5 View and update your hardware's settings and driver software.
6 Class
8 Device
10 Computer
12 Unable to access the computer %s\nMake sure that this computer is on the network, has remote administration enabled,\nand is running the "Plug and Play" and "Remote registry" services.\n\nThe error was: %s
952 Warning: You are about to uninstall this device from your system.
953 Uninstalling devices...
959 D&evices by type
960 De&vices by connection
961 Resources by t&ype
962 Resources by co&nnection
969 Interrupt request (IRQ)
970 Direct memory access (DMA)
971 Input/output (IO)
972 Memory
981 Device Manager extension
982 #To finish removing your hardware, you must restart your computer.\n\nDo you want to restart your computer now?
983 #Your hardware settings have changed. You must restart your computer for these changes to take effect.\n\nDo you want to restart your computer now?
984 #You must shut down Windows and TURN YOUR COMPUTER OFF to continue setting up this PCMCIA device.\n\n
985 Would you like to shut down your computer now?
986 Device Manager on %s
989 local computer
990 Sho&w hidden devices
991 The system does not have enough memory for this program to carry out the operation Please close one or more other applications to increase available memory.
992 Not digitally signed
1000 This device is not configured correctly.%s
1001 Windows cannot load the driver for this device.%s
1002 The driver for this device might be corrupted, or your system may be running low on memory or other resources.%s
1003 This device is not working properly. One of its drivers or your registry might be corrupted.%s
1004 The driver for this device needs a resource that Windows cannot manage.%s
1005 The boot configuration for this device conflicts with other devices.%s
1006 Cannot filter.%s
1007 The driver loader for the device is missing.%s
1008 Windows cannot identify this hardware because it does not have a valid hardware identification number.%s\n\nFor assistance, contact the hardware manufacturer.
1009 This device cannot start.%s
1010 This device failed.%s
1011 This device cannot find enough free resources that it can use.%s\n\nIf you want to use this device, you will need to disable one of the other devices on this system.
1012 Windows cannot verify this device's resources.%s
1013 This device cannot work properly until you restart your computer.%s
1014 This device is not working properly because there is probably a reenumeration problem.%s
1015 Windows cannot identify all the resources this device uses.%s
1016 This device is asking for an unknown resource type.%s
1017 Reinstall the drivers for this device.%s
1018 Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.%s
1019 Windows is uninstalling this device.%s
1020 This device is disabled.%s
1021 This device is not present, is not working properly, or does not have all its drivers installed.%s
1022 Windows is still setting up this device.%s
1023 Windows is still setting up this device.%s
1024 This device does not have valid log configuration.%s
1025 The drivers for this device are not installed.%s
1026 This device is disabled because the firmware of the device did not give it the required resources.%s
1027 This device is using an Interrupt Request (IRQ) resource that another device is using.%s
1028 System failure: Try changing the driver for this device. If that doesn't work, see your hardware documentation.%s
1030 This device is working properly.
1031 This device has a problem, but Windows cannot determine what the problem is.
1032 This device has a problem that Windows cannot identify.%s
1035 (Code %d)
1037 No drivers are installed for this device.
1038 This device is no longer functioning properly and may need to be replaced. Contact the manufacturer of this device for assistance.
1039 Status is not available for this device when Windows is running in Safe Mode.
1040 You cannot uninstall the device while it has a property sheet attached to it.\n Choosing OK will bring the property sheet to the foreground.
1042 Device Manager has its own General page. The page is not replaceable.
1044 Device Problems Troubleshooting Wizard
1052 A driver (service) for this device has been disabled. An alternate driver may be providing this functionality.%s
1053 Windows cannot determine which resources are required for this device.%s
1054 Windows cannot determine the settings for this device. Consult the documentation that came with this device and use the Resource tab to set the configuration.%s
1055 Your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update.%s
1056 This device is requesting a PCI interrupt but is configured for an ISA interrupt (or vice versa). Please use the computer's system setup program to reconfigure the interrupt for this device.%s
1061 Cannot uninstall this device because its descendants refused the request. This can happen if the device's descendants are required to boot up the computer.
1062 Windows was not able to uninstall this device because your computer might not start without it.
1333 \n\nClick Enable Device to enable this device.
1335 \n\nClick Restart Computer to restart your computer.
1336 \n\nTo reinstall the drivers for this device, click Reinstall Driver.
1339 \n\nClick 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
1340 \n\nIf you are having problems with this device, click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
1342 E&nable Device
1344 Restart &Computer...
1345 Re&install Driver...
1347 &Check for solutions...
1353 Microsoft Corporation
1355 You can use Device Manager to view a list of hardware devices installed on your computer and set properties for each device.
1356 About Device Manager
1357 You do not have sufficient security privileges to uninstall devices or to change device properties or device drivers. Please contact your site administrator, or logout and log in again as an administrator and try again.
1358 Device Manager is running in read-only mode because you are running it on a remote computer.
1359 This device is not working properly because Windows cannot load the drivers required for this device.%s
1362 Devices(view by type) on %s
1363 Devices(view by connection) on %s
1364 Resources(view by type) on %s
1365 Resources(view by connection) on %s
1375 To uninstall devices or to change device properties or drivers, you must run Device Manager on the computer where you wish to make changes.
1385 Displays devices by hardware type.
1386 Displays devices by connection.
1387 Displays resources by type.
1388 Displays resources by connection.
1389 Displays legacy devices and devices that are no longer installed.
1390 Scan for changed or new Plug and Play devices.
1392 Uninstalls the driver for the selected device.
1393 Opens property sheet for the current selection.
1394 Enables the selected device.
1395 Disables the selected device.
1396 Launches the Update Driver Software Wizard for the selected device.
1397 Add a legacy (non Plug and Play) device to the computer.
1398 Disabling this device will cause it to stop functioning. Do you really want to disable it?
1400 %s
1402 on %s
1405 Location %1!u!
1407 No driver files are required or have been loaded for this device.
1507 Enabling a device
1508 Do you want to enable this device?
1509 Enabling a device
1510 Windows has finished attempting to enable this device.
1511 Windows successfully enabled this device.
1512 Windows was not able to enable this device.
1513 You will need to restart the computer to finish enabling this device.
1514 Windows successfully enabled this device, however, this device is still not working properly.
1515 Restart your computer
1516 Windows will now restart your computer.
1517 \n\nYou need to restart your computer before the changes you made to this device will take effect.
1518 \n\nThe drivers for this device will be uninstalled when the machine is restarted. Any changes you make to this device will not be preserved.
1519 (PCI)
1520 (ISA)
1521 Use this device (enable)
1522 Do not use this device (disable)
1525 You cannot update the driver for this device at this time because it is in the process of being uninstalled.\n\n
1526 You cannot roll back the driver for this device at this time because it is in the process of being uninstalled.\n\n
1527 You cannot change the settings of this device at this time because it is in the process of being uninstalled.\n\n
1528 \n\nWindows did not start a related device driver. To learn more, click the Driver tab and then click Driver Details.
1529 There is a secondary device connected to this hardware that Windows cannot identify because it does not have a valid hardware identification number.\n\nFor assistance, contact the hardware manufacturer.
1537 Manufacturer: %s
1538 Location: %s
1539 Device Status: %s
1540 Name
1541 Type
1600 Windows cannot initialize the device driver for this hardware.%s
1601 Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory.%s
1602 Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.%s
1603 Windows cannot access this hardware because its service key information in the registry is missing or recorded incorrectly.%s
1604 Windows successfully loaded the device driver for this hardware but cannot find the hardware device.%s
1605 Windows cannot load the device driver for this hardware because there is a duplicate device already running in the system.%s
1606 Windows has stopped this device because it has reported problems.%s
1607 An application or service has shut down this hardware device.%s
1608 Currently, this hardware device is not connected to the computer.%s\n\nTo fix this problem, reconnect this hardware device to the computer.
1609 Windows cannot gain access to this hardware device because the operating system is in the process of shutting down.%s\n\nThe hardware device should work correctly next time you start your computer.
1610 Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer.%s\n\nTo fix this problem, unplug this device from your computer and then plug it in again.
1611 The software for this device has been blocked from starting because it is known to have problems with Windows. Contact the hardware vendor for a new driver.%s
1612 Windows cannot start new hardware devices because the system hive is too large (exceeds the Registry Size Limit).%s\n\nTo fix this problem, you should first try uninstalling any hardware devices that you are no longer using. If that doesn't solve the problem, then you will have to reinstall Windows.
1613 Windows cannot apply all of the properties for this device. Device properties may include information that describes the device's capabilities and settings (such as security settings for example). %s\n\nTo fix this problem, you can try reinstalling this device. However, it is recommended that you contact the hardware manufacturer for a new driver.
1700 This device is working properly
1701 This device has a problem
1702 This device is disabled
1703 This device has a forced configuration
1710 &Copy
1711 Select &All
1715 This device is currently waiting on another device or set of devices to start.%s
