24779 %s: This port is currently being used by a device
24780 Max fax transmit speed: %lu bps
24781 Max fax receive speed: %lu bps
24782 Fax Class:
24783 Class 1
24784 Class 2
24785 Class 2.0
24786 Unknown
24787 Voice Type:
24788 Voice101
24789 Rockwell
24790 Cirrus
24791 Sierra
24792 Unknown
24793 Tests completed
24794 Missing RegLib32.Dll
24795 Missing QueryCom function
24796 Querying modem...
24797 Completed
24798 No modem was found on %s.\n
24799 Make sure the modem is turned on.
24800 This modem supports
24801 .\n
24802 This is a
24803 fax modem.\n
24804 Max fax transmit speed: %lu bps.\n
24805 Max fax receive speed: %lu bps.\n
24806 type voice modem\n
24807 Modem busy. Waiting...
24808 This modem is in use and cannot be tested right now.\n
24809 Exit all apps that may be using this modem and click Retry.\n
24810 Failed
24811 Direct Connect (Cabled)
24812 Windows modem
24813 Modem Properties
24814 Changing the fax class will cause any customized fax settings to be lost. Continue?
24815 Please select an active modem!\n
24816 WZMODCFG.HLP
24817 Another CommSuite program is already using the Modem Properties dialog.
24818 TAPI modems can only be removed through the control panel.\nDo you wish to do this now?
24819 You are removing the active modem. Are you sure?
24820 This modem has not been configured to work with WinFax.\nDo you want to run the WinFax modem configuration wizard now?
24821 The minimum transmit speed cannot be greater than the maximum transmit speed.
24827 and cannot be tested.
24828 Unable to launch the Modem Control Panel
24829 Warning
24831 You must enter a country code.
24832 You must enter an area code.
24833 You must enter a long distance access code.
24834 You must enter an international distance access code.
24835 Setup cannot determine the proper voice settings for this modem.
24836 Dial '1'
24837 Dial '#'
24838 Connection Device
24839 Port
24840 Dialing Properties
24841 Modem Properties
24842 Unable to launch the Modem Control Panel
24843 U.S. Robotics
24844 Windows
24845 Windows
24846 WinFax PRO for Networks
24847 <none>
24921 Modem Configuration Wizard
24922 with speakerphone capabilities.
24923 with telephone
24924
24925 The modem you have selected has less capability than the one you just tested.\n\nClick Cancel and choose another model or click OK to use these settings.
24926 CAS/NetSatisFAXtion
24927 Please restart WinFax to unload the network components. This will avoid possible conflicts.
24929 This library does not contain a list of supported devices.
24930 This library does not contain required configuration information.
24932 WinFax PRO Device Installation Library|WFXWF*.DLL||
24933 No compatible modems were found.
24938 ISDN
24939 The modem you have previously configured has different capabilities then the one just tested.\n\nClick OK to keep the previous settings or cancel to select another model.
24940 This modem has not been configured and you do not have the Administrative\nprevilage necessary to run the Modem Configuration Wizard.
24943 Please first select the calling cards from the Calling Card tab then enable this feature.
24944 The calling card you selected does not have a valid number, please go to the Calling Card tab to configure it or select a different one.
24945 WinFax Peer-to-Peer
24946 You must select a calling card from list below or enter a name for the new calling card.
24947 You have just changed the active modem. Please restart Outlook before you use Symantec WinFax Starter Edition.
24948 Symantec WinFax Starter Edition
25088 Separator
25090 New Toolbar
25125 &Edit...
25127 C&olor Buttons
25129 &Show ToolTips
25131 &Large Buttons
25133 &WinFax Classic
25135 &Captions
25137 &Bar Styles
25139 Toolbars
25141 Unassigned
25151 Close
25152 OK
25153 &Apply
25154 < &Back
25155 &Next >
25156 &Finish
25157 &Help
25158 Cancel
25159 -
25160 Could not find tips file.\nTips not available.\n
25165 TalkWorks Properties
25166 VOICE.HLP
25345 Invalid Folder or Directory.
25346 You are not authorized to modify shared Symantec WinFax Starter Edition settings.\nContact your Windows NT administrator to grant you this right.\nRegistry value accessed:\n%s.
25472 Default
25473 [No translation]
25474 1
25475 1
25476 011
25477 Canada (1)
27679 The following error occurred when attempting to
27680 WinFax PRO
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
