61441 Setup cannot update your %1 files because the language\ninstalled on your system is different from the update language.
61442 %1 Setup cannot update a checked (debug) system with a free (retail) version of %2, or vice versa.
61443 There is not enough disk space on %%s to install %1. Setup requires a minimum of %%d additional megabytes of free space or if you also want to archive the files for uninstallation, Setup requires %%d additional megabytes of free space. Free additional space on your hard disk and then try again.
61444 You do not have permission to update %1.\nPlease contact your system administrator.
61446 Setup could not find the setup.log file\nin your repair directory.
61447 Setup could not find the update.inf file\nneeded to update your system.
61448 %1 has been updated.\nRemove any disks from the floppy disk drives\nand choose OK to restart your computer.\n\nIf you change or add any components to your system,\nyou will need to reapply the Hotfix.
61449 %1 installation did not complete.
61450 %1 Setup was unable to shutdown system.\nPlease shutdown your system manually.
61451 Could not locate entry for HAL.DLL in SETUP.LOG to determine type of HAL to update.
61452 The %1 %2 file is not correct.
61453 %1 Setup canceled.
61454 This %1 is for a different hardware platform.
61455 %1 Setup
61456 %1 Setup Warning
61457 %1 Setup Error
61458 The file %s is open or in use by another application.\n\nClose all other applications and then click Retry.
61459 %1 Setup could not backup registry key\n%%s\%%s\nto file %%s\%%s. %%s\n
61460 %1 Setup could not backup registry value\n%%s\%%s,\'%%s\'. %%s\n
61461 %s\n\nSelect 'OK' to undo the changes that have been made, or select 'Cancel' to quit. If you select 'Cancel', your system will be left in a partially updated state and may not work correctly.
61462 %%s\n\n%1 has been partially updated and may not work properly. It is recommended that you use your Emergency Repair disk to repair your system. To do this, insert the %2 Setup Boot Disk into the floppy drive, restart your computer, and then select the Emergency Repair option.
61463 Are you sure you want to cancel?
61464 %1 %2 Uninstall Directory
61465 %1 %2 Source Files
61466 %1 System Files
61467 %1 Setup found hotfixes on your system.\nWould you like to install these hotfixes now?\n
61468 You have already created an Uninstall directory.\nDoing this again will overwrite your current uninstall directory.\nAre you sure you want to do this?\n
61469 %%s\n\nYour computer vendor installed this file on your computer.\nDo you want %1 Setup to replace this file?
61470 Failed to install catalog files.\n
61471 Failed to add registry entry.\n
61472 Setup has detected that the build version of the system installed\ndoes not match the update you are applying to it.\n\nYou can only install this update on Build %d to Build %d .
61473 The version of Windows you have installed does not match the update you are trying to install.
61474 %1 Setup could not start the hotfix installation program.
61475 %1 Setup could not locate the %2 files.
61476 WARNING:\nYou have chosen to overwrite your existing uninstall:\n\n %s\n\n\nIf you continue, you will only be able to uninstall to the following Service Pack version: \n\n %s\n\n\nAre you sure you want to continue?\n\nClick Yes to continue creating the uninstall, No to not create the uninstall.
61478 This Web-based version of Service Pack Setup requires Internet Explorer 3.0 or later.\n\nFor instructions on how to download a version of the Service Pack that does not require a Web connection during installation, go to the %1 Service Pack Web site and select "Problems Downloading the Service Pack."
61479 This %1 has not been qualified by your hardware vendor for installation on this copy of %2 Datacenter Server.\n\nPlease contact your hardware vendor for additional information on obtaining a %3 that has been qualified for your system configuration.
61480 Not all files necessary to perform an integrated installation are present.
61481 Cannot install %1.\nThe Print Spooler service is not started.
61482 The system must be restarted before installing the %1, to allow some prior file update operations to complete. (These operations were previously scheduled by some other install or uninstall operation.)
61483 You do not have enough free disk space on %%s to archive the uninstall files. To install %1 with backup files for uninstall, an additional %%dMB is required.
61484 Unable to locate RSAENHS.DLL in the update directory, high encryption for uninstall aborted.
61485 Unable to locate UPDENCIN.INF in the update directory, high encryption for uninstall aborted.
61486 Unable to locate UPDENCTS.INF in the update directory, unable to export TS files.
61487 High encryption ENCINST process failed.
61488 High encryption upgrade failed.
61489 UPDATE [-u] [-f] [-n] [-o] [-z] [-q] [-l] [-s:<dir>] \n\n -u Unattended mode\n -f Force other programs to close when the computer shuts down \n -n Do not back up files for uninstall\n -o Overwrite OEM files without prompting\n -z Do not restart when installation is complete\n -q Quiet mode (no user interaction)\n -l List installed hotfixes\n -s:<dir> Integrate Service Pack files into <dir>\n
61490 Creating file %s
61491 Downloading files and patches
61492 Backing up files
61493 Backing up file %s
61494 Installing files
61495 Installing file %s
61496 Finishing installation
61497 Welcome to the %1 \n%2 Setup Wizard
61498 &Restart
61499 %1 installation is complete. You must restart your computer for the %2 update to take effect.
61501 Please wait while %1 Setup updates your system files.
61502 Must accept license agreement before installing
61503 %1 Setup needs to connect to the internet now to download %2 files and patches for installation.
61504 %1 Setup is ready to begin replacing system files.
61505 Connecting to %s
61506 Connected to %s
61507 estimate
61508 minutes
61509 seconds
61510 %dKB remaining%s
61511 Download complete
61512 Download complete, now unpacking files
61513 The following error occurred while %1 Setup attempted to download the %2 files from the Internet:\n\n
61514 The server did not respond (error code %d).
61515 The server did not respond.
61516 If this error persists after you have clicked Retry several times, go to the %1 Service Pack Web site and select "Problems Downloading the Service Pack." This will give you instructions on how to download a version of the Service Pack that does not require a Web connection during installation.\n
61517 %1 Setup determined that the following downloaded %2 file is corrupt:\n\n
61518 %1 Setup determined that the following downloaded %2 files are corrupt:\n\n
61519 %1 Setup was unable to download all the %2 files necessary for installation.\n
61520 Copied file (delayed):
61521 An error has occurred copying files from the Service Pack share to the distribution share.
61522 Integrated install has completed successfully.
61523 Failed to copy some or all of the files necessary for integrated install.\n\nPlease check that:\n a) No network or copy errors occurred during the integration process\n b) The format of the destination directory is correct.\n The files to be integrated must reside in an i386 or nec98 directory\n (i.e. for an i386 share, if you typed "update /s:c:\cdshare", the files must be in the c:\cdshare\i386 directory).
61524 Service Pack started with following command line
61525 bytes downloaded.\n\n
61526 No Service Pack
61527 The file %%s is missing from the %1 installation.\nThe file must be present for %2 Setup to continue.\n\nPress OK to cancel Setup.
61528 %1 Setup is ready to begin upgrade of uninstall to high encryption.
61529 Integrated install failed. The language type for the destination directory and %1 must be the same.\n
61530 Error opening %1 file
61531 Skipped copying file:
61532 Copying file %s
61533 In order to successfully complete this installation, the following services will automatically be stopped and re-started.
61534 Setup was unable to stop the following service:%s
61535 A reboot will be required in order to successfully complete this installation. Do you wish to continue?
61536 ERROR: The update has completed successfully, but the installer was unable to re-start the following service:%s.
61537 %1 Setup encountered an error:
61538 Copied file:
61539 Starting process:
61540 The update.ver file is not correct.
61541 US/Canada Only, Not for Export
61542 Domestic Use Only
61543 US and Canada Use Only
61546 Setup has detected that the Service Pack version of the system installed\nis newer than the update you are applying to it.\n\nYou can only install this update on Service Pack %d.
61547 Setup has detected that the Service Pack version of the system installed\nis newer than the update you are applying to it.\n\nYou can only install this update on a computer with no Service Packs installed.
61548 Setup failed to access or correctly modify your SETUP.LOG file.
61549 The version of software you are running does not match\nthe system you are running it on.
61550 Failed to completely copy all of the updated files.
61551 Failed to set the directory.
61552 An error in updating your system has occurred.
61557 %1 has been updated.\n\nYou must reboot for these changes to take effect.\n\nIf you change or add any components to your system,\nyou will need to reapply the Hotfix.
61558 Setup has detected that the version of the Service Pack\ninstalled on your system is lower than what is necessary to apply this hotfix.\n\nAt minimum, you must have Service Pack %d installed.
61560 You cannot uninstall, since an uninstall for this hotfix has not been created.
61562 %1 has been updated.\n\nIf you change or add any components to your system,\nyou will need to reapply the Hotfix.
61563 %1 Hotfix successfully uninstalled.
61564 The existing file %s contains High Encryption security, but the updated Hotfix file %s contains only Standard Encryption security. You can choose to replace the High Encryption security file with the updated Standard Encryption security file now, or you can skip this file to retain the existing file containing High Encryption security. See the readme.txt file for information on obtaining the updated High Encryption security components.
61567 Hotfixes have been found on your system.\nWould you like to Uninstall these hotfixes now?\n
61568 An old Uninstall directory has been found. Would you like to overwrite this directory with new Uninstall information?\n
61569 You have chosen to decline the License Agreement.\nSetup cannot continue.\n
61570 No LICENSE.TXT file was found in your Hotfix directory.\nSetup cannot continue.\n
61571 Insufficient resources are available.\nSetup cannot continue.\n
61573 This old uninstall directory cannot be used to uninstall this Hotfix, and should be deleted. Would you like to delete it now?\n
61574 The following hotfixes are installed:\n\n
61575 No Hotfixes are installed.\n
61576 Catalog file versions are equal, although catalog files differ.\nInstall package must be rebuilt.\nFailed to install catalog file.\n
61577 Windows NT 4.0
61578 Windows 2000
61579 License Agreement
61580 Select Options
61581 Updating Your System
61582 Before you install this update, we recommend that you:\n\n - Update your system repair disk\n\n - Back up your system\n\n - Close all open programs\n\n\nTo complete this installation, Windows might require restarting after you finish this wizard.\n\nTo continue, click Next.
61583 Please read the following license agreement. To continue with setup, you must accept the agreement.
61584 I &Do Not Agree
61585 I &Agree
61586 If you want to remove %1 later, Setup must archive the necessary files. However, this requires significant disk space. Do you want Setup to archive these files?
61587 &Archive Files
61588 &Do Not Archive Files
61589 Please wait while setup inspects your current configuration, archives your current files and updates your files.
61590 Inspecting your current configuration
61591 Inspecting:
61592 Details
61593 Completing the %1\n%2 Setup Wizard
61594 You have successfully completed the %1 Setup Wizard. \n\nTo apply the changes, the wizard has to restart Windows. To restart Windows automatically, click Finish. \n\nIf you want to restart later, select the Do not restart now check box, and then click Finish.
61595 You have successfully completed the %1 Setup Wizard.\n\n To close this wizard, click Finish.
61596 &Do not restart now
61597 %1 %2 Setup Wizard
61598 Checking for necessary space
61599 Creating Cabinets
61600 Updating the registry keys
61601 Cancel
61602 Unpacking: %d remaining
61603 No %1
61604 &Read Me
61605 readmesp.htm
61606 Integrated install failed. The destination directory contains an evaluation copy of Windows.\n
61607 Windows XP
61608 No UnInstall directory
61609 Service Pack
61610 Windows
61611 For Setup to continue, the print spooler service must be enabled on this computer. To enable this service, click OK. After Setup is complete, the print spooler will be disabled.
61612 UPDATE [-u] [-f] [-n] [-o] [-z] [-q] [-l] \n\n -u Unattended mode\n -f Force other programs to close when the computer shuts down \n -n Do not back up files for uninstall\n -o Overwrite OEM files without prompting\n -z Do not restart when installation is complete\n -q Quiet mode (no user interaction)\n -l List installed hotfixes\n
61613 Verdana Bold
61614 Select an existing folder or make a new folder in which to store uninstall information.
61615 You have selected a folder that is not on your local computer. The current state of the computer can be archived only on your local computer.
61632 Setup cannot install this hotfix because one or more of its files are out of date. Please download and install the latest\nversion of fix %2.
61633 This service pack contains files that are missing some of the fixes which were previously installed on this computer. \nTo prevent possible problems, these files will not be installed by the service pack.
61634 In order to have the fixes contained in both the service pack and the previously installed hotfixes, you must obtain and\ninstall the updated versions of the following hotfixes prior to or following the service pack installation. These hotfixes\nare also listed in the svcpack.log file.
61635 Do you want to continue installing this service pack?
61636 The service pack install cannot continue until these hotfixes are applied to your system.
