home *** CD-ROM | disk | FTP | other *** search
- Stirling Technologies, Inc. (c) 1990-1994
- SRCDIR
- SRCDISK
- TARGETDISK
- TARGETDIR
- WINDIR
- WINDISK
- WINSYSDIR
- WINSYSDISK
- ERRORFILENAME
- INFOFILENAME
- SUPPORTDIR
- CMDLINE
- ISVERSION
- SHARED
- UNINST
- ISRES
- ISUSERC
- LAST_RESULT
- CMDVALUE
- HINST_INSTALL
- BATCH_INSTALL
- LOGHANDLE
- _sdRECT
- right
- bottom
- _sdSIZE
- SelectObject
- GetTextExtentPoint
- EnableWindow
- GetClassName
- GetDC
- GetDlgItem
- GetFocus
- GetWindowLong
- GetWindowRect
- GetWindowWord
- IsIconic
- IsWindow
- IsWindowEnabled
- MoveWindow
- USER
- ReleaseDC
- SetFocus
- SetWindowText
- ShowWindow
- LoadString
- KERNEL
- GetModuleHandle
- GetClientRect
- SetWindowPos
- PostMessage
- ShowCursor
- SystemParametersInfo
- WNetGetCaps
- KERNEL
- GetWinFlags
- CDSPEED
- GetCDROMSpeed
- Accolade, Inc.a
- Deadlock Demoa
- 1.20a
- Deadlock.exea
- Deadlock Demo
- Deadlock will require(
- 1.30(
- 37 Megs of hard drive space on your computer.
- 22 Megs of hard drive space on your computer.
- The Deadlock Demo will require 12 Megs of hard drive space on your computer.
- 1.30(
- Installation Note:
- Microsoft Win32s is an operating system extension that allows $
- Win32-based applications to run on Windows 3.1. Deadlock requires $
- Win32s v1.30 to be installed in order to run properly.
- Please read the Readme file at the end of installation for help $
- on getting Win32s. Deadlock will be installed but will not run $
- properly until you've installed Win32s.*
- Mbytes needed for Win32s
- Mbytes available on $
- Please free up some hard drive disk space
- Select Yes after deleting files.
- Select No to exit
- \DeadlockReboot
- Failed to Create a KeyA
- 1.30!
- Win32s installation failed.A
- Deadlock DemoF
- Accolade, Inc.a
- Deadlock Demoa
- 1.20a
- Deadlock.exe
- Programf\Accolade\Deadlock\
- Program Files\Accolade\Deadlock\
- There is not enough space available on the disk
- Please free up some space or change the target location
- to a different disk
- Deadlock.exe
- General
- Copying program files...
- Deadlock.Za
- *.*B:
- Copying program files...
- Deadlock.Za
- WAV\*.*B:
- Copying program files...
- Deadlock.Za
- DEADDLLS\*.*B;
- DeadlockDeinstKeyA
- Deadlock Demo
- Copying program files...?
- Unable to create a directory under b
- Please check write access to this directory.*
- General file transfer error.a0
- Please check your target location and try again.$
- Error Number:$
- Related File: $
- Creating Program Folder and Icons....&
- Deadlock Demo<
- Deadlock.EXE
- Deadlock Demob!
- README.TXT
- NOTEPAD.EXE b"
- Readme bD
- unInstallShieldb!
- Deadlock Demo<
- Deadlock Demob!
- \accolade.url
- Go to Accolade Websiteb#
- README.TXT
- NOTEPAD.EXE b#
- Readme bD
- NORMAL,
- w32cdspd.exe
- Misc\Intro2h.smk
- Deadlock.prf
- CDSPEED.DLL
- DLL LOAD FAILUREa*
- The DLL '%s' failed to load. Returned %d.bA
- NORMAL,
- LARGE
- LARGE(
- Deadlock offers its cinematic animations in both Large a
- and Normal versions.
- A diagnostic of your system performance has determined $
- your system can play Large movies in Deadlock.
- Once you're in the game, if you find the cinematic animations $
- skipping, tearing, or playing oddly, go to the Deadlock Personal $
- Settings under the File Menu and unselect 'Use Large Cinematics'.
- NORMAL(
- Deadlock offers its cinematic animations in both Large a
- and Normal versions.
- A diagnostic of your system performance has determined $
- your system can play Normal movies in Deadlock.
- Installation complete.
- Setup Complete$
- %P Setup is now complete.
- We recommend you read the README and HELPME files now $
- to get last minute changes and additions to Deadlock $
- as well as hints on common problems and troubleshooting. $
- Also, look for MODEM.TXT on the Deadlock CD for additional $
- information on serial and modem play.
- Click Finish to complete Setup.
- Yes, I want to view the README file.
- Yes, I want to view the HELPME file.
- HELPME.TXT3
- NOTEPAD.EXEbD
- README.TXT3
- NOTEPAD.EXEbD
- Deadlock DemoA
- WIN.INI&
- windowsa
- WIN.INI&
- Extensionsa
- IS3TMP.TMPR
- IS3TMP.TMP&
- windowsa
- IS3TMP.TMP&
- Extensionsa
- IS3TMP.TMP&
- windowsa
- dateR
- WIN.INI
- windowsa
- WIN.INI
- Extensionsa
- IS3TMP.TMPb
- \DeadlockReboot
- Installing a
- Deadlock Demo
- SetupA
- This program requires SVGA or better resolution.A
- EXPLORER.EXE!
- Win32s.Ini%
- Win32sa
- Setupa
- Win32s.Ini%
- Setupa
- setup
- VMCPD.386
- system.inib
- device(
- system.iniB
- device=*vmcpd
- system.inib
- SYSTEM.INI
- 386Enha
- devicea
- *vmcpd
- FreeCell
- Install FreeCellA
- Win32App%
- FreeCell
- Setup will now install the Win32s game, FreeCell, a1
- after which your system will be restarted and the$
- Deadlock Setup will continue.
- FreeCell
- Decompressing FreeCell files to b
- FreeCell.Za
- *.*B;
- FreeCelld
- FreeCellA
- Unable to create a directory under b
- Please check write access $
- to this directory.*
- General file transfer error. Please check a#
- your target location and try again.$
- Error Number:$
- Filename:$
- freecell.exe:
- Win32Appa
- FreeCellbD
- Win32AppA
- Freecell Setup Completea)
- FreeCell has been successfully installed.a(
- Click Finish to continue Deadlock setup.a
- Windows is running in Standard Mode. Win32s requires Enhanced Mode with paging enabled.A
- Win32s requires Virtual Memory.
- Use the control panel 386 Enhanced icon and configure Windows using the Virtual Memory option.A
- USER.EXE
- 3.10(
- Win32s Setup: SHARE.EXE is not loaded.
- File sharing must be enabled. Run SHARE.EXE before starting Windows, or add SHARE.EXE to your AUTOEXEC.BAT file.A
- Windows System directory b
- does not have write permission. $
- Change the access rights to this directory and then perform $
- the installation.
- Win32s
- Decompressing .NLS files into b
- WIN32S.Za
- NLS\*.*A
- Decompressing files into b
- WIN32S.Za
- SYSTEM\*.*B;
- Win32S
- Decompressing .DLL files into b
- WIN32S.Za
- WIN32S\*.dllB;
- Win32S
- Decompressing .EXE files into b
- WIN32S.Za
- WIN32S\*.exeB;
- Win32S
- Decompressing .DRV files into b
- WIN32S.Za
- WIN32S\*.drvB;
- Win32S
- Decompressing .386 Files into b
- WIN32S.Za
- WIN32S\*.386B;
- Decompressing OLE files into b
- WIN32S.Za
- OLESYS\*.*B;
- Win32S
- Decompressing OLE 32-bit files into b
- WIN32S.Za
- OLE32S\*.*B;
- Unable to create a directory under b
- . Please check write access $
- to this directory.*
- General file transfer error. a0
- Please check your target location and try again.$
- Error Number: $
- Filename: $
- Win32s.Ini%
- Win32sa
- Setupa
- Win32s.Ini%
- Win32sa
- Versionb
- SYSTEM.INIa
- w32S.386R
- device(
- SYSTEM.INIB
- SYSTEM.INIa
- w32S.386R
- device(
- SYSTEM.INIB
- System.Ini%
- WIN32S%
- w32S.386
- 386Enha
- devicebF
- System.Ini&
- Boota
- driversR
- winmm16.dll(
- winmm16.dll b
- System.Ini
- Boota
- driversb
- Win32s.Ini%
- Setupa
- Win32s%
- OLE2THK.DLL
- Win32s.Ini%
- Versionb
- Win32s.Ini%
- AnsiCPa
- 1252%
- WIN32S%
- W32S.386
- OLE2.REG$
- /S bD
- REGEDIT.EXEb
- SHARER
- /L:500A
- /F:5100A
- WINB:
- vshare.386R
- device=vshare.386
- system.inib
- device=vshare,
- system.inib
- SYSTEM.INI
- 386Enha
- devicea
- vshare.386
- WIN32S
- ADVAPI32.DLLbD
- WIN32S
- EM87.DLLbD
- WIN32S
- GDI32bD
- WIN32S
- KERNEL32bD
- WIN32S
- MPR.DLLbD
- WIN32S
- NTDLL.DLLbD
- WIN32S
- USER32.DLLbD
- WIN32S@
- C_*.NLSR
- WIN32S
- WIN32S@
- C_*.NLSR
- WIN.INI&
- windowsa
- WIN.INI&
- Extensionsa
- IS3TMP.TMPR
- IS3TMP.TMP&
- windowsa
- IS3TMP.TMP&
- Extensionsa
- IS3TMP.TMP&
- windowsa
- dateR
- WIN.INI
- windowsa
- WIN.INI
- Extensionsa
- IS3TMP.TMPb
- Deadlock.dpeR
- Check Setup for Reboot$
- Please Insert the a
- Deadlock Demo$
- Deadlock.dpe
- WIN.INI&
- windowsa
- IS3TMP.TMP%
- windowsa
- WIN.INI&
- Extensionsa
- IS3TMP.TMP%
- Extensionsa
- IS3TMP.TMP%
- windowsa
- dateb
- setup.exe -f32s
- WIN.INI%
- Extensionsa
- WIN.INI&
- windowsa
- setup.ins
- WIN.INI%
- windowsa
- System Check:
- Microsoft Win32s is installed on your system.
- Setup must restart Windows now to take advantage $
- of the 32-bit enviroment. If you choose not to $
- restart, Setup will cancel.
- Setup Must Restart Windows Now:
- Please shut down all applications and DOS $
- sessions before restarting Windows.
- If you choose a"
- not to restart, Setup will cancel.
- Restart Windowsb
- Setup is not complete.
- You must restart windows to go to the next half $
- of setup. When you're ready, run setup again to $
- fully install Deadlock.
- edit(
- SETUPSTR862RD
- Disk Space0
- temp.txt
- temp.txt
- In function '%s':
- Unable to create dialog.
- Make sure the _ISRES.DLL is in _SETUP.LIB.
- ErrorbE
- _sdSIZEa
- %s-%ldb
- SdRegisterUserEx!
- ResultA
- szNameA
- szCompanyA
- szSerialA
- SdRegisterUserEx!
- szNameA
- szCompanyA
- szSerialA
- ResultA
- SdRegisterUser!
- ResultA
- szNameA
- szCompanyA
- SdRegisterUser!
- szNameA
- szCompanyA
- ResultA
- SdConfirmRegistration!
- ResultA
- SdConfirmRegistration!
- ResultA
- SdConfirmNewDir!
- ResultA
- SdConfirmNewDir!
- ResultA
- SdAskDestPath!
- ResultA
- szDirA
- SdAskDestPath!
- szDirA
- ResultA
- SdWelcome!
- ResultA
- SdWelcome!
- ResultA
- SdShowInfoList!
- ResultA
- SdShowInfoList!
- ResultA
- SdSelectFolder!
- ResultA
- szFolderA
- SdSelectFolder!
- szFolderA
- ResultA
- SdSetupType!
- ResultA
- szDirA
- SdSetupType!
- szDirA
- ResultA
- SdShowAnyDialog!
- ResultA
- SdShowAnyDialog!
- ResultA
- SdDisplayTopics!
- ResultA
- SdDisplayTopics!
- ResultA
- SdShowMsg!
- SdShowMsg/
- _sdRECTa
- _sdRECTa
- bottom2
- SdAskOptionsList!
- ResultA
- ComponentA
- SdAskOptionsList!
- ComponentA
- ResultA
- SdShowFileMods!
- ResultA
- nSelectionA
- SdShowFileMods!
- nSelectionA
- ResultA
- SdShowDlgEdit1!
- ResultA
- szEdit1A
- SdShowEdit1!
- szEdit1A
- ResultA
- SdShowDlgEdit2!
- ResultA
- szEdit1A
- szEdit2A
- SdShowEdit2!
- szEdit1A
- szEdit2A
- ResultA
- SdShowDlgEdit3!
- ResultA
- szEdit1A
- szEdit2A
- szEdit3A
- SdShowEdit3!
- szEdit1A
- szEdit2A
- szEdit3A
- ResultA
- SdAskOptions!
- ResultA
- ComponentA
- SdAskOptions!
- ComponentA
- ResultA
- SdComponentDialogAdv!
- ResultA
- ComponentA
- szDirA
- SdComponentDialogAdv!
- szDirA
- ComponentA
- ResultA
- SdComponentMult!
- ResultA
- ComponentA
- SdComponentMult!
- ComponentA
- ResultA
- SdOptionsButtons!
- ResultA
- SdOptionsButtons!
- ResultA
- SdBitmap!
- ResultA
- SdBitmap!
- ResultA
- SdComponentDialog2!
- ResultA
- ComponentA
- SdComponentDialog2!
- ComponentA
- ResultA
- SdComponentDialogEx
- SdComponentDialogEx!
- SdComponentDialog!
- ResultA
- ComponentA
- szDirA
- SdComponentDialog!
- szDirA
- ComponentA
- ResultA
- SdLicense!
- ResultA
- ResultA
- SdStartCopy!
- ResultA
- ResultA
- SdFinishReboot!
- ResultA
- BootOptionA
- ResultA
- BootOptionA
- ResultA
- ResultA
- BootOptionA
- SdFinish!
- ResultA
- bOpt1A
- bOpt2A
- ResultA
- bOpt1A
- bOpt2A
- _EWQa
- _MRQ(
- 3.00.071
-