Text = "Enter your user data into the corresponding fields.\n\nThe data entered here will be used as default entries in some fields, for example in templates for letters and faxes.";
End
HelpText gid_Help_Installmode
ID = "PAGE_INSTALLMODE";
Text = "The Standard installation is recommended for normal users. It generally installs all components together with a selection of filters.\n\nThe Custom installation shows a dialog in which you can select the individual components to be installed.\n\nThe Minimum installation only installs those components needed to run the application. This option does not install the Help or most of the sample documents and templates.";
End
HelpText gid_Help_InstallPath
ID = "PAGE_INSTPATH";
Text = "Specify the directory where this product is to be installed. This folder will then be used to create several files and sub-folders.";
End
HelpText gid_Help_Reinstallation
ID = "PAGE_REINSTALLATION";
Text = "Modify Installation:\nUse this procedure to either delete individual components that have already been installed or to install additional ones.\n\nDeinstallation:\nThis procedure will delete the files and folders created by the setup program during installation. Files and folders created by the user after installation will not be deleted.\n\nRepair:\nThis option re-enters the application into your operating system's registry. An attempt will be made to restore inadvertently deleted program files.";
End
HelpText gid_Help_Uninstall
ID = "PAGE_UNINSTALL";
Text = "The files and folders created by the setup program during installation will be deleted. Files and folders created by the user after installation will not be deleted. All of the files needed to run the setup program will not be deleted either. If you want you can have all the files deleted.";
End
HelpText gid_Help_Userdefined
ID = "PAGE_USERDEFINED";
Text = "This is where you select the components to be installed. Note that you can select or deselect individual text filters, graphic filters, dictionaries, etc.\n\nThe Default button will reset your changes to the default settings.\n\nIf you want to add or delete components in an existing installation at a later date, call the Setup program again and select the desired components.\n\nBy default, all components marked by a colored box next to the name are installed. If you do not want to install a component, click the respective box. A colorless box indicates the components which will not be installed or are to be deleted from an existing installation. Each click on a box changes it from colored to colorless and vice versa and the component will be installed or deinstalled/not installed.\n\nIf you click the plus sign next to a component, a list of related components is displayed. These can also be installed or deinstalled as described above. A gray box indicates that some components in that group are to be installed and some are to be deinstalled/not installed.";
End
HelpText gid_Help_Welcome
ID = "PAGE_WELCOME";
Text = "Welcome to the installation.\n\nFor a detailed description of the installation procedure refer to the Setup Guide.\n\nIn several of the Setup program dialogs there are also Help buttons which access specific information about the settings.";
End
HelpText gid_Help_WrongSetup
ID = "PAGE_WRONGSETUP";
Text = "The application is already installed on your system (a sversion.ini or an sofficerc file with a matching entry has been found).";
End
HelpText gid_Help_Migration
ID = "PAGE_MIGRATION";
Text = "%PRODUCTNAME can adopt personal data and configuration settings from a previous %PRODUCTNAME installation. To take advantage of this, activate the 'Import personal data' field. The path to the directory in the previous installation appears. If you do not want to accept data and settings from a previous version, unmark the 'Import personal data' check box.";
End
Slide gid_Slide_1_Open
Order = 1;
Text = "Welcome to %PRODUCTNAME %PRODUCTVERSION!\nThank you for choosing %PRODUCTNAME %PRODUCTVERSION. We have designed %PRODUCTNAME %PRODUCTVERSION to provide all the tools you need to get your work done quickly and easily. We hope you enjoy your new productivity!\n\nThe %PRODUCTNAME Team";
FontSize = 14;
Bitmap = "allgemein_o.bmp";
FadeType = "FadeEffect_ROLL_FROM_TOP";
TextWidth = 350;
TextHeight = 250;
BitmapPosX = 80;
BitmapPosY = 100;
End
Slide gid_Slide_2_Open
Order = 2;
Text = "%PRODUCTNAME Writer - Word Processing at its Best.\nCompose letters, memos, brochures and newsletters using %PRODUCTNAME Writer's rich word processing functionality. Your work will be letter perfect with automatic spellchecking and correction. Collaborate with team members and keep track of everyone's input. Publish your documents on the Web without knowing HTML.";
FontSize = 14;
Bitmap = "writer_o.bmp";
FadeType = "FadeEffect_VERTICAL_LINES";
TextWidth = 350;
TextHeight = 250;
BitmapPosX = 80;
BitmapPosY = 100;
End
Slide gid_Slide_3_Open
Order = 3;
Text = "%PRODUCTNAME Calc - Powerful calculation and analysis.\nTurn your numeric data into valuable information using %PRODUCTNAME Calc's charting and analysis tools. Weigh all your options by creating 'what if' scenarios for those tough decisions. Get at all your business data with built-in database support.";
FontSize = 14;
Bitmap = "calc_o.bmp";
FadeType = "FadeEffect_VERTICAL_LINES";
TextWidth = 350;
TextHeight = 250;
BitmapPosX = 80;
BitmapPosY = 100;
End
Slide gid_Slide_4_Open
Order = 4;
Text = "%PRODUCTNAME Impress - Effective presentations made easy.\nAchieve the results you want with high-impact presentations that help you make your point. Get a jump-start on the content, look and even multimedia effects, using the AutoPilot. Powerful and easy-to-use drawing and diagramming tools are built right in.";
FontSize = 14;
Bitmap = "impress_o.bmp";
FadeType = "FadeEffect_VERTICAL_LINES";
TextWidth = 350;
TextHeight = 250;
BitmapPosX = 80;
BitmapPosY = 100;
End
Slide gid_Slide_5_Open
Order = 5;
Text = "%PRODUCTNAME Draw - Don't just draw, dazzle!\nUse drawings to bring your documents, spreadsheets and presentations to life! Create compelling 3D diagrams or use textures to liven up your data charts. One click drawing tools make it easy to create visual images to illustrate your point.";
FontSize = 14;
Bitmap = "draw_o.bmp";
FadeType = "FadeEffect_VERTICAL_LINES";
TextWidth = 350;
TextHeight = 250;
BitmapPosX = 80;
BitmapPosY = 100;
End
Slide gid_Slide_6_Open
Order = 6;
Text = "Thank you for choosing %PRODUCTNAME %PRODUCTVERSION!\nWe hope your everyday work is easier, faster and a lot more fun. Thank you for choosing %PRODUCTNAME %PRODUCTVERSION!";
Description = "This is where you decide which %PRODUCTNAME modules are to be installed.";
End
Module gid_Module_Prg_Wrt
ParentID = gid_Module_Prg;
Name = "%PRODUCTNAME Writer";
Description = "The word processing functions of %PRODUCTNAME provide you with powerful tools for creating your own documents. This program cannot be deselected when installing";
End
File gid_File_Exe_Swriter
Name = "ooowriter.exe";
PackedName = "f_0289";
Size = 36864;
Dir = gid_Dir_Program;
Carrier = gid_DataCarrier;
UnixRights = 755;
Date = "29042002";
Time = "0600";
Styles = (PACKED);
End
File gid_File_Exe_Sglobal
Name = "oooglobal.exe";
PackedName = "f_0290";
Size = 36864;
Dir = gid_Dir_Program;
Carrier = gid_DataCarrier;
UnixRights = 755;
Date = "29042002";
Time = "0600";
Styles = (PACKED);
End
File gid_File_Exe_Sweb
Name = "oooweb.exe";
PackedName = "f_0291";
Size = 36864;
Dir = gid_Dir_Program;
Carrier = gid_DataCarrier;
UnixRights = 755;
Date = "29042002";
Time = "0600";
Styles = (PACKED);
End
Module gid_Module_Prg_Wrt_Bin
ParentID = gid_Module_Prg_Wrt;
Name = "Program Module";
Description = "The application %PRODUCTNAME Writer";
Description = "Whether for business reports or new product presentations, the %PRODUCTNAME Impress templates help you quickly achieve professional results.";
Default = YES;
Styles = (HIDDEN_ROOT);
End
Module gid_Module_Prg_Impress_Sample
ParentID = gid_Module_Prg_Impress;
Name = "%PRODUCTNAME Impress Samples";
Description = "%PRODUCTNAME Impress Samples";
Default = YES;
Styles = (HIDDEN_ROOT);
End
Module gid_Module_Prg_Draw
ParentID = gid_Module_Prg;
Name = "%PRODUCTNAME Draw";
Description = "Use the vector-oriented %PRODUCTNAME Draw to create illustrations, logos and posters.";
End
File gid_File_Exe_Sdraw
Name = "ooodraw.exe";
PackedName = "f_0307";
Size = 36864;
Dir = gid_Dir_Program;
Carrier = gid_DataCarrier;
UnixRights = 755;
Date = "29042002";
Time = "0600";
Styles = (PACKED);
End
Module gid_Module_Prg_Draw_Bin
ParentID = gid_Module_Prg_Draw;
Name = "Program Module";
Description = "The %PRODUCTNAME Draw Application";