32783 Change the windows graphical display options
32784 Change the sound playback options
32785 Test the speed of the pokey routines at current settings
32786 Information on the current sound mode/device
32787 Test the pokey processor overhead with current settings
32789 Select directories on your system to act as Atari HDs
32790 Pick which joystick to use and repeating options
32791 View the error/information log
32792 Save the output of the Pokey processor to a file
32794 Clear all saved settings/drives/ROMs
32795 Convert .DCM files to .ATR files for easier use
32796 Restart the emulated Atari
32797 Dump the exact state of the Atari to a file
32798 Read in a previously saved state file
32800 Saves a memory image with the ROMS (not normally necessary)
32801 Create custom keyboard templates
32802 Load an Atari executable file directly (not using Atari DOS)
57344 Atari800Win
57345 Speed: 100%
57346 Select an object on which to get Help
57600 Create a new document\nNew
57601 Open an existing document\nOpen
57602 Close the active document\nClose
57603 Save the active document\nSave
57604 Save the active document with a new name\nSave As
57605 Change the printing options\nPage Setup
57606 Change the printer and printing options\nPrint Setup
57607 Print the active document\nPrint
57609 Display full pages\nPrint Preview
57616 Open this document
57664 Display program information, version number and copyright\nAbout
57665 Quit the application; prompts to save documents\nExit
57666 Opens Help\nHelp Topics
57667 List Help topics\nHelp Topics
57668 Display instructions about how to use help\nHelp
57669 Display help for clicked on buttons, menus and windows\nHelp
57670 Display help for current task or command\nHelp
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59142 100%
59143 WARNING: This mode can be up to 15 times slower than the smaller window size. If you don't have an AGP card it is likely to be very slow. Are you sure you want to switch to it?
59144 When using this mode, the menus will not normally be visible. However, they are still there. You can activate them by using Alt-F, Alt-E, etc. Or you can hit F10 and then use the arrow keys to move back and forth. Also, the mouse will not be visible until you move it.
59145 This can create a very large file over time. Do not run this mode for long periods. After you ok this dialog you will be prompted for the filename, the format of the sound file is your current sound rate, mono, 8-bit pcm. Re-selecting this menu will stop the recording.
59146 WARNING: This ROM does match the CRC expected. It could be fine (patched for instance) but it may also be corrupt. Be aware of this when using this ROM. Clicking 'Dont show' below will turn this message off only for this ROM type.
59148 The Atari computer has crashed. You should probably try a different Atari hardware setting for this disk, turn BASIC on or off, or run this program without patches. After you have made changes select Reboot from the Atari menu to restart.
59149 It is necessary with this upgraded version to clear some of your settings. Rom paths will remain but most other features will be set to default.
59150 In this mode you will see only a few lines of vertical overscan, and the menus will not normally be visible - use the Alt key to activate them, then a menu letter to get to the appropriate menu (i.e., Alt-F to get the File menu. Dialog boxes will be different in this mode due to its small size.
59151 In this mode the horizontal overscan area will be completely clipped off, but you will see all of the vertical overscan. As with 320X200 you will not see the menus until you use them, and dialog boxes will be small.
59152 A few cards do not have this mode (if you are reading this, you can use it). This is equivalent to 320x200 - very small vertical overscan, and no horizontal. The menus will not be visible until you use them as with 320x200 mode, but dialog boxes will be normal. The Atari display in this mode is stretched to two times it's original size.
59153 You will be able to see Windows menus normally, and also a fair amount of the vertical overscan area, but no horizontal area. The display is stretched to twice its original size.
59154 You will be able to see Windows menus normally, and all of the overscan area in both vertical and horizontal. The display is stretched to twice its original size, leaving a small amount of extra space around the borders of the screen.
59155 When this option is set the emulator will run in a normal Windows GDI display. While this is very compatible and allows features such as easy screen captures (via the PrintScreen key), it is slower than full screen and extremely slow when in a stretched display. In this mode you can select either 336x240 (full size Atari display with most overscan) or 672x480 (full size display times two). The color depth will be the same as your desktop depth.
59156 This mode uses DirectDraw in a window. It is generally slower than GDI mode but may be faster on your particular card. If you use this mode try switching AGP memory on and off in the display settings and see if it improves performance.
59157 Atari800Win Error
59158 A ROM load error prevented Atari800Win from booting. Check the ROM settings under Atari/Hardware and Atari/Cartridges menus. Would you like to view the error log to see the problem?
59159 Error loading ROM image
59160 Unknown ROM image format (bad size)
59161 Error opening the Windows registry to save information.
59162 Error writing a value to the Registry.
59163 Your last Atari session appears to have locked up. Would you like to re-initialize the Atari settings to ensure a safe start? (This will reset all disk drive and ROM settings, and turn off sounds and DirectDraw modes which you will have to re-select later)
59164 Your machine does not support a high resolution timer. This program cannot run without one.
59165 Hit return to begin.
59166 For 30 frames, the render time was %dms, making the average time %6fms
59167 .\n\nWARNING: This time is too slow to emulate a full speed Atari computer. Try a lower resolution.
59168 Benchmark results:
59169 This test is only effective when the atari is running\nand sound output is enabled.
59170 Hit return to begin sound test
59171 In 60 passes using the current buffer size\nof %d, the total time was %d ms, making\nthe average time %6f ms.
59172 Sound file closed
59173 Sound will not be heard, but WILL be recorded.\nRemember to turn off recording with this same menu option later.
59174 Error reading value from Registry - wrong size!
59175 Error reading the key %s from Registry.
59176 While %s,\nDirectDraw returned the unrecoverable error: %s\nGraphics will be set to non-DirectDraw, re-enable with the Atari/Graphics menu.\n\nWould you like to quit Atari800Win?
59177 DirectDraw Error (Atari800Win)
59178 While %s, DirectInput returned the unrecoverable error: %s
59179 DirectInput Error (Atari800Win)
59180 While %s, the multimedia system returned the unrecoverable error:\n%s\nSounds will be disabled, to re-enable them use the menu Atari/Sounds
59181 MMultimedia Error (Atari800Win)
59182 While %s, DirectSound returned the unrecoverable error: %s
59183 DirectSound Error (Atari800Win)
59184 DSCAPS_PRIMARY8BIT: No primary 8-bit buffer\n
59185 DSCAPS_PRIMARYMONO: No primary mono buffer\n
59186 DSCAPS_EMULDRIVER: No DirectSound driver present (emulated)\n
59187 You cannot use this DirectSound mode because some\nrequired features are not supported. These are:\n\n%s\nSound will be disabled.
59188 Memory allocation error! Atari800Win is out of memory.
59189 ROM Images (*.rom)|*.rom|BIN Images (*.bin)|*.bin|All Files (*.*)|*.*||
59190 releasing the primary surface
59191 releasing the memory surface
59192 releasing the scratch video surface
59193 allocating the DirectDraw object
59194 releasing the DirectDraw object
59195 setting the cooperative mode
59201 allocating the primary drawing surface
59202 blitting to the primary surface
59203 allocating a system memory drawing surface
59204 allocating a secondary video surface
59205 allocating a system memory drawing surface
59206 allocating a color palette
59207 setting a color palette for the memory surface
59208 setting a color palette for the primary surface
59209 obtaining a lock on the drawing surface
59210 restoring the DDraw surfaces
59211 creating a DirectInput joystick device
59212 setting a joysticks data format
59213 setting the DirectInput cooperative level
59214 setting a joysticks properties
59215 acquiring the joystick initially
59216 creating the DirectInput object
59217 enumerating the joystick devices
59218 setting the deadzone of the joystick
59219 adding an input device
59220 unlocking a directsound buffer
59221 trying to lock a sound buffer
59222 running a query on the DirectSound hardware
59223 opening the waveform device
59224 preparing the first waveform header
59225 creating the DirectSound object
59226 setting the DirectSound cooperative level
59227 setting the DirectSound cooperative level for priority access\n(try a 22Khz frequency setting)
59228 creating the primary buffer
59229 setting the format of the primary buffer
59230 setting the primary device into loop mode
59231 creating a sound buffer
59232 restoring a sound buffer
59233 preparing the waveform header
59234 setting the volume
59235 Are you SURE you want to do this? It will clear ALL of your settings, resetting everything to defaults. The next time you start the emulator it will load the new defaults.
59236 acquiring the joystick to read data
59237 This input device is already being used on Atari joystick port %d. Choose that port first and clear it if you want to use this input device on another port.
59238 There was an error while releasing the DirectDraw surfaces.
59239 Copyright (c) 1998 by Richard Lawrence\n \nThis program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
59241 This mode is mostly intended for people with LCD displays who can't switch resolutions. It does show less border than 800x600 but is slower (screen is 3X enlarged). Shows full Atari screen area plus Windows menus.
59242 This mode shows the full screen and overscan area. It is non-stretched and as such may be faster on some slower machines or video cards. You will be able to see the menus and status line.
59243 initializing the display at the selected resolution.
59392 Show or hide the toolbar\nToggle ToolBar
59393 Show or hide the status bar\nToggle StatusBar
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
