1003 \nDATCOM\nDATACOMponent Window\nTerminal Window (*.tml)\n.TML\nDATACOMponent.Terminal\nDATACOMponent Terminal\nCreates a terminal window providing access to on-line services and BBS systems. Enables you to transmit and receive data files.
1300 OLE initialization failed. Make sure that the OLE libraries are the correct version.
1301 Phone number must be entered!
1302 %1\n\nThis terminal is currently online and transfering a file. Please wait until the transfer is complete and hangup the line before closing the terminal.
1303 %1\n\nThis terminal is currently online and dialing. Please wait until the dialing is complete and hangup the line before closing the terminal.
1304 %1\n\nThis terminal is currently online. Are you sure that you wish to close the terminal?
1305 Error configuring communications port!
1306 Unable to open the specified line! Please make sure that the line exists and that no other application is using the communications port.
1307 The communications line is currently in use. Please wait until the line is available.
1308 Unable to initialize the modem! Do you wish to try again?
1309 Error creating transfer status window!
1500 User Cancelled!
1501 Retry count exceeded!
1502 File open failed!
1503 File seek failed!
1504 Carrier dropped!
1505 Out of disk space!
1506 Sender aborted!
1507 Sender cancelled!
1508 Unknown termination!
1509 Unknown reply from receiver!
1600 Terminal Options
1601 Settings For:
1602 Model Terminal
1603 MODELTML.MDL
1604 COM%d
1605 None
1606 TTY
1607 ANSI
1608 VT52
1609 VT100
1610 VT102
1611 No Flow
1612 Text Files (*.txt)|*.txt||
1613 All Files (*.*)|*.*||
1614 Capture Files (*.cap)|*.cap||
1615 Standard
1616 Terminal
1617 Edit
1618 Workspace Options
1619 Data
1620 DATACOMponent Help
1621 &About DATACOMponent
1622 DATACOMponent Print Capture
1623 Busy...
1624 No Answer...
1625 No Carrier...
1626 No Dialtone...
1627 Connected...
1628 Dialing...
1629 Re-dialing...
1630 Unknown
1631 Upload Files
1632 You must select at least one file to upload!
1633 ZModem
1634 XModem Checksum
1635 XModem CRC
1636 XModem 1K
1637 YModem Batch
1638 YModem-G
1639 CompuServe B/B+
1640 Kermit
1641 Quick-VAN
1645 Check for available disk space!
1646 Unable to create file transfer exchange file! %1
1647 Data Number Incomplete!
1648 &Phone Lists >>
1649 &Phone Lists <<
1650 Aborting...
1651 Waiting for start...
1652 Out of disk space!
1653 Download Terminated!
1654 Upload Terminated!
1655 Receiving file...
1656 Transmitting file...
1657 Upload Successful!
1658 Download Successful!
1659 On-Line...
1660 Off-Line...
1661 Please select the path to receive the downloaded file(s).
1662 Please select the name and path for the file download.
1663 Download Files
1664 The currently selected protocol supports download of only one file at a time!
1665 Too many errors!
1666 Receive overflow!
1667 Received NAK on sector!
1668 Timeout on sector ACK!
1669 Remote cancelled!
1670 No ACK on EOT!
1671 Receiver cancelled!
1672 Sender cancelled!
1673 Receive sector timeout!
1674 Sector out of sequence!
1675 Checksum failed!
1676 CRC failed!
1677 Out of sync!
1678 Received duplicate sector!
1679 File Skipped!
1680 %1 File
1681 %1 Files
1682 Unable to complete operation! Required file does not exist!
1683 Upload
1684 Download
1685 Complete!
1686 Incomplete!
1687 Transfer Successful!
1688 %1 of %2
1689 InBox Details -- File Transfer Job
1690 File successfully transfered!
1691 File skipped!
1692 File cancelled!
1693 File aborted!
1694 Error during transfer!
1695 File not transfered!
1696 %1 at %2
1697 %1 seconds until disconnect!
1698 %1 second until disconnect!
1699 CompuServe B/B+ is a HOST initiated file transfer protocol! Follow the instructions on your HOST to begin both file uploads and file downloads.
1700 Waiting to Redial...
1701 Failed to set desired comm port parameters!
33002 Send Clipboard contents to remote computer\nPaste to Host
33003 Put terminal in Normal view mode\nDisplay Terminal Normally
33004 Display Terminal Window Full Screen\nDisplay Full Screen
33006 Launch script editor with new script\nCreate New Script
33007 Open exisiting script for editing\nOpen Script File