1502 Cleaning up install temporary files for S3 driver: %s.
1503 The shutdown phase of install has begun for S3 driver: %s
1504 Can't open Set File; no temporary Setup Archive files deleted (driver id: %s).
1505 Because the win.ini was modified by this install, the win.ini was flushed so the win.ini changes could take effect.
1506 The install temporary files were not deleted because the Set File could not be read (%s) .
1507 The phase 3 driver shutdown is ok (%s).
1510 Profile Path
1511 Please enter the path of the Admin Profile found on the Network Installation you would like to install to.
1512 &Profile Path
1513 OK
1514 Cancel
1515 &Browse...
1516 The reg key where the install setup files are stored (to be deleted by cleanup) could not be opened.
1517 For the shutdown phase of install, the set file could not be found, so cleanup of install temporary files did not complete and the OpenFile Case did not complete.
1518 The path of the setup.exe is neccessary for the restart that is required so that files that were open during install can be replaced. The setup.exe path could not be found.
1601 Exit Setup
1602 Are you sure you want to exit?
1603 The installation has not yet completed.\n\nIf you exit Setup now, the applications will not run properly.However, you can resume the installation later, and it will continue from this point.\n\nAre you sure you want to exit?
1604 Exiting Setup
1605 Setup did not install any program files or modify any system files.\n\nWhen you are ready to install, run this Setup program again.
1606 When you are ready to resume the installation, run this Setup program again.
1607 Component
1608 Path
1609 Space Required
1610 - %d of %d components will be installed
1611 No component is selected.\n\nClick a component in the list before you click Change Path.
1612 No component is selected.\n\nClick a component in the list before you click the Components button.
1613 This component is a vital part of your application. If you do not install this component, and it has not been previously installed, your application will not run correctly.\n\nAre you sure you want to deselect it?
1615 Corel InfoCentral 7 Setup
1616 Corel InfoCentral 7
1617 Corel InfoCentral 7
1618 Insufficient Disk Space
1619 MB free
1620 MB
1621 Compact Installation
1622 CD-ROM Installation
1623 Previous Component
1624 Previous Path
1625 Setup Type
1626 Component Name
1627 Filename
1628 Description
1629 This product has no Release Notes.
1630 No Release Notes are selected.\n\nClick a filename in the list before you click View.
1635 Corel office applications
1636 Preparing for Setup. Please wait...
1638 Installation Information
1639 No components are selected for installation. Are you sure you want to continue?
1644 Removable Drive
1645 Fixed Drive
1646 RAM Drive
1647 Network
1648 Local
1649 Run from CD or Network
1650 Required Shared Components are required programs and features that are used by multiple suite applications, such as the File Open dialog, the print processor, and more.
1651 Required Shared Components
1652 Optional Shared Components are optional programs and features that are used by multiple suite applications, such as Spell Checker, QuickFinder, and more.
1653 Optional Shared Components
1654 Folder Name Error
1655 Access denied to path: %s\n\nIt is likely that you don't have rights to this folder (or to create it, if it doesn't yet exist).
1656 The specified path is invalid: %s\n\nA pathname cannot contain any of the following characters: \ / : * ? < > |
1657 The specified path is invalid: %s
1658 Long filenames are not supported by the drive %s
1662 Folder: %s doesn't exist. Do you want to create it?
1663 Exit Remove Program
1664 Are you sure you want to exit?
1665 Exiting Remove Program
1666 The Remove program did not remove any program files or modify any system files.\n\nIf you want to remove Corel applications at a later time, run the Remove program again.
1667 Space Available
1668 Drive or UNC Path
1669 Notepad.exe, the Windows 95 text viewer, cannot be found.
1670 &Install program files to network location:
1671 &Install required workstation files to drive:
1672 Required Components are those features that are required for the program to run.
1673 Required Components
1674 This drive contains removable media.\n\nTo run correctly, your application will require the media to be in the drive.\n\nDo you want to continue?
1675 Select the shared Windows folder then click OK.
1676 This component will be removed because you are installing the same version of the component to a different path.
1677 This component will be removed because you are installing the same version of the component using a different setup type.
1678 This component will be removed because you are installing an older version of the component to the same path.
1679 Incomplete Setup
1680 Corel office applications main workstation path
1681 Certain required components will be removed because you can only have one copy on your system.
1682 Certain required shared components will be removed because you can only have one copy on your system.
1683 Certain optional shared components will be removed because you can only have one copy on your system.
1684 Installation from Network
1685 &Update current server installation on %s
1686 Some files may have been modified since installation. These files contain data that you have saved. Removing modified files will result in a loss of saved data.
1687 Compressed Drive
1688 removeus.hlp
1689 No applications are selected for removal. To continue, you must select an application.
1690 Remove Program Information
1691 Please ensure that you have READ and WRITE rights on\n\n%s\n\nYou will not be able to continue the installation on this server\nwithout these rights.
1692 Server Rights
1693 This component is a vital part of your application. You cannot deselect it unless you are doing a Custom installation.
1694 Marginal Disk Space
1695 Invalid UNC path, you must have a valid server and volume name
1699 You are now ready to install the workstation files to the following path:
1700 %s\ is not accessible. The device is not ready.
1704 Invalid Serial Number
1705 The serial number is not valid. Do you want to continue anyway?
2001 Fatal Error creating response file %s.
2002 Successful creation of response file %s.
2003 The User Interface is being initialized.
2004 The User Interface is finished.
2005 The user has exited from the User Interface.
2006 Error creating File Group %s in Module %s %s.
2007 Successful creation of File Group %s in Module %s %s.
2008 Error querying database for File Group %s in Module %s %s.
2009 User has selected File Group %s in Module %s %s.
2010 User has deselected File Group %s in Module %s %s.
2011 Error creating Location %s.
2012 Successful creation of Location %s.
2013 Error querying database for Location %s.
2014 Error creating Module %s %s.
2015 Successful creation of Module %s %s.
2016 Error querying database for Module %s %s.
2017 User has selected Module %s %s.
2018 User has deselected Module %s %s.
2019 Error creating Product %s %s.
2020 Successful creation of Product %s %s.
2021 Error querying database for Product %s %s.
2022 User has selected Product %s %s.
2023 User has deselected Product %s %s.
2024 Error creating Shipped File %s in Module %s %s, File Group %s.
2025 Successful creation of Shipped File %s in Module %s %s, File Group %s.
2026 Error querying database for Shipped File %s in Module %s %s, File Group %s.
2027 User has selected Shipped File %s in Module %s %s, File Group %s.
2028 User has deselected Shipped File %s in Module %s %s, File Group %s.
2029 Successful creation of Dependant File Group %s, Module %s %s, for File Group %s, Module %s %s.
2030 Error querying database for Dependant File Group %s, Module %s %s, for File Group %s, Module %s %s.
2031 Successful creation of Product Module %s %s, %s %s.
2105 Product: %s not removed from Installed Profile\nbased on Custom Code determination.
2106 Product removed from Installed Profile: %s
2107 Ending processing of Product: %s.
2108 Canceling processing of Product: %s.
2109 Product has been marked as installed: %s
2110 Product not installed: %s
2111 Product added to Installed Profile: %s
2112 Cannot create Location: %s. \n\nYou can resume the install after this is fixed.
2113 Location: %s\ncannot be written to.\n\nYou can resume the install after this is fixed.
2114 Location: %s\ndoes not exist.\n\nCannot continue the install.
2115 Location %s\n was created on your system.
2116 Deinstalling Module: %s.
2117 Migrating Settings from Module %s to Module %s.
2118 Ending processing of Module: %s.
2119 Canceling processing of Module: %s.
2120 Module not installed: %s %s
2121 Section/Item not found in RSP file: %s
2122 Cannot read from Installation Profile
2123 Invalid same Product scenario found
2124 Invalid older Product scenario found
2125 Invalid newer Product scenario found
2126 Corel Application Management Directory not in RSP
2131 Starting translator
2132 Product not found: %s
2133 Canceling install data
2134 Beginning Shipped File data: %s
2135 Shipped File added to Installed Profile: %s
2136 Not enough memory
2137 Ending translator
2151 Starting install
2152 Ending install
2153 SF netresident copy success: %s
2154 Unable to copy file: %s
2155 Cannot load decompressor: %s\n\nYou can resume the install once this file is available.
2156 Stopping Archive: %s
2157 Workstation file complete: %s
2158 Archive ready: %s
2159 Archive completed: %s
2160 Archive error: couldn't decompress %s.
2161 Disk Full. There are %sMBs left to copy. \n\nYou can resume the install once you've freed up\n\nenough disk space.
2162 Starting Shipped File: %s
2163 Shipped File Installed: %s
2164 Starting File Group: %s
2165 Ending File Group: %s
2166 The Location %s is different from a previous install. Installation cannot continue
2171 Ad Object Load Failed: %d
2172 Archive Object Load Failed: %s
2173 File Group Object Load Failed: %s
2174 Driver Object Load Failed: %s
2175 Shipped File Object Load Failed: %s
2176 Language Object Load Failed: %s
2177 Module Language Object Load Failed: %s
2180 %s not in the Shipping Profile: %s
2181 %s not in the Installation Profile: %s
2182 Cannot write the %s to the IP: %s
2183 Cannot write the %s to the SP: %s
2184 Archived file not in the SP: %s\n\nShipped file not installed
2185 Need a new disk
2186 Please insert %s.
2187 %s file attributes: %s
2188 not found
2189 read only
2190 normal
2191 open access denied
2192 Archive not found: %s
2193 Opening Archive: %s
2194 Updating the Installation Profile. Please wait...
2195 Component:
2196 Updating the Administration Profile. Please wait...
2197 Committing the Data to the Profile
2198 Updating Archive Data: %s
2199 All
2200 Ad
2201 Archive
2202 Archive Module Language
2203 Created File
2204 Driver
2205 Driver Ad
2208 ENV Entry
2209 File
2210 File Group
2211 File Group
2212 File Group Ad
2213 File Group Dependencies
2214 Icon Location
2215 INI Entry
2216 Installed Icon
2217 Installed Icon Location
2218 Interface Language
2219 Language
2220 Location
2221 Master Product
2222 Module Dependencies
2223 Module Location
2224 Module Language
2225 Module
2226 Module
2227 Module Settings Record
2228 Product
2229 Product Module
2230 Persistent Setting Entry
2231 REG Entry
2232 Shipped File
2233 Shipped File
2234 Shipped File Setting Record
2235 Shipping Media
2236 Storage Device
2237 System Settings Record
2238 Resource String
2240 the CD or select the \nNetwork Location for %s
2241 Archived File not found: %s
2250 File date unknown, Shipped File not installed: %s
2251 Disk File date the same or newer, Shipped File not installed: %s
2252 Disk File Version the same or newer, Shipped File not installed: %s
2253 Shipped File was not installed, File on disk is read-only: %s
2254 Required File was not installed, File on disk is read-only: %s
2255 Shipped File not installed, Insufficient rights to directory/file: %s
2256 Shipped File not installed: %s
2257 Shipped File not marked read-only: %s
2258 Application in use, Shipped File not installed: %s
2259 Error: Archive sequence number not found: %d.
2260 Archive
2261 Error: File cannot be copied onto itself: Shipped File not installed: %s
2262 Component is not available to be installed: %s
2263 Error: Copied file is corrupt: %s
2601 Starting to configure Module: %s %s.
2602 Invalid Data for constructing Shipped File: Module Name %s, Module Version %s, FileGroupName %s, File Name %s,File Language %s, in Module: %s %s.
2603 Error: The attempt to begin the MOSR query failed for Module %s %s.
2604 Error: null pointer returned for new System Setting Record: %s %s with SSR id %s and SSR type %d, for Module: %s %s.
2605 Invalid Data for constructing the System Setting Record %s %s for Module %s %s.
2606 A System Setting Record was not found for the Module System Setting Record %s %s with SSR id %s.
2607 The Module %s %s has been successfully put to the IP.
2608 Error: The attempt to put the Module %s %s to the IP failed.
2609 Starting to configure the Shipped File with Module Name %s, Module Version %s, File Group Name %s, FileName %s and File Language %s.
2610 Error in Shipped File: null pointer returned for new System Setting Record %s %s with SSR id %s and SSR type %d.
2611 Error in Shipped File: Data to construct the System Setting Record %s %s with id %s and of type %d was invalid.
2612 Error in Shipped File: System Setting Record not found for the Shipped File SSR %s %s with id %s.
2613 Error in Shipped File: null pointer returned from new C_II for installed icon with Module Name %s, Module Version %s, and id %d.
2614 The following Shipped File was successfully put to the IP: Module Name %s, Module Version %s, File Group Name %s, File Name %s, File Language %s.
2615 Error: The attempt to put the following Shipped File to the IP failed: Module Name %s, Module Version %s, File Group Name %s, File Name %s, File Language %s.
2616 There was an error reading the icon from the database for: Module %s %s, File Group %s, File Name %s, File Language %s.
2617 The Configuration Driver (ID: %s) loaded successfully from the Installation Profile.
2618 The Configuration Driver (ID: %s) could not be loaded from the Installation Profile.
2619 Configuration (Driver ID: %s) was completed successfully.
2620 Configuration (Driver ID: %s) was not completely successful.
2621 Configuration could not write Driver (ID: %s) to the Installation Profile.
2622 Module %s, version %s, could not be initialized for Configuration.
2623 Cannot continue with Configuration: Response File %s is invalid.
2624 Could not retrieve valid Installation Types from Response File %s.
2625 No Modules were found in Response File %s.
2626 Error: Cannot continue with Configuration. Insufficient memory for Response File %s.
2628 An invalid or missing Install Location Type occurred in Response File %s.
2629 System Setting Record ID %s, Module %s, Version %s, was initialized successfully.
2630 System Setting Record ID %s, Module %s, Version %s, was not initialized successfully.
2631 System Setting Record ID %s, Module %s, Version %s, was aborted.
2632 System Setting Record ID %s, Module %s, Version %s, was configured successfully.
2633 System Setting Record ID %s, Module %s, Version %s, was not configured successfully.
2634 System Setting Record ID %s, Module %s, Version %s, could not be written to the Installation Profile.
2635 Aborted installed icon for Module Name %s, Module Version %s, Icon ID %d.
2636 Created installed icon for Module Name %s, Module Version %s, Icon ID %d.
2637 Writing installed icon location for Module Name %s, Module Version %s, Icon ID %d, Icon Location %s.
2638 Error in Shipped File: Icon Location not found for Icon Location Name %s, Module Name %s, Module Version %s, Icon ID %d.
2639 Creating installed icon for Module Name %s, Module Version %s, Icon ID %d.
2640 Target file path not obtained for Module Name %s, Module Version %s, Icon ID %d.
2641 Icon file path not obtained for Module Name %s, Module Version %s, Icon ID %d.
2642 Could not get path for icon location: %s.
2643 OleInitialize Error: %s
2644 Configuration (Driver ID: %s) was canceled by the user.
2645 The files that could not be configured due to being open during initial install have been configured. Driver id: %s.
2646 Error parsing the icon Target Replacement attribute for Module (%s), Version(%s), IconID(%d).
2647 Ole was successfully initialized for configuration.
2648 CoCreateInstance failed: Cannot create instance of IShellLink interface.
2649 QueryInterface failed: Cannot get IPersistFile interface in IShellLink.
2650 The Installation Profile (a vital database file) could not be opened successfully.
2651 The Shipping Profile (a vital database file) could not be opened successfully.
2652 System Setting Record error: Couldn't load Created File object (%s, %s, %s) from Installation Profile.
2653 System Setting Record error: Couldn't load Location object (%s, %s) from Installation Profile.
2654 System Setting Record error: The following Environment File could not be opened: %s.
2655 System Setting Record error: Environment File switch %s, value %s, could not be written to file %s.
2656 System Setting Record error: Initialization File section %s, entry %s, value %s, could not be written to file %s.
2657 System Setting Record (ID %s, Module %s, Version %s) error: Could not create subkey. Error Code: %ld.
2658 System Setting Record (ID %s, Module %s, Version %s) error: Could not write value. Error Code: %ld.
2659 The merge of the shipped file %s FAILED due to a CreateProcess error.
2660 Due to a %s,the registry information for the file %s failed: Module %s, Version %s.
2661 A module could not be loaded for the self-reg file: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2662 The persistent setting SSR could not be created for: SSRID (%s) of Module (%s) Version (%s) with GetLastError (%d).
2663 The persistent setting SSR has invalid data: SSRID (%s) of Module (%s).
2664 The persistent setting SSR Value was not set to the registry: SSRID (%s) of Module (%s) Version (%s) with GetLastError (%d).
2665 Could not delete the following .gid file: %s. The Help indexes for this file will be incorrect until the .gid can be deleted! Module( %s ), Version( %s )
2666 Configuration Could not delete the following .gid file: FileName (%s), Module (%s), Version (%s). The computer may need to be restarted to get the correct Help indexes if the cleanup exe also cannot delete it.
2667 The CreateProcess() call for (%s /RegServer) failed: Module( %s ).
2668 The self-reg function failed for: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2669 The attempt to get the proc address for the self-reg function failed: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2670 The attempt to read to VERSIONINFO struct failed due to a memory error: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2671 The path for the self-reg file could not be verified: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2672 An error occurred when attempting to read the VERSIONINFO struct for: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2673 The self-reg code for the following function has not been implemented: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2674 For the following icon, there was not a corresponding Shipped File in the database: ModuleName(%s),ModuleVersion(%s),FileGroup Name(%s),ExeFile Name(%s),File Language(%s).
2675 System Setting Record ID %s, Module %s, Version %s, was not written to the registry so the existing value would not be overwritten.
2676 The AddFontResource api call failed for: Filename(%s), ModuleName(%s), ModuleVersion(%s), GetLastError(%d).
2677 The attempt to initialize the progress bar for the configuration dialog failed.
2678 Error parsing the icon Working Directory attribute for Module (%s), Version(%s), IconID(%d).
2679 Error parsing the icon Command Line Options attribute for Module (%s), Version(%s), IconID(%d).
2680 The attempt to open or create the Fonts registry key failed during the processing of: FileName(%s), ModuleName(%s), ModuleVersion(%s), ErrorReturned(%d).
2681 Some of the fonts you installed will be unavailable.\n\nThe fonts you selected have been copied to your hard disk. However, Setup could not register all of them because the Fonts key in the Windows Registry is full.\n\nTo make the fonts available that you want, use the Fonts folder in Windows' Control Panel to delete the fonts you don't want and to add the ones you do.
2682 The .ttf file could not be registered for: Filename(%s), ModuleName(%s), ModuleVersion(%s), ErrorReturn(%d).
2683 Too Many Fonts Installed
2684 The target replacement (the file the icon points to) is not installed: FileName(%s).
2685 The file this icon points to was not installed: TargetFileName(%s), ModuleName(%s), IconId(%d).
2686 The path or file does not exist so configuration will not be done on: PathAndFile(%s), FileName(%s), ModuleName(%s), ModuleVersion(%s).
3301 %s DLL Custom Notify Proc Not Found
3302 Custom DLL (%s) Not Found
3451 The IP was empty and deleted
3452 Deinstall completed
3453 Deleted driver %s from the IP
3454 Started deinstalling products
3455 Could not deinstall product %s version %s, was not in IP
3456 Starting removal of an INI entry
3457 Finished removal of an INI entry
3458 Remove Products
3459 Cannot access the IP file \nContinue?
3460 Starting to deinstall product %s version %s
3461 Finished deinstalling product %s version %s
3462 Starting to remove product %s version %s
3463 Module %s version %s is shared and will not be uninstalled.
3464 Starting removal of an ENV entry
3465 Finished removal of an ENV entry
3466 Starting to remove a registry entry
3467 Finished removing a registry entry
3468 Created File %s has been deinstalled
3469 Shipped File %s has been deinstalled
3470 Starting to remove module %s ver %s.
3471 Finished removing module %s ver %s.
3473 Shipped File Object Load Failed: %s
3474 Created File Object Load Failed: %s
3475 Starting to remove a CAR
3476 Finished removing a CAR
3477 Error: null pointer returned for new SSR: %s %s with SSR id %s and SSR type %d, for Module: %s %s.
3478 Invalid Data for constructing the SSR %s %s for Module %s %s.
3479 Couldn't instantiate a new CF
3480 CF is invalid
3481 Couldn't instantiate a new SF
3483 Couldn't instantiate a new CAR
3485 Couldn't instantiate a new LO
3487 Starting removal of an SSR
3488 Finished removal of an SSR
3489 Starting to remove a location
3490 Finished removal of a Location
3491 Started to remove a PE entry
3492 The removal of the PS reg entry is complete: SSRID(%s), ModuleName(%s), ModuleVersion(%s).
3493 Starting removal of an Icon Location
3494 A module could not be loaded for the self-reg file: FileName (%s) of Module (%s).
3495 Error: The attempt to begin the MOSR query failed for Module %s %s.
3496 An SSR was not found for the MOSR %s %s with SSR id %s.
3497 Corel Remove
3498 File %s was modified so it wasn't removed
3499 The CreateProcess() call for (%s /UnRegServer) failed: Module( %s ).
3500 The location for file (%s) of module (%s), version (%s), could not be obtained from the database.
3501 The Begin query by files failed for file (%s) of module (%s), version (%s).
3502 The Self-UnReg function failed for file (%s) of module (%s).
3503 The Proc Address for the self-registering file (%s) of module (%s) was not found.
3504 There was a memory error when processing the self-unreg code for file (%s) of module (%s).
3505 The path for the self-registering file (%s) of module (%s) could not be verified.
3506 There was an error when trying to access the VERSIONINFO for file (%s) of module (%s).
3507 The removal of the following SSR has been aborted: SSRID (%s), ModuleName (%s), ModuleVersion (%s).
3508 The attempt to instantiate an SSR for SF failed: Module(%s), ModuleVersion(%s), SSRID (%s), SSR type (%d).
3509 The data for the following SSR is invalid: Module(%s), ModuleVersion (%s), SSRID (%s), SSR type (%d).
3510 An SSR was not found for the given SFSR: ModuleName(%s), ModuleVersion(%s), SSRID(%s).
3511 Error Loading Self-UnReg Module for file (%s) of module (%s).
3512 The Created File object for this INI object could not be found in the database: ModuleName (%s), ModuleVersion (%s), FileName (%s).
3513 The location object for the Created File object could not be loaded: CF Location Name (%s), CF Location Version (%s).
3514 The write of the previous value for the INI object failed: INIsection (%s), INIentry (%s), INIvalue (%s), File Path (%s).
3515 Created File could not load the location object: FileName (%s), ModuleName (%s), ModuleVersion (%s).
3516 The Begin Query for matching Created File's failed: FileName (%s), ModuleName (%s), ModuleVersion (%s).
3517 The self-reg function has not been implemented: FileName (%s), ModuleName (%s), ModuleVersion (%s).
3518 The attempt to create the previous PS registry key failed: SSRID(%s), ModuleName(%s), ModuleVersion(%s).
3519 The PS registry key is invalid: SSRID(%s), ModuleName(%s), ModuleVersion(%s).
3520 The removal from the registry of the PS value failed: SSRID(%s), ModuleName(%s), ModuleVersion(%s).
3521 Deleted File Group %s from IP.
3522 Failed to delete File Group %s from IP.
3523 Location %s version %s is shared and will not be uninstalled.
3524 Failed to retrive %s record %s %s.
3525 Couldn't instantiate a new %s\n Continue?
3526 The attempt to get the location for the following Created File failed: ModuleName(%s), FileName(%s), Location(%s).
3527 The created file could not be opened for: ModuleName (%s), ModuleVersion (%s), FileName (%s).
3528 The registry key could not be removed: SSRID (%s), ModuleName (%s), ModuleVersion (%s), LastError (%d).
3529 The removal process of the RE is complete: SSRID (%s), ModuleName (%s), ModuleVersion (%s).
3530 The attempt to restore the previous RE value failed: SSRID (%s), ModuleName (%s), ModuleVersion (%s), LastError (%d).
3531 The attempt to delete the PS entry from the reg failed: SSRID (%s), ModuleName (%s), ModuleVersion (%s).
3532 The attempt to open the PE key failed: SSRID (%s), ModuleName (%s), ModuleVersion (%s), LastError (%d).
3533 The attempt to write the previous PE value to the registry failed: SSRID (%s), ModuleName (%s), ModuleVersion (%s), LastError (%d).
3534 The attempt to delete the EE from the OS failed: SSRID (%s), ModuleName (%s), ModuleVersion (%s), LastError (%d).
3535 The removal process of the EE is complete: SSRID (%s), ModuleName (%s), ModuleVersion (%s).
3536 The attempt to write the previous EE failed: ModuleName (%s), ModuleVersion (%s), EnvSwitch (%s), EnvFileName(%s).
3537 Marking applications to remove.
3538 Removing configuration data.
3539 Removing application files and folders.
3540 The ILT for ModuleName (%s) is undefined or NAM_ILT_UNKNOWN. Created File (%s) not removed.
3541 The dependent module was not found in the ip: ModuleName(%s), ModuleVersion(%s), RequiredModule(%s), RequiredModVersion(%s).
3731 11/04/1994
3751 Desktop Application Director (Quick)
3752 Envoy 7 (Envoy7)
3753 InfoCentral 7 (Wpic)
3754 Novell GroupWise (Ofwinfil)
3755 Paradox 7 (Pdxwin32)
3756 PerfectScript 7 (Ps70)
3757 Presentations 7 (Prwin70)
3758 Quattro Pro 7 (Qpw)
3759 WordPerfect 7 (Wpwin7)
3760 Silent installation could not continue because the following applications were running:
3761 PerfectPrint Process 7 (Pfppop70)
3762 Novell Notify (Ntwin)
3763 The Beta 3 version of Corel WordPerfect Suite 7 is installed on your system.\n\nYou must remove Beta 3 before you can install the released version.\n\nTo remove Beta 3, run Cleanpo7.exe from the SDK\Clean folder on your Beta 3 CD-ROM.
