home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PC World Komputer 1998 April A
/
Pcwk4a98.iso
/
Lotus
/
Domino46
/
LOTUS031.DSK
/
MODEMS
/
N9635E.MDM
< prev
next >
Wrap
Text File
|
1994-04-26
|
3KB
|
112 lines
; NEC N9635E Multi Mode V.32 Data Modem
; This file IS based upon ROM Version 2.06 11-07-90
;==================================================
; Last revision date: 04/26/94 (update this date
; each time you edit; it is also advisable to rename
; your edited file [use Save As, rather than Save
; option] to avoid later confusion and to keep the
; original .MDM file intact).
; NOTE: Refer to the file TEMPLATE.MDM (A Sample Modem
; Command File) for a description of modem command
; files and how they work. "A Sample Modem Command
; File" is user selectable within the Lotus Notes
; Setup dialog "Modem Type" listbox in which you found
; this modem command file (see end of listings,
; beginning with a period) and is a printable ASCII
; text file (approximately 14 pages).
; Additional information may be obtained from either of
; the two so-called "generic" modem command files
; (alphabetically listed under letter G, designed for
; use with Notes Releases 2.x and 3.x, 9600 bps and
; 14400 bps maximum, respectively), each of which may
; first be tried as-is with unlisted modems, then edited
; if required (within the Notes edit box, or outside of
; Notes, with any text editor) according to the printed
; instructions within each file, and in compliance with
; the vendor's command set, result codes, DIP switch
; settings, and technical specifications as listed in
; the equipment's users manual.
; For the specific modem(s) listed under this heading:
;=====================================================
; Switch settings are as follows:
;
; Front: 1 2 3 4 5 6 7 8
; OFF F F F F F F ON
[attributes]
MODELS=NEC N9635E Multi Mode V.32 Data Modem
DEFAULT SPEED=38400
MAXIMUM SPEED=38400
NULL MODEM=0
[commands]
ESCAPE=+++
ATTENTION=ATE0V1
HANGUP=ATH0
SETUP=AT&F0
SETUP=ATE0
SETUP=AT%P4&C1&D2\\D0\\N6S0=0\\V1
RTS/CTS ENABLED=AT\\Q3
RTS/CTS IGNORED=AT\\Q0
VOLUME OFF=ATM0
VOLUME LOW=ATM1
VOLUME MEDIUM=ATM1
VOLUME HIGH=ATM1
ANSWER=ATA
MANUAL DIAL=ATX1S9=1D,
AUTO DIAL SETUP=ATS9=6
AUTO PULSE DIAL=ATDP
AUTO TONE DIAL=ATDT
AUTO DIAL SUFFIX=,
[responses]
OK=OK
BUSY=BUSY
NO ANSWER=NO ANSWER
NO CARRIER=NO CARRIER
NO DIALTONE=NO DIAL TONE
ERROR=ERROR
RING=RING
CONNECT, 38400,9600=CONNECT 9600
CONNECT, 38400,9600=CONNECT 9600/REL
CONNECT, 38400,9600=CONNECT 9600/REC
CONNECT, 38400,9600=CONNECT 9600/V.42
CONNECT, 38400,9600=CONNECT 9600/V.42bis
CONNECT, 38400,4800=CONNECT 4800
CONNECT, 38400,4800=CONNECT 4800/REL
CONNECT, 38400,4800=CONNECT 4800/REC
CONNECT, 38400,4800=CONNECT 4800/V.42
CONNECT, 38400,4800=CONNECT 4800/V.42bis
CONNECT, 38400,2400=CONNECT 2400
CONNECT, 38400,2400=CONNECT 2400/REL
CONNECT, 38400,2400=CONNECT 2400/REC
CONNECT, 38400,2400=CONNECT 2400/V.42
CONNECT, 38400,2400=CONNECT 2400/V.42bis
CONNECT, 38400,1200=CONNECT 1200
CONNECT, 38400,1200=CONNECT 1200/REL
CONNECT, 38400,1200=CONNECT 1200/REC
CONNECT, 38400,1200=CONNECT 1200/V.42
CONNECT, 38400,1200=CONNECT 1200/V.42bis