1000 Welcome to the Corel Manual Double-Sided Printing Wizard.
1001 Click "Next", to begin.
2000 Do you want to enable or disable manual double-sided printing?
2010 Enable
2011 Disable
3000 Select the printer for which you want to enable manual duplex printing :
3005 This printer is already set up. Reconfigure?
3006 This printer is not yet configured for manual duplexing.
4000 Manual double-sided printing will be disabled for this printer :
4001 Click "Finish"
5000 When you click "Next", a test page will be printed on the printer you have selected.
5001 Leave it on the output tray and follow the instructions on the screen.
5005 Reinsert the test page into your printer FACE UP, the arrow pointing in the direction of the paper feed. Use the smaller arrow if your printer feeds paper along the edge.
6000 Look at your printout. Is the printed side face up?
6010 No, it is face down.
6011 Yes, it is face up.
7000 Reinsert the test page with the printed side face up, and the arrow pointing in the direction that the paper will feed into the printer.
7001 Click "Next", to continue.
8000 Remove the test page from the printer. Does it have printing on both sides?
8010 Yes, it has printing on both sides.
8011 No, it has printing on one side only.
9000 What number is in the square box in the corner of the test page? ( See image A )
9001 What number is on the reverse side of the test page, in the same corner as the square box? ( See image B )\n\nIf you're unsure, fold the corner of the test page that has the square box. Turn the test page over. What number is in the folded corner?
9005 The number
10000 The wizard now has all the information it needs to help you print your double-sided projects correctly.
10001 Click "Finish", to continue.
11000 Select the printer for which you want to disable manual duplex printing :
65000 No printer is available or installed on this system.
65002 The printer name is invalid.\n\nWizard execution aborted.
