436 This wizard helps you create spanned volumes on disks.\n\nA spanned volume is made up of disk space on more than one disk. Create a spanned volume if you need a volume that is too large for a single disk. You can extend a spanned volume by adding free space from another disk.
437 This wizard helps you create striped volumes on disks.\n\nA striped volume stores data in stripes on two or more disks. A striped volume gives you faster access to your data than a simple or spanned volume.
438 This wizard helps you create mirrored volumes on disks.\n\nA mirrored volume duplicates your data on two disks. Create a mirrored volume if you want to keep two separate copies of all your information to prevent data loss.
439 This wizard helps you create RAID-5 volumes on disks.\n\nA RAID-5 volume stores data in stripes on three or more disks. It provides a way of recovering data if part of the data is lost.
440 Completing the New Spanned Volume Wizard
441 Completing the New Striped Volume Wizard
442 Completing the New Mirrored Volume Wizard
443 Completing the New RAID-5 Volume Wizard
451 Shrink %c:
452 Shrink
453 The volume you have selected to shrink does not have a recognizable file system. Shrinking this volume will erase any data that you may have stored on it. Are you sure you want to shrink this volume?
1000 DiskManagement.Control
1001 DiskManagement.PropertyPage
1002 General
1003 Disk Management
1004 ,
1005 Snap-in
1800 T&op \nContains view choices for the upper section of this window
1801 Botto&m \nContains view choices for the lower section of this window
1802 S&ettings... \nSets color, pattern, and scale settings for the graphical view
1803 &Drive Paths... \nDisplays all drive paths
1810 &Disk List \nDisplays a list of disks in the upper section of this window
1811 &Volume List \nDisplays a list of volumes in the upper section of this window
1812 &Graphical View \nDisplays a graphical view in the upper section of this window
1820 &Di&sk List \nDisplays a list of disks in the lower section of this window
1821 &Volume List \nDisplays a list of volumes in the lower section of this window
1822 &Graphical View \nDisplays a graphical view in the lower section of this window
1823 Hidde&n \nHides the lower section of this window
1900 Logical Disk Manager
1901 &New Simple Volume...
1902 &New Spanned Volume...
1903 &New Striped Volume...
1904 &New Mirrored Volume...
1905 &New RAID-5 Volume...
2001 &New Volume...
2002 Creates a volume on this dynamic disk
2003 &New Partition...
2007 &Convert to Dynamic Disk...
2008 Converts this disk to a dynamic disk; partitions and volumes on the disk are also converted
2013 &Change Drive Letter and Paths...
2014 Reassigns a volume's drive letter and drive path
2015 &Mark Partition as Active
2016 Mark the partition as the active partition
2017 &Format...
2018 Formats the volume or partition
2019 &Help
2020 Downward hatch
2021 &Delete Volume...
2022 Deletes this volume
2025 E&xtend Volume...
2026 Extends this volume onto one or more disks
2027 &Add Mirror...
2028 Adds a mirror image to this volume
2029 Repair &Volume...
2030 Regenerates this mirrored or RAID-5 volume on another disk
2031 Re&synchronize Mirror...
2032 Resynchronizes a mirrored volume
2033 &Remove Mirror...
2034 Removes one part of a mirrored volume
2035 &Properties
2036 Displays the property sheet for the volume
2037 -
2038
2039 &Open
2040 Open
2041 &Explore
2042 Explore
2043 &Break Mirrored Volume...
2044 Breaks a mirrored volume into two simple volumes
2045 &Convert to Basic Disk
2046 Ceverts an empty dynamic disk to a basic disk
2047 Cancel &Format
2048 Cancels the format operation
2049 Crosshatch
2050 Crosshatch at 45 degrees
2051 Upward hatch
2052 Horizontal hatch
2053 Vertical hatch
2054 Solid
2055 Re&generate Parity
2056 Regenerates parity for a RAID-5 volume
2057 &Rescan Disks
2058 Rescans all disks
2059 &Eject
2060 Ejects the disk
2063 &Reactivate Volume
2064 Reactivates a disabled volume
2065 Sec&ure System Partition
2066 Secures the system partition
2067 &Unsecure System Partition
2068 Unsecures the system partition
2069 Re&activate Volume
2079 &Properties
2080 Displays the disk property sheet
2081 Re&move Disk
2082 Removes the disk from system configuration
2083 &Import Foreign Disks...
2084 Imports foreign dynamic disks so they can be used on this system
2085 &Mark Partition as Inactive
2086 Makes this partition inactive
2087 &Initialize Disk
2088 Initialize this disk so that Logical Disk Manager can access it
2089 &Mark Volume as Active
2090 Marks this volume's partition as active
2091 C&onvert to MBR Disk
2092 Converts the partition style to MBR (Master Boot Record)
2093 C&onvert to GPT Disk
2094 Converts the partition style to GPT (GUI Partition Table)
2100 S&hrink Volume...
2516 Default
2517 512
2518 1024
2519 2048
2520 4096
2521 8192
2522 16K
2523 32K
2524 64K
2525 K
2529 Primary partition
2532 Extended partition
2535 Logical drive
2540 Are you sure you want to restrict system partition access to System Administrators group?\n\nThis operation will not take effect until the computer is restarted.
2541 Are you sure you want to allow all users access to the system partition?\n\nThis operation will not take effect until the computer is restarted.
2542 A change has been made to the system that requires that you restart the computer.\nDo you want to restart the computer now?
2544 extended partition
4000 Add Mirror
4001 Adding a mirror to an existing volume provides data redundancy by maintaining multiple copies of a volume's data on different disks.
4002 Adding a mirror to an existing volume provides data redundancy by maintaining multiple copies of a volume's data on different disks.
4003 Select a location for a mirror of %s.
4004 Disk,
4005 Disk,
4006 Remove Mirror
4007 Removing a mirror from this volume removes one copy of the volume's data. The volume will no longer contain redundant data.
4008 Select a disk from which to remove a mirror of %s.
4009 Disk,
4010 Initialize to MBR:
4011 Convert:
4012 Select a location for a mirror of the volume.
4013 Initialize to GPT:
4014 &Remove Mirror
4015 Select a disk from which to remove a mirror of the volume.
5019 Dynamic disk and volume management provided to Microsoft by VERITAS Software Corporation.
5020 Microsoft and VERITAS Software
5021 1.00
6000 Unknown
6001 Offline
6002 Online
6003 Missing
6004 Unknown
6005 Basic
6006 Dynamic
6007 Removable
6008 CD-ROM
6009 Disk
6010 Unknown
6011 Unallocated Space
6012 Free Space
6013 Primary Partition
6014 Logical Drive
6015 Extended Partition
6017 CD-ROM
6018 Removable
6021 A simple volume is made up of free space on a single dynamic disk. Create a simple volume if you have enough free disk space for your volume on one disk. You can extend a simple volume by adding free space from the same disk or another disk.
6022 A spanned volume is made up of disk space on more than one dynamic disk. Create a spanned volume if you need a volume that is too large for a single disk. You can extend a spanned volume by adding free space from another disk.
6023 A mirrored volume duplicates your data on two dynamic disks. Create a mirrored volume if you want to keep two separate copies of all your information to prevent data loss.
6024 A striped volume stores data in stripes on two or more dynamic disks. A striped volume gives you faster access to your data than a simple or spanned volume.
6025 A RAID-5 volume stores data in stripes on three or more dynamic disks. It provides a way of recovering data if part of the data is lost.
6027 Audio CD
6028 Not Initialized
6029 free space
6502 Unknown
6503 Healthy
6504 Failed
6505 Failed Redundancy
6508 Resynching
6509 Regenerating
6510 Initializing
6511 Unknown
6512 MBR
6513 GPT
6514 Not Applicable
6515 Master Boot Record (MBR)
6516 GUID Partition Table (GPT)
6517 (BitLocker Encrypted)
7503 Connect To Logical Disk Manager Server
7504 Logical Disk Manager Server is not yet ready to accept connections\nDo you want to continue to wait?
40004 Cannot mirror more than two disks.
40005 Cannot span more than one disk for a simple volume
40007 The label contains characters that are not valid. Specify a different label.
40008 Formatting this volume will erase all data on it. Back up any data you want to keep before formatting. Do you want to continue?
40009 The drive letter %c: is already mapped to a network share or a local path. In order to see the volume after the operation, you must remove current mapping.\n\nDo you want to continue?
40010 Deleting this volume will erase all data on it. Back up any data you want to keep before deleting. Do you want to continue?
40011 Delete %s
40013 Logical Disk Manager cannot get the local computer name.
40014 Convert Disk to Dynamic
40015 File systems on any of the disks to be converted will be dismounted.\n\nDo you want to continue this operation?
40016 Windows cannot find the Help file.\n Install Diskmgmt.chm in the Help folder located in your Windows folder.
40017 The operation was canceled due to an internal error.
40018 The operation timed out.
40019 The folder you specified is not empty. A volume can be mounted only at an empty folder.
40020 A volume cannot be mounted at a root directory.
40021 Cannot start Virtual Disk Service(VDS) on %s.\nVDS supports Windows 2003, IA64 XP or later.\nUse Terminal Service for non-VDS machine.
53235 This operation will make the volume available for use but the data on it may be corrupted or stale. If you have another disk that contains part of this volume, reconnect it to this machine and reactivate the volume from that disk. If you choose to continue with this reactivate, it is recommended that chkdsk be run on this volume before using it. If chkdsk fails or finds an excessive number of errors, you may need to reformat the volume and restore its contents from backup.\n\n Do you want to continue?
53238 Select Partition Type
53239 There are three types of partitions: primary, extended, and logical.
53240 Specify Volume Size
53241 Choose a volume size that is between the maximum and minimum sizes.
53242 Assign Drive Letter or Path
53243 For easier access, you can assign a drive letter or drive path to your partition.
53244 Format Partition
53245 To store data on this partition, you must format it first.
53246 Select Computer
53247 You can use this MMC console snap-in to manage this computer, or you can target another computer.
53248 Select Disks to Initialize
53249 You must initialize a disk before Logical Disk Manager can access it.
53250 Select Disks to Convert
53251 The disks you select will be converted to dynamic disks.
53258 Select Volume Type
53259 There are five types of volumes: simple, spanned, striped, mirrored, and RAID-5.
53260 Select Disks
53261 You can select the disks and set the disk size for this volume.
53262 Assign Drive Letter or Path
53263 For easier access, you can assign a drive letter or drive path to your volume.
53266 Select Disks
53267 You can use space on one or more disks to extend the volume.
53269 Format Volume
53270 To store data on this volume, you must format it first.
53271 Select the dynamic disks you want to use, and then click Add.
53273 S&elect the amount of space on each selected disk in MB:
53274 S&elect the amount of space on each disk in MB:
53275 You can only use the disk in selected list.
53276 Select the disk you want to use, and then click Add.
53277 Select the disks you want to use, and then click Add.
53278 Select the disks you want to use, and then click Add.
53279 Select the disks you want to use, and then click Add.
53280 S&elect the amount of space on the selected disk in MB:
53281 Creating the %s has modified the partition number of the partition that contains your Windows system files.\nThe old partition number was %u; the new partition number is %u.\n\nYou must edit the Boot.ini file to reflect this change, then restart your computer immediately. If you do not do this, you will not be able to subsequently restart your machine.
53282 Creating the %s has modified the partition number of the partition that contains your Windows system files.\nThe old partition number was %u; the new partition number is %u.\n\nYou must restart your computer and use the Setup Utility to change the operating system selection. You will not be able to subsequently restart your computer unless this is done.
53283 Deleting the %s has modified the partition number of the partition that contains your Windows system files.\nThe old partition number was %u; the new partition number is %u.\n\nYou must edit the Boot.ini file to reflect this change, and then restart your computer immediately. If you do not do this, you will not be able to subsequently restart your computer.
53284 Deleting the %s has modified the partition number of the partition that contains your Windows system files.\nThe old partition number was %u; the new partition number is %u.\n\nYou must restart your computer and use the Setup utility to change the operating system selection. You will not be able to subsequently restart your computer unless this is done.
53285 Converting a disk has modified the partition number of the volume that contains your Windows system files.\nThe old partition number was %u; the new partition number is %u.\n\nYou must edit the Boot.ini file to reflect this change, and then restart your computer immediately. If you do not do this, you will not be able to subsequently restart your computer.
53286 Unrecognized
53287 Foreign
53288 No Media
53289 Unreadable
53290 Initializing
53291 Online (Errors)
53292 Unknown
53293 Dynamic
53294 Basic
53295 CD-ROM
53296 Removable
53297 DVD
53298 New Volume
53299 Format %c:
53300 Add a new drive letter or path for %s.
53301 Enter a new drive letter or path for %s.
53302 Converting a disk has modified the partition number of the volume that contains your Windows system files.\nThe old partition number was %u; the new partition number is %u.\n\nYou must restart your computer and use the Setup utility to change the operating system selection. You will not be able to subsequently restart your computer until this is done.
53303 Add Drive Letter or Path
53304 Change Drive Letter or Path
53305 Change Drive Letter and Paths for %s
53306 Users will no longer be able to access files by using this path. Are you sure you want to remove this drive path?
53307 Confirm
53308 Format
53310 R&eactivate Disk
53311 Reactivates this disk
53312 &Delete Partition...
53314 Volume,Capacity,
53315 Name
53316 %s Properties
53317 This volume is in use. If you continue this operation, the part of the volume you break off may not contain the latest data on the volume. Do you want to continue?
53318 MB
53320 FAT
53321 NTFS
53322 FAT32
53324 UNKNOWN
53326 Disk
53329 Data on this disk will be lost if you convert the disk to basic. Do you want to continue?
53330 Formatting has already been completed.
53332 Break Mirrored Volume
53333 Confirm
53336 Warning
53337 Converting this disk requires you to edit the Boot.ini file after restarting the computer to ensure the correct partition numbers are used. After restarting the computer, you must start the Logical Disk Manager to get the information needed to make these changes.\n\n Do you want to continue?
53347 The volume %s is currently in use.\n If you continue, the drive letter will be freed; however, it will still be available for use until you restart the computer.\n\nWARNING: Changing the drive letter of a volume might cause programs to no longer run.\nDo you want to continue?
53348 SCSI
53352 IDE
53361 %d of %d disks
53364 Volume type:
53365 Black
53366 White
53367 Brick
53368 Green
53369 Olive
53370 Dark Blue
53371 Purple
53372 Cadet Blue
53373 Light Gray
53374 Dark Gray
53375 Red
53376 Light Green
53377 Yellow
53378 Blue
53379 Light Purple
53380 Cyan
53381 Unallocated
53382 Disks selected:
53383 Volume size:
53384 Free space
53385 Simple volume
53386 Spanned volume
53387 Striped volume
53388 Mirrored volume
53389 RAID-5 volume
53390 Connecting to Virtual Disk Service...
53391 Drive letter or path:
53392 File system:
53393 Enable file and folder compression:
53394 Unknown Volume
53395 None
53396 Unable to connect to Virtual Disk Service
53397 Connected to Virtual Disk Service
53398 Still connecting, please wait ...
53401 Item
53402 If you break the mirrored volume, your data will no longer be fault tolerant. Do you want to continue?
53403 CDFS
53404 Formatting
53406 Microsoft
53407 Disk selected:
53409 Volume Set
53410 Simple Volume
53411 Spanned Volume
53412 System
53413 Page File
53414 Active
53415 EISA Configuration
53416 OS/2 Boot Partition
53417 At Risk
53419 Yes
53420 No
53421 Dynamic
53422 Basic
53423 Volume
53424 Region
53425 Striped Volume
53426 Mirrored Volume
53427 The volume %s is currently in use.\nIf you continue, the new drive letter will be assigned, but you can still use the old drive letter to access the volume until you restart your computer. The old drive letter will not be available for assignment until you restart.\n\nWARNING: Changing the drive letter of a volume might cause programs to no longer run.\nDo you want to continue?
53428 Settings
53429 Quick format:
53430 Data incomplete
53431 Allocation unit size:
53432 Data not redundant
53433 Type,Condition,Size,
53434 Default
53435 simple volume
53436 Stale data
53437 OK
53438 Re&fresh
53439 Refresh disk and volume views
53440 An internal error occurred. Restart the Disk Management snap-in.
53441 unallocated
53442 This command is not supported.
53443 You do not have access rights to Logical Disk Manager on %s.
53444 Virtual Disk Service (VDS) is not registered. \nVDS supports Windows 2003 or later. \nCheck the operating system version on the computer named %s.
53445 (Imported)
53446 Logical Disk Manager is unavailable on %s. It may have stopped running, or there may be a network problem. Do you want to try to reconnect?
53447 Name,Disk Contents,Will Convert,
53448 Logical Disk Manager cannot proceed with the conversion. %s
53449 At least one disk does not have enough free space to perform the conversion. Check the space on the disks and clear space where possible before trying this again.
53450 Logical Disk Manager detected an active partition that was not the one from which this system was started.
53451 Logical Disk Manager cannot determine the partition type of a partition on a disk. To continue the conversion, you must first remove the unrecognized partition.
53452 Logical Disk Manager detected an unhealthy region on a basic volume. If the volume is initializing or regenerating, it will become healthy when it completes the operation. If the volume is an outdated mirror, resynchronize it with the volume it is mirroring.
53453 Logical Disk Manager cannot get information about an existing basic volume.
53454 Conversion of a basic RAID-5 volume is not yet supported.
53455 Conversion of a boot disk containing part of a basic volume is not yet supported.
53456 The conversion will force reboot your system.\nWant continue?
53457 RAID-5 Volume
53458 To complete the conversion process, the computer will now restart.
53459 Repair of the basic volume was unsuccessful. A partition cannot be created on the disk region you selected.
53461 Name,Region,
53462 &Volume...
53463 Create a volume on this dynamic disk.
53464 &Partition...
53467 Unable to create directory.
53469 You must enter a path as your drive path.
53472 Refresh
53473 Delete
53474 Properties
53475 Open
53476 Explore
53477 This %s will not be compatible with previous versions of Microsoft Windows because the FAT file system has an allocation unit size greater than 32K.\n\n To continue, click OK.
53478 partition
53479 volume
53480 Graphical Settings...
53481 Windows cannot delete the partition that contains your Windows system files.
53482 This is the active partition on this disk. All data on the partition will be lost. Are you sure you want to delete this partition?
53483 Windows cannot delete the system volume on this disk.
53484 Windows cannot delete the volume that contains your Windows system files.
53485 Windows cannot format the partition that contains your Windows system files.
53486 This is the active partition on this disk. All data on the partition will be lost. Are you sure you want to format this partition?
53487 Windows cannot format the volume that contains your Windows system files.
53488 Windows cannot format the system volume on this disk.
53489 Windows cannot delete the active system partition on this disk.
53490 Windows cannot format the system partition on this disk.
53491 Drive Path,Volume,
53492 This is an extended partition. The partition will become inaccessible if you delete it. Are you sure you want to delete this partition?
53493 One of the disks in the disk set has a basic volume that is in use.
53494 <not accessible>
53495 Boot
53496 WARNING: Some programs that rely on drive letters might not run correctly. Do you want to continue?
53497 Some programs that rely on drive letters might not run correctly. Are you sure you want to remove this drive letter?
53498 Some programs that rely on drive letters might not run correctly. Do you want to continue?
53499 No Volumes
53500 in use
53502 Yes
53503 No
53504 (Local)
53505 Basic volume in use
53506 New Folder
53507 Creating this partition will change the number of the partition that contains your Windows system files. After creating the partition, you will need to edit the Boot.ini file to reflect this change, and then restart your computer. Do you want to continue?
53508 Creating this partition will change the number of the partition that contains your Windows system files. After creating the partition, you will need to restart your computer and use the Setup utility to change the operating system selection. Do you want to continue?
53509 Deleting this partition will change the number of the partition that contains your Windows system files. After deleting the partition, you will need to edit the Boot.ini file to reflect this change, and then restart your computer. Do you want to continue?
53510 Deleting this partition will change the number of the partition that contains your Windows system files. After deleting the partition, you will need to restart your computer and use the Setup utility to change the operating system selection. Do you want to continue?
53511 No free space in partition
53512 From computer %s
53513 volume set
53514 Foreign disk group
53515 FIBRE
53516 USB
53517 SSA
53518 1394
53520 You have mirrored your boot volume. To be able to boot from the mirror disk, use the Setup utility to add an operating system election.
53521 Some of the volumes you are importing will lose data because you have not moved all your disks to this system. Are you sure you want to continue?
53522 These disks have conflicting information about the volumes contained on them. Review the list of volumes that will be imported if you continue. If the list is incorrect, restart the import operation and select a different set of disks.
53523 Some of the volumes you are importing have stale data since you have not moved all of your disks to this system. Are you sure you want to continue?
53524 The operation you selected will convert the selected basic disk(s) to dynamic disk(s). If you convert the disk(s) to dynamic, you will not be able to start installed operating systems from any volume on the disk(s) (except the current boot volume). Are you sure you want to continue?
53525 The disks that will be made dynamic are shown in the following list.
53526 The disks that will be made dynamic are shown in the following list. More disks are listed than you had selected to convert.
53527 Only the empty disks you selected will be converted to dynamic. %s
53528 You can use dynamic disks to create software-based volumes that can be mirrored, or they can be striped or spanned across multiple disks. You can also expand single-disk and spanned volumes without having to restart the computer.
53529 We recommend that you run chkdsk on each volume that becomes available for use after this operation. After this disk is online, if a volume remains unavailable, select the Reactivate Volume command for that volume.
53530 We recommend that you run chkdsk on this volume after it becomes available for use.
53531 Settings
53532 Are you sure you want to remove the mirror?
53534 Disk List
53535 Volume List
53536 Graphical View
53537 %s + %s
53538 MB
53539 GB
53540 Crash Dump
53541 This volume contained Windows system files but is not the current boot volume. All data on this volume will be lost. Are you sure you want to delete this volume?
53542 This volume contained Windows system files but is not the current boot volume. All data on this volume will be lost. Are you sure you want to format this volume?
53543 Loading disk configuration information...
53544 %d %%
53545 %s (%c:)
53546 After you convert these disks to dynamic, you will not be able to start installed operating systems from any volume on these disks (except the current boot volume).\n\nAre you sure you want to convert?
53548 Windows cannot open the computer selection dialog box.
53549 The eject command could not be completed because access is denied. Make sure you have access permission to the device.
53550 Windows cannot eject this media.
53551 The eject command could not be completed.
53552 0123456789
53553 The volume %s is currently in use. To force the format of this volume, click Yes.\n\nWARNING: Forcing a format might cause unexpected errors in the application that is using this volume. Do you want to continue?
53554 The partition %s is currently in use. To force the deletion of this partition, click Yes. \n\nWARNING: Forcing a deletion might cause unexpected errors in the application that is using this partition. Do you want to continue?
53555 The volume %s is currently in use. To force the deletion of this volume, click Yes.\n\nWARNING: Forcing a deletion might cause unexpected errors in the application that is using this volume. Do you want to continue?
53556 The volume %s is currently in use. To forcibly extend this volume, click Yes.\n\nWARNING: Forcibly extending a volume might cause unexpected errors in the application that is using the volume.
53557 Windows cannot modify the drive letter of your volume. This may happen if your volume is a system or boot volume, or has page files.
53558 Windows cannot remove the drive letter of your volume. This may happen if your volume is a system or boot volume, or has page files.
53560 Unknown
53562 Volume type:
53563 Volume size:
53564 MS Shell Dlg 2
53565 12
53566 MS Shell Dlg 2
53567 8
53568 Volume label:
53569 This volume has an active paging file.
53570 This partition has an active paging file.
53571 Marking an FT (fault tolerant) volume active will only mark underlying partitions active if they are primary partitions. Logical drives will not be marked active.
53572 The selected volume is a system or boot disk or was created on a basic disk in an earlier version of Windows and cannot be extended.
53573 Extend Volume
53574 The Logical Disk Manager service is disabled. A connection cannot be established.
53575 simple volume
53576 spanned volume
53577 striped volume
53579 mirrored volume
53580 RAID-5 volume
53581 You chose to mirror a boot volume that is not current on a disk with a different partition style. If you continue, you will not be able to boot from the new mirror. Do you want to continue?
53582 You cannot mirror the current boot volume on another disk with a different partition style.
53583 Conversion of a GPT (GUID Partition Table) disk containing basic partitions mixed with non-basic partitions to dynamic is not yet supported.
53584 You have mirrored your system volume. Because the new member of the volume does not have the same start position, you cannot boot from the mirror disk.
53585 Disk drives
53586 (Standard disk drives)
53587 Port %d, Target ID %d, LUN %d
53588 \n\nIf you are having problems with this device, click Troubleshooter.
53589 This device is working properly.
53590 This device is not online.
53591 System Partition
53592 Boot Partition
53593 Active Partition
53594 Partition in use
53595 Changing the active partition on a disk might make the disk not startable if the partition does not have valid system files. Do you want to continue?
53596 Only mark a partition as active if it contains a functioning operating system. If the partition lacks an operating system, marking it active might cause your computer to stop working. Do you want to continue?
53597 Logical Disk Manager cannot open a volume on the disks to be converted.
53598 GPT Protective Partition
53599 EFI System Partition
53600 Unknown Partition
53601 The partition number of a boot partition has changed. Disk Management was unable to update Boot.ini to reflect these changes. If you do not change the number, you will not be able to restart your computer correctly.
53603 You have mirrored the boot volume. Disk Management was unable to update Boot.ini to reflect these changes. If you do not add an entry for the mirror, you will not be able to boot from the new mirror.
53604 You have removed a mirror from the boot volume. Disk Management was unable to update Boot.ini to reflect these changes.
53605 At least one boot volume partition number has changed. Open Boot.ini and check the partition number entries. If you do not change the number, you will not be able to restart your computer correctly.
53606 The Logical Disk Manager encountered an unexpected memory problem with this computer. Restart Disk Management to open the application again.
53607 You have mirrored a boot volume. Disk Management was unable to update Boot.ini to reflect these changes. If you do not add an entry for the mirror, you will not be able to boot from the new mirror.
53608 You have removed a mirror from a boot volume. Disk Management was unable to update Boot.ini to reflect these changes.
53610 Hibernation Partition
53611 The selected partition was not created by Windows and might contain data recognized by other operating systems. Do you want to delete this partition?
53612 The partition number of a boot partition has changed. Disk Management was unable to update NVRAM to reflect these changes. If you do not change the number, you will not be able to restart your computer correctly.
53613 You have mirrored the boot volume. Disk Management was unable to update NVRAM to reflect these changes. If you do not add an entry for the mirror, you will not be able to boot from the new mirror.
53614 You have removed a mirror from the boot volume. Disk Management was unable to update NVRAM to reflect these changes.
53615 At least one boot volume partition number has changed. Use the machine's firmware utility to check the partition number entries. If you do not change the number, you will not be able to restart your computer correctly.
53616 You have mirrored a boot volume. Disk Management was unable to update NVRAM to reflect these changes. If you do not add an entry for the mirror, you will not be able to boot from the new mirror.
53617 You have removed a mirror from a boot volume. Disk Management was unable to update NVRAM to reflect these changes.
53618 (%c:)
53619 (%c:)
53620 (%c:)
53621 Microsoft Reserved Space
53622 Basic Data Partition
53623 LDM Metadata Partition
53624 LDM Data Partition
53625 Microsoft Recovery Partition
53626 The volume selected is BitLocker encrypted. Formatting will remove the BitLocker encryption and the encrypted data on the volume. You may enable BitLocker again after formatting is complete. Are you sure you want to format the volume?
54000 Warning
54002 Extend partition is not supported on target machine.
54050 The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by using the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart the computer.
54051 The Disk management console has encountered an unrecoverable error. Close the Disk Management console, then restart Disk Management or restart the computer.
54052 An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer.
54053 There is not enough memory available to complete the operation. Save your work, close other programs, and then try again.
54054 The attempted operation is invalid. Either the parameters specified are invalid or the operation cannot be completed on the selected object. Refer to the Disk Management help for assistance on the correct use of the attempted operation.
54055 There is not enough space available on the disk(s) to complete this operation.
54056 The attempted operation cannot be completed. This operation is not valid on volumes containing system partition, boot partition or pagefiles.
54057 The attempted operation failed. The selected object has been deleted. Refresh the view by using the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart the computer.
54058 The operation cannot be cancelled.
54059 The operation cannot be completed because selected disk(s) are unallocated disk(s).
54060 The operation cannot be completed because the disk is not initialized.
54061 Quick format cannot be done on the selected volume.
54062 The attempted operation could not be completed. Some other operations are in progress on the selected object. Retry after sometime.
54063 The operation cannot be completed because the disk is not empty.
54064 A corrupt notification was received. Refresh the view by using the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart the computer.
54065 The attempted operation cannot be completed. The selected media is write protected.
54066 Disk management failed to enable compression on the selected volume.
54067 The attempted operation cannot be completed. The selected volume is not a mirrored volume.
54068 The operation cannot be completed because the disk is being cleaned.
54069 The mount path for the volume could not be removed.
54070 The attempted operation cannot be completed. The number of disks for the selected volume has exceeded the maximum allowable limit.
54071 The operation cannot be completed because the disk is not online.
54072 The attempted operation cannot be completed. The selected volume is not mounted.
54073 A defragmentation or volume shrink operation is already in progress. Only one of these operations can run at a time. Wait until the current process finishes and then try again.
54074 The volume could not be formatted because BitLocker encryption could not be disabled on the volume.
54500 The boot configuration data of the system could not be updated. Use bcdedit.exe to update it manually. Note that bcdedit.exe is not available on Windows 2003 Server. Edit boot.ini or use bootcfg.exe instead.
54501 The volume was created successfully but it was not assigned an access path. Retry assigning the access path by using the change drive letters and paths task.
54502 The volume was created successfully but it was not formatted. Retry the format using the format task.
54503 You have mirrored a boot volume to an MBR disk. You will not be able to boot from the MBR disk.
54504 You have mirrored a boot volume to a GPT disk. You will not be able to boot from the GPT disk.
54505 The volume you have selected to shrink may be corrupted. Use Chkdsk to fix the corruption problem, and then try to shrink the volume again.
57000 You can only extend the volume to the available space shown below because your disk cannot be converted to dynamic or the volume being extended is a boot or system volume.
57008 The volume you selected to delete has been encrypted with BitLocker Drive Encryption. If you delete the volume, all data will be lost. Are you sure that you want to delete the volume?
