home *** CD-ROM | disk | FTP | other *** search
- 0 Nederlands
- 1 0
- 2 DAMNL.HLP
- 3 0
- 4 wzWZ
- 5 Partij beδindigd
- 6 Zettenlijst is vol
- 7 Onvoldoende geheugen
- 8 Fout bij lezen van\n
- 9 Fout bij schrijven van\n
- 10 Speler
- 11 met Wit
- 12 met Zwart
- 13 Remise
- 14 Fout bij activeren van seriδle poort
- 15 Ongeldige zet ontvangen
- 16 Dam afdruk
- 17 zetten in
- 18 minuten
- 19 &Volgende zet Insert
- 20 Eigenschappen
- 21 Tab
- 22 Computer
- 23 Leerniveau x
- 24 &Activeer verbinding
- 25 Tegenstander aan zet
- 26 Verzoek aan tegenstander
- 27 Verzoek van tegenstander
- 28 &Accepteer
- 29 &Weiger
- 30 DamExchange - Wacht op verbinding
- 31 DamExchange - Verbinding actief
- 32 DamExchange - Partij is aan de gang
- 33 Schrijf resultaten naar
- 34 DAM partij (*.dam)^*.dam^PDN bestand (*.pdn)^*.pdn^DOC bestand (*.doc)^*.doc^
- 35 DAM partij (*.dam)^*.dam^PDN bestand (*.pdn)^*.pdn^
- 36 PDN bestand (*.pdn)^*.pdn^
- 37 OK
- 38 niet gevonden
- 39 checksum onjuist
- 40 kan niet openen
- 41 lengte onjuist
- 42 Nieuwe partij
- 43 Evenement:
- 44 Plaats:
- 45 Datum:
- 46 Ronde:
- 47 Witspeler:
- 48 Zwartspeler:
- 49 Uitslag:
- 50 Wit wint
- 51 Zwart wint
- 52 Remise
- 53 Onbeslist / onbekend
- 112 Dam 2.2 v.7
- 113 DAM*.DLL
- 114 Elke keer bewaren
- 115 Geluid
- 116 Draaien
- 117 Veldnummers
- 118 Opzetten
- 119 Partij
- 120 Hoofdvariant
- 121 Geldige zetten
- 122 Boekzetten
- 123 DAM.OPN
- 124 DAM.END
- 125 Kleuren
- 126 Protocol
- 127 Dam
- 128 Taalkeuze
- 129 Klok
- 130 Tempo
- 131 Bestand
- 132 Bord
- 133 9600,n,8,1
- 134 PDN tekst
- 135 Computer
- 136 Speler
- 137 dam2.wav
- 138 dam1.wav
- 139 zet
- 140 slag
- 141 ongeldig
- 142 dam3.wav
- 143 Eindspelbestanden
- 144 Geheugen
- 145 Animatie
- 146 PDN opties
- 147 Meervoud
- 148 DamExchange
- 149 Verbinding0
- 150 Custom kleuren
- 151 damlog.pdn
- 152 Logbestand
- 153 Lognaam
- 154 Bordgrootte
- 155 Aanzicht
- 156 Bevestig nieuw
- 157 Bevestig einde
- 158 Dam-Bord
- 159 Dam-Tekst
- 160 Dam-Status
- 161 DAMEND.LST
- 162 Taal
- 163 Knoppenbalk
- 164 Font
- 165 Software\Harm Jetten\
- 1024 ERROR: %s failed with:
- 1025 Winsock startup completed.
- 1026 Winsock cleanup completed.
- 1027 Winsock 1.1 unavailable.
- 1028 Async request cancelled.
- 1029 Connection socket closed.
- 1030 Listening socket closed.
- 1031 Local host is %s.
- 1032 Listening started on port %u.
- 1033 Result: %s is %s.
- 1034 Trying to connect to %s at port %u.
- 1035 Resolving %s...
- 1036 No valid address found.
- 1037 New connection denied.
- 1038 Select notification
- 1039 Select notification: FD_ACCEPT, from %s port %u.
- 1040 Select notification: FD_CONNECT.
- 1041 Select notification: FD_CLOSE, closing...
- 1042 ...closed.
- 1043 WSAStartup()
- 1044 WSACleanup()
- 1045 WSAAsyncSelect()
- 1046 WSAAsyncGetHostByName()
- 1047 socket()
- 1048 bind()
- 1049 listen()
- 1050 accept()
- 1051 connect()
- 1052 send()
- 1053 recv()
- 10000 [0] No Error
- 10004 WSAEINTR: Interrupted system call
- 10009 WSAEBADF: Bad file number
- 10013 WSACCESS: Permission denied
- 10014 WSAEFAULT: Bad address
- 10022 WSAEINVAL: Invalid argument
- 10024 WSAEMFILE: Too many open files
- 10035 WSAEWOULDBLOCK: Operation would block
- 10036 WSAEINPROGRESS: Operation now in progress
- 10037 WSAEALREADY: Operation already in progress
- 10038 WSAENOTSOCK: Socket operation on non-socket
- 10039 WSAEDESTADDRREQ: Destination address required
- 10040 WSAEMSGSIZE: Message too long
- 10041 WSAEPROTOTYPE: Protocol wrong type for socket
- 10042 WSAENOPROTOOPT: Bad protocol option
- 10043 WSAEPROTONOSUPPORT: Protocol not supported
- 10044 WSAESOCKTNOSUPPORT: Socket type not supported
- 10045 WSAEOPNOTSUPP: Operation not supported on socket
- 10046 WSAEPFNNOSUPPORT: Protocol family not supported
- 10047 WSAEAFNNOSUPPORT: Address family not supported by protocol family
- 10048 WSAEADDRINUSE: Address already in use
- 10049 WSAEADDRNOTAVAIL: Can't assign requested address
- 10050 WSAENETDOWN: Network is down
- 10051 WSAENETUNREACH: Network is unreachable
- 10052 WSAENETRESET: Net dropped connection or reset
- 10053 WSAECONNABORTED: Software caused connection abort
- 10054 WSAECONNRESET: Connection reset by peer
- 10055 WSAENOBUFS: No buffer space available
- 10056 WSAEISCONN: Socket is already connected
- 10057 WSAENOTCONN: Socket is not connected
- 10058 WSAESHUTDOWN: Can't send after socket shutdown
- 10059 WSAETOOMANYREFS: Too many references, can't splice
- 10060 WSAETIMEDOUT: Connection timed out
- 10061 WSAECONNREFUSED: Connection refused
- 10062 WSAELOOP: Too many levels of symbolic links
- 10063 WSAENAMETOOLONG: File name too long
- 10064 WSAEHOSTDOWN: Host is down
- 10065 WSAEHOSTUNREACH: No Route to Host
- 10066 WSAENOTEMPTY: Directory not empty
- 10067 WSAEPROCLIM: Too many processes
- 10068 WSAEUSERS: Too many users
- 10069 WSAEDQUOT: Disc Quota Exceeded
- 10070 WSAESTALE: Stale NFS file handle
- 10071 WSAEREMOTE: Too many levels of remote in path
- 10091 WSASYSNOTREADY: Network SubSystem is unavailable
- 10092 WSAVERNOTSUPPORTED: WINSOCK DLL Version out of range
- 10093 WSANOTINITIALISED: Successful WSASTARTUP not yet performed
- 11001 WSAHOST_NOT_FOUND: Host not found
- 11002 WSATRY_AGAIN: Non-Authoritative Host not found
- 11003 WSANO_RECOVERY: Non-Recoverable errors: FORMERR, REFUSED, NOTIMP
- 11004 WSANO_DATA: Valid name, no data record of requested type
-