100 OLE initialization failed. Make sure that the OLE libraries are the correct version.
102 Feeder Exists
106 Flat Bed Exists
107 Available Color changes with ADF
108 Available Res changes with Color
109 Flat Bed Optical Res
110 Feeder Optical Res
111 Optical Resolution
112 Bed Width
113 Bed Height
114 Feeder Max Width
115 Feeder Max Height
116 On
117 Off
118 % Complete
215 All files are listed...
220 You must enable a valid scanning surface.\n\nPlease enable the Flat Bed or the Feeder, depending on your Scanner Hardware
221 Resulting Grade
222 Failure
223 Satisfactory
224 Excellent
379 Crop\nCrop
380 Failed: %s %s\n\nIn order to use CorelSCAN with this Twain Driver, you must scan with the Vendor User Interface.
381 Get Supported
382 Set Current
383 Get Current
384 Pixel Type
385 Resolution
386 Image Layout
387 Bit Depth
388 The compatibility test for the Twain Driver was successful. CorelSCAN has detected the following attributes for your scanner. Any attribute that appears in black can be changed if it is incorrect. Right-click the attribute's value to choose a new one from a menu, or click it until the cursor appears at the end of the value to type over it.
389 CorelSCAN has detected a serious problem with a previous test using this device.\n\nDo you wish to try the test again?
390 CorelSCAN will test the Twain Driver you have selected. This determines whether or not CorelSCAN can be used to choose the scanning options. This test is only necessary the first time you use CorelSCAN with a specific Twain Driver. If the test is not completed, restart CorelSCAN to resume.
391 CorelSCAN is about to begin a scan compatibility test for the TWAIN driver you have selected. Omitting this test may result in problems in the future.\n\nDo you wish to proceed?
392 Cover Color
393 Black
394 White
395 Did the user interface from your Twain Driver appear?
396 Compatibility Test Progress
397 Testing: %s
398 In order to use CorelSCAN with this Twain Driver, you must scan with the Vendor User Interface.
399 Scan Test
400 Scan
401 Physical Size
402 Native Resolution
403 Feeder
404 Cancel Operation... Please wait...
432 Please choose a setting name other than the default.
434 The image you have selected has a different number of colors than others in your list. Processing options will be limited by the lowest quality image.\n\nAdd this file anyway?
20785 Unknown box
28682 Default Setting
28707 Do you wish to:
28737 Do you really wish to quit CorelSCAN ?
28799 Black and white (1-bit)
28800 Grayscale (8-bit)
28801 Paletted
28802 RGB (24-bit)
28803 LAB (24-bit)
28804 CMYK (32-bit)
28805 Deskew
28806 Background Pattern Removal
28807 Moire Removal
28808 Dust and Scratch Removal
28809 Noise Removal
28810 Tonal Correction
28811 Brightness, Contrast, Intensity
28812 Red-eye Removal
28814 Image Enhancement
28815 After
28827 Deskews the image or Rotates it to a chosen angle.
28828 Removes background pattern from the image.
28829 Removes moire from the image.
28830 Removes dust and scratches from the image.
28831 Removes noise from the image.
28832 Corrects the tones of the image.
28833 Adjusts the contrast, brightness and color intensity of the scanned image.
28834 Removes red-eye from the image and replaces it with a color of your choice.
28835 Enhances the sharpness of the image
28836 Enhances your image with Image enhancement.
28837 %s already exists.\nWould you like to replace the existing file ?
28841 Name
28842 Size
28843 Before
28847 CorelSCAN 7
28848 &About CorelSCAN 7...
28849 An error has occurred in the Filter Manager...
28850 You must select at least one file...
28851 Continue
28852 &Next >
28853 &Scan
28854 &Process
28855 The destination drive is full.\nYou only have %2.1f MB left and CorelSCAN needs %2.1f MB to proceed.\nYou have enough disk space to proceed without saving the raw data file. \nDo you wish to continue ?
28856 The destination drive is full.\nOnly %2.1f MB are left and CorelSCAN needs %2.1f MB to proceed.\nPlease make sure you have enough space before continuing.
28857 CorelSCAN does not support the following extensions:\n
28858 CorelSCAN does not support the following file types:
28859 &Finish
28860 You are now ready to scan and process your image. \nPress 'Scan' to begin scanning.
28861 You are now ready to process your image. \nPress 'Process' to begin post-processing.
28862 &Cancel
28863 Intellihance RGB...
28864 Intellihance GS...
28865 Default printer
28866 Paused
28867 Error
28868 Pending Deletion
28869 Paper Jam
28870 Paper Out
28871 Manual Feed
28872 Paper Problem
28873 Offline
28874 I/O Active
28875 Busy
28876 Printing
28877 Output Bin Full
28878 Not Available
28879 Waiting
28880 Processing
28881 Initializing
28882 Warming Up
28883 Toner Low
28884 No Toner
28885 Page Punt
28886 User Intervention
28887 Out Of Memory
28888 Door Open
28889 Server Unknown
28890 Ready
28891 1 document waiting
28892 %d documents waiting
28893 Scan
28894 Intellihance CMYK...
28895 Saving to file
28896 Printing scan
28897 Original size
28898 New size
28899 KB
28900 There are no drivers available. Please install them to continue.
28901 Yes
28902 No
28903 N/A
28904 dpi
28905 RAW
28906 No scanner drivers have been detected. CorelSCAN will be limited to images acquired from files.
28907 Your scanner cannot be accessed. Please choose another setting or select another scanner.
28908 CorelSCAN was unable to detect a document.\n\nPlease select the area you wish to scan.