COPYRIGHT (c) 1985 by Novell, Inc. All Rights Reserved.
Remote Console
Password:
Available Servers
Exit Remote Console?
A connection could not be established with the selected server.
RCONSOLE-4.10-7: The driver was unable to initialize IPX.
Available Screens
2400 Baud
3600 Baud
4800 Baud
7200 Baud
9600 Baud
Baud Rate
RCONSOLE-4.10-16: The utility was unable to close file %s
RCONSOLE-4.10-17: The utility was unable to open file %s
RCONSOLE-4.10-18: The utility was unable to read file %s
RCONSOLE-4.10-19: The utility was unable to write to file %s
RCONSOLE-4.10-20: An error occurred copying file %s
Installing system and public files
Copying files to SYS:%s
The upload of the file is complete.
Insert Disk "%s" In Drive A
RCONSOLE-4.10-25: The utility was unable to allocate memory.
Transfer Files To Server
End Remote Session With Server
Available Options
Resume Remote Session With Server (ESC)
Select A Screen To View
Copy System And Public Files
<Press CANCEL (F7) To Abort>
<Press ESCAPE To Continue>
The current screen is locked.
Source path on workstation
Target path on server
Source: %s
Target: %s
Copying files from workstation to server
RCONSOLE-4.10-41: The utility was unable to set the date and time for file %s.
Directory Scan
Enter directory to scan
Name Type Size Date Time
Com Port
Select com port
Select baud rate
Modem Initialization Command
Modem Dial Command
Modem Hangup Command
Location Phone Number
Asynchronous Options
Configuration
Connect To Remote Location
Current Modem Configuration
Location
Phone Number
Remote Server Information
Delete Entry
Modem Reset Command
Terminate Asynch Connection
RCONSOLE-4.10-64: The utility was unable to write the modem configuration file to the current directory.
Modem Result Codes
Dialing...
Press <ESC> to abort the call
RCONSOLE-4.10-68: An invalid user ID was specified in the configuration option.
User Connection ID
Reboot The File Server
Quit Remote Console Session
RCONSOLE-4.10-72: The utility was unable to establish a connection with %s
Initializing
Hanging Up...
RCONSOLE-4.10-76: Wild card specifiers are not allowed in the target path.
This option is not available while the console is locked.
RCONSOLE-4.10-78: The utility was unable to create the directory %s.
RCONSOLE-4.10-79: The utility was unable to find the file %s.
Script unsuccessful (%d)
The script command "%s" failed.
RCONSOLE-4.10-82: The specified server was not found.
Invoke Operating System Shell
RCONSOLE-4.10-84: The utility was unable to invoke the operating system (path = %s error = %d)
RCONSOLE-4.10-85: There is insufficient memory to invoke the operating system
Hayes Compatible Modem
Null Modem Cable
Communications Device
Select Device
RCONSOLE-4.10-90: The directory is empty or no matching file was found.
19200 Baud
The call back security feature has been enabled on server %s. The modem will be reset and the connection reestablished. Press <Esc> to abort.
Call Back Number
Modem Reconnect Command
RCONSOLE-4.10-95: An invalid call back number was specified in the configuration option.
38400 baud
Connection Type
Asynchronous
A:*.*
Copy 4.0 System and Public Files
%ld of %ld bytes transferred.
The file upload is now complete. Make sure that your RCONSOLE diskette is inserted in the floppy drive now.
Responding to open file request.
Workstation Address
RCONSOLE-4.10-107: The utility could not determine the workstation address.
RCONSOLE-4.10-108: The utility could not initialize SPX.
RCONSOLE-4.10-109: The utility could not open an IPX socket.
RCONSOLE-4.10-110: The utility could not locate a route to the designated server.
RCONSOLE-4.10-111: The SPXEstablishConnection table is full. The utility cannot establish a connection.
RCONSOLE-4.10-112: SPXEstablishConnection failed to establish a connection to the desired server.
RCONSOLE-4.10-113: The server connection was terminated by AllocateConnection.
RCONSOLE-4.10-114: No response has been received from the server.
RCONSOLE-4.10-115: The utility attempted to send a packet with an invalid size.
RCONSOLE-4.10-116: The server connection was terminated by SendRequest.
RCONSOLE-4.10-117: The server connection was terminated by SendRequestAndGetReply.
RCONSOLE-4.10-118: The utility was unable to send a request to the server.
Resend packet number %d
--------- Packet sent
--------- Packet received
RCONSOLE-4.10-124: The utility received more packets than it has buffers to hold. Data was lost.
RCONSOLE-4.10-125: No source file was specified.
RCONSOLE-4.10-126: No target path was specified.
RCONSOLE-4.10-127: The utility was unable to read the asynchronous I/O overlay.
RCONSOLE-4.10-128: The utility was unable to locate the asynchronous I/O overlay.
4.10.6
RCONSOLE-4.10-129: The asynchronous I/O overlay is the wrong version.
Command format: RCONSOLE [SERVER NAME TEMPLATE] (e.g. MYSERVER, MY*)
Note: The [SERVER NAME TEMPLATE] parameter is valid only for SPX connections.
This utility requires message file version %s.
A server could not be located.
RCONSOLE-4.10-17: The utility was unable to open the file %s. The path may be invalid, or nonexistent. Press <F1> for examples of valid paths.
Type EXIT to return to RCONSOLE
VeRsIoN=4.10.2
CoPyRiGhT=(c) Copyright 1994, Novell, Inc. All Rights Reserved.
<F1> Help (including hot key assignments)
<F1> Help
Abort file transfer?
Enter the IPX internal network number of the desired server
Number:
<INSERT> Select by address
%d servers were found, however due to memory constraints only %d will appear in the list. Use "RCONSOLE [NAME TEMPLATE]" to limit the list size.
Querying server %s for known remote servers.
GetAllKnownServers call failed to server %s. Ccode = %d, AllResponseData.completionCode = %u.
RCONSOLE-4.10-130: The utility was unable to unpack the file %s
RCONSOLE-4.10-131: The utility was unable to read the header of file %s
The target path must be a NetWare volume. DOS paths are not valid for file transfer.
Configure Keystroke Buffering
[ ] Manual keystroke send (ALT-F8 to send)
[ ] Keystroke delay (send when keyboard is idle)
Select a method of keystroke buffering
[ ] No keystroke buffering (normal mode)
Enter the keyboard idle time in milliseconds
Number of milliseconds:
[ ] On demand buffering (ALT-F9 to enter a buffered command)
Enter text to send to the server
Text:
The keystroke delay time may be between 0 and 50000 milliseconds.
Available Servers (from %s)
Warning: MS WINDOWS may cause RCONSOLE to behave erratically. If you experience problems you should exit MS WINDOWS before running RCONSOLE. Press <ESCAPE> to exit, or <ENTER> to continue.
Servers examined: %4d RCONSOLE capable: %4d
Note: The server code page %u, and the code page of this workstation %u, do not match. Some characters may not be displayed properly.
Note: The code page of this workstation cannot be determined. If the server code page, %u, differs from that of this workstation, some characters may be displayed incorrectly.
(.txt)