10 Saves energy by reducing your computer s performance where possible.
11 Power saver
12 Favors performance, but may use more energy.
13 High performance
14 Automatically balances performance with energy consumption on capable hardware.
15 Balanced
16 Power plan used when there are no users logged into the system.
17 System power plan
50 Do nothing
51 Do nothing
52 Sleep
53 Sleep
54 Hibernate
55 Hibernate
56 Shut down
57 Shut down
58 Do nothing
59 Do nothing
80 Seconds
81 %
100 The default Windows power plan types include Balanced, Power saver, and High performance. The three types are designed to balance power savings while providing performance on demand, maximize power savings, or maximize performance. Many system components use the power plan type to deciding whether to optimize power savings or performance.
101 Power plan type
102 Require a password to unlock the computer when it wakes from sleep.
103 Require a password on wakeup
104 Specify how long your computer is inactive before going to sleep.
105 Sleep after
106 Specify how long your computer is inactive before hibernating.
107 Hibernate after
108 Allow Windows to save your work and enter a low-power state so that you can resume working almost immediately.
109 Allow hybrid sleep
110 Enables system to show a progress bar during transitions to sleep.
111 Enable Sleep Progress Bar
114 On
115 On
116 Off
117 Off
118 No
119 Specify sleep settings.
120 Sleep
121 Allow Windows to use the standby states when sleeping your computer.
122 Allow Standby States
123 Yes
124 Allow Windows to automatically wake your computer from sleep on a timer for scheduled tasks and other programs.
125 Allow automatic wake from sleep
126 Specify how idle your computer must be before it can automatically go to sleep.
127 Required idleness to sleep
200 Configure notification and alarm settings for your battery.
201 Battery
202 Specify the action to take when the battery capacity reaches the critical level.
203 Critical battery action
204 Specify the action that your computer takes when battery capacity reaches the low level.
205 Low battery action
206 Third Low Battery Alarm Action
207 Third Low Battery Alarm Action
208 Fourth Low Battery Alarm Action
209 Fourth Low Battery Alarm Action
210 Flags and settings for first low battery alarm
211 First low-battery alarm flags
212 Specify whether a notification is shown when the battery capacity reaches the low level.
213 Low battery notification
214 Flags and settings for third low battery alarm
215 Third low-battery alarm flags
216 Flags and settings for fourth low battery alarm
217 Fourth low-battery alarm flags
218 Percentage of battery capacity remaining that initiates the critical battery action.
219 Critical battery level
220 Percentage of battery capacity remaining that initiates the low battery action.
221 Low battery level
222 Percent battery power remaining when third low-power action should be taken.
223 Third power trip point
224 Percent battery power remaining when fourth low-power action should be taken.
225 Fourth power trip point
250 Specify what your computer does when you close the lid and press the power buttons.
251 Power buttons and lid
252 Specify the action to take when you press the power button.
253 Power button action
254 Specify the action to take when you press the sleep button.
255 Sleep button action
256 Specify the action that your computer takes when you close the lid on your mobile PC.
257 Lid close action
258 Specify the action to take when you press the Start menu power button.
259 Start menu power button
300 Specify power management settings for your hard disk.
301 Hard disk
302 Specify how long your hard drive is inactive before the disk turns off.
303 Turn off hard disk after
304 Allow the system to adapt the harddisk power down timeout based on system usage and recent history.
305 Enable adaptive powerdown timeout.
306 The harddisk may reduce its speed after the specified time of inactivity is detected.
307 Harddisk lowspeed timeout.
308 Allow the system to adapt the harddisk lowspeed timeout based on system usage and recent history.
309 Adaptive lowspeed timeout
350 Specify power management settings for your computer s processor.
351 Processor power management
352 Processor performance settings which allow the system to lower processor performance (and power consumption) if the system is not doing any work.
353 Processor throttle setting.
354 Disable any processor power savings.
355 Disable
356 Lower the maximum frequency of the processor. Irregardless of the workload demands, the processor will run at a reduced frequency, thus drawing less power.
357 Lower maximum processor frequency
358 Adaptively lower the maximum processor frequency, based on remaining battery life. Irregardless of the workload demands, the processor will run at a reduced frequency, thus drawing less power.
359 Adaptively lower the maximum processor frequency.
360 Adaptively adjust the processor frequency based on workload demands. This setting will significantly reduce power consumption of the processor, while have very little effect on performance.
361 Adaptively adjust processor frequency.
362 Specify the maximum performance state of your processor (in percentage).
363 Maximum processor state
364 Specify the minimum performance state of your processor (in percentage).
365 Minimum processor state
366 Processor power CState settings
367 Processor power CState settings
368 Processor power PerfState settings
369 Processor power PerfState settings
400 Specify power management settings for your display.
401 Display
402 Specify how long your computer is inactive before your display turns off.
403 Turn off display after
404 Extends the time that Windows waits to turn off the display if you repeatedly turn on the display with the keyboard or mouse.
405 Adaptive display
500 Allow programs to prevent your computer from sleeping.
501 Allow programs to prevent sleep
502 Yes
503 Query applications and services
504 No
505 Do not query applications and services
510 Enable or disable passive cooling policy on the system.
511 Passive Cooling Mode
515 Specify the brightness level of your display.
516 Display brightness
517 Don't allow Windows to automatically wake your computer from sleep on a timer.
518 No
519 Allow Windows to automatically wake your computer from sleep on a timer.
520 Yes
550 Allow away mode to be enabled for your computer
551 Allow Away Mode Policy
552 Don't Allow away mode to be enabled
553 No
554 Allow away mode to be enabled
555 Yes
600 PCI Express Power Management Settings
601 PCI Express
602 Specifies the Active State Power Management (ASPM) policy to use for capable links when the link is idle.
603 Link State Power Management
604 Turn off ASPM for all links.
605 Off
606 Attempt to use the L0S state when link is idle.
607 Moderate power savings
608 Attempt to use the L1 state when the link is idle.
609 Maximum power savings
700 Allow processors to use throttle states in addition to performance states.
701 Allow Throttle States
702 Specifies the policy for devices powering down while the system is running.
703 Device idle policy
704 Favor performance over power savings.
705 Performance
706 Favor power savings over performance.
707 Power savings
708 Ignore a burst of disk activity up to the specified time when determining if the disk is idle.
709 Hard disk burst ignore time
710 Idle timeout before the system returns to a low power sleep state after waking unattended.
