5085 Please hold down the Ctrl key when using the record button.\n\nSee the Device Controls Record Properties page to change this feature.
5086 Device Controls Properties
5087 NoneHammingTriangularKaiser 7
5088 Cannot send audio data to the device.
5089 Cannot prepare sound for recording.
5090 Sound is currently in use by another device.
5091 No timers available. Please close other applications\nto free timers and restart GoldWave. If the problem\npersists, your sound driver may be at fault. You may\nneed to completely remove and update the driver.
5092 No output device drivers have been installed in this system.
5093 No input device drivers have been installed in this system.
10101 Could not open file. Make sure the file exists and is not being used in another program.
10102 Audio file type or format is unexpected.
10103 Audio data in file is corrupt.
10104 There is not enough free memory available. Try closing one or more applications to free some memory.
10105 Could not read from original sound file. Make sure the disk is ready and the file has not been deleted.
10106 Could not write data to disk. Make sure there is ample space free on the disk or change temporary folder setting.
10107 Unknown file type or format.
10108 File gives a length of 0 for audio data or audio data is missing! Sound cannot be read.
10109 Wave file is missing 'fact' chunk. Sound cannot be opened.
10110 File contains two or more sounds with different formats. Sounds cannot be read.
10111 Could not create file. Make sure the file is not opened in another program (Jukebox) or marked as Read-only and that temporary folders are set correctly under Options | File.
10112 Operation aborted by user.
10113 Calculation error: division by zero, overflow, or invalid floating point.
10114 Audio format converter is missing or unable to convert audio data to specified format. Try saving as a different file type.
10302 Cannot open undo file. Check undo folder setting and restart.
10303 Not enough free memory available for undo.
10304 There is not enough disk space to prepare undo file. Continue?
10305 Could not read from undo file.
10306 &Undo %s Ctrl+Z
10322 All
10323 Flash
10324 1 second
10325 10 seconds
10326 30 seconds
10327 1 minute
10328 5 minutes
10329 10 minutes
10330 30 minutes
10331 1 hour
10332 2 hours
10500 Volume
10501 Delay
10502 Offset
10503 Fade
10504 Initial volume
10505 Quality
10506 Time
10507 Rate
10508 Fine tune
10509 Input volume
10510 Mix volume
10511 Fixed delay
10512 Depth
10513 Frequency
10514 Feedback
10515 Decay time
10516 Threshold
10517 Zoom
10518 User zoom
10519 Initial
10520 Final
10521 Steepness
10522 From
10523 To
10524 Relative change
10525 Cancel
10526 Track
10527 End
10528 GoldWave Sound
10529 Open
10530 Play
10580 %
10581 s
10582 ms
10583 Hz
10584 kbps
10700 Background
10701 Selection Background
10702 Outside
10703 Left Unselected
10704 Left Selected
10705 Right Unselected
10706 Right Selected
10707 Selection Markers
10708 Position Marker
10709 Grid
10710 Numbers
10711 Direct Editing
10800 Finished
10801 Syntax error
10802 Missing operand
10803 Missing operator
10804 Unmatched '('
10805 Unmatched ')'
10806 Function needs '('
10807 Divide by zero
10808 General calculation error
10809 Internal stack error!
10810 Overflow error
10811 Underflow error
10812 Destination range error
10813 Number of 'wave#' does not exist
10814 Stopped by user
10815 Not enough memory
10816 Could not access or prepare sound
10850 Evaluate
10851 Evaluator
10852 Expression name is missing or invalid. Please type in or select an expression name. Names cannot contain ']', '[', ';', or '='.
10853 Group name is missing or invalid. Please type in or select a group name. Names cannot contain ']', '[', ';', or '='.
10854 The specified Group/Expression does not exist. Please select the correct names from the lists.
10855 Given group name is reserved for internal use only. Please use a different name.
10856 Create the new group "%s"?
10857 Overwrite expression "%s" with the current one?
10858 Not enough memory to save expression.
10901 Data Error
10902 entry error.\nPlease enter numbers only.
10903 Range Error
10904 is out of range.\nValid range:
10905 entry error.\nPlease enter a floating point number.
10906 Time Format Error
10907 entry error.\nPlease separate time into hours, minutes, and seconds using colons
10908 entry error.\nOnly three numbers may follow the decimal point.
10909 entry error.\nDecimal point should only appear after seconds.
10910 entry error.\nOnly 2 numbers may appear between colons. Use a '.' after seconds when specifying milliseconds.
10911 entry error.\nA value greater than 59 is not allowed for minutes or seconds in the given format.
10912 entry error.\nToo many colons have been entered. Make sure you have a '.' instead of a ':' after seconds.
10913 entry error.\nPlease enter the time in one of these formats: HH:MM:SS.TTT, MMM:SS.TTT, or SSSSS.TTT
10914 Please select a folder
10915 Delete preset "%s"?
11000 File structure contains inconsistent data and may be corrupt.\nContinue?
11001 Wave file RIFF chunk size is incorrect.\nContinue?
11002 Wave file may be truncated or not properly aligned.\nContinue?
11003 Wave file is missing the 'fact' chunk or gives zero samples.\nContinue?
11004 File contains sounds with different sampling rates.\nContinue?
11005 File contains no length information.\nDetermining the length could take several minutes.\nContinue?
12001 Using reverb with a volume greater than 100% may cause feedback overflow.
12002 Coefficients entry error. Please enter floating point numbers (magnitude < 10000) separated by commas.
12003 Number of coefficients for a(n) and b(n) do not match or too many coefficients.
12004 Cannot access or find path:\n
12005 Could not recognize clipboard format or not enough free memory.
12014 Cannot save a flashed file. Please deflash the file before saving.
12015 Please find and replace all old copies of BWCC with the newer one included with GoldWave (see README.TXT). Please exit now.\n\nOld file:
12016 Old version of BWCC Detected
12017 File has been converted and saved to disk.\nUpdate the Sound window with the new format?
12018 Filter width is too narrow.
12019 Coefficient b(0) must not be near zero.
12020 No audio found in source file.
12021 Audio could not be saved to destination file.
12023 Please enter all the necessary information.
12030 Please insert an audio CD into the drive.
12031 Could not read table of contents from CD.
12032 Could not find a compatible CD-ROM drive.
12033 Could not open the CD-ROM drive. Try changing the 'read technique' setting.
12034 Could not synchronize audio data.\nTry disabling the 'fix defects' option if problem persists.\nContinue extraction anyway?
12035 Could not read from CD-ROM drive.\nPlease see the help for more information.
12036 No ASPI driver installed. Cannot access CD-ROM drive.
12037 CD Audio Extraction Error.
12040 Only some stereo recordings allows vocals to be removed.\nThe stereo image will be lost. Continue?
12041 The source filename and destination filename are the same.\nFile cannot overwrite itself unless you Deflash it first.
12045 File size exceeds 2 billion bytes and cannot be created.
12050 GoldWave cannot find an MPEG/MP3 encoder. Show more information?
12051 GoldWave cannot find an MP3 decoder. Show more information?
12052 GoldWave cannot find the Ogg Vorbis codec. Show more information?
12053 You must use the "Tools | CD audio extraction"\ncommand to extract audio from a CD.
12059 Attributes include a rate. The rate given in the Rate box will be\nignored (uncheck the Rate box to avoid this message).
12060
12061 Opening:
12062 Creating:
12063 Error:
12064
12067 Converted %d of %d files. Errors: %d.
12068 This filename already exists.
12069 Filename could not be assigned to new file.
12070 Not enough memory to change cue point.
12071 Cannot place start marker after finish marker.
12072 Cannot place finish marker before start marker.
12073 Cannot place finish marker outside file limits.
12074 New
12075 Start
12076 Finish
12077 Cue points are saved only in Wave files. If you need to preserve the cue points, choose Cancel and save this file as a Wave.
12078 File contains no divisible cue points and cannot be split.
12079 Filename already exists and will not be overwritten.
12080 File must have a sampling rate of 11025Hz, 22050Hz, or 44100Hz.\nUse the "Effects | Resample" command to adjust the rate before\nsplitting and setting cue points.
12900 This file already exists.\n\nReplace existing file?
12901 'To' time must be later than 'From' time.
12902 Search range must be less than window size.
12990 This demonstration version is limited to 45 seconds of audio.\nPlease visit http://www.goldwave.com to purchase the full version.
24310 Quits GoldWave and prompts to save sounds
24320 Edit operations
24321 Reverses the last operation
24322 Cuts the selection and puts it on the Clipboard
24323 Copies the selection and puts it on the Clipboard
24324 Inserts the clipboard contents at the start marker
24325 Deletes the selection
24330 File operations
24331 Creates a new sound window
24332 Opens an existing sound
24333 Saves this sound
24334 Saves this sound with a new name
24335 Reverts changes to last time sound was saved
24339 Closes this sound
24341 Create a new view for this sound
24360 Window arrangement and selection
24361 Cascades open windows
24362 Tiles open windows
24363 Tiles open windows horizontally
24364 Arranges iconic windows along bottom
24365 Closes all open windows
28011 Media Player: Required for MP3, AVI, MOV files.
28012 BladeEnc: Required for saving as MP3.
32450 Shell failure
32451 TShellMalloc::Alloc failed.
32452 Invalid Path
32453 IShellFolder::BindToObject failed.
32454 ::SHGetDesktopFolder failed.
32455 ::SHGetSpecialFolderLocation failed.
32456 IShellFolder::GetAttributesOf failed.
32457 ::SHGetFileInfo failed.
32458 IShellFolder::GetDisplayNameOf failed.
32459 ::SHGetPathFromIDList failed.
32460 IShellFolder::SetNameOf failed.
32461 IShellFolder::GetUIObjectOf failed.
32462 IShellFolder::CompareIDs failed.
32463 TShellItem is invalid.
32464 IShellFolder::EnumObjects failed.
32465 IEnumIDList::Clone failed.
32466 Attempt to read past end of TShellItemIterator list.
32467 IEnumIDList::Next failed.
32468 IEnumIDList::Skip failed.
32469 IEnumIDList::Reset failed.
32470 IEnumIDList pointer is zero.
32471 ::SHGetMalloc failed.
32472 IExtractIcon::GetIconLocation failed.
32473 IExtractIcon::Extract failed.
32474 TShellItem::Rename attempted on item that cannot be renamed.
32475 TShellItem::Copy attempted on item that cannot be copied.
32476 TShellItem::Move attempted on item that cannot be moved.
32477 TShellItem::Delete attempted on item that cannot be deleted.