home *** CD-ROM | disk | FTP | other *** search
- ; Multitech V.32/V.32bis w/V.42bis
- ; Models MT932BA (9600 bps) and 1432BA (14400 bps) modems.
-
- ;=============================================================
- ; Last revision date: 02/18/93 (update this date
- ; each time you edit; it is also advisable to rename
- ; your edited file [use Save As, rather than Save
- ; option] to avoid later confusion and to keep the
- ; original .MDM file intact).
-
- ; NOTE: Refer to the file TEMPLATE.MDM (A Sample Modem
- ; Command File) for a description of modem command
- ; files and how they work. "A Sample Modem Command
- ; File" is user selectable within the Lotus Notes
- ; Setup dialog "Modem Type" listbox in which you found
- ; this modem command file (see end of listings,
- ; beginning with a period) and is a printable ASCII
- ; text file (approximately 15 pages).
-
- ; Additional information may be obtained from either of
- ; the two so-called "generic" modem command files
- ; (alphabetically listed under letter G, designed for
- ; use with Notes Releases 2.x and 3.x, 9600 bps and
- ; 14400 bps maximum, respectively), each of which may
- ; first be tried as-is with unlisted modems, then edited
- ; if required (within the Notes edit box, or outside of
- ; Notes, with any text editor) according to the printed
- ; instructions within each file, and in compliance with
- ; the vendor's command set, result codes, DIP switch
- ; settings, and technical specifications as listed in
- ; the equipment's users manual.
-
- ; For the specific modem(s) listed under this heading:
- ;===============================================================
-
- ; Switch settings:
- ;
- ; 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
- ; U U D U U U D D D U D D U U U U
-
- [attributes]
-
- MODELS=MultiTech 932BA & 1432BA (AT Responses)
- NULL MODEM=0
- MAXIMUM SPEED=38400
- ; 38400 for the 932BA, 57600 for the 1432BA
- DEFAULT SPEED=38400
-
- [commands]
-
- ESCAPE=+++
-
- ATTENTION=ATE0V1
-
- HANGUP=ATH0
-
- SETUP=AT&F
-
- SETUP=ATE0V1
-
- SETUP=AT$SB38400
-
- ; .. SETS SERIAL BPS RATE FROM DTE TO DCE AT 38400
- ; (UI WILL OVERRIDE AS REQUIRED BY OS LIMIT)
-
- SETUP=AT&E1&E4&E13&E15$BA0&D2&C1#A0
- ; &E1 .. AUTO-RELIABLE ERROR CORRECTION
- ; &E4 .. CTS MODEM-INITIATED FLOW CONTROL
- ; &E13 .. PACING ENABLED (FLOW CONTROL, MODEM - SOFTWARE)
- ; &E15 .. DATA COMPRESSION ENABLED
- ; $BA0 .. ALLOWS SERIAL BAUD AND MODEM BAUD TO BE INPEPENDANT
- ; &D2 .. MODEM REACTS TO DTR NORMALLY (GOES ON HOOK WHEN DTR LOST)
- ; &C1 .. ALLOWS CARRIER DETECT TO ACT NORMALLY
- ; #A0 .. ENABLES AUTO-SPEED DETECT (14400) TO (12000) TO 9600 TO 4800
- TO 2400 TO 1200 TO 300 BAUD
-
- SETUP=AT&Q1Q0V1X4S0=0
- ; &Q1 .. SELECTS STANDARD AT COMMAND SET
- ; Q0 .. RESULT CODES SENT
- ; V1 .. RESULT CODES SENT AS WORDS
- ; X4 .. SELECTS STANDARD AT COMMAND SET WITH "NO DIAL TONE" AND "BUSY"
- ; S0=0 .. SETS RINGS UNTIL ANSWER TO 0 (WILL NOT AUTO-ANSWER)
-
- VOLUME OFF=ATM0
- ; SPEAKER ALWAYS OFF
-
- VOLUME LOW=ATM1
- VOLUME MEDIUM=ATM1
- VOLUME HIGH=ATM1
- ;VOLUME ON UNTIL CARRIER DETECT=ATM1
-
- RTS/CTS ENABLED=AT&E13
- ; (PACING ON, FLOW CONTROL ENABLED)
- RTS/CTS IGNORED=AT&E12
- ; (PACING OFF, FLOW CONTROL DISABLED)
-
- ANSWER=ATA
-
- MANUAL DIAL=ATB0S9=1D
- ; B0 .. NO WAIT FOR TONE DIALING
-
- AUTO DIAL SETUP=ATS9=6
- AUTO PULSE DIAL=ATDP
- AUTO TONE DIAL=ATDT
- AUTO DIAL SUFFIX=,
- ; , .. COMMA IN DIALING STRING = DEFAULT 2 SECOND PAUSE PER COMMA
-
- [responses]
-
- OK=OK
-
- BUSY=BUSY
-
- NO ANSWER=NO ANSWER
-
- NO CARRIER=NO CARRIER
-
- NO DIALTONE=NO DIAL TONE
-
- ERROR=ERROR
-
- RING=RING
-
- CONNECT, 38400,14400=CONNECT 14400 LAPM COMPRESSED
- CONNECT, 38400,14400=CONNECT 14400 LAPM
- CONNECT, 38400,14400=CONNECT 14400 RELIABLE COMPRESSED
- CONNECT, 38400,14400=CONNECT 14400 RELIABLE
- CONNECT, 38400,14400=CONNECT 14400
-
- CONNECT, 38400,12000=CONNECT 12000 LAPM COMPRESSED
- CONNECT, 38400,12000=CONNECT 12000 LAPM
- CONNECT, 38400,12000=CONNECT 12000 RELIABLE COMPRESSED
- CONNECT, 38400,12000=CONNECT 12000 RELIABLE
- CONNECT, 38400,12000=CONNECT 12000
-
- CONNECT, 38400,9600=CONNECT 9600 LAPM COMPRESSED
- CONNECT, 38400,9600=CONNECT 9600 LAPM
- CONNECT, 38400,9600=CONNECT 9600 RELIABLE COMPRESSED
- CONNECT, 38400,9600=CONNECT 9600 RELIABLE
- CONNECT, 38400,9600=CONNECT 9600
-
- CONNECT, 38400,7200=CONNECT 7200 LAPM COMPRESSED
- CONNECT, 38400,7200=CONNECT 7200 LAPM
- CONNECT, 38400,7200=CONNECT 7200 RELIABLE COMPRESSED
- CONNECT, 38400,7200=CONNECT 7200 RELIABLE
- CONNECT, 38400,7200=CONNECT 7200
-
- CONNECT, 38400,4800=CONNECT 4800 LAPM COMPRESSED
- CONNECT, 38400,4800=CONNECT 4800 LAPM
- CONNECT, 38400,4800=CONNECT 4800 RELIABLE COMPRESSED
- CONNECT, 38400,4800=CONNECT 4800 RELIABLE
- CONNECT, 38400,4800=CONNECT 4800
-
- CONNECT, 38400,2400=CONNECT 2400 LAPM COMPRESSED
- CONNECT, 38400,2400=CONNECT 2400 LAPM
- CONNECT, 38400,2400=CONNECT 2400 RELIABLE COMPRESSED
- CONNECT, 38400,2400=CONNECT 2400 RELIABLE
- CONNECT, 38400,2400=CONNECT 2400
-
- CONNECT, 38400,1200=CONNECT 1200 LAPM COMPRESSED
- CONNECT, 38400,1200=CONNECT 1200 LAPM
- CONNECT, 38400,1200=CONNECT 1200 RELIABLE COMPRESSED
- CONNECT, 38400,1200=CONNECT 1200 RELIABLE
- CONNECT, 38400,1200=CONNECT 1200
-
-
-
-
-
-