1005 Setup cannot register the application window class.
1006 Setup cannot register the billboard window class.
1007 Setup cannot register the gas gauge window classes.
1008 Microsoft Visual J++ 1.0 Setup
1009 Setup cannot read the version information in the file '%s'.
1010 Setup cannot execute the DDE command '%s'. Press Abort to to stop installing shortcuts and continue Setup.
1011 Setup cannot initialize the DDE channel with Program Manager. Setup will omit shortcuts and continue installing Visual J++.
1012 Setup cannot create the dialog box.
1013 Setup is unable to copy a file. There may not be enough disk space for all selected files. Run Setup again using another destination or install fewer components of Microsoft Visual J++.
1014 Microsoft Developer Studio is running. Setup cannot install system files or update shared files if they are in use. We recommend that you close Developer Studio before proceeding.
1015 Microsoft Visual J++ 1.0 Setup
1016 '%s' cannot be opened for reading.
1017 '%s' cannot be opened for writing.
1018 Setup cannot copy '%s' to '%s'.
1019 Setup cannot remove '%s'.
1020 Setup cannot rename '%s' to '%s'.
1021 Internal and external file lists do not match.\n Found: '%s'.\n Expected: '%s'.
1022 Setup cannot initialize the file list.
1023 Microsoft Visual J++ Setup failed to start the DAO setup program. \nYou may try again using the DAO setup program that is located in the daosdk\disk1 directory of your Microsoft Visual J++ CD-ROM after Microsoft Visual J++ Setup is complete.
1025 Setup cannot access the source file '%s'.
1026 Setup cannot open the source file '%s'.
1027 Setup cannot open the destination file '%s'. The file may be in use by another application, or marked read-only. Close the application or change the file's read-only attribute and try again.
1028 Setup cannot seek in the destination file '%s'.
1029 Setup cannot read from the source file '%s'.
1030 Setup cannot write to the destination file '%s'.
1031 CRC checking failed. "%s" was not copied correctly to "%s". If you choose ignore, you can try to manually copy this file later(Be sure to note the file's source and proposed destination directories). See the PSS Help File for additional troubleshooting tips.
1032 Cannot start WinHelp. You will not be able to access Help
1033 Setup has detected an installation of Microsoft Developer Studio. To avoid unpredictable behavior, we recommend that you install to the %s directory for all products that use Developer Studio. Do you want to use the recommended directory?
1036 Please insert diskette #%d in drive %c:. Choose OK when the disk has been inserted. Choose Cancel to quit Setup.
1037 Microsoft Visual J++"!
1038 Microsoft Visual J++(TM)
1042 You must provide a valid drive.
1043 You must provide a valid drive and path.
1044 You must provide a valid user name. The name must contain at least one alphabetic character.
1045 You must provide a valid organization name. The name must contain at least one alphabetic character.
1047 Setup cannot properly install Microsoft Visual J++ under Win32s. Please restart Setup under Windows 95 or Windows NT 4.0 or greater.
1055 Your system does not have a VGA-resolution monitor. Microsoft Visual J++ requires VGA or better for optimal performance. Some components of Microsoft Visual J++ may run with reduced performance or not at all.
1056 You must check an option in the 'Library Types' group if you check an option in the 'Library Targets' group.
1058 You must check an option in the 'Library Targets' group if you check an option in the 'Library Types' group.
1060 Setup has saved a modified version of TOOLS.INI as '%s'. You should integrate these changes into your TOOLS.INI file.
1061 Setup detects that you are not a member of the Administrators or Power Users group, which is required for installing ODBC, OLE RPC debugging, and Just-In-Time debugging. Continue?
1062 F1 Help is not available
1063 No options were selected. Please select the portions of Microsoft Visual J++ you want to install, or choose Exit to quit Setup.
1065 No more system timers are available. Try closing some applications and then running Setup again.
1066 Not all files were copied (i.e., you chose to ignore installation failures). You may encounter problems running Microsoft Visual J++ because of these missing files. You should reinstall Microsoft Visual J++ if you have problems associated with these files.
1067 The Setup process is not complete. If you quit Setup now, Microsoft Visual J++ will not be properly installed. Are you sure that you want to quit Setup?
1069 There is a previous installation of Visual J++ in '%s'. Continue?
1070 MFC Migration Kit setup from CD-ROM
1071 A previous instance of Setup is running. Only one copy of Setup can be run at a time.
1072 The directory pointed to by your INIT environment variable does not exist. Do you want Setup to create the directory and place the new TOOLS.INI file in the directory?
1073 Setup cannot read the INIT variable from the Registry. Setup cannot create the TOOLS.INI file.
1074 Setup cannot write to the Registry.
1079 Setup has created a new TOOLS.INI file as '%s'. VCVARS32.BAT will set the INIT variable to point to this path.
1080 Setup has created a new TOOLS.INI file as '%s'.
1081 Setup has made the necessary changes to your TOOLS.INI file and saved the previous version of the file as '%s'.
1082 Setup usage:\nSetup [/F /L /O /P /R]\n /F do not copy Files\n /L Log file copies\n /O make no configuration changes\n /P make no Program Manager changes\n /R do not register DLLs and OLEcontrols
1085 File Copy Progress
1086 Source file:
1087 Destination file:
1088 Microsoft Visual J++ 1.0
1090 This is an unauthorized
1091 The installation directory is not writeable. Please select a different drive or directory.
1093 MSVCSRC20
1094 Are you sure that you want to overwrite the newer version of '%s' %s with the older version of %s?
1095 OK
1096 Register Visual J++
1097 Microsoft Visual J++ Setup cannot start the Registration Wizard. Please fill out and return the registration card that came with the product.
1101 Microsoft Developer Studio
1102 Spy++
1103 MFC Tracer
1104 PView
1105 WinDiff
1106 NT System Symbols Setup
1110 Microsoft Developer Roadmap
1114 Knowledge Base
1115 Technical Support
1116 MFC 4.0 Source Setup
1117 Release Notes
1118 Documentation Errata
1120 OLE 2.0 Toolkit
1121 MFC Samples on CD-ROM
1124 OLE 2.0 Samples on CD-ROM
1134 Do you want to delete HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\AeDebug so that Just-In-Time debugging can be properly setup?
1142 Setup cannot install ODBC. You may try again using the ODBC Administrator after quitting Setup.
1143 Setup cannot install DAO components. \nYou may try again using the DAO setup program that is located in the daosdk\disk1 directory of your Microsoft Visual J++ CD-ROM after Microsoft Visual J++ Setup is complete.
1144 Setup detects that your system is MIPS-based. This version of Microsoft Visual J++ requires an x86-based system.
1146 Visual J++ is running. Setup cannot install 'CTL3D32.DLL' while it is in use, and it is required for ODBC Driver Manager installation. Close Visual J++ before proceeding.
1148 Setup detects that Microsoft Visual J++ is still open, so the ODBC Driver Manager and selected drivers will not be installed.
1157 Microsoft Visual J++ 1.0 requires Windows 95 or Windows NT 4.0 or greater. Setup cannot continue.
1159 Setup has made the necessary changes to your TOOLS.INI file.
1160 Setup cannot load the ODBC Installer DLL.
1164 There is insufficient disk space on your installation drive (%c:) for the selected files. Do you want to continue?
1166 There is insufficient disk space on your Windows drive (%c:) for the selected files. Do you want to continue?
1170 &Spy++
1171 &Spy++
1172 &MFC Tracer
1173 &MFC Tracer
1174 Cannot open WIN32S.TXT
1175 When you have completed using the On-Line Registration Wizard you need to restart Windows in order to complete the installation.
1176 You need to restart Windows in order to complete the installation.
1177 You will need to restart Windows in order for Microsoft Visual J++ to work properly.
1178 Unable to Restart Windows. You will need to close all programs and restart Windows manually.
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 Unable to process the user's request.
61588 Linked %s
61589 Unknown Type
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Cannot start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61829 %1\nUnable to register document.\nThe document may already be open.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
61877 %1 has a bad format.
61878 %1 contained an unexpected object.
61879 %1 contains an incorrect schema.
61880 &Next >
61881 < &Back
61882 Regis&ter Control
61883 &Unregister Control
61885 OL&E Control Test Container
61886 Uninstall Visual J++
61887 OLE Object &View
61888 You have entered an invalid CD Key. Please enter the CD Key printed on the yellow sticker of your CD liner notes or CD sleeve.
61889 Setup has detected existing components with the same version but using a different language than the component you are trying to install. Do you want to replace existing components with components using a different language?
61890 Help Workshop
61891 Database Options
61892 Microsoft ODBC Drivers
61893 Microsoft Data Access Objects
61894 Uninstall Visual J++ 1.0
62001 Internet Explorer could not be installed.\n\nThe file "%s" could not be found on the path "%s".
62002 Register Java &Applet
62003 Create &GUID
62004 An error occurred while installing the Java Class Source Files.\n\nTo install the source files, "%s" must be found on the path "%s".\nAnd "%s" must be found on the path "%s".
62005 An error occurred while installing the Java Class Source Files.\n\nUnable to launch "%s" from the path "%s".
62006 Visual J++ requires the installation of\nInternet Explorer 3.0 with Java support.\n\nSetup will now install Internet Explorer 3.0.
62007 Java Class Library Source Code
62008 An error occurred while installing the Java Class Source Files.\n\nThe unzip process timed out.
62009 An error occurred while copying the file "%s" to "%s".
62010 Microsoft Developer Studio is not currently your\ndefault application for viewing Java source files.\nWould you like to make it your default?
62011 J&ava Type Library Wizard
62012 Visual J++ requires the installation of\nJava support in Internet Explorer.\n\nSetup will now install Java support.
