home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PC World Komputer 1998 April A
/
Pcwk4a98.iso
/
Lotus
/
Domino46
/
LOTUS031.DSK
/
MODEMS
/
TTRAIL.MDM
< prev
next >
Wrap
Text File
|
1993-02-18
|
3KB
|
100 lines
; Telebit Trailblazer
; Model RA12E (Standalone)
; Tested Version R2.3--024
;=============================================================
; Last revision date: 02/18/93 (update this date
; each time you edit; it is also advisable to rename
; your edited file [use Save As, rather than Save
; option] to avoid later confusion and to keep the
; original .MDM file intact).
; NOTE: Refer to the file TEMPLATE.MDM (A Sample Modem
; Command File) for a description of modem command
; files and how they work. "A Sample Modem Command
; File" is user selectable within the Lotus Notes
; Setup dialog "Modem Type" listbox in which you found
; this modem command file (see end of listings,
; beginning with a period) and is a printable ASCII
; text file (approximately 15 pages).
; Additional information may be obtained from either of
; the two so-called "generic" modem command files
; (alphabetically listed under letter G, designed for
; use with Notes Releases 2.x and 3.x, 9600 bps and
; 14400 bps maximum, respectively), each of which may
; first be tried as-is with unlisted modems, then edited
; if required (within the Notes edit box, or outside of
; Notes, with any text editor) according to the printed
; instructions within each file, and in compliance with
; the vendor's command set, result codes, DIP switch
; settings, and technical specifications as listed in
; the equipment's users manual.
; For the specific modem(s) listed under this heading:
;===============================================================
; NOTE: This command file does not make use of PEP (Packetized
; Ensemble Protocol [TM]). To enable PEP, please refer to your
; vendor documentation.
[attributes]
MODELS=Telebit Trailblazer (Standalone)
NULL MODEM=0
MAXIMUM SPEED=9600
DEFAULT SPEED=9600
[commands]
ESCAPE=+++
ATTENTION=ATE0V1
HANGUP=ATH0
SETUP=AT&F
SETUP=ATE0V1X1S0=0S50=0S90=0S67=0S61=50S52=2
SETUP=ATS51=255
RTS/CTS ENABLED=ATS58=2S66=1
RTS/CTS IGNORED=ATS58=0S66=0
VOLUME OFF=ATM0
VOLUME LOW=ATM1
VOLUME MEDIUM=ATM1
VOLUME HIGH=ATM1
ANSWER=ATA
MANUAL DIAL=ATX1S9=1D
AUTO DIAL SETUP=ATS9=6
AUTO PULSE DIAL=ATDP
AUTO TONE DIAL=ATDT
AUTO DIAL SUFFIX=,
[responses]
OK=OK
BUSY=BUSY
NO ANSWER=NO ANSWER
NO CARRIER=NO CARRIER
NO DIALTONE=NO DIAL TONE
NO DIALTONE=NO DIALTONE
ERROR=ERROR
RING=RING
CONNECT, 9600, 9600=CONNECT 9600/REL
CONNECT, 9600, 9600=CONNECT 9600
CONNECT, 9600, 4800=CONNECT 4800/REL
CONNECT, 9600, 4800=CONNECT 4800
CONNECT, 9600, 2400=CONNECT 2400/REL
CONNECT, 9600, 2400=CONNECT 2400
CONNECT, 9600, 1200=CONNECT 1200/REL
CONNECT, 9600, 1200=CONNECT 1200