PC World Komputer 2010 April/PCWorld0410.iso/WindowsServerTrial/server.iso/sources/install.wim/2/Windows/System32/PerfStringBackup.INI

Null Bytes Alternating | 2008-01-19 | 603KB | 2,866 lines

[Perflib]
Base Index=1847
Last Counter=3740
Last Help=3741

[PERF_.NET CLR Data]
First Counter=3522
First Help=3523
Last Counter=3534
Last Help=3535

[PERF_.NET CLR Networking]
First Counter=3480
First Help=3481
Last Counter=3490
Last Help=3491

[PERF_.NET Data Provider for Oracle]
First Counter=3712
First Help=3713
Last Counter=3740
Last Help=3741

[PERF_.NET Data Provider for SqlServer]
First Counter=3492
First Help=3493
Last Counter=3520
Last Help=3521

[PERF_.NETFramework]
First Counter=3536
First Help=3537
Last Counter=3710
Last Help=3711

[PERF_BITS]
First Counter=2222
First Help=2223
Last Counter=2238
Last Help=2239

[PERF_ESENT]
First Counter=2268
First Help=2269
Last Counter=3228
Last Help=3229

[PERF_MSDTC]
First Counter=3230
First Help=3231
Last Counter=3256
Last Help=3257

[PERF_RemoteAccess]
First Counter=2182
First Help=2183
Last Counter=2220
Last Help=2221

[PERF_TapiSrv]
First Counter=2240
First Help=2241
Last Counter=2258
Last Help=2259

[PERF_TermService]
First Counter=3258
First Help=3259
Last Counter=3378
Last Help=3379

[PERF_usbhub]
First Counter=3444
First Help=3445
Last Counter=3478
Last Help=3479

[PerfStrings_009]
1=1847
2=System
3=The System performance object consists of counters that apply to more than one instance of a component processors on the computer.
4=Memory
5=The Memory performance object  consists of counters that describe the behavior of physical and virtual memory on the computer.  Physical memory is the amount of random access memory on the computer.  Virtual memory consists of the space in physical memory and on disk.  Many of the memory counters monitor paging, which is the movement of pages of code and data between disk and physical memory.  Excessive paging, a symptom of a memory shortage, can cause delays which interfere with all system processes.
6=% Processor Time
7=% Processor Time is the percentage of elapsed time that the processor spends to execute a non-Idle thread. It is calculated by measuring the percentage of time that the processor spends executing the idle thread and then subtracting that value from 100%. (Each processor has an idle thread that consumes cycles when no other threads are ready to run). This counter is the primary indicator of processor activity, and displays the average percentage of busy time observed during the sample interval. It should be noted that the accounting calculation of whether the processor is idle is performed at an internal sampling interval of the system clock (10ms). On todays fast processors, % Processor Time can therefore underestimate the processor utilization as the processor may be spending a lot of time servicing threads between the system clock sampling interval. Workload based timer applications are one example  of applications  which are more likely to be measured inaccurately as timers are signaled just after the sample is taken.
9=% Total DPC Time is the average percentage of time that all processors spend receiving and servicing deferred procedure calls (DPCs).  (DPCs are interrupts that run at a lower priority than the standard interrupts). It is the sum of Processor: % DPC Time for all processors on the computer, divided by the number of processors.  System: % Total DPC Time is a component of System: % Total Privileged Time because DPCs are executed in privileged mode.  DPCs are counted separately and are not a component of the interrupt count.  This counter displays the average busy time as a percentage of the sample time.
10=File Read Operations/sec
11=File Read Operations/sec is the combined rate of file system read requests to all devices on the computer, including requests to read from the file system cache.  It is measured in numbers of reads.  This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
12=File Write Operations/sec
13=File Write Operations/sec is the combined rate of the file system write requests to all devices on the computer, including requests to write to data in the file system cache.  It is measured in numbers of writes. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
14=File Control Operations/sec
15=File Control Operations/sec is the combined rate of file system operations that are neither reads nor writes, such as file system control requests and requests for information about device characteristics or status.  This is the inverse of System: File Data Operations/sec and is measured in number of operations perf second.  This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
16=File Read Bytes/sec
17=File Read Bytes/sec is the overall rate at which bytes are read to satisfy  file system read requests to all devices on the computer, including reads from the file system cache.  It is measured in number of bytes per second.  This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
18=File Write Bytes/sec
19=File Write Bytes/sec is the overall rate at which bytes are written to satisfy file system write requests to all devices on the computer, including writes to the file system cache.  It is measured in number of bytes per second.  This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
20=File Control Bytes/sec
21=File Control Bytes/sec is the overall rate at which bytes are transferred for all file system operations that are neither reads nor writes, including file system control requests and requests for information about device characteristics or status.  It is measured in numbers of bytes.  This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
23=% Total Interrupt Time is the average percentage of time that all processors spend receiving and servicing hardware interrupts during sample intervals, where the value is an indirect indicator of the activity of devices that generate interrupts. It is the sum of Processor: % Interrupt Time for of all processors on the computer, divided by the number of processors.  DPCs are counted separately and are not a component of the interrupt count.  This value is an indirect indicator of the activity of devices that generate interrupts, such as the system timer, the mouse, disk drivers, data communication lines, network interface cards and other peripheral devices.
24=Available Bytes
25=Available Bytes is the amount of physical memory, in bytes, immediately available for allocation to a process or for system use. It is equal to the sum of memory assigned to the standby (cached), free and zero page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit.
26=Committed Bytes
27=Committed Bytes is the amount of committed virtual memory, in bytes. Committed memory is the physical memory which has space reserved on the disk paging file(s). There can be one or more paging files on each physical drive. This counter displays the last observed value only; it is not an average.
28=Page Faults/sec
29=Page Faults/sec is the average number of pages faulted per second. It is measured in number of pages faulted per second because only one page is faulted in each fault operation, hence this is also equal to the number of page fault operations. This counter includes both hard faults (those that require disk access) and soft faults (where the faulted page is found elsewhere in physical memory.) Most processors can handle large numbers of soft faults without significant consequence. However, hard faults, which require disk access, can cause significant delays.
30=Commit Limit
31=Commit Limit is the amount of virtual memory that can be committed without having to extend the paging file(s).  It is measured in bytes. Committed memory is the physical memory which has space reserved on the disk paging files. There can be one paging file on each logical drive). If the paging file(s) are be expanded, this limit increases accordingly.  This counter displays the last observed value only; it is not an average.
32=Write Copies/sec
33=Write Copies/sec is the rate at which page faults are caused by attempts to write that have been satisfied by coping of the page from elsewhere in physical memory. This is an economical way of sharing data since pages are only copied when they are written to; otherwise, the page is shared. This counter shows the number of copies, without regard for the number of pages copied in each operation.
34=Transition Faults/sec
35=Transition Faults/sec is the rate at which page faults are resolved by recovering pages that were being used by another process sharing the page, or were on the modified page list or the standby list, or were being written to disk at the time of the page fault. The pages were recovered without additional disk activity. Transition faults are counted in numbers of faults; because only one page is faulted in each operation, it is also equal to the number of pages faulted.
36=Cache Faults/sec
37=Cache Faults/sec is the rate at which faults occur when a page sought in the file system cache is not found and must be retrieved from elsewhere in memory (a soft fault) or from disk (a hard fault). The file system cache is an area of physical memory that stores recently used pages of data for applications. Cache activity is a reliable indicator of most application I/O operations. This counter shows the number of faults, without regard for the number of pages faulted in each operation.
38=Demand Zero Faults/sec
39=Demand Zero Faults/sec is the rate at which a zeroed page is required to satisfy the fault.  Zeroed pages, pages emptied of previously stored data and filled with zeros, are a security feature of Windows that prevent processes from seeing data stored by earlier processes that used the memory space. Windows maintains a list of zeroed pages to accelerate this process. This counter shows the number of faults, without regard to the number of pages retrieved to satisfy the fault. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
40=Pages/sec
41=Pages/sec is the rate at which pages are read from or written to disk to resolve hard page faults. This counter is a primary indicator of the kinds of faults that cause system-wide delays.  It is the sum of Memory\\Pages Input/sec and Memory\\Pages Output/sec.  It is counted in numbers of pages, so it can be compared to other counts of pages, such as Memory\\Page Faults/sec, without conversion. It includes pages retrieved to satisfy faults in the file system cache (usually requested by applications) non-cached mapped memory files.
42=Page Reads/sec
43=Page Reads/sec is the rate at which the disk was read to resolve hard page faults. It shows the number of reads operations, without regard to the number of pages retrieved in each operation. Hard page faults occur when a process references a page in virtual memory that is not in working set or elsewhere in physical memory, and must be retrieved from disk. This counter is a primary indicator of the kinds of faults that cause system-wide delays. It includes read operations to satisfy faults in the file system cache (usually requested by applications) and in non-cached mapped memory files. Compare the value of Memory\\Pages Reads/sec to the value of Memory\\Pages Input/sec to determine the average number of pages read during each operation.
44=Processor Queue Length
45=Processor Queue Length is the number of threads in the processor queue.  Unlike the disk counters, this counter counters, this counter shows ready threads only, not threads that are running.  There is a single queue for processor time even on computers with multiple processors. Therefore, if a computer has multiple processors, you need to divide this value by the number of processors servicing the workload. A sustained processor queue of less than 10 threads per processor is normally acceptable, dependent of the workload.
46=Thread State
47=Thread State is the current state of the thread.  It is 0 for Initialized, 1 for Ready, 2 for Running, 3 for Standby, 4 for Terminated, 5 for Wait, 6 for Transition, 7 for Unknown.  A Running thread is using a processor; a Standby thread is about to use one.  A Ready thread wants to use a processor, but is waiting for a processor because none are free.  A thread in Transition is waiting for a resource in order to execute, such as waiting for its execution stack to be paged in from disk.  A Waiting thread has no use for the processor because it is waiting for a peripheral operation to complete or a resource to become free.
48=Pages Output/sec
49=Pages Output/sec is the rate at which pages are written to disk to free up space in physical memory. Pages are written back to disk only if they are changed in physical memory, so they are likely to hold data, not code. A high rate of pages output might indicate a memory shortage. Windows writes more pages back to disk to free up space when physical memory is in short supply.  This counter shows the number of pages, and can be compared to other counts of pages, without conversion.
50=Page Writes/sec
51=Page Writes/sec is the rate at which pages are written to disk to free up space in physical memory. Pages are written to disk only if they are changed while in physical memory, so they are likely to hold data, not code.  This counter shows write operations, without regard to the number of pages written in each operation.  This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
52=Browser
53=The Browser performance object consists of counters that measure the rates of announcements, enumerations, and other Browser transmissions.
54=Announcements Server/sec
55=Announcements Server/sec is the rate at which the servers in this domain have announced themselves to this server.
56=Pool Paged Bytes
57=Pool Paged Bytes is the size, in bytes, of the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used.  Memory\\Pool Paged Bytes is calculated differently than Process\\Pool Paged Bytes, so it might not equal Process\\Pool Paged Bytes\\_Total. This counter displays the last observed value only; it is not an average.
58=Pool Nonpaged Bytes
59=Pool Nonpaged Bytes is the size, in bytes, of the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated.  Memory\\Pool Nonpaged Bytes is calculated differently than Process\\Pool Nonpaged Bytes, so it might not equal Process\\Pool Nonpaged Bytes\\_Total.  This counter displays the last observed value only; it is not an average.
60=Pool Paged Allocs
61=Pool Paged Allocs is the number of calls to allocate space in the paged pool. The paged pool is an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. It is measured in numbers of calls to allocate space, regardless of the amount of space allocated in each call.  This counter displays the last observed value only; it is not an average.
63=Pool Paged Resident Bytes is the current size, in bytes, of the paged pool. The paged pool is an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Space used by the paged and nonpaged pools are taken from physical memory, so a pool that is too large denies memory space to processes. This counter displays the last observed value only; it is not an average.
64=Pool Nonpaged Allocs
65=Pool Nonpaged Allocs is the number of calls to allocate space in the nonpaged pool. The nonpaged pool is an area of system memory area for objects that cannot be written to disk, and must remain in physical memory as long as they are allocated.  It is measured in numbers of calls to allocate space, regardless of the amount of space allocated in each call.  This counter displays the last observed value only; it is not an average.
66=Pool Paged Resident Bytes
67=Bytes Total/sec is the total rate of bytes sent to or received from the network by the protocol, but only for the frames (packets) which carry data. This is the sum of Frame Bytes/sec and Datagram Bytes/sec.
68=System Code Total Bytes
69=System Code Total Bytes is the size, in bytes, of the pageable operating system code currently in virtual memory. It is a measure of the amount of physical memory being used by the operating system that can be written to disk when not in use. This value is calculated by summing the bytes in Ntoskrnl.exe, Hal.dll, the boot drivers, and file systems loaded by Ntldr/osloader.  This counter does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average.
70=System Code Resident Bytes
71=System Code Resident Bytes is the size, in bytes of the operating system code currently in physical memory that can be written to disk when not in use. This value is a component of Memory\\System Code Total Bytes, which also includes operating system code on disk. Memory\\System Code Resident Bytes (and Memory\\System Code Total Bytes) does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average.
72=System Driver Total Bytes
73=System Driver Total Bytes is the size, in bytes, of the pageable virtual memory currently being used by device drivers. Pageable memory can be written to disk when it is not being used. It includes physical memory (Memory\\System Driver Resident Bytes) and code and data paged to disk. It is a component of Memory\\System Code Total Bytes. This counter displays the last observed value only; it is not an average.
74=System Driver Resident Bytes
75=System Driver Resident Bytes is the size, in bytes, of the pageable physical memory being used by device drivers. It is the working set (physical memory area) of the drivers. This value is a component of Memory\\System Driver Total Bytes, which also includes driver memory that has been written to disk. Neither Memory\\System Driver Resident Bytes nor Memory\\System Driver Total Bytes includes memory that cannot be written to disk.
76=System Cache Resident Bytes
77=System Cache Resident Bytes is the size, in bytes, of the pageable operating system code in the file system cache. This value includes only current physical pages and does not include any virtual memory pages not currently resident. It does equal the System Cache value shown in Task Manager. As a result, this value may be smaller than the actual amount of virtual memory in use by the file system cache. This value is a component of Memory\\System Code Resident Bytes which represents all pageable operating system code that is currently in physical memory. This counter displays the last observed value only; it is not an average.
78=Announcements Domain/sec
79=Announcements Domain/sec is the rate at which a domain has announced itself to the network.
80=Election Packets/sec
81=Election Packets/sec is the rate at which browser election packets have been received by this workstation.
82=Mailslot Writes/sec
83=Mailslot Writes/sec is the rate at which mailslot messages have been successfully received.
84=Server List Requests/sec
85=Server List Requests/sec is the rate at which requests to retrieve a list of browser servers have been processed by this workstation.
86=Cache
87=The Cache performance object  consists of counters that monitor the file system cache, an area of physical memory that stores recently used data as long as possible to permit access to the data without having to read from the disk.  Because applications typically use the cache, the cache is monitored as an indicator of application I/O operations.  When memory is plentiful, the cache can grow, but when memory is scarce, the cache can become too small to be effective.
88=Data Maps/sec
89=Data Maps/sec is the frequency that a file system such as NTFS, maps a page of a file into the file system cache to read the page.
90=Sync Data Maps/sec
91=Sync Data Maps/sec counts the frequency that a file system, such as NTFS, maps a page of a file into the file system cache to read the page, and wishes to wait for the page to be retrieved if it is not in main memory.
92=Async Data Maps/sec
93=Async Data Maps/sec is the frequency that an application using a file system, such as NTFS, to map a page of a file into the file system cache to read the page, and does not wait for the page to be retrieved if it is not in main memory.
94=Data Map Hits %
95=Data Map Hits is the percentage of data maps in the file system cache that could be resolved without having to retrieve a page from the disk, because the page was already in physical memory.
96=Data Map Pins/sec
97=Data Map Pins/sec is the frequency of data maps in the file system cache that resulted in pinning a page in main memory, an action usually preparatory to writing to the file on disk.   While pinned, a page's physical address in main memory and virtual address in the file system cache will not be altered.
98=Pin Reads/sec
99=Pin Reads/sec is the frequency of reading data into the file system cache preparatory to writing the data back to disk.  Pages read in this fashion are pinned in memory at the completion of the read.  While pinned, a page's physical address in the file system cache will not be altered.
100=Sync Pin Reads/sec
101=Sync Pin Reads/sec is the frequency of reading data into the file system cache preparatory to writing the data back to disk.  Pages read in this fashion are pinned in memory at the completion of the read.  The file system will not regain control until the page is pinned in the file system cache, in particular if the disk must be accessed to retrieve the page.  While pinned, a page's physical address in the file system cache will not be altered.
102=Async Pin Reads/sec
103=Async Pin Reads/sec is the frequency of reading data into the file system cache preparatory to writing the data back to disk.  Pages read in this fashion are pinned in memory at the completion of the read.  The file system will regain control immediately even if the disk must be accessed to retrieve the page.  While pinned, a page's physical address will not be altered.
104=Pin Read Hits %
105=Pin Read Hits is the percentage of pin read requests that hit the file system cache, i.e., did not require a disk read in order to provide access to the page in the file system cache.  While pinned, a page's physical address in the file system cache will not be altered.  The LAN Redirector uses this method for retrieving data from the cache, as does the LAN Server for small transfers.  This is usually the method used by the disk file systems as well.
106=Copy Reads/sec
107=Copy Reads/sec is the frequency of reads from pages of the file system cache that involve a memory copy of the data from the cache to the application's buffer.  The LAN Redirector uses this method for retrieving information from the file system cache, as does the LAN Server for small transfers.  This is a method used by the disk file systems as well.
108=Sync Copy Reads/sec
109=Sync Copy Reads/sec is the frequency of reads from pages of the file system cache that involve a memory copy of the data from the cache to the application's buffer.  The file system will not regain control until the copy operation is complete, even if the disk must be accessed to retrieve the page.
110=Async Copy Reads/sec
111=Async Copy Reads/sec is the frequency of reads from pages of the file system cache that involve a memory copy of the data from the cache to the application's buffer.  The application will regain control immediately even if the disk must be accessed to retrieve the page.
112=Copy Read Hits %
113=Copy Read Hits is the percentage of cache copy read requests that hit the cache, that is, they did not require a disk read in order to provide access to the page in the cache.  A copy read is a file read operation that is satisfied by a memory copy from a page in the cache to the application's buffer.  The LAN Redirector uses this method for retrieving information from the cache, as does the LAN Server for small transfers.  This is a method used by the disk file systems as well.
114=MDL Reads/sec
115=MDL Reads/sec is the frequency of reads from the file system cache that use a Memory Descriptor List (MDL) to access the data.  The MDL contains the physical address of each page involved in the transfer, and thus can employ a hardware Direct Memory Access (DMA) device to effect the copy.  The LAN Server uses this method for large transfers out of the server.
116=Sync MDL Reads/sec
117=Sync MDL Reads/sec is the frequency of reads from the file system cache that use a Memory Descriptor List (MDL) to access the pages.  The MDL contains the physical address of each page in the transfer, thus permitting Direct Memory Access (DMA) of the pages.  If the accessed page(s) are not in main memory, the caller will wait for the pages to fault in from the disk.
118=Async MDL Reads/sec
119=Async MDL Reads/sec is the frequency of reads from the file system cache that use a Memory Descriptor List (MDL) to access the pages.  The MDL contains the physical address of each page in the transfer, thus permitting Direct Memory Access (DMA) of the pages.  If the accessed page(s) are not in main memory, the calling application program will not wait for the pages to fault in from disk.
120=MDL Read Hits %
121=MDL Read Hits is the percentage of Memory Descriptor List (MDL) Read requests to the file system cache that hit the cache, i.e., did not require disk accesses in order to provide memory access to the page(s) in the cache.
122=Read Aheads/sec
123=Read Aheads/sec is the frequency of reads from the file system cache in which the Cache detects sequential access to a file.  The read aheads permit the data to be transferred in larger blocks than those being requested by the application, reducing the overhead per access.
124=Fast Reads/sec
125=Fast Reads/sec is the frequency of reads from the file system cache that bypass the installed file system and retrieve the data directly from the cache.  Normally, file I/O requests invoke the appropriate file system to retrieve data from a file, but this path permits direct retrieval of data from the cache without file system involvement if the data is in the cache.  Even if the data is not in the cache, one invocation of the file system is avoided.
126=Sync Fast Reads/sec
127=Sync Fast Reads/sec is the frequency of reads from the file system cache that bypass the installed file system and retrieve the data directly from the cache.  Normally, file I/O requests invoke the appropriate file system to retrieve data from a file, but this path permits direct retrieval of data from the cache without file system involvement if the data is in the cache.  Even if the data is not in the cache, one invocation of the file system is avoided.  If the data is not in the cache, the request (application program call) will wait until the data has been retrieved from disk.
128=Async Fast Reads/sec
129=Async Fast Reads/sec is the frequency of reads from the file system cache that bypass the installed file system and retrieve the data directly from the cache.  Normally, file I/O requests will invoke the appropriate file system to retrieve data from a file, but this path permits data to be retrieved from the cache directly (without file system involvement) if the data is in the cache.  Even if the data is not in the cache, one invocation of the file system is avoided.  If the data is not in the cache, the request (application program call) will not wait until the data has been retrieved from disk, but will get control immediately.
130=Fast Read Resource Misses/sec
131=Fast Read Resource Misses/sec is the frequency of cache misses necessitated by the lack of available resources to satisfy the request.
132=Fast Read Not Possibles/sec
133=Fast Read Not Possibles/sec is the frequency of attempts by an Application Program Interface (API) function call to bypass the file system to get to data in the file system cache that could not be honored without invoking the file system.
134=Lazy Write Flushes/sec
135=Lazy Write Flushes/sec is the rate at which the Lazy Writer thread has written to disk.  Lazy Writing is the process of updating the disk after the page has been changed in memory, so that the application that changed the file does not have to wait for the disk write to be complete before proceeding.  More than one page can be transferred by each write operation.
136=Lazy Write Pages/sec
137=Lazy Write Pages/sec is the rate at which the Lazy Writer thread has written to disk.  Lazy Writing is the process of updating the disk after the page has been changed in memory, so that the application that changed the file does not have to wait for the disk write to be complete before proceeding.  More than one page can be transferred on a single disk write operation.
138=Data Flushes/sec
139=Data Flushes/sec is the rate at which the file system cache has flushed its contents to disk as the result of a request to flush or to satisfy a write-through file write request.  More than one page can be transferred on each flush operation.
140=Data Flush Pages/sec
141=Data Flush Pages/sec is the number of pages the file system cache has flushed to disk as a result of a request to flush or to satisfy a write-through file write request.  More than one page can be transferred on each flush operation.
142=% User Time
143=% User Time is the percentage of elapsed time the processor spends in the user mode. User mode is a restricted processing mode designed for applications, environment subsystems, and integral subsystems.  The alternative, privileged mode, is designed for operating system components and allows direct access to hardware and all memory.  The operating system switches application threads to privileged mode to access operating system services. This counter displays the average busy time as a percentage of the sample time.
144=% Privileged Time
145=% Privileged Time is the percentage of elapsed time that the process threads spent executing code in privileged mode.  When a Windows system service in called, the service will often run in privileged mode to gain access to system-private data. Such data is protected from access by threads executing in user mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process.
146=Context Switches/sec
147=Context Switches/sec is the combined rate at which all processors on the computer are switched from one thread to another.  Context switches occur when a running thread voluntarily relinquishes the processor, is preempted by a higher priority ready thread, or switches between user-mode and privileged (kernel) mode to use an Executive or subsystem service.  It is the sum of Thread\\Context Switches/sec for all threads running on all processors in the computer and is measured in numbers of switches.  There are context switch counters on the System and Thread objects. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
148=Interrupts/sec
149=Interrupts/sec is the average rate, in incidents per second, at which the processor received and serviced hardware interrupts. It does not include deferred procedure calls (DPCs), which are counted separately. This value is an indirect indicator of the activity of devices that generate interrupts, such as the system clock, the mouse, disk drivers, data communication lines, network interface cards, and other peripheral devices. These devices normally interrupt the processor when they have completed a task or require attention. Normal thread execution is suspended. The system clock typically interrupts the processor every 10 milliseconds, creating a background of interrupt activity. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
150=System Calls/sec
151=System Calls/sec is the combined rate of calls to operating system service routines by all processes running on the computer. These routines perform all of the basic scheduling and synchronization of activities on the computer, and provide access to non-graphic devices, memory management, and name space management. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
152=Level 1 TLB Fills/sec
153=Level 1 TLB Fills/sec is the frequency of faults that occur when reference is made to memory whose Page Table Entry (PTE) is not in the Translation Lookaside Buffer (TLB).  On some computers this fault is handled by software loading the PTE into the TLB, and this counter is incremented.
154=Level 2 TLB Fills/sec
155=Level 2 TLB Fills/sec is the frequency of faults that occur when reference is made to memory whose Page Table Entry (PTE) is not in the Translation Lookaside Buffer (TLB), nor is the page containing the PTE.  On some computers this fault is handled by software loading the PTE into the TLB, and this counter is incremented.
156=Enumerations Server/sec
157=% User Time is the percentage of elapsed time that the process threads spent executing code in user mode. Applications, environment subsystems, and integral subsystems execute in user mode. Code executing in user mode cannot damage the integrity of the Windows executive, kernel, and device drivers. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process.
158=Enumerations Domain/sec
159=% Privileged Time is the percentage of elapsed time that the process threads spent executing code in privileged mode. When a Windows system service is called, the service will often run in privileged mode to gain access to system-private data. Such data is protected from access by threads executing in user mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process.
160=Enumerations Other/sec
161=Enumerations Server/sec is the rate at which server browse requests have been processed by this workstation.
162=Missed Server Announcements
163=Enumerations Domain/sec is the rate at which domain browse requests have been processed by this workstation.
164=Missed Mailslot Datagrams
165=Enumerations Other/sec is the rate at which browse requests processed by this workstation are not domain or server browse requests.
166=Missed Server List Requests
167=Missed Server Announcements is the number of server announcements that have been missed due to configuration or allocation limits.
168=Server Announce Allocations Failed/sec
169=Missed Mailslot Datagrams is the number of Mailslot Datagrams that have been discarded due to configuration or allocation limits.
170=Mailslot Allocations Failed
171=Missed Server List Requests is the number of requests to retrieve a list of browser servers that were received by this workstation, but could not be processed.
172=Virtual Bytes Peak
173=Virtual Bytes Peak is the maximum size, in bytes, of virtual address space the process has used at any one time. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. However, virtual space is finite, and the process might limit its ability to load libraries.
174=Virtual Bytes
175=Virtual Bytes is the current size, in bytes, of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and the process can limit its ability to load libraries.
177=Page Faults/sec is the rate at which page faults by the threads executing in this process are occurring.  A page fault occurs when a thread refers to a virtual memory page that is not in its working set in main memory. This may not cause the page to be fetched from disk if it is on the standby list and hence already in main memory, or if it is in use by another process with whom the page is shared.
178=Working Set Peak
179=Working Set Peak is the maximum size, in bytes, of the Working Set of this process at any point in time. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory.
180=Working Set
181=Working Set is the current size, in bytes, of the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use.  When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before leaving main memory.
182=Page File Bytes Peak
183=Page File Bytes Peak is the maximum amount of virtual memory, in bytes, that this process has reserved for use in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files.  Paging files are shared by all processes, and the lack of space in paging files can prevent other processes from allocating memory. If there is no paging file, this counter reflects the maximum amount of virtual memory that the process has reserved for use in physical memory.
184=Page File Bytes
185=Page File Bytes is the current amount of virtual memory, in bytes, that this process has reserved for use in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and the lack of space in paging files can prevent other processes from allocating memory. If there is no paging file, this counter reflects the current amount of virtual memory that the process has reserved for use in physical memory.
186=Private Bytes
187=Private Bytes is the current size, in bytes, of memory that this process has allocated that cannot be shared with other processes.
188=Announcements Total/sec
189=% Processor Time is the percentage of elapsed time that all of process threads used the processor to execution instructions. An instruction is the basic unit of execution in a computer, a thread is the object that executes instructions, and a process is the object created when a program is run. Code executed to handle some hardware interrupts and trap conditions are included in this count.
190=Enumerations Total/sec
191=% Processor Time is the percentage of elapsed time that all of process threads used the processor to execution instructions. An instruction is the basic unit of execution in a computer, a thread is the object that executes instructions, and a process is the object created when a program is run. Code executed to handle some hardware interrupts and trap conditions are included in this count.
193=% User Time is the percentage of elapsed time that this thread has spent executing code in user mode.  Applications, environment subsystems, and integral subsystems execute in user mode.  Code executing in user mode cannot damage the integrity of the Windows NT Executive, Kernel, and device drivers.  Unlike some early operating systems, Windows NT uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes.  These subsystem processes provide additional protection.  Therefore, some work done by Windows NT on behalf of your application might appear in other subsystem processes in addition to the privileged time in your process.
195=% Privileged Time is the percentage of elapsed time that the process threads spent executing code in privileged mode.  When a Windows system service in called, the service will often run in privileged mode to gain access to system-private data. Such data is protected from access by threads executing in user mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process.
197=Context Switches/sec is the rate of switches from one thread to another.  Thread switches can occur either inside of a single process or across processes.  A thread switch can be caused either by one thread asking another for information, or by a thread being preempted by another, higher priority thread becoming ready to run.  Unlike some early operating systems, Windows NT uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes.  These subsystem processes provide additional protection.  Therefore, some work done by Windows NT on behalf of an application  appear in other subsystem processes in addition to the privileged time in the application.  Switching to the subsystem process causes one Context Switch in the application thread.  Switching back causes another Context Switch in the subsystem thread.
198=Current Disk Queue Length
199=Current Disk Queue Length is the number of requests outstanding on the disk at the time the performance data is collected. It also includes requests in service at the time of the collection. This is a instantaneous snapshot, not an average over the time interval. Multi-spindle disk devices can have multiple requests that are active at one time, but other concurrent requests are awaiting service. This counter might reflect a transitory high or low queue length, but if there is a sustained load on the disk drive, it is likely that this will be consistently high. Requests experience delays proportional to the length of this queue minus the number of spindles on the disks. For good performance, this difference should average less than two.
200=% Disk Time
201=% Disk Time is the percentage of elapsed time that the selected disk drive was busy servicing read or write requests.
202=% Disk Read Time
203=% Disk Read Time is the percentage of elapsed time that the selected disk drive was busy servicing read requests.
204=% Disk Write Time
205=% Disk Write Time is the percentage of elapsed time that the selected disk drive was busy servicing write requests.
206=Avg. Disk sec/Transfer
207=Avg. Disk sec/Transfer is the time, in seconds, of the average disk transfer.
208=Avg. Disk sec/Read
209=Avg. Disk sec/Read is the average time, in seconds, of a read of data from the disk.
210=Avg. Disk sec/Write
211=Avg. Disk sec/Write is the average time, in seconds, of a write of data to the disk.
212=Disk Transfers/sec
213=Disk Transfers/sec is the rate of read and write operations on the disk.
214=Disk Reads/sec
215=Disk Reads/sec is the rate of read operations on the disk.
216=Disk Writes/sec
217=Disk Writes/sec is the rate of write operations on the disk.
218=Disk Bytes/sec
219=Disk Bytes/sec is the rate bytes are transferred to or from the disk during write or read operations.
220=Disk Read Bytes/sec
221=Disk Read Bytes/sec is the rate at which bytes are transferred from the disk during read operations.
222=Disk Write Bytes/sec
223=Disk Write Bytes/sec is rate at which bytes are transferred to the disk during write operations.
224=Avg. Disk Bytes/Transfer
225=Avg. Disk Bytes/Transfer is the average number of bytes transferred to or from the disk during write or read operations.
226=Avg. Disk Bytes/Read
227=Avg. Disk Bytes/Read is the average number of bytes transferred from the disk during read operations.
228=Avg. Disk Bytes/Write
229=Avg. Disk Bytes/Write is the average number of bytes transferred to the disk during write operations.
230=Process
231=The Process performance object consists of counters that monitor running application program and system processes.  All the threads in a process share the same address space and have access to the same data.
232=Thread
233=The Thread performance object consists of counters that measure aspects of thread behavior.  A thread is the basic object that executes instructions on a processor.  All running processes have at least one thread.
234=PhysicalDisk
235=The Physical Disk performance object consists of counters that monitor hard or fixed disk drive on a computer.  Disks are used to store file, program, and paging data and are read to retrieve these items, and written to record changes to them.  The values of physical disk counters are sums of the values of the logical disks (or partitions) into which they are divided.
236=LogicalDisk
237=The Logical Disk performance object consists of counters that monitor logical partitions of a hard or fixed disk drives.  Performance Monitor identifies logical disks by their a drive letter, such as C.
238=Processor
239=The Processor performance object consists of counters that measure aspects of processor activity The processor is the part of the computer that performs arithmetic and logical computations, initiates operations on peripherals, and runs the threads of processes.  A computer can have multiple processors.  The processor object represents each processor as an instance of the object.
240=% Total Processor Time
241=% Total Processor Time is the average percentage of time that all processors on the computer are executing non-idle threads.   This counter was designed as the primary indicator of processor activity on multiprocessor computers.  It is equal to the sum of Process: % Processor Time for all processors, divided by the number of processors.  It is calculated by summing the time that all processors spend executing the thread of the Idle process in each sample interval, subtracting that value from 100%, and dividing the difference by the number of processors on the computer.  (Each processor has an Idle thread which consumes cycles when no other threads are ready to run). For example, on a multiprocessor computer, a value of 50% means that all processors are busy for half of the sample interval, or that half of the processors are busy for all of the sample interval.  This counter displays the average percentage of busy time observed during the sample interval.  It is calculated by monitoring the time the service was inactive, and then subtracting that value from 100%.
242=% Total User Time
243=% Total User Time is the average percentage of non-idle time all processors spend in user mode.  It is the sum of Processor: % User Time for all processors on the computer, divided by the number of processors.  System: % Total User Time and System: % Total Privileged Time sum to % Total Processor Time, but not always to 100%.  (User mode is a restricted processing mode designed for applications, environment subsystems, and integral subsystems.  The alternative, privileged mode, is designed for operating system components and allows direct access to hardware and all memory.  The operating system switches application threads to privileged mode to access operating system services). This counter displays the average busy time as a percentage of the sample time.
244=% Total Privileged Time
245=% Total Privileged Time is the average percentage of non-idle time all processors spend in privileged (kernel) mode.  It is the sum of Processor: % Privileged Time for all processors on the computer, divided by the number of processors.  System: % Total User Time and System: % Total Privileged Time sum to % Total Processor Time, but not always to 100%.  (Privileged mode is an processing mode designed for operating system components which allows direct access to hardware and all memory.  The operating system switches application threads to privileged mode to access operating system services.  The alternative, user mode, is a restricted processing mode designed for applications and environment subsystems). This counter displays the average busy time as a percentage of the sample time.
246=Total Interrupts/sec
247=Total Interrupts/sec is the combined rate of hardware interrupts received and serviced by all processors on the computer It is the sum of Processor: Interrupts/sec for all processors, and divided by the number of processors, and is measured in numbers of interrupts.  It does not include DPCs, which are counted separately.  This value is an indirect indicator of the activity of devices that generate interrupts, such as the system timer, the mouse, disk drivers, data communication lines, network interface cards and other peripheral devices.  These devices normally interrupt the processor when they have completed a task or require attention.  Normal thread execution is suspended during interrupts.  Most system clocks interrupt the processor every 10 milliseconds, creating a background of interrupt activity.  This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
248=Processes
249=Processes is the number of processes in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval.  Each process represents the running of a program.
250=Threads
251=Threads is the number of threads in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval.  A thread is the basic executable entity that can execute instructions in a processor.
252=Events
253=Events is the number of events in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval.  An event is used when two or more threads try to synchronize execution.
254=Semaphores
255=Semaphores is the number of semaphores in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval.  Threads use semaphores to obtain exclusive access to data structures that they share with other threads.
256=Mutexes
257=Mutexes counts the number of mutexes in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval.  Mutexes are used by threads to assure only one thread is executing a particular section of code.
258=Sections
259=Sections is the number of sections in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval.  A section is a portion of virtual memory created by a process for storing data. A process can share sections with other processes.
260=Objects
261=The Object performance object consists of counters that monitor  logical objects in the system, such as processes, threads, mutexes, and semaphores.  This information can be used to detect the unnecessary consumption of computer resources.  Each object requires memory to store basic information about the object.
262=Redirector
263=The Redirector performance object consists of counter that monitor network connections originating at the local computer.
264=Bytes Received/sec
265=Bytes Received/sec is the rate of bytes coming in to the Redirector from the network.  It includes all application data as well as network protocol information (such as packet headers).
266=Packets Received/sec
267=Packets Received/sec is the rate at which the Redirector is receiving packets (also called SMBs or Server Message Blocks).  Network transmissions are divided into packets.  The average number of bytes received in a packet can be obtained by dividing Bytes Received/sec by this counter.  Some packets received might not contain incoming data (for example an acknowledgment to a write made by the Redirector would count as an incoming packet).
268=Read Bytes Paging/sec
269=Read Bytes Paging/sec is the rate at which the Redirector is attempting to read bytes in response to page faults.  Page faults are caused by loading of modules (such as programs and libraries), by a miss in the Cache (see Read Bytes Cache/sec), or by files directly mapped into the address space of applications (a high-performance feature of Windows NT).
270=Read Bytes Non-Paging/sec
271=Read Bytes Non-Paging/sec are those bytes read by the Redirector in response to normal file requests by an application when they are redirected to come from another computer.  In addition to file requests, this counter includes other methods of reading across the network such as Named Pipes and Transactions.  This counter does not count network protocol information, just application data.
272=Read Bytes Cache/sec
273=Read Bytes Cache/sec is the rate at which applications are accessing the file system cache by using the Redirector.  Some of these data requests are satisfied by retrieving the data from the cache.  Requests that miss the Cache cause a page fault (see Read Bytes Paging/sec).
274=Read Bytes Network/sec
275=Read Bytes Network/sec is the rate at which applications are reading data across the network. This occurs when data sought in the file system cache is not found there and must be retrieved from the network.  Dividing this value by Bytes Received/sec indicates the proportion of application data traveling across the network. (see Bytes Received/sec).
276=Bytes Transmitted/sec
277=Bytes Transmitted/sec is the rate at which bytes are leaving the Redirector to the network.  It includes all application data as well as network protocol information (such as packet headers and the like).
278=Packets Transmitted/sec
279=Packets Transmitted/sec is the rate at which the Redirector is sending packets (also called SMBs or Server Message Blocks).  Network transmissions are divided into packets.  The average number of bytes transmitted in a packet can be obtained by dividing Bytes Transmitted/sec by this counter.
280=Write Bytes Paging/sec
281=Write Bytes Paging/sec is the rate at which the Redirector is attempting to write bytes changed in the pages being used by applications.  The program data changed by modules (such as programs and libraries) that were loaded over the network are 'paged out' when no longer needed.  Other output pages come from the file system cache (see Write Bytes Cache/sec).
282=Write Bytes Non-Paging/sec
283=Write Bytes Non-Paging/sec is the rate at which bytes are written by the Redirector in response to normal file outputs by an application when they are redirected to another computer.  In addition to file requests, this count includes other methods of writing across the network, such as Named Pipes and Transactions.  This counter does not count network protocol information, just application data.
284=Write Bytes Cache/sec
285=Write Bytes Cache/sec is the rate at which applications on your computer are writing to the file system cache by using the Redirector.  The data might not leave your computer immediately; it can be retained in the cache for further modification before being written to the network.  This saves network traffic.  Each write of a byte into the cache is counted here.
286=Write Bytes Network/sec
287=Write Bytes Network/sec is the rate at which applications are writing data across the network. This occurs when the file system cache is bypassed, such as for Named Pipes or Transactions, or when the cache writes the bytes to disk to make room for other data.  Dividing this counter by Bytes Transmitted/sec will indicate the proportion of application data being to the network (see Transmitted Bytes/sec).
288=Read Operations/sec
289=File Read Operations/sec is the rate at which applications are asking the Redirector for data. Each call to a file system or similar Application Program Interface (API) call counts as one operation.
290=Read Operations Random/sec
291=Read Operations Random/sec counts the rate at which, on a file-by-file basis, reads are made that are not sequential.  If a read is made using a particular file handle, and then is followed by another read that is not immediately the contiguous next byte, this counter is incremented by one.
292=Read Packets/sec
293=Read Packets/sec is the rate at which read packets are being placed on the network.  Each time a single packet is sent with a request to read data remotely, this counter is incremented by one.
294=Reads Large/sec
295=Reads Large/sec is the rate at which reads over 2 times the server's negotiated buffer size are made by applications.  Too many of these could place a strain on server resources.  This counter is incremented once for each read. It does not count packets.
296=Read Packets Small/sec
297=Read Packets Small/sec is the rate at which reads less than one-fourth of the server's negotiated buffer size are made by applications.  Too many of these could indicate a waste of buffers on the server.  This counter is incremented once for each read. It does not count packets.
298=Write Operations/sec
299=File Write Operations/sec is the rate at which applications are sending data to the Redirector. Each call to a file system or similar Application Program Interface (API) call counts as one operation.
300=Write Operations Random/sec
301=Write Operations Random/sec is the rate at which, on a file-by-file basis, writes are made that are not sequential.  If a write is made using a particular file handle, and then is followed by another write that is not immediately the next contiguous byte, this counter is incremented by one.
302=Write Packets/sec
303=Write Packets/sec is the rate at which writes are being sent to the network.  Each time a single packet is sent with a request to write remote data, this counter is incremented by one.
304=Writes Large/sec
305=Writes Large/sec is the rate at which writes are made by applications that are over 2 times the server's negotiated buffer size.  Too many of these could place a strain on server resources.  This counter is incremented once for each write: it counts writes, not packets.
306=Write Packets Small/sec
307=Write Packets Small/sec is the rate at which writes are made by applications that are less than one-fourth of the server's negotiated buffer size.  Too many of these could indicate a waste of buffers on the server.  This counter is incremented once for each write: it counts writes, not packets.
308=Reads Denied/sec
309=Reads Denied/sec is the rate at which the server is unable to accommodate requests for Raw Reads.  When a read is much larger than the server's negotiated buffer size, the Redirector requests a Raw Read which, if granted, would permit the transfer of the data without lots of protocol overhead on each packet.  To accomplish this the server must lock out other requests, so the request is denied if the server is really busy.
310=Writes Denied/sec
311=Writes Denied/sec is the rate at which the server is unable to accommodate requests for Raw Writes.  When a write is much larger than the server's negotiated buffer size, the Redirector requests a Raw Write which, if granted, would permit the transfer of the data without lots of protocol overhead on each packet.  To accomplish this the server must lock out other requests, so the request is denied if the server is really busy.
312=Network Errors/sec
313=Network Errors/sec is the rate at which serious unexpected errors are occurring. Such errors generally indicate that the Redirector and one or more Servers are having serious communication difficulties. For example an SMB (Server Manager Block) protocol error is a Network Error. An entry is written to the System Event Log and provide details.
314=Server Sessions
315=Server Sessions counts the total number of security objects the Redirector has managed.  For example, a logon to a server followed by a network access to the same server will establish one connection, but two sessions.
316=Server Reconnects
317=Server Reconnects counts the number of times your Redirector has had to reconnect to a server in order to complete a new active request.  You can be disconnected by the Server if you remain inactive for too long.  Locally even if all your remote files are closed, the Redirector will keep your connections intact for (nominally) ten minutes.  Such inactive connections are called Dormant Connections.  Reconnecting is expensive in time.
318=Connects Core
319=Connects Core counts the number of connections you have to servers running the original MS-Net SMB protocol, including MS-Net itself and Xenix and VAX's.
320=Connects Lan Manager 2.0
321=Connects LAN Manager 2.0 counts connections to LAN Manager 2.0 servers, including LMX servers.
322=Connects Lan Manager 2.1
323=Connects LAN Manager 2.1 counts connections to LAN Manager 2.1 servers, including LMX servers.
324=Connects Windows NT
325=Connects Windows NT counts the connections to Windows 2000 or earlier computers.
326=Server Disconnects
327=Server Disconnects counts the number of times a Server has disconnected your Redirector.  See also Server Reconnects.
328=Server Sessions Hung
329=Server Sessions Hung counts the number of active sessions that are timed out and unable to proceed due to a lack of response from the remote server.
330=Server
331=The Server performance object consists of counters that measure communication between the  local computer and the network.
333=The number of bytes the server has received from the network.  Indicates how busy the server is.
335=The number of bytes the server has sent on the network.  Indicates how busy the server is.
336=Thread Wait Reason
337=Thread Wait Reason is only applicable when the thread is in the Wait state (see Thread State).  It is 0 or 7 when the thread is waiting for the Executive, 1 or 8 for a Free Page, 2 or 9 for a Page In, 3 or 10 for a Pool Allocation, 4 or 11 for an Execution Delay, 5 or 12 for a Suspended condition, 6 or 13 for a User Request, 14 for an Event Pair High, 15 for an Event Pair Low, 16 for an LPC Receive, 17 for an LPC Reply, 18 for Virtual Memory, 19 for a Page Out; 20 and higher are not assigned at the time of this writing.  Event Pairs are used to communicate with protected subsystems (see Context Switches).
339=% DPC Time is the percentage of time that the processor spent receiving and servicing deferred procedure calls (DPCs) during the sample interval. DPCs are interrupts that run at a lower priority than standard interrupts. % DPC Time is a component of % Privileged Time because DPCs are executed in privileged mode. They are counted separately and are not a component of the interrupt counters. This counter displays the average busy time as a percentage of the sample time.
340=Sessions Timed Out
341=The number of sessions that have been closed due to their idle time exceeding the AutoDisconnect parameter for the server.  Shows whether the AutoDisconnect setting is helping to conserve resources.
342=Sessions Errored Out
343=The number of sessions that have been closed due to unexpected error conditions or sessions that have reached the autodisconnect timeout and have been disconnected normally.
344=Sessions Logged Off
345=The number of sessions that have terminated normally.  Useful in interpreting the Sessions Times Out and Sessions Errored Out statistics--allows percentage calculations.
346=Sessions Forced Off
347=The number of sessions that have been forced to logoff.  Can indicate how many sessions were forced to logoff due to logon time constraints.
348=Errors Logon
349=The number of failed logon attempts to the server.  Can indicate whether password guessing programs are being used to crack the security on the server.
350=Errors Access Permissions
351=The number of times opens on behalf of clients have failed with STATUS_ACCESS_DENIED.  Can indicate whether somebody is randomly attempting to access files in hopes of getting at something that was not properly protected.
352=Errors Granted Access
353=The number of times accesses to files opened successfully were denied.  Can indicate attempts to access files without proper access authorization.
354=Errors System
355=The number of times an internal Server Error was detected.  Unexpected errors usually indicate a problem with the Server.
356=Blocking Requests Rejected
357=The number of times the server has rejected blocking SMBs due to insufficient count of free work items.  Indicates whether the MaxWorkItem or MinFreeWorkItems server parameters might need to be adjusted.
358=Work Item Shortages
359=The number of times STATUS_DATA_NOT_ACCEPTED was returned at receive indication time.  This occurs when no work item is available or can be allocated to service the incoming request.  Indicates whether the InitWorkItems or MaxWorkItems parameters might need to be adjusted.
360=Files Opened Total
361=The number of successful open attempts performed by the server of behalf of clients.  Useful in determining the amount of file I/O, determining overhead for path-based operations, and for determining the effectiveness of open locks.
362=Files Open
363=The number of files currently opened in the server.  Indicates current server activity.
365=The number of sessions currently active in the server.  Indicates current server activity.
366=File Directory Searches
367=The number of searches for files currently active in the server.  Indicates current server activity.
369=The number of bytes of non-pageable computer memory the server is using.  This value is useful for determining the values of the MaxNonpagedMemoryUsage value entry in the WindowsáNT Registry.
370=Pool Nonpaged Failures
371=The number of times allocations from nonpaged pool have failed.  Indicates that the computer's physical memory is too small.
372=Pool Nonpaged Peak
373=The maximum number of bytes of nonpaged pool the server has had in use at any one point.  Indicates how much physical memory the computer should have.
375=The number of bytes of pageable computer memory the server is currently using.  Can help in determining good values for the MaxPagedMemoryUsage parameter.
376=Pool Paged Failures
377=The number of times allocations from paged pool have failed.  Indicates that the computer's physical memory or paging file are too small.
378=Pool Paged Peak
379=The maximum number of bytes of paged pool the server has had allocated.  Indicates the proper sizes of the Page File(s) and physical memory.
381=Server Announce Allocations Failed/sec is the rate at which server (or domain) announcements have failed due to lack of memory.
383=Mailslot Allocations Failed is the number of times the datagram receiver has failed to allocate a buffer to hold a user mailslot write.
385=Mailslot Receives Failed indicates the number of mailslot messages that could not be received due to transport failures.
387=Mailslot Writes Failed is the total number of mailslot messages that have been successfully received, but that could not be written to the mailslot.
388=Bytes Total/sec
389=Bytes Total/sec is the rate the Redirector is processing data bytes.  This includes all application and file data in addition to protocol information such as packet headers.
391=File Data Operations/sec is the rate at which the Redirector is processing data operations. One operation should include many bytes, since each operation has overhead. The efficiency of this path can be determined by dividing the Bytes/sec by this counter to obtain the average number of bytes transferred per operation.
392=Current Commands
393=Current Commands counter indicates the number of pending commands from the local computer to all destination servers.  If the Current Commands counter shows a high number and the local computer is idle, this may indicate a network-related problem or a redirector bottleneck on the local computer.
395=The number of bytes the server has sent to and received from the network.  This value provides an overall indication of how busy the server is.
397=% Interrupt Time is the time the processor spends receiving and servicing hardware interrupts during sample intervals. This value is an indirect indicator of the activity of devices that generate interrupts, such as the system clock, the mouse, disk drivers, data communication lines, network interface cards and other peripheral devices. These devices normally interrupt the processor when they have completed a task or require attention. Normal thread execution is suspended during interrupts. Most system clocks interrupt the processor every 10 milliseconds, creating a background of interrupt activity. suspends normal thread execution during interrupts. This counter displays the average busy time as a percentage of the sample time.
398=NWLink NetBIOS
399=The NWLink NetBIOS performance object consists of counters that monitor IPX transport rates and connections.
400=Packets/sec
401=Packets/sec is the rate the Redirector is processing data packets.  One packet includes (hopefully) many bytes.  We say hopefully here because each packet has protocol overhead.  You can determine the efficiency of this path by dividing the Bytes/sec by this counter to determine the average number of bytes transferred/packet.  You can also divide this counter by Operations/sec to determine the average number of packets per operation, another measure of efficiency.
404=Context Blocks Queued/sec
405=Context Blocks Queued per second is the rate at which work context blocks had to be placed on the server's FSP queue to await server action.
406=File Data Operations/sec
407=File Data Operations/ sec is the combined rate of read and write operations on all logical disks on the computer.  This is the inverse of System: File Control Operations/sec.  This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
408=% Free Space
409=% Free Space is the percentage of total usable space on the selected logical disk drive that was free.
410=Free Megabytes
411=Free Megabytes displays the unallocated space, in megabytes, on the disk drive in megabytes. One megabyte is equal to 1,048,576 bytes.
412=Connections Open
413=Connections Open is the number of connections currently open for this protocol.  This counter shows the current count only and does not accumulate over time.
414=Connections No Retries
415=Connections No Retries is the total count of connections that were successfully made on the first try.  This number is an accumulator and shows a running total.
416=Connections With Retries
417=Connections With Retries is the total count of connections that were made after retrying the attempt.  A retry occurs when the first connection attempt failed.  This number is an accumulator and shows a running total.
418=Disconnects Local
419=Disconnects Local is the number of session disconnections that were initiated by the local computer.  This number is an accumulator and shows a running total.
420=Disconnects Remote
421=Disconnects Remote is the number of session disconnections that were initiated by the remote computer.  This number is an accumulator and shows a running total.
422=Failures Link
423=Failures Link is the number of connections that were dropped due to a link failure.  This number is an accumulator and shows a running total.
424=Failures Adapter
425=Failures Adapter is the number of connections that were dropped due to an adapter failure.  This number is an accumulator and shows a running total.
426=Connection Session Timeouts
427=Connection Session Timeouts is the number of connections that were dropped due to a session timeout.  This number is an accumulator and shows a running total.
428=Connections Canceled
429=Connections Canceled is the number of connections that were canceled.  This number is an accumulator and shows a running total.
430=Failures Resource Remote
431=Failures Resource Remote is the number of connections that failed because of resource problems or shortages on the remote computer.  This number is an accumulator and shows a running total.
432=Failures Resource Local
433=Failures Resource Local is the number of connections that failed because of resource problems or shortages on the local computer.  This number is an accumulator and shows a running total.
434=Failures Not Found
435=Failures Not Found is the number of connection attempts that failed because the remote computer could not be found.  This number is an accumulator and shows a running total.
436=Failures No Listen
437=Failures No Listen is the number of connections that were rejected because the remote computer was not listening for connection requests.
438=Datagrams/sec
439=Datagrams/sec is the rate at which datagrams are processed by the computer.  This counter displays the sum of datagrams sent and datagrams received.  A datagram is a connectionless packet whose delivery to a remote is not guaranteed.
440=Datagram Bytes/sec
441=Datagram Bytes/sec is the rate at which datagram bytes are processed by the computer.  This counter is the sum of datagram bytes that are sent as well as received.  A datagram is a connectionless packet whose delivery to a remote is not guaranteed.
442=Datagrams Sent/sec
443=Datagrams Sent/sec is the rate at which datagrams are sent from the computer.  A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.
444=Datagram Bytes Sent/sec
445=Datagram Bytes Sent/sec is the rate at which datagram bytes are sent from the computer.  A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.
446=Datagrams Received/sec
447=Datagrams Received/sec is the rate at which datagrams are received by the computer.  A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.
448=Datagram Bytes Received/sec
449=Datagram Bytes Received/sec is the rate at which datagram bytes are received by the computer.  A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.
451=Packets/sec is the rate at which packets are processed by the computer.  This count is the sum of Packets Sent and Packets Received per second.  This counter includes all packets processed: control as well as data packets.
452=Packets Sent/sec
453=Packets Sent/sec is the rate at which packets are sent by the computer.  This counter counts all packets sent by the computer, i.e. control as well as data packets.
455=Packets Received/sec is the rate at which packets are received by the computer.  This counter counts all packets processed: control as well as data packets.
456=Frames/sec
457=Frames/sec is the rate at which data frames (or packets) are processed by the computer.  This counter is the sum of data frames sent and data frames received.  This counter only counts those frames (packets) that carry data.
458=Frame Bytes/sec
459=Frame Bytes/sec is the rate at which data bytes are processed by the computer.  This counter is the sum of data frame bytes sent and received.  This counter only counts the byte in frames (packets) that carry data.
460=Frames Sent/sec
461=Frames Sent/sec is the rate at which data frames are sent by the computer.  This counter only counts the frames (packets) that carry data.
462=Frame Bytes Sent/sec
463=Frame Bytes Sent/sec is the rate at which data bytes are sent by the computer.  This counter only counts the bytes in frames (packets) that carry data.
464=Frames Received/sec
465=Frames Received/sec is the rate at which data frames are received by the computer.  This counter only counts the frames (packets) that carry data.
466=Frame Bytes Received/sec
467=Frame Bytes Received/sec is the rate at which data bytes are received by the computer.  This counter only counts the frames (packets) that carry data.
468=Frames Re-Sent/sec
469=Frames Re-Sent/sec is the rate at which data frames (packets) are re-sent by the computer.  This counter only counts the frames or packets that carry data.
470=Frame Bytes Re-Sent/sec
471=Frame Bytes Re-Sent/sec is the rate at which data bytes are re-sent by the computer.  This counter only counts the bytes in frames that carry data.
472=Frames Rejected/sec
473=Frames Rejected/sec is the rate at which data frames are rejected.  This counter only counts the frames (packets) that carry data.
474=Frame Bytes Rejected/sec
475=Frame Bytes Rejected/sec is the rate at which data bytes are rejected.  This counter only counts the bytes in data frames (packets) that carry data.
476=Expirations Response
477=Expirations Response is the count of T1 timer expirations.
478=Expirations Ack
479=Expirations Ack is the count of T2 timer expirations.
480=Window Send Maximum
481=Window Send Maximum is the maximum number of bytes of data that will be sent before waiting for an acknowledgment from the remote computer.
482=Window Send Average
483=Window Send Average is the running average number of data bytes that were sent before waiting for an acknowledgment from the remote computer.
484=Piggyback Ack Queued/sec
485=Piggyback Ack Queued/sec is the rate at which piggybacked acknowledgments are queued. Piggyback acknowledgments are acknowledgments to received packets that are to be included in the next outgoing packet to the remote computer.
486=Piggyback Ack Timeouts
487=Piggyback Ack Timeouts is the number of times that a piggyback acknowledgment could not be sent because there was no outgoing packet to the remote on which to piggyback.  A piggyback ack is an acknowledgment to a received packet that is sent along in an outgoing data packet to the remote computer.  If no outgoing packet is sent within the timeout period, then an ack packet is sent and this counter is incremented.
488=NWLink IPX
489=The NWLink IPX performance object consists of counters that measure datagram transmission to and from computers using the IPX protocol.
490=NWLink SPX
491=The NWLink SPX performance object consist of counters that measure data transmission and session connections for computers using the SPX protocol.
492=NetBEUI
493=The NetBEUI performance object consists of counters that measure data transmission for network activity which conforms to the NetBIOS End User Interface standard.
494=NetBEUI Resource
495=The NetBEUI Resource performance object consists of counters that track the use of buffers by the NetBEUI protocol.
496=Used Maximum
497=Used Maximum is the maximum number of NetBEUI resources (buffers) in use at any point in time.  This value is useful in sizing the maximum resources provided.  The number in parentheses following the resource name is used to identify the resource in Event Log messages.
498=Used Average
499=Used Average is the current number of resources (buffers) in use at this time.  The number in parentheses following the resource name is used to identify the resource in Event Log messages.
500=Times Exhausted
501=Times Exhausted is the number of times all the resources (buffers) were in use.  The number in parentheses following the resource name is used to identify the resource in Event Log messages.
502=NBT Connection
503=The NBT Connection performance object consists of counters that measure the rates at which bytes are sent and received over the NBT connection between the local computer and a remote computer.  The connection is identified by the name of the remote computer.
505=Bytes Received/sec is the rate at which bytes are received by the local computer over an NBT connection to some remote computer.  All the bytes received by the local computer over the particular NBT connection are counted.
506=Bytes Sent/sec
507=Bytes Sent/sec is the rate at which bytes are sent by the local computer over an NBT connection to some remote computer.  All the bytes sent by the local computer over the particular NBT connection are counted.
508=Total Bytes/sec
509=Bytes Total/sec is the rate at which bytes are sent or received by the local computer over an NBT connection to some remote computer.  All the bytes sent or received by the local computer over the particular NBT connection are counted.
510=Network Interface
511=The Network Interface performance object consists of counters that measure the rates at which bytes and packets are sent and received over a TCP/IP network connection.  It includes counters that monitor connection errors.
512=Bytes/sec
513=Bytes Total/sec is the rate at which bytes are sent and received over each network adapter, including framing characters. Network Interface\Bytes Total/sec is a sum of Network Interface\Bytes Received/sec and Network Interface\Bytes Sent/sec.
515=Packets/sec is the rate at which packets are sent and received on the network interface.
517=Packets Received/sec is the rate at which packets are received on the network interface.
519=Packets Sent/sec is the rate at which packets are sent on the network interface.
520=Current Bandwidth
521=Current Bandwidth is an estimate of the current bandwidth of the network interface in bits per second (BPS).  For interfaces that do not vary in bandwidth or for those where no accurate estimation can be made, this value is the nominal bandwidth.
523=Bytes Received/sec is the rate at which bytes are received over each network adapter, including framing characters. Network Interface\Bytes Received/sec is a subset of Network Interface\Bytes Total/sec.
524=Packets Received Unicast/sec
525=Packets Received Unicast/sec is the rate at which (subnet) unicast packets are delivered to a higher-layer protocol.
526=Packets Received Non-Unicast/sec
527=Packets Received Non-Unicast/sec is the rate at which non-unicast (subnet broadcast or subnet multicast) packets are delivered to a higher-layer protocol.
528=Packets Received Discarded
529=Packets Received Discarded is the number of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their delivery to a higher-layer protocol.  One possible reason for discarding packets could be to free up buffer space.
530=Packets Received Errors
531=Packets Received Errors is the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
532=Packets Received Unknown
533=Packets Received Unknown is the number of packets received through the interface that were discarded because of an unknown or unsupported protocol.
535=Bytes Sent/sec is the rate at which bytes are sent over each network adapter, including framing characters. Network Interface\Bytes Sent/sec is a subset of Network Interface\Bytes Total/sec.
536=Packets Sent Unicast/sec
537=Packets Sent Unicast/sec is the rate at which packets are requested to be transmitted to subnet-unicast addresses by higher-level protocols.  The rate includes the packets that were discarded or not sent.
538=Packets Sent Non-Unicast/sec
539=Packets Sent Non-Unicast/sec is the rate at which packets are requested to be transmitted to non-unicast (subnet broadcast or subnet multicast) addresses by higher-level protocols.  The rate includes the packets that were discarded or not sent.
540=Packets Outbound Discarded
541=Packets Outbound Discarded is the number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent transmission. One possible reason for discarding packets could be to free up buffer space.
542=Packets Outbound Errors
543=Packets Outbound Errors is the number of outbound packets that could not be transmitted because of errors.
544=Output Queue Length
545=Output Queue Length is the length of the output packet queue (in packets). If this is longer than two, there are delays and the bottleneck should be found and eliminated, if possible. Since the requests are queued by the Network Driver Interface Specification (NDIS) in this implementation, this will always be 0.
546=IPv4
547=The IP performance object consists of counters that measure the rates at which IP datagrams are sent and received by using IP protocols.  It also includes counters that monitor IP protocol errors.
548=IPv6
549=Datagrams/sec is the rate, in incidents per second, at which IP datagrams were received from or sent to the interfaces, including those in error. Forwarded datagrams are not included in this rate.
551=Datagrams Received/sec is the rate, in incidents per second, at which IP datagrams are received from the interfaces, including those in error. Datagrams Received/sec is a subset of Datagrams/sec.
552=Datagrams Received Header Errors
553=Datagrams Received Header Errors is the number of input datagrams that were discarded due to errors in the IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
554=Datagrams Received Address Errors
555=Datagrams Received Address Errors is the number of input datagrams that were discarded because the IP address in their IP header destination field was not valid for the computer. This count includes invalid addresses (for example, 0.0.  0.0) and addresses of unsupported Classes (for example, Class E). For entities that are not IP gateways and do not forward datagrams, this counter includes datagrams that were discarded because the destination address was not a local address.
556=Datagrams Forwarded/sec
557=Datagrams Forwarded/sec is the rate, in incidents per second, at which attemps were made to find routes to forward input datagrams their final destination, because the local server was not the final IP destination. In servers that do not act as IP Gateways, this rate includes only packets that were source-routed via this entity, where the source-route option processing was successful.
558=Datagrams Received Unknown Protocol
559=Datagrams Received Unknown Protocol is the number of locally-addressed datagrams that were successfully received but were discarded because of an unknown or unsupported protocol.
560=Datagrams Received Discarded
561=Datagrams Received Discarded is the number of input IP datagrams that were discarded even though problems prevented their continued processing (for example, lack of buffer space). This counter does not include any datagrams discarded while awaiting re-assembly.
562=Datagrams Received Delivered/sec
563=Datagrams Received Delivered/sec is the rate, in incidents per second, at which input datagrams were successfully delivered to IP user-protocols, including Internet Control Message Protocol (ICMP).
565=Datagrams Sent/sec is the rate, in incidents per second, at which IP datagrams were supplied for transmission by local IP user-protocols (including ICMP). This counter does not include any datagrams counted in Datagrams Forwarded/sec. Datagrams Sent/sec is a subset of Datagrams/sec.
566=Datagrams Outbound Discarded
567=Datagrams Outbound Discarded is the number of output IP datagrams that were discarded even though no problems were encountered to prevent their transmission to their destination (for example, lack of buffer space). This counter includes datagrams counted in Datagrams Forwarded/sec that meet this criterion.
568=Datagrams Outbound No Route
569=Datagrams Outbound No Route is the number of IP datagrams that were discarded because no route could be found to transmit them to their destination.  This counter includes any packets counted in Datagrams Forwarded/sec that meet this `no route' criterion.
570=Fragments Received/sec
571=Fragments Received/sec is the rate, in incidents per second, at which IP fragments that need to be reassembled at this entity are received.
572=Fragments Re-assembled/sec
573=Fragments Re-assembled/sec is the rate, in incidents per second, at which IP fragments were successfully reassembled.
574=Fragment Re-assembly Failures
575=Fragment Re-assembly Failures is the number of failures detected by the IP reassembly algorithm, such as time outs, errors, etc.  This is not necessarily a count of discarded IP fragments since some algorithms (notably RFC 815) lose track of the number of fragments by combining them as they are received.
576=Fragmented Datagrams/sec
577=Fragmented Datagrams/sec is the rate, in incidents per second, at which datagrams are successfully fragmented.
578=Fragmentation Failures
579=Fragmentation Failures is the number of IP datagrams that were discarded because they needed to be fragmented at but could not be (for example, because the `Don't Fragment' flag was set).
580=Fragments Created/sec
581=Fragments Created/sec is the rate, in incidents per second, at which IP datagram fragments were generated as a result of fragmentation.
582=ICMP
583=The ICMP performance object consists of counters that measure the rates at which messages are sent and received by using ICMP protocols.  It also includes counters that monitor ICMP protocol errors.
584=Messages/sec
585=Messages/sec is the total rate, in incidents per second, at which ICMP messages were sent and received by the entity. The rate includes messages received or sent in error.
586=Messages Received/sec
587=Messages Received/sec is the rate, in incidents per second at which ICMP messages were received. The rate includes messages received in error.
588=Messages Received Errors
589=Messages Received Errors is the number of ICMP messages that the entity received but had errors, such as bad ICMP checksums, bad length, etc.
590=Received Dest. Unreachable
591=Received Destination Unreachable is the number of ICMP Destination Unreachable messages received.
592=Received Time Exceeded
593=Received Time Exceeded is the number of ICMP Time Exceeded messages received.
594=Received Parameter Problem
595=Received Parameter Problem is the number of ICMP Parameter Problem messages received.
596=Received Source Quench
597=Received Source Quench is the number of ICMP Source Quench messages received.
598=Received Redirect/sec
599=Received Redirect/sec is the rate, in incidents per second, at which ICMP Redirect messages were received.
600=Received Echo/sec
601=Received Echo/sec is the rate, in incidents per second, at which ICMP Echo messages were received.
602=Received Echo Reply/sec
603=Received Echo Reply/sec is the rate, in incidents per second, at which ICMP Echo Reply messages were received.
604=Received Timestamp/sec
605=Received Timestamp/sec is the rate, in incidents per second at which ICMP Timestamp Request messages were received.
606=Received Timestamp Reply/sec
607=Received Timestamp Reply/sec is the rate of ICMP Timestamp Reply messages received.
608=Received Address Mask
609=Received Address Mask is the number of ICMP Address Mask Request messages received.
610=Received Address Mask Reply
611=Received Address Mask Reply is the number of ICMP Address Mask Reply messages received.
612=Messages Sent/sec
613=Messages Sent/sec is the rate, in incidents per second, at which the server attempted to send. The rate includes those messages sent in error.
614=Messages Outbound Errors
615=Messages Outbound Errors is the number of ICMP messages that were not send due to problems within ICMP, such as lack of buffers.  This value does not include errors discovered outside the ICMP layer, such as those recording the failure of IP to route the resultant datagram.  In some implementations, none of the error types are included in the value of this counter.
616=Sent Destination Unreachable
617=Sent Destination Unreachable is the number of ICMP Destination Unreachable messages sent.
618=Sent Time Exceeded
619=Sent Time Exceeded is the number of ICMP Time Exceeded messages sent.
620=Sent Parameter Problem
621=Sent Parameter Problem is the number of ICMP Parameter Problem messages sent.
622=Sent Source Quench
623=Sent Source Quench is the number of ICMP Source Quench messages sent.
624=Sent Redirect/sec
625=Sent Redirect/sec is the rate, in incidents per second, at which ICMP Redirect messages were sent.
626=Sent Echo/sec
627=Sent Echo/sec is the rate of ICMP Echo messages sent.
628=Sent Echo Reply/sec
629=Sent Echo Reply/sec is the rate, in incidents per second, at which ICMP Echo Reply messages were sent.
630=Sent Timestamp/sec
631=Sent Timestamp/sec is the rate, in incidents per second, at which ICMP Timestamp Request messages were sent.
632=Sent Timestamp Reply/sec
633=Sent Timestamp Reply/sec is the rate, in incidents per second,  at which ICMP Timestamp Reply messages were sent.
634=Sent Address Mask
635=Sent Address Mask is the number of ICMP Address Mask Request messages sent.
636=Sent Address Mask Reply
637=Sent Address Mask Reply is the number of ICMP Address Mask Reply messages sent.
638=TCPv4
639=The TCP performance object consists of counters that measure the rates at which TCP Segments are sent and received by using the TCP protocol.  It includes counters that monitor the number of TCP connections in each TCP connection state.
640=Segments/sec
641=Segments/sec is the rate at which TCP segments are sent or received using the TCP protocol.
642=Connections Established
643=Connections Established is the number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT.
644=Connections Active
645=Connections Active is the number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. In other words, it shows a number of connections which are initiated by the local computer. The value is a cumulative total.
646=Connections Passive
647=Connections Passive is the number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. In other words, it shows a number of connections to the local computer, which are initiated by remote computers. The value is a cumulative total.
648=Connection Failures
649=Connection Failures is the number of times TCP connections have made a direct transition to the CLOSED state from the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
650=Connections Reset
651=Connections Reset is the number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
652=Segments Received/sec
653=Segments Received/sec is the rate at which segments are received, including those received in error.  This count includes segments received on currently established connections.
654=Segments Sent/sec
655=Segments Sent/sec is the rate at which segments are sent, including those on current connections, but excluding those containing only retransmitted bytes.
656=Segments Retransmitted/sec
657=Segments Retransmitted/sec is the rate at which segments are retransmitted, that is, segments transmitted containing one or more previously transmitted bytes.
658=UDPv4
659=The UDP performance object consists of counters that measure the rates at which UDP datagrams are sent and received by using the UDP protocol.  It includes counters that monitor UDP protocol errors.
660=% Total DPC Time
661=Datagrams/sec is the rate at which UDP datagrams are sent or received by the entity.
662=% Total Interrupt Time
663=Datagrams Received/sec is the rate at which UDP datagrams are delivered to UDP users.
664=Datagrams No Port/sec
665=Datagrams No Port/sec is the rate of received UDP datagrams for which there was no application at the destination port.
666=Datagrams Received Errors
667=Datagrams Received Errors is the number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
669=Datagrams Sent/sec is the rate at which UDP datagrams are sent from the entity.
670=Disk Storage Unit
671=Disk Storage device statistics from the foreign computer
672=Allocation Failures
673=The number of allocation failures reported by the disk storage device
674=System Up Time
675=System Up Time is the elapsed time (in seconds) that the computer has been running since it was last started.  This counter displays the difference between the start time and the current time.
676=System Handle Count
677=The current number of system handles in use.
678=Free System Page Table Entries
679=Free System Page Table Entries is the number of page table entries not currently in used by the system.  This counter displays the last observed value only; it is not an average.
680=Thread Count
681=The number of threads currently active in this process. An instruction is the basic unit of execution in a processor, and a thread is the object that executes instructions. Every running process has at least one thread.
682=Priority Base
683=The current base priority of this process. Threads within a process can raise and lower their own base priority relative to the process' base priority.
684=Elapsed Time
685=The total elapsed time, in seconds, that this process has been running.
686=Alignment Fixups/sec
687=Alignment Fixups/sec is the rate, in incidents per seconds, at alignment faults were fixed by the system.
688=Exception Dispatches/sec
689=Exception Dispatches/sec is the rate, in incidents per second, at which exceptions were dispatched by the system.
690=Floating Emulations/sec
691=Floating Emulations/sec is the rate of floating emulations performed by the system.  This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
692=Logon/sec
693=Logon/sec is the rate of all server logons.
694=Priority Current
695=The current dynamic priority of this thread.  The system can raise the thread's dynamic priority above the base priority if the thread is handling user input, or lower it towards the base priority if the thread becomes compute bound.
696=% DPC Time
697=The current base priority of this thread.  The system can raise the thread's dynamic priority above the base priority if the thread is handling user input, or lower it towards the base priority if the thread becomes compute bound.
698=% Interrupt Time
699=The total elapsed time (in seconds) this thread has been running.
700=Paging File
701=The Paging File performance object consists of counters that monitor the paging file(s) on the computer.  The paging file is a reserved space on disk that backs up committed physical memory on the computer.
702=% Usage
703=The amount of the Page File instance in use in percent.  See also Process\\Page File Bytes.
704=% Usage Peak
705=The peak usage of the Page File instance in percent.  See also Process\\Page File Bytes Peak.
706=Start Address
707=Starting virtual address for this thread.
708=User PC
709=Current User Program Counter for this thread.
710=Mapped Space No Access
711=Mapped Space is virtual memory that has been mapped  to a specific virtual address (or range of virtual addresses) in the process' virtual address space.  No Access protection prevents a process from writing to or reading from these pages and will generate an access violation if either is attempted.
712=Mapped Space Read Only
713=Mapped Space is virtual memory that has been mapped  to a specific virtual address (or range of virtual addresses) in the process' virtual address space.  Read Only protection prevents the contents of these pages from being modified.  Any attempts to write or modify these pages will generate an access violation.
714=Mapped Space Read/Write
715=Mapped Space is virtual memory that has been mapped  to a specific virtual address (or range of virtual addresses) in the process' virtual address space.  Read/Write protection allows a process to read, modify and write to these pages.
716=Mapped Space Write Copy
717=Mapped Space is virtual memory that has been mapped  to a specific virtual address (or range of virtual addresses) in the process' virtual address space.  Write Copy protection is used when memory is shared for reading but not for writing.  When processes are reading this memory, they can share the same memory, however, when a sharing process wants to have write access to this shared memory, a copy of that memory is made.
718=Mapped Space Executable
719=Mapped Space is virtual memory that has been mapped  to a specific virtual address (or range of virtual addresses) in the process' virtual address space.  Executable memory is memory that can be executed by programs, but cannot be read or written.  This type of protection is not supported by all processor types.
720=Mapped Space Exec Read Only
721=Mapped Space is virtual memory that has been mapped  to a specific virtual address (or range of virtual addresses) in the process' virtual address space.  Execute/Read Only memory is memory that can be executed as well as read.
722=Mapped Space Exec Read/Write
723=Mapped Space is virtual memory that has been mapped  to a specific virtual address (or range of virtual addresses) in the process' virtual address space.  Execute/Read/Write memory is memory that can be executed by programs as well as read and modified.
724=Mapped Space Exec Write Copy
725=Mapped Space is virtual memory that has been mapped  to a specific virtual address (or range of virtual addresses) in the process' virtual address space.  Execute Write Copy is memory that can be executed by programs as well as read and written.  This type of protection is used when memory needs to be shared between processes.  If the sharing processes only read the memory, then they will all use the same memory.  If a sharing process desires write access, then a copy of this memory will be made for that process.
726=Reserved Space No Access
727=Reserved Space is virtual memory that has been reserved for future use by a process, but has not been mapped or committed.  No Access protection prevents a process from writing to or reading from these pages and will generate an access violation if either is attempted.
728=Reserved Space Read Only
729=Reserved Space is virtual memory that has been reserved for future use by a process, but has not been mapped or committed.  Read Only protection prevents the contents of these pages from being modified.  Any attempts to write or modify these pages will generate an access violation.
730=Reserved Space Read/Write
731=Reserved Space is virtual memory that has been reserved for future use by a process, but has not been mapped or committed.  Read/Write protection allows a process to read, modify and write to these pages.
732=Reserved Space Write Copy
733=Reserved Space is virtual memory that has been reserved for future use by a process, but has not been mapped or committed.  Write Copy protection is used when memory is shared for reading but not for writing.  When processes are reading this memory, they can share the same memory, however, when a sharing process wants to have read/write access to this shared memory, a copy of that memory is made.
734=Reserved Space Executable
735=Reserved Space is virtual memory that has been reserved for future use by a process, but has not been mapped or committed.  Executable memory is memory that can be executed by programs, but cannot be read or written.  This type of protection is not supported by all processor types.
736=Reserved Space Exec Read Only
737=Reserved Space is virtual memory that has been reserved for future use by a process, but has not been mapped or committed.  Execute/Read Only memory is memory that can be executed as well as read.
738=Reserved Space Exec Read/Write
739=Reserved Space is virtual memory that has been reserved for future use by a process, but has not been mapped or committed.  Execute/Read/Write memory is memory that can be executed by programs as well as read and modified.
740=Image
741=The Image performance object consists of counters that monitor the virtual address usage of images executed by processes on the computer.
742=Reserved Space Exec Write Copy
743=Reserved Space is virtual memory that has been reserved for future use by a process, but has not been mapped or committed.  Execute Write Copy is memory that can be executed by programs as well as read and written.  This type of protection is used when memory needs to be shared between processes.  If the sharing processes only read the memory, then they will all use the same memory.  If a sharing process desires write access, then a copy of this memory will be made for that process.
744=Unassigned Space No Access
745=Unassigned Space is mapped and committed virtual memory in use by the process that is not attributable to any particular image being executed by that process.  No Access protection prevents a process from writing to or reading from these pages and will generate an access violation if either is attempted.
746=Unassigned Space Read Only
747=Unassigned Space is mapped and committed virtual memory in use by the process that is not attributable to any particular image being executed by that process.  Read Only protection prevents the contents of these pages from being modified.  Any attempts to write or modify these pages will generate an access violation.
748=Unassigned Space Read/Write
749=Unassigned Space is mapped and committed virtual memory in use by the process that is not attributable to any particular image being executed by that process.  Read/Write protection allows a process to read, modify and write to these pages.
750=Unassigned Space Write Copy
751=Unassigned Space is mapped and committed virtual memory in use by the process that is not attributable to any particular image being executed by that process.  Write Copy protection is used when memory is shared for reading but not for writing.  When processes are reading this memory, they can share the same memory, however, when a sharing process wants to have read/write access to this shared memory, a copy of that memory is made for writing to.
752=Unassigned Space Executable
753=Unassigned Space is mapped and committed virtual memory in use by the process that is not attributable to any particular image being executed by that process.  Executable memory is memory that can be executed by programs, but cannot be read or written.  This type of protection is not supported by all processor types.
754=Unassigned Space Exec Read Only
755=Unassigned Space is mapped and committed virtual memory in use by the process that is not attributable to any particular image being executed by that process.  Execute/Read Only memory is memory that can be executed as well as read.
756=Unassigned Space Exec Read/Write
757=Unassigned Space is mapped and committed virtual memory in use by the process that is not attributable to any particular image being executed by that process.  Execute/Read/Write memory is memory that can be executed by programs as well as read and written.
758=Unassigned Space Exec Write Copy
759=Unassigned Space is mapped and committed virtual memory in use by the process that is not attributable to any particular image being executed by that process.  Execute Write Copy is memory that can be executed by programs as well as read and written.  This type of protection is used when memory needs to be shared between processes.  If the sharing processes only read the memory, then they will all use the same memory.  If a sharing process desires write access, then a copy of this memory will be made for that process.
760=Image Space No Access
761=Image Space is the virtual address space in use by the images being executed by the process.  This is the sum of all the address space with this protection allocated by images run by the selected process  No Access protection prevents a process from writing to or reading from these pages and will generate an access violation if either is attempted.
762=Image Space Read Only
763=Image Space is the virtual address space in use by the images being executed by the process.  This is the sum of all the address space with this protection allocated by images run by the selected process  Read Only protection prevents the contents of these pages from being modified.  Any attempts to write or modify these pages will generate an access violation.
764=Image Space Read/Write
765=Image Space is the virtual address space in use by the images being executed by the process.  This is the sum of all the address space with this protection allocated by images run by the selected process  Read/Write protection allows a process to read, modify and write to these pages.
766=Image Space Write Copy
767=Image Space is the virtual address space in use by the images being executed by the process.  This is the sum of all the address space with this protection allocated by images run by the selected process  Write Copy protection is used when memory is shared for reading but not for writing.  When processes are reading this memory, they can share the same memory, however, when a sharing process wants to have read/write access to this shared memory, a copy of that memory is made for writing to.
768=Image Space Executable
769=Image Space is the virtual address space in use by the images being executed by the process.  This is the sum of all the address space with this protection allocated by images run by the selected process  Executable memory is memory that can be executed by programs, but cannot be read or written.  This type of protection is not supported by all processor types.
770=Image Space Exec Read Only
771=Image Space is the virtual address space in use by the images being executed by the process.  This is the sum of all the address space with this protection allocated by images run by the selected process  Execute/Read-Only memory is memory that can be executed as well as read.
772=Image Space Exec Read/Write
773=Image Space is the virtual address space in use by the images being executed by the process.  This is the sum of all the address space with this protection allocated by images run by the selected process  Execute/Read/Write memory is memory that can be executed by programs as well as read and written and modified.
774=Image Space Exec Write Copy
775=Image Space is the virtual address space in use by the images being executed by the process.  This is the sum of all the address space with this protection allocated by images run by the selected process  Execute Write Copy is memory that can be executed by programs as well as read and written.  This type of protection is used when memory needs to be shared between processes.  If the sharing processes only read the memory, then they will all use the same memory.  If a sharing process desires write access, then a copy of this memory will be made for that process.
776=Bytes Image Reserved
777=Bytes Image Reserved is the sum of all virtual memory reserved by images within this process.
778=Bytes Image Free
779=Bytes Image Free is the amount of virtual address space that is not in use or reserved by images within this process.
780=Bytes Reserved
781=Bytes Reserved is the total amount of virtual memory reserved for future use by this process.
782=Bytes Free
783=Bytes Free is the total unused virtual address space of this process.
784=ID Process
785=ID Process is the unique identifier of this process. ID Process numbers are reused, so they only identify a process for the lifetime of that process.
786=Process Address Space
787=The Process Address Space performance object consists of counters that monitor memory allocation and use  for a selected process.
788=No Access
789=Image Space is the virtual address space in use by the selected image with this protection.  No Access protection prevents a process from writing or reading these pages and will generate an access violation if either is attempted.
790=Read Only
791=Image Space is the virtual address space in use by the selected image with this protection.  Read Only protection prevents the contents of these pages from being modified.  Any attempts to write or modify these pages will generate an access violation.
792=Read/Write
793=Image Space is the virtual address space in use by the selected image with this protection.  Read/Write protection allows a process to read, modify and write to these pages.
794=Write Copy
795=Image Space is the virtual address space in use by the selected image with this protection.  Write Copy protection is used when memory is shared for reading but not for writing.  When processes are reading this memory, they can share the same memory, however, when a sharing process wants to have read/write access to this shared memory, a copy of that memory is made for writing to.
796=Executable
797=Image Space is the virtual address space in use by the selected image with this protection.  Executable memory is memory that can be executed by programs, but cannot be read or written.  This type of protection is not supported by all processor types.
798=Exec Read Only
799=Image Space is the virtual address space in use by the selected image with this protection.  Execute/Read Only memory is memory that can be executed as well as read.
800=Exec Read/Write
801=Image Space is the virtual address space in use by the selected image with this protection.  Execute/Read/Write memory is memory that can be executed by programs as well as read and written.
802=Exec Write Copy
803=Image Space is the virtual address space in use by the selected image with this protection.  Execute Write Copy is memory that can be executed by programs as well as read and written.  This type of protection is used when memory needs to be shared between processes.  If the sharing processes only read the memory, then they will all use the same memory.  If a sharing process desires write access, then a copy of this memory will be made for that process.
804=ID Thread
805=ID Thread is the unique identifier of this thread.  ID Thread numbers are reused, so they only identify a thread for the lifetime of that thread.
806=Mailslot Receives Failed
807=Mailslot Opens Failed/sec indicates the rate at which mailslot messages to be delivered to mailslots that are not present are received by this workstation.
808=Mailslot Writes Failed
809=Duplicate Master Announcements indicates the number of times that the master browser has detected another master browser on the same domain.
810=Mailslot Opens Failed/sec
811=Illegal Datagrams/sec is the rate at which incorrectly formatted datagrams have been received by the workstation.
812=Duplicate Master Announcements
813=Announcements Total/sec is the sum of Announcements Server/sec and Announcements Domain/sec.
814=Illegal Datagrams/sec
815=Enumerations Total/sec is the rate at which browse requests have been processed by this workstation.  This is the sum of Enumerations Server/sec, Enumerations Domain/sec, and Enumerations Other/sec.
816=Thread Details
817=The Thread Details performance object  consists of counters that measure aspects of thread behavior that are difficult or time-consuming or collect.  These counters are distinguished from those in the Thread object by their high overhead.
818=Cache Bytes
819=Cache Bytes is the sum of the Memory\\System Cache Resident Bytes, Memory\\System Driver Resident Bytes, Memory\\System Code Resident Bytes, and Memory\\Pool Paged Resident Bytes counters.  This counter displays the last observed value only; it is not an average.
820=Cache Bytes Peak
821=Cache Bytes Peak is the maximum number of bytes used by the file system cache since the system was last restarted. This might be larger than the current size of the cache. This counter displays the last observed value only; it is not an average.
822=Pages Input/sec
823=Pages Input/sec is the rate at which pages are read from disk to resolve hard page faults. Hard page faults occur when a process refers to a page in virtual memory that is not in its working set or elsewhere in physical memory, and must be retrieved from disk. When a page is faulted, the system tries to read multiple contiguous pages into memory to maximize the benefit of the read operation. Compare the value of Memory\\Pages Input/sec to the value of  Memory\\Page Reads/sec to determine the average number of pages read into memory during each read operation.
824=Transition Pages RePurposed/sec
825=Transition Pages RePurposed is the rate at which the number of transition cache pages were reused for a different purpose.  These pages would have otherwise remained in the page cache to provide a (fast) soft fault (instead of retrieving it from backing store) in the event the page was accessed in the future.  Note these pages can contain private or sharable memory.
872=Bytes Transmitted
873=The number of bytes transmitted total for this connection.
874=Bytes Received
875=The number of bytes received total for this connection.
876=Frames Transmitted
877=The number of data frames transmitted total for this connection.
878=Frames Received.
879=The number of data frames received total for this connection.
880=Percent Compression Out
881=The compression ratio for bytes being transmitted.
882=Percent Compression In
883=The compression ratio for bytes being received.
884=CRC Errors
885=The total number of CRC Errors for this connection.  CRC Errors occur when the frame received contains erroneous data.
886=Timeout Errors
887=The total number of Timeout Errors for this connection.  Timeout Errors occur when an expected is not received in time.
888=Serial Overrun Errors
889=The total number of Serial Overrun Errors for this connection.  Serial Overrun Errors occur when the hardware cannot handle the rate at which data is received.
890=Alignment Errors
891=The total number of Alignment Errors for this connection.  Alignment Errors occur when a byte received is different from the byte expected.
892=Buffer Overrun Errors
893=The total number of Buffer Overrun Errors for this connection.  Buffer Overrun Errors when the software cannot handle the rate at which data is received.
894=Total Errors
895=The total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors for this connection.
896=Bytes Transmitted/Sec
897=The number of bytes transmitted per second.
898=Bytes Received/Sec
899=The number of bytes received per second.
900=Frames Transmitted/Sec
901=The number of frames transmitted per second.
902=Frames Received/Sec
903=The number of frames received per second.
904=Total Errors/Sec
905=The total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors per second.
908=Total Connections
909=The total number of Remote Access connections.
920=WINS Server
921=The WINS Server performance object consists of counters that monitor communications using the WINS Server service.
922=Unique Registrations/sec
923=Unique Registrations/sec is the rate at which unique registration are received by the WINS server.
924=Group Registrations/sec
925=Group Registrations/sec is the rate at which group registration are received by the WINS server.
926=Total Number of Registrations/sec
927=Total Number of Registrations/sec is the sum of the Unique and Group registrations per sec.  This is the total rate at which registration are received by the WINS server.
928=Unique Renewals/sec
929=Unique Renewals/sec is the rate at which unique renewals are received by the WINS server.
930=Group Renewals/sec
931=Group Renewals/sec is the rate at which group renewals are received by the WINS server.
932=Total Number of Renewals/sec
933=Total Number of Renewals/sec is the sum of the Unique and Group renewals per sec.  This is the total rate at which renewals are received by the WINS server.
934=Releases/sec
935=Total Number of Releases/sec is the rate at which releases are received by the WINS server.
936=Queries/sec
937=Total Number of Queries/sec is the rate at which queries are received by the WINS server.
938=Unique Conflicts/sec
939=Unique Conflicts/sec is the rate at which unique registrations/renewals received by the WINS server resulted in conflicts with records in the database.
940=Group Conflicts/sec
941=Group Conflicts/sec is the rate at which group registration received by the WINS server resulted in conflicts with records in the database.
942=Total Number of Conflicts/sec
943=Total Number of Conflicts/sec is the sum of the Unique and Group conflicts per sec.  This is the total rate at which conflicts were seen by the WINS server.
944=Successful Releases/sec
945=Total Number of Successful Releases/sec
946=Failed Releases/sec
947=Total Number of Failed Releases/sec
948=Successful Queries/sec
949=Total Number of Successful Queries/sec
950=Failed Queries/sec
951=Total Number of Failed Queries/sec
952=Handle Count
953=The total number of handles currently open by this process. This number is equal to the sum of the handles currently open by each thread in this process.
1000=MacFile Server
1001=Services for Macintosh AFP File Server.
1002=Max Paged Memory
1003=The maximum amount of paged memory resources used by the MacFile Server.
1004=Current Paged Memory
1005=The current amount of paged memory resources used by the MacFile Server.
1006=Max NonPaged Memory
1007=The maximum amount of nonpaged memory resources use by the MacFile Server.
1008=Current NonPaged memory
1009=The current amount of nonpaged memory resources used by the MacFile Server.
1010=Current Sessions
1011=The number of sessions currently connected to the MacFile server.  Indicates current server activity.
1012=Maximum Sessions
1013=The maximum number of sessions connected at one time to the MacFile server.  Indicates usage level of server.
1014=Current Files Open
1015=The number of internal files currently open in the MacFile server.  This count does not include files opened on behalf of Macintosh clients.
1016=Maximum Files Open
1017=The maximum number of internal files open at one time in the MacFile server.  This count does not include files opened on behalf of Macintosh clients.
1018=Failed Logons
1019=The number of failed logon attempts to the MacFile server.  Can indicate whether password guessing programs are being used to crack the security on the server.
1020=Data Read/sec
1021=The number of bytes read from disk per second.
1022=Data Written/sec
1023=The number of bytes written to disk per second.
1024=Data Received/sec
1025=The number of bytes received from the network per second.  Indicates how busy the server is.
1026=Data Transmitted/sec
1027=The number of bytes sent on the network per second.  Indicates how busy the server is.
1028=Current Queue Length
1029=The number of outstanding work items waiting to be processed.
1030=Maximum Queue Length
1031=The maximum number of outstanding work items waiting at one time.
1032=Current Threads
1033=The current number of threads used by MacFile server.  Indicates how busy the server is.
1034=Maximum Threads
1035=The maximum number of threads used by MacFile server.  Indicates peak usage level of server.
1050=AppleTalk
1051=AppleTalk Protocol
1052=Packets In/sec
1053=Number of packets received per second by Appletalk on this port.
1054=Packets Out/sec
1055=Number of packets sent per second by Appletalk on this port.
1056=Bytes In/sec
1057=Number of bytes received per second by Appletalk on this port.
1058=Bytes Out/sec
1059=Number of bytes sent per second by Appletalk on this port.
1060=Average Time/DDP Packet
1061=Average time in milliseconds to process a DDP packet on this port.
1062=DDP Packets/sec
1063=Number of DDP packets per second received by Appletalk on this port.
1064=Average Time/AARP Packet
1065=Average time in milliseconds to process an AARP packet on this port.
1066=AARP Packets/sec
1067=Number of AARP packets per second received by Appletalk on this port.
1068=Average Time/ATP Packet
1069=Average time in milliseconds to process an ATP packet on this port.
1070=ATP Packets/sec
1071=Number of ATP packets per second received by Appletalk on this port.
1072=Average Time/NBP Packet
1073=Average time in milliseconds to process an NBP packet on this port.
1074=NBP Packets/sec
1075=Number of NBP packets per second received by Appletalk on this port.
1076=Average Time/ZIP Packet
1077=Average time in milliseconds to process a ZIP packet on this port.
1078=ZIP Packets/sec
1079=Number of ZIP packets per second received by Appletalk on this port.
1080=Average Time/RTMP Packet
1081=Average time in milliseconds to process an RTMP packet on this port.
1082=RTMP Packets/sec
1083=Number of RTMP packets per second received by Appletalk on this port.
1084=ATP Retries Local
1085=Number of ATP requests retransmitted on this port.
1086=ATP Response Timouts
1087=Number of ATP release timers that have expired on this port.
1088=ATP XO Response/Sec
1089=Number of ATP Exactly-once transaction responses per second on this port.
1090=ATP ALO Response/Sec
1091=Number of ATP At-least-once transaction responses per second on this port.
1092=ATP Recvd Release/Sec
1093=Number of ATP transaction release packets per second received on this port.
1094=Current NonPaged Pool
1095=The current amount of nonpaged memory resources used by AppleTalk.
1096=Packets Routed In/Sec
1097=Number of packets routed in on this port.
1098=Packets dropped
1099=Number of packets dropped due to resource limitations on this port.
1100=ATP Retries Remote
1101=Number of ATP requests retransmitted to this port.
1102=Packets Routed Out/Sec
1103=Number of packets routed out on this port.
1110=Network Segment
1111=Provides Network Statistics for the local network segment via the Network Monitor Service.
1112=Total frames received/second
1113=The total number of frames received per second on this network segment.
1114=Total bytes received/second
1115=The number of bytes received per second on this network segment.
1116=Broadcast frames received/second
1117=The number of Broadcast frames received per second on this network segment.
1118=Multicast frames received/second
1119=The number of Multicast frames received per second on this network segment.
1120=% Network utilization
1121=Percentage of network bandwidth in use on this network segment.
1124=% Broadcast Frames
1125=Percentage of network bandwidth which is made up of broadcast traffic on this network segment.
1126=% Multicast Frames
1127=Percentage of network bandwidth which is made up of multicast traffic on this network segment.
1150=Telephony
1151=The Telephony System
1152=Lines
1153=The number of telephone lines serviced by this computer.
1154=Telephone Devices
1155=The number of telephone devices serviced by this computer.
1156=Active Lines
1157=The number of telephone lines serviced by this computer that are currently active.
1158=Active Telephones
1159=The number of telephone devices that are currently being monitored.
1160=Outgoing Calls/sec
1161=The rate of outgoing calls made by this computer.
1162=Incoming Calls/sec
1163=The rate of incoming calls answered by this computer.
1164=Client Apps
1165=The number of applications that are currently using telephony services.
1166=Current Outgoing Calls
1167=Current outgoing calls being serviced by this computer.
1168=Current Incoming Calls
1169=Current incoming calls being serviced by this computer.
1232=Packet Burst Read NCP Count/sec
1233=Packet Burst Read NCP Count/sec is the rate of NetWare Core Protocol requests for Packet Burst Read.  Packet Burst is a windowing protocol that improves performance.
1234=Packet Burst Read Timeouts/sec
1235=Packet Burst Read Timeouts/sec is the rate the NetWare Service needs to retransmit a Burst Read Request because the NetWare server took too long to respond.
1236=Packet Burst Write NCP Count/sec
1237=Packet Burst Write NCP Count/sec is the rate of NetWare Core Protocol requests for Packet Burst Write.  Packet Burst is a windowing protocol that improves performance.
1238=Packet Burst Write Timeouts/sec
1239=Packet Burst Write Timeouts/sec is the rate the NetWare Service needs to retransmit a Burst Write Request because the NetWare server took too long to respond.
1240=Packet Burst IO/sec
1241=Packet Burst IO/sec is the sum of Packet Burst Read NCPs/sec and Packet Burst Write NCPs/sec.
1260=Logon Total
1261=Logon Total includes all interactive logons, network logons, service logons, successful logon, and failed logons since the machine is last rebooted.
1300=Server Work Queues
1301=The Server Work Queues performance object consists of counters that monitor the length of the queues and objects in the queues.
1302=Queue Length
1303=Queue Length is the current length of the server work queue for this CPU.  A sustained queue length greater than four might indicate processor congestion.  This is an instantaneous count, not an average over time.
1304=Active Threads
1305=Active Threads is the number of threads currently working on a request from the server client for this CPU.  The system keeps this number as low as possible to minimize unnecessary context switching.  This is an instantaneous count for the CPU, not an average over time.
1306=Available Threads
1307=Available Threads is the number of server threads on this CPU not currently working on requests from a client.  The server dynamically adjusts the number of threads to maximize server performance.
1308=Available Work Items
1309=Every request from a client is represented in the server as a 'work item,' and the server maintains a pool of available work items per CPU to speed processing.  This is the instantaneous number of available work items for this CPU.  A sustained near-zero value indicates the need to increase the MinFreeWorkItems registry value for the Server service.  This value will always be 0 in the Blocking Queue instance.
1310=Borrowed Work Items
1311=Every request from a client is represented in the server as a 'work item,' and the server maintains a pool of available work items per CPU to speed processing.  When a CPU runs out of work items, it borrows a free work item from another CPU.  An increasing value of this running counter might indicate the need to increase the 'MaxWorkItems' or 'MinFreeWorkItems' registry values for the Server service.  This value will always be 0 in the Blocking Queue instance.
1312=Work Item Shortages
1313=Every request from a client is represented in the server as a 'work item,' and the server maintains a pool of available work items per CPU to speed processing.  A sustained value greater than zero indicates the need to increase the 'MaxWorkItems' registry value for the Server service.  This value will always be 0 in the Blocking Queue instance.
1314=Current Clients
1315=Current Clients is the instantaneous count of the clients being serviced by this CPU.  The server actively balances the client load across all of the CPU's in the system.  This value will always be 0 in the Blocking Queue instance.
1317=The rate at which the Server is receiving bytes from the network clients on this CPU.  This value is a measure of how busy the Server is.
1319=The rate at which the Server is sending bytes to the network clients on this CPU.  This value is a measure of how busy the Server is.
1320=Bytes Transferred/sec
1321=The rate at which the Server is sending and receiving bytes with the network clients on this CPU.  This value is a measure of how busy the Server is.
1323=Read Operations/sec is the rate the server is performing file read operations for the clients on this CPU.  This value is a measure of how busy the Server is.  This value will always be 0 in the Blocking Queue instance.
1324=Read Bytes/sec
1325=Read Bytes/sec is the rate the server is reading data from files for the clients on this CPU.  This value is a measure of how busy the Server is.
1327=Write Operations/sec is the rate the server is performing file write operations for the clients on this CPU.  This value is a measure of how busy the Server is.  This value will always be 0 in the Blocking Queue instance.
1328=Write Bytes/sec
1329=Write Bytes/sec is the rate the server is writing data to files for the clients on this CPU.  This value is a measure of how busy the Server is.
1331=Total Bytes/sec is the rate the Server is reading and writing data to and from the files for the clients on this CPU.  This value is a measure of how busy the Server is.
1332=Total Operations/sec
1333=Total Operations/sec is the rate the Server is performing file read and file write operations for the clients on this CPU.  This value is a measure of how busy the Server is.  This value will always be 0 in the Blocking Queue instance.
1334=DPCs Queued/sec
1335=DPCs Queued/sec is the average rate, in incidents per second, at which deferred procedure calls (DPCs) were added to the processor's DPC queue. DPCs are interrupts that run at a lower priority than standard interrupts.  Each processor has its own DPC queue. This counter measures the rate that DPCs are added to the queue, not the number of DPCs in the queue.  This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
1336=DPC Rate
1337=DPC Rate is the rate at which deferred procedure calls (DPCs) were added to the processors DPC queues between the timer ticks of the processor clock. DPCs are interrupts that run at alower priority than standard interrupts.  Each processor has its own DPC queue. This counter measures the rate that DPCs were added to the queue, not the number of DPCs in the queue. This counter displays the last observed value only; it is not an average.
1342=Total DPCs Queued/sec
1343=Total DPCs Queued/sec is the combined rate at which deferred procedure calls (DPCs) are added to the DPC queue of all processors on the computer.  (DPCs are interrupts that run at a lower priority than standard interrupts). Each processor has its own DPC queue.  This counter measures the rate at which DPCs are added to the queue, not the number of DPCs in the queue.  It is the sum of Processor: DPCs Queued/sec for all processors on the computer, divided by the number of processors.  This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
1344=Total DPC Rate
1345=Total DPC Rate is the combined rate at which deferred procedure calls (DPCs) are added to the DPC queues of all processors between timer ticks of each processor's system clock.  (DPCs are interrupts that run at a lower priority than standard interrupts). Each processor has its own DPC queue.  This counter measures the rate at which DPCs are added to the queue, not the number of DPCs in the queue.  It is the sum of Processor: DPC Rate for all processors on the computer, divided by the number of processors.  This counter displays the last observed value only; it is not an average.
1350=% Registry Quota In Use
1351=% Registry Quota In Use is the percentage of the Total Registry Quota Allowed that is currently being used by the system.  This counter displays the current percentage value only; it is not an average.
1360=VL Memory
1361=Counters that indicate the status of local and system Very Large memory allocations.
1362=VLM % Virtual Size In Use
1363=VLM % Virtual Size In Use
1364=VLM Virtual Size
1365=Current size of the process VLM Virtual memory space in bytes.
1366=VLM Virtual Size Peak
1367=The peak size of the process VLM virtual memory space in bytes.  This value indicates the maximum size of the process VLM virtual memory since the process started.
1368=VLM Virtual Size Available
1369=The current size of the process VLM virtual memory space in bytes that may be allocated.  Note that the maximum allocation allowed may be smaller than this value due to fragmentation of the memory space.
1370=VLM Commit Charge
1371=The current size of committed VLM memory space for the current process in bytes.
1372=VLM Commit Charge Peak
1373=The peak size of the committed VLM memory space in bytes for the current process since the process started.
1374=System VLM Commit Charge
1375=The current size of all committed VLM memory space in bytes for the system.
1376=System VLM Commit Charge Peak
1377=The peak size of all committed VLM memory space in bytes since the system was started.
1378=System VLM Shared Commit Charge
1379=The current size of all committed shared VLM memory space in bytes for the system.
1380=Available KBytes
1381=Available KBytes is the amount of physical memory, in Kilobytes, immediately available for allocation to a process or for system use. It is equal to the sum of memory assigned to the standby (cached), free and zero page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit.
1382=Available MBytes
1383=Available MBytes is the amount of physical memory, in Megabytes, immediately available for allocation to a process or for system use. It is equal to the sum of memory assigned to the standby (cached), free and zero page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit.
1400=Avg. Disk Queue Length
1401=Avg. Disk Queue Length is the average number of both read and write requests that were queued for the selected disk during the sample interval.
1402=Avg. Disk Read Queue Length
1403=Avg. Disk Read Queue Length is the average number of read requests that were queued for the selected disk during the sample interval.
1404=Avg. Disk Write Queue Length
1405=Avg. Disk Write Queue Length is the average number of write requests that were queued for the selected disk during the sample interval.
1406=% Committed Bytes In Use
1407=% Committed Bytes In Use is the ratio of Memory\\Committed Bytes to the Memory\\Commit Limit. Committed memory is the physical memory in use for which space has been reserved in the paging file should it need to be written to disk. The commit limit is determined by the size of the paging file.  If the paging file is enlarged, the commit limit increases, and the ratio is reduced). This counter displays the current percentage value only; it is not an average.
1408=Full Image
1409=The Full Image performance object consists of counters that monitor the virtual address usage of images executed by processes on the computer.  Full Image counters are the same counters as contained in Image object with the only difference being the instance name.  In the Full Image object, the instance name includes the full file path name of the loaded modules, while in the Image object only the filename is displayed.
1410=Creating Process ID
1411=The Creating Process ID value is the Process ID of the process that created the process. The creating process may have terminated, so this value may no longer identify a running process.
1412=IO Read Operations/sec
1413=The rate at which the process is issuing read I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.
1414=IO Write Operations/sec
1415=The rate at which the process is issuing write I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.
1416=IO Data Operations/sec
1417=The rate at which the process is issuing read and write I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.
1418=IO Other Operations/sec
1419=The rate at which the process is issuing I/O operations that are neither read nor write operations (for example, a control function). This counter counts all I/O activity generated by the process to include file, network and device I/Os.
1420=IO Read Bytes/sec
1421=The rate at which the process is reading bytes from I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.
1422=IO Write Bytes/sec
1423=The rate at which the process is writing bytes to I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.
1424=IO Data Bytes/sec
1425=The rate at which the process is reading and writing bytes in I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.
1426=IO Other Bytes/sec
1427=The rate at which the process is issuing bytes to I/O operations that do not involve data such as control operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.
1450=Print Queue
1451=Displays performance statistics about a Print Queue.
1452=Total Jobs Printed
1453=Total number of jobs printed on a print queue since the last restart.
1454=Bytes Printed/sec
1455=Number of bytes per second printed on a print queue.
1456=Total Pages Printed
1457=Total number of pages printed through GDI on a print queue since the last restart.
1458=Jobs
1459=Current number of jobs in a print queue.
1460=References
1461=Current number of references (open handles) to this printer.
1462=Max References
1463=Peak number of references (open handles) to this printer.
1464=Jobs Spooling
1465=Current number of spooling jobs in a print queue.
1466=Max Jobs Spooling
1467=Maximum number of spooling jobs in a print queue since last restart.
1468=Out of Paper Errors
1469=Total number of out of paper errors in a print queue since the last restart.
1470=Not Ready Errors
1471=Total number of printer not ready errors in a print queue since the last restart.
1472=Job Errors
1473=Total number of job errors in a print queue since last restart.
1474=Enumerate Network Printer Calls
1475=Total number of calls from browse clients to this print server to request network browse lists since last restart.
1476=Add Network Printer Calls
1477=Total number of calls from other print servers to add shared network printers to this server since last restart.
1478=Working Set - Private
1479=Working Set - Private displays the size of the working set, in bytes, that is use for this process only and not shared nor sharable by other processes.
1480=Working Set - Shared
1481=Working Set - Shared displays the size of the working set, in bytes, that is sharable and may be used by other processes.  Because a portion of a process' working set is shareable, does not necessarily mean that other processes are using it.
1482=% Idle Time
1483=% Idle Time reports the percentage of time during the sample interval that the disk was idle.
1484=Split IO/Sec
1485=Split IO/Sec reports the rate at which I/Os to the disk were split into multiple I/Os. A split I/O may result from requesting data of a size that is too large to fit into a single I/O or that the disk is fragmented.
1500=Job Object
1501=Reports the accounting and processor usage data collected by each active named Job object.
1502=Current % Processor Time
1503=Current % Processor Time shows the percentage of the sample interval that the processes in the Job object spent executing code.
1504=Current % User Mode Time
1505=Current % User mode Time shows the percentage of the sample interval that the processes in the Job object spent executing code in user mode.
1506=Current % Kernel Mode Time
1507=Current % Kernel mode Time shows the percentage of the sample interval that the processes in the Job object spent executing code in kernel or privileged mode.
1508=This Period mSec - Processor
1509=This Period mSec - Processor shows the time, in milliseconds, of processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since a time limit on the Job was established.
1510=This Period mSec - User Mode
1511=This Period mSec - User mode shows the time, in milliseconds, of user mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since a time limit on the Job was established.
1512=This Period mSec - Kernel Mode
1513=This Period mSec - Kernel mode shows the time, in milliseconds, of kernel mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since a time limit on the Job was established.
1514=Pages/Sec
1515=Pages/Sec shows the page fault rate of all the processes in the Job object.
1516=Process Count - Total
1517=Process Count - Total shows the number of processes, both active and terminated, that are or have been associated with the Job object.
1518=Process Count - Active
1519=Process Count - Active shows the number of processes that are currently associated with the Job object.
1520=Process Count - Terminated
1521=Process Count - Terminated shows the number of processes that have been terminated because of a limit violation.
1522=Total mSec - Processor
1523=Total mSec - Processor shows the time, in milliseconds, of processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since the Job object was created.
1524=Total mSec - User Mode
1525=Total mSec - User mode shows the time, in milliseconds, of user mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since the Job object was created.
1526=Total mSec - Kernel Mode
1527=Total mSec - Kernel mode shows the time, in milliseconds, of kernel mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since the Job object was created.
1530=TCPv6
1532=UDPv6
1534=ICMPv6
1536=Received Packet Too Big
1537=Received Packet Too Big is the number of received packets thatare larger than anticipated.
1538=Received Membership Query
1539=Received Membership Query is the number of packets received thatquery their membership to a group.
1540=Received Membership Report
1541=Received Membership Report is the number of packets received thatreport their membership to a group.
1542=Received Membership Reduction
1543=Received Membership Reduction is the number of packets received thatcancelled their membership to a group.
1544=Received Router Solicit
1545=Received Router Solicit is the number of packets received thatsolicit the router.
1546=Received Router Advert
1547=Received Router Advert is the number of packets received thatadvert the router.
1548=Job Object Details
1549=% Job object Details shows detailed performance information about the active processes that make up a Job object.
1550=Received Neighbor Solicit
1551=Received Neighbor Solicit is the number of packets received thatsolicit a neighbor.
1552=Received Neighbor Advert
1553=Received Neighbor Advert is the number of packets received thatadvert a neighbor.
1554=Sent Packet Too Big
1555=Sent Packet Too Big is the number of sent packets thatare larger than anticipated.
1556=Sent Membership Query
1557=Sent Membership Query is the number of packets sent thatquery their membership to a group.
1558=Sent Membership Report
1559=Sent Membership Report is the number of packets sent thatreport their membership to a group.
1560=Sent Membership Reduction
1561=Sent Membership Reduction is the number of packets sent thatcancelled their membership to a group.
1562=Sent Router Solicit
1563=Sent Router Solicit is the number of packets sent thatsolicit the router.
1564=Sent Router Advert
1565=Sent Router Advert is the number of packets sent thatadvert the router.
1566=Sent Neighbor Solicit
1567=Sent Neighbor Solicit is the number of packets sent thatsolicit a neighbor.
1568=Sent Neighbor Advert
1569=Sent Neighbor Advert is the number of packets sent thatadvert a neighbor.
1570=Security System-Wide Statistics
1571=These counters track authentication performance on a per second basis.
1572=NTLM Authentications
1573=This counter tracks the number of NTLM authentications processed by this computer per second.
1574=Kerberos Authentications
1575=This counter tracks the number of times that clients use a ticket to authenticate to this computer per second.
1576=KDC AS Requests
1577=This counter tracks the number of Autonomous System (AS) requests that are being processed by the Key Distribution Center (KDC) per second. Clients use AS requests to obtain a ticket-granting ticket.
1578=KDC TGS Requests
1579=This counter tracks the number of ticket-granting service (TGS) requests that are being processed by the Key Distribution Center (KDC) per second. Clients use these TGS requests to obtain a service ticket, which allows a client to access resources on other computers.
1580=Schannel Session Cache Entries
1581=This counter tracks the number of Secure Sockets Layer (SSL) entries that are currently stored in the secure channel (Schannel) session cache.  The Schannel session cache stores information about successfully established sessions, such as SSL session IDs.  Clients can use this information to reconnect to a server without performing a full SSL handshake.
1582=Active Schannel Session Cache Entries
1583=This counter tracks the number of Secure Sockets Layer (SSL) entries that are currently stored in the secure channel (Schannel) session cache and that are currently in use.  The Schannel session cache stores information about successfully established sessions, such as SSL session IDs.  Clients can use this information to reconnect to a server without performaing a full SSL handshake.
1584=SSL Client-Side Full Handshakes
1585=This counter tracks the number of Secure Sockets Layer (SSL) full client-side handshakes that are being processed per second.  During a handshake, signals are exchanged to acknowledge that communication can occur between computers or other devices.
1586=SSL Client-Side Reconnect Handshakes
1587=This counter tracks the number of Secure Sockets Layer (SSL) client-side reconnect handshakes that are being processed per second.  Reconnect handshakes allow session keys from previous SSL sessions to be used to resume a client/server connection, and they require less memory to process than full handshakes.
1588=SSL Server-Side Full Handshakes
1589=This counter tracks the number of Secure Sockets Layer (SSL) full server-side handshakes that are being processed per second.  During a handshake, signals are exchanged to acknowledge that communication can occur between computers or other devices.
1590=SSL Server-Side Reconnect Handshakes
1591=This counter tracks the number of Secure Sockets Layer (SSL) server-side reconnect handshakes that are being processed per second.  Reconnect handshakes allow session keys from previous SSL sessions to be used to resume a client/server connection, and they require less memory to process than full handshakes.
1592=Digest Authentications
1593=This counter tracks the number of Digest authentications that are being processed per second.
1670=Security Per-Process Statistics
1671=These counters track the number of security resources and handles used per process.
1672=Credential Handles
1673=This counter tracks the number of credential handles in use by a given process.  Credential handles are handles to pre-existing credentials, such as a password, that are associated with a user and are established through a system logon.
1674=Context Handles
1675=This counter tracks the number of context handles in use by a given process.  Context handles are associated with security contexts established between a client application and a remote peer.
1676=Free & Zero Page List Bytes
1677=Free & Zero Page List Bytes is the amount of physical memory, in bytes, that is assigned to the free and zero page lists. This memory does not contain cached data. It is immediately available for allocation to a process or for system use. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit.
1678=Modified Page List Bytes
1679=Modified Page List Bytes is the amount of physical memory, in bytes, that is assigned to the modified page list. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. This memory needs to be written out before it will be available for allocation to a process or for system use. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit.
1680=Standby Cache Reserve Bytes
1681=Standby Cache Reserve Bytes is the amount of physical memory, in bytes, that is assigned to the reserve standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit.
1682=Standby Cache Normal Priority Bytes
1683=Standby Cache Normal Priority Bytes is the amount of physical memory, in bytes, that is assigned to the normal priority standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit.
1684=Standby Cache Core Bytes
1685=Standby Cache Core Bytes is the amount of physical memory, in bytes, that is assigned to the core standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit.
1746=% Idle Time
1747=% Idle Time is the percentage of time the processor is idle during the sample interval
1748=% C1 Time
1749=% C1 Time is the percentage of time the processor spends in the C1 low-power idle state. % C1 Time is a subset of the total processor idle time. C1 low-power idle state enables the processor to maintain its entire context and quickly return to the running state. Not all systems support the % C1 state.
1750=% C2 Time
1751=% C2 Time is the percentage of time the processor spends in the C2 low-power idle state. % C2 Time is a subset of the total processor idle time. C2 low-power idle state enables the processor to maintain the context of the system caches. The C2 power state is a lower power and higher exit latency state than C1. Not all systems support the C2 state.
1752=% C3 Time
1753=% C3 Time is the percentage of time the processor spends in the C3 low-power idle state. % C3 Time is a subset of the total processor idle time. When the processor is in the C3 low-power idle state it is unable to maintain the coherency of its caches. The C3 power state is a lower power and higher exit latency state than C2. Not all systems support the C3 state.
1754=C1 Transitions/sec
1755=C1 Transitions/sec is the rate that the CPU enters the C1 low-power idle state. The CPU enters the C1 state when it is sufficiently idle and exits this state on any interrupt. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
1756=C2 Transitions/sec
1757=C2 Transitions/sec is the rate that the CPU enters the C2 low-power idle state. The CPU enters the C2 state when it is sufficiently idle and exits this state on any interrupt. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
1758=C3 Transitions/sec
1759=C3 Transitions/sec is the rate that the CPU enters the C3 low-power idle state. The CPU enters the C3 state when it is sufficiently idle and exits this state on any interrupt. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
1760=Heap
1761=Heap performance counters for must used heaps
1762=Committed Bytes
1763=Memory actively used by this heap (FreeBytes + AllocatedBytes)
1764=Reserved Bytes
1765=Total virtual address space reserved for this heap (includes uncommitted ranges)
1766=Virtual Bytes
1767=ReservedBytes minus last uncommitted range in each segment
1768=Free Bytes
1769=Memory on freelists in this heap (does not include uncommitted ranges or blocks in heap cache)
1770=Free List Length
1771=Number of blocks on the list of free blocks >1k in size
1772=Avg. alloc rate
1773=1/Average time per allocation (excluding allocs from heap cache)
1774=Avg. free rate
1775=1/Average time per free (excluding frees to heap cache)
1776=Uncommitted Ranges Length
1777=Number of uncommitted ranges in the reserved virtual address
1778=Allocs - Frees
1779=Difference between number of allocations and frees (for leak detection)
1780=Cached Allocs/sec
1781=Allocations/sec from heap cache
1782=Cached Frees/sec
1783=Frees/sec from heap cache
1784=Allocs <1K/sec
1785=Allocations/sec of size <1k bytes (including heap cache)
1786=Frees <1K/sec
1787=Frees/sec of size <1k bytes (including heap cache)
1788=Allocs 1-8K/sec
1789=Allocations/sec of size 1-8k bytes
1790=Frees 1-8K/sec
1791=Frees/sec of size 1-8k bytes
1792=Allocs over 8K/sec
1793=Allocations/sec of size over 8k bytes
1794=Frees over 8K/sec
1795=Frees/sec of size over 8k bytes
1796=Total Allocs/sec
1797=Allocations/sec (including from heap cache)
1798=Total Frees/sec
1799=Frees/sec (including to heap cache)
1800=Blocks in Heap Cache
1801=Total number of blocks in the heap cache
1802=Largest Cache Depth
1803=Largest number of blocks of any one size in the heap cache
1804=% Fragmentation
1805=(FreeBytes / CommittedBytes) *100
1806=% VAFragmentation
1807=(VirtualBytes / ReservedBytes) * 100
1808=Heap Lock contention
1809=Collisions/sec on the heap lock
1846=End Marker
1847=End Marker
2182=RAS Port
2183=The RAS Object Type handles individual ports of the RAS device on your system.
2184=Bytes Transmitted
2185=The number of bytes transmitted total for this connection.
2186=Bytes Received
2187=The number of bytes received total for this connection.
2188=Frames Transmitted
2189=The number of data frames transmitted total for this connection.
2190=Frames Received
2191=The number of data frames received total for this connection.
2192=Percent Compression Out
2193=The compression ratio for bytes being transmitted.
2194=Percent Compression In
2195=The compression ratio for bytes being received.
2196=CRC Errors
2197=The total number of CRC Errors for this connection.  CRC Errors occur when the frame received contains erroneous data.
2198=Timeout Errors
2199=The total number of Timeout Errors for this connection.  Timeout Errors occur when an expected is not received in time.
2200=Serial Overrun Errors
2201=The total number of Serial Overrun Errors for this connection.  Serial Overrun Errors occur when the hardware cannot handle the rate at which data is received.
2202=Alignment Errors
2203=The total number of Alignment Errors for this connection.  Alignment Errors occur when a byte received is different from the byte expected.
2204=Buffer Overrun Errors
2205=The total number of Buffer Overrun Errors for this connection.  Buffer Overrun Errors when the software cannot handle the rate at which data is received.
2206=Total Errors
2207=The total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors for this connection.
2208=Bytes Transmitted/Sec
2209=The number of bytes transmitted per second.
2210=Bytes Received/Sec
2211=The number of bytes received per second.
2212=Frames Transmitted/Sec
2213=The number of frames transmitted per second.
2214=Frames Received/Sec
2215=The number of frames received per second.
2216=Total Errors/Sec
2217=The total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors per second.
2218=RAS Total
2219=The RAS Object Type handles all combined ports of the RAS device on your system.
2220=Total Connections
2221=The total number of Remote Access connections.
2222=BITS Net Utilization
2223=BITS Per Job Network Utilization
2224=Remote Server Speed (Bits/Sec)
2225=Estimate of Remote Server Speed (Bits/Sec)
2226=Netcard Speed (Bits/Sec)
2227=Estimate of the local netcard's speed (Bits/Sec)
2228=Percent Netcard Free
2229=Estimate of most recent percent network interface utilization
2230=IGD Speed (Bits/Sec)
2231=Estimate of the IGD's Internet connection speed (Bits/Sec)
2232=Percent IGD Free
2233=Estimate of most recent percent IGD Internet connection utilization
2234=BITS Download BlockSize (Bytes)
2235=Size of the next download block for BITS
2236=BITS Download Response Interval (msec)
2237=BITS download response interval (msec)
2238=Estimated bandwidth available to the remote system (Bits/sec)
2239=Estimated bandwidth available to the remote system (Bits/sec)
2240=Telephony
2241=The Telphony System
2242=Number of Lines
2243=The number of telephone lines serviced by this computer.
2244=Number of Telephone devices
2245=The number of telephone devices serviced by this computer.
2246=Number of Active Lines
2247=the number of telephone lines serviced by this computer that are currently active.
2248=Number of Active Telephones
2249=The number of telephone devices that are currently being monitored.
2250=Outgoing calls/sec
2251=The rate of outgoing calls made by this computer.
2252=Incoming calls/sec
2253=The rate of incoming calls answered by this computer.
2254=Number of Client Apps
2255=The number of applications that are currently using telephony services.
2256=Current Outgoing Calls
2257=Current outgoing calls being serviced by this computer.
2258=Current Incoming Calls
2259=Current incoming calls being serviced by this computer.
2268=Database
2269=Database provides performance statistics for each process using the ESE high performance embedded database management system.
2270=Pages Converted/sec
2271=Pages Converted/sec is the count of times per second a database page is converted from an older database format
2272=Pages Converted
2273=Pages Converted is the count of database pages that have been converted from an older format
2274=Records Converted/sec
2275=Records Converted/sec is the count of times per second a database record is converted from an older database format
2276=Records Converted
2277=Records Converted is the count of database records that have been converted from an older format
2278=Heap Allocs/sec
2279=Heap Allocs/sec is the number of memory allocations from the MP Heaps per second.  [Dev Only]
2280=Heap Frees/sec
2281=Heap Frees/sec is the number of memory frees to the MP Heaps per second.  [Dev Only]
2282=Heap Allocations
2283=Heap Allocations is the current number of memory allocations in the MP Heaps.  [Dev Only]
2284=Heap Bytes Allocated
2285=Heap Bytes Allocated is the size of all memory allocations in the MP Heaps discounting heap managemnt overhead.  [Dev Only]
2286=Page Bytes Reserved
2287=Page Bytes Reserved is the size of all explicitly reserved virtual address space.  [Dev Only]
2288=Page Bytes Committed
2289=Page Bytes Committed is the size of all explicitly committed virtual memory backing store (page file and physical memory).  [Dev Only]
2290=FCB Asynchronous Scan/sec
2291=FCB Asynchronous Scan/sec is the number of cached schema records (FCBs) scanned during asynchronous schema record cleanup. These records are scanned to age out older schema definitions. [Dev Only]
2292=FCB Asynchronous Purge/sec
2293=FCB Asynchronous Purge/sec is the number of cached schema records (FCBs) purged during asynchronous schema record cleanup. These records are purged to age out older schema definitions. [Dev Only]
2294=FCB Asynchronous Threshold-Scan/sec
2295=FCB Asynchronous Threshold-Scan/sec is the number of cached schema records (FCBs) scanned during asynchronous schema record cleanup.  Cleanup was triggered by a large number of schema records above the preferred limit.  These records are aggressively scanned to age out older schema definitions.  [Dev Only]
2296=FCB Asynchronous Threshold-Purge/sec
2297=FCB Asynchronous Threshold-Purge/sec is the number of cached schema records (FCBs) purged during asynchronous schema record cleanup.  Cleanup was triggered by a large number of schema records above the preferred limit.  These records are aggressively purged to age out older schema definitions.  [Dev Only]
2298=FCB Asynchronous Purge Conflicts/sec
2299=FCB Asynchronous Purge Conflicts/sec is the number of failed purge attempts on cached schema records (FCBs) during asynchronous schema record cleanup.  The purge operation failed because exclusive ownership of the schema record could not be obtained.  [Dev Only]
2300=FCB Synchronous Purge/sec
2301=FCB Synchronous Purge/sec is the number of cached schema records (FCBs) being synchronously purged each second.  [Dev Only]
2302=FCB Synchronous Purge Stalls/sec
2303=FCB Synchronous Purge Stalls/sec is the number of stalls encountered while waiting for exclusive ownership of cached schema records (FCBs) in order to synchronously purge them.  [Dev Only]
2304=FCB Allocations Wait For Version Cleanup/sec
2305=FCB Allocations Wait For Version Cleanup/sec is the number FCB allocations that must first wait for version cleanup in an attempt to free used FCBs for re-use. [Dev Only]
2306=FCB Purge On Cursor Close/sec
2307=FCB Purge On Cursor Close/sec is the number of cached schema records (FCBs) being synchronously purged when the cursor is closed (instead of leaving the schema record cached) each second.  [Dev Only]
2308=FCB Cache % Hit
2309=FCB Cache % Hit is the percentage of schema records (FCBs) opened directly from the schema record cache.  No file operations were required.  [Dev Only]
2310=No name
2311=No text
2312=FCB Cache Stalls/sec
2313=FCB Cache Stalls/sec is the number of stalls encountered while waiting for exclusive ownership of cached schema records (FCBs) in order to update their reference count.  [Dev Only]
2314=FCB Cache Maximum
2315=FCB Cache Maximum is the absolute maximum number of the schema records (FCBs) that can exist in the cache.  [Dev Only]
2316=FCB Cache Preferred
2317=FCB Cache Preferred is the preferred maximum number of the schema records (FCBs) that should exist in the cache.  [Dev Only]
2318=FCB Cache Allocated
2319=FCB Cache Allocated is the number of cached schema records (FCBs) currently allocated and in use.  [Dev Only]
2320=FCB Cache Available
2321=FCB Cache Available is the number of cached schema records (FCBs) currently allocated but not in use.  These records will be used and/or purged as required.  [Dev Only]
2322=Sessions In Use
2323=Sessions In Use is the number of database sessions currently open for use by client threads.  [Dev Only]
2324=Sessions % Used
2325=Sessions % Used is the percentage of database sessions currently open for use by client threads.  [Dev Only]
2326=No name
2327=No text
2328=Table Open Cache % Hit
2329=Table Open Cache % Hit is the percentage of database tables opened using cached schema information.  If this percentage is too low, the table cache size may be too small.
2330=No name
2331=No text
2332=Table Open Cache Hits/sec
2333=Table Open Cache Hits/sec is the number of database tables opened using cached schema information per second.  If this rate is too low, the table cache size may be too small.
2334=Table Open Cache Misses/sec
2335=Table Open Cache Misses/sec is the number of database tables opened without using cached schema information per second.  If this rate is too high, the table cache size may be too small.
2336=Table Opens/sec
2337=Table Opens/sec is the number of database tables opened per second.
2338=Log Bytes Write/sec
2339=Log Bytes Write per second is the rate bytes are written to the log.
2340=Log Buffer Bytes Used
2341=Log Buffer Bytes Used is the amount of bytes in the log buffers that have not yet been flushed to the logs.  [Dev only]
2342=Log Buffer Bytes Free
2343=Log Buffer Bytes Free is the amount of free space available in the log buffers.  [Dev only]
2344=Log Threads Waiting
2345=Log Threads Waiting is the number of threads waiting for their data to be written to the log in order to complete an update of the database.  If this number is too high, the log may be a bottleneck.
2346=Log Checkpoint Depth
2347=Log Checkpoint Depth represents the amount of work, in bytes, that will need to be redone or undone to the database file(s) if the process crashes.  [Dev Only]
2348=Log Generation Checkpoint Depth
2349=Log Generation Checkpoint Depth represents the amount of work, in count of log files, that will need to be redone or undone to the database file(s) if the process crashes.  [Dev Only]
2350=User Read Only Transaction Commits to Level 0/sec
2351=User Read Only Transaction Commits to Level 0/sec is the count of fully committed transactions started by the calling process that do not modify any data stored in the database engine.  [Dev Only]
2352=User Read/Write Transaction Commits to Level 0/sec
2353=User Read/Write Transaction Commits to Level 0/sec is the count of fully committed transactions started by the calling process that modify data stored in the database engine.  [Dev Only]
2354=User Transaction Commits to Level 0/sec
2355=User Transaction Commits to Level 0/sec is the count of fully committed transactions started by the calling process that access data stored in the database engine.  [Dev Only]
2356=User Read Only Transaction Rollbacks to Level 0/sec
2357=User Read Only Transaction Rollbacks to Level 0/sec is the count of aborted transactions started by the calling process that do not modify any data stored in the database engine.  [Dev Only]
2358=User Read/Write Transaction Rollbacks to Level 0/sec
2359=User Read/Write Transaction Rollbacks to Level 0/sec is the count of aborted transactions started by the calling process that modify data stored in the database engine.  [Dev Only]
2360=User Transaction Rollbacks to Level 0/sec
2361=User Transaction Rollbacks to Level 0/sec is the count of aborted transactions started by the calling process that access data stored in the database engine.  [Dev Only]
2362=System Read Only Transaction Commits to Level 0/sec
2363=System Read Only Transaction Commits to Level 0/sec is the count of fully committed transactions started internally that do not modify any data stored in the database engine.  [Dev Only]
2364=System Read/Write Transaction Commits to Level 0/sec
2365=System Read/Write Transaction Commits to Level 0/sec is the count of fully committed transactions started internally that modify data stored in the database engine.  [Dev Only]
2366=System Transaction Commits to Level 0/sec
2367=System Transaction Commits to Level 0/sec is the count of fully committed transactions started internally that access data stored in the database engine.  [Dev Only]
2368=System Read Only Transaction Rollbacks to Level 0/sec
2369=System Read Only Transaction Rollbacks to Level 0/sec is the count of aborted transactions started internally that do not modify any data stored in the database engine.  [Dev Only]
2370=System Read/Write Transaction Rollbacks to Level 0/sec
2371=System Read/Write Transaction Rollbacks to Level 0/sec is the count of aborted transactions started internally that modify data stored in the database engine.  [Dev Only]
2372=System Transaction Rollbacks to Level 0/sec
2373=System Transaction Rollbacks to Level 0/sec is the count of aborted transactions started internally that access data stored in the database engine.  [Dev Only]
2374=Database Page Allocation File Extension Async Consumed/sec
2375=Database Page Allocation File Extension Async Consumed/sec is the rate of page allocations from a database file that must be serviced by extending the database file, but which do not stall when doing doing so.  [Dev Only]
2376=Database Page Allocation File Extension Stalls/sec
2377=Database Page Allocation File Extension Stalls/sec is the rate of page allocations from a database file that must be serviced by extending the database file and which stall when doing so.  [Dev Only]
2378=Log Records/sec
2379=Log Records/sec is the count of records written to the database log buffers per second.  [Dev Only]
2380=Log Buffer Capacity Flushes/sec
2381=Log Buffer Capacity Flushes/sec is the count of times the database log buffers must be flushed per second because they are full.  [Dev Only]
2382=Log Buffer Commit Flushes/sec
2383=Log Buffer Commit Flushes/sec is the count of times the database log buffers must be flushed per second because a transaction is fully committing its changes.  [Dev Only]
2384=Log Buffer Flushes/sec
2385=Log Buffer Flushes/sec is the count of times the database log buffers must be flushed per second.
2386=Log Writes/sec
2387=Log Writes/sec is the number of times the log buffers are written to the log file(s) per second.  If this number approaches the maximum write rate for the media holding the log file(s), the log may be a bottleneck.
2388=Log Record Stalls/sec
2389=Log Record Stalls/sec is the number of log records that cannot be added to the log buffers per second because they are full.  If this counter is non-zero most of the time, the log buffer size may be a bottleneck.
2390=Version buckets allocated
2391=Total number of version buckets allocated
2392=Version buckets allocated for deletes
2393=Total number of version buckets allocated for FlagDelete RCEs  [Dev Only]
2394=VER Bucket Allocations Wait For Version Cleanup/sec
2395=VER Bucket Allocations Wait For Version Cleanup/sec is the number of version bucket allocations that must first wait for version cleanup in an attempt to free used version buckets  for re-use. [Dev Only]
2396=Version store average RCE bookmark length
2397=Average length of bookmark in RCE  [Dev Only]
2398=Version store unnecessary calls/sec
2399=Number of times per second we look in the version store for a node whose version bit is set but which has no versions  [Dev Only]
2400=Version store cleanup tasks asynchronously dispatched/sec
2401=Number of times per second a version store clean task is dispatched asynchronously to be performed  [Dev Only]
2402=Version store cleanup tasks synchronously dispatched/sec
2403=Number of times per second a version store clean task is performed synchronously  [Dev Only]
2404=Version store cleanup tasks discarded/sec
2405=Number of times per second a version store clean task was discarded due to load concerns  [Dev Only]
2406=Version store cleanup tasks failures/sec
2407=Number of times per second a dispatched version store cleanup task fails  [Dev Only]
2408=Record Inserts/sec
2409=Record Inserts/sec is the rate at which records are being inserted into database tables.  [Dev Only]
2410=Record Deletes/sec
2411=Record Deletes/sec is the rate at which records in database tables are being flagged for deletion.  [Dev Only]
2412=Record Replaces/sec
2413=Record Deletes/sec is the rate at which records in database tables are being updated.  [Dev Only]
2414=Record Unnecessary Replaces/sec
2415=Record Unnecessary Replaces/sec is the rate at which updates to records in database tables are being discarded because the update did not actually modify the contents of the record.  [Dev Only]
2416=Record Redundant Replaces/sec
2417=Record Redundant Replaces/sec is the rate at which records in database tables are being updated with the exact same content of the original record.  [Dev Only]
2418=Record Escrow-Updates/sec
2419=Record Escrow-Updates/sec is the rate at which records in database tables are being escrow-updated.  [Dev Only]
2420=Secondary Index Inserts/sec
2421=Secondary Index Inserts/sec is the rate at which entries are being inserted into indexes of database tables.  [Dev Only]
2422=Secondary Index Deletes/sec
2423=Secondary Index Deletes/sec is the rate at which entries in indexes of database tables are being flagged for deletion.  [Dev Only]
2424=False Index Column Updates/sec
2425=False Index Column Updates/sec is the number of times per second an attempt was made to update an index because an update to at least one of the indexed columns was detected, only to discover that none of the indexed columns had actually changed (and therefore no index update was actually required).  [Dev Only]
2426=False Tuple Index Column Updates/sec
2427=False Tuple Index Column Updates/sec is the number of times per second an attempt was made to update a tuple index because an update to the tuple-indexed column was detected, only to discover that the column had not actually changed (and therefore no index update was actually required).  [Dev Only]
2428=Record Intrinsic Long-Values Updated/sec
2429=Record Intrinsic Long-Values Updated/sec is the rate at which intrinsic long-values are added to or replaced in records of database tables.  [Dev Only]
2430=Record Separated Long-Values Added/sec
2431=Record Separated Long-Values Added/sec is the rate at which separated long-values are normally added to records of database tables.  [Dev Only]
2432=Record Separated Long-Values Forced/sec
2433=Record Separated Long-Values Forced/sec is the rate at which separated long-values are added to records of a database table because they could not be accommodated in the record itself.  [Dev Only]
2434=Record Separated Long-Values All Forced/sec
2435=Record Separated Long-Values All Forced/sec is the rate at which all intrinsic long-values are separated out of a record of a database table in order to accommodate updates to the record.  [Dev Only]
2436=Record Separated Long-Values Reference All/sec
2437=Record Separated Long-Values Reference All/sec is the rate at which a reference is added for all the separated long-values associated with a record of a database table.  [Dev Only]
2438=Record Separated Long-Values Dereference All/sec
2439=Record Separated Long-Values Dereference All/sec is the rate at which a reference is removed for all the separated long-values associated with a record of a database table.  [Dev Only]
2440=Separated Long-Value Seeks/sec
2441=Separated Long-Value Seeks/sec is the rate at which seeks for a separated long-value in a database table are performed.  [Dev Only]
2442=Separated Long-Value Retrieves/sec
2443=Separated Long-Value Retrieves/sec is the rate at which retrievals of a separated long-value in a database table are performed.  [Dev Only]
2444=Separated Long-Value Creates/sec
2445=Separated Long-Value Creates/sec is the rate at which new separated long-values are added to a database table.  [Dev Only]
2446=Separated Long-Value Updates/sec
2447=Separated Long-Value Updates/sec is the rate at which existing separated long-values in a database table are modified.  [Dev Only]
2448=Separated Long-Value Deletes/sec
2449=Separated Long-Value Deletes/sec is the rate at which separated long-values in a database table are flagged for deletion.  [Dev Only]
2450=Separated Long-Value Copies/sec
2451=Separated Long-Value Copies/sec is the rate at which existing separated long-values in a database table are copied.  [Dev Only]
2452=Separated Long-Value Chunk Seeks/sec
2453=Separated Long-Value Chunk Seeks/sec is the rate at which seeks for a particular chunk of a separated long-value in a database table are performed.  [Dev Only]
2454=Separated Long-Value Chunk Retrieves/sec
2455=Separated Long-Value Chunk Retrieves/sec is the rate at which retrievals of a chunk of a separated long-value in a database table are performed.  [Dev Only]
2456=Separated Long-Value Chunk Appends/sec
2457=Separated Long-Value Chunk Appends/sec is the rate at which chunks are appended to separated long-values of database tables.  [Dev Only]
2458=Separated Long-Value Chunk Replaces/sec
2459=Separated Long-Value Chunk Replaces/sec is the rate at which existing separated long-value chunks in a database table are replaced.  [Dev Only]
2460=Separated Long-Value Chunk Deletes/sec
2461=Separated Long-Value Chunk Deletes/sec is the rate at which separated long-value chunks in a database table are flagged for deletion.  [Dev Only]
2462=Separated Long-Value Chunk Copies/sec
2463=Separated Long-Value Chunk Copies/sec is the rate at which existing separated long-value chunks in a database table are copied.  [Dev Only]
2464=B+ Tree Append Splits/sec
2465=B+ Tree Append Splits/sec is the count of times a page is appended to a database B+ Tree per second.  [Dev Only]
2466=B+ Tree Right Splits/sec
2467=B+ Tree Right Splits/sec is the count of times a page is split right in a database B+ Tree per second.  [Dev Only]
2468=B+ Tree Right Hotpoint Splits/sec
2469=B+ Tree Right Hotpoint Splits/sec is the count of times a page is split right in a database B+ Tree, but which is treated as an append at a local "hotpoint" in the B+ Tree per second.  [Dev Only]
2470=B+ Tree Vertical Splits/sec
2471=B+ Tree Vertical Splits/sec is the count of times a page is split vertically in a database B+ Tree per second.  [Dev Only]
2472=B+ Tree Splits/sec
2473=B+ Tree Splits/sec is the count of times a page is appended to or split in a database B+ Tree per second.  [Dev Only]
2474=B+ Tree Empty Page Merges/sec
2475=B+ Tree Empty Page Merges/sec is the count of empty pages removed from a database B+ Tree per second.  [Dev Only]
2476=B+ Tree Right Merges/sec
2477=Right Merges/sec is the count of pages removed from a database B+ Tree per second by moving all its records to the next page to the right.  [Dev Only]
2478=B+ Tree Partial Merges/sec
2479=B+ Tree Partial Merges/sec is the count of pages where some of its records are moved to a page on the right in a database B+ Tree per second.  [Dev Only]
2480=B+ Tree Merges/sec
2481=B+ Tree Merges/sec is the count of pages merged in a database B+ Tree per second.  [Dev Only]
2482=B+ Tree Failed Simple Page Cleanup Attempts/sec
2483=B+ Tree Failed Simple Page Cleanup Attempts/sec is the rate that attempts to reclaim deleted node space on a page are unsuccessful due to a conflict when attempting to write-latch the page. The cleanup is re-tried by locking the root of the B+ Tree.  [Dev Only]
2484=B+ Tree Seek Short Circuits/sec
2485=B+ Tree Seek Short Circuits/sec is the count of repeated seeks to the same record in a database B+ Tree that are saved by jumping directly to the cached physical location of that record per second.  [Dev Only]
2486=B+ Tree Unnecessary Sibling Latches/sec
2487=B+ Tree Unnecessary Sibling Latches/sec is the count of sibling pages latched during a database B+ Tree Delete in the hopes of performing a merge where a merge is not possible, making that latch unnecessary.  [Dev Only]
2488=B+ Tree Move Nexts/sec
2489=B+ Tree Move Nexts/sec is the count of times the database engine moves to the next record in a B+ Tree per second.  [Dev Only]
2490=B+ Tree Move Nexts (Non-Visible Nodes Skipped)/sec
2491=B+ Tree Move Nexts (Non-Visible Nodes Skipped)/sec is the count of times the database engine skips non-visible records while attempting to move to the next visible record in a B+ Tree per second.  [Dev Only]
2492=B+ Tree Move Prevs/sec
2493=B+ Tree Move Prevs/sec is the count of times the database engine moves to the previous record in a B+ Tree per second.  [Dev Only]
2494=B+ Tree Move Prevs (Non-Visible Nodes Skipped)/sec
2495=B+ Tree Move Prevs (Non-Visible Nodes Skipped)/sec is the count of times the database engine skips non-visible records while attempting to move to the previous visible record in a B+ Tree per second.  [Dev Only]
2496=B+ Tree Seeks/sec
2497=B+ Tree Seeks/sec is the count of times a record is seeked to by a key in a database B+ Tree per second.  [Dev Only]
2498=B+ Tree Inserts/sec
2499=B+ Tree Inserts/sec is the count of times a record is inserted in a database B+ Tree per second.  [Dev Only]
2500=B+ Tree Replaces/sec
2501=B+ Tree Replaces/sec is the count of times a record is replaced in a database B+ Tree per second.  [Dev Only]
2502=B+ Tree Flag Deletes/sec
2503=B+ Tree Flag Deletes/sec is the count of times a record is flag deleted in a database B+ Tree per second.  [Dev Only]
2504=B+ Tree Deletes/sec
2505=B+ Tree Deletes/sec is the count of times a record is deleted in a database B+ Tree per second.  [Dev Only]
2506=B+ Tree Appends/sec
2507=B+ Tree Appends/sec is the count of times a record is appended to a database B+ Tree per second.  [Dev Only]
2508=B+ Tree Creates/sec
2509=B+ Tree Creates/sec is the number of B+ Trees and their corresponding space trees (if any) created per second.  This can also be viewed as the number of FDP creates per second.  [Dev Only]
2510=B+ Tree Creates (Total)
2511=B+ Tree Creates (Total) is the total number of B+ Trees and their corresponding space trees (if any) created.  This can also be viewed as the total number of FDP creates.  [Dev Only]
2512=B+ Tree Destroys/sec
2513=B+ Tree Destroys/sec is the number of B+ Trees and their corresponding space trees (if any) destroyed per second.  This can also be viewed as the number of FDP destroys per second.  [Dev Only]
2514=B+ Tree Destroys (Total)
2515=B+ Tree Destroys (Total) is the total number of B+ Trees and their corresponding space trees (if any) destroyed.  This can also be viewed as the total number of FDP destroys.  [Dev Only]
2516=Database Cache % Hit
2517=Database Cache % Hit is the percentage of database file page requests that were fulfilled by the database cache without causing a file operation.  If this percentage is too low, the database cache size may be too small.
2518=No name
2519=No text
2520=Database Cache % Clean
2521=Database Cache % Clean is the percentage of the database cache that does not contain modified data.  [Dev Only]
2522=No name
2523=No text
2524=Database Pages Read Async/sec
2525=Database Pages Read Async/sec is the rate that pages are asynchronously read from the database file(s) into the database cache.  [Dev Only]
2526=Database Pages Read Sync/sec
2527=Database Pages Read Sync/sec is the rate that pages are synchronously read from the database file(s) into the database cache.  [Dev Only]
2528=Database Pages Written/sec
2529=Database Pages Written/sec is the rate that pages are written to the database file (s) from the database cache.  [Dev Only]
2530=Database Pages Transferred/sec
2531=Database Pages Transferred/sec is the rate that pages are transferred from the database file(s) to the database cache and vice versa.  [Dev Only]
2532=Database Page Latches/sec
2533=Database Page Latches/sec is the rate that database pages are latched for access to their data.  [Dev Only]
2534=Database Page Fast Latches/sec
2535=Database Page Fast Latches/sec is the rate that database pages are latched for access to their data using a hint to tell the cache manager where that page might be in memory.  [Dev Only]
2536=Database Page Bad Latch Hints/sec
2537=Database Page Bad Latch Hints/sec is the rate that incorrect hints to the location of a given page in the cache are given to the cache manager.  These hints are used to perform fast latches.  [Dev Only]
2538=Database Cache % Fast Latch
2539=Database Cache % Fast Latch is the percentage of database pages latched for access to their data using a hint to tell the cache manager where that page might be in memory.  Ideally, this percentage should match Database Cache % Hit.  [Dev Only]
2540=No name
2541=No text
2542=Database Page Latch Conflicts/sec
2543=Database Page Latch Conflicts/sec is the rate that users latching a database page for access to its data fail due to a conflicting latch owned on that same page by another user.  [Dev Only]
2544=Database Page Latch Stalls/sec
2545=Database Page Latch Stalls/sec is the rate that users latching a database page for access to its data must wait for another user to release a latch on that same page.  [Dev Only]
2546=Database Cache % Available
2547=Database Cache % Available is the percentage of the database cache that can be allocated to cache database pages that are newly created or read in from the database file(s).  [Dev Only]
2548=No name
2549=No text
2550=Database Page Faults/sec
2551=Database Page Faults/sec is the rate that database file page requests require the database cache manager to allocate a new page from the database cache.
2552=Database Page Evictions/sec
2553=Database Page Evictions/sec is the rate that database file page requests that require the database cache manager to allocate a new page from the database cache force another database page out of the cache.  The eviction count is charged when the page is allocated and not when the previous owner of that page was actually evicted from the cache.  If this rate is too high, the database cache size may be too small.
2554=Database Page Fault Stalls/sec
2555=Database Page Fault Stalls/sec is the rate of page faults that cannot be serviced because there are no pages available for allocation from the database cache.  If this counter is non-zero most of the time, the clean threshold may be too low.
2556=Database Cache Size (MB)
2557=Database Cache Size (MB) is the amount of system memory (in MegaBytes) used by the database cache manager to hold commonly used information from the database file(s) to prevent file operations.  If the database cache size seems to be too small for optimal performance and there is very little available memory on the system (see Memory/Available Bytes), adding more memory to the system may increase performance.  If there is a lot of available memory on the system and the database cache size is not growing beyond a certain point, the database cache size may be capped at an artificially low limit.  Increasing this limit may increase performance.
2558=Database Cache Size
2559=Database Cache Size is the amount of system memory used by the database cache manager to hold commonly used information from the database file(s) to prevent file operations.  If the database cache size seems to be too small for optimal performance and there is very little available memory on the system (see Memory/Available Bytes), adding more memory to the system may increase performance.  If there is a lot of available memory on the system and the database cache size is not growing beyond a certain point, the database cache size may be capped at an artificially low limit.  Increasing this limit may increase performance.
2560=Database Cache Size Min
2561=Database Cache Size Min is the minimum amount of system memory configured for use by the database cache manager to hold commonly used information from the database file(s) to prevent file operations.  [Dev Only]
2562=Database Cache Size Max
2563=Database Cache Size Max is the maximum amount of system memory configured for use by the database cache manager to hold commonly used information from the database file(s) to prevent file operations.  [Dev Only]
2564=Database Cache % Available Min
2565=Database Cache % Available Min is the minimum percentage of the database cache that is kept to be allocated to cache database pages that are newly created or read in from the database file(s).  If the percentage of available pages drops below this minimum, pages are thrown out of the database cache until the maximum percentage of available pages is reached.  This percentage should be set as low as possible without causing the actual percentage to drop to zero, causing cache fault stalls.  [Dev Only]
2566=No name
2567=No text
2568=Database Cache % Available Max
2569=Database Cache % Available Max is the maximum percentage of the database cache that is kept to be allocated to cache database pages that are newly created or read in from the database file(s).  This percentage should be set as low as possible but far enough above the minimum percentage so that efficient production of availible pages is possible.  [Dev Only]
2570=No name
2571=No text
2572=Database Pages Preread/sec
2573=Database Pages Preread/sec is the rate that pages are read in anticipation of future use from the database file(s) into the database cache.  [Dev Only]
2574=Database Cached Pages Preread/sec
2575=Database Cached Pages Preread/sec is the rate that pages are read in anticipation of future use from the database file(s) into the database cache that are already cached.  This is non-ideal behavior that represents a waste of processing time.  [Dev Only]
2576=Database Pages Preread Untouched/sec
2577=Database Pages Preread Untouched/sec is the rate that pages are read in anticipation of future use from the database file(s) into the database cache that were subsequently thrown out without being used. This is non-ideal behavior that represents a waste of I/O bandwidth and processing time .  [Dev Only]
2578=Database Pages Versioned / sec
2579=Database Pages Versioned / sec is the rate at which pages in the database cache are being copied into new pages in the cache for the purpose of being asynchronously written while the current version of that page in the database file is still being modified.  This feature is primarily used to avoid cycles, branches, or long chains of flush order dependencies without requiring the pages involved to be synchronously written to disk.  [Dev Only]
2580=Database Cache % Versioned
2581=Database Cache % Versioned is the percentage of the database cache that contains older versions of currently cached pages that have not yet been written to disk and thrown out of the cache.  [Dev Only]
2582=No name
2583=No text
2584=Database Pages Ordinarily Written/sec
2585=Database Pages Ordinarily Written/sec is the rate that pages are written to the database file (s) from the database cache in preparation for evicting them from the cache to make room for other data.  [Dev Only]
2586=Database Pages Anomalously Written/sec
2587=Database Pages Anomalously Written/sec is the rate that pages are written to the database file (s) from the database cache before they would ordinarily be written.  [Dev Only]
2588=Database Pages Opportunely Written/sec
2589=Database Pages Opportunely Written/sec is the rate that pages are written to the database file (s) from the database cache because they happen to be near other pages that must be written.  These additional writes are performed before they must happen in the hope that the total number of seeks required to write all the pages is reduced.  [Dev Only]
2590=Database Pages Repeatedly Written/sec
2591=Database Pages Repeatedly Written/sec is the rate that pages are written to the database file (s) from the database cache more than once in their lifetime in the cache.  These page writes represent extra writes above the theoretical minimum and can therefore be considered overhead.  [Dev Only]
2592=Database Pages Idly Written/sec
2593=Database Pages Idly Written/sec is the rate that pages are written to the database file (s) from the database cache because there is low disk activity.  [Dev Only]
2594=Database Pages Coalesced Written/sec
2595=Database Pages Coalesced Written/sec is the rate that pages are written to the database file (s) from the database cache coalesced with another page. [Dev Only]
2596=Database Pages Coalesced Read/sec
2597=Database Pages Coalesced Read/sec is the rate that pages are read from the database file (s) to the database cache coalesced with another page. [Dev Only]
2598=Database Page History Records
2599=Database Page History Records is the current number of database page access history records retained for supporting the LRU-K page replacment algorithm.  [Dev Only]
2600=Database Page History % Hit
2601=Database Page History % Hit is the percentage of database page access history record lookups that were successful.  [Dev Only]
2602=No name
2603=No text
2604=Database Page Scans/sec
2605=Database Page Scans/sec is the rate at which database pages are considered for eviction from the database page cache.  [Dev Only]
2606=Database Page Scans Out-of-order/sec
2607=Database Page Scans Out-of-order/sec is the rate at which database pages are considered for eviction from the database page cache in a priority counter to the page replacement algorithm.  [Dev Only]
2608=No name
2609=No text
2610=Streaming Backup Pages Read/sec
2611=Streaming Backup Pages Read/sec is the rate of database read operations performed for the purpose of streaming backups.  [Dev Only]
2612=Online Defrag Pages Referenced/sec
2613=Online Defrag Pages Referenced/sec is the rate at which online defragmentation is touching database pages.  [Dev Only]
2614=Online Defrag Pages Read/sec
2615=Online Defrag Pages Read/sec is the rate of database read operations being performed by online defragmentation. [Dev Only]
2616=Online Defrag Pages Preread/sec
2617=Online Defrag Pages Preread/sec is the rate at which database pages are read in anticipation of future use by online defragmentation.  [Dev Only]
2618=Online Defrag Pages Dirtied/sec
2619=Online Defrag Pages Dirtied/sec is the rate at which online defragmentation is modifying clean database pages. [Dev Only]
2620=Online Defrag Pages Re-Dirtied/sec
2621=Online Defrag Pages Re-Dirtied/sec is the rate at which online defragmentation is modifying database pages that already contained modifications.  [Dev Only]
2622=Online Defrag Log Records/sec
2623=Online Defrag Log Records/sec is the rate at which online defragmentation is generating log records.  [Dev Only]
2624=Online Defrag Average Log Bytes
2625=Online Defrag Average Log Bytes is the average size of the log records being generated by online defragmentation.  [Dev only]
2626=No name
2627=No text
2628=Database Tasks Pages Referenced/sec
2629=Database Tasks Pages Referenced/sec is the rate at which background database tasks are touching database pages. [Dev Only]
2630=Database Tasks Pages Read/sec
2631=Database Tasks Pages Read/sec is the rate of database read operations being performed by background database tasks. [Dev Only]
2632=Database Tasks Pages Preread/sec
2633=Database Tasks Pages Preread/sec is the rate at which database pages are read in anticipation of future use by background database tasks.  [Dev Only]
2634=Database Tasks Pages Dirtied/sec
2635=Database Tasks Pages Dirtied/sec is the rate at which background database tasks are modifying clean database pages. [Dev Only]
2636=Database Tasks Pages Re-Dirtied/sec
2637=Database Tasks Pages Re-Dirtied/sec is the rate at which background databases tasks are modifying database pages that already contained modifications.  [Dev Only]
2638=Database Tasks Log Records/sec
2639=Database Tasks Log Records/sec is the rate at which background database tasks are generating log records.  [Dev Only]
2640=Database Tasks Average Log Bytes
2641=Database Tasks Average Log Bytes is the average size of the log records being generated by background database tasks.  [Dev only]
2642=No name
2643=No text
2644=I/O Database Reads/sec
2645=I/O Database Reads/sec is the rate of database read operations completed.
2646=I/O Database Reads Average Latency
2647=I/O Database Reads Average Latency is the average length of time,  in milliseconds, per database read operation.
2648=No name
2649=No text
2650=I/O Database Reads Average Bytes
2651=I/O Database Reads Average Bytes is the average number of bytes transferred per database read operation.  [Dev Only]
2652=No name
2653=No text
2654=I/O Database Reads In Heap
2655=I/O Database Reads In Heap is the number of database read operations queued in the database engine's I/O heap and waiting to be issued.  [Dev Only]
2656=I/O Database Reads Async Pending
2657=I/O Database Reads Async Pending is the number of database read operations asynchronously pending completion.  [Dev Only]
2658=I/O Database Reads Abnormal Latency/sec
2659=I/O Database Reads Abnormal Latency/sec is the rate of database read operations that take an abnormally long length of time (default is 1 minute) to be serviced by the OS.  [Dev Only]
2660=I/O Log Reads/sec
2661=I/O Log Reads/sec is the rate of logfile read operations completed.
2662=I/O Log Reads Average Latency
2663=I/O Log Reads Average Latency is the average length of time, in milliseconds, per logfile read operation.  [Dev Only]
2664=No name
2665=No text
2666=I/O Log Reads Average Bytes
2667=I/O Log Reads Average Bytes is the average number of bytes transferred per logfile read operation.  [Dev Only]
2668=No name
2669=No text
2670=I/O Log Reads In Heap
2671=I/O Log Reads In Heap is the number of logfile read operations queued in the database engine's I/O heap and waiting to be issued.  [Dev Only]
2672=I/O Log Reads Async Pending
2673=I/O Log Reads Async Pending is the number of logfile read operations asynchronously pending completion.  [Dev Only]
2674=I/O Log Reads Abnormal Latency/sec
2675=I/O Log Reads Abnormal Latency/sec is the rate of logfile read operations that take an abnormally long length of time (default is 1 minute) to be serviced by the OS.  [Dev Only]
2676=I/O Database Writes/sec
2677=I/O Database Writes/sec is the rate of database write operations completed.
2678=I/O Database Writes Average Latency
2679=I/O Database Writes Average Latency is the average length of time,  in milliseconds, per database write operation.
2680=No name
2681=No text
2682=I/O Database Writes Average Bytes
2683=I/O Database Writes Average Bytes is the average number of bytes transferred per database write operation.  [Dev Only]
2684=No name
2685=No text
2686=I/O Database Writes In Heap
2687=I/O Database Writes In Heap is the number of database write operations queued in the database engine's I/O heap and waiting to be issued.  [Dev Only]
2688=I/O Database Writes Async Pending
2689=I/O Database Writes Async Pending is the number of database write operations asynchronously pending completion.  [Dev Only]
2690=I/O Database Writes Abnormal Latency/sec
2691=I/O Database Writes Abnormal Latency/sec is the rate of database write operations that take an abnormally long length of time (default is 1 minute) to be serviced by the OS.  [Dev Only]
2692=I/O Log Writes/sec
2693=I/O Log Writes/sec is the rate of logfile write operations completed.
2694=I/O Log Writes Average Latency
2695=I/O Log Writes Average Latency is the average length of time, in milliseconds, per logfile write operation.
2696=No name
2697=No text
2698=I/O Log Writes Average Bytes
2699=I/O Log Writes Average Bytes is the average number of bytes transferred per logfile write operation.  [Dev Only]
2700=No name
2701=No text
2702=I/O Log Writes In Heap
2703=I/O Log Writes In Heap is the number of logfile write operations queued in the database engine's I/O heap and waiting to be issued.  [Dev Only]
2704=I/O Log Writes Async Pending
2705=I/O Log Writes Async Pending is the number of logfile write operations asynchronously pending completion.  [Dev Only]
2706=I/O Log Writes Abnormal Latency/sec
2707=I/O Log Writes Abnormal Latency/sec is the rate of logfile write operations that take an abnormally long length of time (default is 1 minute) to be serviced by the OS.  [Dev Only]
2708=SLV File Table Inserts/sec
2709=SLV File Table Inserts/sec is the rate at which entries are inserted into an SLV File Table in the system.  [Dev Only]
2710=SLV File Table Cleans/sec
2711=SLV File Table Cleans/sec is the rate at which attempta are made to delete an entry from an SLV File Table in the system.  [Dev Only]
2712=SLV File Table Deletes/sec
2713=SLV File Table Deletes/sec is the rate at which entries are deleted from an SLV File Table in the system.  [Dev Only]
2714=SLV File Table Entries
2715=SLV File Table Entries is the total number of entries contained in all SLV File Tables in the system.  [Dev Only]
2716=Threads Blocked/sec
2717=Threads Blocked/sec is the rate at which the execution of threads are suspended to wait for a specific event to occur or for the acquisition of a resource currently owned by another thread. [Dev Only]
2718=Threads Blocked
2719=Threads Blocked is the current number of threads whose execution has been suspended to wait for a specific event to occur or for the acquisition of a resource currently owned by another thread. [Dev Only]
2720=Database ==> TableClasses
2721=Statistics for the ESE high performance embedded database management system by Table Class
2722=Record Inserts/sec
2723=Record Inserts/sec is the rate at which records are being inserted into database tables.  [Dev Only]
2724=Record Deletes/sec
2725=Record Deletes/sec is the rate at which records in database tables are being flagged for deletion.  [Dev Only]
2726=Record Replaces/sec
2727=Record Deletes/sec is the rate at which records in database tables are being updated.  [Dev Only]
2728=Record Unnecessary Replaces/sec
2729=Record Unnecessary Replaces/sec is the rate at which updates to records in database tables are being discarded because the update did not actually modify the contents of the record.  [Dev Only]
2730=Record Redundant Replaces/sec
2731=Record Redundant Replaces/sec is the rate at which records in database tables are being updated with the exact same content of the original record.  [Dev Only]
2732=Record Escrow-Updates/sec
2733=Record Escrow-Updates/sec is the rate at which records in database tables are being escrow-updated.  [Dev Only]
2734=Secondary Index Inserts/sec
2735=Secondary Index Inserts/sec is the rate at which entries are being inserted into indexes of database tables.  [Dev Only]
2736=Secondary Index Deletes/sec
2737=Secondary Index Deletes/sec is the rate at which entries in indexes of database tables are being flagged for deletion.  [Dev Only]
2738=False Index Column Updates/sec
2739=False Index Column Updates/sec is the number of times per second an attempt was made to update an index because an update to at least one of the indexed columns was detected, only to discover that none of the indexed columns had actually changed (and therefore no index update was actually required).  [Dev Only]
2740=False Tuple Index Column Updates/sec
2741=False Tuple Index Column Updates/sec is the number of times per second an attempt was made to update a tuple index because an update to the tuple-indexed column was detected, only to discover that the column had not actually changed (and therefore no index update was actually required).  [Dev Only]
2742=Record Intrinsic Long-Values Updated/sec
2743=Record Intrinsic Long-Values Updated/sec is the rate at which intrinsic long-values are added to or replaced in records of database tables.  [Dev Only]
2744=Record Separated Long-Values Added/sec
2745=Record Separated Long-Values Added/sec is the rate at which separated long-values are normally added to records of database tables.  [Dev Only]
2746=Record Separated Long-Values Forced/sec
2747=Record Separated Long-Values Forced/sec is the rate at which separated long-values are added to records of a database table because they could not be accommodated in the record itself.  [Dev Only]
2748=Record Separated Long-Values All Forced/sec
2749=Record Separated Long-Values All Forced/sec is the rate at which all intrinsic long-values are separated out of a record of a database table in order to accommodate updates to the record.  [Dev Only]
2750=Record Separated Long-Values Reference All/sec
2751=Record Separated Long-Values Reference All/sec is the rate at which a reference is added for all the separated long-values associated with a record of a database table.  [Dev Only]
2752=Record Separated Long-Values Dereference All/sec
2753=Record Separated Long-Values Dereference All/sec is the rate at which a reference is removed for all the separated long-values associated with a record of a database table.  [Dev Only]
2754=Separated Long-Value Seeks/sec
2755=Separated Long-Value Seeks/sec is the rate at which seeks for a separated long-value in a database table are performed.  [Dev Only]
2756=Separated Long-Value Retrieves/sec
2757=Separated Long-Value Retrieves/sec is the rate at which retrievals of a separated long-value in a database table are performed.  [Dev Only]
2758=Separated Long-Value Creates/sec
2759=Separated Long-Value Creates/sec is the rate at which new separated long-values are added to a database table.  [Dev Only]
2760=Separated Long-Value Updates/sec
2761=Separated Long-Value Updates/sec is the rate at which existing separated long-values in a database table are modified.  [Dev Only]
2762=Separated Long-Value Deletes/sec
2763=Separated Long-Value Deletes/sec is the rate at which separated long-values in a database table are flagged for deletion.  [Dev Only]
2764=Separated Long-Value Copies/sec
2765=Separated Long-Value Copies/sec is the rate at which existing separated long-values in a database table are copied.  [Dev Only]
2766=Separated Long-Value Chunk Seeks/sec
2767=Separated Long-Value Chunk Seeks/sec is the rate at which seeks for a particular chunk of a separated long-value in a database table are performed.  [Dev Only]
2768=Separated Long-Value Chunk Retrieves/sec
2769=Separated Long-Value Chunk Retrieves/sec is the rate at which retrievals of a chunk of a separated long-value in a database table are performed.  [Dev Only]
2770=Separated Long-Value Chunk Appends/sec
2771=Separated Long-Value Chunk Appends/sec is the rate at which chunks are appended to separated long-values of database tables.  [Dev Only]
2772=Separated Long-Value Chunk Replaces/sec
2773=Separated Long-Value Chunk Replaces/sec is the rate at which existing separated long-value chunks in a database table are replaced.  [Dev Only]
2774=Separated Long-Value Chunk Deletes/sec
2775=Separated Long-Value Chunk Deletes/sec is the rate at which separated long-value chunks in a database table are flagged for deletion.  [Dev Only]
2776=Separated Long-Value Chunk Copies/sec
2777=Separated Long-Value Chunk Copies/sec is the rate at which existing separated long-value chunks in a database table are copied.  [Dev Only]
2778=B+ Tree Append Splits/sec
2779=B+ Tree Append Splits/sec is the count of times a page is appended to a database B+ Tree per second.  [Dev Only]
2780=B+ Tree Right Splits/sec
2781=B+ Tree Right Splits/sec is the count of times a page is split right in a database B+ Tree per second.  [Dev Only]
2782=B+ Tree Right Hotpoint Splits/sec
2783=B+ Tree Right Hotpoint Splits/sec is the count of times a page is split right in a database B+ Tree, but which is treated as an append at a local "hotpoint" in the B+ Tree per second.  [Dev Only]
2784=B+ Tree Vertical Splits/sec
2785=B+ Tree Vertical Splits/sec is the count of times a page is split vertically in a database B+ Tree per second.  [Dev Only]
2786=B+ Tree Splits/sec
2787=B+ Tree Splits/sec is the count of times a page is appended to or split in a database B+ Tree per second.  [Dev Only]
2788=B+ Tree Empty Page Merges/sec
2789=B+ Tree Empty Page Merges/sec is the count of empty pages removed from a database B+ Tree per second.  [Dev Only]
2790=B+ Tree Right Merges/sec
2791=Right Merges/sec is the count of pages removed from a database B+ Tree per second by moving all its records to the next page to the right.  [Dev Only]
2792=B+ Tree Partial Merges/sec
2793=B+ Tree Partial Merges/sec is the count of pages where some of its records are moved to a page on the right in a database B+ Tree per second.  [Dev Only]
2794=B+ Tree Merges/sec
2795=B+ Tree Merges/sec is the count of pages merged in a database B+ Tree per second.  [Dev Only]
2796=B+ Tree Failed Simple Page Cleanup Attempts/sec
2797=B+ Tree Failed Simple Page Cleanup Attempts/sec is the rate that attempts to reclaim deleted node space on a page are unsuccessful due to a conflict when attempting to write-latch the page. The cleanup is re-tried by locking the root of the B+ Tree.  [Dev Only]
2798=B+ Tree Seek Short Circuits/sec
2799=B+ Tree Seek Short Circuits/sec is the count of repeated seeks to the same record in a database B+ Tree that are saved by jumping directly to the cached physical location of that record per second.  [Dev Only]
2800=B+ Tree Unnecessary Sibling Latches/sec
2801=B+ Tree Unnecessary Sibling Latches/sec is the count of sibling pages latched during a database B+ Tree Delete in the hopes of performing a merge where a merge is not possible, making that latch unnecessary.  [Dev Only]
2802=B+ Tree Move Nexts/sec
2803=B+ Tree Move Nexts/sec is the count of times the database engine moves to the next record in a B+ Tree per second.  [Dev Only]
2804=B+ Tree Move Nexts (Non-Visible Nodes Skipped)/sec
2805=B+ Tree Move Nexts (Non-Visible Nodes Skipped)/sec is the count of times the database engine skips non-visible records while attempting to move to the next visible record in a B+ Tree per second.  [Dev Only]
2806=B+ Tree Move Prevs/sec
2807=B+ Tree Move Prevs/sec is the count of times the database engine moves to the previous record in a B+ Tree per second.  [Dev Only]
2808=B+ Tree Move Prevs (Non-Visible Nodes Skipped)/sec
2809=B+ Tree Move Prevs (Non-Visible Nodes Skipped)/sec is the count of times the database engine skips non-visible records while attempting to move to the previous visible record in a B+ Tree per second.  [Dev Only]
2810=B+ Tree Seeks/sec
2811=B+ Tree Seeks/sec is the count of times a record is seeked to by a key in a database B+ Tree per second.  [Dev Only]
2812=B+ Tree Inserts/sec
2813=B+ Tree Inserts/sec is the count of times a record is inserted in a database B+ Tree per second.  [Dev Only]
2814=B+ Tree Replaces/sec
2815=B+ Tree Replaces/sec is the count of times a record is replaced in a database B+ Tree per second.  [Dev Only]
2816=B+ Tree Flag Deletes/sec
2817=B+ Tree Flag Deletes/sec is the count of times a record is flag deleted in a database B+ Tree per second.  [Dev Only]
2818=B+ Tree Deletes/sec
2819=B+ Tree Deletes/sec is the count of times a record is deleted in a database B+ Tree per second.  [Dev Only]
2820=B+ Tree Appends/sec
2821=B+ Tree Appends/sec is the count of times a record is appended to a database B+ Tree per second.  [Dev Only]
2822=B+ Tree Creates/sec
2823=B+ Tree Creates/sec is the number of B+ Trees and their corresponding space trees (if any) created per second.  This can also be viewed as the number of FDP creates per second.  [Dev Only]
2824=B+ Tree Creates (Total)
2825=B+ Tree Creates (Total) is the total number of B+ Trees and their corresponding space trees (if any) created.  This can also be viewed as the total number of FDP creates.  [Dev Only]
2826=B+ Tree Destroys/sec
2827=B+ Tree Destroys/sec is the number of B+ Trees and their corresponding space trees (if any) destroyed per second.  This can also be viewed as the number of FDP destroys per second.  [Dev Only]
2828=B+ Tree Destroys (Total)
2829=B+ Tree Destroys (Total) is the total number of B+ Trees and their corresponding space trees (if any) destroyed.  This can also be viewed as the total number of FDP destroys.  [Dev Only]
2830=Database Cache Size (MB)
2831=Database Cache Size (MB) is the amount of system memory (in MegaBytes) used by the database cache manager to hold commonly used information from the database file(s) to prevent file operations.  If the database cache size seems to be too small for optimal performance and there is very little available memory on the system (see Memory/Available Bytes), adding more memory to the system may increase performance.  If there is a lot of available memory on the system and the database cache size is not growing beyond a certain point, the database cache size may be capped at an artificially low limit.  Increasing this limit may increase performance.
2832=Database Pages Read Async/sec
2833=Database Pages Read Async/sec is the rate that pages are asynchronously read from the database file(s) into the database cache.  [Dev Only]
2834=Database Pages Read Sync/sec
2835=Database Pages Read Sync/sec is the rate that pages are synchronously read from the database file(s) into the database cache.  [Dev Only]
2836=Database Pages Written/sec
2837=Database Pages Written/sec is the rate that pages are written to the database file (s) from the database cache.  [Dev Only]
2838=Database Pages Transferred/sec
2839=Database Pages Transferred/sec is the rate that pages are transferred from the database file(s) to the database cache and vice versa.  [Dev Only]
2840=Database Pages Preread/sec
2841=Database Pages Preread/sec is the rate that pages are read in anticipation of future use from the database file(s) into the database cache.  [Dev Only]
2842=Database Cached Pages Preread/sec
2843=Database Cached Pages Preread/sec is the rate that pages are read in anticipation of future use from the database file(s) into the database cache that are already cached.  This is non-ideal behavior that represents a waste of processing time.  [Dev Only]
2844=Database Pages Preread Untouched/sec
2845=Database Pages Preread Untouched/sec is the rate that pages are read in anticipation of future use from the database file(s) into the database cache that were subsequently thrown out without being used. This is non-ideal behavior that represents a waste of I/O bandwidth and processing time .  [Dev Only]
2846=Database Pages Versioned / sec
2847=Database Pages Versioned / sec is the rate at which pages in the database cache are being copied into new pages in the cache for the purpose of being asynchronously written while the current version of that page in the database file is still being modified.  This feature is primarily used to avoid cycles, branches, or long chains of flush order dependencies without requiring the pages involved to be synchronously written to disk.  [Dev Only]
2848=Database Pages Ordinarily Written/sec
2849=Database Pages Ordinarily Written/sec is the rate that pages are written to the database file (s) from the database cache in preparation for evicting them from the cache to make room for other data.  [Dev Only]
2850=Database Pages Anomalously Written/sec
2851=Database Pages Anomalously Written/sec is the rate that pages are written to the database file (s) from the database cache before they would ordinarily be written.  [Dev Only]
2852=Database Pages Opportunely Written/sec
2853=Database Pages Opportunely Written/sec is the rate that pages are written to the database file (s) from the database cache because they happen to be near other pages that must be written.  These additional writes are performed before they must happen in the hope that the total number of seeks required to write all the pages is reduced.  [Dev Only]
2854=Database Pages Repeatedly Written/sec
2855=Database Pages Repeatedly Written/sec is the rate that pages are written to the database file (s) from the database cache more than once in their lifetime in the cache.  These page writes represent extra writes above the theoretical minimum and can therefore be considered overhead.  [Dev Only]
2856=Database Pages Idly Written/sec
2857=Database Pages Idly Written/sec is the rate that pages are written to the database file (s) from the database cache because there is low disk activity.  [Dev Only]
2858=Database Pages Coalesced Written/sec
2859=Database Pages Coalesced Written/sec is the rate that pages are written to the database file (s) from the database cache coalesced with another page. [Dev Only]
2860=Database Pages Coalesced Read/sec
2861=Database Pages Coalesced Read/sec is the rate that pages are read from the database file (s) to the database cache coalesced with another page. [Dev Only]
2862=Database ==> Instances
2863=Instances in this process
2864=Pages Converted/sec
2865=Pages Converted/sec is the count of times per second a database page is converted from an older database format
2866=Pages Converted
2867=Pages Converted is the count of database pages that have been converted from an older format
2868=Records Converted/sec
2869=Records Converted/sec is the count of times per second a database record is converted from an older database format
2870=Records Converted
2871=Records Converted is the count of database records that have been converted from an older format
2872=FCB Asynchronous Scan/sec
2873=FCB Asynchronous Scan/sec is the number of cached schema records (FCBs) scanned during asynchronous schema record cleanup. These records are scanned to age out older schema definitions. [Dev Only]
2874=FCB Asynchronous Purge/sec
2875=FCB Asynchronous Purge/sec is the number of cached schema records (FCBs) purged during asynchronous schema record cleanup. These records are purged to age out older schema definitions. [Dev Only]
2876=FCB Asynchronous Threshold-Scan/sec
2877=FCB Asynchronous Threshold-Scan/sec is the number of cached schema records (FCBs) scanned during asynchronous schema record cleanup.  Cleanup was triggered by a large number of schema records above the preferred limit.  These records are aggressively scanned to age out older schema definitions.  [Dev Only]
2878=FCB Asynchronous Threshold-Purge/sec
2879=FCB Asynchronous Threshold-Purge/sec is the number of cached schema records (FCBs) purged during asynchronous schema record cleanup.  Cleanup was triggered by a large number of schema records above the preferred limit.  These records are aggressively purged to age out older schema definitions.  [Dev Only]
2880=FCB Asynchronous Purge Conflicts/sec
2881=FCB Asynchronous Purge Conflicts/sec is the number of failed purge attempts on cached schema records (FCBs) during asynchronous schema record cleanup.  The purge operation failed because exclusive ownership of the schema record could not be obtained.  [Dev Only]
2882=FCB Synchronous Purge/sec
2883=FCB Synchronous Purge/sec is the number of cached schema records (FCBs) being synchronously purged each second.  [Dev Only]
2884=FCB Synchronous Purge Stalls/sec
2885=FCB Synchronous Purge Stalls/sec is the number of stalls encountered while waiting for exclusive ownership of cached schema records (FCBs) in order to synchronously purge them.  [Dev Only]
2886=FCB Allocations Wait For Version Cleanup/sec
2887=FCB Allocations Wait For Version Cleanup/sec is the number of FCB allocations that must first wait for version cleanup in an attempt to free used FCBs for re-use. [Dev Only]
2888=FCB Purge On Cursor Close/sec
2889=FCB Purge On Cursor Close/sec is the number of cached schema records (FCBs) being synchronously purged when the cursor is closed (instead of leaving the schema record cached) each second.  [Dev Only]
2890=FCB Cache % Hit
2891=FCB Cache % Hit is the percentage of schema records (FCBs) opened directly from the schema record cache.  No file operations were required.  [Dev Only]
2892=No name
2893=No text
2894=FCB Cache Stalls/sec
2895=FCB Cache Stalls/sec is the number of stalls encountered while waiting for exclusive ownership of cached schema records (FCBs) in order to update their reference count.  [Dev Only]
2896=FCB Cache Maximum
2897=FCB Cache Maximum is the absolute maximum number of the schema records (FCBs) that can exist in the cache.  [Dev Only]
2898=FCB Cache Preferred
2899=FCB Cache Preferred is the preferred maximum number of the schema records (FCBs) that should exist in the cache.  [Dev Only]
2900=FCB Cache Allocated
2901=FCB Cache Allocated is the number of cached schema records (FCBs) currently allocated and in use.  [Dev Only]
2902=FCB Cache Available
2903=FCB Cache Available is the number of cached schema records (FCBs) currently allocated but not in use.  These records will be used and/or purged as required.  [Dev Only]
2904=Sessions In Use
2905=Sessions In Use is the number of database sessions currently open for use by client threads.  [Dev Only]
2906=Sessions % Used
2907=Sessions % Used is the percentage of database sessions currently open for use by client threads.  [Dev Only]
2908=No name
2909=No text
2910=Table Open Cache % Hit
2911=Table Open Cache % Hit is the percentage of database tables opened using cached schema information.  If this percentage is too low, the table cache size may be too small.
2912=No name
2913=No text
2914=Table Open Cache Hits/sec
2915=Table Open Cache Hits/sec is the number of database tables opened using cached schema information per second.  If this rate is too low, the table cache size may be too small.
2916=Table Open Cache Misses/sec
2917=Table Open Cache Misses/sec is the number of database tables opened without using cached schema information per second.  If this rate is too high, the table cache size may be too small.
2918=Table Opens/sec
2919=Table Opens/sec is the number of database tables opened per second.
2920=Log Bytes Write/sec
2921=Log Bytes Write per second is the rate bytes are written to the log.
2922=Log Buffer Size
2923=Log Buffer Size is the amount of memory, in bytes, allocated for the database log buffers.  [Dev Only]
2924=Log Buffer Bytes Used
2925=Log Buffer Bytes Used is the amount of bytes in the log buffers that have not yet been flushed to the logs.  [Dev only]
2926=Log Buffer Bytes Free
2927=Log Buffer Bytes Free is the amount of free space available in the log buffers.  [Dev only]
2928=Log Threads Waiting
2929=Log Threads Waiting is the number of threads waiting for their data to be written to the log in order to complete an update of the database.  If this number is too high, the log may be a bottleneck.
2930=Log File Size
2931=Log File Size is the size, in bytes, of the database log files.  [Dev Only]
2932=Log Checkpoint Depth
2933=Log Checkpoint Depth represents the amount of work, in bytes, that will need to be redone or undone to the database file(s) if the process crashes.  [Dev Only]
2934=Log Generation Checkpoint Depth
2935=Log Generation Checkpoint Depth represents the amount of work, in count of log files, that will need to be redone or undone to the database file(s) if the process crashes.
2936=User Read Only Transaction Commits to Level 0/sec
2937=User Read Only Transaction Commits to Level 0/sec is the count of fully committed transactions started by the calling process that do not modify any data stored in the database engine.  [Dev Only]
2938=User Read/Write Transaction Commits to Level 0/sec
2939=User Read/Write Transaction Commits to Level 0/sec is the count of fully committed transactions started by the calling process that modify data stored in the database engine.  [Dev Only]
2940=User Transaction Commits to Level 0/sec
2941=User Transaction Commits to Level 0/sec is the count of fully committed transactions started by the calling process that access data stored in the database engine.  [Dev Only]
2942=User Read Only Transaction Rollbacks to Level 0/sec
2943=User Read Only Transaction Rollbacks to Level 0/sec is the count of aborted transactions started by the calling process that do not modify any data stored in the database engine.  [Dev Only]
2944=User Read/Write Transaction Rollbacks to Level 0/sec
2945=User Read/Write Transaction Rollbacks to Level 0/sec is the count of aborted transactions started by the calling process that modify data stored in the database engine.  [Dev Only]
2946=User Transaction Rollbacks to Level 0/sec
2947=User Transaction Rollbacks to Level 0/sec is the count of aborted transactions started by the calling process that access data stored in the database engine.  [Dev Only]
2948=System Read Only Transaction Commits to Level 0/sec
2949=System Read Only Transaction Commits to Level 0/sec is the count of fully committed transactions started internally that do not modify any data stored in the database engine.  [Dev Only]
2950=System Read/Write Transaction Commits to Level 0/sec
2951=System Read/Write Transaction Commits to Level 0/sec is the count of fully committed transactions started internally that modify data stored in the database engine.  [Dev Only]
2952=System Transaction Commits to Level 0/sec
2953=System Transaction Commits to Level 0/sec is the count of fully committed transactions started internally that access data stored in the database engine.  [Dev Only]
2954=System Read Only Transaction Rollbacks to Level 0/sec
2955=System Read Only Transaction Rollbacks to Level 0/sec is the count of aborted transactions started internally that do not modify any data stored in the database engine.  [Dev Only]
2956=System Read/Write Transaction Rollbacks to Level 0/sec
2957=System Read/Write Transaction Rollbacks to Level 0/sec is the count of aborted transactions started internally that modify data stored in the database engine.  [Dev Only]
2958=System Transaction Rollbacks to Level 0/sec
2959=System Transaction Rollbacks to Level 0/sec is the count of aborted transactions started internally that access data stored in the database engine.  [Dev Only]
2960=Database Page Allocation File Extension Async Consumed/sec
2961=Database Page Allocation File Extension Async Consumed/sec is the rate of page allocations from a database file that must be serviced by extending the database file, but which do not stall when doing doing so.  [Dev Only]
2962=Database Page Allocation File Extension Stalls/sec
2963=Database Page Allocation File Extension Stalls/sec is the rate of page allocations from a database file that must be serviced by extending the database file and which stall when doing so.  [Dev Only]
2964=Log Records/sec
2965=Log Records/sec is the count of records written to the database log buffers per second.  [Dev Only]
2966=Log Buffer Capacity Flushes/sec
2967=Log Buffer Capacity Flushes/sec is the count of times the database log buffers must be flushed per second because they are full.  [Dev Only]
2968=Log Buffer Commit Flushes/sec
2969=Log Buffer Commit Flushes/sec is the count of times the database log buffers must be flushed per second because a transaction is fully committing its changes.  [Dev Only]
2970=Log Buffer Flushes/sec
2971=Log Buffer Flushes/sec is the count of times the database log buffers must be flushed per second.
2972=Log Writes/sec
2973=Log Writes/sec is the number of times the log buffers are written to the log file(s) per second.  If this number approaches the maximum write rate for the media holding the log file(s), the log may be a bottleneck.
2974=Log Record Stalls/sec
2975=Log Record Stalls/sec is the number of log records that cannot be added to the log buffers per second because they are full.  If this counter is non-zero most of the time, the log buffer size may be a bottleneck.
2976=Version buckets allocated
2977=Total number of version buckets allocated
2978=Version buckets allocated for deletes
2979=Total number of version buckets allocated for FlagDelete RCEs  [Dev Only]
2980=VER Bucket Allocations Wait For Version Cleanup/sec
2981=VER Bucket Allocations Wait For Version Cleanup/sec is the number of version bucket allocations that must first wait for version cleanup in an attempt to free used version buckets  for re-use. [Dev Only]
2982=Version store average RCE bookmark length
2983=Average length of bookmark in RCE  [Dev Only]
2984=Version store unnecessary calls/sec
2985=Number of times per second we look in the version store for a node whose version bit is set but which has no versions  [Dev Only]
2986=Version store cleanup tasks asynchronously dispatched/sec
2987=Number of times per second a version store clean task is dispatched asynchronously to be performed  [Dev Only]
2988=Version store cleanup tasks synchronously dispatched/sec
2989=Number of times per second a version store clean task is performed synchronously  [Dev Only]
2990=Version store cleanup tasks discarded/sec
2991=Number of times per second a version store clean task was discarded due to load concerns  [Dev Only]
2992=Version store cleanup tasks failures/sec
2993=Number of times per second a dispatched version store cleanup task fails  [Dev Only]
2994=Record Inserts/sec
2995=Record Inserts/sec is the rate at which records are being inserted into database tables.  [Dev Only]
2996=Record Deletes/sec
2997=Record Deletes/sec is the rate at which records in database tables are being flagged for deletion.  [Dev Only]
2998=Record Replaces/sec
2999=Record Deletes/sec is the rate at which records in database tables are being updated.  [Dev Only]
3000=Record Unnecessary Replaces/sec
3001=Record Unnecessary Replaces/sec is the rate at which updates to records in database tables are being discarded because the update did not actually modify the contents of the record.  [Dev Only]
3002=Record Redundant Replaces/sec
3003=Record Redundant Replaces/sec is the rate at which records in database tables are being updated with the exact same content of the original record.  [Dev Only]
3004=Record Escrow-Updates/sec
3005=Record Escrow-Updates/sec is the rate at which records in database tables are being escrow-updated.  [Dev Only]
3006=Secondary Index Inserts/sec
3007=Secondary Index Inserts/sec is the rate at which entries are being inserted into indexes of database tables.  [Dev Only]
3008=Secondary Index Deletes/sec
3009=Secondary Index Deletes/sec is the rate at which entries in indexes of database tables are being flagged for deletion.  [Dev Only]
3010=False Index Column Updates/sec
3011=False Index Column Updates/sec is the number of times per second an attempt was made to update an index because an update to at least one of the indexed columns was detected, only to discover that none of the indexed columns had actually changed (and therefore no index update was actually required).  [Dev Only]
3012=False Tuple Index Column Updates/sec
3013=False Tuple Index Column Updates/sec is the number of times per second an attempt was made to update a tuple index because an update to the tuple-indexed column was detected, only to discover that the column had not actually changed (and therefore no index update was actually required).  [Dev Only]
3014=Record Intrinsic Long-Values Updated/sec
3015=Record Intrinsic Long-Values Updated/sec is the rate at which intrinsic long-values are added to or replaced in records of database tables.  [Dev Only]
3016=Record Separated Long-Values Added/sec
3017=Record Separated Long-Values Added/sec is the rate at which separated long-values are normally added to records of database tables.  [Dev Only]
3018=Record Separated Long-Values Forced/sec
3019=Record Separated Long-Values Forced/sec is the rate at which separated long-values are added to records of a database table because they could not be accommodated in the record itself.  [Dev Only]
3020=Record Separated Long-Values All Forced/sec
3021=Record Separated Long-Values All Forced/sec is the rate at which all intrinsic long-values are separated out of a record of a database table in order to accommodate updates to the record.  [Dev Only]
3022=Record Separated Long-Values Reference All/sec
3023=Record Separated Long-Values Reference All/sec is the rate at which a reference is added for all the separated long-values associated with a record of a database table.  [Dev Only]
3024=Record Separated Long-Values Dereference All/sec
3025=Record Separated Long-Values Dereference All/sec is the rate at which a reference is removed for all the separated long-values associated with a record of a database table.  [Dev Only]
3026=Separated Long-Value Seeks/sec
3027=Separated Long-Value Seeks/sec is the rate at which seeks for a separated long-value in a database table are performed.  [Dev Only]
3028=Separated Long-Value Retrieves/sec
3029=Separated Long-Value Retrieves/sec is the rate at which retrievals of a separated long-value in a database table are performed.  [Dev Only]
3030=Separated Long-Value Creates/sec
3031=Separated Long-Value Creates/sec is the rate at which new separated long-values are added to a database table.  [Dev Only]
3032=Separated Long-Value Updates/sec
3033=Separated Long-Value Updates/sec is the rate at which existing separated long-values in a database table are modified.  [Dev Only]
3034=Separated Long-Value Deletes/sec
3035=Separated Long-Value Deletes/sec is the rate at which separated long-values in a database table are flagged for deletion.  [Dev Only]
3036=Separated Long-Value Copies/sec
3037=Separated Long-Value Copies/sec is the rate at which existing separated long-values in a database table are copied.  [Dev Only]
3038=Separated Long-Value Chunk Seeks/sec
3039=Separated Long-Value Chunk Seeks/sec is the rate at which seeks for a particular chunk of a separated long-value in a database table are performed.  [Dev Only]
3040=Separated Long-Value Chunk Retrieves/sec
3041=Separated Long-Value Chunk Retrieves/sec is the rate at which retrievals of a chunk of a separated long-value in a database table are performed.  [Dev Only]
3042=Separated Long-Value Chunk Appends/sec
3043=Separated Long-Value Chunk Appends/sec is the rate at which chunks are appended to separated long-values of database tables.  [Dev Only]
3044=Separated Long-Value Chunk Replaces/sec
3045=Separated Long-Value Chunk Replaces/sec is the rate at which existing separated long-value chunks in a database table are replaced.  [Dev Only]
3046=Separated Long-Value Chunk Deletes/sec
3047=Separated Long-Value Chunk Deletes/sec is the rate at which separated long-value chunks in a database table are flagged for deletion.  [Dev Only]
3048=Separated Long-Value Chunk Copies/sec
3049=Separated Long-Value Chunk Copies/sec is the rate at which existing separated long-value chunks in a database table are copied.  [Dev Only]
3050=B+ Tree Append Splits/sec
3051=B+ Tree Append Splits/sec is the count of times a page is appended to a database B+ Tree per second.  [Dev Only]
3052=B+ Tree Right Splits/sec
3053=B+ Tree Right Splits/sec is the count of times a page is split right in a database B+ Tree per second.  [Dev Only]
3054=B+ Tree Right Hotpoint Splits/sec
3055=B+ Tree Right Hotpoint Splits/sec is the count of times a page is split right in a database B+ Tree, but which is treated as an append at a local "hotpoint" in the B+ Tree per second.  [Dev Only]
3056=B+ Tree Vertical Splits/sec
3057=B+ Tree Vertical Splits/sec is the count of times a page is split vertically in a database B+ Tree per second.  [Dev Only]
3058=B+ Tree Splits/sec
3059=B+ Tree Splits/sec is the count of times a page is appended to or split in a database B+ Tree per second.  [Dev Only]
3060=B+ Tree Empty Page Merges/sec
3061=B+ Tree Empty Page Merges/sec is the count of empty pages removed from a database B+ Tree per second.  [Dev Only]
3062=B+ Tree Right Merges/sec
3063=Right Merges/sec is the count of pages removed from a database B+ Tree per second by moving all its records to the next page to the right.  [Dev Only]
3064=B+ Tree Partial Merges/sec
3065=B+ Tree Partial Merges/sec is the count of pages where some of its records are moved to a page on the right in a database B+ Tree per second.  [Dev Only]
3066=B+ Tree Merges/sec
3067=B+ Tree Merges/sec is the count of pages merged in a database B+ Tree per second.  [Dev Only]
3068=B+ Tree Failed Simple Page Cleanup Attempts/sec
3069=B+ Tree Failed Simple Page Cleanup Attempts/sec is the rate that attempts to reclaim deleted node space on a page are unsuccessful due to a conflict when attempting to write-latch the page. The cleanup is re-tried by locking the root of the B+ Tree.  [Dev Only]
3070=B+ Tree Seek Short Circuits/sec
3071=B+ Tree Seek Short Circuits/sec is the count of repeated seeks to the same record in a database B+ Tree that are saved by jumping directly to the cached physical location of that record per second.  [Dev Only]
3072=B+ Tree Unnecessary Sibling Latches/sec
3073=B+ Tree Unnecessary Sibling Latches/sec is the count of sibling pages latched during a database B+ Tree Delete in the hopes of performing a merge where a merge is not possible, making that latch unnecessary.  [Dev Only]
3074=B+ Tree Move Nexts/sec
3075=B+ Tree Move Nexts/sec is the count of times the database engine moves to the next record in a B+ Tree per second.  [Dev Only]
3076=B+ Tree Move Nexts (Non-Visible Nodes Skipped)/sec
3077=B+ Tree Move Nexts (Non-Visible Nodes Skipped)/sec is the count of times the database engine skips non-visible records while attempting to move to the next visible record in a B+ Tree per second.  [Dev Only]
3078=B+ Tree Move Prevs/sec
3079=B+ Tree Move Prevs/sec is the count of times the database engine moves to the previous record in a B+ Tree per second.  [Dev Only]
3080=B+ Tree Move Prevs (Non-Visible Nodes Skipped)/sec
3081=B+ Tree Move Prevs (Non-Visible Nodes Skipped)/sec is the count of times the database engine skips non-visible records while attempting to move to the previous visible record in a B+ Tree per second.  [Dev Only]
3082=B+ Tree Seeks/sec
3083=B+ Tree Seeks/sec is the count of times a record is seeked to by a key in a database B+ Tree per second.  [Dev Only]
3084=B+ Tree Inserts/sec
3085=B+ Tree Inserts/sec is the count of times a record is inserted in a database B+ Tree per second.  [Dev Only]
3086=B+ Tree Replaces/sec
3087=B+ Tree Replaces/sec is the count of times a record is replaced in a database B+ Tree per second.  [Dev Only]
3088=B+ Tree Flag Deletes/sec
3089=B+ Tree Flag Deletes/sec is the count of times a record is flag deleted in a database B+ Tree per second.  [Dev Only]
3090=B+ Tree Deletes/sec
3091=B+ Tree Deletes/sec is the count of times a record is deleted in a database B+ Tree per second.  [Dev Only]
3092=B+ Tree Appends/sec
3093=B+ Tree Appends/sec is the count of times a record is appended to a database B+ Tree per second.  [Dev Only]
3094=B+ Tree Creates/sec
3095=B+ Tree Creates/sec is the number of B+ Trees and their corresponding space trees (if any) created per second.  This can also be viewed as the number of FDP creates per second.  [Dev Only]
3096=B+ Tree Creates (Total)
3097=B+ Tree Creates (Total) is the total number of B+ Trees and their corresponding space trees (if any) created.  This can also be viewed as the total number of FDP creates.  [Dev Only]
3098=B+ Tree Destroys/sec
3099=B+ Tree Destroys/sec is the number of B+ Trees and their corresponding space trees (if any) destroyed per second.  This can also be viewed as the number of FDP destroys per second.  [Dev Only]
3100=B+ Tree Destroys (Total)
3101=B+ Tree Destroys (Total) is the total number of B+ Trees and their corresponding space trees (if any) destroyed.  This can also be viewed as the total number of FDP destroys.  [Dev Only]
3102=Database Pages Read Async/sec
3103=Database Pages Read Async/sec is the rate that pages are asynchronously read from the database file(s) into the database cache.  [Dev Only]
3104=Database Pages Read Sync/sec
3105=Database Pages Read Sync/sec is the rate that pages are synchronously read from the database file(s) into the database cache.  [Dev Only]
3106=Database Pages Written/sec
3107=Database Pages Written/sec is the rate that pages are written to the database file (s) from the database cache.  [Dev Only]
3108=Database Pages Transferred/sec
3109=Database Pages Transferred/sec is the rate that pages are transferred from the database file(s) to the database cache and vice versa.  [Dev Only]
3110=Database Pages Preread/sec
3111=Database Pages Preread/sec is the rate that pages are read in anticipation of future use from the database file(s) into the database cache.  [Dev Only]
3112=Database Cached Pages Preread/sec
3113=Database Cached Pages Preread/sec is the rate that pages are read in anticipation of future use from the database file(s) into the database cache that are already cached.  This is non-ideal behavior that represents a waste of processing time.  [Dev Only]
3114=Database Pages Preread Untouched/sec
3115=Database Pages Preread Untouched/sec is the rate that pages are read in anticipation of future use from the database file(s) into the database cache that were subsequently thrown out without being used. This is non-ideal behavior that represents a waste of I/O bandwidth and processing time .  [Dev Only]
3116=Database Pages Versioned / sec
3117=Database Pages Versioned / sec is the rate at which pages in the database cache are being copied into new pages in the cache for the purpose of being asynchronously written while the current version of that page in the database file is still being modified.  This feature is primarily used to avoid cycles, branches, or long chains of flush order dependencies without requiring the pages involved to be synchronously written to disk.  [Dev Only]
3118=Database Pages Ordinarily Written/sec
3119=Database Pages Ordinarily Written/sec is the rate that pages are written to the database file (s) from the database cache in preparation for evicting them from the cache to make room for other data.  [Dev Only]
3120=Database Pages Anomalously Written/sec
3121=Database Pages Anomalously Written/sec is the rate that pages are written to the database file (s) from the database cache before they would ordinarily be written.  [Dev Only]
3122=Database Pages Opportunely Written/sec
3123=Database Pages Opportunely Written/sec is the rate that pages are written to the database file (s) from the database cache because they happen to be near other pages that must be written.  These additional writes are performed before they must happen in the hope that the total number of seeks required to write all the pages is reduced.  [Dev Only]
3124=Database Pages Repeatedly Written/sec
3125=Database Pages Repeatedly Written/sec is the rate that pages are written to the database file (s) from the database cache more than once in their lifetime in the cache.  These page writes represent extra writes above the theoretical minimum and can therefore be considered overhead.  [Dev Only]
3126=Database Pages Idly Written/sec
3127=Database Pages Idly Written/sec is the rate that pages are written to the database file (s) from the database cache because there is low disk activity.  [Dev Only]
3128=Database Pages Coalesced Written/sec
3129=Database Pages Coalesced Written/sec is the rate that pages are written to the database file (s) from the database cache coalesced with another page. [Dev Only]
3130=Database Pages Coalesced Read/sec
3131=Database Pages Coalesced Read/sec is the rate that pages are read from the database file (s) to the database cache coalesced with another page. [Dev Only]
3132=Streaming Backup Pages Read/sec
3133=Streaming Backup Pages Read/sec is the rate of database read operationsperformed for the purpose of streaming backups.
3134=Online Defrag Pages Referenced/sec
3135=Online Defrag Pages Referenced/sec is the rate at which online defragmentation is touching database pages.  [Dev Only]
3136=Online Defrag Pages Read/sec
3137=Online Defrag Pages Read/sec is the rate of database read operations being performed by online defragmentation. [Dev Only]
3138=Online Defrag Pages Preread/sec
3139=Online Defrag Pages Preread/sec is the rate at which database pages are read in anticipation of future use by online defragmentation.  [Dev Only]
3140=Online Defrag Pages Dirtied/sec
3141=Online Defrag Pages Dirtied/sec is the rate at which online defragmentation is modifying clean database pages. [Dev Only]
3142=Online Defrag Pages Re-Dirtied/sec
3143=Online Defrag Pages Re-Dirtied/sec is the rate at which online defragmentation is modifying database pages that already contained modifications.  [Dev Only]
3144=Online Defrag Log Records/sec
3145=Online Defrag Log Records/sec is the rate at which online defragmentation is generating log records.  [Dev Only]
3146=Online Defrag Average Log Bytes
3147=Online Defrag Average Log Bytes is the average size of the log records being generated by online defragmentation.  [Dev only]
3148=No name
3149=No text
3150=Database Tasks Pages Referenced/sec
3151=Database Tasks Pages Referenced/sec is the rate at which background database tasks are touching database pages. [Dev Only]
3152=Database Tasks Pages Read/sec
3153=Database Tasks Pages Read/sec is the rate of database read operations being performed by background database tasks. [Dev Only]
3154=Database Tasks Pages Preread/sec
3155=Database Tasks Pages Preread/sec is the rate at which database pages are read in anticipation of future use by background database tasks.  [Dev Only]
3156=Database Tasks Pages Dirtied/sec
3157=Database Tasks Pages Dirtied/sec is the rate at which background database tasks are modifying clean database pages. [Dev Only]
3158=Database Tasks Pages Re-Dirtied/sec
3159=Database Tasks Pages Re-Dirtied/sec is the rate at which background databases tasks are modifying database pages that already contained modifications.  [Dev Only]
3160=Database Tasks Log Records/sec
3161=Database Tasks Log Records/sec is the rate at which background database tasks are generating log records.  [Dev Only]
3162=Database Tasks Average Log Bytes
3163=Database Tasks Average Log Bytes is the average size of the log records being generated by background database tasks.  [Dev only]
3164=No name
3165=No text
3166=I/O Database Reads/sec
3167=I/O Database Reads/sec is the rate of database read operations completed.
3168=I/O Database Reads Average Latency
3169=I/O Database Reads Average Latency is the average length of time,  in milliseconds, per database read operation.
3170=No name
3171=No text
3172=I/O Database Reads Average Bytes
3173=I/O Database Reads Average Bytes is the average number of bytes transferred per database read operation.  [Dev Only]
3174=No name
3175=No text
3176=I/O Database Reads In Heap
3177=I/O Database Reads In Heap is the number of database read operations queued in the database engine's I/O heap and waiting to be issued.  [Dev Only]
3178=I/O Database Reads Async Pending
3179=I/O Database Reads Async Pending is the number of database read operations asynchronously pending completion.  [Dev Only]
3180=I/O Database Reads Abnormal Latency/sec
3181=I/O Database Reads Abnormal Latency/sec is the rate of database read operations that take an abnormally long length of time (default is 1 minute) to be serviced by the OS.  [Dev Only]
3182=I/O Log Reads/sec
3183=I/O Log Reads/sec is the rate of logfile read operations completed.
3184=I/O Log Reads Average Latency
3185=I/O Log Reads Average Latency is the average length of time, in milliseconds, per logfile read operation.  [Dev Only]
3186=No name
3187=No text
3188=I/O Log Reads Average Bytes
3189=I/O Log Reads Average Bytes is the average number of bytes transferred per logfile read operation.  [Dev Only]
3190=No name
3191=No text
3192=I/O Log Reads In Heap
3193=I/O Log Reads In Heap is the number of logfile read operations queued in the database engine's I/O heap and waiting to be issued.  [Dev Only]
3194=I/O Log Reads Async Pending
3195=I/O Log Reads Async Pending is the number of logfile read operations asynchronously pending completion.  [Dev Only]
3196=I/O Log Reads Abnormal Latency/sec
3197=I/O Log Reads Abnormal Latency/sec is the rate of logfile read operations that take an abnormally long length of time (default is 1 minute) to be serviced by the OS.  [Dev Only]
3198=I/O Database Writes/sec
3199=I/O Database Writes/sec is the rate of database write operations completed.
3200=I/O Database Writes Average Latency
3201=I/O Database Writes Average Latency is the average length of time,  in milliseconds, per database write operation.
3202=No name
3203=No text
3204=I/O Database Writes Average Bytes
3205=I/O Database Writes Average Bytes is the average number of bytes transferred per database write operation.  [Dev Only]
3206=No name
3207=No text
3208=I/O Database Writes In Heap
3209=I/O Database Writes In Heap is the number of database write operations queued in the database engine's I/O heap and waiting to be issued.  [Dev Only]
3210=I/O Database Writes Async Pending
3211=I/O Database Writes Async Pending is the number of database write operations asynchronously pending completion.  [Dev Only]
3212=I/O Database Writes Abnormal Latency/sec
3213=I/O Database Writes Abnormal Latency/sec is the rate of database write operations that take an abnormally long length of time (default is 1 minute) to be serviced by the OS.  [Dev Only]
3214=I/O Log Writes/sec
3215=I/O Log Writes/sec is the rate of logfile write operations completed.
3216=I/O Log Writes Average Latency
3217=I/O Log Writes Average Latency is the average length of time, in milliseconds, per logfile write operation.
3218=No name
3219=No text
3220=I/O Log Writes Average Bytes
3221=I/O Log Writes Average Bytes is the average number of bytes transferred per logfile write operation.  [Dev Only]
3222=No name
3223=No text
3224=I/O Log Writes In Heap
3225=I/O Log Writes In Heap is the number of logfile write operations queued in the database engine's I/O heap and waiting to be issued.  [Dev Only]
3226=I/O Log Writes Async Pending
3227=I/O Log Writes Async Pending is the number of logfile write operations asynchronously pending completion.  [Dev Only]
3228=I/O Log Writes Abnormal Latency/sec
3229=I/O Log Writes Abnormal Latency/sec is the rate of logfile write operations that take an abnormally long length of time (default is 1 minute) to be serviced by the OS.  [Dev Only]
3230=Distributed Transaction Coordinator
3231=Microsoft Distributed Transaction Coordinator performance counters
3232=Active Transactions
3233=Number of currently active transactions
3234=Committed Transactions
3235=Number of committed transactions
3236=Aborted Transactions
3237=Number of aborted transactions
3238=In Doubt Transactions
3239=Number of in doubt transactions
3240=Active Transactions Maximum
3241=Maximum number of transactions ever concurrently active
3242=Force Committed Transactions
3243=Number of transactions committed by the system administrator
3244=Force Aborted Transactions
3245=Number of transactions aborted by the system administrator
3246=Response Time -- Minimum
3247=Minimum time delta between transaction begin and commit
3248=Response Time -- Average
3249=Average time delta between transaction begin and commit
3250=Response Time -- Maximum
3251=Maximum time delta between transaction begin and commit
3252=Transactions/sec
3253=Transactions performed per second
3254=Committed Transactions/sec
3255=Transactions committed per second
3256=Aborted Transactions/sec
3257=Transactions aborted per second
3258=Terminal Services Session
3259=Terminal Services per-session resource monitoring.
3260=Input WdBytes
3261=Number of bytes input on this session after all protocol overhead has been removed.
3262=Input WdFrames
3263=The number of frames input after any additional protocol added frames have been removed.
3264=Input WaitForOutBuf
3265=The number of times that a wait for an available send buffer was done by the protocols on the client side of the connection.
3266=Input Frames
3267=Number of frames (packets) input on this Session.
3268=Input Bytes
3269=Number of bytes input on this session that includes all protocol overhead.
3270=Input Compressed Bytes
3271=Number of bytes input after compression. This number compared with the Total Bytes input is the compression ratio.
3272=Input Compress Flushes
3273=Number of input compression dictionary flushes. When the data can not be compressed, the compression dictionary is flushed so that newer data has a better chance of being compressed. Some causes of data not compressing includes transferring compressed files over Client Drive Mapping.
3274=Input Errors
3275=Number of input errors of all types. Some example input errors are lost ACK's, badly formed packets, etc.
3276=Input Timeouts
3277=The total number of timeouts on the communication line as seen from the client side of the connection. These are typically the result of a noisy line. On some high latency networks, this could be the result of the protocol timeout being too short. Increasing the protocol timeout on these types of lines will improve performance by reducing needless re-transmissions.
3278=Input Async Frame Error
3279=Number of input async framing errors. These can be caused by a noisy transmission line. Using a smaller packet size may help in some cases.
3280=Input Async Overrun
3281=Number of input async overrun errors. These can be caused by the baud rate being faster than the computer can handle, or a non-16550 serial line is used. Overruns can also occur if too many high speed serial lines are active at one time for the processor's power.
3282=Input Async Overflow
3283=Number of input async overflow errors. These can be caused by a lack of buffer space available on the host.
3284=Input Async Parity Error
3285=Number of input async parity errors. These can be caused by a noisy transmission line
3286=Input Transport Errors
3287=Number of Terminal Services transport-level errors on input.
3288=Output WdBytes
3289=Number of bytes output on this session after all protocol overhead has been removed.
3290=Output WdFrames
3291=The number of frames output before any additional protocol frames have been added.
3292=Output WaitForOutBuf
3293=This is the number of times that a wait for an available send buffer was done by the protocol on the server side of the connection.
3294=Output Frames
3295=Number of frames (packets) output on this session.
3296=Output Bytes
3297=Number of bytes output on this Session that includes all protocol overhead.
3298=Output Compressed Bytes
3299=Number of bytes output after compression. This number compared with the Total Bytes output is the compression ratio.
3300=Output Compress Flushes
3301=Number of output compression dictionary flushes. When the data can not be compressed, the compression dictionary is flushed so that newer data has a better chance of being compressed. Some causes of data not compressing includes transfering compressed files over Client Drive Mapping.
3302=Output Errors
3303=Number of output errors of all types. Some example output errors are lost ACK's, badly formed packets, etc.
3304=Output Timeouts
3305=The total number of timeouts on the communication line from the host side of the connection. These are typically the result of a noisy line. On some high latency networks, this could be the result of the protocol timeout being too short. Increasing the protocol timeout on these types of lines will improve performance by reducing needless re-transmissions.
3306=Output Async Frame Error
3307=Number of output async framing errors. This could be caused by a hardware or line problem.
3308=Output Async Overrun
3309=Number of output async overrun errors.
3310=Output Async Overflow
3311=Number of output async overflow errors.
3312=Output Async Parity Error
3313=Number of output async parity errors. These can be caused by a hardware or line problem.
3314=Output Transport Errors
3315=Number of Terminal Services transport-level errors on output.
3316=Total WdBytes
3317=Total number of bytes on this Session after all protocol overhead has been removed.
3318=Total WdFrames
3319=The total number of frames input and output before any additional protocol frames have been added.
3320=Total WaitForOutBuf
3321=The number of times that a wait for an available send buffer was done by the protocols on both the server and client sides of the connection.
3322=Total Frames
3323=Total number of frames (packets) on this Session.
3324=Total Bytes
3325=Total number of bytes on this Session that includes all protocol overhead.
3326=Total Compressed Bytes
3327=Total number of bytes after compression. This number compared with the total bytes is the compression ratio.
3328=Total Compress Flushes
3329=Total number of compression dictionary flushes. When the data can not be compressed, the compression dictionary is flushed so that newer data has a better chance of being compressed. Some causes of data not compressing includes transfering compressed files over Client Drive Mapping.
3330=Total Errors
3331=Total number of errors of all types. Some example errors are lost ACK's, badly formed packets, etc.
3332=Total Timeouts
3333=The total number of timeouts on the communication line from both the host and client sides of the connection. These are typically the result of a noisy line. On some high latency networks, this could be the result of the protocol timeout being too short. Increasing the protocol timeout on these types of lines will improve performance by reducing needless re-transmissions.
3334=Total Async Frame Error
3335=Total number of async framing errors. These can be caused by a noisy transmission line. Using a smaller packet size may help in some cases.
3336=Total Async Overrun
3337=Total number of async overrun errors. These can be caused by the baud rate being faster than the computer can handle, or a non-16550 serial line is used. Overruns can also occur if too many high speed serial lines are active at one time for the processor's power.
3338=Total Async Overflow
3339=Total number of async overflow errors. These can be caused by a lack of buffer space available on the host.
3340=Total Async Parity Error
3341=Total number of async parity errors. These can be caused by a noisy transmission line.
3342=Total Transport Errors
3343=Total number of Terminal Services transport-level errors.
3344=Total Protocol Cache Reads
3345=Total references to all protocol caches.
3346=Total Protocol Cache Hits
3347=Total hits in all protocol caches. The protocol caches Windows objects that are likely to be re-used to avoid having to re-send them on the transmission line. Example objects are Windows icons and brushes. Hits in the cache represent objects that did not need to be re-sent.
3348=Total Protocol Cache Hit Ratio
3349=Overall hit ratio for all protocol caches.
3350=Protocol Bitmap Cache Reads
3351=Number of references to the protocol bitmap cache.
3352=Protocol Bitmap Cache Hits
3353=Number of hits in the protocol bitmap cache.
3354=Protocol Bitmap Cache Hit Ratio
3355=Hit ratio in the protocol bitmap cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache.
3356=Protocol Glyph Cache Reads
3357=Number of references to the protocol glyph cache.
3358=Protocol Glyph Cache Hits
3359=Number of hits in the protocol glyph cache.
3360=Protocol Glyph Cache Hit Ratio
3361=Hit ratio in the protocol glyph cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache.
3362=Protocol Brush Cache Reads
3363=Number of references to the protocol brush cache.
3364=Protocol Brush Cache Hits
3365=Number of hits in the protocol brush cache.
3366=Protocol Brush Cache Hit Ratio
3367=Hit ratio in the protocol brush cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache.
3368=Protocol Save Screen Bitmap Cache Reads
3369=Number of references to the protocol save screen bitmap cache.
3370=Protocol Save Screen Bitmap Cache Hits
3371=Number of hits in the protocol save screen bitmap cache.
3372=Protocol Save Screen Bitmap Cache Hit Ratio
3373=Hit ratio in the protocol save screen bitmap cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache.
3374=Input Compression Ratio
3375=Compression ratio of the server input data stream.
3376=Output Compression Ratio
3377=Compression ratio of the server output data stream.
3378=Total Compression Ratio
3379=Total compression ratio of the server data stream.
3444=Bulk Bytes/Sec
3445=Displays the current bulk transfer rate in bytes/sec.
3446=Isochronous Bytes/Sec
3447=Displays the current isochronous transfer rate in bytes/sec.
3448=Interrupt Bytes/Sec
3449=Displays the current interrupt transfer rate in bytes/sec.
3450=Control Data Bytes/Sec
3451=Displays the current control transfer rate in bytes/sec.
3452=Controller PCI Interrupts/Sec
3453=Displays the rate of PCI interrupt generation by the USB controller. For controller instances only.
3454=Controller WorkSignals/Sec
3455=Displays the current rate Work Signals generated per second by the usbport driver.  For controller instances only.
3456=% Total Bandwidth Used for Interrupt
3457=Displays the percentage of BW reserved for interrupt transfers
3458=% Total Bandwidth Used for Iso
3459=Displays the percentage of BW reserved for ISO transfers
3460=USB
3461=USB I/O Counters
3462=Avg. Bytes/Transfer
3463=Displays the average size of all transfer URBs. For device instances only.
3464=Iso Packet Errors/Sec
3465=Number of ISO packets that are NOT late, but complete with an error. For device instances only.
3466=Avg ms latency for ISO transfers
3467=Avg number of ms between the current frame and the start frame of an ISO transfer when scheduled.  For device instances only.
3468=Transfer Errors/Sec
3469=Number of Transfer URBs completing with an error status. For device instances only.
3470=Host Controller Idle
3471=Non-zero value if the host controller is not running(idle).
3472=Host Controller Async Idle
3473=Non-Zero value if the host controller async schedule is not running(idle).
3474=Host Controller Async Cache Flush Count
3475=Incremented each time the controller async cache is flushed.
3476=Host Controller Perdiodic Idle
3477=Non-Zero if the periodic schedule is not running(idle).
3478=Host Controller Periodic Cache Flush Count
3479=Incremented each time the controller periodic cache is flushed.
3480=.NET CLR Networking
3481=Help not available.
3482=Connections Established
3483=The cumulative total number of socket connections established for this process since the process was started.
3484=Bytes Received
3485=The cumulative total number of bytes received over all open socket connections since the process was started. This number includes data and any protocol information that is not defined by the TCP/IP protocol.
3486=Bytes Sent
3487=The cumulative total number of bytes sent over all open socket connections since the process was started. This number includes data and any protocol information that is not defined by the TCP/IP protocol.
3488=Datagrams Received
3489=The cumulative total number of datagram packets received since the process was started.
3490=Datagrams Sent
3491=The cumulative total number of datagram packets sent since the process was started.
3492=.NET Data Provider for SqlServer
3493=Counters for System.Data.SqlClient
3494=HardConnectsPerSecond
3495=The number of actual connections per second that are being made to servers
3496=HardDisconnectsPerSecond
3497=The number of actual disconnects per second that are being made to servers
3498=SoftConnectsPerSecond
3499=The number of connections we get from the pool per second
3500=SoftDisconnectsPerSecond
3501=The number of connections we return to the pool per second
3502=NumberOfNonPooledConnections
3503=The number of connections that are not using connection pooling
3504=NumberOfPooledConnections
3505=The number of connections that are managed by the connection pooler
3506=NumberOfActiveConnectionPoolGroups
3507=The number of unique connection strings
3508=NumberOfInactiveConnectionPoolGroups
3509=The number of unique connection strings waiting for pruning
3510=NumberOfActiveConnectionPools
3511=The number of active connection pools
3512=NumberOfInactiveConnectionPools
3513=The number of inactive connection pools
3514=NumberOfActiveConnections
3515=The number of connections currently in-use
3516=NumberOfFreeConnections
3517=The number of connections currently available for use
3518=NumberOfStasisConnections
3519=The number of connections currently waiting to be made ready for use
3520=NumberOfReclaimedConnections
3521=The number of connections we reclaim from GCed external connections
3522=.NET CLR Data
3523=.Net CLR Data
3524=SqlClient: Current # pooled and nonpooled connections
3525=Current number of connections, pooled or not.
3526=SqlClient: Current # pooled connections
3527=Current number of connections in all pools associated with the process.
3528=SqlClient: Current # connection pools
3529=Current number of pools associated with the process.
3530=SqlClient: Peak # pooled connections
3531=The highest number of connections in all pools since the process started.
3532=SqlClient: Total # failed connects
3533=The total number of connection open attempts that have failed for any reason.
3534=SqlClient: Total # failed commands
3535=The total number of command executes that have failed for any reason.
3536=.NET CLR Memory
3537=Counters for CLR Garbage Collected heap.
3538=# Gen 0 Collections
3539=This counter displays the number of times the generation 0 objects (youngest; most recently allocated) are garbage collected (Gen 0 GC) since the start of the application. Gen 0 GC occurs when the available memory in generation 0 is not sufficient to satisfy an allocation request. This counter is incremented at the end of a Gen 0 GC. Higher generation GCs include all lower generation GCs. This counter is explicitly incremented when a higher generation (Gen 1 or Gen 2) GC occurs. _Global_ counter value is not accurate and should be ignored. This counter displays the last observed value.
3540=# Gen 1 Collections
3541=This counter displays the number of times the generation 1 objects are garbage collected since the start of the application. The counter is incremented at the end of a Gen 1 GC. Higher generation GCs include all lower generation GCs. This counter is explicitly incremented when a higher generation (Gen 2) GC occurs. _Global_ counter value is not accurate and should be ignored. This counter displays the last observed value.
3542=# Gen 2 Collections
3543=This counter displays the number of times the generation 2 objects (older) are garbage collected since the start of the application. The counter is incremented at the end of a Gen 2 GC (also called full GC). _Global_ counter value is not accurate and should be ignored. This counter displays the last observed value.
3544=Promoted Memory from Gen 0
3545=This counter displays the bytes of memory that survive garbage collection (GC) and are promoted from generation 0 to generation 1; objects that are promoted just because they are waiting to be finalized are not included in this counter. This counter displays the value observed at the end of the last GC; its not a cumulative counter.
3546=Promoted Memory from Gen 1
3547=This counter displays the bytes of memory that survive garbage collection (GC) and are promoted from generation 1 to generation 2; objects that are promoted just because they are waiting to be finalized are not included in this counter. This counter displays the value observed at the end of the last GC; its not a cumulative counter. This counter is reset to 0 if the last GC was a Gen 0 GC only.
3548=Gen 0 Promoted Bytes/Sec
3549=This counter displays the bytes per second that are promoted from generation 0 (youngest) to generation 1; objects that are promoted just because they are waiting to be finalized are not included in this counter. Memory is promoted when it survives a garbage collection. This counter was designed as an indicator of relatively long-lived objects being created per sec. This counter displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3550=Gen 1 Promoted Bytes/Sec
3551=This counter displays the bytes per second that are promoted from generation 1 to generation 2 (oldest); objects that are promoted just because they are waiting to be finalized are not included in this counter. Memory is promoted when it survives a garbage collection. Nothing is promoted from generation 2 since it is the oldest. This counter was designed as an indicator of very long-lived objects being created per sec. This counter displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3552=Promoted Finalization-Memory from Gen 0
3553=This counter displays the bytes of memory that are promoted from generation 0 to generation 1 just because they are waiting to be finalized. This counter displays the value observed at the end of the last GC; its not a cumulative counter.
3554=Process ID
3555=This counter displays the process ID of the CLR process instance being monitored.
3556=Gen 0 heap size
3557=This counter displays the maximum bytes that can be allocated in generation 0 (Gen 0); its does not indicate the current number of bytes allocated in Gen 0. A Gen 0 GC is triggered when the allocations since the last GC exceed this size. The Gen 0 size is tuned by the Garbage Collector and can change during the execution of the application. At the end of a Gen 0 collection the size of the Gen 0 heap is infact 0 bytes; this counter displays the size (in bytes) of allocations that would trigger the next Gen 0 GC. This counter is updated at the end of a GC; its not updated on every allocation.
3558=Gen 1 heap size
3559=This counter displays the current number of bytes in generation 1 (Gen 1); this counter does not display the maximum size of Gen 1. Objects are not directly allocated in this generation; they are promoted from previous Gen 0 GCs. This counter is updated at the end of a GC; its not updated on every allocation.
3560=Gen 2 heap size
3561=This counter displays the current number of bytes in generation 2 (Gen 2). Objects are not directly allocated in this generation; they are promoted from Gen 1 during previous Gen 1 GCs. This counter is updated at the end of a GC; its not updated on every allocation.
3562=Large Object Heap size
3563=This counter displays the current size of the Large Object Heap in bytes. Objects greater than 20 KBytes are treated as large objects by the Garbage Collector and are directly allocated in a special heap; they are not promoted through the generations. This counter is updated at the end of a GC; its not updated on every allocation.
3564=Finalization Survivors
3565=This counter displays the number of garbage collected objects that survive a collection because they are waiting to be finalized. If these objects hold references to other objects then those objects also survive but are not counted by this counter; the "Promoted Finalization-Memory from Gen 0" and "Promoted Finalization-Memory from Gen 1" counters represent all the memory that survived due to finalization. This counter is not a cumulative counter; its updated at the end of every GC with count of the survivors during that particular GC only. This counter was designed to indicate the extra overhead that the application might incur because of finalization.
3566=# GC Handles
3567=This counter displays the current number of GC Handles in use. GCHandles are handles to resources external to the CLR and the managed environment. Handles occupy small amounts of memory in the GCHeap but potentially expensive unmanaged resources.
3568=Allocated Bytes/sec
3569=This counter displays the rate of bytes per second allocated on the GC Heap. This counter is updated at the end of every GC; not at each allocation. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3570=# Induced GC
3571=This counter displays the peak number of times a garbage collection was performed because of an explicit call to GC.Collect. Its a good practice to let the GC tune the frequency of its collections.
3572=% Time in GC
3573=% Time in GC is the percentage of elapsed time that was spent in performing a garbage collection (GC) since the last GC cycle. This counter is usually an indicator of the work done by the Garbage Collector on behalf of the application to collect and compact memory. This counter is updated only at the end of every GC and the counter value reflects the last observed value; its not an average.
3574=Not Displayed
3575=Not Displayed.
3576=# Bytes in all Heaps
3577=This counter is the sum of four other counters; Gen 0 Heap Size; Gen 1 Heap Size; Gen 2 Heap Size and the Large Object Heap Size. This counter indicates the current memory allocated in bytes on the GC Heaps.
3578=# Total committed Bytes
3579=This counter displays the amount of virtual memory (in bytes) currently committed by the Garbage Collector. (Committed memory is the physical memory for which space has been reserved on the disk paging file).
3580=# Total reserved Bytes
3581=This counter displays the amount of virtual memory (in bytes) currently reserved by the Garbage Collector. (Reserved memory is the virtual memory space reserved for the application but no disk or main memory pages have been used.)
3582=# of Pinned Objects
3583=This counter displays the number of pinned objects encountered in the last GC. This counter tracks the pinned objects only in the heaps that were garbage collected e.g. a Gen 0 GC would cause enumeration of pinned objects in the generation 0 heap only. A pinned object is one that the Garbage Collector cannot move in memory.
3584=# of Sink Blocks in use
3585=This counter displays the current number of sync blocks in use. Sync blocks are per-object data structures allocated for storing synchronization information. Sync blocks hold weak references to managed objects and need to be scanned by the Garbage Collector. Sync blocks are not limited to storing synchronization information and can also store COM interop metadata. This counter was designed to indicate performance problems with heavy use of synchronization primitives.
3586=.NET CLR Loading
3587=Statistics for CLR Class Loader.
3588=Total Classes Loaded
3589=This counter displays the cumulative number of classes loaded in all Assemblies since the start of this application.
3590=% Time Loading
3591=Reserved for future use.
3592=Assembly Search Length
3593=Reserved for future use.
3594=Total # of Load Failures
3595=This counter displays the peak number of classes that have failed to load since the start of the application. These load failures could be due to many reasons like inadequate security or illegal format. Full details can be found in the profiling services help.
3596=Rate of Load Failures
3597=This counter displays the number of classes that failed to load per second. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval. These load failures could be due to many reasons like inadequate security or illegal format. Full details can be found in the profiling services help.
3598=Bytes in Loader Heap
3599=This counter displays the current size (in bytes) of the memory committed by the class loader across all AppDomains. (Committed memory is the physical memory for which space has been reserved on the disk paging file.)
3600=Total appdomains unloaded
3601=This counter displays the total number of AppDomains unloaded since the start of the application. If an AppDomain is loaded and unloaded multiple times this counter would count each of those unloads as separate.
3602=Rate of appdomains unloaded
3603=This counter displays the number of AppDomains unloaded per second. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3604=Current Classes Loaded
3605=This counter displays the current number of classes loaded in all Assemblies.
3606=Rate of Classes Loaded
3607=This counter displays the number of classes loaded per second in all Assemblies. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3608=Current appdomains
3609=This counter displays the current number of AppDomains loaded in this application. AppDomains (application domains) provide a secure and versatile unit of processing that the CLR can use to provide isolation between applications running in the same process.
3610=Total Appdomains
3611=This counter displays the peak number of AppDomains loaded since the start of this application. AppDomains (application domains) provide a secure and versatile unit of processing that the CLR can use to provide isolation between applications running in the same process.
3612=Rate of appdomains
3613=This counter displays the number of AppDomains loaded per second. AppDomains (application domains) provide a secure and versatile unit of processing that the CLR can use to provide isolation between applications running in the same process. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3614=Current Assemblies
3615=This counter displays the current number of Assemblies loaded across all AppDomains in this application. If the Assembly is loaded as domain-neutral from multiple AppDomains then this counter is incremented once only. Assemblies can be loaded as domain-neutral when their code can be shared by all AppDomains or they can be loaded as domain-specific when their code is private to the AppDomain.
3616=Total Assemblies
3617=This counter displays the total number of Assemblies loaded since the start of this application. If the Assembly is loaded as domain-neutral from multiple AppDomains then this counter is incremented once only. Assemblies can be loaded as domain-neutral when their code can be shared by all AppDomains or they can be loaded as domain-specific when their code is private to the AppDomain.
3618=Rate of Assemblies
3619=This counter displays the number of Assemblies loaded across all AppDomains per second. If the Assembly is loaded as domain-neutral from multiple AppDomains then this counter is incremented once only. Assemblies can be loaded as domain-neutral when their code can be shared by all AppDomains or they can be loaded as domain-specific when their code is private to the AppDomain. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3620=.NET CLR Jit
3621=Stats for CLR Jit.
3622=# of Methods Jitted
3623=This counter displays the total number of methods compiled Just-In-Time (JIT) by the CLR JIT compiler since the start of the application. This counter does not include the pre-jitted methods.
3624=# of IL Bytes Jitted
3625=This counter displays the total IL bytes jitted since the start of the application. This counter is exactly equivalent to the "Total # of IL Bytes Jitted" counter.
3626=Total # of IL Bytes Jitted
3627=This counter displays the total IL bytes jitted since the start of the application. This counter is exactly equivalent to the "# of IL Bytes Jitted" counter.
3628=IL Bytes Jitted / sec
3629=This counter displays the rate at which IL bytes are jitted per second. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3630=Standard Jit Failures
3631=This counter displays the peak number of methods the JIT compiler has failed to JIT since the start of the application. This failure can occur if the IL cannot be verified or if there was an internal error in the JIT compiler.
3632=% Time in Jit
3633=This counter displays the percentage of elapsed time spent in JIT compilation since the last JIT compilation phase. This counter is updated at the end of every JIT compilation phase. A JIT compilation phase is the phase when a method and its dependencies are being compiled.
3634=Not Displayed
3635=Not Displayed.
3636=.NET CLR Interop
3637=Stats for CLR interop.
3638=# of CCWs
3639=This counter displays the current number of Com-Callable-Wrappers (CCWs). A CCW is a proxy for the .NET managed object being referenced from unmanaged COM client(s). This counter was designed to indicate the number of managed objects being referenced by unmanaged COM code.
3640=# of Stubs
3641=This counter displays the current number of stubs created by the CLR. Stubs are responsible for marshalling arguments and return values from managed to unmanaged code and vice versa; during a COM Interop call or PInvoke call.
3642=# of marshalling
3643=This counter displays the total number of times arguments and return values have been marshaled from managed to unmanaged code and vice versa since the start of the application. This counter is not incremented if the stubs are inlined. (Stubs are responsible for marshalling arguments and return values). Stubs usually get inlined if the marshalling overhead is small.
3644=# of TLB imports / sec
3645=Reserved for future use.
3646=# of TLB exports / sec
3647=Reserved for future use.
3648=.NET CLR LocksAndThreads
3649=Stats for CLR Locks and Threads.
3650=Total # of Contentions
3651=This counter displays the total number of times threads in the CLR have attempted to acquire a managed lock unsuccessfully. Managed locks can be acquired in many ways; by the "lock" statement in C# or by calling System.Monitor.Enter or by using MethodImplOptions.Synchronized custom attribute.
3652=Contention Rate / sec
3653=Rate at which threads in the runtime attempt to acquire a managed lock unsuccessfully. Managed locks can be acquired in many ways; by the "lock" statement in C# or by calling System.Monitor.Enter or by using MethodImplOptions.Synchronized custom attribute.
3654=Current Queue Length
3655=This counter displays the total number of threads currently waiting to acquire some managed lock in the application. This counter is not an average over time; it displays the last observed value.
3656=Queue Length Peak
3657=This counter displays the total number of threads that waited to acquire some managed lock since the start of the application.
3658=Queue Length / sec
3659=This counter displays the number of threads per second waiting to acquire some lock in the application. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3660=# of current logical Threads
3661=This counter displays the number of current .NET thread objects in the application. A .NET thread object is created either by new System.Threading.Thread or when an unmanaged thread enters the managed environment. This counters maintains the count of both running and stopped threads. This counter is not an average over time; it just displays the last observed value.
3662=# of current physical Threads
3663=This counter displays the number of native OS threads created and owned by the CLR to act as underlying threads for .NET thread objects. This counters value does not include the threads used by the CLR in its internal operations; it is a subset of the threads in the OS process.
3664=# of current recognized threads
3665=This counter displays the number of threads that are currently recognized by the CLR; they have a corresponding .NET thread object associated with them. These threads are not created by the CLR; they are created outside the CLR but have since run inside the CLR at least once. Only unique threads are tracked; threads with same thread ID re-entering the CLR or recreated after thread exit are not counted twice.
3666=# of total recognized threads
3667=This counter displays the total number of threads that have been recognized by the CLR since the start of this application; these threads have a corresponding .NET thread object associated with them. These threads are not created by the CLR; they are created outside the CLR but have since run inside the CLR at least once. Only unique threads are tracked; threads with same thread ID re-entering the CLR or recreated after thread exit are not counted twice.
3668=rate of recognized threads / sec
3669=This counter displays the number of threads per second that have been recognized by the CLR; these threads have a corresponding .NET thread object associated with them. These threads are not created by the CLR; they are created outside the CLR but have since run inside the CLR at least once. Only unique threads are tracked; threads with same thread ID re-entering the CLR or recreated after thread exit are not counted twice. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3670=.NET CLR Security
3671=Stats for CLR Security.
3672=Total Runtime Checks
3673=This counter displays the total number of runtime Code Access Security (CAS) checks performed since the start of the application. Runtime CAS checks are performed when a caller makes a call to a callee demanding a particular permission; the runtime check is made on every call by the caller; the check is done by examining the current thread stack of the caller. This counter used together with "Stack Walk Depth" is indicative of performance penalty for security checks.
3674=% Time Sig. Authenticating
3675=Reserved for future use.
3676=# Link Time Checks
3677=This counter displays the total number of linktime Code Access Security (CAS) checks since the start of the application. Linktime CAS checks are performed when a caller makes a call to a callee demanding a particular permission at JIT compile time; linktime check is performed once per caller. This count is not indicative of serious performance issues; its indicative of the security system activity.
3678=% Time in RT checks
3679=This counter displays the percentage of elapsed time spent in performing runtime Code Access Security (CAS) checks since the last such check. CAS allows code to be trusted to varying degrees and enforces these varying levels of trust depending on code identity. This counter is updated at the end of a runtime security check; it represents the last observed value; its not an average.
3680=Not Displayed
3681=Not Displayed.
3682=Stack Walk Depth
3683=This counter displays the depth of the stack during that last runtime Code Access Security check. Runtime Code Access Security check is performed by crawling the stack. This counter is not an average; it just displays the last observed value.
3684=.NET CLR Remoting
3685=Stats for CLR Remoting.
3686=Remote Calls/sec
3687=This counter displays the number of remote procedure calls invoked per second. A remote procedure call is a call on any object outside the caller;s AppDomain. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3688=Channels
3689=This counter displays the total number of remoting channels registered across all AppDomains since the start of the application. Channels are used to transport messages to and from remote objects.
3690=Context Proxies
3691=This counter displays the total number of remoting proxy objects created in this process since the start of the process. Proxy object acts as a representative of the remote objects and ensures that all calls made on the proxy are forwarded to the correct remote object instance.
3692=Context-Bound Classes Loaded
3693=This counter displays the current number of context-bound classes loaded. Classes that can be bound to a context are called context-bound classes; context-bound classes are marked with Context Attributes which provide usage rules for synchronization; thread affinity; transactions etc.
3694=Context-Bound Objects Alloc / sec
3695=This counter displays the number of context-bound objects allocated per second. Instances of classes that can be bound to a context are called context-bound objects; context-bound classes are marked with Context Attributes which provide usage rules for synchronization; thread affinity; transactions etc. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3696=Contexts
3697=This counter displays the current number of remoting contexts in the application. A context is a boundary containing a collection of objects with the same usage rules like synchronization; thread affinity; transactions etc.
3698=Total Remote Calls
3699=This counter displays the total number of remote procedure calls invoked since the start of this application. A remote procedure call is a call on any object outside the caller;s AppDomain.
3700=.NET CLR Exceptions
3701=Runtime statistics on CLR exception handling.
3702=# of Exceps Thrown
3703=This counter displays the total number of exceptions thrown since the start of the application. These include both .NET exceptions and unmanaged exceptions that get converted into .NET exceptions e.g. null pointer reference exception in unmanaged code would get re-thrown in managed code as a .NET System.NullReferenceException; this counter includes both handled and unhandled exceptions. Exceptions that are re-thrown would get counted again. Exceptions should only occur in rare situations and not in the normal control flow of the program.
3704=# of Exceps Thrown / sec
3705=This counter displays the number of exceptions thrown per second. These include both .NET exceptions and unmanaged exceptions that get converted into .NET exceptions e.g. null pointer reference exception in unmanaged code would get re-thrown in managed code as a .NET System.NullReferenceException; this counter includes both handled and unhandled exceptions. Exceptions should only occur in rare situations and not in the normal control flow of the program; this counter was designed as an indicator of potential performance problems due to large (>100s) rate of exceptions thrown. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3706=# of Filters / sec
3707=This counter displays the number of .NET exception filters executed per second. An exception filter evaluates whether an exception should be handled or not. This counter tracks the rate of exception filters evaluated; irrespective of whether the exception was handled or not. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3708=# of Finallys / sec
3709=This counter displays the number of finally blocks executed per second. A finally block is guaranteed to be executed regardless of how the try block was exited. Only the finally blocks that are executed for an exception are counted; finally blocks on normal code paths are not counted by this counter. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3710=Throw To Catch Depth / sec
3711=This counter displays the number of stack frames traversed from the frame that threw the .NET exception to the frame that handled the exception per second. This counter resets to 0 when an exception handler is entered; so nested exceptions would show the handler to handler stack depth. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.
3712=.NET Data Provider for Oracle
3713=Counters for System.Data.OracleClient
3714=HardConnectsPerSecond
3715=The number of actual connections per second that are being made to servers
3716=HardDisconnectsPerSecond
3717=The number of actual disconnects per second that are being made to servers
3718=SoftConnectsPerSecond
3719=The number of connections we get from the pool per second
3720=SoftDisconnectsPerSecond
3721=The number of connections we return to the pool per second
3722=NumberOfNonPooledConnections
3723=The number of connections that are not using connection pooling
3724=NumberOfPooledConnections
3725=The number of connections that are managed by the connection pooler
3726=NumberOfActiveConnectionPoolGroups
3727=The number of unique connection strings
3728=NumberOfInactiveConnectionPoolGroups
3729=The number of unique connection strings waiting for pruning
3730=NumberOfActiveConnectionPools
3731=The number of active connection pools
3732=NumberOfInactiveConnectionPools
3733=The number of inactive connection pools
3734=NumberOfActiveConnections
3735=The number of connections currently in-use
3736=NumberOfFreeConnections
3737=The number of connections currently available for use
3738=NumberOfStasisConnections
3739=The number of connections currently waiting to be made ready for use
3740=NumberOfReclaimedConnections
3741=The number of connections we reclaim from GCed external connections