home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PC World Komputer 1998 April A
/
Pcwk4a98.iso
/
Lotus
/
Notes46
/
LOTUS027.DSK
/
MODEMS
/
ATT3810.MDM
< prev
next >
Wrap
Text File
|
1993-02-18
|
4KB
|
145 lines
; AT&T COMSPHERE 3800 Series
; Based on tests performed on the following model:
; Rev. J2, Mfg. date 12/4/91, Model 3810-A1-0001
; This command file is intended to work with the
; the AT&T Paradyne COMSPHERE models 3810, 3811,
; and 3820.
;=============================================================
; Last revision date: 02/18/93 (update this date
; each time you edit; it is also advisable to rename
; your edited file [use Save As, rather than Save
; option] to avoid later confusion and to keep the
; original .MDM file intact).
; NOTE: Refer to the file TEMPLATE.MDM (A Sample Modem
; Command File) for a description of modem command
; files and how they work. "A Sample Modem Command
; File" is user selectable within the Lotus Notes
; Setup dialog "Modem Type" listbox in which you found
; this modem command file (see end of listings,
; beginning with a period) and is a printable ASCII
; text file (approximately 15 pages).
; Additional information may be obtained from either of
; the two so-called "generic" modem command files
; (alphabetically listed under letter G, designed for
; use with Notes Releases 2.x and 3.x, 9600 bps and
; 14400 bps maximum, respectively), each of which may
; first be tried as-is with unlisted modems, then edited
; if required (within the Notes edit box, or outside of
; Notes, with any text editor) according to the printed
; instructions within each file, and in compliance with
; the vendor's command set, result codes, DIP switch
; settings, and technical specifications as listed in
; the equipment's users manual.
; For the specific modem(s) listed under this heading:
;===============================================================
[attributes]
MODELS=AT&T COMSPHERE 3800 Series
NULL MODEM=0
MAXIMUM SPEED=57600
DEFAULT SPEED=57600
FIXED SPEED=0
[commands]
ESCAPE=+++
ATTENTION=ATE0V1
HANGUP=ATH0
SETUP=AT&F
SETUP=ATE0V1
SETUP=ATQ0X6&C1&D2S0=0\\D3
RTS/CTS ENABLED=AT\\Q3&R0
RTS/CTS IGNORED=AT\\Q0&R1
VOLUME OFF=ATM0
VOLUME LOW=ATM1L1
VOLUME MEDIUM=ATM1L2
VOLUME HIGH=ATM1L3
ANSWER=ATA
MANUAL DIAL=ATX3D
AUTO PULSE DIAL=ATDP
AUTO TONE DIAL=ATDT
AUTO DIAL SUFFIX=,
[responses]
OK=OK
BUSY=BUSY
NO ANSWER=NO ANSWER
NO CARRIER=NO CARRIER
NO DIALTONE=NO DIALTONE
NO DIALTONE=NO DIAL TONE
ERROR=ERROR
RING=RING
CONNECT, 57600, 14400=CONNECT 14400
CONNECT, 57600, 14400=CONNECT 14400/EC
CONNECT, 57600, 14400=CONNECT 14400/NoEC
CONNECT, 57600, 14400=CONNECT 14400/V42b
CONNECT, 57600, 14400=CONNECT 14400/V42
CONNECT, 57600, 14400=CONNECT 14400/MNP5
CONNECT, 57600, 14400=CONNECT 14400/MNP4
CONNECT, 57600, 14400=CONNECT 14400/MNP3
CONNECT, 57600, 14400=CONNECT 14400/MNP2
CONNECT, 57600, 12000=CONNECT 12000
CONNECT, 57600, 12000=CONNECT 12000/EC
CONNECT, 57600, 12000=CONNECT 12000/NoEC
CONNECT, 57600, 12000=CONNECT 12000/V42b
CONNECT, 57600, 12000=CONNECT 12000/V42
CONNECT, 57600, 12000=CONNECT 12000/MNP5
CONNECT, 57600, 12000=CONNECT 12000/MNP4
CONNECT, 57600, 12000=CONNECT 12000/MNP3
CONNECT, 57600, 12000=CONNECT 12000/MNP2
CONNECT, 57600, 9600=CONNECT 9600
CONNECT, 57600, 9600=CONNECT 9600/EC
CONNECT, 57600, 9600=CONNECT 9600/NoEC
CONNECT, 57600, 9600=CONNECT 9600/V42b
CONNECT, 57600, 9600=CONNECT 9600/V42
CONNECT, 57600, 9600=CONNECT 9600/MNP5
CONNECT, 57600, 9600=CONNECT 9600/MNP4
CONNECT, 57600, 9600=CONNECT 9600/MNP3
CONNECT, 57600, 9600=CONNECT 9600/MNP2
CONNECT, 57600, 4800=CONNECT 4800
CONNECT, 57600, 4800=CONNECT 4800/EC
CONNECT, 57600, 4800=CONNECT 4800/NoEC
CONNECT, 57600, 4800=CONNECT 4800/V42b
CONNECT, 57600, 4800=CONNECT 4800/V42
CONNECT, 57600, 4800=CONNECT 4800/MNP5
CONNECT, 57600, 4800=CONNECT 4800/MNP4
CONNECT, 57600, 4800=CONNECT 4800/MNP3
CONNECT, 57600, 4800=CONNECT 4800/MNP2
CONNECT, 57600, 2400=CONNECT 2400
CONNECT, 57600, 2400=CONNECT 2400/EC
CONNECT, 57600, 2400=CONNECT 2400/NoEC
CONNECT, 57600, 2400=CONNECT 2400/V42b
CONNECT, 57600, 2400=CONNECT 2400/V42
CONNECT, 57600, 2400=CONNECT 2400/MNP5
CONNECT, 57600, 2400=CONNECT 2400/MNP4
CONNECT, 57600, 2400=CONNECT 2400/MNP3
CONNECT, 57600, 2400=CONNECT 2400/MNP2
CONNECT, 57600, 1200=CONNECT 1200
CONNECT, 57600, 1200=CONNECT 1200/EC
CONNECT, 57600, 1200=CONNECT 1200/NoEC
CONNECT, 57600, 1200=CONNECT 1200/MNP5
CONNECT, 57600, 1200=CONNECT 1200/MNP4
CONNECT, 57600, 1200=CONNECT 1200/MNP3
CONNECT, 57600, 1200=CONNECT 1200/MNP2