home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PC/CD Gamer UK 32
/
PCGAMER32.bin
/
nemdemo
/
dos
/
aildrvr.lst
< prev
next >
Wrap
File List
|
1996-03-18
|
22KB
|
760 lines
;████████████████████████████████████████████████████████████████████████████
;██ ██
;██ Miles Design Audio Interface Library ██
;██ ██
;██ Sound driver installation message file ██
;██ ██
;██ Default selection criteria/examples: ██
;██ ██
;██ .E BLASTER ........ Environment var 'BLASTER' must be present ██
;██ .C MVSOUND ........ CONFIG.SYS must contain 'MVSOUND' string ██
;██ .A AWEUTIL ........ AUTOEXEC.BAT must contain 'AWEUTIL' string ██
;██ ██
;██ .NE BLASTER ....... Environment var 'BLASTER' must NOT be present ██
;██ .NC MVSOUND ....... CONFIG.SYS must NOT contain 'MVSOUND' string ██
;██ .NA AWEUTIL ....... AUTOEXEC.BAT must NOT contain 'AWEUTIL' string ██
;██ .ND .............. Entry cannot be selected as default ██
;██ ██
;██ .T1 .............. Optional BLASTER Tn, if present, must be 1|3 ██
;██ .T2 .............. Mandatory BLASTER Tn must be 2|4|5 ██
;██ .T3 .............. Mandatory BLASTER Tn must be >=6 ██
;██ ██
;██ I/O default derivation: ██
;██ ██
;██ .IOB .............. Derive I/O defaults from BLASTER variable ██
;██ .IOD .............. I/O defaults = first driver default entry ██
;██ .ION .............. Do not allow manual I/O configuration at all ██
;██ ██
;██ .IOA .............. Use I/O address only (must appear at end) ██
;██ .IOL .............. Suppress high-DMA prompt (must appear at end) ██
;██ ██
;████████████████████████████████████████████████████████████████████████████
[sblaster.dig]
;
;Selected by default if BLASTER variable is of type T1 or T3 (or no T
;specifier), and no other "clone" variable exists (ULTRASND, MVSOUND, etc.)
;
;Default I/O parms from BLASTER
;
.E BLASTER
.T1
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.IOB
.IOL
.SPECIAL_TEXT
Select this driver for use with your Sound Blaster, Sound Galaxy, Pro Audio
Spectrum or Thunderboard. Other sound cards whichare not supported
directly may also work with this driver, as long as they provide hardware-
based Sound Blaster compatibility without emulation drivers or TSRs.
WARNING: This is a 8-bit sound card and does not meet a minimum requirement
for this game. Using this card will degrade sound quality.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sbpro.dig]
;
;Selected by default if BLASTER variable is of type T2, T4, or T5
;and no other "clone" variable exists
;
;Default I/O parms from BLASTER
;
.E BLASTER
.T2
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.IOB
.IOL
.SPECIAL_TEXT
This driver supports all versions of the Sound Blaster Pro and
100%%-compatible adapters.
Not recommended for use with the Sound Blaster 16 or Sound Blaster AWE32.
This is also the option to select if your card emulates the Sound
Blaster or Sound Blaster Pro, you need to make sure that the emulation
is enabled (Check your manual for details on how to do this)
WARNING: This is a 8-bit sound card and does not meet a minimum requirement
for this game. Using this card will degrade sound quality.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sb16.dig]
;
;Selected by default if BLASTER variable is of type T6
;
;Default I/O parms from BLASTER (I/O address only)
;
.E BLASTER
.T3
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.IOB
.IOA
.SPECIAL_TEXT
For high-quality digital audio with your Sound Blaster 16 or AWE32
adapter, select this driver.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[rap10.dig]
;
;Never selected by default
;
;Default I/O parms from driver
;
.ND
.IOD
.HIGH_DMA_PAIRS
.SPECIAL_TEXT
WARNING: During auto-detection of the Roland RAP-10 card, the driver
verifies that the RAP-10 is present at an I/O address of 320H or 330H.
It will NOT verify the card's DMA channel or IRQ settings. If your RAP-10
card is not configured for IRQ 9, or if DMA channels 5 and 6 are already in
use by another card on your system, you MUST select the "Skip auto-detection
and configure driver manually" option at the next menu, and enter the
correct I/O settings for your card. Otherwise, your system may lock up, or
you may experience a rapid 'chatter' effect during sound playback.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[proaudio.dig]
;
;Selected by default if CONFIG.SYS contains MVSOUND string
;
;No configuration allowed
;
.C MVSOUND.SYS
.ION
.SPECIAL_TEXT
Stereo digital audio with all versions of the Media Vision Pro Audio
Spectrum is available through the use of this driver. If you experience
problems, you should select the Sound Blaster-compatible driver instead.
The Media Vision utility MVSOUND.SYS must be loaded into memory, or
your card will not be detected.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[ultra.dig]
;
;Selected by default if environment contains ULTRASND variable
;
;Default I/O parms from driver
;
.E ULTRASND
.IOD
.SPECIAL_TEXT
When using this driver, ensure that no Gravis utilities such as SBOS,
UltraMID, or Mega-Em are active. Your UltraSound system software
should be version 2.0 or later.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[jammer.dig]
;
;Never selected by default
;
;Default I/O parms from driver
;
.ND
.IOD
.NAME
New Media Corporation WaveJammer(TM) Digital Audio
.SPECIAL_TEXT
The WaveJammer card from New Media Corporation provides high-quality
portable audio for PCMCIA-based computers. Select the Ad Lib(R) Music
Synthesizer Card driver for FM music performance with the WaveJammer.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sndscape.dig]
;
;Selected by default if environment contains SNDSCAPE variable
;
;Default I/O parms from driver
;
.E SNDSCAPE
.IOD
.NAME
Ensoniq SoundScape(TM) Digital Audio
.SPECIAL_TEXT
Select this driver if you have an Ensoniq SoundScape(TM) or compatible
audio card.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sndsys.dig]
;
;Never selected by default
;
;Default I/O parms from driver
;
.ND
.IOD
.NAME
Microsoft(R) Windows(TM) Sound System or 100% compatible
.SPECIAL_TEXT
Select this driver if your card is compatible with the Microsoft Windows
Sound System.
If DMA channel 1 is not available for use by the Windows Sound System
board, you will need to use the "Skip auto-detection and configure driver
manually" option to select another DMA channel. If you are running
Windows 95 or another Plug-n-Play system, you may need to check with the
Device Manager to see what I/O address your Windows Sound System card is
using.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[adrv688.dig]
;
;Never selected by default
;
;Default I/O parms from driver
;
.ND
.IOD
.NAME
ESS Technology ES688 Digital Audio
.SPECIAL_TEXT
This driver supports systems equipped with ESS Technology's ES688
chipset.
Compaq Presario users should select this.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[mpu401.mdi]
;
;Never selected by default
;
;Default I/O parms from driver
;
.ND
.IOD
.SPECIAL_TEXT
Most General MIDI synthesizers support the Roland MPU-401 MIDI hardware
interface standard. These include the Roland Sound Canvas, RAP-10, and
compatibles, as well as add-on daughterboards for the Sound Blaster 16
family. MPU-401 devices generally offer the highest level of performance
and sound quality available, but users of Adaptec SCSI controllers may wish
to select the "Skip auto-detection and configure driver manually" option at
the next menu to reduce the likelihood of MPU-401 detection problems.
If you have a Creative Labs AWE-32, you should select "Creative Labs
AWE-32(TM) General MIDI" instead.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[mpu401.mdi]
;
;Never selected by default
;
;Default I/O parms from driver
;
.NAME
Yamaha WaveForce(TM) DB50-XG General MIDI
.ND
.IOD
.SPECIAL_TEXT
Select this driver if your Creative Labs Sound Blaster(TM) series card is
equipped with Yamaha's General MIDI/XG daughterboard upgrade.
Users of Adaptec SCSI controllers may wish to select the "Skip
auto-detection and configure driver manually" option at the next menu
to reduce the likelihood of MPU-401 detection problems.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sndscape.mdi]
;
;Selected by default if environment contains SNDSCAPE variable
;
;Default I/O parms from driver
;
.E SNDSCAPE
.IOD
.NAME
Ensoniq SoundScape(TM) General MIDI
.SPECIAL_TEXT
Select this driver if you have an Ensoniq SoundScape(TM) or compatible
audio card.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[ultra.mdi]
;
;Selected by default if environment contains ULTRASND variable
;
;Default I/O parms from driver
;
.E ULTRASND
.IOD
.SPECIAL_TEXT
When using this driver, ensure that no Gravis utilities such as SBOS,
UltraMID, or Mega-Em are active. Your UltraSound system software
should be version 2.0 or later.
You also need to make sure that you run LOADPATS.EXE before
playing Zork Nemesis, or your MIDI will not work correctly in
the game and you may not be able to solve some of the puzzles.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sbawe32.mdi]
;
;Selected by default if AUTOEXEC contains AWEUTIL string
;
;Default I/O parms from driver
;
.A AWEUTIL
.IOD
.NAME
Creative Labs AWE-32(TM) General MIDI
.SPECIAL_TEXT
This driver offers wavetable-quality General MIDI music synthesis with the
Creative Labs AWE-32 card. The "Creative Labs Sound Blaster 16 or AWE32"
driver should be selected for digital audio.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sblaster.mdi]
;
;Selected by default if BLASTER variable is of type T1 or T3 (or no T
;specifier), and no other "clone" variable exists (ULTRASND, MVSOUND, etc.)
;
;Default I/O parms from BLASTER (A only)
;
.E BLASTER
.T1
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.IOB
.IOA
.SPECIAL_TEXT
This driver can be used with any Sound Blaster-compatible FM music
synthesizer card that does not rely on software TSRs for SoundBlaster FM
compatibility. Users of more sophisticated General MIDI-based cards should
select the Sound Blaster driver only if problems occur with the card's
General MIDI driver, as the older Sound Blaster OPL-2 chipset does not
offer the superior sound quality available with more modern devices.
WARNING: This is a 8-bit sound card and does not meet a minimum requirement
for this game. Using this card will degrade sound quality.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sbpro2.mdi]
;
;Selected by default if BLASTER variable is of type T6 or >, and AUTOEXEC does
;not contain AWEUTIL string
;
;Default I/O parms from BLASTER (A only)
;
.E BLASTER
.T3
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.NA AWEUTIL
.IOB
.IOA
.NAME
Creative Labs Sound Blaster(TM) 16
.SPECIAL_TEXT
This driver is designed for use with Sound Blaster 16 adapters which
are not equipped with General MIDI daughterboards such as the Wave
Blaster.
Although the AWE-32 can also be supported with the Sound Blaster 16
driver, AWE-32 users should select the "Creative Labs AWE-32(TM)
General MIDI" driver for optimum sound quality.
If you experience difficulty, please refer to file ZNEMHELP.TXT in Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sbpro2.mdi]
;
;Selected by default if BLASTER variable is of type T2, T4, or T5,
;no other "clone" variable exists, and inp(388) == 0x00
;
;Default I/O parms from BLASTER (A only)
;
.E BLASTER
.T2
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.IOB
.IOA
.SPECIAL_TEXT
If your Sound Blaster Pro is a "current" model equipped with the Yamaha
OPL-3 synthesizer, or if your music doesn't sound right with the other
Sound Blaster Pro driver, you should select this option.
WARNING: This is a 8-bit sound card and does not meet a minimum requirement
for this game. Using this card will degrade sound quality.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sbpro1.mdi]
;
;Selected by default if BLASTER variable is of type T2, T4, or T5,
;no other "clone" variable exists, and inp(388) == 0x06
;
;Default I/O parms from BLASTER (A only)
;
.E BLASTER
.T2
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.IOB
.IOA
.SPECIAL_TEXT
Users of early versions of the Sound Blaster Pro card can enjoy 18-voice,
2-operator FM stereo music by selecting this driver. However, most Sound
Blaster Pro cards and their compatibles, including the Sound Blaster 16, use
the more powerful OPL-3 chipset. With these later cards, you should select
the "Creative Labs Sound Blaster Pro(TM) (new version)" driver instead.
WARNING: This is a 8-bit sound card and does not meet a minimum requirement
for this game. Using this card will degrade sound quality.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[pas.mdi]
;
;Selected by default if MVSOUND exists in CONFIG.SYS, and inp(388) == 0x06
;
;No configuration allowed
;
.C MVSOUND.SYS
.ION
.SPECIAL_TEXT
Only users of the earliest Pro Audio Spectrum cards from Media Vision
should select this driver. The Media Vision utility MVSOUND.SYS
must be loaded into memory, or your card will not be detected.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[pasplus.mdi]
;
;Selected by default if MVSOUND exists in CONFIG.SYS, and inp(388) == 0x00
;
;No configuration allowed
;
.C MVSOUND.SYS
.ION
.SPECIAL_TEXT
Users of the Media Vision Pro Audio Spectrum Plus and Pro Audio Spectrum
16 cards should select this driver. The Media Vision utility MVSOUND.SYS
must be loaded into memory, or your card will not be detected.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[adlibg.mdi]
;
;Selected by default if GOLD variable exists in AUTOEXEC.BAT
;
;Default I/O parms from driver
;
.E GOLD
.IOD
.SPECIAL_TEXT
This driver supports the Ad Lib Gold Music Synthesizer card in 4-operator
FM mode.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[adlib.mdi]
;
;Never selected by default
;
;No configuration -- always at $388
;
.ND
.ION
.SPECIAL_TEXT
This driver can be used with any Ad Lib-compatible FM music
synthesizer card that does not rely on software TSRs for Ad Lib
FM compatibility. Users of more sophisticated General MIDI-based
cards should select the Ad Lib driver only if problems occur with
the card's General MIDI driver, as the older Ad Lib OPL-2 chipset
does not offer the superior sound quality available with more modern
devices.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[opl3.mdi]
;
;Never selected by default
;
;No configuration -- always at $388
;
.ND
.ION
.NAME
ESS Technology ES688 FM Audio
.SPECIAL_TEXT
This driver supports systems equipped with ESS Technology's ES688
chipset.
Compaq Presario users should select Yamaha OPL-3 for MIDI.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[esfm.mdi]
;
;Never selected by default
;
;Configuration from driver
;
.ND
.IOD
.NAME
ESS Technology ES1688, ES1788, ES1888 Enhanced FM Audio
.SPECIAL_TEXT
This driver supports systems equipped with ESS Technology's ES1688,
ES1788, or ES1888 chips. Enhanced FM music performance is available with
this driver. If problems occur, select the 'ESS Technology ES688 FM
Audio' driver instead.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[opl3.mdi]
;
;Never selected by default
;
;No configuration -- always at $388
;
.ND
.ION
.SPECIAL_TEXT
This driver is for use with all Yamaha OPL-3 based FM music synthesizers,
including those not supported by any other driver in the list.
Compaq Presario users should select this option.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[mt32mpu.mdi]
;
;Never selected by default
;
;Default I/O parms from driver
;
.ND
.IOD
.SPECIAL_TEXT
Although the Roland MT-32 is not General MIDI-compatible, it uses the
MPU-401 hardware interface standard to communicate with applications.
MT-32 owners who use Adaptec SCSI controllers may wish to select
the "Skip auto-detection and configure driver manually" option at the
next menu to reduce the likelihood of MPU-401 detection problems.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[tandy.mdi]
;
;Never selected by default
;
;No configuration allowed
;
.ND
.ION
.SPECIAL_TEXT
Tandy 1000-compatible 3-voice music support is available with this driver.
WARNING: This is a 8-bit sound card and does not meet a minimum requirement
for this game. Using this card will degrade sound quality.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[pcspkr.mdi]
;
;Never selected by default
;
;No configuration allowed
;
.ND
.ION
.SPECIAL_TEXT
WARNING
IBM PC internal speaker (1-voice) music support is available with this
driver, which offers extremely low-quality music synthesis.
If you experience difficulties, please refer to file ZNEMHELP.TXT on Disc 1.
.END_SPECIAL_TEXT