keyboard Navigation"
196, "You can access all SeaTools controls using only the keyboard.\n\nUse the Tab key to switch between controls, i.e. buttons, check boxes, list boxes, tab controls.\n\nUse the arrow keys to select items in a list or to switch between tabs in a tab control.\n\nItems in a list can be selected using the spacebar/enter keys.\n\nYou can quickly select certain controls by using a hot key. This is done by pressing the Alt key followed by a letter. The letter assigned to a selection will be underlined in that item's description. Alt-N and Alt-B are assigned to the 'Next' and 'Back' buttons."
197, "Select the drive(s) and the type of test you would like to run. For more information about the tests click on the \"Help\" button. "
198, "Select the drive(s) that you would like to test. For more information about the tests click on the \"Help\" button. "
199, "Seagate Diagnostics"
200, "SeaTools allows you to perform Seagate diagnostic tests on Seagate hard disc drives. If you are not able to see your drive in the list, verify that its cables are properly attached and that the BIOS is able to see the drive.\n\nTwo types of tests are available, a Quick Diagnostic and a Full Diagnostic.\n\nThe Quick Diagnostic will take about 90 seconds for each hard disc drive. This test is designed to quickly determine if a drive is functioning correctly. If you are having problems and this diagnostic passes, run the full diagnostic test.\n\nThe Full Diagnostic performs the Quick Diagnostic as well as a more exhaustive analysis of your hard drive and can take a considerable amount of time to run."
201, "Generic Diagnostics - select a drive"
202, "SeaTools allows you to perform diagnostic tests on drives attached to your system. If you are not able to see your drive in the list, verify that its cables are properly attached and that the BIOS is able to see the drive. On the next screen you will be provided with a list of tests to run on the selected drives."
203, "Interpreting Diagnostic Results"
204, "If running the diagnostics on any of your drives resulted in an error, it is highly recommended that you read through the generated results. To do this, click on \"View Detailed Report\" on the summary screen. From the main menu, click on the \"View Seagate Diagnostic Report\" or the \"View Generic Diagnostic Report\" buttons. \n\nIf the report states that the bad sector was reallocated, you may want to periodically run SeaTools again to make sure that the drive stays in working order.\n\nIf SeaTools was unable to relocate a bad sector, or if a test failed, your drive may be returnable. For more information, consult the README.TXT file include information on requesting an RMA, return shipping procedures and Data Recovery.\n\nIf you are not experiencing data loss and Generic Diagnostic reports File System Structure errors, they may be caused by a lock-up or failure to shutdown Windows correctly. "
205, "If one of your tests failed to complete successfully, click on the \"View Detailed Report\" button for more information. "
206, "Complete Surface Scan:\nVerifies the physical integrity of the media where your data is stored. The scan performs a complete, sector-by-sector read of the selected hard disc drives in your system. This test takes a considerable amount of time, especially on large drives.\n"
207, "Performing Complete Surface Scan on drive: "
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
208, "*** TEST(S) SKIPPED ***\n\nAt least one test was skipped. To view the results of the tests that completed, click on the \"VIEW DETAILED REPORT\" button."
209, "*** TEST(S) NOT SUPPORTED ***\n\nAt least one test was not supported. To view the full results and determine which test(s) did not complete or were unsupported, please click on the \"VIEW DETAILED REPORT\" button."
210, "At least one test was SKIPPED"
211, "At least one test was UNSUPPORTED"
212, "Scan Completed... NO PROBLEMS FOUND"
213, "Scan Completed... PROBLEMS FOUND"
214, "Many times, these errors may be repaired through normal system maintenance. If you are experiencing a hardware error, you should isolate the cause and replace the failing component. After completing any maintenance tasks, run SeaTools again to verify that all errors have been repaired. If errors continue to occur, the system may not be stable. "
215, "Unable to locate any hard disc drives in your system. Please verify all cable attachments and BIOS settings."
216, "RMA Form"
217, "If your Seagate hard disc drive is under warranty:\n\nIf the drive is functioning well enough to be visible to SeaTools, run both Seagate diagnostics. Upon failing this test, a RMA form will be automatically generated for you. Please print this form or save it to a floppy to be printed on another computer. This form contains instructions on what to do next.\n\nIf the drive cannot communicate with your computer, a blank RMA form is available by holding down the \"Alt\" key and pressing the 'r' key on the main screen."
218, "Undetermined file or directory path"
219, "System Analysis Failure. Error "
220, "SeaTools was unable to analyze your system's hardware and therefore cannot continue."
221, "There were no hard disc drives detected."
222, "Warning!"
223, "SeaTools Desktop was developed to assess the integrity of your hard disc drives."
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
224, "Before Starting the Utility"
225, "This utility can only diagnose problems with hard drives that are recognized by your system. If your drive is not recognized by your system, shut down now and check the following:\r\n - All power and interface cable connections are correct.\r\n - All drive jumpers (i.e. SCSI ID, SCSI-Termination, SCSI-Termination Power, ATA-Master, ATA-Slave)\r\n are set correctly.\r\n - System BIOS (Host Bus Adapter for SCSI) is configured correctly.\r\nIf you suspect your problems may be caused by software or operating system issues, you should run a file structure or a file de-fragmentation utility (i.e., SCANDISK, DEFRAG)."
226, "*** PROBLEMS ENCOUNTERED ***\nIt appears that your ATA or SCSI drive was unable to complete all of the selected tests OR has one or more problems. These problems may or may not be with the drive itself. Please click on the \"VIEW DETAILED REPORT\" Button below for more information. \n\nIt is highly recommended that you run the the Full Seagate Diagnostic which can help you determine which files reside on damaged areas of the drive.\n\nIf you need further help, our Technical Support department will be happy to help. If you cannot access any of the data on the disc drive, you may want to consider data recovery services. Click on the \"Help\" button for more information."
227, "Select a drive to test"
228, "Unknown"
229, "No Label"
230, "Unknown Drive Type"
231, "FAT12"
232, "FAT16"
233, "FAT32"
234, "NTFS"
235, "%d Bytes"
236, "Intel 80386 or equivalent"
237, "Intel 80486 or equivalent"
238, "Intel Pentium or equivalent"
239, "Select the diagnostic tests you wish to perform"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
240, "System Memory Test"
241, "Writes and reads back data patterns in Random Access Memory. The test ensures your system memory is OK."
242, "SMART Status Check"
243, "Reads the Self-Monitoring, Analysis, and Reporting Technology status of the selected drives, offering early warning of failures that could lead to data loss."
244, "90 Second Test"
245, "Verifies with 90% accuracy the physical integrity of the media. The test is completed within 90 seconds."
246, "File Structure Test"
247, "Examines FAT and NTFS partition, volume, directory, and file information. The test determines if there are data file structure errors in any partitions or volumes."
248, "Complete Surface Scan"
249, "Verifies the physical integrity of the media. The scan performs a complete, sector-by-sector read of the selected hard disk drives."
279, "\n\nS.M.A.R.T., (S)elf (M)onitoring (A)nalysis and (R)eporting "
280, "(T)echnology, a built-in hard disk drive failure prediction method "
281, "reports an 'Alert' if a problem has occurred. It reports 'Passed' "
282, "if no problems are found and 'Unsupported' if a hard disk drive "
283, "does not support S.M.A.R.T.\n"
284, " Invalid BPB"
285, " Extended partition table invalid"
286, " Invalid MBR\n"
287, " Invalid secondary MBR\n"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
288, " Invalid media descriptor"
289, "\nIO Channel type "
290, "ISA"
291, "\n\nUse of the diagnostic and this information is controlled by the license agreement included with the SeaTools software product. Any use for commercial or financial gain, including but not limited to, use in performing technical, consulting or data recovery services is prohibited without the prior written approval of Kroll Ontrack Inc.\n"
302, "\n\nPARTITION CYLINDER SIZE\n---------- ------------ ----\n # Type Start End MB"
303, "\nPartition Check Results:"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
304, "\n %-2d %-7s %-5lu %-5lu %-7lu"
305, "\n Not Checked. Unsupported (or Unknown) Partition"
306, " Partition "
307, " Result: "
308, "Passed"
309, "Passed with Minor Error(s)"
310, "\nPassword-protected"
311, "PCI"
312, "PM"
313, "\n PRIMARY"
314, "\nProcessor "
315, "\nRecommendation:\n"
316, " Sector "
317, "If you are not experiencing data loss and SeaTools reports File System Structure errors, they may be caused by a lock-up or failure to shutdown Windows correctly. Many times, these errors may be repaired through normal system maintenance. If you are experiencing a hardware error, you should isolate the cause and replace the failing component. If you are unsure how to proceed with repairs, contact a computer professional. After completing any maintenance tasks, run SeaTools again to verify that all errors have been repaired. If errors continue to occur, the system may not be stable. Again, contact a computer professional.\n\n"
318, "All selected diagnostics passed.\n\n"
319, "If you have experienced a data loss, cease drive operation immediately. Professional data recovery service is the best option to recover your data.\n"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
320, "Contact the manufacturer of the hard disk drive that shows a SMART alert for their recommendation.\n\n"
321, "\n"
322, "A physical problem has been detected, please run Complete Surface Scan test.\n"
323, "Skipped"
324, "Alert"
325, " SMART Status Check Result: "
326, " File Structure Test Result: "
327, " Complete Surface Scan Result: "
328, "\n\nSystem Information:"
329, "\n %s Result: %s"
330, "SeaTools Desktop"
331, "\nV"
332, " "
333, "\nReport file created "
334, "\n\nThe following information has been generated by the SeaTools Desktop. Use this information to help you recognize and resolve potential data access problems in a timely manner.\n"
335, "Unsupported"
}
STRINGTABLE
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
{
336, " (Unknown or unsupported partition(s) skipped)\n"
337, "\n %u KBytes in "
338, "%u files"
339, "Scanning for drives..."
340, "For maximum performance, the mouse has been disabled. To cancel the scan, press \"Alt-C\", otherwise wait for the scan to complete. Press the \"Help\" button for more information."
341, "Open"
342, "Close"
343, "Back"
344, "A bad sector has been found, and it MAY BE IN USE. SeaTools can try to write to this sector in an attempt to relocate it. However, doing so may prevent data recovery possibilities.\n\nAttempt to overwrite the bad sector? If you are unsure, click No and consult the help option."
345, "Always overwrite sectors that may be in use?"
