PC World Komputer 2010 April

home *** CD-ROM | disk | FTP | other *** search

/ PC World Komputer 2010 April / PCWorld0410.iso / WindowsServerTrial / server.iso / sources / boot.wim / 2 / Windows / inf / msports.inf < prev next >

Wrap

Windows Setup INFormation | 2008-01-19 | 40KB | 613 lines

■; MSPORTS.INF ; Copyright (c) Microsoft Corporation. All rights reserved. ;;++ Added by AddSDisk.cmd [SourceDisksNames] 3426=windows cd [SourceDisksFiles] parport.sys = 3426 parvdm.sys = 3426 serial.sys = 3426 serenum.sys = 3426 ;;-- [version] ;; Commented by AddSDisk.cmd ;; LayoutFile=layout.inf signature="$CHICAGO$" Class=Ports ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} Provider=%MS% DriverVer=06/21/2006,6.0.6001.18000 [DestinationDirs] DefaultDestDir = 11 ;LDID_SYS LptPort.NT.Copy = 12 ;DIRID_DRIVERS ComPort.NT.Copy = 12 ;DIRID_DRIVERS SerialEnumerator.NT.Copy=12 ;DIRID_DRIVERS NonPort.NT.Copy = 12 ;DIRID_DRIVERS [ControlFlags] ExcludeFromSelect=MF\EISA_HWP1C10_DEV0,MF\EISA_HWP1C10_DEV1 ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_A-0484 ; Socket PCMCIA Serial Adapter ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_B-12F8 ; Socket PCMCIA Serial Adapter ExcludeFromSelect=PCMCIA\Socket_Communications_Inc-Serial_Port_Adapter_Revision_B-5E3E ExcludeFromSelect=MF\SOCKETDUAL_DEV0,MF\SOCKETDUAL_DEV1 ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-PAGECARD_REVISION_A-FA29 ; Socket PCMCIA PageCard V3.0 ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_GPS_PCMCIA_GLOBAL_POSITIONING_SYSTEM_REVISION_B-AF8A ; Socket PCMCIA GPS Adapter ExcludeFromSelect=PCMCIA\SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_C-66D0 ; Socket PCMCIA GPS Adapter ExcludeFromSelect=PCMCIA\socket-serial_port_card_rev_2.3-e88f ExcludeFromSelect=PCMCIA\DATA_BROADCASTING_CORP-SIGNALCARD_RECEIVER-4E9B ; DBC SignalCard ExcludeFromSelect=PCMCIA\ROCKWELL-NAVCARD-64B7 ; Rockwell NavCard ExcludeFromSelect=PCMCIA\TRIMBLE_&_SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_B-6947 ExcludeFromSelect=PCMCIA\SMART_SERIAL_PORT-A0F6 ExcludeFromSelect=PCMCIA\Quatech_Inc-PCMCIA_RS-232_Serial_Port_Card-63EA ExcludeFromSelect=PCMCIA\Quatech_Inc-PCMCIA_Enhanced_Parallel_Port_Card-F060 ExcludeFromSelect=PCMCIA\TDC-TRANS_PC_CARD-37D0 ; TransDigital PC Card Universal Parallel Port ExcludeFromSelect=PCI\VEN_131F&DEV_1000&SUBSYS_00000000&REV_02 ; SIIG CyberSerial PCI Card ExcludeFromSelect=PCI\VEN_131F&DEV_2000&CC_0700 ; SIIG CyberSerial PCI Card ExcludeFromSelect=PCI\VEN_131F&DEV_1020&SUBSYS_00000000&REV_02 ; SIIG CyberParallel PCI Card ExcludeFromSelect=PCI\VEN_131F&DEV_1021&SUBSYS_00000000&REV_02 ; SIIG CyberParallel PCI Card ExcludeFromSelect=PCI\VEN_131F&DEV_2020&SUBSYS_2020131F&REV_00 ; SIIG CyberParallel PCI Card ExcludeFromSelect=PCI\VEN_1407&DEV_8000&SUBSYS_00000000&REV_00 ; Lava Parallel PCI Card ExcludeFromSelect=PCMCIA\ERICSSON-GC25-8C66 ; Ericsson GC25 ExcludeFromSelect=PCMCIA\COMPAQ-SPEEDPAQ_GSM_RADIO_PC_CARD-6D6C ; Compaq GSM Radio Card ; Drivers ;---------------------------------------------------------- [Manufacturer] %Std%=Std,NTx86 %HP%=HP,NTx86 %TDC%=TDC,NTx86 %Socket%=Socket,NTx86 %DBC%=DBC,NTx86 %Rockwell%=Rockwell,NTx86 %Trimble%=Trimble,NTx86 %Smart%=Smart,NTx86 %SIIG%=SIIG,NTx86 %Lava%=Lava,NTx86 %Ericsson%=Ericsson,NTx86 %Compaq%=Compaq,NTx86 %Quatech%=Quatech,NTx86 [Std.NTx86] %*PNP0400.DeviceDesc% = LptPort, *PNP0400 ; Printer Port %*PNP0401.DeviceDesc% = EcpPort, *PNP0401 ; ECP Printer Port %*PNP0500.DeviceDesc% = ComPort, *PNP0500, *PNP0501 ; Communications Port %*PNP0501.DeviceDesc% = ComPort, *PNP0501, *PNP0500 ; Communications Port %*PNP0502.DeviceDesc% = MultiComPort, *PNP0502 ; Multi Communications Port ; Compaq devices %*CPQA0E0.DeviceDesc% = EcpPort, *CPQA0E0 ; ECP Printer Port %*CPQA0D9.DeviceDesc% = ComPort, *CPQA0D9 ; Communications Port [HP.NTx86] ; Hewlett Packard devices %MF\EISA_HWP1C10_DEV0.DeviceDesc% = ComPort, MF\EISA_HWP1C10_DEV0 %MF\EISA_HWP1C10_DEV1.DeviceDesc% = LptPort, MF\EISA_HWP1C10_DEV1 [TDC] %TDC-37D0.DeviceDesc% = LptPort, "PCMCIA\TDC-TRANS_PC_CARD-37D0" [Socket.NTx86] %Socket-0484.DeviceDesc% = ComPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_A-0484" %Socket-12F8.DeviceDesc% = ComPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_IO_PCMCIA_SERIAL_PORT_ADAPTER_REVISION_B-12F8" %Socket-5E3E.DeviceDesc% = ComPort, "PCMCIA\Socket_Communications_Inc-Serial_Port_Adapter_Revision_B-5E3E" %SocketDual.DeviceDesc% = ComPort, MF\SOCKETDUAL_DEV0 %SocketDual.DeviceDesc% = ComPort, MF\SOCKETDUAL_DEV1 %Socket-0104-0001.DeviceDesc% = ComPort, "PCMCIA\socket-serial_port_card_rev_2.3-e88f" %Socket-FA29.DeviceDesc% = NonPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-PAGECARD_REVISION_A-FA29" %Socket-AF8A.DeviceDesc% = NonPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-SOCKET_GPS_PCMCIA_GLOBAL_POSITIONING_SYSTEM_REVISION_B-AF8A" %Socket-66D0.DeviceDesc% = NonPort, "PCMCIA\SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_C-66D0" [DBC.NTx86] %DBC-4E9B.DeviceDesc% = NonPort, "PCMCIA\DATA_BROADCASTING_CORP-SIGNALCARD_RECEIVER-4E9B" [Rockwell.NTx86] %Rockwell-64B7.DeviceDesc% = NonPort, "PCMCIA\ROCKWELL-NAVCARD-64B7" [Trimble.NTx86] %Trimble-6947.DeviceDesc% = NonPort, "PCMCIA\TRIMBLE_&_SOCKET_COMMUNICATIONS_INC-MOBILE_GPS_REVISION_B-6947" [Smart.NTx86] %Smart-A0F6.DeviceDesc% = ComPort, "PCMCIA\SMART_SERIAL_PORT-A0F6" [SIIG.NTx86] %SIIG-PCI_1_SERIAL.DeviceDesc% = ComPort, "PCI\VEN_131F&DEV_1000&SUBSYS_00000000&REV_02" %SIIG-PCI_1_CYBERSERIAL.DeviceDesc% = ComPort, "PCI\VEN_131F&DEV_2000&CC_0700" %SIIG-PCI_1_PARALLEL.DeviceDesc% = LptPort, "PCI\VEN_131F&DEV_1020&SUBSYS_00000000&REV_02" %SIIG-PCI_1_PARALLEL.DeviceDesc% = LptPort, "PCI\VEN_131F&DEV_1021&SUBSYS_00000000&REV_02" %SIIG-PCI_1_PARALLEL.DeviceDesc% = LptPort, "PCI\VEN_131F&DEV_2020&SUBSYS_2020131F&REV_00" [Lava] %Lava-PCI_1_PARALLEL.DeviceDesc% = LptPort, "PCI\VEN_1407&DEV_8000&SUBSYS_00000000&REV_00" [Ericsson.NTx86] %*ERIC.DeviceDesc% = ComPort, PCMCIA\ERICSSON-GC25-8C66 [Compaq.NTx86] %*COMP.DeviceDesc% = ComPort, PCMCIA\COMPAQ-SPEEDPAQ_GSM_RADIO_PC_CARD-6D6C [Quatech.NTx86] %Quatech-63EA.DeviceDesc% = ComPort, PCMCIA\Quatech_Inc-PCMCIA_RS-232_Serial_Port_Card-63EA %Quatech-F060.DeviceDesc% = LptPort, PCMCIA\Quatech_Inc-PCMCIA_Enhanced_Parallel_Port_Card-F060 ; LPT sections ;---------------------------------------------------------- [LptPort] CopyFiles=LptPort.Copy AddReg=LptPort.AddReg, LptPort.W95.AddReg LogConfig=lsnn,lsan,lann,laan [EcpPort] CopyFiles=LptPort.Copy AddReg=EcpPort.AddReg, LptPort.W95.AddReg LogConfig=lsnn,lsan,lsaa,lann,laaa [LptPort.Copy] lpt.vxd [LptPort.AddReg] HKR,,PortSubClass,1,00 HKR,,ECPDevice,1,00 [EcpPort.AddReg] HKR,,PortSubClass,1,00 HKR,,ECPDevice,1,01 [LptPort.W95.AddReg] HKR,,DevLoader,,*NTKERN HKR,,NTMPDriver,,"parport.sys,parclass.sys,parscan.sys" [LptPort.NT.AddReg] HKR,,EnumPropPages32,,"MsPorts.dll,ParallelPortPropPageProvider" [LptPort.NT] CopyFiles=LptPort.NT.Copy AddReg=LptPort.AddReg,LptPort.NT.AddReg LogConfig=lsnn,lsan,lann,laan [EcpPort.NT] CopyFiles=LptPort.NT.Copy AddReg=EcpPort.AddReg,LptPort.NT.AddReg LogConfig=lsnn,lsan,lsaa,lann,laaa [LptPort.NT.Copy] parport.sys,,,0x100 parvdm.sys,,,0x100 ;-------------- Service installation [LptPort.NT.Services] AddService = Parport, 0x00000002, Parport_Service_Inst, Parport_EventLog_Inst ; Port Driver (function driver for this device) AddService = Parvdm, 0x00000000, Parvdm_Service_Inst, Parvdm_EventLog_Inst ; Virtual Dos Machine Driver [EcpPort.NT.Services] AddService = Parport, 0x00000002, Parport_Service_Inst, Parport_EventLog_Inst ; Port Driver (function driver for this device) AddService = Parvdm, 0x00000000, Parvdm_Service_Inst, Parvdm_EventLog_Inst ; Virtual Dos Machine Driver ; -------------- Parallel Port Driver install sections [Parport_Service_Inst] DisplayName = %Parport.SVCDESC% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\parport.sys LoadOrderGroup = Parallel arbitrator [Parport_EventLog_Inst] AddReg = Parport_EventLog_AddReg [Parport_EventLog_AddReg] HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\parport.sys" HKR,,TypesSupported,0x00010001,7 ; -------------- ParVDM Driver install sections [Parvdm_Service_Inst] ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 2 ; SERVICE_AUTO_START ErrorControl = 0 ; SERVICE_ERROR_IGNORE ServiceBinary = %12%\parvdm.sys LoadOrderGroup = Extended Base Dependencies = +Parallel arbitrator,Parport Tag = 2 AddReg = Parvdm_Service_Addreg [Parvdm_Service_AddReg] HKR,Parameters,,0x00000012, [Parvdm_EventLog_Inst] AddReg = Parvdm_EventLog_AddReg [Parvdm_EventLog_AddReg] HKR,,EventMessageFile,0x00020002,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\parVdm.sys" HKR,,TypesSupported,0x00010003,7 ; The following sections are LPT and ECP port logical ; resource configurations. Section name format means: ; Char 1 = l (LPT port) ; Char 2 = I/O config: s (std), a (any) ; Char 3 = IRQ config: #, a (any), n (none) ; Char 4 = DMA config: a (any), n (none) [lsnn] ConfigPriority=HARDRECONFIG IOConfig=3bc-3be(3ff::),378-37a(3ff::),278-27a(3ff::) [lsan] ConfigPriority=HARDRECONFIG IOConfig=3bc-3be(3ff::),378-37a(3ff::),278-27a(3ff::) IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15 [lann] ConfigPriority=HARDRECONFIG IOConfig=8@100-3ff%fff8(3ff::) [laan] ConfigPriority=HARDRECONFIG IOConfig=8@100-3ff%fff8(3ff::) IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15 [lsaa] ConfigPriority=HARDRECONFIG IOConfig=3bc-3be(3ff::),378-37a(3ff::),278-27a(3ff::) IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15 DMAConfig=1,2,3,5,6,7 [laaa] ConfigPriority=HARDRECONFIG IOConfig=8@100-3ff%fff8(3ff::) IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15 DMAConfig=1,2,3,5,6,7 ; End LPT and ECP LogConfig sections [*pnp0400.det] AddReg=Ports.AddReg [Ports.AddReg] HKR,,NoSetupUI,,1 [*pnp0401.det] AddReg=Ports.AddReg [LptPort.PosDup] *PNP0401 [EcpPort.PosDup] *PNP0400 ; COM sections ;---------------------------------------------------------- [ComPort] CopyFiles=ComPort.Copy AddReg=ComPort.AddReg, ComPort.W95.AddReg LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa [ComPort.Copy] serial.vxd serialui.dll [ComPort.AddReg] HKR,,PortSubClass,1,01 [ComPort.W95.AddReg] HKR,,DevLoader,,*vcomm HKR,,Enumerator,,serenum.vxd HKR,,PortDriver,,serial.vxd HKR,,Contention,,*vcd HKR,,ConfigDialog,,serialui.dll HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00 HKR,,EnumPropPages,,"serialui.dll,EnumPropPages" [ComPort.NT] CopyFiles=ComPort.NT.Copy AddReg=ComPort.AddReg, ComPort.NT.AddReg LogConfig=c14,c1a,c23,c2a,c34,c3a,c43,c4a,caa SyssetupPnPFlags = 1 [ComPort.NT.HW] AddReg=ComPort.NT.HW.AddReg [ComPort.NT.Copy] serial.sys,,,0x100 serenum.sys,,,0x100 [ComPort.NT.AddReg] HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" ; Uncomment the following line if you want to override the advanced dialog for ; your device. See msports.h for protoype of OverrideAdvancedFunction ; HKR,,EnumAdvancedDialog,,"yourdll.dll,OverrideAdvancedFunction" [ComPort.NT.HW.AddReg] HKR,,"UpperFilters",0x00010000,"serenum" ; MultiPort COM Sections; ; ------------------------------------------------------- [MultiComPort.NT] CopyFiles=ComPort.NT.Copy AddReg=ComPort.AddReg, ComPort.NT.AddReg LogConfig=cm1,cm2,cm3,cm4,dg1,dga,cma SyssetupPnPFlags = 1 [MultiComPort.NT.HW] ; Add multiport and normal port into the hardware devnode AddReg=MultiComPort.NT.HW.AddReg,ComPort.NT.HW.AddReg [MultiComPort.NT.HW.AddReg] ; Add multiport specific info to the hardware devnode HKR,,MultiportDevice,0x00010001,1 ; The serial enumerator by itself, so that other INFs can install serenum w/out serial.sys ; ------------------------------------------------------- [SerialEnumerator.NT] CopyFiles=SerialEnumerator.NT.Copy [SerialEnumerator.NT.Copy] serenum.sys,,,0x100 ;-------------- Service installation ; Port Driver (function driver for this device) [ComPort.NT.Services] AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst AddService = Serenum,,Serenum_Service_Inst [MultiComPort.NT.Services] AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst AddService = Serenum,,Serenum_Service_Inst [SerialEnumerator.NT.Services] AddService = Serenum,,Serenum_Service_Inst ; -------------- Serial Port Driver install sections [Serial_Service_Inst] DisplayName = %Serial.SVCDESC% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 1 ; SERVICE_SYSTEM_START (this driver may do detection) ErrorControl = 0 ; SERVICE_ERROR_IGNORE ServiceBinary = %12%\serial.sys LoadOrderGroup = Extended base ; -------------- Serenum Driver install section [Serenum_Service_Inst] DisplayName = %Serenum.SVCDESC% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\serenum.sys LoadOrderGroup = PNP Filter [Serial_EventLog_Inst] AddReg = Serial_EventLog_AddReg [Serial_EventLog_AddReg] HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\serial.sys" HKR,,TypesSupported,0x00010001,7 [*pnp0500.det] AddReg=Ports.AddReg,DevMap.AddReg ; The following sections are COM port resource configs. ; Section name format means: ; Char 1 = c (COM port) ; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any) ; Char 3 = IRQ config: #, a (any) [c14] ; COM1,IRQ4 ConfigPriority=HARDRECONFIG IOConfig=3f8-3ff(3ff::) IRQConfig=S:4 [c1a] ; COM1, any IRQ ConfigPriority=HARDRECONFIG IOConfig=3f8-3ff(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [c23] ; COM2, IRQ3 ConfigPriority=HARDRECONFIG IOConfig=2f8-2ff(3ff::) IRQConfig=S:3 [c2a] ; COM2, any IRQ ConfigPriority=HARDRECONFIG IOConfig=2f8-2ff(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [c34] ; COM3, IRQ4 ConfigPriority=HARDRECONFIG IOConfig=3e8-3ef(3ff::) IRQConfig=S:4 [c3a] ; COM3, any IRQ ConfigPriority=HARDRECONFIG IOConfig=3e8-3ef(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [c43] ; COM4, IRQ3 ConfigPriority=HARDRECONFIG IOConfig=2e8-2ef(3ff::) IRQConfig=S:3,5 [c4a] ; COM4, any IRQ ConfigPriority=HARDRECONFIG IOConfig=2e8-2ef(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 [caa] ; Any base, any IRQ ConfigPriority=HARDRECONFIG IOConfig=8@100-ffff%fff8(3ff::) IRQConfig=S:3,4,5,7,9,10,11,12,14,15 ; The following are multiport configs for DigiBoard (dgxx) ; and Comtrol (cmxx) multiport boards ; Section name format means: ; Char 1,2 = manufacturer abbreviation ; Char 3 = config number, a = no idea, use base setting [cm1] ConfigPriority=HARDRECONFIG IOConfig=7@240-27E%3F8(3FF::) IOConfig=247-247(3FF::) IRQConfig=S:2,3,4,5,7,10,11 [cm2] ConfigPriority=HARDRECONFIG IOConfig=7@280-2BE%3F8(3FF::) IOConfig=287-287(3FF::) IRQConfig=S:2,3,4,5,7,10,11 [cm3] ConfigPriority=HARDRECONFIG IOConfig=7@500-5BE%FF8(3FF::) IOConfig=507-507(FFF::) IRQConfig=S:2,3,4,5,7,10,11 [cm4] ConfigPriority=HARDRECONFIG IOConfig=7@580-5BE%FF8(3FF::) IOConfig=587-587(3FF::) IRQConfig=S:2,3,4,5,7,10,11 [cma] ConfigPriority=HARDRECONFIG IOConfig=7@100-3FF%3F8(3FF::) IOConfig=1@100-3FF(3FF::) IRQConfig=S:2,3,4,5,7,10,11 [dg1] ConfigPriority=HARDRECONFIG IOConfig=7@100-17E%3F8(3FF::) IOConfig=140-140(3FF::) IRQConfig=S:3,4,5,6,7,9,10,11,12,14,15 [dga] ConfigPriority=HARDRECONFIG IOConfig=7@100-3FF%3F8(3FF::) IOConfig=1@100-3FF(3FF::) IRQConfig=S:3,4,5,6,7,9,10,11,12,14,15 ; End COM port LogConfig sections [ComPort.PosDup] *PNP0500,*PNP0501,*PNP0502 [ComPort.NT.PosDup] *PNP0500,*PNP0501,*PNP0502,*PNP0510,*PNP0511,*SMCF010,*NSC6001 [DevMap.AddReg] HKLM,hardware\devicemap\serialcomm,COM1,,COM1 HKLM,hardware\devicemap\serialcomm,COM2,,COM2 ; "NoDrv" section: We do not yet support these port devices. ;---------------------------------------------------------- [NoDrv] ; "Non-port" sections: PCMCIA cards that look like COM ; ports, but aren't (excluding modems). ;---------------------------------------------------------- [NonPort] CopyFiles=NonPort.Copy AddReg=NonPort.AddReg [NonPort.Copy] serial.vxd [NonPort.AddReg] HKR,,PortSubClass,1,01 HKR,,DevLoader,,*vcomm HKR,,PortDriver,,serial.vxd HKR,,Contention,,*vcd HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00 [NonPort.NT] ; ; Unclear whether these devices are presently supported under NT. For now, leave a blank ; install section so we won't run the Win9x stuff. The fact that no function driver will be installed ; for this devnode will cause the installation to fail, which is what we want to have happen for now. ; [Det.DevINFs] *pnp8215=netxir.inf ;Xircom PE3 *pnpa01e=scsi.inf ;Trantor T338 *pnpa01f=scsi.inf ;Trantor T348 *pnpa02f=scsi.inf ;Trantor T358 ;---------------------------------------------------------- [Strings] Lava="Lava Computer MFG Inc." Lava-PCI_1_PARALLEL.DeviceDesc ="Lava Parallel PCI Card" Quatech-F060.DeviceDesc = "Quatech Q-Lynx Parallel Adapter" MS = "Microsoft" Std = "(Standard port types)" *PNP0400.DeviceDesc = "Printer Port" *PNP0401.DeviceDesc = "ECP Printer Port" *PNP0500.DeviceDesc = "Communications Port" *PNP0501.DeviceDesc = "Communications Port" *PNP0502.DeviceDesc = "Multiport Communications Port" ; Compaq devices *CPQA0E0.DeviceDesc = "ECP Printer Port" *CPQA0D9.DeviceDesc = "Communications Port" HP = "Hewlett Packard" MF\EISA_HWP1C10_DEV0.DeviceDesc="HP Communications Port" MF\EISA_HWP1C10_DEV1.DeviceDesc="HP Printer Port" IBM="IBM" TDC="Trans Digital Corporation" TDC-37D0.DeviceDesc="Trans PC Card Universal Parallel Port" Socket="Socket Communications" Socket-0484.DeviceDesc="Socket PCMCIA Serial Adapter" Socket-12F8.DeviceDesc="Socket PCMCIA Serial Adapter" Socket-5E3E.DeviceDesc="Socket PCMCIA Serial Adapter" SocketDual.DeviceDesc="Socket PCMCIA Serial Device" Socket-FA29.DeviceDesc="Socket PCMCIA PageCard V3.0" Socket-AF8A.DeviceDesc="Socket PCMCIA GPS Adapter (Rev. B)" Socket-66D0.DeviceDesc="Socket PCMCIA GPS Adapter (Rev. C)" Socket-0104-0001.DeviceDesc="Socket PCMCIA Serial Adapter" DBC="DBC" DBC-4E9B.DeviceDesc="DBC SignalCard" Rockwell="Rockwell" Rockwell-64B7.DeviceDesc="Rockwell NavCard" Trimble="Trimble" Trimble-6947.DeviceDesc="Trimble PCMCIA GPS Adapter (Rev. B)" Smart="SMART Modular Technologies" Smart-A0F6.DeviceDesc="SMART Serial Port" SIIG="SIIG" SIIG-PCI_1_SERIAL.DeviceDesc ="SIIG CyberSerial Card" SIIG-PCI_1_PARALLEL.DeviceDesc ="SIIG CyberParallel PCI Card" SIIG-PCI_1_CYBERSERIAL.DeviceDesc ="SIIG CyberSerial Card" Parport.SVCDESC = "Parallel port driver" Serial.SVCDESC = "Serial port driver" Serenum.SVCDESC = "Serenum Filter Driver" Compaq = "Compaq GSM Radio Card" Ericsson= "Ericsson GC25" *ERIC.DeviceDesc = "Ericsson GC25" *COMP.DeviceDesc = "Compaq GSM Radio Card" Quatech = "Quatech" Quatech-63EA.DeviceDesc = "Quatech Q-Lynx Serial Adapter"