1166 Intended display's active region (this can be smaller or larger than the encoded frame size.
1167 Specify variable length coding tables used for intra coded blocks.
1168 Specify whether to restrict motion compensation to frame prediction and DCT to frame DCT.
1169 Specify quantization scale type.
1170 Specify entropy scanning patterns defining the order in which quantized DCT coefficients are run-length coded.
1171 Modify the behavior of the rate control scheme. Set them to 0 to have the encoder compute default values.
1172 Initial frame global complexity measure.
1173 Initial frame virtual buffer fullness.
1174 Specify the motion estimation vectors.
1175 Specify the motion vectors for P frames.
1176 Specfiy the motion vectors for the B frames.
1177 Specify the motion vectors for B frame 1.
1178 Specify the motion vectors for B frame 2.
1179 Specify the motion vectors for B frame 3.
1180 Specify the motion vectors for B frame 4.
1181 Specify the motion vectors for B frame 5.
1182 Specify the motion vectors for B frame 6.
1183 Specify the motion vectors for B frame 7.
1184 Specify the size (in Kb) of the bitstream input buffer required for the sequence to be decoded without underflows or overflows.
1185 Specify whether the encoder computes a VBV delay (0) or if a fixed value of 0xFFFF is encoded (1).
1186 Specify the active region's horizontal size.
1187 Specify the active region's vertical size.
1188 Specify whether the sequence contains interlaced and/or progressive video (0) or only progressive video (1).
1189 Specify the intra DC precision, 0 = 8 bits, 1 = 9 bits, 2 = 10 bits, 3 = 11 bits (high profile only), 9, 10, and 11 are MPEG-2 only.
1190 Specify the video format flag (MPEG-2 only), 0 = composite, 1 = PAL, 2 = NTSC, 3 = SECAM, 4 = MAC, 5 = unspecified. This value is just a flag in the video bitstream, it does not affect the video encoding or decoding processes.
1191 Specify whether to use VLC table 0 (0) or VLC table 1 (1) for intra coded blocks in I frames.
1192 Specify whether to use VLC table 0 (0) or VLC table 1 (1) for intra coded blocks in P frames.
1193 Specify whether to use VLC table 0 (0) or VLC table 1 (1) for intra coded blocks in B frames.
1194 Specify whether to restrict (1) motion compensation to frame prediction and DCT to frame DCT in I frames.
1195 Specify whether to restrict (1) motion compensation to frame prediction and DCT to frame DCT in P frames.
1196 Specify whether to restrict (1) motion compensation to frame prediction and DCT to frame DCT in B frames.
1197 Specify linear (0) or non-linear (1) quantization scale type for I frames.
1198 Specify linear (0) or non-linear (1) quantization scale type for P frames.
1199 Specify linear (0) or non-linear (1) quantization scale type for B frames.
1200 Specify Zig-Zag Scan (0) or Alternate Scan (1) entropy scanning in I frames.
1201 Specify Zig-Zag Scan (0) or Alternate Scan (1) entropy scanning in P frames.
1202 Specify Zig-Zag Scan (0) or Alternate Scan (1) entropy scanning in B frames.
1203 Specify whether to write (1) Sequence Display Extensions in video stream or not (0).
1204 Specify whether to write (1) a Sequence End Code in video stream or not (0).
1205 Specify whether to embed SVCD user data blocks in the video stream (1) or not (0).
1206 Specify rate control Reaction Parameter, set to 0 to have encoder compute value.
1207 Specify the Initial Average Activity, set to 0 to have encoder compute value.
1208 Specify the Initial Global Complexity Measure for I frames, set to 0 to have encoder compute value.
1209 Specify the Initial Global Complexity Measure for P frames, set to 0 to have encoder compute value.
1210 Specify the Initial Global Complexity Measure for B frames, set to 0 to have encoder compute value.
1211 Specify the Initial Virtual Buffer Fullness for I frames, set to 0 to have encoder compute value.
1212 Specify the Initial Virtual Buffer Fullness for P frames, set to 0 to have encoder compute value.
1213 Specify the Initial Virtual Buffer Fullness for B frames, set to 0 to have encoder compute value.
1214 Specify that zero padding will occur if the actual frame size is less than this percentage of the target frame size.
1215 Specify what percentage of the target frame size to zero fill.
1216 Specify forward (P and B frames) and backward (B frames) search windows for motion estimation.
1217 -Custom Settings-
1218 Open a settings file
1219 INI Files (*.INI)|*.ini|All Files (*.*)|*.*|
1220 Save settings to a file
1221 Unable to save settings to file
1222 Settings saved to file
1223 Fast
1224 Mode 1
1225 Mode 128
1226 Variable bitrate
1227 Constant bitrate
1228 23.976 fps - NTSC film rate
1229 24 fps - Standard film rate
1230 25 fps - PAL/SECAM, generic 625/50Hz rate
1231 29.97 fps - NTSC, non drop-frame rate
1232 30 fps - non drop-frame rate
1233 50 fps - Noninterlaced PAL/SECAM/625 rate
1234 59.94 fps - Noninterlaced NTSC/525 rate
1235 60 fps - Noninterlaced NTSC non drop-frame rate
1236 1.0000 - Square Pels
1237 0.6735
1238 0.7031 - 16:9 625 lines
1239 0.7615
1240 0.8055
1241 0.8437 - 16:9 525 lines
1242 0.8935
1243 0.9157 - CCIR601 625 lines (PAL)
1244 0.9815
1245 1.0255
1246 1.0695
1247 1.0950 - CCIR601 525 lines (NTSC)
1248 1.1575
1249 1.2015
1250 Square Pels
1251 4:3 Display
1252 16:9 Display
1253 2.21:1 Display
1254 The horizontal frame size must be in the range 32 .. %d.
1255 The vertical frame size must be in the range 32 .. %d.
1256 Video bit rate must be greater than %d kbps, setting to %d kbps.
1257 Video bit rate greater than maximum, setting to maximum.
1258 Max video bit rate greater than allowed maximum, setting to maximum.
1259 Min video bit rate lower than allowed minimum, setting to minimum.
1260 Min video bit rate greater than specified maximum, setting to maximum.
1261 Avg video bit rate less than the specified minimum, setting to minimum.
1262 Avg video bit rate greater than specified maximum, setting to maximum.
1263 Fastest
1264 Mode A
1265 Mode B
1266 Mode C
1267 Rigorous
1268 Not applicable
1269 High Profile
1270 Main Profile
1271 Simple Profile
1272 ITU-R Rec. 709 (1990)
1273 unspecified
1274 ITU-R Rec. 624-4 System M
1275 ITU-R Rec. 624-4 System B, G
1276 SMPTE 170M
1277 SMPTE 240M (1987)
1278 ITU-R Rec. 709 (1990)
1279 unspecified
1280 ITU-R Rec. 624-4 System M
1281 ITU-R Rec. 624-4 System B, G
1282 SMPTE 170M
1283 SMPTE 240M (1987)
1284 linear transfer characteristics
1285 ITU-R Rec. 709 (1990)
1286 unspecified
1287 FCC
1288 ITU-R Rec. 624-4 System B, G
1289 SMPTE 170M
1290 SMPTE 240M (1987)
1291 Off
1292 General
1293 VBV Buffer Size
1294 Force VBV Delay
1295 Display Size
1296 Horizontal
1297 Vertical
1298 Progressive Sequence
1299 Intra DC Precision
1300 Video Format
1301 Intra VLC Format
1302 I Frame
1303 P Frame
1304 B Frame
1305 Use Frame Prediction and Frame DCT
1306 Quantization Scale Type
1307 Use Alternate Scanning Pattern
1308 Enable Sequence Display Extensions
1309 Sequence End Code
1310 Embed SVCD User Blocks
1311 Rate Control
1312 Reaction Parameter
1313 Initial Average Activity
1314 Initial Global Complexity Measure
1315 Initial Virtual Buffer Fullness
1316 Minimum Frame Percentage
1317 Pad Frame Percentage
1318 Motion Estimation
1319 P Frame Motion Vectors
1320 Forward Search Width
1321 Forward Search Height
1322 B Frame Motion Vectors
1323 B Frame %d
1324 Backward Search Width
1325 Backward Search Height
1326 Entry must be in the range %d .. %d.
1327 High Level
1328 High 1440 Level
1329 Main Level
1330 Low Level
1331 MPEG Layer 1
1332 MPEG Layer 2
1333 None
1334 free format
1335 All frames
1336 I and P frames
1337 I frames
1338 Invalid split size, resetting to original.
1339 Entry must be in the range 0 .. 2147483647.
1340 Unable to create a parent window for the advanced settings dialogs.
1341 Unable to create the advanced settings dialogs.
1342 Unable to read from settings file
1344 Preset: Custom Settings
1345 Preset: %s
1346 Video settings:
1347 frame size: %d x %d
1348 frame rate: %.3f
1349 (29.97 fps with 3:2 pulldown)
1350 (30.0 fps with 3:2 pulldown)
1351 (29.97 fps with 2:3 pulldown)
1352 (30.0 fps with 2:3 pulldown)
1353 aspect ratio:
1354 bitrate: constant, %.2f Mbps
1355 bitrate: variable, avg %.2f, max %.2f
1356 bitrate: variable, max %.2f, constant quality %d
1357 Error: %s.
1358 Warning: %s.
1359 Video: none
1360 Audio settings (MPEG):
1361 layer: %d
1362 bitrate: %d kbps
1363 frequency: %.1f kHz
1364 mode:
1365 stereo
1366 joint stereo
1367 dual channel
1368 mono
1369 CRC: on
1370 CRC: off
1371 Audio settings (PCM):
1372 Audio: none
1373 Multiplexer settings:
1374 program stream type:
1375 bitrate: constant, %.2f Mbps
1376 bitrate: variable, %.2f Mbps maximum
1377 bitrate: constant, computed
1378 bitrate: variable, computed maximum
1379 max file size: %d MB
1380 max file size: off
1381 Multiplexing: none
1383 video stream type:
1384 MPEG-1
1385 VCD
1386 MPEG-2
1387 SVCD
1388 DVD
1389 TS
1390 NTSC
1391 PAL
1392 PCM
1393 29.97 fps - NTSC, drop-frame rate
1395 frame rate: 29.970 (drop frame)
1396 .ini
1397 *.ini
1398 ini
1399 .
1400 I
1401 B
1402 P
1403 ...
1404 IIIIIIIIIIIIIII ...
1405 ,
1406 .mpg
1407 .m2v
1408 .m1v
1409 .mpa
1410 .wav
1411 \
1412 -
1413 frame rate: 29.970 (non drop frame)
1414 DVD NTSC 4x3 High Bitrate
1415 DVD NTSC 4x3 Medium Bitrate
1416 DVD NTSC 4x3 Low Bitrate
1417 DVD NTSC 16x9 High Bitrate
1418 DVD NTSC 16x9 Medium Bitrate
1419 DVD NTSC 16x9 Low Bitrate
1420 SVCD NTSC High Bitrate CBR
1421 SVCD NTSC Standard Bitrate
1422 VCD NTSC Standard Bitrate
1423 DVD PAL 4x3 High Bitrate
1424 DVD PAL 4x3 Medium Bitrate
1425 DVD PAL 4x3 Low Bitrate
1426 DVD PAL 16x9 High Bitrate
1427 DVD PAL 16x9 Medium Bitrate
1428 DVD PAL 16x9 Low Bitrate
1429 SVCD PAL High Bitrate CBR
1430 SVCD PAL Standard Bitrate
1431 VCD PAL Standard Bitrate
1435 The DVD horizontal frame size must be 720, 704 or 352.
1436 The NTSC DVD vertical frame size must be 480 or 240.
1437 The PAL DVD vertical frame size must be 576 or 288.
1438 The DVD horizontal frame size must be 352 when the vertical frame size is %d.
1571 &Noise reduction:
1572 &Noise sensitivity:
1573 Specify the chroma format of the encoded frames, 4:2:0 (0) or 4:2:2 (1).
1574 Specify the Color Primaries of the source video, 0 = ITU-R BT.709, 1 = unspecified, 2 = ITU-R BT.470-2 System M, 3 = ITU-R BT.470-2 System B, G, 4 = SMPTE 170M, 5 = SMPTE 240M.
1582 Specify the Transfer Characteristics of the source video, 0 = ITU-R BT.709, 1 = unspecified, 2 = ITU-R BT.470-2 System M, 3 = ITU-R BT.470-2 System B, G, 4 = SMPTE 170M, 5 = SMPTE 240M, 6 = linear transfer characteristics.
1583 Specify the Matrix Coefficients of the source video, 0 = ITU-R BT.709, 1 = unspecified, 2 = FCC, 3 = ITU-R BT.470-2 System B, G, 4 = SMPTE 170M, 5 = SMPTE 240M.
1584 Sequence Header
1585 Sequence Extension
1586 Sequence Display Extension
1587 Picture Header
1588 Picture Coding Extension
1589 Color Primaries
1590 Transfer Characteristics
1591 Matrix Coefficients
1592 Auto
1593 3:2
1594 2:3
1595 Basic Settings
1596 Video Settings
1597 Advanced Video Settings
1598 Audio Settings
1599 Multiplexer Settings
1600 Invalid Settings
1601 estimated size: %u MB
1602 Disabled
1603 Enabled
1605 Copy to clipboard
1606 Unable to write value %d to key '%s', section '%s' in file %s.
