home *** CD-ROM | disk | FTP | other *** search
/ PC World Komputer 1998 April A / Pcwk4a98.iso / Wtestowe / OnNet16 / NETCONF.INF < prev    next >
INI File  |  1997-02-13  |  12KB  |  378 lines
  1.  
  2. ; 
  3. ; NETCONF.INF
  4. ;
  5. ; This file contains information on network drivers and protocols
  6. ; for the installation process.
  7. ;
  8.  
  9. [disks]
  10.     1 =.\crynwr ,"Packet Driver Disk",disk1
  11.     2 =. ,"Packet Driver Disk",disk1
  12.  
  13. [PKTDRV]
  14. DriverName=PKTDRV$
  15. param=INTVEC,"Interrupt Vector",text,"0x60,0x62,0x63,0x64,0x65,0x66",0x60
  16. param=CHAINVEC,"Chain Vector",text,"0x60,0x62,0x63,0x64,0x65,0x66",0x62
  17.  
  18. [pdmap]
  19. ; key=netcard-key,flags,version
  20. ;    key:        string returned by packet driver
  21. ;    netcard-key:    key in netcard section for this driver
  22. ;    flags:        1 = always copy over a new driver
  23. ;    version:    version number returned by this driver
  24. ;
  25. 3c501=pd$3c501,0
  26. 3c503=pd$3c503,0,11
  27. 3c505=pd$3c505,0
  28. 3c507=pd$3c507,0,11
  29. 3c5x9pd=3com$3c5x9pd,0,10
  30. 3c523=pd$3c523,0,11
  31. att=pd$at&t,0
  32. davidsys=pd$davidsys,0,11
  33. de600=pd$de600,0
  34. depca=pd$depca,0
  35. exp16=pd$exp16,0
  36. ne1000=pd$ne1000,0,11
  37. ne2000=pd$ne2000,0,11
  38. ni5210=pd$ni5210,0
  39. ni6510=pd$ni6510,0
  40. ni9210=pd$ni9210,0
  41. ppp16550=ftp$serial,1,3
  42. slp16550=ftp$serial,1,3
  43. serial=ftp$serial,1,3
  44. ;xxx how could these things be different versions?
  45. wd8003e=pd$smc_wd8,1,10
  46. smc_wd=pd$smc_wd8,0,11
  47. ubnicpc=pd$ubnicpc,0
  48. ubnicps2=pd$ubnicps2,0
  49. xxx=x$pe2,0,xxx
  50. xxx=x$pe3,0,xxx
  51. xxx=x$pem,0,xxx
  52.  
  53. [netcard]
  54. ;   key = description, resv1, type, media, resv2, install, config, resv3
  55. ;       key:        unique identifier
  56. ;       description:    text description in quotes
  57. ;       resv1:        reserved, must be zero
  58. ;       type:        pktdrv
  59. ;       media:        ethernet|tokenring|serial
  60. ;       reserved:       reserved, must be null
  61. ;       install:        section name of install script
  62. ;       config:        section name of config script
  63. ;       flags:        0x0001 card uses shared memory
  64. ;
  65. ; The cards are organised in alphabetical order according to the name
  66. ; of the card (except for serial).
  67. ; Make sure you keep them in order if you add a new card
  68.  
  69. ftp$serial="Serial Port Using SLIP or PPP",0,pktdrv,serial,,ftp$serial,ftp$serial_cfg,0
  70. pd$3c501="3Com EtherLink 3C501",0,pktdrv,ethernet,,pd$3c501,pd$3c501_cfg,0
  71. pd$3c503="3Com EtherLink II 3C503",0,pktdrv,ethernet,,pd$3c503,pd$3c503_cfg,0x01
  72. pd$3c505="3Com EtherLink Plus 3C505",0,pktdrv,ethernet,,pd$3c505,pd$3c505_cfg,0
  73. pd$3c507="3Com EtherLink 16 3C507",0,pktdrv,ethernet,,pd$3c507,pd$3c507_cfg,0x01
  74. 3com$3c5x9pd="3Com EtherLink III 3C5X9PD",0,pktdrv,ethernet,,3com$3c5x9pd,3com$3c5x9pd_cfg,0
  75. pd$3c523="3Com EtherLink/MC 3C523",0,pktdrv,ethernet,,pd3c523,pd$3c523_cfg,0x01
  76. pd$att="AT&T ATTNAU",0,pktdrv,ethernet,,pd$att,pd$att_cfg,0x01
  77. pd$davidsys="David Systems DSI",0,pktdrv,ethernet,,pd$davidsys,pd$davidsys_cfg,0
  78. pd$de600="D-Link DE-600 Pocket Ethernet Adapter",0,pktdrv,ethernet,,pd$de600,pd$de600_cfg,0
  79. pd$depca="DEC DE100, DE200, or DEPCA",0,pktdrv,ethernet,,pd$depca,pd$depca_cfg,0x01
  80. pd$exp16="Intel EtherExpress 16",0,pktdrv,ethernet,,pd$exp16,pd$exp16_cfg,0
  81. pd$ne1000="Novell NE1000",0,pktdrv,ethernet,,pd$ne1000,pd$ne1000_cfg,0
  82. pd$ne2000="Novell NE2000",0,pktdrv,ethernet,,pd$ne2000,pd$ne2000_cfg,0
  83. pd$ni5210="Racal-Datacom NI5210",0,pktdrv,ethernet,,pd$ni5210,pd$ni5210_cfg,0x01
  84. pd$ni6510="Racal-Datacom NI6510",0,pktdrv,ethernet,,pd$ni6510,pd$ni6510_cfg,0
  85. pd$ni9210="Racal-Datacom NI9210",0,pktdrv,ethernet,,pd$ni9210,pd$ni9210_cfg,0x01
  86. pd$smc_wd8="SMC/Western Digital 8-bit 8003",0,pktdrv,ethernet,,pd$smc_wd,pd$smc_wd_8cfg,0x01
  87. pd$smc_wd16="SMC/Western Digital 16-bit 8013",0,pktdrv,ethernet,,pd$smc_wd,pd$smc_wd_16cfg,0x01
  88. pd$ubnicpc="Ungermann-Bass UBNIC",0,pktdrv,ethernet,,pd$ubnicpc,pd$ubnicpc_cfg,0x01
  89. pd$ubnicps2="Ungermann-Bass UBNIC MC",0,pktdrv,ethernet,,pd$ubnicps2,pd$ubnicps2_cfg,0x01
  90. x$pe2="Xircom Pocket Ethernet Adapter II PE2PD",0,pktdrv,ethernet,,x$pe2,x$pe2_cfg,0
  91. x$pe3="Xircom Pocket Ethernet Adapter III PE3PD",0,pktdrv,ethernet,,x$pe3,x$pe3_cfg,0
  92. x$pem="Xircom Pocket Ethernet Modem PEMPD",0,pktdrv,ethernet,,x$pem,x$pem_cfg,0
  93.  
  94. ;
  95. ; Install Sections
  96. ;
  97. ; devdir=disk:file    
  98. ; tsr=lookupname,commandline,after1,after2
  99. ;                       
  100. ;
  101. ;   lookupname: text used to search for the line in the file
  102. ;   commandline: text to add the line to the file (includes @path\ and params)
  103. ;   after1:     add line after line containing this text (optional)
  104. ;   after2:     secondary search if after1 not found
  105.  
  106. ;
  107. ; Config Sections
  108. ;
  109. ; mem=key,,type,range,default,flags    
  110. ; io=key,,type,range,default,flags     
  111. ; irq=key,,type,range,default,flags    
  112. ; intvec=key,description,type,range,default,flags    
  113. ; param=key,description,type,range,default,flags  
  114. ; types:      type      range               default
  115. ;             ----      -----               -------
  116. ;             static,   default,            n/a
  117. ;             text,     "value,value,...",  default
  118. ;             chars,    numofchars,         default
  119. ;             keyonly   n/a                 n/a
  120. ;             int,      "first,last,step",  default
  121. ;             hex,      "first,last,step",  default
  122. ;             enum,     "name,value,...",   default
  123. ;             chars,    number of chars     default
  124. ;
  125. ; flags:
  126. ; The flags field indicates special processing for the parameter
  127. ; Current flags are:
  128. ;    0x00000001      memory address absolute (not paragraphs)
  129. ;    0x00000002      optional parameter
  130. ;    0x00000004      software set parameter
  131.  
  132. [pd$3c501]
  133. devdir=1:3c501.com
  134. tsr=3c501,@destdir\3c501.com @intvec @irq @io
  135.  
  136. [pd$3c501_cfg]
  137. DriverName=3c501
  138. irq=,,int,"2,5,1",3
  139. io=,,hex,"0x200,0x400,0x010",0x300
  140. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  141.  
  142. [pd$3c503]
  143. devdir=1:3c503.com
  144. tsr=3c503,@destdir\3c503.com @intvec @irq @io @cable_type
  145.  
  146. [pd$3c503_cfg]
  147. DriverName=3c503
  148. irq=,,int,"2,5,1",3
  149. io=,,hex,"0x200,0x400,0x010",0x300
  150. param=cable_type,"Cable Type",enum,"AUI / 10Base5,0,BNC / 10Base2,1,RJ45 / 10BaseT,1",0,0x02
  151. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  152.  
  153. [pd$3c505]
  154. devdir=1:3c505.com
  155. tsr=3c505,@destdir\3c505.com @intvec @irq @io
  156.  
  157. [pd$3c505_cfg]
  158. DriverName=3c505
  159. irq=,,int,"2,15,1",3
  160. io=,,hex,"0x200,0x400,0x010",0x300
  161. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  162.  
  163. [pd$3c507]
  164. devdir=1:3c507.com
  165. tsr=3c507,@destdir\3c507.com @intvec @io
  166.  
  167. [pd$3c507_cfg]
  168. DriverName=3c507
  169. io=,,hex,"0x200,0x400,0x010",0x300
  170. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  171.  
  172. [3com$3c5x9pd]
  173. devdir=2:3c5x9pd.com
  174. tsr=3c5x9pd,@destdir\3c5x9pd.com @intvec
  175.  
  176. [3com$3c5x9pd_cfg]
  177. DriverName=3c5x9
  178. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  179.  
  180. [pd3c523]
  181. devdir=1:3c523.com
  182. tsr=3c523,@destdir\3c523.com @intvec 
  183.  
  184. [pd$3c523_cfg]
  185. ; It is best not to specify int, io, or mem because the
  186. ; driver will detect the right values.
  187. DriverName=3c523
  188. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  189.  
  190. [pd$att]
  191. devdir=1:at&t.com
  192. tsr=at&t,@destdir\at&t.com @intvec @irq @io @mem
  193.  
  194. [pd$att_cfg]
  195. DriverName=at&t
  196. irq=,,int,"2,5,1",2
  197. io=,,hex,"0x200,0x400,0x010",0x300
  198. mem=,,hex,"0xC800,0xE000,0x0200",0xD000
  199. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  200.  
  201. [pd$davidsys]
  202. devdir=1:davidsys.com
  203. tsr=davidsys,@destdir\davidsys.com @intvec @irq @io @delay_mult
  204.  
  205. [pd$davidsys_cfg]
  206. DriverName=davidsys
  207. irq=,,int,"2,5,1",3
  208. io=,,hex,"0x200,0x400,0x010",0x300
  209. param=delay_mult,"delay multiplier",int,"1,100,1",10
  210. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  211.  
  212. [pd$de600]
  213. devdir=1:de600.com
  214. tsr=de600,@destdir\de600.com @intvec
  215.  
  216. [pd$de600_cfg]
  217. DriverName=de600
  218. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  219. [pd$depca]
  220. devdir=1:depca.com
  221. tsr=depca,@destdir\depca.com @intvec @irq @io @mem
  222.  
  223. [pd$depca_cfg]
  224. DriverName=depca
  225. irq=,,int,"2,15,1",3
  226. io=,,hex,"0x200,0x400,0x010",0x300
  227. mem=,,hex,"0xC800,0xE000,0x0200",0xD000
  228. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  229.  
  230. [pd$exp16]
  231. devdir=1:exp16.com
  232. tsr=exp16,@destdir\exp16.com @intvec @io
  233.  
  234. [pd$exp16_cfg]
  235. DriverName=exp16
  236. io=,,hex,"0x200,0x400,0x010",0x300,0x02
  237. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  238.  
  239. [pd$ne1000]
  240. devdir=1:ne1000.com
  241. tsr=ne1000,@destdir\ne1000.com @intvec @irq @io
  242.  
  243. [pd$ne1000_cfg]
  244. DriverName=ne1000
  245. irq=,,int,"2,5,1",3
  246. io=,,hex,"0x200,0x400,0x010",0x300
  247. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  248.  
  249. [pd$ne2000]
  250. devdir=1:ne2000.com
  251. tsr=ne2000,@destdir\ne2000.com @intvec @irq @io
  252.  
  253. [pd$ne2000_cfg]
  254. DriverName=ne2000
  255. irq=,,int,"2,15,1",2
  256. io=,,hex,"0x200,0x400,0x010",0x300
  257. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  258.  
  259. [pd$ni5210]
  260. devdir=1:ni5210.com
  261. tsr=ni5210,@destdir\ni5210.com @intvec @irq @io @mem
  262.  
  263. [pd$ni5210_cfg]
  264. DriverName=ni5210
  265. irq=,,int,"2,5,1",2
  266. io=,,hex,"0x200,0x400,0x010",0x300
  267. mem=,,hex,"0xC800,0xE000,0x0200",0xD000
  268. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  269.  
  270. [pd$ni6510]
  271. devdir=1:ni6510.com
  272. tsr=ni6510,@destdir\ni6510.com @intvec @irq @io
  273.  
  274. [pd$ni6510_cfg]
  275. DriverName=ni6510
  276. irq=,,int,"2,15,1",2
  277. io=,,hex,"0x200,0x400,0x010",0x300
  278. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  279.  
  280. [pd$ni9210]
  281. devdir=1:ni9210.com
  282. tsr=ni9210,@destdir\ni9210.com @intvec 
  283.  
  284. [pd$ni9210_cfg]
  285. ; It is best not to specify int, io, or mem because the
  286. ; driver will detect the right values.
  287. DriverName=ni9210
  288. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  289.  
  290. [pd$smc_wd]
  291. devdir=1:smc_wd.com
  292. tsr=smc_wd,@destdir\smc_wd.com @intvec @dismemchk @irq @io @mem
  293.  
  294. [pd$smc_wd_8cfg]
  295. DriverName=smc_wd
  296. irq=,,int,"2,7,1",3
  297. io=,,hex,"0x200,0x400,0x010",0x280
  298. mem=,,hex,"0xC800,0xE000,0x0200",0xD000
  299. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  300. param=dismemchk,"Disable Memory Check",enum,"yes,-o,no,",,0x02
  301.  
  302. [pd$smc_wd_16cfg]
  303. DriverName=smc_wd
  304. irq=,,int,"2,15,1",3
  305. io=,,hex,"0x200,0x400,0x010",0x280
  306. mem=,,hex,"0xC800,0xE000,0x0200",0xD000
  307. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  308. param=dismemchk,"Disable Memory Check",enum,"yes,-o,no,",,0x02
  309.  
  310. [pd$ubnicpc]
  311. devdir=1:ubnicpc.com
  312. tsr=ubnicpc,@destdir\ubnicpc.com @intvec @irq @io @mem
  313.  
  314. [pd$ubnicpc_cfg]
  315. DriverName=ubnicpc
  316. irq=,,int,"2,5,1",2
  317. io=,,hex,"0x200,0x400,0x010",0x360
  318. mem=,,hex,"0xC800,0xE000,0x0200",0xD000
  319. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  320.  
  321. [pd$ubnicps2]
  322. devdir=1:ubnicps2.com
  323. tsr=ubnicps2,@destdir\ubnicps2.com @intvec @irq @io @mem
  324.  
  325. [pd$ubnicps2_cfg]
  326. DriverName=ubnicps2
  327. irq=,,int,"2,5,1",2
  328. io=,,hex,"0x200,0x400,0x010",0x360
  329. mem=,,hex,"0xC800,0xE000,0x0200",0xD000
  330. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  331. [ftp$serial]
  332. devdir=2:ppp16550.com
  333. devdir=2:slp16550.com
  334. ; removing previous slp or ppp driver is handled by install
  335. tsr=,@destdir\@serial_driver
  336.  
  337. [ftp$serial_cfg]
  338. DriverName=serial
  339. ; all the configuration is handled as a special case by install
  340.  
  341. [x$pe2]
  342. devdir=2:pe2pd.com
  343. tsr=pe2pd,@destdir\pe2pd SIN=@intvec @lpt @int @non
  344.  
  345. [x$pe2_cfg]
  346. DriverName=pe2pd
  347. param=lpt,"Printer Port",enum,"1,LPT=1,2,LPT=2,3,LPT=3",,0x02
  348. param=int,"Printer Interupt",enum,"5,INT=5,7,INT=7,0,INT=0",,0x02
  349. param=N,"Non-bidirectional Mode",keyonly,,,0x02
  350. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  351.  
  352. [x$pe3]
  353. devdir=2:pe3pd.com
  354. tsr=pe3pd,@destdir\pe3pd SINT=@intvec @lpt @non @linkdisable
  355.  
  356. [x$pe3_cfg]
  357. DriverName=pe3pd
  358. ;xxx can't deal with int, ioaddress
  359. param=lpt,"Printer Port",enum,"1,LPT=1,2,LPT=2,3,LPT=3",,0x02
  360. param=NON,"Non-bidirectional Mode",keyonly,,,0x02
  361. param=LINKDISABLE,"Link Disable",keyonly,,,0x02
  362. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  363.  
  364. [x$pem]
  365. devdir=2:pempd.com
  366. tsr=pempd,@destdir\pempd SINT=@intvec @lpt @non @linkdisable @spp
  367.  
  368. [x$pem_cfg]
  369. DriverName=pempd
  370. ;xxx can't deal with int, ioaddress
  371. param=lpt,"Printer Port",enum,"1,LPT=1,2,LPT=2,3,LPT=3",,0x02
  372. param=NON,"Non-bidirectional Mode",keyonly,,,0x02
  373. param=LINKDISABLE,"Link Disable",keyonly,,,0x02
  374. param=SPP,"Standard Parallel Port Mode",keyonly,,,0x02
  375. ;xxx initfile won't work either
  376. param=initfile,"Initialization File",chars,66,,0x02
  377. intvec=,"Software Interrupt",hex,"0x60,0x80,1",0x60
  378.