home *** CD-ROM | disk | FTP | other *** search
- CDCOPY.EXE V3.808 (C) by Markus Barth
- =====================================
-
- This module allows you to write audio-tracks from CD
- to disk. Registered users are able to write these files
- to a CD-Writer.
-
- Running under Windows-95 the program only works
- with SCSI or ATAPI-CDROM/CD-R, which support this
- special mode.
-
- Using WINDOWS-NT it is possible to use the generic WIN32
- interface to read the CDDA-tracks. By default, the module
- starts detecting an ASPI-interface. If it is not available
- the generic interface is used.
-
- The following hardware was tested:
- Adaptec 2940, Plextor CD-ROM 8XCS,
- RICOH 1420C,
- TOSHIBA 3401
- PIONEER DR-U24X (Reads CDDA 3X!!!)
- UltraPlex (Reads CDDA 25X!!)
-
- It's fully functional under Windows-95 and Windows-NT 3.51/4.x.
-
- For both operating systems I used EZ-SCSI 4.00, 4.01
- as ASPI-interfaces.
-
- The following versions were tested:
-
- WNASPI32.DLL 22528 -> EZ-SCSI 4.01
- WNASPI32.DLL 21504 -> EZ-SCSI 4.00
-
- Attention - please copy the CDCOPY.INI file to the Windows / Winnt
- directory!
- Information about the configuration and usage of the module is
- located in the attached helpfile (CDCOPY.HLP) Troubleshooting.
-
- If you have any suggestions or errors reports please feel free
- to send me an e-mail. The actual version of CDCOPY is always
- available at:
- http://members.aol.com/mbarth2193 or
- http://www.actadivina.com/~cdcopy
- Please send feedback about supported drives!
-
- If you report any problems, please send the following
- information:
-
- Version of CDCOPY you use
- Vendor of your CDROM/CDR
- Operating system
- Which interface you use ASPI or WIN32 for Windows-NT
-
-
- Credits:
- Special thanks to A. Katranis (A.Katranis@gmx.net) for
- excessive testing and permanent incentive.
-
-
- Attention!
-
- Starting with version 3.701 I have to change the Freeware
- status to Shareware. Excessive bills for my internet
- activities doesn't allow me to improve CDCOPY for free.
- Answering many e-mails, updates etc. are too expensive.
-
- So if you want to make the CDCOPY-project go further
- send 20 US $ to:
-
- Markus Barth
- Holzmarkt 2
- 52511 Geilenkirchen
- (Germany)
-
- Profit-making organizations may use this software only with
- explicit written permission with payment to the author.
-
- M. Barth - mbarth2193@aol.com
- barthm@home.ivm.de
-
- Versions:
- 3.808 - Save default MP3 Tag information
- 3.807 - TOMPG support, error Toshiba speed setting
- 3.806 - conversion from the CDDB format to CSV
- error l3codec compression
- 3.805 - sound normalization, delete CDDB batch files
- direct L3Codec support, speed up Xing encoding
- 3.804 - minor corrections
- 3.803 - Writing lyrics to MP3-WAV, MPA, MP3-file, Alert function
- improved Xing encoding speed
- 3.802 - Batchmdoe for CDDB queries, invert selection
- support for lyricsserver www.lyrics.ch
- 3.800 - Batchmdoe for several drives, pregab setting
- 3.711 - minor error corrections
- 3.710 - Playlistgeneration, MITSUMI CD-R, alternate Matsushita mode,
- error proxyserver, time information, filename template
- 3.709 - minor error corrections, and enhancements
- 3.706 - Extended ATAPI-support - many new drives, tracktime
- Support for Xing MPEG Encoder, Proxyserver support,
- 3.703 - Albumname, http-port modification
- 3.702 - Error Toshiba-Powermode
- Some error-corrections
- 3.701 - http-protocoll for cddb access, quickmode option
- powermode, speed information, advanced options
- 3.608 - Supress 0 samples, SCSI-Info, error NEC drives,
- minor enhancements, speedselection, support
- for IBM, Cyber drives
- 3.606 - error corrections
- 3.605 - RICOH MP drives, MP3-ID TAG, DAO-CUE-Sheet
- generation
- 3.603 - Corrected some bugs
- 3.602 - Jitter correction using WIN32 interface,
- statusinformation during CDDB communication
- 3.600 - Writing of MP3-WAV files through L3CODEC of
- Fraunhofer Inst., Path for CDDB-files,
- Options "Save tracknumber", "Save artist"
- 3.505 - Submission of new CD-information to CDDB
- 3.502 - Buffered reading for some drive-types
- fixed some minor bugs
- MP3CompPath - variable in CDCOPY.INI
- 3.500 - Read artist, title etc. from internet-database
- CDDB, support for ATAPI-interface for Windows-95,
- support for MATSHITA/PANASONIC drives.
- 3.001 - Call MP3-Compressor to generate MP3 - format
- 3.000 - Save options
- Jitter correction for some drives
- 2.005 - Select/Deselect whole CD, retry failed reads
- speed up reading ASPI-interface for some drive-types
- 2.003 - Corrected some bugs
- 2.002 - Select down to frame using track excerption
- 2.001 - Support for TEAC (SCSI) drives
- 2.000 - Support of MPG format (MPEG 1 layer 2)
- Extreme small files and extreme slow when packing
- Best MPG - Player : MAPLAY
- http://www-inst.eecs.berkeley.edu/~ctsay/mp2win32.html
- 1.700 - Added space information for tracks
- 1.604 - Corrected error reading non-buffered mode using generic
- interface
- 1.603 - Added support for HITACHI drives
- 1.602 - Corrected some bugs
- 1.600 - Support for RICOH drives (ASPI)
- 1.500 - Choice of CDROMs/CDRs using a combobox and
- buffered reading using generic interface
- 1.400 - Save tracks using title of CDPLAYER.INI or chosen name
- 1.300 - Added tooltips, nicer buttons
- Dialog to save a part of a track
- 1.200 - Saving soundfiles as WAV, AU or RAW
- Classic-mode (Writing subsequent tracks of live or
- classic-CD in one file without pause)
- 1.100 - IDE-Support using generic WIN32 interface
- 1.005 - Support for HP-Writer
- 1.004 - Overread defect sectors
- Show content of CDPLAYER.INI if available
-