1 Re&ceive all packets except those that meet the criteria below
2 &Transmit all packets except those that meet the criteria below
3 Dr&op all packets except those that meet the criteria below
4 There is not enough memory to complete this operation. Close some programs, and then try again.
5 Source Address
6 Source Network Mask
7 Destination Address
8 Destination Mask
9 Protocol
10 Source Port or Type
11 Destination Port or Code
12 TCP
13 UDP
14 ICMP
15 Any
16 Other
17 I&CMP type:
18 IC&MP code:
19 Sour&ce port:
20 Desti&nation port:
21 IP port number
22 Enter an IP address for the source.
23 Enter a mask for the source address.
24 Enter an IP address for the destination.
25 Enter a mask for the destination address.
26 The protocol number is not valid. Enter a valid protocol number.
27 There is not enough memory available to perform this operation. Close some programs, and then try again.
28 Windows could not save the filter information. Confirm that the configuration is correct.
29 Source Network Number
30 Source Node
31 Source Socket
32 Destination Socket
33 Destination Network
34 Destination Node
35 Packet Type
36 Enter a value for the network number.
37 Enter a value for the network mask.
38 Enter a value for the node.
39 Enter a value for the socket.
40 Enter a value for the packet type.
41 The network number is not valid.
42 The node number is not valid.
43 The socket number is not valid.
44 The packet type is not valid.
45 Enter a valid network mask.
46 The IP address and the subnet mask entered are not compatible.\nConfirm that both values are correct before continuing.
47 The IP address and the subnet mask entered are not compatible.\nConfirm that both values are correct before continuing.
48 Proto&col number:
49 TCP [established]
50 Any
51 D&o not permit packets listed below
52 &Permit only the packets listed below
53 User's mask
54 User's address
55 Unknown
56 Add IP Filter
57 Edit IP Filter
58 New Filter
59 Edit Filter
60 Inbound Filters
61 Outbound Filters
62 Set Demand-dial Filters
63 The option you selected will not allow this interface to receive any packets. To enable this interface to receive packets, select the other option or create a filter.
64 The option you selected will not allow this interface to transmit any packets. To enable this interface to transmit packets, select the other option or create a filter.
65 Source Prefix Length
66 Destination Prefix Length
67 Enter IPV6 address for the source.
68 Enter prefix length for the source address.
69 Enter IPV6 address for the destination.
70 Enter prefix length for the destination address.
71 Invalid source prefix length.
72 Invalid destination prefix length.
73 Add IPV6 Filter
74 Edit IPV6 Filter
75 Invalid IPV6 source address.
76 Invalid IPV6 destination address.
6600 The registry call failed. Confirm that your maximum registry size has not been exceeded and that you have sufficient permissions to perform this operation.
6601 The registry open of "%s" failed. Confirm that your maximum registry size has not been exceeded and that you have sufficient permissions to perform this operation.
6602 The registry create of "%s" failed. Confirm that your maximum registry size has not been exceeded and that you have sufficient permissions to perform this operation.
6603 The registry set value of "%s" failed. Confirm that your maximum registry size has not been exceeded and that you have sufficient permissions to perform this operation.
6604 %s
6605 %1\n\n%2
6606 Additional information is available :\n\nError code: %1 \n\nError parameter: %2
6607 %1 (%2)
6608 Please wait while the %2 service on %1 stops.
6609 Please wait while the %2 service on %1 starts.
6610 An error occurred while trying to start the %2 service on %1. For more information about the error, see Event Viewer. (Right-click the My Computer icon on your Windows desktop, and then click Manage. In the Computer Management console, click Event Viewer.)
6611 An error occurred while trying to stop the %2 service on %1. For more information about the error, see Event Viewer. (Right-click the My Computer icon on your Windows desktop, and then click Manage. In the Computer Management console, click Event Viewer.)
6612 An error occurred.
6613 There is not enough memory available to open this dialog box. Close some applications, and then try again.
6614 The IP address is invalid. Enter a valid IP address.
6615 Stopping %s
6616 Starting %s
14005 These filters control which packets are received by this network.
