16005 %1\n\nNone of the configurations can be dependencies of this configuration.
16006 No Matching Configuration
16007 Project Configuration...
16008 %1\n\nRemove this project?
16009 Cannot create subproject.
16010 Project...
16011 files
16012 The makefile name or some other command line may be specified in\nthe Project Settings dialog. Would you like to go there now?
16013 The custom build setting requires an output file
16016 This project's makefile has read-only attributes. You will not be able to save your changes to this project.
16017 %s\n\nThis project was generated by a previous version of Visual C++. Continuing will convert it to a Developer Studio workspace.
16018 Warning: dependent file "%s" does not exist
16019 Invalid name for a configuration.
16020 <invalid name>
16021 As part of the build process, the remote target will be updated. This action requires the remote executable filename.
16022 Updating dependencies
16023 Done updating dependencies.
16024 Project
16025 No primary platforms are available.\nThe build system will be disabled. It is likely that a build system 'add-on' platform (.pkg), installed by Setup, failed to load.
16026 Add
16027 The executable file %s is recognized as belonging to a platform that has not been installed as an 'add-on' DLL by Setup.\nYou will not be able to debug this executable.
16028 The source files "%s" and "%s" are both configured to produce the output file "%s".\nThe project cannot be built.
16030 Source Files
16031 %s No. %i
16032 No.
16033 Error opening file %s to scan dependencies: %s
16034 Error scanning file %s for dependencies.
16035 %s(%d): Could not find the file %s
16036 The makefile %s has been modified and cannot be used as an internal project workspace.
16037 The file could not be opened as a project workspace.
16038 You can specify a configuration when running NMAKE on this makefile
16039 by defining the macro CFG on the command line. For example:
16040 NMAKE /f "%s" CFG="%s"
16041 Possible choices for configuration are:
16042 "%s" (based on "%s")
16043 An invalid configuration is specified.
16044 Microsoft Developer Studio Generated NMAKE File, Format Version
16045 %s\n\nThis makefile was not generated by Developer Studio.\n\nContinuing will create a new Developer Studio workspace to wrap this makefile. You will be prompted to save after the new workspace has been created.\n\nAre you sure you want to continue?
16046 This makefile refers to an unknown project type "%s" for the configuration"%s."
16047 The old project configuration file for this project specified a project configuration"%s" which no longer exists. The configuration will be set to"%s."
16048 Deleting output files for rebuild.
16049 Error: Could not delete file "%s" %s
16050 The project settings have changed since the last build. Would you like to rebuild the affected files?
16051 %s\n\nThis directory does not exist.\nAdd the directory anyway?
16052 Illegal directory specification
16053 %s - %i error(s), %i warning(s)
16054 C/C++
16055 Link
16056 Resources
16057 Not Using MFC
16058 Use MFC in a Static Library
16059 Use MFC in a Shared Dll (mfc42(d).dll)
16060 Invalid configuration "$(CFG)" specified.
16061 Tools
16062 Dependencies
16063 Resources
16064 Group
16065 Only a single %s file may be marked as included in the build. Mark %s as included in the build and exclude the other %s file(s)?
16066 Inputs
16067 Outputs
16068 Multiple %s files exist in this project. Only one can be marked as included in the build. The others will be excluded from the build.
16069 Browse Info
16070 You must select at least one platform that your external makefile supports.
16071 Library
16072 Compiling...
16073 Compiling resources...
16074 Linking...
16075 Creating browse info file...
16076 Creating library...
16077 Unable to save workspace-specific state information.
16078 &Update Remote Output File
16079 Build target not copied to remote machine during a batch build
16080 Cannot open the '%s' resource script for the project.
16081 "$(CFG)" == ""
16082 Source Files
16083 CFG
16084 You cannot build with a workspace that has never been saved and does not have a filename. Please save the workspace before building.
16085 You cannot close a workspace while a build is in progress. Select the Stop Build command before closing.
16086 The main project folder cannot be deleted.
16087 There is no source file to build
16088 Build : warning : could not create output directory '%s'\n
16089 &Build Browse Info File
16090 Tool execution canceled by user.
16091 Some of the input files that the %s tool uses do not exist. Would you like to do a full build instead?
16092 ** DO NOT EDIT **
16093 &Options:
16094 Microsoft Visual C++ Generated NMAKE File, Format Version
16095 Customize
16096 Custom Build
16097 Performing Custom Build Step
16098 Bsc Maker
16099 MkTypLib
16100 Win32 Rc Compiler
16101 Listing Files
16102 Preprocessor
16103 Deleting intermediate project files for '%s'.
16104 Copy
16105 You cannot open a workspace while a build is in progress. Select the Stop Build command before opening.
16106 Executable files
16107 %s\n\nThis file is generated by an existing target, do you wish to add a reference to this target instead of the actual file?
16108 Library files
16109 %s\n\nThis file type cannot be added to the project.
16110 Debug and Run-Time
16111 Input
16112 Optimizations
16113 Include files
16114 Dependency groups and dependency files cannot be deleted directly.
16115 Precompiled Headers
16116 C++ Language
16117 Customize
16119 Warning: Could not get path for temporary files. Current directory will be used instead.
16120 Error: Could not create temporary files path from current directory. Temporary files cannot be created.
16121 Error: Could not get temporary file name.
16122 Error opening temporary file:
16123 Error deleting temporary file:
16124 Error: Could not generate command line for the %s tool.
16125 A build is in progress. This build will not be affected by changes in the directory settings.
16126 Error saving workspace.
16127 Taking snapshot of workspace.
16128 Loading workspace state.
16129 Saving workspace state.
16130 No configuration specified. Defaulting to %s.
16131 The selection contained files which are already present in the specified project.
16132 %s\n\nThis file does not exist. Do you want a reference added to the project anyway?
16133 %s\n\nThe external makefile already has this name, you should supply a different name for the project workspace that wraps the external makefile.
16138 Do you want to close all document windows?
16139 Output
16140 Directories
16141 Debug
16142
16143 &Compile %s
16144 &Build %s
16145 Preload
16146 Debug
16147 Additional DLLs
16148 Group name cannot be blank.
16149 This build command requires an active workspace. Would you like to create a default project workspace?
16150 %s\n\nA workspace with this name already exists. Continuing with this operation will overwrite that workspace. Are you sure you want to continue?
16151 Object/Library Files
16152 Reading project file
16153 Writing project file
16154 %s\n\nThis file is not included in the project. Would you like to add it?
16155 %s\n\nCannot update dependencies for this file because it is not part of the project.
16156 %s\n\nCannot compile this file because it is not part of the project.
16157 Local Name
16158 Default settings
16159 Remote Name
16160 Project settings
16162 DLLs (*.dll)
16163 Project configuration name cannot be blank.
16164 Invalid destination for %s\nOutput destination cannot be a directory.
16165 Please clarify destination for %s\nDoes this output destination specify a directory?
16166 Files cannot be dropped onto the workspace window during a build.
16167 Invalid destination for %s\nThe output file must have the extension '%s'.
16168 Invalid destination for %s\nThe output destination '%s' is not a valid path.
16169 Source Browse Info Files
16170 Resource File
16171 Browse Info File
16172 Target File
16173 Mapfile
16174 MSVCINCL.DAT
16176 SYSINCL*.*
16177 Are you sure you want to reset the settings of the selected items? This will restore the settings used when the items were created.
16178 Cannot compile the file '%s'; no compile tool is associated with the file extension.
16179 Do you want to save state information for %s?
16180 Multiple Windows definition (.DEF) files have been specified for this project. '%s' exists in the current project, and '/DEF:%s' exists in the current linker settings.\nThe file specified by '/DEF:' will be used for the build.\nContinue?
16182 Format of hex number '%s' is not correct. It may only contain characters 0-9 and A-F (a-f). A '0x' prefix is optional. The maximum allowed hex number is 0xFFFFFFFF.
16183 Format of decimal number '%s' is not correct. It may only contain characters 0-9. It must be positive, the '+' prefix is optional. The maximum allowed decimal number is 4,294,967,295.
16184 Format of octal number '%s' is not correct. It may contain characters 0-7. A '0c' prefix is optional. The maximum allowed octal number is 0c37777777777.
16194 Do you want to continue building the remaining configurations?
16195 None
16196 Level 1 *
16197 Level 2
16198 Level 3
16199 Level 4
16200 Default
16201 Disable (Debug)
16202 Maximize Speed
16203 Minimize Size
16204 Customize
16205 None
16206 Line Numbers Only
16207 C7 Compatible
16208 Program Database
16209 No Listing
16210 Assembly-Only Listing
16211 Assembly, Machine Code, and Source
16212 Assembly with Machine Code
16213 Assembly with Source Code
16214 BuildError
16215 Build Error
16216 BuildWarning
16217 Build Warning
16218 BuildComplete
16219 Build Complete
16220 BuildUpToDate
16221 Build Up To Date
16224 Disable *
16225 Only __inline
16226 Any Suitable
16227 Assume No Aliasing
16228 Assume Aliasing Across Function Calls
16229 Global Optimizations
16230 Generate Intrinsic Functions
16231 Improve Float Consistency
16232 Favor Small Code
16233 Favor Fast Code
16234 Frame-Pointer Omission
16235 Full Optimization
16236 Best-Case Always *
16237 General-Purpose Always
16238 Point to Any Class *
16239 Point to Single- and Multiple-Inheritance Classes
16240 Point to Single-Inheritance Classes
16241 Error opening makefile for save.
16243 Perform_If_Able
16244 Common
16245 Internal
16246 Executable Path
16247 Menu Text
16248 Deferred
16249 Class Wizard Info File
16250 &Settings For:
16251 This workspace contains projects that may require the Microsoft Foundation classes to build successfully. These have not yet been installed. Please re-run Setup to install these classes.\nWould you like to open the workspace anyway?
16252 Current TL
16253 This workspace does not contain any project configurations whose platforms are supported by this installation of Developer Studio. You will need to create a new supported configuration before you will be able to build, run or debug your project.
16254 This workspace contains project configurations whose platforms are not supported by this installation of Developer Studio. You will not be able to build, run, debug or modify these configurations.
16255 Project file %s does not exist.\nDo you want to create a new file?
16256 File %s cannot be created.
16257 A file may only be open by on editor at a time. This makefile is already open as a project workspace.
16258 In order to debug remotely or update the remote target, the remote executable filename is required.
16259 Please specify the executable file for the debug session.
16260 Please specify the executable file.
16261 The remote target "%s" is invalid.\nPartial pathnames are not allowed.
16262 The remote target "%s" is invalid.\nPlease include a volume name.
16263 Linking...
16265 Transports
16266 Error getting status of file "%s": %s
16267 Error getting status of file "%s": %i
16269 Debugging
16270 There are no available projects than can be added as dependencies.
16271 Input_Spec.
16275 Output_Spec.
16276 Performing
16277 The file does not exist.
16278 The source file does not exist.
16279 The output file does not exist.
16280 Inheritance description not available.
16282 \n (Not Supported)
16283 Error spawning %*.*s
16284 %*.*s terminated at user request.
16285 Error executing %*.*s.
16286 Command line is too long (tool does not support response files).
16287 Browser Database Maker
16288 Library Manager
16289 COFF Linker
16290 OLE Type Library Maker
16291 Win32 Resource Compiler
16292 TL Attributes
16293 TL Description
16294 Execution Models (non-native)
16295 Expression Evaluators
16296 Execution Models
16297 NM Attributes
16298 Current EE
16299 Current EM
16300 Current SH
16301 Symbol Handlers
16302 The input file does not exist.
16303 Build %s
16304 Compile %s
16305 Settings...
16306 Project Settings
16308 , and
16309 , and not
16310 replaces
16311 Previous Folder
16312 Project
16313 Source File
16314 Header File
16315 The selection contained one or more duplicate files. Properties from the first instance of each file will be used.
16316 Insert Project Files
16317 Add Group
16318 Drop
16319 Insert Files into Project
16329 Makefile
16330 A project configuration already exists with this name.
16331 %s\n\nThis file is read-only.\nYour changes will not be saved.
16385 %s.\nThe file could not be opened as a project file.\nThe local path is invalid
16388 Custom Build
16390 Build : warning : failed to (or don't know how to) build '%s'\n
16398 The file does not exist.
16405 <multiple selection>
16416 &Create...
16417 &Create
16418 %1 already exists. Do you want to replace it?
16419 Can't write to %1
16420 Please select at least one platform for your project.
16421 Intermediate object directories can not be created under this long path. Please choose a shorter path.
16422 Error creating a new subdirectory with the project name.
16423 A file already exists with the same name as your new project name.
16424 You do not have proper access to create the new subdirectory.
16425 Invalid name for new subdirectory.
16426 Invalid name for new project.
16427 Error changing to directory %1.
16428 Invalid workspace name.
16429 Directory already specified.
16430 Please select less files and try again.
16466 NULL
16467 nul
16468 Workspace location doesn't exist. Do you want to create it?
16469 Cannot open file.
16470 Win32 (MIPS)
16471 Win32 (x86)
16472 Macintosh
16473 Win32
16474 Macintosh (PowerPC)
16475 A project already exists with this name.
16476 The workspace file
16477 %s\nWorkspace File not Found. Unable to open workspace.
16478 You can speed up your builds by disabling compiled browse information, and using Developer Studio's "no-compile" browser. Do you want to disable compiled browse information?
16479 \n\nIf you want to continue to use the old project, be sure to save the new one under a different name. You will be prompted to save after the conversion. \n\nAre you sure you want to convert?
