1024 An error occurred while loading the Terminal Services ActiveX control.\nPlease make sure the correct version of mstscax.dll is in the path
1025 Could not load the Terminal Services ActiveX control.\nMake sure mstscax.dll is in the path.
1026 The Terminal Services ActiveX control (mstscax.dll)\ndoes not match the version of the client shell.
1028 The file (%s) could not be found.
1029 Unable to create or access your %s folder (%s).\nYour connection settings will not be automatically saved on exit.
1030 Unable to open connection file - %s
1031 An error occurred while saving to file %s
1032 An error occurred while loading from file %s
1033 This computer can't connect to the remote computer.\n\nThe problem might be due to low virtual memory on your computer. Close your other programs, and then try connecting again. If the problem continues, contact your network administrator or technical support.
1034 Unable to get the path to your `My Documents' folder
1035 An error occurred while initializing your default connection settings
1037 Remote Desktop Connection Usage
1039 The path you entered, '%s', is too long so your connection could not be saved.\nPlease try to save the file again with a shorter path.
1041 Help cannot be displayed because your system does not have HTML Help installed.\nPlease install HTML Help and try again.
1043 Invalid connection file (%s) specified
1054 Connecting to %s
1055 The %s domain/workgroup does not contain any Terminal servers.
1070 &Options >>
1071 &Options <<
1073 16 Colors
1074 256 Colors
1075 High Color (15 bit)
1076 High Color (16 bit)
1077 True Color (24 bit)
1078 %1!d! by %2!d! pixels
1079 Full Screen
1080 In full screen mode only
1081 On the remote computer
1082 On the local computer
1083 Bring to this computer
1084 Leave at remote computer
1085 Do not play
1086 <Browse for more...>
1087 General
1088 Display
1089 Local Resources
1090 Programs
1091 Experience
1092 Remote Desktop Files (*.RDP)*.RDP
1094 Close
1097 Remote Desktop Disconnected
1098 Highest Quality (32 bit)
1099 Network Level Authentication supported.
1100 Network Level Authentication not supported.
1200 Cancel
1201 Remote Desktop
1202 Connection
1203 Tahoma
1204 20
1205 Tahoma
1206 24
1207 5
1220 Modem (28.8 Kbps)
1221 Modem (56 Kbps)
1222 Broadband (128 Kbps - 1.5 Mbps)
1223 LAN (10 Mbps or higher)
1224 Custom (Defined in Options / Experience)
1225 Custom
1226 OK
1227 The server name specified is invalid.
1228 Remote Desktop Connection
1229 The pre-release version of Remote Desktop Connection has expired. To download the full version of Remote Desktop Connection, go to Windows Update or contact your system administrator.
2000 Because of an unknown error, the remote session will be disconnected. The local computer might be low on memory.\nClose some programs, and then try connecting to the remote computer again.
2001 The remote session will be disconnected. Your computer might be low on memory.\nClose some programs, and then try connecting to the remote computer again.
2002 Error: Out of memory. The remote session will be disconnected.\nClose some programs on the local computer, and then try connecting to the remote computer again.
2003 Error: Unable to allocate window resources. The remote session will be disconnected.\nClose some programs on the local computer, and then try connecting to the remote computer again.
2004 Error: Unable to allocate window resources. The session will be disconnected.\nAfter closing some applications, try to reconnect the session.
2005 An internal state error has occurred. The remote session will be disconnected. Your local computer might be low on memory.\nClose some programs, and then try connecting to the remote computer again.
2006 Your Remote Desktop session is about to end.\n\nThis computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support.
2007 Error: An unrecoverable error occurred while the client was attempting to connect.\nClose some programs, and then try connecting to the remote computer again.
2998 Your Remote Desktop session is about to end.\n\nThis computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support.
2999 Fatal Error (Error Code: %d)
3000 &Help
3001 Remote Desktop Connection &Help
3002 &About
3013 &Close
4000 Remote Desktop Connection
4001 Use your computer to connect to a computer that is located elsewhere and run programs or access files.
4002 Connect
4003 Edit
4004 Remote Desktop Connection
4005 Accessories
13300 An error occurred while loading from registry key %s
13301 An error occurred.\n\nTry to reconnect. If the problem continues, contact the owner of the remote computer or your network administrator.
13302 Advanced
13303 &Details >>
13304 &Details <<
13308 Please review any messages that appear.
13310 Connected to %s
13314 The remote computer could not be found. Please contact your helpdesk about this error.
13315 The specified computer name contains invalid characters.\nFor assistance, contact your system administrator.
13322 The network connection to the remote computer was lost.
13323 Attempting to reconnect.
13324 OK
13325 Connect
13342 Allow me to select later
13343 Ask for password (NTLM)
13344 Smart card
13345 Use my currently logged on credentials
13346 Ask for password (Basic)
13347 A valid gateway server address must be specified.
13348 Connections using a gateway server are not supported by your system configuration.
13349 You have specified to use a gateway server, however this feature is not supported by your system configuration.
13350 You have specified to auto-detect the presence of a gateway server, however this feature is not supported by your system configuration. If you continue, you will not use a gateway server. Do you wish to continue?
13351 Default (Use gateway if necessary)
13352 Default (Always use gateway)
13354 Use gateway if necessary
13355 Always use gateway
13356 Do not use gateway
13360 Do not attempt authentication
13361 Always connect, even if authentication fails
13362 Do not connect if authentication fails
13363 Warn me if authentication fails
13384 An unknown parameter was specified in computer name field.
13385 You will be asked for credentials when you connect.
13386 The saved credentials for this remote computer will be used to connect. You can <a id="TscLinkEditSavedCreds">edit</a> or <a id="TscLinkDelSavedCreds">delete</a> these credentials.
13387 You will be asked for credentials when you connect. To use saved credentials, clear the following check box.
13388 Your system administrator does not permit asking for credentials.
13389 The credentials of the currently logged on user will be used to connect.
13390 You will be asked for credentials when you connect. To use the current user credentials, clear the following check box.
13391 Your system administrator does not permit asking for credentials.
13392 No credentials will be sent to this remote computer.
13393 The credentials saved in the RDP file currently in use will be used to connect. You can <a id="TscLinkDelRdpCreds">delete</a> these credentials.
13394 Are you sure you want to delete the saved credentials?
13395 The remote computer name is not valid. Enter a valid remote computer name.
13396 The computer name field is blank. Enter a remote computer name.
13398 A connection will not be made because your system administrator has restricted the credentials that may be used.
13400 Update the credentials for %s. These credentials will be used when you connect to the remote computer.
13401 Unknown Device
13402 Supported Plug and Play devices
13403 Drives
13404 Devices that I plug in later
13405 Drives that I connect to later
13406 Update your credentials
13407 These credentials will be used to connect to %s. Clicking Submit will overwrite your previous credentials.
13408 These credentials will be used to connect to %s. If %s does not support Network Level Authentication, it will not accept these credentials. Clicking Submit will overwrite your previous credentials.
13451 None specified
13454 These credentials will be used to connect to %s. Clicking OK will overwrite your previous credentials.
13455 Update your TS Gateway server credentials
13456 You will be asked for credentials when you connect to %s.
13457 TS Gateway server will not be used to connect to the remote computer.
14000 These credentials will be used to connect to %s. Clicking OK will overwrite your previous credentials.
14001 These credentials will be used to connect to %s. If %s does not support Network Level Authentication, it will not accept these credentials. Clicking OK will overwrite your previous credentials.
14002 Starting...
14003 RemoteApp
14004 Waiting for remote program to start...
14005 Log off RemoteApp
14006 RemoteApp Disconnected
14007 The remote program has been terminated.\nFor assistance, contact your system administrator.
14008 The program did not start on the remote computer.\nFor assistance, contact your system administrator.
14009 The program %s was not found.\nFor assistance, contact your system administrator.
14010 RemoteApp Error
14011 Started
14012 Please specify either a remote program to run or a remote file to open.
14013 You must unlock your Terminal Services session before you can start a RemoteApp program.
14014 Windows cannot start the RemoteApp program.\n\nThe following RemoteApp program is not in the list of authorized programs: \n%s\n\nFor assistance, contact your system administrator.
14015 The terminal server is not configured to open the type of data file that you are attempting to open.\nThe complete name of the file that you are trying to open is:\n %s\nFor assistance, contact your system administrator.
14016 The remote program cannot start while the Terminal Services session is in Secure Desktop mode.
14017 None specified
14018 The digital signature of this RDP File cannot be verified. The remote connection cannot be started.
14019 This RDP File is corrupted. The remote connection cannot be started.
14020 Your administrator has set policy that prevents the launching of this RDP file. The remote connection cannot be started.
14021 This RDP file has settings that cannot be overridden by command line. The remote connection cannot be started.
14024 Remote Desktop Protocol %s supported.
14025 Shell Version %d.%d.%d
14027 MSTSC [<connection file>] [/v:<server[:port]>] [/admin] [/f[ullscreen]]\n[/w:<width> /h:<height>] [/public] | [/span] [/edit "connection file"] [/migrate]\n\n"connection file" -- Specifies the name of an .rdp file for the connection.\n\n/v:<server[:port]> -- Specifies the remote computer to which you want to\nconnect.\n\n/admin -- Connects you to the session for administering a server.\n\n/f -- Starts Remote Desktop in full-screen mode.\n\n/w:<width> -- Specifies the width of the Remote Desktop window.\n\n/h:<height> -- Specifies the height of the Remote Desktop window.\n\n/public -- Runs Remote Desktop in public mode.\n\n/span -- Matches the remote desktop width and height with the local\nvirtual desktop, spanning across multiple monitors if necessary. To span\nacross monitors, the monitors must all have the same height and be aligned\nvertically.\n\n/edit -- Opens the specified .rdp connection file for editing.\n\n/migrate -- Migrates legacy connection files that were created with\nClient Connection Manager to new .rdp connection files.
15010 You will be asked for credentials when you connect to this TS Gateway server.
15011 Your Windows logon credentials will be used to connect to this TS Gateway server.
15012 Saved credentials will be used to connect to this TS Gateway server. You can <a id="TscProxyLinkEditSavedCreds">edit</a> or <a id="TscProxyLinkDelSavedCreds">delete</a> these credentials.
15013 Example: computer.fabrikam.com
15015 Connect and don't warn me
15016 Do not connect
15017 Warn me
15018 Saved credentials will be used to connect to this computer. You can <a id="TscLinkEditSavedCreds">edit</a> or <a id="TscLinkDelSavedCreds">delete</a> these credentials.
15019 Your Windows logon credentials will be used to connect.
15020 The computer name field is blank. Enter a full remote computer name.
15023 If the actual verification does not meet minimum policy requirements:
15024 \nAuthentication options:
15025 Server authentication verifies that you are connecting to the intended remote computer. The strength of the verification required to connect is determined by your system security policy.
