401 Some modems do not accept user initialization commands greater than 57 characters.\n\nInformation about this limitation can be obtained from your modem manufacturer
402 Warning
460 There is not enough memory to view the General dialog box.\nClose some files or programs, and then try again.
461 There is not enough memory to view the Modem Settings dialog box.\nClose some files or programs, and then try again.
463 Each calling address must be set to 'Automatic' or to a unique ring pattern.\n\nChange the duplicate ring pattern to a different one.
465 Standard EC
466 Forced EC
467 Cellular
468 Disabled
469 Enabled
470 Disabled
480 AUTO (1 Ch.)
481 AUTO (2 Ch.)
482 PPP (56K)
483 PPP (64K)
484 PPP (112K)
485 PPP (112K,PAP)
486 PPP (112K,CHAP)
487 PPP (112K,MSCHAP)
488 PPP (128K)
489 PPP (128K,PAP)
490 PPP (128K,CHAP)
491 PPP (128K,MSCHAP)
500 V.120 (64K)
501 V.120 (56K)
502 V.120 (112K)
503 V.120 (128K)
504 X.75 (64K)
505 X.75 (128K)
506 X.75 (T.70)
507 X.75 (BTX)
508 V.110 (1.2K)
509 V.110 (2.4K)
510 V.110 (4.8K)
511 V.110 (9.6K)
512 V.110 (12.0K)
513 V.110 (14.4K)
514 V.110 (19.2K)
515 V.110 (28.8K)
516 V.110 (38.4K)
517 V.110 (57.6K)
518 Analog (V.34/V.90)
550 ESS5 (AT&T) (North America)
551 AT&T Point to Multipoint
552 National ISDN 1 (NI-1)
553 Northern Telecom DMS 100 (NT1)
554 NTT INS64 (Japan)
555 European ISDN (DSS1)
556 German National (1TR6) (rarely used)
557 French National (VN3) (rarely used)
558 Belgium National (rarely used)
559 Australian National (rarely used)
560 Unknown switch
570 The ISDN Configuration for this modem\nis not complete.\n\nPlease fill out the information in the\nISDN Tab before using this modem.
600 PPP (56K,GSM)
601 PPP (64K,GSM)
602 V.120 (64K,GSM)
604 V.110 (1.2K,GSM)
605 V.110 (2.4K,GSM)
606 V.110 (4.8K,GSM)
607 V.110 (9.6K,GSM)
608 V.110 (12.0K,GSM)
609 V.110 (14.4K,GSM)
610 V.110 (19.2K,GSM)
611 V.110 (28.8K,GSM)
612 V.110 (38.4K,GSM)
613 V.110 (57.6K,GSM)
614 Analog RLP
615 Analog NRLP
616 GPRS
617 PIAFS - incoming
618 PIAFS - outgoing
700 Use current TAPI location
2006 Attached To
2007 Not present
2008 Not functional
2009 Needs reboot
2010 #To finish setting up your modem, you must restart your computer.\n\nDo you want to restart your computer now?
2011 Modem not properly installed
2012 Unknown port
3000 Modem Setup
3018 Modems
3019 Installs a new modem and changes modem properties.
3053 The modem properties cannot be displayed because the modem is not available.\n\nRestart the system and try again.
3054 Properties for Modems
3060 Are you sure you want to remove the selected modem(s) from your system?
3061 Windows was unable to remove the modem '%1' from %2.
3062 Modem
3069 There is not enough memory to open the modem control panel.\n\nClose some programs and try again.
3073 You must be a System Administrator to install a modem.
3074 No modems are installed. You must be a System Administrator to install a modem.
3076 You must shut down and restart your computer before the new settings will take effect.\n\nDo you want to restart your computer now?
3077 Network Settings Change
3200 300 Baud
3201 1200 Baud
3202 2400 Baud
3203 9600 Baud
3204 19.2K Baud
3205 38.4K Baud
3206 57.6K Baud
3207 No response
3212 Command
3213 Response
3214 The port that the modem is attached could not be opened. This may be the result of a hardware conflict. Check the device manager to verify all devices are functional.
3215 The port that the modem is using is currently open by another application. Exit any application that may currently be using the port.
3218 OpenComm
3221 115K Baud
3222 Updating
3223 Error
3233 Success
3236 The modem failed to respond. Make sure it is properly connected and turned on. If it is an internal modem or is connected, verify that the interrupt for the port is properly set.
