PC/CD Gamer UK 39/PCGAMER39.bin/games/amber/amberhub.dxr/00033_RearWindow.KILL when done.txt

Text File | 1996-11-08 | 8.4 KB | 342 lines

-- RearWindow XObject Example Movie
-- by David Jackson-Shields
-- vers. 1.0.2 (10/11/93)
--
-- © 1992-94 by Macromedia, Inc. and David Jackson-Shields
-- All Rights Reserved
--
-- This movie demonstrates the use of the RearWindow XObject, which requires
-- System 6.0.5 or later.
-- The uses of the "RearWindow XObject" are:
-- (1) When using a Stage size smaller than your monitor screen...you
--     can cover the Finder Desktop when running on system 7.x or later,
--     (or when running with systems 6.0.7 or later under "Multi-Finder" mode.)
--     Options include filling the Rear Window with:
--       (A) a 1-bit QuickDraw pattern: white, ltGray, gray, dkGray, black
--       (B) the Finder Desktop pattern (whether color or black & white)
--       (C) an indexed color of the current palette
--       (D) an RGB color (specified by Red, Green, Blue values)
--       (E) a Director bitmapped castMember (either stretched or non-stretched)
--       (F) a PICT file image (either stretched or non-stretched)
-- (2) To obtain the monitor screen pixel dimensions (top, left, bottom, right)

-- NOTE: The addition of an extra window even larger than your Stage will
-- impact the memory requirements of your project. Check the "About MM"
-- memory guage, or put the freeBytes and the freeBlock in the message
-- window to see the impact this extra window has, and adjust your movieΓÇÖs
-- memory management as needed. In addition, a copy of any castMember or
-- PICT file image used in RearWindow is kept in RAM. This is so it can
-- be redrawn in the RearWindow during update events...(like when the user
-- opens a Desk Accessory or goes to MultiFinder and back, etc.)


on ZZZstartMovie

  initRearWindow
  --coverDesktop -99

end ZZZstartMovie

--

on ZZZstopMovie

  releaseRearWindow

end ZZZstopMovie

--

on ZZZinitRearWindow

  global rwObj, gMaxColors, deskTopPattern, black

  set x = the colorDepth

  -- assign maximum index colors for the color depth setting:
  if x >= 8 then set gMaxColors = 255
  if x = 4 then set gMaxColors =  15
  if x = 2 then set gMaxColors =   3
  if x = 1 then set gMaxColors =   0
  if gMaxColors = 255 then
    put string( 100 ) into field "colorIndex" -- 100 works well with the stagecolor
  else
    put string( gMaxColors/2 ) into field "colorIndex"
  end if

  -- You must open an external library file if you do not have
  -- the "RearWindow" XCOD resource in the movie using ResEdit:
  if factory( "RearWindow" ) = 0 then
    OpenXLib "RearWindow.XObj"
  end if

  initGlobals
  if objectP( rwObj ) then rwObj( mDispose )
  makeObjIfNeeded
  when mouseDown then mouseHandler
  when keyDown then keyHandler

end initRearWindow

--

on ZZZreleaseRearWindow

  global rwObj
  if objectP( rwObj ) then
    rwObj( mDispose )
  end if

  -- You must Close the Xlib if you do not have
  -- the XCOD resource installed in the movie with ResEdit:
  CloseXLib

  put " " into field "stage&Screen"
  put " " into field "colorIndex"
  set the mouseDownScript to EMPTY
  set the keyDownScript   to EMPTY

end releaseRearWindow

--

on ZZZinitGlobals

  -- these 1-bit pattern values are constantized in this example movie
  -- for use when  calling the coverDesktop handler from button scripts:
  global white, ltGray, gray, dkGray, black, deskTopPattern

  set white   =  -1
  set ltGray  =  -2
  set Gray    =  -3
  set dkGray  =  -4
  set black   =  -5

  -- The Finder Desktop pattern is the default case. To specify the
  -- Finder Desktop, use any negative integer less than -5:

  set deskTopPattern = -99

end initGlobals

-- shows the name "Macromedia Director 3.x", "MacroMind Player 3.x", or
-- the name of the Projector:

on ZZZdisplayAppName

  global rwObj
  put rwObj( mGetAppName ) into returnStr
  put "The name of the current application is:" & RETURN & ¬
       QUOTE & returnStr & QUOTE into field "stage&screen"

end displayAppName

-- fills the RearWindow with 1-bit patterns or the DeskTop pattern:

on ZZZcoverDesktop patVar

  global rwObj
  makeObjIfNeeded
  rwObj( mPatToWindow, patVar )

end coverDesktop

--

on ZZZloadPICT

  global rwObj
  makeObjIfNeeded
  set fileName = the pathName & "Background.PICT"
  set retValue = rwObj( mPICTtoWindow, fileName, 1, -99 )
  if value( retValue ) < 0 then
    alert "System error" && retValue && "trying to load PICT file" && QUOTE & ¬
          fileName & QUOTE
    stopMovie
    exit
  end if

end loadPICT

--

on ZZZloadCast castName

  global rwObj
  makeObjIfNeeded
  set myPic = the picture of cast castName
  set retValue = rwObj( mCastToWindow, myPic, 1, -99 )
  if value( retValue ) < 0 then
    alert "Error trying to load castMember" && QUOTE & castName & QUOTE
    stopMovie
    exit
  end if

end loadCast

--

on ZZZUnCoverDesktop


end UnCoverDesktop

--

on ZZZmakeObjIfNeeded

  global rwObj
  if not objectP( rwObj ) then

    -- "M" indicates multiple monitors, "S" is for single monitor configuration.
    -- ONLY use "S" if there is not enough room for multiple monitors.
    -- So first...letΓÇÖs try it with multiple-monitor configuration:
    set rwObj = RearWindow( mNew, "M" )
    if value( rwObj ) < 0 then
      alert "System error" && rwObj && ¬
            "trying to create the RearWindow object in RAM (multiple-monitor config)."
      stopMovie
      exit
    end if
    writeStageAndScreenBounds
    if the freeBlock < rwObj( mGetMemoryNeeded ) then
      -- delete the object and create it again with a single-monitor config...
      if objectP( rwObj ) then
        rwObj( mDispose )
        set rwObj = RearWindow( mNew, "S" )
      end if

      if value( rwObj ) < 0 then
        alert "System error" && rwObj && ¬
            "trying to create the RearWindow object in RAM (single-monitor config)."
        stopMovie
        exit
      end if
      writeStageAndScreenBounds
    end if
  end if

end makeObjIfNeeded

--

on writeStageAndScreenBounds

  global rwObj
  set s = "Minimum Rect around All Screens:"
  set s = s && rwObj( mGetScreenTop    ) & ", "
  set s = s && rwObj( mGetScreenLeft   ) & ", "
  set s = s && rwObj( mGetScreenBottom ) & ", "
  set s = s && rwObj( mGetScreenRight  ) & RETURN
  set s = s &  "Stage dimensions are:"
  set s = s && the stageTop & ", "
  set s = s && the stageLeft & ", "
  set s = s && the stageBottom & ", "
  set s = s && the stageRight
  put s into field "stage&Screen"

end writeStageAndScreenBounds

-- this method works best with the Monitors Control Panel set to
-- 256 colors. It also works with fewer colors. With the Control
-- Panel set to ΓÇ£thousandsΓÇ¥ or ΓÇ£millionsΓÇ¥ of colors...the choice
-- of color is unpredictable.

on fillWithIndexColor

  global rwObj
  makeObjIfNeeded
  -- assigning index color:
  set patVar = value( field "colorIndex" )
  rwObj( mIndexColorToWindow, patVar )

end fillWithIndexColor

-- this method only works with the Monitors Control Panel set to
-- ΓÇ£thousandsΓÇ¥ or ΓÇ£millionsΓÇ¥ of colors:

on fillWithRGBColor

  global rwObj
  makeObjIfNeeded
  -- assigning Red, Green, and Blue values of the color:
  rwObj( mRGBColorToWindow, 10000, 25000, 65000 )

end fillWithRGBColor

--

on mouseHandler

  if ( the clickOn = 19 ) OR ( the clickOn = 20 ) then
    if the clickOn = 19 then
      bumpCIndex +1
    else if the clickOn = 20 then
      bumpCIndex -1
    end if
  end if

end mouseHandler

--

on keyHandler

  if the key = RETURN then
    fillWithIndexColor
    dontPassEvent
  end if

end keyHandler

-- a parameter of +1 increments the index, whereas
-- a parameter of -1 decrements it:

on bumpCIndex direction

  global rwObj, white, gMaxColors
  set cIndex = value( field "colorIndex" )
  if integerP( cIndex ) then
    set cIndex = cIndex + direction
    if ( cIndex < 0 ) OR ( cIndex > gMaxColors ) then
      exit
    else
      put string( cIndex ) into field "colorIndex"
      if cIndex then
        makeObjIfNeeded
        rwObj( mIndexColorToWindow, cIndex )
      else
        coverDesktop white
      end if
      repeat while the stillDown
        set cIndex = cIndex + direction
        if ( cIndex < 0 ) OR ( cIndex > gMaxColors ) then
          exit
        else
          put string( cIndex ) into field "colorIndex"
          if cIndex then
            makeObjIfNeeded
            rwObj( mIndexColorToWindow, cIndex )
          else
            coverDesktop white
          end if
        end if
      end repeat
    end if
  end if

end decrCIndex

--

on wait n

  startTimer
  repeat while the timer < n
  end repeat

end wait

--