home *** CD-ROM | disk | FTP | other *** search
- 5064 QoS Network Policy Manager Extension
- 30000 &Create new policy ...
- 30001 Policy-based QoS
- 30002 &Edit existing policy ...
- 30003 Edit an existing QoS policy
- 30004 &Delete policy
- 30005 Delete an existing QoS policy
- 30006 &Advanced QoS settings ...
- 30007 Advanced QoS Settings
- 40000 Policy Name
- 40001 Protocol
- 40002 Application Name
- 40003 Source Port
- 40004 Destination Port
- 40005 Source IP / Prefix Length
- 40006 Destination IP / Prefix Length
- 40007 DSCP Value
- 40008 Throttle Rate
- 40010 KBps
- 40011 MBps
- 40012 TCP
- 40013 UDP
- 40014 TCP and UDP
- 40020 Port number(s) must be between 1 - 65535.
- 40021 Invalid address specified. Enter an IPv4 address or IPv6 address.
- 40022 The application name must end with exe, cannot be blank, cannot contain spaces, and cannot contain characters < > : " \ / |
- 40023 The QOS policy name already exists or is blank. Enter a new policy name.
- 40024 Enter a throttle rate between 1 - 4294967295.
- 40025 Enter a DSCP value between 0 - 63.
- 40026 The IP addresses must be both IPv4 or both IPv6.
- 40027 Fatal error happened while trying to access the registry. \n Please restart gpedit and try again.
- 40028 Invalid character at the end of the IP address string. Note that space is not allowed.
- 40029 To specify a network address, enter a prefix between 1-32 for IPv4 and 1-128 for IPv6.\nExample: 192.168.1.1/25.
- 40031 Errors while reading policies from this GPO, not all policies are displayed.
- 40032 Delete QoS Policy
- 40033 Are you sure you want to delete this policy?
- 40034 The port number or range contains invalid character(s) and/or spaces.
- 40035 The port range is invalid - the lower port number is greater than the higher port number.
- 40036 A QoS policy must specify either a DSCP value or a throttle rate.
- 50000 Policy Profile
- 50001 Application Name
- 50002 IP Addresses
- 50003 Protocol and Ports
- 50004 Inbound TCP Traffic
- 50005 DSCP Marking Override
- 50100 QoS Policy
- 50200 You must close existing QoS policy edit dialog box before you can perform this action
-