403 Click to zoom in, right-click or SHIFT+click to zoom out
404 Pos:%s
405 Use ALT to copy selection
406 Use CTRL and/or SHIFT to constrain
408 Use CTRL and/or SHIFT to constrain
409 CTRL+Click: Paper color, right-click: Fill color
410 Pos:%s %s
411 Use CTRL and/or SHIFT to constrain
412 Use CTRL to constrain
417 Angle: %d
418 Positions the object(s)
419 Scales the object(s)
420 Rotates the object(s)
421 Skews the object(s)
422 Distorts the object(s)
423 Adds perspective to the object(s)
429 RGB: %3d,%3d,%3d
430 HSB: %3d,%3d,%3d
431 CMYK255: %3d,%3d,%3d,%3d
432 CMY: %3d,%3d,%3d
433 Gray: %3d (%d %%)
434 BW: %3d
435 HLS: %3d,%3d,%3d
436 YIQ: %3d,%3d,%3d
437 Lab: %3.1f,%3.1f,%3.1f
438 Updating work image...please wait
443 Draws paths in FreeHand Mode
444 Pos:%s Start:%s Delta:%s Scale:%s
446 Making a copy of the partial file...
447 CMYK: %3d,%3d,%3d,%3d
448 Index: %3d RGB: %3d,%3d,%3d
449 Value:%3d Ink:%3d
450 Value:%3d Inks:%3d,%3d
451 Value:%3d Inks:%3d,%3d,%3d
452 Value:%3d Inks:%3d,%3d,%3d,%3d
453 %s,%s
454 Right click to reset the origin, SHIFT to resize
455 Use CTRL to constrain, SHIFT+ALT to keep same origin
456 Use ALT to draw a straight line, CTRL to constrain
457 Index: %3d
458 Positions the selection
459 Double-click to apply
460 Double-click to reset
461 Edit nodes
462 Draws paths in Bezier Mode
463 Click to rotate, double-click to crop
464 Click to rotate, double-click to reset
465 Drag to navigate image
466 Click to apply stroke
467 Scaling image list...please wait
468 Compacting swap file...please wait
469 Converting image list...please wait
470 Generating thumbnail...please wait
471 Loading script...please wait
472 RGB48: %5d,%5d,%5d
473 Gray16: %5d (%d %%)
474 Click to size, double-click to crop
475 Click to size, double-click to reset
476 Use CTRL to subtract, SHIFT to add, both to XOR
477 Use CTRL to subtract, SHIFT to add, both to XOR, ALT to resize
478 Use CTRL to subtract, SHIFT to add, both to XOR, ALT to resize
479 Drag to resize the nib
480 Click to create text object, click inside text to re-edit
481 Click to apply fill
482 Drag to create gradient fill
483 Drag on selected object(s) to create transparency
484 Click to remove color from selected object
485 Click to create a mask
486 Click on object to Select
487 Click object to select
488 Drag to create cropping area
489 Updating all thumbnails...
490 Use CTRL and/or SHIFT to constrain, ALT+click to finish mask
491 Use CTRL to constrain, ALT to resize
492 Use CTRL to constrain, ALT+Click to finish
493 Use CTRL to constrain, ALT+Click to finish joined lines
494 Click outside text box or press SHIFT+ENTER to set text
495 Click Apply button or press ENTER to set
496 , SHIFT to resize
497 Regenerating fill for Clone
498 Rotates the selection
499 Distorts the selection
500 Adds perspective to the selection
501 Sizes the object(s)
502 Skews the selection
503 Scales the selection
504 Sizes the selection
511 Effects
512 Scripts
513 Directory %s was not found.\nDefaulting to the Desktop.
514 Desktop
515 .\Scripts
516 .\Scripts
517 Select Test Image
518 New Script
519 Created in CorelPhotoPaint
520 Corel SCRIPT Editor
601 Butt
602 Filled
603 Round
604 Point
652 Last Used
653 You cannot delete the Last Used preset.
654 You cannot save over the Last Used preset.
655 Are you sure you want to delete %s?
656 Preset %s already exists. Overwrite it?
657 Default
658 Preset
700 1-Bit Black and White
701 8-Bit Grayscale
702 8-Bit Paletted
703 24-Bit RGB
704 24-Bit Lab
705 32-Bit CMYK
706 16-Bit Grayscale
707 48-Bit RGB
708 64-Bit CMYK
709 Multichannel
1050 Color Mask (*.cmk)
1058 AVI Animation
1060 Quick Time Animation
1200 Uncompressed
1260 Script Manager
1261 Image Info Rollup
1262 Symmetry Rollup
1263 Pen Settings Rollup
1265 Tool Settings Rollup
1300 File %s exists. Overwrite it?
1301 Corel PHOTO-PAINT
1302 Corel PHOTO-PAINT - Warning
1303 Corel PHOTO-PAINT - Error
1304 This tool requires that at least one object be selected.
1305 This tool requires that at least one object or the background image be editable.
1306 New file will be a partial file
1307 Mask will be defloated. Continue?
1308 File %s is read-only. Save is disabled.
1309 Selection is empty!
1310 File %s is too large. Loading as partial file.
1311 Image Calculations is not recordable and will not\nbe added to the Undo list of %s.\nDo you wish to Continue?
1312 This tool requires an Undo Buffer.
1313 Revert %s to last saved version?
1314 Objects will be merged with background in exported file
1315 Masks will be lost.
1316 Mask will be lost and objects merged with background.
1317 Object transformations and settings will be lost when re-editing text
1318 Brush type already exists. Overwrite it?
1319 Cannot close document while it is busy. Please cancel task first.
1320 The animation's length has changed. The audio and video will no longer be synchronous
1321 Only the current frame is used for creating the optimized palette.
1322 Masks will not be saved in this format.
1323 Alpha channels cannot be saved to this format.
1324 Some commands cannot be redone (Redo List) on their own.\nDo you wish to continue?
1325 The name is too long and will be truncated to %s.\nDo you want to continue?
1326 Objects will not be deskewed. \nDo you want to continue?
1327 Text objects in an image can have up to 1000 characters only\nExtra characters are truncated
1328 This filter needs to access data outside the floater, mask will be defloated!
1329 Only the current frame will be split into separate channels.
1330 The name is too long.
1331 File is not RGB, no calibration performed.
1332 Calculations will be performed only on the currently loaded partial area.
1333 Cannot create the partial file. The full image is now in memory.
1334 Playing more then one movie may slow system response time.
1335 The image size is too big to handle, try a smaller image size
1336 Objects cannot be loaded with the partial file.\nTry loading the file normally.
1337 Masks cannot be loaded with the partial file.\nTry loading the file normally.
1338 Objects and Masks cannot be loaded with the partial file.\nTry loading the file normally.
1339 The number of colors in the Custom Color Palette has reached its maximum. Adding the new color will cause the last color to be overwritten.\nWould you like to add this color?
1340 Adding all colors will cause the maximum number of colors in the Custom Color Palette to be exceeded by %d colors. Delete some colors from the Custom Palette, or create a new palette before adding these colors.
1341 Commands requiring a document will be skipped.
1342 This effect requires an unlocked background.
1343 This 16-bit filter cannot be executed.
1344 Do you want to delete the associated path file as well?
1345 Unsaved changes will be lost. Do you want to save them?
1346 Some objects are empty and will be deleted. Do you wish to continue?
1347 There's no valid area to apply this effect.
1348 Delete '%s' from palette?
1349 This filter requested invalid data
1350 File Name field must be set!
1351 Map Name field must be set!
1352 Save to Checkpoint?
1353 Save to File?
1354 Do you wish to turn the Auto Save feature off?
1355 Path Name Not Unique !
1356 This effect cannot be run on a paletted image with a mask,\nbecause palette changes must affect the entire image.
1357 This effect cannot be run on a paletted image if there\nis more than one object, because palette changes\nmust affect the entire image.
1358 The empty object cannot be edited while transparency is locked.
1359 Image must be converted to Internet compatible color mode.
1360 Settings with this name already exist. Overwrite them?
1361 The current settings have not been applied.\nDo you wish to apply them?
1362 Resetting to the original settings will delete any custom settings you have defined.\nDo you wish to continue?
1363 Objects that are off the paper will get clipped to the paper size if activated.\nDo you wish to continue?
1365 The selected object is empty.
1366 Swap file space is very low.\nTo avoid problems, try choosing other drives from the Options dialog box\nor try deleting files on the existing drives.
1368 The following profile is selected in the Color Manager to handle CMYK conversions: %s.
1369 No profile has been selected in the Color Manager to handle CMYK conversions.
1370 The requested filter is not currently loaded
1371 This image contains a digital watermark.\nFor more information about the creator of this image, use the Read Watermark command in the Effects menu.
1372 Can't find watermark on this image.
1373 This filter requires a mask
1374 This filter changes pixels outside the selection.\n It may be partially applied with inactive background
1375 This filter cannot handle the current image mode
1376 This image contains lens(es) which are not translatable to the selected color mode.\nAll objects and lenses will be combined with the background.\nDo you wish to continue?
1377 Paste-in-selection will be defloated. Continue?
1378 PSD images containing Adjustment Layers may not appear correctly when imported into Corel PHOTO-PAINT. Verify Lens Properties.
1379 Mask contains no actual data. Can't copy this image to file this image until the current mask is removed.
1380 This image contains lens(es) which cannot be saved to the selected format. Object(s) will be created replacing the lens with visible data
1381 To make the Undo command available for all objects included in the Repeat operation, the number of Undo levels must be increased to %d.
1382 \nActive lenses are not editable by this tool in Multi-mode or Single-mode.
1383 Merging all the objects with the background may give a more accurate conversion.\nDo you wish to flatten the image?
1384 Not enough memory to make enough Undo levels available for\nall objects included in the Repeat operation.\nDo you wish to checkpoint the image before continuing?
1385 Original file %s not found.\nDo you want to look for this file now?
1386 &Increase undo levels to %d.
1387 Multiple channels contain the same color. If you continue,\nthese channels will be merged into a single plate.\nDo you wish to continue?
1388 Low Res Information cannot be saved with this format.
1389 Sorry, that file is not a valid archive.
1390 Document must be saved before archiving %1. Do you want to save the document?
1391 Do you want to replace %1 with this version?
1392 This version will be saved as %1.
1393 This image was created with an older version of Corel PHOTO-PAINT. Do you wish to update its RGB color characteristics?
1394 Delete preset: %s?
1395 To preserve the timing, frames will be duplicated.\nThis may result in a unexpectedly large file. Enabling compression will reduce file size.\n Do you wish to continue?
1396 A lens, mask, or alpha channel is selected. This tool requires a selected object.
1397 This lens has a dynamic behavior. The pattern will change upon update of the screen.
1398 Document has changed. Do you want to save changes before archiving %1?
1399 Could not open all selected files. Can only open up to 100 files at a time.
1400 This file has a frame rate of less than 1 fps.\n It will be rounded to 1 fps when saving.
1401 Low Res information is not compatible between Macintosh and PC platforms.
1402 Corel PHOTO-PAINT has detected a change in the system color palette.\nTo ensure the best display, please shut down and re-start Corel PHOTO-PAINT.
1403 Objects with Dropshadow properties and Lenses may not be saved in this format.
2001 Not enough memory
2002 File %s not found.
2003 Cannot create file %s.
2004 Cannot delete the custom brush type.
2005 Document not available for printing.\nOperation has been aborted.
2006 Insufficient memory or scratch disk space to acquire image. Try increasing memory or using a different volume as a scratch disk.
2007 Insufficient memory or scratch disk space to transpose image. Try increasing memory or using a different volume as a scratch disk.
2008 Document is not a partial file
2009 Can't copy the default nib files into your current workspace.
2012 Not enough disk space for partial file
2013 Cannot animate marquee - system timer not available
2014 Plug-in is not loaded!
2015 Could not convert image
2017 Invalid image type
2018 memory file
2019 This file needs to be saved with CMX data to open.
2020 Camera Send Image Failed
2021 The selected camera does not support this feature.
2023 Cannot load %s. Try opening the file using a specific filter.
2024 A problem occurred when writing the file. The disk may be full.
2025 A problem occurred when opening the file.
2026 You must use the control panel to install support for audio and video compression.
2027 Partial file size is too small.
2028 Not enough memory to create work image.
2029 Cannot load this file partially. Try opening the file normally.
2031 A problem occurred when reading the file.
2032 OLE Initialization failed. Make sure that the OLE libraries are the correct version.
2033 Cannot save to this format. Try saving as a different file type.
2035 Not enough memory for partial area. Select a smaller area to edit.
2038 Not enough disk space for the partial file.
2039 Not enough memory to load image
2041 Not enough memory to create window
2044 Not enough temporary disk space to create new movie.
2045 Cannot group temporary channel objects with permanent objects.
2046 Cannot combine temporary channel objects with permanent objects.
2047 A problem occurred when accessing the nib file. The file may be corrupted or non-existent.
2049 The file name you chose is not allowed.\nUse another file name.
2050 The brush settings file is read only.\nYou won't be able to change the settings\nfor the paint brush, effect and clone tool.
2051 Object is empty!
2052 A problem occurred while resetting the nib file. Some files might be missing or corrupted
2053 A problem occurred while appending. The file may be corrupted or invalid.
2054 A problem occurred while loading the nib file. The file may be corrupted or invalid.
2055 A problem occurred while deleting the nib. The file may be corrupted.
2056 %d Image(s) failed to load. Some formats are not\nsupported for batch processing.\n
2057 The document needs to be saved prior to using\nthe clone from saved tool.
2058 Cannot use clone from saved because an error occurred\nwhile loading the saved version.
2059 Cannot use clone from saved because the size\nof the saved version is different.
2060 Error in undoing the paste command
2061 Error in re-doing the paste command
2062 Cannot create more than 20 Alpha Channels
2063 Cannot use clone from saved because the current\nclip is beyond the end of the file.
2065 Could not load the Script Editor.\nPlease ensure it is properly installed.
2066 Cannot load a partial movie file. Movie will be loaded normally.
2067 Cannot play a movie with more then one view.\nPlease close extra views and try again.
2068 The file name : %s \n is either invalid or too long\nChoose a proper file name
2069 Selected image larger than the base image
2070 Could not create backup file. Try saving file to a different name.
2071 Your brush type file is full. You have to delete \nsome types before adding new ones.
2072 There is not enough space to add more nibs. You have to delete \nsome nibs before adding new ones.
2073 Cannot use clone from saved while editing an embedded image.
2074 Could not defringe because there are not any non-fringe pixels in the object.
2075 Error in undoing the object duplicate command
2076 This image does not support some lens types.\nOperation has been aborted.
2077 This feature does not support lenses. \nOperation has been aborted.
2078 No stroke loaded. Use the brush tool to create a stroke.
2079 No image list loaded. Create one using objects or load an existing CPT file.
2080 Not enough memory to color convert or scale the image list
2081 There is not enough memory to use the transparency brush. Try again with fewer objects selected.
2082 A backup file could not be created. Do you wish to continue?
2083 Your Pen Settings file is full. You have to delete\nsome pen settings before adding new ones.
2084 Your pen settings cannot be saved. Make sure that\nthe pen.ini file is not read only.
2085 The Settings name 'Custom' cannot be used.
2086 Running low on memory! Please exit some applications and try again.
12288 Printer paper orientation does not match one or more document pages.\n\nAdjust printer automatically?
12289 %s is currently printing your document to a .PRN file.
12290 Your document's page size is too large for the current physical page size. The document page size selected in page setup must be small enough to fit within the physical page selected in printer properties, while still leaving a %s %s margin on all sides.\n\nClick Cancel if you wish to return to your document to adjust its page size, or click Back to change the page size in printer properties.
12291 The largest printer page size supported by the service bureau is %s.\n\nIn Printer Properties, choose a printer page size that is within this range.
12400 Default
12401 No printers have been installed.
12402 Composite
12403 Disabled
12404 Even & Odd
12405 Even Pages
12406 Odd Pages
12407 No printers are installed. Would you like to add one?
12408 Left & Right
12409 Left Pages
12410 Right Pages
12411 &Maximum:
12412 Wi&dth:
12413 Cyan
12414 Magenta
12415 Yellow
12416 Black
12417 Color
12418 Frequency
12419 Angle
12420 Overprint
12421 Standard Defaults
12422 No PostScript screen sets found in CORELPRN.INI!
12423 Unable to locate the file %s in the data directory \nor the custom directory!\n
12433 Text File (*.txt)|*.txt|All Files (*.*)|*.*||
12434 Print Job Info Sheet
12435 Print Job Info File (*.pji)|*.pji|All Files (*.*)|*.*||
12436 High
12437 Medium
12438 Low
12439 Draft
12440 %ld dpi
12441 %ld dpi x %ld dpi
12442 (%s)
12443 %3.3f Points
12444 You are about to delete the style: %s\n\nDo you wish to proceed?
12445 Error loading %s.
12446 As in document (%s)
12447 Custom
12448 Full Page
12449 Book
12450 Booklet
12451 Tent-Card
12452 Side-Fold Card
12453 Top-Fold Card
12454 Tri-Fold Card
12455 Double Sided Full Page
12456 Ready
12457 Paused
12458 Error
12459 Pending Deletion
12460 Paper Jam
12461 Paper Out
12462 Manual Feed
12463 Paper Problem
12464 Offline
12465 I/O Active
12466 Busy
12467 Printing
12468 Output Bin Full
12469 Not Available
12470 Waiting
12471 Processing
12472 Initializing
12473 Warming Up
12474 Toner Low
12475 No Toner
12476 Page Punt
12477 User Intervention Required
12478 Out Of Memory
12479 Door Open
12480 Server Unknown
12481 ;
12482 Default printer
12483 %d documents waiting
12484 1 document waiting
12485 Don't group
12486 Refeed this stack with this sheet
12487 in the direction of the arrow.
12488 Use the smaller arrow if your printer feeds the paper along the long edge.
12489 The current settings for this document will cause %d fonts to be\ndownloaded to the printer. This could overrun memory and prevent\nthe page(s) from printing.\n\nAre you sure you want to continue?
12490 FACE UP
12491 FACE DOWN
12492 The first side of your print job is being printed.\n\nWhen the printer is finished, follow the instructions on top of the stack of printed sheets.\n\nOnce you have done this, click Continue to print the second side.
12493 The first side of your print job is being printed.\n\nWhen the printer is finished, refeed the stack for printing on the second side. The stack should be fed %s, with the %s edge that came out of the printer facing into the paper feed.\n\nOnce you have done this, click Continue to print the second side.
12494 face up
12495 face down
12496 first
12497 last
12498 C&urrent slide
12499 C&urrent thumbnail
12500 C&urrent frame
12501 C&urrent handout
12502 Sl&ide&s:
12503 Thumbna&ils:
12504 Fr&ames:
12505 H&andouts:
12506 Style name cannot be empty.
12507 0░
12508 180░
12509 Unable to access printer driver.Try removing and reinstalling this printer driver.
12510 The style:\n\n %s\n\nalready exists. Do you wish to update it with new settings?
12511 This is the name of a built-in style that cannot be changed.
12512 Manual Double-Sided Printing
12513 Page %d
12514 Slide %d
12515 Thumbnail %d
12516 Frame %d
12517 Handout %d
12518 %3.4f x %3.4f %s
12519 %3.4f %s
12520 &Close
12521 &Options...
12522 %d%%
12523 To Page
12524 To Width
12525 To Height
12526 To Selected
12527 To Fit
12528 AaBbCcDdEeXxYyZz
12529 (Print Preview)
12530 Signature %d
12531 Front
12532 Back
12533 -
12534 Seps
12535 Composite
12536 CMYK
12537 Hexachrome
12538 &&
12539 Spot
12540 Printer:
12541 Composite
12542 (%s)
12543 Signature
12544 Side
12545 Plate
12546 Page(s)
12547 %d of %d
12548 ,
12549 Nothing is selected to be printed
12550 No plates matching the View|Plate setting are selected for printing.
12551 Width: %s Height: %s Position: (%s, %s)
12552 None
12553 ,
12554 %s Densitometer Scale
12555 No
12556 Preview of duotone separations is not supported
12557 Zoom In
12558 Zoom Out
12559 Print Previe&w
12560 Standard
12561 Toolbox
12562 Zoom...
12563 Property Bar
12564 Not configured
12565 Not configured for composite
12566 Not configured for separations
12567 Print
12568 Print Options
12569 Level 1
12570 Level 2
12571 PostScript 3
12572 Prepress...
12573 N-up Format
12574 Layout Template
12575 Layout Template (Front)
12576 Layout Template (Back)
12577 Nothing is selected to be printed. Check your page range and/or color separation settings.
12578 You have requested that the name of the current signature layout be included in this print style. However, the current signature layout has not been saved.\n\nDo you wish to save the current signature layout?\n\n
12579 Choose Yes to save this signature layout now, No to continue saving this print style without the name of a signature layout, or Cancel if you do not wish to save this print style at this time.
12580 You have requested that the name of the current n-up format be included in this print style. However, the current n-up format has not been saved.\n\nDo you wish to save the current n-up format?\n\n
12581 Choose Yes to save this n-up format now, No to continue saving this print style without the name of a n-up format, or Cancel if you do not wish to save this print style at this time.
12582 Generic Profile
12583 Could not find DCS file %s, do you want to continue printing?
12584 As in document
12585 Fit to page
12586 Center of page
12587 Top center
12588 Left center
12589 Right center
12590 Bottom center
12591 Top left corner
12592 Top right corner
12593 Bottom left corner
12594 Bottom right corner
12595 Custom
12596 -
12597 Not installed
12598 Not used for grayscale output
12599 Option
12600 Setting
12601 No printers installed
12602 Do not override
12603 (Portrait)
12604 (Landscape)
12605 Tiled pages: off
12606 Tiled pages: 1
12607 Tiled pages: %d
12608 x 1
12609 x %d
12610 Selection:
12611 Page range:
12612 (%s, %s)
12613 Maximum zoom level achieved.
12614 Zoom
12615 Pick Tool
12616 Signature Layout
12617 N-up Format
12618 Marks Placement
12619 Zoom Tool
12620 x:
12621 y:
12622 %
12623 Profiles
12624 Print
12625 You cannot print more than one document simultaneously. You must either wait for the current print job to finish or cancel it.
12626 &Help
12627 Microsoft Fax Driver
12628 PUB:
12629 There are no colors available for separation. Color separations have been turned off.
12630 Blank Page Insertion
12631 When printing, do you want %s to use your left/right page settings, inserting blank pages where necessary?
12632 Blank Page
12633 Press ESC to Cancel.
12634 corelap.hlp
12635 The name may not exceed 50 characters in length.
12636 Imposition Layout
12637 Imposition Layout - Page
12638 Imposition Layout - Gutter
12639 Imposition Layout - Margins
12640 CMYK
12641 RGB
12642 Grayscale
12643 This layout is stored in a .cly file created by an incompatible Corel application.
12668 %s\nCould not locate or successfully parse the selected PPD file.\nDo you wish to select another one?
12669 %s\nCould not successfully parse the selected PPD file.
12670 ,
12671 The printer is currently unavailable.\n\nThe printer and/or server may be offline. If this is not the case, it may be necessary to reinstall the printer.
12915 {\rtf1\ansi\deff0\deftab180{\fonttbl{\f0\fswiss Arial}}{\colortbl\red0\green0\blue0;\red128\green0\blue0;}\pard\fs16 This page will list potential problems or issues that you should be aware of regarding your print job.\par\par There are no known issues with the current
12916 document or print settings. Check again just before you print this document and future print jobs.\par\par\b\cf1 Tip:\plain\fs16 You can view or change which issues are checked for by clicking on Preflight Settings, below.}
12920 Plates with same screen angle
12921 Image or marks not fitting in media's printable area
12922 Blank page(s) in document
12923 White objects set to overprint
12924 One or more white objects are set to overprint
12925 There are one or more objects with a 100% white fill or outline, for which that fill or outline has been set to overprint.\n\n
12926 You can use the Find and Replace Wizard to locate white objects. Alternatively, you can turn off all overprints set for specific objects by turning off the "Preserve document overprint settings" option under the Separations tab.
12927 Banded fountain fills
12928 One or more fountain fills may show banding
12929 The following actions can eliminate banding:\n\n
12930 Reduce the length of the fountain fill\n
12931 Missing DCS files
12932 One or more DCS files are missing
12933 The following DCS files are missing:\n\n
12935 Documents using TrueType fonts
12936 This document uses %d TrueType font(s)
12937 This document contains the following TrueType fonts. If you are sending this file to a service bureau, they may prefer that you use Type 1 fonts.\n\n
12939 Images rotated to an angle other than 0░, 90░, 180░ or 270░
12940 There are one or more rotated images
12941 One or more images in this document have been rotated to an angle other than 0░, 90░, 180░ or 270░.\n\n
12942 For scanned images, it is preferable to rotate the source material on the scanner, rather than by software. Rotating images in software may reduce quality and/or result in slower printing.
12943 Layout scaled down to fit media
12944 Pages have been scaled down for the layout
12945 In order to fit the number of document pages specified in the current imposition layout onto the current media size, the document pages have been scaled down.\n\n
12946 If you do not want the document pages to be scaled down, you can select a larger media size in Printer Properties. Alternatively, you can turn on the "Maintain Document Page Size" option by selecting the Imposition Layout Tool in Print Preview.
12947 Registration color is used
12948 One or more objects use the registration color
12949 Objects that are colored with the registration color will print on all plates. The registration color is intended for use when drawing your own printer's marks, and generally should not be used for any other type of object.\n\n
12950 If you want to change these objects to use CMYK black instead, you can locate them using the Find and Replace Wizard.
12951 Convert spot not applied to placed EPS files
12952 Convert spot to CMYK doesn't apply to placed EPS files
12953 You have selected the Convert Spot to CMYK option, indicating that you do not want any spot color plates to be printed. However, the document contains one or more placed EPS files.
12954 If any of these EPS files contain spot colors, you should either turn off the Convert Spot to CMYK option, or recreate these EPS files without using spot colors.
12955 You should be aware that because the contents of EPS files are never altered, any spot colors in these EPS files will not be printed.\n\n
12959 Many fonts to be downloaded to a PostScript printer
12960 There are many fonts to be downloaded to the printer
12961 The current document and print settings will cause %d fonts to be downloaded to the printer. This could overrun memory and prevent the page(s) from printing.\n\n
12962 You can do one or both of the following to reduce the number of fonts that will be downloaded:
12963 Text with texture fills (PS Level 1 only)
12964 One or more text objects contain texture fills
12965 Text objects that contain texture fills may cause limitcheck errors on Level 1 PostScript devices. This is because multiple subpaths are usually necessary in order to render text objects.
12967 Bitmaps in complex clipping paths (PS Level 1 only)
12968 There are complex lenses or powerclips containing bitmaps
12969 There is a clipping path (e.g., a Lens or PowerClip), with multiple subpaths, that contains a bitmap.\n\nBitmaps inside complex clipping paths may cause limitcheck errors on Level 1 PostScript devices.\n\n
12970 These objects should be redesigned so that only one curve, with no subpaths, exists.
12971 Texture fills in complex objects (PS Level 1 only)
12972 There are objects with multiple subpaths containing texture fills
12973 Objects comprised of multiple subpaths that contain texture fills may cause limitcheck errors on Level 1 PostScript devices.\n\n
12974 These objects should be redesigned so that only one curve, with no subpaths, exists.
12975 Complex clipping regions (PS Level 1 only)
12976 There is a lens or powerclip object that contains many nodes
12977 There is a clipping path (e.g., a Lens or PowerClip) that contains many nodes. Complex clipping paths may cause limitcheck errors on level 1 PostScript devices.\n\n
12978 It would be best to redesign such clipping paths so that they use as few nodes and subpaths as possible.
12979 Objects with outline having many nodes (PS Level 1 only)
12980 There are objects with very complex outlines
12981 Outlines with more than 500 nodes may cause limitcheck errors on Level 1 PostScript devices.\n\n
12982 It would be best to redesign such objects so that fewer nodes are necessary.
12983 Objects with outline and fill having many nodes (PS Level 1 only)
12984 There are objects with both complex fills and complex outlines
12985 Objects with more than 300 nodes that contain complex fills may cause limitcheck errors on Level 1 PostScript devices.\n\n
12986 It would be best to redesign such objects so that they use as few nodes and sub paths as possible.
12989 Output doesn't fit on media
12990 The contents of the following page(s) do not fit within the media selected in printer properties. If you continue, objects may be cropped at the edge of the media.\n\n
12991 To resolve the situation, design your document to a smaller size, choose a larger media size in Properties under the General tab, or select the Fit To Page option under the Layout tab.
12992 Printer's marks don't fit within printable area
12993 The selected printer's marks do not fit within the printable area of this device. If you continue, these marks may be partially or entirely cropped near the edge of the media.\n\n
12994 To resolve the situation use a smaller page size in your document's Page Setup, choose a larger media size in Properties (under General tab), or manually place your marks in Print Preview using the Marks Placement Tool.
12995 Output doesn't fit within printable area
12996 The contents of the following page(s) do not fit within the printable area of this device. If you continue, objects may be cropped near the edge of the media.\n\n
12997 You can use Print Preview to view exactly what will be printed.\n\n
12998 Similarly named inks that will print on separate plates
12999 There are similarly named inks that will print on separate plates
13000 The document uses the following inks that have similar, but not identical, names. If color separations are created for this document, each of these inks will be separated onto a different plate.
13001 A minimum of 0.5" around the document trim page size is required to completely print the printer's marks.\n\n
13002 This situation may arise when you have inadvertently used the version of an ink intended for use with uncoated paper (CVU), and the version intended for coated paper (CVC) in the same document.
13003 In this case, you can locate all objects using one of the inks, and change them to use the other ink.\n\nThis situation may also arise if you have imported a file from another application, where slightly different names have been used for
13004 If this is not what you intend, you should change the document to only use one of the similiarly named inks.\n\n
13005 ,
13006 the same ink. In this case, you can change all non-imported objects to use an ink of the same name that is used in the imported objects. To do this, you may need to add a new ink of that name to the User Inks palette.
13007 If you do not want these objects to be cropped, you may choose a larger media size in Properties under the General tab, select the Fit To Page option under the Layout tab
13008 , use a device that has a smaller non-printable area, or design your document so that it doesn't extend so close to the edge of the page.
13012 Several spot plates will be printed
13013 Printing this document with the current print settings will cause %d spot plates to be printed. This could prove to be very costly.\n\n
13014 If you don't want to print these colors as separate spot plates, you can do one of the following:\n1. Select "Convert spot colors to CMYK" under the Separations tab.\n2. Instead of using spot colors in your document, use the equivalent CMYK colors.
13015 Two or more color separations will print at the same screen angle
13016 The current print settings will cause the following color separations to be printed at the same angle. This could result in MoirΘ patterns or other undesirable effects.\n\n
13017 Screening angles can be changed under the Separations tab after turning on "Use advanced settings." If you are unsure of what screen angles to use, contact your service bureau or printer.\n
13018 %s (%f░)\n
13019 ,
13020 Printer's marks don't fit on media
13021 The selected printer's marks do not fit on the media selected in printer properties. If you continue, these marks may be partially or entirely cropped at the edge of the media.\n\n
13022 To resolve the situation use a smaller page size in your document's Page Setup, choose a larger media size in Properties (under General tab), or manually place your marks in Print Preview using the Marks Placement Tool.
13025 There are blank pages in the document
13026 The following page(s) of the document are entirely blank, but are selected to be printed. You may wish to double check that this is intentional.\n\n
13029 Many spot plates
13030 Increase the number of fountain steps\n
13031 Increase the range of color in the fill\n
13032 Output to a higher resolution\n
13033 Output using a lower screen frequency\n
13034 Break apart the fill into two or more objects\n
13035 Color correction has been enabled for non-PostScript output
13036 Color correction enabled for non-PostScript output
13037 Color output to this device will be calibrated using the currently selected RGB composite color profile. If the driver for this device is also set to do color correction, it may happen twice.\n\n
13038 If you wish to use the printer driver color correction, turn off the "Use color profile" option under the Misc tab.\n
13039 If you wish to use Corel's color correction, turn off color correction in the printer driver by choosing "Properties" under the General tab.\n
13040 Device independent PostScript with PostScript Level 2 or PostScript 3
13041 Level 2 PostScript has been selected for device independent PostScript
13042 Level 2 and higher PostScript files are suitable for composite workflows only. If your PostScript file is going to be separated in another application you must use Level 1 PostScript.
13043 PostScript 3 has been selected for device independent PostScript
13100 Print Job Information:
13101 Application Information
13102 Filename:
13103 Application:
13104 Version:
13105 Name:
13106 Driver / Device Information
13107 Driver Name:
13108 Driver File:
13109 Resolution:
13110 Job Information
13111 Mode:
13112 Invert:
13113 Mirror:
13114 AutoFlatness:
13115 AutoSpreading:
13116 Fountain Steps:
13117 For Macintosh:
13118 Color Profile:
13119 Screen Frequency:
13120 Bleed Limit:
13121 Crop Marks:
13122 Registration Marks:
13123 File Information:
13124 Densitometer Scale:
13125 Calibration Bar:
13126 Copies:
13127 Separation Information
13128 %s:
13129 No information entered
13131 Flatness:
13132 Maximum Spread:
13133 Text Above:
13134 Font(s)
13135 Font(s) Required
13136 Font(s) Supplied
13137 OPI Linked Images
13138 None
13139 Yes
13140 No
13141 On
13142 Off
13143 Separations
13144 No
13145 Yes
13146 No
13147 Yes
13148 See Separation Information
13149 degrees
13150 lpi
13151 UNKNOWN
13152 Landscape
13153 Portrait
13154 N/A
13155 Do not know where to output the sheet.\n Go into Info Settings and specify a destination\n
13156 Printer Default
13157 PostScript Level:
13158 Bitmap Color Space:
13159 Auto Increase Fountain Steps:
13160 Optimize Fountain fills:
13161 RGB
13162 CMYK
13163 Page Numbers:
13164 Client Information
13165 Client Name:
13166 Company Name:
13167 Mailing Address:
13168 Phone Number:
13169 Fax Number:
13170 Email Address:
13171 Job Name:
13172 Job Comments:
13173
13174 Print to File:
13175 Fixed Spread:
13176 Grayscale
13177 Page Size:
13178 Slide Size:
13179 Thumbnail Size:
13180 Frame Size:
13181 Handout Size:
13182 Page Orientation:
13183 Slide Orientation:
13184 Thumbnail Orientation:
13185 Frame Orientation:
13186 Handout Orientation:
13187 at
13188 :
13189 (Continued)
13190 Imposition Layout:
13191 Preserve Document Overprints:
13192 Rasterize Entire Page:
13193 On - Single File
13194 On - Chapters to Separate Files
13195 On - Pages to Separate Files
13196 On - Plates to Separate Files
13197 PPD Device Name:
13198 Using PPD file
13199 Device independent PostScript file
13200 Using operating system's printer driver
13201 Output Method:
13202 Color Bitmap Downsampling:
13203 Grayscale Bitmap Downsampling:
13204 Monochrome Bitmap Downsampling:
13320 Preview Image Default:
13321 Off At Startup
13322 On At Startup
13323 Bitmap Font Limit (PS):
13324 Bitmap Font Size Threshold (PS):
13325 Overprint Black Threshold (PS):
13326 PostScript 2 Stroke Adjust (PS):
13327 Off
13328 On
13329 Page Orientation Prompt:
13330 Off - Always match orientation
13331 On - Ask if orientations differ
13332 Composite Crop Marks (PS):
13333 Output in Black Only
13334 Output in CMYK
13335 Bitmap Chunk Overlap Pixels:
13336 Default To Fast Mode
13337 Bitmap Output Threshold (K):
13338 Fonts Warning Threshold:
13339 Preview Color Default:
13340 Auto (Simulate Output)
13341 Color
13342 Grayscale
13343 Preview Separations Default:
13344 Auto (Simulate Output)
13345 Composite
13346 Off
13347 On
13348 NT Double Download Workaround (PS):
13349 Off
13350 On
13351 NT Bookman Download Workaround (PS):
13352 Render to Bitmap Resolution:
13353 Automatic
13354 150 dpi
13355 200 dpi
13356 250 dpi
13357 300 dpi
13358 350 dpi
13359 400 dpi
13360 450 dpi
13361 500 dpi
13362 550 dpi
13363 600 dpi
13364 Off - Don't change orientation
13365 Spot Color Separations Warning:
13366 If any spot colors are used
13367 If more than 1 spot colors used
13368 If more than 2 spot colors used
13369 If more than 3 spot colors used
13370 Send Large Bitmaps in Chunks:
13371 No
13372 Yes, if larger than threshold
13400 The print style:\n\n %s\n\nalready exists. Do you wish to update it with new settings?
13401 You are about to delete the print style: %s\n\nDo you wish to proceed?
13402 %s Defaults
13403 Custom (Current settings not saved)
13404 Job Information Sheet Settings
13405 Advanced Separations Settings
13406 Layout Settings
13407 Separations Settings
13408 Prepress Settings
13409 Miscellaneous Settings
13410 Proofing and Color Settings
13411 PostScript Settings
13412 Auto Trapping Settings
13413 Center Page
13414 Fit to Page
13415 Maintain Aspect Ratio
13416 Print Tiled Pages
13417 Imposition Layout
13418 N-up Format
13419 Tile Overlap
13420 Print Separations
13421 Print Separations in Color
13422 Convert Spot Colors to CMYK
13423 Print Empty Plates
13424 Print File Information
13425 Position File Info Within Page
13426 Print Crop Marks
13427 Exterior Crop Marks Only
13428 Print Registration Marks
13429 Color Calibration Bar
13430 Densitometer Scales
13431 Invert
13432 Mirror
13433 Print Job Information Sheet
13434 Always Overprint Black
13435 Auto Spreading
13436 Auto Spread Maximum
13437 Auto Spread Text
13438 Fountain Steps
13439 Width Scale Factor
13440 Height Scale Factor
13441 Job Info Sheet Contents
13442 Job Info Sheet Location
13443 Bleed Amount
13444 Print Vectors
13445 Print Bitmaps
13446 Print Text
13447 Print All Text in Black
13448 All Colors Black
13449 Fit Marks and Layout to Page
13450 Maximum Points per Curve
13451 Curve Flatness
13452 Auto Increase Flatness
13453 Complex Object Warnings
13454 Download Type 1 Fonts
13455 Convert True Type to Type 1
13456 PostScript Level
13457 Auto Increase Fountain Steps
13458 Optimize Fountain Fills
13459 Banded Fountain Fill Warnings
13460 Maintain OPI Links
13461 Print Page Numbers
13462 Screening
13463 Halftone Type
13464 Hexachrome Plates
13465 Apply Settings to All Pages
13466 Screen Frequency
13467 High Solid Ink Density
13468 Densitometer Densities
13469 Job Name / Slug Line
13470 Bounding Box
13471 Use JPEG Compression
13472 JPEG Quality Factor
13473 Too Many Spot Colors Warning
13474 Too Many Fonts Warning
13475 Resolve External Bitmaps
13476 Limit Bleed
13477 Fixed Auto Spreading
13478 Image Position Preset
13479 All Colors Grayscale
13480 Print Pictures & Graphics
13481 Print Hidden Pictures
13482 Use Advanced Settings
13483 Screening Settings
13484 Resolution
13485 Basic Screen
13486 Marks Alignment Rectangle
13487 Auto-Position Marks Rectangle
13488 Application Information
13489 Driver Information
13490 Font Information
13491 Links Information
13492 Job Information
13493 Separations Information
13494 Send to Text File
13495 Sent to Printer
13496 Text File Name
13497 Print File Name
13498 Print Driver Name
13499 Print Device Name
13500 Apply Default To All Pages
13501 Include Hyperlinks
13502 Include Notes
13503 Include Outlines
13504 On Start Display
13505 Output Color Bitmaps As
13506 Preserve Document Overprints
13600 Prepare For Service Bureau Wizard
13601 %s is currently gathering linked image files used by your document.
13602 %s is currently assembling information about your document.
13603 %s is currently creating a %s file.
13604 The gathering of files for your service bureau was not completed.
13605 \n\nIf you wish to change any of your previous settings or try again, click Back. Click Cancel if you wish to exit the Prepare For Service Bureau Wizard.
13606 UserName
13607 CompanyName
13608 MailingAddress
13609 PhoneNumber
13610 FaxNumber
13611 EmailAddress
13612 PrepareForServiceBureauWizard
13613 Corel Service Bureau Profiles (*.csp)
13614 Browse Service Bureau Profiles
13615 Choose Location
13616 Folder (*.*)
13617 The location you specified could not be found or created.\n\nClick back to select another location.
13618 (%s)
13619 To change color calibration to use this profile, choose 'Set Profiles' and change the %s profile. When you are finished, click Next to continue.
13620 composite
13621 separations
13622 The gathering of files for your service bureau was not completed. The following files were not created:
13623 \n
13624 \n
13625 %s x %s %s
13626 (%s)
13627 The service bureau has requested the use of color calibration.\n\nYou do not have color management installed with %s. You must exit %s to install the color management component. Please save your work before exiting.\n\nPress cancel to exit this wizard and then run Setup from %s CD #1. Choose the Custom option and select Color Management in the Graphics Utilities section.
13628 The service bureau requests that the following color profile be used as the %s printer profile:
13629 Unable to find the file:\n\n %s\n\nDo you wish to continue gathering files, omitting this file?
13630 The folder where files are being gathered to already contains a file named:\n\n %s\n\nDo you wish to replace this file?
13631 You have cancelled the gathering of files for your service bureau.
13632 Font Name
13633 Filename
13634 Fonts.TXT
13635 Below is a list of the fonts used by %s.\n\nFont Name Path\n----------------------------------------------------------------------------\n
13636 %-35.35s %s\n
13637 ,
13638 Links.TXT
13639 Below is a list of externally linked images used by %s.\n\n
13640 %s\n
13641 Your document's page size is too large for the largest physical page size supported by this service bureau. The document page size selected in page setup must be no larger than %s. \n\nClick Cancel if you wish to return to your document to adjust its page size, or click Back to select a different profile.
13642 The selected service bureau profile is not intended for use with this version of %s. Using this profile may not produce the results requested by the service bureau.\n\nDo you wish to proceed using this profile?
13643 Download profile from Internet...
13644 This service bureau profile was created for %s, and cannot be used with %s.\n\nClick Back to select a different profile, or click Cancel to exit the Prepare For Service Bureau Wizard.
13645 Any
13646 The service bureau has requested that you set the printer page size to %s.
13647 Your document page size set in page setup is %s.
13648 This is the minimum printer page size that may be used to print your document.
13649 To allow for any printer's marks outside this area, the minimum printer page size that may be used to print your document is %s.
13650 JobInfo.TXT
13651 %s is currently copying fonts used by your document.
13652 The service bureau has requested that the PostScript file conform to the DSC standard. To ensure DSC compliance, drag your PostScript file onto the Corel DSC Utility.
13653 <Your PostScript File>
13654 The Wizard could not find the file(s) corresponding to the following font(s):%s\n\nChoose Next to continue without them, or Cancel to interrupt the file copy.
13659 The Service Bureau has specified that the following color profile should be used. However, this file was not found in the same location as the .CSP file from your Service Bureau.\nClick on the Browse button to locate this file.
13660 The Service Bureau has specified that the following .PPD file should be used. However, this file was not found in the same location as the .CSP file from your Service Bureau.\nClick on the Browse button to locate this file.
13661 (None selected)
13662 Profiles
13663 Using the PPD %s, the smallest page size required to print your document is %s.
13665 The maximum page size supported by the service bureau is %s.
13666 Click cancel to go back to your document and choose a smaller page size.
13667 The PPD file %s does not support the fixed page size suggested by the service bureau (%s). Please contact your service bureau for further assistance.
13668 The PPD file %s does not support custom page sizes, and your document page is too large to fit in any of the fixed page sizes available.
13669 The maximum page size supported by this PPD is %s.
13670 In order to fit on a custom page created using the PPD file %s either the width or the height of your document page should be less than %s.
13824 Transparency in the document is complex and computation could be lengthy.\nSubstitute a faster but less accurate approach (recommended)?
13825 COMPLEX TRANSPARENCY
13826 Memory resources are getting low. It's recommended that you close any other documents or allocate more memory to the application.
13827 Low Memory
13920 No Error
13921 Unknown Error
13922 Out Of Memory
13923 Invalid Parameters
13924 Could Not Write Output
13925 Could Not Create Command Block
13926 No Output Stream Specified
13927 Could Not Read Input
13928 Invalid Block Type
13929 String Too Large
13930 No Graphics State Available
13931 No Graphics Vector Fill Available
13932 No Text Block Available
13933 No Printing State Available
13934 No Printer Vector Fill Available
13935 Invalid Parameter To Print Routine
13936 No Text Block Available
13937 Cannot Print Outside of Text Block
14074 \n\nThe file did not contain information about how to represent this ink in either of the CMYK or RGB color spaces. It has been assigned CMYK values of 100, 100, 100, 100. You may use the palette editor to assign new CMYK values for this user ink.
14075 There is an EPS or duotone file in this document that references an ink called %s. This ink was not found in any of the existing spot color palettes. It has been added to the User Defined Inks palette.
14076 Error loading %s.
14077 Cannot Open File
14078 User Defined
14079 Form Already Exists OverWrite?
14336 The
14337 the
14338 Kodak Color Management System
14341 ColorSync
14344 ICM2
14345 %s%s could not be initialized. Color management functions will be disabled.
14346 An older version of %s%s is installed on this system.
14347 Profiles.ccm
14348 Unable to load file %s.
14349 Please reinstall this application from your original disks.
14363 CMYK Offset Press, SWOP inks on coated paper
14364 Generic CMYK printer profile
14365 Generic offset separations profile
14366 -
14367 Other...
14368 Scanner
14369 Monitor
14370 Composite Printer
14371 Separate Printer
14372 Time of Generation:
14373 Total of Profiles:
14374 Profile Type
14375 Number
14376 Error %s %s file.
14377 Opening
14378 Reading
14379 Writing
14380 Not enough disk space to save file %s.
14381 Corel Color Manager
14382 unnamed color
14383 unknown INK
14384 unknown PANTONE color %d
14385 White
14386 Black
14387 The Color Manager could not create a needed color transform. Colors in your document will be uncorrected.
14388 PANTONE MATCHING SYSTEM« - Corel 8
14389 PANTONE« Hexachrome« - Coated
14390 PANTONE Process Color System«
14391 Uniform Colors
14392 FOCOLTONE Colors
14393 TRUMATCH Colors
14394 Netscape Navigator (TM)
14395 Microsoft« Internet Explorer
14396 SpectraMaster« Colors
14397 TOYO COLOR FINDER
14398 DIC Colors
14399 Lab Colors
14400 Uniform Colors
14401 SpectraMaster« Colors
14402 Image Palette
14403 User Defined Inks
14404 Custom Colors -
14405 Ink
14406 Corel Black
14407 Corel Red
14408 Corel Green
14409 Corel Blue
14410 Corel White
14411 Generic internal RGB profile
14412 sRGB
14413 The DLL's %s and %s are both required for the Colortron II,\n and at least one could not be found.
14414 Color Manager was unable to detect the selected device. \n Please check that the correct device has been selected, \n and that connections are in order.
14415 Color Manager was unable to read the measurement. Please try again.
14416 Device failed to validate password.\n Possible transmission error, please check connections and try again.
14417 The calibration was not successful. Please try again.
14418 The Colortron II is known to conflict with certain \ntablets causing them to function improperly. Do you \nstill wish to use the Colorton II?
14419 Color Manager was unable to read the measurement. \n Please take the measurement again and check that \n Your Colortron II is calibrated correctly.
14420 An unspecified device error occurred with the Colortron II
14421 Set Absolute References
14422 You should do this at least once a day, but there's little benefit from doing this more than twice a day.
14423 Absolute White
14424 Last set:
14425 Absolute white has not been set.
14426 Measure the white Calibration Target matched to your Colortron(TM) until you hear the 'measurement done' sound.
14427 Absolute Black (Zero Reflectance)
14428 Last set:
14429 Absolute black has not been set.
14430 Measure the opening on your Black Trap until you hear the 'measurement done' sound.
14431 PANTONE MATCHING SYSTEM« - Coated
14432 PANTONE MATCHING SYSTEM« - Uncoated
14433 PANTONE« Metallic Colors - Varnished
14434 PANTONE« Metallic Colors - Unvarnished
14435 PANTONE« Pastel Colors - Coated
14436 PANTONE« Pastel Colors - Uncoated
14437 HKS« Colors
14438 PANTONE« Hexachrome« - Uncoated
14439 Profile Error
14440 A necessary profile could not be loaded. Please reinstall the application to repair this problem.
14441 Memory errors prevented a necessary profile from being loaded. Colors may not appear accurate.
14848 CMY
14849 CMYK
14850 RGB
14851 HSB
14852 HLS
14853 Lab
14854 YIQ
14855 Grayscale
14856 Registration Color
14857 Primary
14858 Complement
14859 Triangle1
14860 Triangle2
14861 Rectangle
14862 Pentagon
14863 Cooler
14864 Warmer
14865 Darker
14866 Lighter
14867 Less Saturation
14868 None
14869 Select Color
14870 O&ptions
14871 &Add To Palette
14872 C:
14873 M:
14874 Y:
14875 C:
14876 M:
14877 Y:
14878 K:
14879 R:
14880 G:
14881 B:
14882 H:
14883 S:
14884 B:
14885 H:
14886 L:
14887 S:
14888 L:
14889 a:
14890 b:
14891 Y:
14892 I:
14893 Q:
14894 Y:
14895 O:
14896 M:
14897 C:
14898 G:
14899 K:
14900 L:
14901 -
14902 Color Display
14903 Color General
14904 Color Profiles
14905 Automatic
14906 Perceptual
14907 Saturation
14908 Get profile from disk...
14909 Install from disk
14910 OK
14911 The specified location does not contain any profiles for your device.
14912 The device %s is already defined in %s.\nDo you want to replace the existing device file with the new one?
14913 CMYK255
14914 None
14915 Fixed Palettes
14916 Custom palette
14917 Spot palette
14918 Process palette
14919 Open Palette
14920 Save Palette As
14921 &Close
14922 The palette was changed. Do you want to save changes?
14923 Default
14924 Awaiting calibration data.
14925 Calibration successful.
14926 Finish
14927 Cancel
14928 Open Palette...
14929 Adding all colors selected will exceed the maximum\nallowable entries for the palette being edited.\nDo you want to add just the first %d colors selected?
14930 You have reached the maximum allowable entries for\nthe palette being editted. You may not add any more colors.
14931 Color Table
14932 Other...
14933 Palette: Image Colors
14934 Palette: New
14935 Palette: %s
14936 New Palette
14937 Open Palette
14938 Save Palette
14939 Save Palette As
14940 Add color(s) to %s
14941 bytes
14942 This will discard all the changes you made to the palette.\nDo you want to proceed?
14943 This is not a custom palette!
14944 In open documents, objects using the color(s) you are about to delete will appear black. Continue with delete?
14945 Do you want to delete '%s' from this palette?
14946 Do you want to delete selected colors from this palette?
14947 Unable to add color, color is already in the palette!
14948 Unable to add colors that are already in the palette!
14949 Unable to replace this color with one that is already in the palette!
16385 SCEDIT.EXE
16388 Unable to load Corel SCRIPT Compiler DLL SCCOMP
16389 Unable to load Corel SCRIPT Interpreter DLL SCINT
16390 DLL Entry point not found
16391 Corel SCRIPT Error
16392 Script contains an error and could not be run.
16393 Script %s contains an error and could not be run.
16400 This operation is not available
16401 You need an open document for this operation
16402 You cannot Playback/Run a Script while recording
16403 A Begin... command is needed before this command
21973 '%s - %s' is no longer available. A component\nof your application may have been uninstalled.
21974 '%s - %s' is no longer available.
21975 Reset the status bar to original settings? (This operation cannot be undone)
21976 Wednesday, September 30, 2000
21977 Table
21978 Columns
21979 Cancel
21980 &Update
21981 Save Copy &As...
21982 Main Table
21983 Clear Bitmap\nThis will clear off all the drawing irrevocably.\nAre you sure you want to proceed?
21984 Copy Bitmap\nSome other application has the clipboard ownership.\nRetry after closing all other applications.
21985 Paste Bitmap\nThis operation will erase the bitmap being edited.\nDo you want to continue?
21986 Paste Bitmap\nUnable to complete operation.\nMake sure that the clipboard contains a bitmap.
21987 Restore Defaults\nYou will lose the customized button properties irrevocably.\nAre you sure you want to proceed?
21988 Import Bitmap\nBitmap too large for the toolbar button.\nDo you want to shrink it to fit?\n\nHint: Shrinking may distort the image\n Click NO if you want to pan around the cropped bitmap
21989 Import Bitmap\nBitmap too large for the toolbar button.\nDo you want to shrink it to fit?\n\nHint: Shrinking may distort the image\n Click NO if you want to pan around the bitmap
21990 Drop File\nInvalid file format.\nYou can drop only .BMP and .DIB files
21991 Button Properties
21992 Edit &Scale...
21993 Re&solution...
21994 per tick
21995 Roll-Up Groups
21996 %s : %s
21997 This will cause the drawing scale to be reset to 1.0. Continue?
21998 Keyboard Shortcuts
21999 Page : %d
22000 Text File (*.txt)
22001 *.txt
22003 Spacing
22004 Frequency
22005 &X1:
22006 Y&1:
22007 &X:
22008 &Y:
22009 There is already a Roll-Up Group with that name. Please use a different name.
22010 &Other...
22011 1:
22012 2:
22013 3:
22014 Rotation values
22015 Link files
22016 The item '%s' referred by this link file is missing.\n\n Do you want to try to resolve the link ?
22017 Unable to delete the file '%s'\nA read-only attribute may be the cause.
22018 Unable to launch '%s'
22019 Shortcut to
22020 The maximum number of tabs are already present
22021 CorelDRAW!
22022 Error
22023 Error saving file
22024 Error allocating memory
22025 Image
22026 Text
22027 Shortcut Key Configuration
22028 Save the current shortcut key configuration in\n'%s' ?
22029 Reset to default application settings?
22030 Shortcut key Files (*.sck) | *.sck||
22031 Command\nTable\nKeyStroke\nDescription
22032 Keyboard Shortcuts
22033 Page : %d
22034 Shortcut keys print better in landscape mode.\n Do you want to print in landscape mode?
22035 &Options <<
22036 Status Bar
22037 &Hide
22038 The %s '%s' no longer exists\nDo you want to remove all occurences of it from the application
22039 &Find...
22040 &One Inch Margins
22041 &One Centimeter Margins
22050 place a grid dot every
22051 place a grid line every
22297 Edit Links to Corel on the Web\nEdit Links
22787 %
22788 Delete last selected arrow?
22789 Outline Color
22791 Vector Pattern
22792 Vector Pattern
22793 Two-Color Bitmap Pattern
22794 Error: Nothing selected, cannot delete.
22795 Delete Full-Color Pattern
22796 Error: File %s has been deleted.
22797 Delete File: %s?
22798 Delete currently selected Two-Color Pattern?
22799 Delete Two-Color Pattern
22800 Two-Color Foreground
22801 Two-Color Background
22802 Fountain Fill
22803 Uniform Fill
22804 Full-Color Bitmap Pattern
22805 Tiles.ini Not Found
22806 Delete currently selected Bitmap Pattern?
22807 Delete Bitmap Pattern
22808 Cannot Open Full-Color Bitmap File
22809 Load
22810 Pattern File (*.pat)|*.pat||
22812 Could not import selected file
22813 Delete currently selected Full-Color Pattern?
22814 Error: Could not
22815 There are too many dots and dashes, please remove some to continue.
22816 Fountain Fill
22817 Default
22818 Delete preset: %s?
22819 Edit Line Style Warning
22820 2-color
22821 Full color
22822 Bitmap
22832 %s is read only. \n\n CorelDRAW cannot create the arrow !
22833 Create Arrow
22834 HAIRLINE
22835 Delete Arrowhead
22848 Linear
22849 Radial
22850 Conical
22851 Square
22852 Preset already exists,\n Overwrite ?
22853 Rectangular
22864 Texture Fill
22865 The format of the file %s is not currently supported for use as a fill.
22866 Style Name:
22867 Arrowhead file CORELDRW.END could not be found
22868 Save Texture as
22869 Texture exists in this Library,\n Overwrite ?
22870 Please enter a different name.
22871 Delete Texture: %s?
22872 Texture Options
22873 %s bytes
22874 Error generating Texture
22875 Insufficient memory to complete Texture
22876 Are you sure?
22877 Function not found in TXR_EngineProc
22878 TXR_EngineProc not found in Texture DLL
22879 Texture DLL not found
22880 Could not find your Texture directory
22890 Error during Save As
22891 Texture file CORELDRW.TXR could not be found.
22892 You cannot Save in the Styles Library
22893 Cannot Open Texture Bitmap File
22894 None
22895 Hairline
22896 Could not create any new outline style,\nthe maximal number of outline styles being reached.\n\nPlease remove some outline styles if you want to add new ones.
22897 Fountain Transparency
22898 Texture Fill
22899 Texture Transparency
22900 Pattern Fill
22901 Pattern Transparency
22902 tiles\
22903 patterns\
23552 Invalid Custom Directory specified in corelapp.ini.
23554 coreldrw.hlp
23555 Find and Replace
23556 Find has reached the end of the text.\nDo you want to continue the search\nfrom the beginning of the text?
23557 Search text not found!
23558 Unknown Operation
23559 Typing
23560 Break Paragraph
23561 Delete
23562 Delete Selection
23563 Paste
23564 Cut
23565 Select Text
23566 Cursor Move
23567 Apply Style
23568 Revert To Style
23569 Change Multiple Attributes
23570 Change Alignment
23571 Change Spacing
23572 Change Tabs
23573 Change Bullet
23574 Change Indents
23575 Change Hypenation
23576 Change Color
23577 Change Typeface
23578 Change Type Style
23579 Change Type Size
23580 Change Type Angle
23581 Change Character Shifts
23582 Change Range Kerning
23583 Change Line Attributes
23584 Change Drop Cap
23585 Change Case
23586 Replace Text
23587 Change Paragraph Text Frame
23588 Drag and Drop Text
23589 Change Anchor Name
23590 Change HotLink
23591 Change Text Interactively
23592 _ENG Change Direction
23593 Type Assist
23594 Drag Out of Text
23595 Type Assist
23596 .?!& í┐
23597 monday
23598 tuesday
23599 wednesday
23600 thursday
23601 friday
23602 saturday
23603 sunday
23605 This entry already exists. Do you want to Replace it?
23606 Are you sure you want to delete this entry?
23607 % of Char. height
23608 points
23609 % of Pt. size
23610 AaBbYyZz
23611 This is a TrueType font.
23612 This is a PostScript Type 1 font.
23613 (none)
23614 Single Thin
23615 Single Thin Word
23616 Single Thick
23617 Single Thick Word
23618 Double Thin
23619 Double Thin Word
23620 ╞x╞xAa12
23621 Thin
23622 Thin-Italic
23623 ExtraLight
23624 ExtraLight-Italic
23625 Light
23626 Light-Italic
23627 Normal
23628 Normal-Italic
23629 Medium
23630 Medium-Italic
23631 SemiBold
23632 SemiBold -Italic
23633 Bold
23634 Bold-Italic
23635 ExtraBold
23636 ExtraBold-Italic
23637 Black
23638 Black-Italic
23639 (Not Found)
23640 There are no fonts available for text.
23641 (none)
23642 Small CAPS
23643 All CAPS
23644 Subscript
23645 Superscript
23646 Bullet
23647 Drop cap
23648 Underline(&U)
23649 Leftline(&U)
23650 Overline(&O)
23651 Rightline(&O)
23652 Default Graphic
23653 Default Artistic Text
23654 Default Paragraph Text
23656 Edit Underline
23657 Edit Overscore
23658 Edit Strikethru
23659 Paragraph Text Frames:
23660 Linked Frames:
23661 Empty Frames:
23662 Not all of the text fits in the frames.
23663 Not all of the text fits in the frame.
23664 Artistic Text Objects:
23665 Paragraphs:
23666 Paragraphs:
23667 Lines:
23668 Words:
23669 Characters:
23670 \nAll Text In Document
23671 Selection:\n%d Artistic Text Object, %d Paragraph Text Frame
23672 Selection:\n%d Artistic Text Object, %d Paragraph Text Frames
23673 Selection:\n%d Artistic Text Objects, %d Paragraph Text Frame
23674 Selection:\n%d Artistic Text Objects, %d Paragraph Text Frames
23675 \nSelection: Artistic Text Object
23676 \nSelection: %d Artistic Text Objects
23677 \nSelection: Paragraph Text Frame
23678 \nSelection: Linked Paragraph Text Frames
23679 \nSelection: %d Paragraph Text Frames
23680 Number of styles used:
23681 Fonts used:
23682 Bullet &indent:
23683 There are already %d tabs which is the maximum number allowed.
23684 There are no symbol fonts installed.
23685 Selected Frames Only
23686 Selected And Subsequent Frames
23687 All Frames
23688 This action cannot be completed because it would produce a paragraph that is greater than the maximum allowable length.
23689 Can't Allocate memory to be used for proof reading a sentence.\nSentence skipped
23690 Error allocating memory.\nProcess is not completed.
23691 This is not a valid number.\nCan't set the new font size.
23692 Text import error
23693 This action cannot be completed because it would produce a text object with too many paragraphs.
23694 Font Options
23695 Please select at least one font option
23696 Please select at least one type of style in the style list
23697 There isn't any text in this document!
23698 No fonts available. Reset all options.
23704 Spell Assist internal error '%d'.
23705 Add
23706 No Alternate Spelling
23708 Cannot initialize Spell Assist
23709 Cannot initialize QuickSpell plug-in
23710 Error while checking word
23711 Cannot initialize Hyphenation
23712 Cannot shutdown Hyphenation
23713 Soft Returns
23714 Hard Returns
23715 Tabs
23716 Spaces
23717 Fail to set spell assist data
23718 Grayscale value:
23719 Tint value:
23720 Format Text
23724 !%),.?]}íúñѺ¿⌐¬½¼¡«»░▐▀üAüBüCüDüEüFüGüHüIüJüKüRüSüTüUüXü[üfühüjülünüpürütüvüxüzü9 üRüìü}ü ü ü± x í ú Ñ º ┴ ß π σ ∞Æ@ÆBÆDÆFÆHÆbÆÆÆ& Æ! Æ}Æ" Æ
23725 $([\{óüeügüiükümüoüqüsüuüwüyüÅüÉü
23726 ,.íñüAüBüCüD
23727 Top
23728 Bottom
23729 Full
23730 Center
23731 Left
23732 Right
23733 Decimal
23734 Tabs
23735 Alignment
23736 Leadered
23737 Latin
23738 Hebrew
23739 Arabic
23740 All Characters
23741 Latin Characters
23742 Arabic Characters
23743 Hebrew Characters
23744 Apply to
23745 Direction
23746 Right-to-left columns
23747 Asian Characters
24848 Invalid file handle
24849 Out of Memory
24850 Invalid resource data
24851 I/O read error
24852 I/O write error or Disk is full
24853 Invalid file format
24854 Invalid header
24855 Invalid bitmap raw data
24856 Invalid compress data
24857 Internal Memory is corrupted
24858 Key is not in registry file.
24859 Invalid Parameters.
24860 Invalid filter.
24862 User Aborted
24863 Stack Violation
24864 Unrecoverable Error
24865 Invalid Arithmetic operation
24866 Memory Access Violation
24868 All File Formats
24869 *.*
24870 Import
24871 Export
24872 Full Image
24873 Crop
24874 Resample
24875 Partial Load
24876 Default
24877 Extension
24878 Description
24879 Most Recently Used
24880 Vector
24881 Bitmap
24882 Text
24883 Animation
24884 3D
24885 Sound
24903 Import Into Bitmap
24904 Bitmap Export
24905 This file contains an embedded profile.\nDo you want to apply it instead of the selected profile?
24906 This file contains an embedded profile.\nDo you want to apply it?
24907 Apply Embedded Profile
24908 This file does not contain RGB data; no color correction will be performed.
24909 Color Correction Warning
24916 Black and White
24917 Grayscale (8-bit)
24918 16 Colors
24919 Paletted (8-bit)
24920 RGB Color (24-bit)
24921 CMYK Color (32-bit)
24922 Option&s >>
24923 Option&s <<
24924 Pixels , Black and White (1-bit)
24925 Pixels , 16 Colors (4-bit)
24926 Pixels , Grayscale (8-bit)
24927 Pixels , 256 Colors (8-bit)
24928 Pixels , 16.7 Million Colors (24-bit)
24929 Pixels , 16.7 Million Colors (32-bit)
24930 Unknown
24931 Imp&ort
24932 E&xport
24933 bytes
24938 1 to 1
24939 640x480(VGA)
24940 800x600(SVGA)
24941 1024x768
24942 Custom
24943 Initial DIR
24944 Prev Check
24945 Import Type
24946 Use Def Value
24950 OPEN File Dialog
24951 SAVE File Dialog
24952 Option State
24954 Filter Manager
24955 Dithered
24956 Size Index
24957 Identical Value
24958 H Resolution
24959 V Resolution
24960 Width
24961 Height
24962 Anti Alias
24963 Resolution Index
24964 300 dpi
24965 200 dpi
24966 150 dpi
24967 72 dpi
24970 Color Index
24971 Color Profile
24973 Aspect Ratio
24974 Apply Mask
24975 Uncompressed
24976 FILTER ID
24978 already exists.\n\nReplace existing file?
24979 Cannot access this file because it is being used by another process
24981 is not the same format as the selected filter.
24982 A problem occurred when opening the file.
24984 QuickTime 3.0 is required.
24992 Raster
24993 Vector
24994 Text
24995 Animation
24996 Sound
25014 Check for Watermark
25015 Combine Multi-Layer Bitmap
25016 File Format Sort by
25017 Internet
25018 There must be at least one import/export filter available. A random filter was enabled.
25019 There are no import filters available
25020 There are no export filters available
25021 No Selection
25024 Pixels , Duotone (8-bit)
25025 Pixels , Lab Color, 16.7 Million Colors (24-bit)
25026 There are no internet filters available
25027 To enable changes to the installed filters, please close and re-open the current dialog
25028 Pixels , %ld Colors (%d-bit)
25029 Pixels , Grayscale (16-bit)
25030 Pixels , RGB (48-bit)
25031 Group Selected
25032 Either '%s' is not importable using the selected filter, or this format is not supported
25033 %s\nPath does not exist.\nPlease verify the correct path was given.
25034 96 dpi
25035 The file '%s' cannot be opened. Try using the Import command.
25036 Max No of MRU Filter
25037 List of MRU Filter
25038 Max No of MRU File Name
25039 List of MRU File Name
25040 Apply embedded ICC profile
25041 Extract embedded ICC profile
25042 Embedded ICC profile
25043 No White Spaces, Special Chars
25118 Font Manager
25119 No fonts were found. This application may not have been properly installed.
25120 No fonts were found. This application may not have been properly installed.
25121 Invalid font directory specified in corelapp.ini.
25122 A problem occurred accessing %s from the Font Navigator Catalog. The file\nfor this font should be located at %s.\n\nPlease ensure the Font Navigator Catalog has up to date information about\nthe fonts on the system. %s will be temporarily used to replace\n%s until the issue is resolved.
25125 (Not Found)
26147 &Edit
26148 &Edit,0,2
26149 &Open,0,2
26150 \nPresentation Exchange Objects have full display capabilities, but logical information may not be preserved.
26375 Limit of %d 'plug-in' filters reached - Ignoring the rest.
26376 Could not load %s.
26378 a memory full
26379 a user cancelled
26380 a read error
26381 a write error
26382 an open error
26383 an I/O error
26384 an error
26385 a null handle error
26386 a disk full error
26387 an end-of-file error
26388 Plug-in filter '%s' in file %s reported %s condition.
26389 an error %d
26390 Unknown
26391 Other
26392 a bad parameters
26393 an unsupported image type
26394 This plug-in is attemping to use a feature not implemented by Corel PHOTO-PAINT.
26395 Warning
26397 a missing .ini file
26399 Some plug-ins could not be loaded. There could be a memory shortage.
26401 an internal error
26402 This filter does not support the current image type.
26403 There is no scanner installed in this system.
26404 Problems acquiring from the scanner.
26405 This host does not support this plugin.
27461 Memory
27462 File
27463 Buffered
27464 An Unknown Error has occured in the Twain Source Manager during Initialization.\n\nTwain functionality will be disabled.
27465 The Twain Source Manager could not be Loaded, the file Twain_32.dll is either missing or corrupted.\n\nTwain functionality will be disabled.
27466 The Twain Source Manager could not be Initialized.\n\nTwain Functionality will be disabled.
27467 No Twain Drivers could be found.\n\nPlease make sure that your Twain Driver(s) have been installed properly.
27468 The Selected Twain Driver could not be enabled.\n\nThe driver is either busy, or the Hardware is not installed properly.
27469 An Unknown Error has occured during Image Acquisition.
27470 A Low Memory Error occured during Twain Image Acquisition.\n\nPlease try reducing the size of your Image.
27471 A Low Disk Space Error has occured during Twain Image Acquisition.\n\nPlease try reducing the size of your Image, or free up some disk space.
27472 The Selected Image is too large.\n\nPlease try reducing the size of your Image.
27474 The Twain Driver could not complete the Image Acquisition to Memory.\n\nPlease try Buffered, or File Mode from the Options Dialog.
27475 The Twain Driver could not complete the Image Acquisition in Buffered Mode.\n\nPlease try Memory, or File Mode from the Options Dialog.
27476 The Twain Driver could not complete the Image Acquisition to File.\n\nPlease try Memory or Buffered Mode from the Options Dialog.
27477 An Unknown Error occured when creating a temporary file.\n\nPlease check your Windows temp Directory and try again.
27478 The Selected Image has an unsupported Pixel Depth.\n\nPlease try reducing the number of colors in your image.
27479 Buffered Transfer Mode does not support Planar Data.\n\nPlease try Native or File Transfer Mode with this Twain Driver.
27480 This image contains an unsupported image data type.\n\nPlease check the options in your Twain Driver for B&W, Gray, or RGB Selections.
27481 This Twain Driver does not support File Transfer Mode.\n\nPlease try Native, or Buffered Mode from the Options Dialog.
27482 CorelSCAN 8
27483 Failed to launch CorelSCAN correctly
27490 Failed: %s %s\n\nIn order to use CorelSCAN with this Twain Driver, you must scan with the Vendor User Interface.
27491 Set Current
27493 Get Supported
27494 Get Current
27495 Image Layout
27496 Resolution
27497 Bit Depth
27498 Pixel Type
27499 CorelSCAN has detected a serious problem with a previous test using this device.\n\nDo you wish to try the test again?
27501 Testing: %s
27502 Feeder
27503 Native Resolution
27504 Physical Size
27505 Scan
27506 The Current TWAIN Driver has already been tested. \n\nDo you wish to perform the test again?
27507 CorelSCAN is about to begin a scan compatibility\ntest for the driver you have selected. Please\nsave ALL your work before starting this test.\n\nDo you wish to proceed?
27508 Protocol
27509 Scanner
27510 Unknown
27511 Driver UI
27512 Feeder
27513 Flat Bed
27514 An unknown error has occured.\n\nPlease make sure you Scanner software is installed properly.
27515 An error has occured while trying to access a Scanner protocol.\n\nPlease make sure your Scanner software is installed properly
27516 There is no Scanner currently selected.\n\nPlease choose the scanner you wish to use.
27517 No Scanners could be detected in your system.\n\nPlease make sure you have installed the software for your Scanner correctly
27519 A Low Memory Error occured.\n\nPlease try reducing the size of your Image, or close some applications
27520 A Low Disk Space Error has occured.\n\nPlease try reducing the size of your Image, or free up some disk space.
27521 There is a problem with the Image paramaters used for this scan.\n\nPlease try adjusting your Image and try again.
27522 An error occured while trying to create Scan Buffers.\n\nPlease free some memory and try again.
27523 Scanner reports that incoming image data is Planar.\n\nCorel currently does not support Planar Image Data.
27524 This image contains an unsupported image data type.\n\nPlease check the options in your Twain Driver for B&W, Gray, or RGB Selections.
27525 The Selected Image has an unsupported Pixel Depth.\n\nPlease try reducing the number of colors in your image.
27526 An error occured while trying to start your Scanner.\n\nPlease make sure it is connected properly.
27527 Generic Profile
27528 An error occured trying to start your scanner's Automatic Document Feeder.\n\nPlease make sure it is connected properly.
27529 You cannot run multiple instance of CorelSCAN
27530 None
27531 Your digital camera has been successfully opened.
27532 An error has occured connecting to your camera. Please switch it off and on again before retrying.
27533 Error reading from a file. Please check that all your .dlls are present.
27534 Error opening the file. Please make sure it has not been deleted.
27535 The active camera does not support thumbnails.
27536 No camera drivers were found. Make sure you have all necessary files in the same folder as your application executable.
27537 This camera is unknown.
27538 The camera is already connected.
27539 The camera is not opened.
27540 The camera does not support the date features.
27541 Unable to load this driver.
27542 There were no *.IN fles found. They are required to read an image.
27543 There were no *.OUT fles found. They are required to read an image.
27544 The active camera does not support the GetSelectedPhoto function.
27545 Error creating the temp file. Please check if you have enough disk space.
27546 Not enough memory. Please close some applications before trying again.
27547 Unable to determine the number of images on this camera.
27548 The camera is no longer responding. Please switch it off and on again.
27549 Unable to proceed: the file to upload does not exists.
27550 This file type is not supported by the camera. Please convert the file before trying again.
27551 Unable to determine the file types supported by this camera.
27552 This camera does not support uploads. The corresponding menu will be grayed out.
27553 IXLACAM.DLL is missing. Please re-install your software.\n
27554 There are no camera profiles in your windows' DCI directory.\nPlease make sure you select a camera profile when running the setup.
27920 (PANOSE default)
27921 (Corel default)
27922 Temp
27923 Perm
27924 Save changes to your font matching exceptions file?
27925 Save changes
27926 Install font from Bitstream Font Navigator Font Catalog
28065 Blank font name
28066 Font names may not be left blank.
28067 Exception conflict
28068 A matching exception already exists for this font.
28069 Duplicate Macintosh name
28070 An alternate spelling rule for this Macintosh font name already exists.
28071 Duplicate Windows name
28072 An alternate spelling rule for this Windows font name already exists.
28073 Memory allocation failure
28074 An error occurred allocating memory.
28075 List full
28076 No more entries can be added to the required list.
28671 CorelCMS90
33010 Creates a new image\nNew
33011 Opens an image from disk\nOpen
33012 Closes an image\nClose
33013 Saves an image to disk\nSave
33014 Saves an image to disk with a new name\nSave As
33015 Selects an external device for importing images\nSelect Source
33016 Imports an image from an external device\nAcquire
33017 Prints images\nPrint
33018 Shows images as they will be printed and provides print settings options\nPrint Preview
33020 Saves a duplicate of an image to disk\nExport
33021 Selects another partial area to open\nSelect Partial Area\nPartial Area
33023 Opens the last saved version of an image from disk\nRevert
33024 Saves an image to the PDF file format\nPublish To PDF\nPublish To PDF
33025 Provides print setting options\nPrint Setup
33026 Saves an image and image map information to disk\nPublish To Internet\nPublish To Net
33027 Opens an image for low-res editing\nLow-Res Open
33028 Renders a new copy of the low-res image\nLow-Res Render
33029 Version control system for files\nVersion Control
33030 Archives an image\nArchive Current
33031 Retrieves an archived version of an image\nRetrieve Current
33032 Retrieves a version of an archived image\nRetrieve Document
33033 Selects a camera for importing images\nSelect Camera
33034 Imports an image from a camera\nGet Image
33035 Sends an image to a camera\nSend to Camera
33036 Closes the current OLE image\nClose
33037 Updates the current OLE image in the OLE client\nUpdate
33038 Exits the program and returns to the OLE client\nExit
33039 Saves a copy of the current OLE image to disk\nSave As
33046 Digital Camera Information on the Web
33047 Go to Corel's Graphics Applications Community on the Web
33048 Clipart and Photos on the Web
33049 Photo Services, Scanning and Digital Photography on the Web
33050 Reverses the last operation\nUndo
33051 Saves the image in its current state\nCheckpoint
33052 Restores the image to the last Checkpoint\nRestore To Checkpoint\nRestore Checkpoint
33053 Cuts the selection and places it on the Clipboard\nCut
33054 Copies the selection and places it on the Clipboard\nCopy
33055 Pastes the image data from the Clipboard as a new object\nPaste As Object
33056 Pastes the image data from the Clipboard as a new document\nPaste As New Document\nPaste As Document
33057 Removes the selection without saving the image data to the Clipboard\nClear
33058 Clears the contents of the clipboard\nClear Clipboard
33059 Saves the selection to disk\nCopy To File
33060 Imports an image from disk\nImport
33063 Applies fills and transparency to an image\nFill
33064 Resets paint, paper and fill colors to their default values\nReset Colors
33065 Repeats the last executed command\nRepeat Last Command\nRepeat Last
33066 Pastes the image data from the Clipboard as a new selection\nPaste As Selection
33067 Pastes the image data from the Clipboard into the current selection\nPaste Into Selection
33068 Redoes the last undo operation\nRedo
33069 Swaps the paint and paper colors\nSwap Paint/Paper Colors\nSwap colors
33070 Saves the current selection to disk and sets it as the current fill\nCreate Fill From Selection\nFill From Selection
33071 Copies the visible area in the selection and places it on the Clipboard\nCopy Visible
33072 Fades the last executed command by the amount you specify\nFade Last Command\nFade Last
33097 Converts an image to NTSC RGB Video color mode\nConvert to NTSC RGB Video\nConvert NTSC RGB
33098 Converts an image to PAL RGB Video color mode\nConvert to PAL RGB Video\nConvert PAL RGB
33099 Applies selective color correction\nSelective Color
33100 Stitches multiple images into one image\nStitch Images\nStitch
33101 Converts an image to Black-and-White color mode\nConvert to BW\nConvert BW
34534 Creates an irregular mask by following edges\nScissors Mask Tool\nScissors
34535 Creates transparency by color selection\nTransparent Color Selection Tool\nTrans. Color
34536 Adds a dropshadow effect to selected objects\nObject Dropshadow
34551 Zoom tool flyout\n Zoom
34552 Undo tool flyout\n Undo
34554 Shape tool flyout\n Shape
34555 Mask tool flyout\n Mask
34556 Pick tool flyout\n Pick
34558 Fill tool flyout\n Fill
34559 Picker Mode\nPicker Mode\nPicker Mode
34560 Crop Mode\nCrop Mode
34561 Transparency tool flyout\n Trans.
34562 Brush tool flyout\n Brush
34600 Art Brush\nArt Brush
34601 Airbrush\nAirbrush
34602 Spray Can\nSpray Can
34603 Pencil\nPencil
34604 Ball Point Pen\nBall Point Pen
34605 Calligraphic Pen\nCalligraphic Pen
34606 Felt Pen\nFelt Pen
34607 Marker\nMarker
34608 Hi-Liter\nHi-Liter
34609 Chalk\nChalk
34610 Crayon\nCrayon
34611 Charcoal\nCharcoal
34612 Pastel\nPastel
34613 Water Color\nWater Color
34614 Artistic Brush\nArtistic Brush
34620 Smear\nSmear
34621 Smudge\nSmudge
34622 Brightness\nBrightness
34623 Contrast\nContrast
34624 Hue\nHue
34625 Hue Replacer\nHue Replacer
34626 Sponge\nSponge
34627 Tint\nTint
34628 Blend\nBlend
34629 Sharpen\nSharpen
34630 Undither\nUndither
34631 Dodge/Burn\nDodge/Burn
34640 Clone\nClone
34641 Impressionism Clone\nImpressionism Clone
34642 Pointillism Clone\nPointillism Clone
34643 Clone From Saved\nClone From Saved
34644 Clone From Fill\nClone From Fill
34800 Cannot initialize Visual Basic for Applications
34801 VBA Macros
34802 The VBA Project of the global document is locked because another instance of Corel PHOTO-PAINT 9\nis running. You will not be able to edit or view the global document macros.
34803 Corel PHOTO-PAINT 9 Visual Basic for Applications Macros
34804 You are about to lose any data in your VBA Project because of a\nprior Save option. Click OK to close, CANCEL to abort.
34805 This document can not be closed, it is currently reference by one or more other document(s).
34806 The Corel SCRIPT file was translated succesfully.
34807 The Corel SCRIPT file was not translated succesfully.
34808 The Corel SCRIPT to VBA translator reported a fatal error when translating.
35005 Image Sprayer File Name\nImage Sprayer File Name
35006 System Time\nTime
35007 System Date\nDate
35008 Caps Lock State Indicator\nCaps Lock Indicator
35009 Number Lock State Indicator\nNum Lock Indicator
35010 Scroll Lock State Indicator\nScroll Lock Indicator
35011 Paint Color - Double Click to Edit\nPaint Color - Double Click to Edit
35012 Paper Color - Double Click to Edit\nPaper Color - Double Click to Edit
35013 Current Fill - Double Click to Edit\nCurrent Fill - Double Click to Edit
35269 Bounding Circle (radius from centre)\nCircle (radius from centre)
35270 Format Text\nFormat Text\nFormat Text
35355 Shadow Feather Direction\nShadow Feather Direction
35356 Shadow Feather Edge\nShadow Feather Edge
35357 Shadow Fade\nShadow Fade
35358 Shadow Stretch value\nShadow Stretch value
35359 Shadow Preset\nShadow Preset
35360 Shadow Add Preset\nShadow Add Preset
35361 Shadow Delete Preset\nShadow Delete Preset
53296 &Time and Date
53297 &None
53298 &Memory
53299 &State Icons
53300 &Keyboard States
53301 &Large Color Swatch
53302 Sm&all Color Swatches
53303 Object &Information
53304 Object &Details
53305 Small Color S&watches
53307 _ENG Object &Tips
53354 Opens the Customize dialog with the Roll-Ups tab selected; provides the ability to customize the placement and grouping of Roll-Ups\nCustomize Roll-Ups
53501 Changes the spacing of text to have 1 line spacing\n1 Line Spacing
53502 Changes the spacing of text to have 1.5 line spacing\n1.5 Line Spacing
53503 Changes the spacing of text to have 2 line spacing\n2 Line Spacing
53504 Changes all text characters to capital letters\nAll Capitals
53505 Changes the style of text to subscript\nSubscript
53506 Changes the style of text to superscript\nSuperscript
53507 Sets/resets the DropCap for the text object (toggle)\nShow/Hide DropCap
53508 Increases the text indent\nIncrease Indent
53509 Decreases the text indent\nDecrease Indent
53510 Changes the alignment of text to force last line full alignment\nForce Full Alignment
53511 Changes the alignment of text to have no alignment\nNo Alignment
53512 Changes the alignment of text to center alignment\nCenter Alignment
53513 Changes the alignment of text to left alignment\nLeft Alignment
53514 Changes the alignment of text to right alignment\nRight Alignment
53515 Changes the alignment of text to full alignment\nFull Alignment
53516 Changes the style of text to underline\nUnderline
53517 Changes the style of text to bold\nBold
53518 Changes the style of text to italic\nItalic
53519 Sets/resets the bullet for the text object (toggle)\nShow/Hide Bullet
53520 Changes the justification of text to Top\nTop VerticalJustify
53521 Changes the justification of text to Bottom\nBottom Vertical Justify
53522 Changes the justification of text to Centre\nCenter Vertical Justify
53523 Changes the justification of text to Full\nFull Vertical Justify
53524 Adds or removes columns from a paragraph text frame\nColumns
53525 Formats the font face and weight of Artistic characters and text\nCharacter
53526 Formats the properties of Paragraph text\nParagraph
53528 Toggle Horizontal and Vertical text
54001 Opens the search dialog box, which searchs for help on a specific topic\nHelp Topics
54003 Displays copyright and program information\nAbout
54004 Controls where the contents of one or more document pages will be placed on each sheet of paper\nLayout
54005 Controls prepress settings, including printer's marks\nPrepress Options
54006 Controls color separation settings, if separations are enabled in the prepress options\nSeparations
54007 Controls miscellaneous printing options, such as proofing options and print quality\nMisc Options
