PC World Komputer 1996 February

home *** CD-ROM | disk | FTP | other *** search

/ PC World Komputer 1996 February / PCWK0296.iso / sharewar / dos / program / interupt / interrup.m < prev next >

Wrap

Text File | 1995-08-13 | 187.0 KB | 4,729 lines

Interrupt List, part 13 of 13 This compilation is Copyright (c) 1989,1990,1991,1992,1993,1994,1995 Ralf Brown ----------80--------------------------------- INT 80 - Q-PRO4 - ??? --------r-80--------------------------------- INT 80 - reserved for BASIC Note: this vector and INT 81 through INT ED are modified but not restored by Direct Access v4.0, and may be left dangling by other programs written with the same version of compiled BASIC SeeAlso: INT 81"BASIC",INT 86"BASIC",INT EF"BASIC" --------E-80--------------------------------- INT 80 - Phar Lap 386|DOS-Extender - RELOCATED PRINT-SCREEN Note: the extender relocates INT 05 to here by default, but can be told to leave INT 05 alone with the commandline (or DOSX= environment variable) flag -PRIVEC 5 SeeAlso: INT 05 --------d-80--------------------------------- INT 80 - BusLogic BT-946C PCI SCSI Adapter - SCRATCHPAD RAM (NOT A VECTOR!) Note: the factory-default location for the eight bytes of scratchpad RAM needed by the SCSI adapter is 0000h:0200h, which is interrupt vectors 80h and 81h SeeAlso: INT 81"BusLogic" --------s-80----BL00------------------------- INT 80 - SBSIM - "STARTSND" - START SOUND ON SPECIFIED DRIVER BL = 00h BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI) Return: AX = initialization result (see #2555) Program: SBSIM is Creative Labs' SoundBlaster Simplified Interface Module, which provides access to multiple drivers for the SoundBlaster board through a single interface Range: INT 80h to INT BFh, selected automatically Note: the SBSIM installation check consists of testing for the signature "SBSIM" at offset 103h in the interrupt handler's segment. SeeAlso: INT 80/BL=01h"SBSIM",INT 80/BL=02h"SBSIM",INT 80/BL=03h"SBSIM" SeeAlso: INT 80/BX=0000h"SBSIM" (Table 2555) Values for SBSIM error code: 01h busy--currently in use 02h bad driver specified 03h invalid function 04h voice process already active 05h couldn't start CT-VOICE 06h couldn't start CTVDSK 07h invalid SBSIM handle 08h buffer not initialized yet 09h bad filename 0Ah bad file handle 0Bh driver not started yet 0Ch XMS driver not installed 0Dh no free SBSIM handles 0Eh bad file type 0Fh couldn't free XMS block 10h invalid source selected 11h get pan position failed 12h set pan position failed 13h set volume failed 14h couldn't start fade/pan 15h couldn't stop fade/pan 16h couldn't pause fade/pan 17h not a fade/pan operation 18h bad mode for fade/pan 19h couldn't start fade/pan 1Ah source not fading/panning 1Bh FM or MIDI already playing 1Ch bad MIDI mapper format --------s-80----BL01------------------------- INT 80 - SBSIM - "PLAYSND" - PLAY MUSIC/VOICE ON SELECTED DRIVER BL = 01h BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI) Return: AX = result (see #2555) SeeAlso: INT 80/BL=00h"SBSIM",INT 80/BL=02h"SBSIM",INT 80/BL=04h"SBSIM" --------s-80----BL02------------------------- INT 80 - SBSIM - "STOPSND" - STOP MUSIC/VOICE ON SELECTED DRIVER BL = 02h BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI) Return: nothing SeeAlso: INT 80/BL=00h"SBSIM",INT 80/BL=01h"SBSIM",INT 80/BL=03h"SBSIM" --------s-80----BL03------------------------- INT 80 - SBSIM - "PAUSESND" - TEMPORARILY PAUSE PLAYBACK ON SELECTED DRIVER BL = 03h BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI) Return: nothing SeeAlso: INT 80/BL=00h"SBSIM",INT 80/BL=02h"SBSIM",INT 80/BL=04h"SBSIM" SeeAlso: INT 80/BL=05h --------s-80----BL04------------------------- INT 80 - SBSIM - "RESUMESND" - RESTART PLAYBACK ON SELECTED DRIVER BL = 04h BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI) Return: nothing SeeAlso: INT 80/BL=00h"SBSIM",INT 80/BL=03h"SBSIM",INT 80/BL=05h"SBSIM" --------s-80----BL05------------------------- INT 80 - SBSIM - "GETSNDSTAT" - GET DRIVER'S STATUS BL = 05h BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI) Return: AX = status SeeAlso: INT 80/BL=00h"SBSIM",INT 80/BL=01h"SBSIM",INT 80/BL=03h"SBSIM" --------s-80----BX0000----------------------- INT 80 - SoundBlaster SBFM driver - GET VERSION BX = 0000h Return: ??? Note: SBFM installs at a free interrupt in the range 80h through BFh SeeAlso: BX=0008h"SBFM",INT 2F/AX=FBFBh --------s-80----BX0000----------------------- INT 80 - SBSIM - "QUERYVERSION" - GET VERSION BX = 0000h Return: AX = version (AH = major, AL = minor) Program: SBSIM is Creative Labs' SoundBlaster Simplified Interface Module, which provides access to multiple drivers for the SoundBlaster board through a single interface Range: INT 80h to INT BFh, selected automatically Note: the SBSIM installation check consists of testing for the signature "SBSIM" at offset 103h in the interrupt handler's segment. SeeAlso: BX=0001h"SBSIM",BX=0005h"SBSIM",INT 21/AX=4402h"CTMMSYS" SeeAlso: INT 80/BL=00h"SBSIM" Index: installation check;SBSIM|installation check;SoundBlaster --------s-80----BX0001----------------------- INT 80 - SoundBlaster SBFM driver - SET MUSIC STATUS BYTE ADDRESS BX = 0001h DX:AX -> music status byte SeeAlso: BX=0000h"SBFM",BX=0002h"SBFM",BX=0003h"SBFM" --------s-80----BX0001----------------------- INT 80 - SBSIM - "QUERYDRIVERS" - CHECK DRIVERS INSTALLED BX = 0001h Return: AX = bit flags for loaded drivers (see #2556) SeeAlso: BX=0000h"SBSIM",BX=0002h"SBSIM",BX=0005h"SBSIM",INT 80/BL=00h"SBSIM" Bitfields for SBSIM loaded drivers: Bit(s) Description (Table 2556) 0 FM 1 double disk-buffered voice driver (DDBV) 2 memory voice driver 3 auxiliary driver (mixer) 4 MIDI --------s-80----BX0002----------------------- INT 80 - SoundBlaster SBFM driver - SET INSTRUMENT TABLE BX = 0002h CX = number of instruments DX:AX -> instrument table SeeAlso: BX=0000h"SBFM",BX=0001h"SBFM",BX=0005h"SBFM" --------s-80----BX0002----------------------- INT 80 - SBSIM - GETADDRESS" - GET SELECTED DRIVER'S ENTRY POINT BX = 0002h AX = driver (00h = FM,01h = DDBV,02h = memvoice,03h = mixer,04h = MIDI) Return: CF clear if successful DX:AX -> entry point CF set on error SeeAlso: BX=0000h"SBSIM",BX=0001h"SBSIM",BX=0005h"SBSIM",INT 80/BL=00h"SBSIM" --------s-80----BX0003----------------------- INT 80 - SoundBlaster SBFM driver - SET SYSTEM CLOCK RATE BX = 0003h AX = clock rate divisor (1193180 / desired frequency in Hertz) FFFFh to restore to 18.2 Hz SeeAlso: BX=0000h"SBFM",BX=0001h"SBFM",BX=0004h"SBFM" --------s-80----BX0004----------------------- INT 80 - SoundBlaster SBFM driver - SET DRIVER CLOCK RATE BX = 0004h AX = driver clock rate divisor (1193180 / frequency in Hertz) Note: default frequency is 96 Hz SeeAlso: BX=0000h"SBFM",BX=0003h"SBFM" --------s-80----BX0005----------------------- INT 80 - SoundBlaster SBFM driver - TRANSPOSE MUSIC BX = 0005h AX = semi-tone offset SeeAlso: BX=0000h"SBFM",BX=0002h"SBFM",BX=0006h"SBFM" --------s-80----BX0005----------------------- INT 80 - SBSIM - "GETBUFFERINFO" - GET DRIVER'S BUFFER ADDRESS BX = 0005h AX = driver (00h = FM, 01h = DDB Voice, 04h = MIDI) Return: CF clear if successful DX:AX -> buffer CX = buffer size in K CF set on error Program: SBSIM is Creative Labs' SoundBlaster Simplified Interface Module, which provides access to multiple drivers for the SoundBlaster board through a single interface Range: INT 80h to INT BFh, selected automatically Note: the SBSIM installation check consists of testing for the signature "SBSIM" at offset 103h in the interrupt handler's segment. SeeAlso: BX=0000h"SBSIM",BX=0001h"SBSIM",BX=0002h"SBSIM",INT 80/BL=00h"SBSIM" --------s-80----BX0006----------------------- INT 80 - SoundBlaster SBFM driver - PLAY MUSIC BX = 0006h DX:AX -> music block Return: AX = status 0000h successful 0001h music already active SeeAlso: BX=0000h"SBFM",BX=0007h"SBFM",BX=000Ah"SBFM",INT 1A/AX=FF04h --------s-80----BX0007----------------------- INT 80 - SoundBlaster SBFM driver - STOP MUSIC BX = 0007h Return: AX = status 0000h successful 0001h music not active SeeAlso: BX=0000h"SBFM",BX=0006h"SBFM",BX=0009h"SBFM",INT 1A/AX=FF05h --------s-80----BX0008----------------------- INT 80 - SoundBlaster SBFM driver - RESET DRIVER BX = 0008h Return: AX = status 0000h successful 0001h music is active SeeAlso: BX=0000h"SBFM" --------s-80----BX0009----------------------- INT 80 - SoundBlaster SBFM driver - PAUSE MUSIC BX = 0009h Return: AX = status 0000h successful 0001h no music active SeeAlso: BX=0000h"SBFM",BX=0007h"SBFM",BX=000Ah"SBFM",INT 1A/AX=FF01h --------s-80----BX000A----------------------- INT 80 - SoundBlaster SBFM driver - RESUME MUSIC BX = 000Ah Return: AX = status 0000h successful 0001h no music paused SeeAlso: BX=0000h"SBFM",BX=0006h"SBFM",BX=0009h"SBFM" --------s-80----BX000B----------------------- INT 80 - SoundBlaster SBFM driver - SET USER-DEF TRAP FOR SYSTEM-EXCLUSIVE CMDS BX = 000Bh DX:AX -> trap routine SeeAlso: BX=0000h"SBFM" --------s-80----BX0400----------------------- INT 80 - SBSIM - "GETVOLUME" - GET SOURCE'S VOLUME BX = 0400h AX = sound source (see #2557) Return: CF clear if successful AX = volume CF set on error AX = error code (see #2555 at INT 80/BL=00h) SeeAlso: BX=0401h"SBSIM" (Table 2557) Values for SBSIM sound source: 00h master volume 01h voice 02h FM 03h CD 04h line in 05h microphone --------s-80----BX0401----------------------- INT 80 - SBSIM - "SETVOLUME" - SET SOURCE'S VOLUME BX = 0401h AX = sound source (see #2557) DX = new volume Return: AX = result (0000h = success) (see also INT 80/BL=00h) SeeAlso: BX=0400h"SBSIM" --------N-8001------------------------------- INT 80 - QPC Software PKTINT.COM - INITIALIZE AH = 01h Return: AX = 0000h CX = FFFFh DX = FFFFh Notes: this interrupt is the WinQVTNet protected mode interface to Windows 3.0 all buffer pointers are reset back to 0 --------N-8002------------------------------- INT 80 - QPC Software PKTINT.COM - GET BUFFER ADDRESSES AH = 02h BX = extra bytes to allocate per packet Return: AX = segment address of 10K buffer (for receives???) BX = segment address of 2K buffer (for sends???) SeeAlso: AH=05h --------N-8003------------------------------- INT 80 - QPC Software PKTINT.COM - GET ENTRY POINT AH = 03h Return: CX:DX -> receive call address Note: the returned address can be used in the packet driver calls since it will be a valid address in all DOS boxes SeeAlso: AH=06h --------N-8004------------------------------- INT 80 - QPC Software PKTINT.COM - ENABLE??? AH = 04h BX = ??? Return: ??? SeeAlso: AH=01h --------N-8005------------------------------- INT 80 - QPC Software PKTINT.COM - GET RECEIVE STATISTICS AH = 05h Return: AX = amount of buffer currently in use BX = current offset in buffer CX = number of times receive has been called SeeAlso: AH=02h --------N-8006------------------------------- INT 80 - QPC Software PKTINT.COM - REMOVE RECEIVED PACKET AH = 06h Return: BX = next packet offset CX = number of bytes still buffered DX = size of packet released back into buffer pool SeeAlso: AH=03h --------r-81--------------------------------- INT 81 - reserved for BASIC Note: this vector is modified but not restored by Direct Access v4.0, and may be left dangling by other programs written with the same version of compiled BASIC SeeAlso: INT 80"BASIC",INT 82"BASIC" --------N-81--------------------------------- INT 81 - IBM TOKEN RING ADAPTER - ??? SeeAlso: INT 82"TOKEN RING",INT 91"TOKEN RING" --------d-81--------------------------------- INT 81 - BusLogic BT-946C PCI SCSI Adapter - SCRATCHPAD RAM (NOT A VECTOR!) Note: the factory-default location for the eight bytes of scratchpad RAM needed by the SCSI adapter is 0000h:0200h, which is interrupt vectors 80h and 81h SeeAlso: INT 80"BusLogic" --------b-81--------------------------------- INT 81 - AMI WinBIOS - SECOND HARD DRIVE AUTODETECTION Notes: used by WinBIOS with core version of July 1994 or later QEMM 7.5 began using this interrupt internally after the QPAT3 maintenance release when searching for "ROM holes", causing a lengthy delay during bootup. Adding the QEMM parameter RH:N will avoid the QEMM call to INT 81 and speed up the boot process --------s-810200--------------------------- INT 81 - Gravis UltraSound - MegaEm - PROCESS COMMAND LINE AX = 0200h BX = PSP segment SI = ??? (data area) Return: AX = status (see #2558) BL = emulation state bit 1 Emulation is on bit 2 Emulation is off Program: MegaEm is a protected-mode SoundBlaster, SoundCanvas, and MT-32 emulator for the Gravis UltraSound Range: INT ??? to INT ??? (see INT 21/AX=FD12h) SeeAlso: AX=0202h,AX=0300h,AX=0400h,INT 21/AX=FD12h/BX=3457h (Table 2558) Values for MegaEm status: 0000h successful 0001h invalid command line optie 0002h display options 0003h ??? 0004h invalid number of voices specified 0005h could not load enough patches to provide acceptable emulation 0006h to many warnings on patch loading 0007h ??? (not used anymore) 0008h /CO and SCSI don't work together 0009h invalid music volume 000Ah invalid master volume 000Bh /SC switch is no longer valid 0100h ??? (some error on patch loading) --------s-810202--------------------------- INT 81 - Gravis UltraSound - MegaEm - ??? AX = 0202h Return: AX = ??? SeeAlso: AX=0200h,AX=0300h,AX=0400h,INT 21/AX=FD12h/BX=3457h --------s-810300--------------------------- INT 81 - Gravis UltraSound - MegaEm - LOAD SAMPLE ??? AX = 0300h Return: AX = ??? SeeAlso: AX=0200h,AX=0202h,AX=0400h,INT 21/AX=FD12h/BX=3457h --------s-810400--------------------------- INT 81 - Gravis UltraSound - MegaEm - ??? AX = 0400h BX = ??? (segment) Return: AX = ??? BX = ??? Program: MegaEm is a protected-mode SoundBlaster, SoundCanvas, and MT-32 emulator for the Gravis UltraSound SeeAlso: AX=0200h,AX=0202h,AX=0300h,INT 21/AX=FD12h/BX=3457h --------s-812010------------------------ INT 81 - Gravis UltraSound - MEGA_EM v3.0+ - ??? AX = 2010h ??? Return: ??? --------s-812011------------------------ INT 81 - Gravis UltraSound - MEGA_EM v3.0+ - ??? AX = 2011h ??? Return: ??? --------s-812012------------------------ INT 81 - Gravis UltraSound - MEGA_EM v3.0+ - ??? AX = 2012h ??? Return: ??? --------s-812015------------------------ INT 81 - Gravis UltraSound - MEGA_EM v3.0+ - ??? AX = 2015h ??? Return: ??? --------r-82--------------------------------- INT 82 - reserved for BASIC SeeAlso: INT 81"BASIC",INT 83"BASIC" --------N-82--------------------------------- INT 82 - IBM TOKEN RING ADAPTER - ??? AH = function 00h display message??? DS:BX -> string ??? Return: ??? SeeAlso: INT 81"TOKEN RING",INT 91"TOKEN RING" --------r-83--------------------------------- INT 83 - reserved for BASIC SeeAlso: INT 82"BASIC",INT 84"BASIC" --------s-8300------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 00h ??? Return: CF clear (successful) AX = ??? (0302h) Program: JM Pro Tracker is a public-domain resident .MOD (digital music) player by Josha Munnik (Table 2559) Values for JM Pro Tracker error code: 000Ah ??? 000Bh ??? 0014h ??? 001Eh some required parameters have not yet been set 001Fh already playing??? FExxh busy (API call already in progress) FFxxh invalid function number --------s-8301------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 01h DX = ??? or FFFFh ??? Return: CF clear if successful CF set on error AX = error code (see #2559) --------s-8302------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 02h BX = ??? ??? Return: CF clear if successful AX = ??? BX = ??? CX = ??? DX = ??? SI = ??? CF set on error AX = error code (000Ah,000Bh,other) (see #2559) --------s-8303------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 03h BX = ??? (only low four bits, must be nonzero) CX = ??? ??? Return: CF clear if successful CF set on error AX = error code (0014h) (see #2559) --------s-8304------------------------------- INT 83 - JM Pro Tracker v5.0 - SET DMA BUFFER??? AH = 04h CX = number of bytes in suggested buffer ES:DI -> suggested buffer for DMA transfers??? Return: CF clear if successful ES:AX -> actual buffer (filled with bytes of 80h) CX = actual length (multiple of 4) CF set on error AX = error code (see #2559) Note: the buffer must not cross a 64K DMA page boundary --------s-8305------------------------------- INT 83 - JM Pro Tracker v5.0 - SET ??? BUFFER AH = 05h CX = length of buffer ES:DI -> buffer for/containing ??? Return: CF clear (successful) SeeAlso: AH=06h,AH=07h,AH=18h --------s-8306------------------------------- INT 83 - JM Pro Tracker v5.0 - SET ??? BUFFER AH = 06h CX = length of buffer ES:DI -> buffer for/containing ??? Return: CF clear (successful) SeeAlso: AH=05h,AH=07h,AH=18h --------s-8307------------------------------- INT 83 - JM Pro Tracker v5.0 - SET ??? BUFFER AH = 07h BX = ??? CX = length of buffer ES:DI -> buffer for/containing ??? Return: CF clear (successful) SeeAlso: AH=05h,AH=06h,AH=18h --------s-8308------------------------------- INT 83 - JM Pro Tracker v5.0 - START PLAYING??? AH = 08h ??? Return: CF clear if successful ??? CF set on error AX = error code (001Eh,001Fh) (see #2559) SeeAlso: AH=09h,AH=0Ah --------s-8309------------------------------- INT 83 - JM Pro Tracker v5.0 - PAUSE??? AH = 09h ??? Return: CF clear if successful CF set on error AX = error code (see #2559) SeeAlso: AH=08h,AH=0Ah --------s-830A------------------------------- INT 83 - JM Pro Tracker v5.0 - RESUME??? AH = 0Ah ??? Return: CF clear if successful CF set on error AX = error code (001Fh) (see #2559) SeeAlso: AH=08h,AH=09h --------s-830B------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 0Bh BX = ??? ??? Return: CF clear if successful CF set on error --------s-830C------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 0Ch DX bit 5 = ??? ??? Return: CF clear if successful BX = ??? (FFFFh) CX = ??? (0000h) DX = ??? CF set on error AX = error code (see #2559) --------s-830D------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 0Dh BX = ??? ??? Return: CF clear (successful) --------s-830E------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 0Eh BX = ??? (ignored if ES:DI = 0000h:0000h) ES:DI -> ??? or 0000h:0000h Return: CF clear (successful) --------s-830F------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 0Fh ??? Return: CF clear if successful AX = ??? CF set on error AX = error code (see #2559) --------s-8310------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 10h BL = subfunction??? CX = ??? DX = ??? ??? Return: CF clear if successful CX = DX = ??? CF set on error AX = error code (see #2559) SeeAlso: AH=18h --------s-8311------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 11h BL = ??? CX = ??? Return: CF clear (successful) --------s-8312------------------------------- INT 83 - JM Pro Tracker v5.0 - CLEAR ??? AH = 12h Return: nothing --------s-8313------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 13h BX = ??? Return: CF clear (successful) --------s-8314------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 14h ??? Return: CF clear (successful) BX = ??? --------s-8315------------------------------- INT 83 - JM Pro Tracker v5.0 - GET ??? AH = 15h BX = what to get (zero/nonzero) Return: CF clear if successful BX = ??? DX = ??? CF set on error AX = error code (see #2559) --------s-8316------------------------------- INT 83 - JM Pro Tracker v5.0 - ??? AH = 16h AL = subfunction 00h ??? Return: BX = ??? CX = ??? DX = ??? ES:DI -> ??? CF indicates ??? 01h ??? Return: BX = ??? CX = ??? DX = ??? Return: CF clear if successful CF set on error AX = error code (FFxxh) (see #2559) --------s-8317------------------------------- INT 83 - JM Pro Tracker v5.0 - UNHOOK API INTERRUPT AH = 17h Return: CF clear if successful CF set on error (hooked by another program) --------s-8318------------------------------- INT 83 - JM Pro Tracker v5.0 - SET BUFFERS AH = 18h ES:DI -> buffer-pointer structure (see #2560) Return: nothing SeeAlso: AH=05h,AH=06h,AH=07h,AH=10h Format of JM Pro Tracker buffer-pointer structure: Offset Size Description (Table 2560) 00h WORD length of ??? buffer (see AH=05h) 02h DWORD -> ??? buffer (see AH=05h) 06h WORD length of ??? buffer (see AH=06h) 08h DWORD -> ??? buffer (see AH=06h) 0Ch WORD length of ??? buffer (see AH=07h) 0Eh DWORD -> ??? buffer (see AH=07h) 12h WORD ??? (see AH=07h) 14h WORD ??? (see AH=10h) (subfunction 01h) 16h WORD ??? (see AH=10h) (subfunction 01h) 18h WORD ??? (see AH=10h) (subfunction 00h) 1Ah WORD ??? (see AH=10h) (subfunction 01h) --------r-84--------------------------------- INT 84 - reserved for BASIC SeeAlso: INT 83"BASIC",INT 85"BASIC" --------r-85--------------------------------- INT 85 - reserved for BASIC Note: INT 80 through INT ED are modified but not restored by Direct Access v4.0, and may be left dangling by other programs written with the same version of compiled BASIC SeeAlso: INT 84"BASIC",INT 86"BASIC" --------N-86--------------------------------- INT 86 - NetBIOS - ORIGINAL INT 18 Note: some implementations of NetBIOS reportedly relocate INT 18 here SeeAlso: INT 18 --------r-86--------------------------------- INT 86 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 85"BASIC",INT 87"BASIC" --------r-86--------------------------------- INT 86 - APL*PLUS/PC - Terminate APL session and return to DOS SeeAlso: INT 21/AH=4Ch,INT 87"APL" --------r-87--------------------------------- INT 87 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 86"BASIC",INT 88"BASIC" --------r-87--------------------------------- INT 87 - APL*PLUS/PC - ??? SeeAlso: INT 86"APL",INT 88/AL=00h --------v-87--------------------------------- INT 87 - VIRUS - "ZeroHunt" - VIRAL CODE (NOT A VECTOR!) Note: the ZeroHunt virus copies its resident code down to 0000h:021Ch and following SeeAlso: INT 8B"VIRUS" --------r-88--------------------------------- INT 88 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 87"BASIC",INT 89"BASIC" --------r-88--00----------------------------- INT 88 - APL*PLUS/PC - CREATE OBJECT OF ARBITRARY RANK OR SHAPE AL = 00h BX = STPTR of the variable to be assigned ES:SI -> model of type, rank, and shape (see #2561) Return: ES:DI -> first data byte of object DX:CX = number of elements in the object SeeAlso: INT C8"APL" Format of APL*PLUS/PC shape model: Offset Size Description (Table 2561) 00h BYTE type 01h character (2-byte dimension sizes) 02h integer (2-byte dimension sizes) 08h floating point (2-byte dimension sizes) 11h character (4-byte dimension sizes) 12h integer (4-byte dimension sizes) 18h floating point (4-byte dimension sizes) 01h BYTE rank 02h (D)WORD first dimension of shape N (D)WORD second dimension of shape ... --------r-88--01----------------------------- INT 88 - APL*PLUS/PC - CREATE CHARACTER SCALAR/VECTOR/MATRIX <64K IN SIZE AL = 01h AH = rank BX = STPTR of the variable to be assigned CX = first dimension (if any) DX = second dimension (if any) Return: ES:DI -> object CX = number of elements in the object Note: each dimension must be 32767 or smaller SeeAlso: AL=02h,AL=08h,INT C8"APL" --------r-88--02----------------------------- INT 88 - APL*PLUS/PC - CREATE INTEGER SCALAR/VECTOR/MATRIX <64K IN SIZE AL = 02h AH = rank BX = STPTR of the variable to be assigned CX = first dimension (if any) DX = second dimension (if any) Return: ES:DI -> object CX = number of elements in the object Note: each dimension must be 32767 or smaller SeeAlso: AL=01h,AL=08h,INT C8"APL" --------r-88--08----------------------------- INT 88 - APL*PLUS/PC - CREATE FLOATING POINT SCALAR/VECTOR/MATRIX <64K IN SIZE AL = 08h AH = rank BX = STPTR of the variable to be assigned CX = first dimension (if any) DX = second dimension (if any) Return: ES:DI -> object CX = number of elements in the object Note: each dimension must be 32767 or smaller SeeAlso: AL=01h,AL=02h,INT C8"APL" --------r-88--F5----------------------------- INT 88 - APL*PLUS/PC - FORCE OBJECT INTO REAL WORKSPACE FROM VIRTUAL AL = F5h BX = STPTR of object SeeAlso: INT C8"APL" --------r-88--F6----------------------------- INT 88 - APL*PLUS/PC - MAKE NAME IMMUNE FROM OUTSWAPPING AL = F6h BX = STPTR of object SeeAlso: AL=F7h,AL=F8h,INT C8"APL" --------r-88--F7----------------------------- INT 88 - APL*PLUS/PC - MAKE NAME ELIGIBLE FOR OUTSWAPPING AL = F7h BX = STPTR of object SeeAlso: AL=F6h,AL=F8h,INT C8"APL" --------r-88--F8----------------------------- INT 88 - APL*PLUS/PC - REPORT WHETHER NAME IS ELIGIBLE FOR OUTSWAPPING AL = F8h BX = STPTR of object Return: BX = name's outswapping status 0000h eligible 0001h not eligible SeeAlso: AL=F6h,AL=F7h,INT C8"APL" --------r-88--F9----------------------------- INT 88 - APL*PLUS/PC - DETERMINE NAME STATUS AL = F9h ES:SI -> name CX = length of name Return: CF set if name ill-formed or already in use BX = STPTR if already in symbol table CF clear if name is available for use BX = 0000h Note: does not force the name into the workspace SeeAlso: AL=FEh,AL=FFh,INT C8"APL" --------r-88--FC----------------------------- INT 88 - APL*PLUS/PC - DETERMINE IF MEMORY AVAIL WITHOUT GARBAGE COLLECTION AL = FCh BX = amount of memory needed (paragraphs) Return: CF clear if memory available CF set if a workspace compaction is required SeeAlso: AL=FDh,INT C8"APL" --------r-88--FD----------------------------- INT 88 - APL*PLUS/PC - PERFORM GARBAGE COLLECTION AND RETURN AVAILABLE MEMORY AL = FDh Return: BX = number of paragraphs available in workspace SeeAlso: AL=FCh,INT C8"APL" --------r-88--FE----------------------------- INT 88 - APL*PLUS/PC - CREATE NAME AL = FEh ES:SI -> name CX = length of name Return: BX = STPTR of name DX = interpreter's data segment SeeAlso: AL=F9h,AL=FFh,INT C8"APL" --------r-88--FF----------------------------- INT 88 - APL*PLUS/PC - DETERMINE NAME STATUS AL = FFh ES:SI -> name CX = length of name Return: CF set if name ill-formed or already in use BX = STPTR if already in symbol table CF clear if name is available for use BX = 0000h Note: forces the name into the workspace and makes it immune from outswapping SeeAlso: AL=F9h,AL=FEh,INT C8"APL" --------r-89--------------------------------- INT 89 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 88"BASIC",INT 8A"BASIC" --------r-8A--------------------------------- INT 8A - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 89"BASIC",INT 8B"BASIC" --------r-8A--------------------------------- INT 8A - APL*PLUS/PC - PRINT SCREEN Note: same as INT 05 SeeAlso: INT 05,INT 8C"APL",INT CA"APL" --------r-8B--------------------------------- INT 8B - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 8A"BASIC",INT 8C"BASIC" --------r-8B--------------------------------- INT 8B - APL*PLUS/PC - BEEP Note: same as printing a ^G via INT 21/AH=02h SeeAlso: INT 21/AH=02h,INT CB"APL" --------v-8B--------------------------------- INT 8B - VIRUS - "ZeroHunt" - INSTALLATION CHECK (NOT A VECTOR!) Note: if the ZeroHunt virus is resident, this vector will contain either EE83h:019Bh (ZH-411) or EE83h:019Fh (ZH-415) SeeAlso: INT 70"VIRUS",INT 87"VIRUS",INT 9C"VIRUS" --------r-8C--------------------------------- INT 8C - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-8C--------------------------------- INT 8C - APL*PLUS/PC - CLEAR SCREEN MEMORY AX = flag 0000h do not save display attributes 0001h save attributes SeeAlso: INT CC"APL" --------r-8D--------------------------------- INT 8D - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-8E--------------------------------- INT 8E - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-8F--------------------------------- INT 8F - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-90--------------------------------- INT 90 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-90--------------------------------- INT 90 - APL*PLUS/PC - USED BY PORT 10 PRINTER DRIVER --------r-91--------------------------------- INT 91 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------N-91--------------------------------- INT 91 - IBM TOKEN RING ADAPTER - ??? SeeAlso: INT 81"TOKEN RING",INT 82"TOKEN RING",INT 93"TOKEN RING" --------r-92--------------------------------- INT 92 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------N-92--------------------------------- INT 92 - Sangoma X.25 INTERFACE PROGRAM BX:DX -> control block SeeAlso: INT 68"Sangoma" --------e-92E1------------------------------- INT 92 - Da Vinci eMail Dispatcher INTERFACE AH = E1h AL = function BX = stack count (number of words to push) CX:DX -> stack data (in word-reversed order ready to push) Return: AX = status (see #2562) Note: preserves BP, DS, SI, DI; other registers may be destroyed (Table 2562) Values for Da Vinci eMail function status: 0001h success FF97h "ERS_NOT_AVAILABLE" FF99h "ERS_TOO_MANY_NAMES" FF9Ah "ERS_BAD_NAME_PASSWORD" FFE3h "ERS_NAME_NOT_FOUND" FFF8h "ERS_USE_STRING" (call NetGetError to get error string) FFFFh "ERS_NO_SUCH_FILE" --------e-92E100----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetInitStart" AX = E100h BX = size of parameter block in words (000Ah) CX:DX -> parameter block (see #2563) Return: AX = 0001h success Desc: this function is used to initialize the dispatcher SeeAlso: AX=E101h,AX=E103h Format of Da Vinci eMail "NetInitStart" parameter block: Offset Size Description (Table 2563) 00h WORD segment of ??? 02h WORD offset of ??? 04h WORD high part of long ??? 06h WORD low part of long ??? 08h WORD high part of long ??? 0Ah WORD low part of long ??? 0Ch WORD high part of long ??? 0Eh WORD low part of long ??? 10h WORD high part of long ??? 12h WORD low part of long ??? --------e-92E101BX0000----------------------- INT 92 - Da Vinci eMail Dispatcher - "NetInitCheck" AX = E101h BX = 0000h CX:DX ignored Return: AX = 0001h success SeeAlso: AX=E100h,AX=E180h --------e-92E102BX0000----------------------- INT 92 - Da Vinci eMail Dispatcher - "NetCheckDriver" AX = E102h BX = 0000h CX:DX ignored Return: AX = 0001h success Desc: this function is used to determine if the dispatcher is loaded SeeAlso: AX=E10Bh,AX=E180h --------e-92E103BX0000----------------------- INT 92 - Da Vinci eMail Dispatcher - "NetTerminate" AX = E103h BX = 0000h CX:DX ignored Return: AX = status (see #2562) SeeAlso: AX=E100h --------e-92E104----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetWhereIs" AX = E104h BX = size of parameter block in words (0006h) CX:DX -> parameter block (see #2564) Return: AX = status (see #2562) Desc: this function is used to verify node address for usernames SeeAlso: AX=E180h Format of Da Vinci eMail "NetWhereIs" parameter block: Offset Size Description (Table 2564) 00h WORD segment of node address buffer 02h WORD offset of node address buffer 04h WORD segment of uppercase username 06h WORD offset of uppercase username 08h WORD segment of "DVSEMAIL" 0Ah WORD offset of "DVSEMAIL" --------e-92E105----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetOpen" AX = E105h BX = size of parameter block in words (0007h) CX:DX -> parameter block (see #2565) Return: AX = 0000h Error AX = handle Desc: this function is used to open a submission channel SeeAlso: AX=E10Ah,AX=E106h,AX=E108h Format of Da Vinci eMail "NetOpen" parameter block: Offset Size Description (Table 2565) 00h WORD operation (1 = read, 2 = write) 02h WORD segment of uppercase To: username 04h WORD offset of uppercase To: username 06h WORD segment of "DVSEMAIL" 08h WORD offset of "DVSEMAIL" 0Ah WORD segment of node address 0Ch WORD offset of node address --------e-92E106BX0004----------------------- INT 92 - Da Vinci eMail Dispatcher - "NetRead" AX = E106h BX = 0004h CX:DX -> parameter block Return: AX = 0001h SeeAlso: AX=E108h --------e-92E107BX0002----------------------- INT 92 - Da Vinci eMail Dispatcher - "NetGetError" AX = E107h BX = 0002h CX:DX -> parameter block Return: AX = 0001h SeeAlso: AX=E109h,AX=E180h --------e-92E108----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetWrite" AX = E108h BX = size of parameter block in words (0004h) CX:DX -> parameter block (see #2566) Return: AX = amount written Desc: This function is used to write transactions to the dispatcher. The command block is written first and then another call is used to write the associated data. SeeAlso: AX=E106h Format of Da Vinci eMail "NetWrite" parameter block: Offset Size Description (Table 2566) 00h WORD buffer count (see #2568) 02h WORD segment of command buffer (see #2567) 04h WORD offset of command buffer 06h WORD handle from NetOpen Format of Da Vinci eMail command buffer: Offset Size Description (Table 2567) 00h BYTE command 21h '!' Protocol commands for remote control 41h 'A' Authorization protocol element 42h 'B' Return(back) routing information Associated data is the From: username 43h 'C' Carbon Copy list Associated data is a comma delimitted list of usernames 44h 'D' Distribution list Associated data is a comma delimitted list of usernames 45h 'E' Mail end marker No associated data 48h 'H' Mail message header Associated data is a message header buffer 4Dh 'M' Mail message Associated data is the body of the message 4Fh 'O' Object 50h 'P' Paperclip attachment 52h 'R' Routing information Associated data is the To: username 53h 'S' Subject Associated data is the subject of the message 54h 'T' Trail of Reply/Forwards 01h BYTE subcommand 02h DWORD length of associated data Format of Da Vinci eMail message header buffer: Offset Size Description (Table 2568) 00h 30 BYTEs subject line 1Eh 24 BYTEs To 36h 24 BYTEs From 4Eh DWORD Time BYTE 00h BYTE hour BYTE minute BYTE second 52h DWORD Date BYTE 00h BYTE year BYTE month BYTE day 56h DWORD serial number (00000000h) 5Ah WORD mail types (see #2569) 5Ch WORD special types (0) Bitfields for Da Vinci eMail mail types: Bit(s) Description (Table 2569) 7 blind carbon copy 6 carbon copy 5 priority 4 confidential 3 certified 2 bulk 1-0 class (first, second, third, bulk) --------e-92E109----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetErrorFix" (UNUSED) AX = E109h BX = size of parameter block in words (0001h) CX:DX -> parameter block (see #2570) Return: AX = FF97h (ERS_NOT_AVAILABLE) SeeAlso: AX=E107h,AX=E180h Format of Da Vinci eMail "NetErrorFix" parameter block: Offset Size Description (Table 2570) 00h WORD ??? --------e-92E10A----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetClose" AX = E10Ah BX = size of parameter block in words (0001h) CX:DX -> parameter block (see #2571) Return: AX = 0001h Desc: this function is used to close a dispatcher handle SeeAlso: AX=E105h Format of Da Vinci eMail "NetClose" parameter block: Offset Size Description (Table 2571) 00h WORD handle from NetOpen --------e-92E10B----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetCheckQueue" AX = E10Bh BX = size of parameter block in words (0004h) CX:DX -> parameter block (see #2572) Return: AX = 0001h SeeAlso: AX=E102h,AX=E10Ch Format of Da Vinci eMail "NetCheckQueue" parameter block: Offset Size Description (Table 2572) 00h WORD segment of 24-byte username buffer 02h WORD offset of 24-byte username buffer 04h WORD segment of 24-byte protocol buffer 06h WORD offset of 24-byte protocol buffer --------e-92E10C----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetReadQueue" AX = E10Ch BX = size of parameter block in words (0002h) CX:DX -> parameter block (see #2573) Return: AX = 0001h SeeAlso: AX=E10Bh Format of Da Vinci eMail "NetReadQueue" parameter block: Offset Size Description (Table 2573) 00h WORD Segment of 128 byte node address buffer 02h WORD Offset of 128 byte node address buffer --------e-92E10D----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetSubmitName" AX = E10Dh BX = size of parameter block in words (0006h) CX:DX -> parameter block (see #2574) Return: AX = status (see #2562) Desc: this function is used to verify username/password SeeAlso: AX=E10Eh Format of Da Vinci eMail "NetSubmitName" parameter block: Offset Size Description (Table 2574) 00h WORD segment of uppercase password string 02h WORD offset of uppercase password string 04h WORD segment of uppercase username string 06h WORD offset of uppercase username string 08h WORD segment of "DVSEMAIL" 0Ah WORD offset of "DVSEMAIL" --------e-92E10E----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetRemoveName" AX = E10Eh BX = size of parameter block in words (0004h) CX:DX -> parameter block (see #2575) Return: AX = 0001h Desc: this function is used to remove a username SeeAlso: AX=E10Dh Format of Da Vinci eMail "NetRemoveName" parameter block: Offset Type Description (Table 2575) 00h WORD segment of uppercase username 02h WORD offset of uppercase username 04h WORD segment of "DVSEMAIL" 06h WORD offset of "DVSEMAIL" --------e-92E10FBX0000----------------------- INT 92 - Da Vinci eMail Dispatcher - IS ANYONE THERE? QUERY AX = E10Fh BX = 0000h CX:DX ignored Return: AX = 0001h SeeAlso: AX=E180h --------e-92E110----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetGetAltRoute" AX = E110h BX = size of parameter block in words (0006h) CX:DX -> parameter block (see #2576) Return: AX = 0001h SeeAlso: AX=E111h,AX=E113h Format of Da Vinci eMail "NetGetAltRoute" parameter block: Offset Size Description (Table 2576) 00h 6 WORDs ??? --------e-92E111----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetDeleteAltRoutes" AX = E111h BX = size of parameter block in words (0004h) CX:DX -> parameter block (see #2577) Return: AX = 0001h SeeAlso: AX=E110h,AX=E113h Format of Da Vinci eMail "NetDeleteAltRoutes" parameter block: Offset Size Description (Table 2577) 00h 4 WORDs ??? --------e-92E112----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetChangePassword" AX = E112h BX = size of parameter block in words (0008h) CX:DX -> parameter block (see #2578) Return: AX = 0001h SeeAlso: AX=E180h Format of Da Vinci eMail "NetChangePassword" parameter block: Offset Size Description (Table 2578) 00h 8 WORDs ??? --------e-92E113----------------------------- INT 92 - Da Vinci eMail Dispatcher - "NetSetAltRoute" AX = E113h BX = size of parameter block in words (0008h) CX:DX -> parameter block (see #2579) Return: AX = 0001h SeeAlso: AX=E110h,AX=E111h Format of Da Vinci eMail "NetSetAltRoute" parameter block: Offset Size Description (Table 2579) 00h 8 WORDs ??? --------e-92E175----------------------------- INT 92 - Da Vinci eMail Dispatcher - BECOME MICRO TSR AX = E175h Return: AX = 0012h BX = PSP SeeAlso: AX=E180h --------e-92E180----------------------------- INT 92 - Da Vinci eMail Dispatcher - INSTALLATION CHECK AX = E180h Return: AX = 0012h if installed ES:DX -> '$'-terminated driver information string SeeAlso: AX=E102h,AX=E105h,AX=E10Fh,AX=E175h --------r-93--------------------------------- INT 93 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------N-93--------------------------------- INT 93 - IBM TOKEN RING ADAPTER - ??? SeeAlso: INT 81"TOKEN RING",INT 91"TOKEN RING" --------r-94--------------------------------- INT 94 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------s-94----SI0000----------------------- INT 94 u - PCM driver - INITIALIZE SOUND SI = 0000h ES:BX -> parameters Return: ??? Program: PCM.COM is a sound driver for Media Vision's Pro Audio Spectrum sound boards Note: the installation check consists of testing for the signature string "PCMDRIVER" immediately preceding the interrupt handler; the word preceding the signature gives the PCM driver's version SeeAlso: SI=0001h,SI=0002h,SI=0003h,SI=0004h,SI=0005h,SI=000Ah Index: installation check;PCM driver|PCM.COM;installation check Index: PCM driver;installation check --------s-94----SI0001----------------------- INT 94 u - PCM driver - INITIALIZE PCM SI = 0001h ES:BX -> parameters Return: ??? SeeAlso: SI=0000h,SI=0002h,SI=0003h,SI=000Ah --------s-94----SI0002----------------------- INT 94 u - PCM driver - INITIALIZE PCM INFO SI = 0002h ES:BX -> parameters (see #2580) Return: ??? SeeAlso: SI=0000h,SI=0001h,SI=0003h,SI=000Ah Format of PCM driver function 0002h parameters: Offset Size Description (Table 2580) 00h DWORD rate 04h WORD channel number 06h WORD "comp" 08h WORD "dsize" --------s-94----SI0003----------------------- INT 94 u - PCM driver - INITIALIZE DMA BUFFER SI = 0003h ES:BX -> parameters (see #2581) Return: ??? SeeAlso: SI=0000h,SI=000Ah,SI=000Bh Format of PCM driver function 0003h parameters: Offset Size Description (Table 2581) 00h DWORD -> DMA buffer 04h WORD size of DMA buffer 06h WORD number of divisions --------s-94----SI0004----------------------- INT 94 u - PCM driver - INITIALIZE USER FUNCTION SI = 0004h ES:BX -> parameters (see #2582) Return: ??? SeeAlso: SI=0000h,SI=0001h Format of PCM driver function 0004h parameters: Offset Size Description (Table 2582) 00h DWORD -> user function --------s-94----SI0005----------------------- INT 94 u - PCM driver - BEGIN AUDIO PLAY SI = 0005h Return: ??? SeeAlso: SI=0000h,SI=0006h,SI=0007h,SI=0009h --------s-94----SI0006----------------------- INT 94 u - PCM driver - BEGIN AUDIO RECORD SI = 0006h Return: ??? SeeAlso: SI=0005h,SI=0007h,SI=0009h --------s-94----SI0007----------------------- INT 94 u - PCM driver - PAUSE AUDIO PLAY/RECORD SI = 0007h Return: ??? SeeAlso: SI=0005h,SI=0006h,SI=0008h --------s-94----SI0008----------------------- INT 94 u - PCM driver - RESUME AUDIO PLAY/RECORD SI = 0008h Return: ??? SeeAlso: SI=0007h --------s-94----SI0009----------------------- INT 94 u - PCM driver - STOP AUDIO PLAY/RECORD SI = 0009h Return: ??? SeeAlso: SI=0005h,SI=0006h,SI=0007h --------s-94----SI000A----------------------- INT 94 u - PCM driver - UNHOOK INTERRUPTS AND TURN OFF DMA SI = 000Ah Return: ??? SeeAlso: SI=0000h,SI=0001h,SI=0003h Index: uninstall;PCM driver --------s-94----SI000B----------------------- INT 94 u - PCM driver - FIND VALID DMA BUFFER IN HUGE MEMORY BLOCK SI = 000Bh ES:BX -> parameters (see #2583) Return: ??? SeeAlso: SI=0003h Format of PCM driver functio 000Bh parameters: Offset Size Description (Table 2583) 00h DWORD -> memory block to contain DMA buffer 04h WORD desired size of DMA buffer --------s-94----SI000D----------------------- INT 94 u - Media Vision PCM.COM - GET STATUS SI = 000Dh Return: AX = status (0000h = waiting) (see #2584) Bitfields for PCM.COM status: Bit(s) Description (Table 2584) 0 playing 1 recording 2 SBplaying 3 SBrecording 14 SBpaused 15 paused --------s-94----SI8000----------------------- INT 94 u - Media Vision PCM.COM - GET INTERNAL DMA BUFFER ADDRESS SI = 8000h Return: DX:AX -> DMA buffer Program: PCM.COM is a superset of the standard PCM driver which provides additional functions for fine control of the driver Note: the installation check for the Media Vision PCM.COM "shark" functions consists of testing for the signature "PCM-SHARK" at offset 107h in the INT 94 handler's segment SeeAlso: SI=8001h,SI=8004h Index: installation check;Media Vision PCM.COM|PCM.COM;installation check Index: Media Vision PCM.COM;"shark" functions --------s-94----SI8001----------------------- INT 94 u - Media Vision PCM.COM - GET INTERNAL DMA BUFFER SIZE AND DIVISIONS SI = 8001h Return: AX = DMA buffer size DX = divisions SeeAlso: SI=8000h --------s-94----SI8002----------------------- INT 94 u - Media Vision PCM.COM - CHECK BOARD ADDRESS SI = 8002h Return: AX = status 0000h if board not at specified I/O address other if board found Note: the I/O address is specified by ORing the base I/O port shifted left four bits into SI before calling INT 94 SeeAlso: SI=8000h --------s-94----SI8004----------------------- INT 94 u - Media Vision PCM.COM - GET INTERNAL NOTE BUFFER SI = 8004h Return: AX = offset of note buffer (segment = segment of internal DMA buffer) DX = size of buffer in note structures SeeAlso: SI=8000h --------s-94----SI8005----------------------- INT 94 u - Media Vision PCM.COM - SINGLE-STEP QUEUE SI = 8005h Return: ??? --------s-94----SI8011----------------------- INT 94 u - Media Vision PCM.COM - INITIALIZE SI = 8011h ES:BX -> "iobf91" structure Return: ??? --------s-94----SI8012----------------------- INT 94 u - Media Vision PCM.COM - LOAD SOUND FOR LATER PLAY THROUGH KEYBOARD SI = 8012h ES:BX -> "i94f92buf" structure Return: ??? SeeAlso: SI=8013h,SI=8014h --------s-94----SI8013----------------------- INT 94 u - Media Vision PCM.COM - GET INTERNAL SOUND USAGE SI = 8013h Return: AX = number of sounds used DX = maximum handles --------s-94----SI8014----------------------- INT 94 u - Media Vision PCM.COM - GET DATA FOR SPECIFIED SOUND SI = 8014h ES:BX -> "i94f92buf" structure to be filled in sound number field set to desired sound Return: AX = status 0000h successful FFFFh sound number out of range SeeAlso: SI=8012h,SI=8013h --------s-94----SI8015----------------------- INT 94 u - Media Vision PCM.COM - GET/SET INTERNAL DMA BUFFER SI = 8015h ES:BX -> DMA info structure (see #2585) Return: ??? Format of PCM.COM DMA info structure: Offset Size Description (Table 2585) 00h DWORD -> DMA buffer (offset FFFFh = return current buffer info) 04h WORD DMA buffer size 06h WORD divisions --------s-94----SI8016----------------------- INT 94 u - Media Vision PCM.COM - SIMULATE DOUBLE-SHIFT HOTKEY SI = 8016h AX = hotkey number (01h-08h) Return: ??? SeeAlso: AL=02h/SI=8017h --------s-94--01SI8017----------------------- INT 94 u - Media Vision PCM.COM - CTRL-G INTERCEPT AL = 01h SI = 8017h AH = new state (00h off, 01h on) Return: ??? SeeAlso: AL=02h/SI=8017h --------s-94--02SI8017----------------------- INT 94 u - Media Vision PCM.COM - DOUBLE-SHIFT-HOTKEY SOUND FEATURE AL = 02h SI = 8017h AH = new state (00h off, 01h on) Return: ??? --------s-94--04SI8017----------------------- INT 94 u - Media Vision PCM.COM - RANDOM SOUND FEATURE AL = 04h SI = 8017h AH = new state 00h off 01h on CX = minimum delay DX = maximum delay Return: ??? --------s-94--08SI8017----------------------- INT 94 u - Media Vision PCM.COM - NO ACTIVITY FEATURE AL = 08h SI = 8017h AH = new state 00h off 01h on DX:CX = delay Return: ??? SeeAlso: AL=10h/SI=8017h --------s-94--10SI8017----------------------- INT 94 u - Media Vision PCM.COM - TIMER CONTROL AL = 10h SI = 8017h AH = timer options (see #2586) DX:CX = delay if AH bit 7 set (one-shot if DX bit 15 set) Return: ??? SeeAlso: AL=08h/SI=8017h Bitfields for PCM.COM timer options: Bit(s) Description (Table 2586) 7 set timer 6 timer active (timer turned off if clear) 5-0 timer number --------s-94----SI8018----------------------- INT 94 u - Media Vision PCM.COM - GET INFO SI = 8018h AL = what to get 00h "F92state" 01h "F92bkgd" 02h "I10timer" 03h "I08state" Return: DX:AX -> desired information --------r-95--------------------------------- INT 95 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-95--------------------------------- INT 95 - APL*PLUS/PC - DETERMINE R= SPACE Note: use only when the R= option is invoked on entering APL --------r-96--------------------------------- INT 96 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-97--------------------------------- INT 97 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-98--------------------------------- INT 98 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-99--------------------------------- INT 99 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-9A--------------------------------- INT 9A - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT 99,INT 9B --------r-9B--------------------------------- INT 9B - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT 9A,INT 9C"BASIC" --------r-9C--------------------------------- INT 9C - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT 9B,INT 9D"BASIC" --------v-9C--------------------------------- INT 9C - VIRUS - "INT13" - ORIGINAL INT 13h VECTOR SeeAlso: INT 8B"VIRUS",INT 9D"VIRUS",INT 9E"VIRUS",INT 9F"VIRUS" --------r-9D--------------------------------- INT 9D - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT 9C"BASIC",INT 9E"BASIC" --------v-9D--------------------------------- INT 9D - VIRUS - "INT13" - ROM INT 13h ENTRY POINT Note: this vector is used by the virus to store the result of a call to INT 2F/AH=13h SeeAlso: INT 2F/AH=13h,INT 9C"VIRUS",INT 9E"VIRUS",INT 9F"VIRUS" --------r-9E--------------------------------- INT 9E - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT 9D"BASIC",INT 9F"BASIC" --------v-9E--------------------------------- INT 9E - VIRUS - "INT13" - ORIGINAL INT 21h VECTOR SeeAlso: INT 70"VIRUS",INT 9C"VIRUS",INT 9D"VIRUS",INT E0"VIRUS" --------r-9F--------------------------------- INT 9F - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT 9D"BASIC",INT A0"BASIC" --------v-9F--------------------------------- INT 9F - VIRUS - "INT13" - STORAGE FOR USER INT 13h VECTOR Note: while it is infecting a file, the INT13 virus grabs INT 13 and uses this interrupt to store the existing INT 13 vector for later restoration SeeAlso: INT 9C"VIRUS",INT 9D"VIRUS",INT D3"VIRUS" --------r-A0--------------------------------- INT A0 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT 9F"BASIC",INT A1"BASIC" --------r-A0--------------------------------- INT A0 - APL*PLUS/PC - USED BY APL/GSS*CGI GRAPHICS INTERFACE SeeAlso: INT 59 --------r-A1--------------------------------- INT A1 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT A0"BASIC",INT A2"BASIC" --------r-A2--------------------------------- INT A2 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT A1"BASIC",INT A3"BASIC" --------r-A3--------------------------------- INT A3 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT A2"BASIC",INT A4"BASIC" --------r-A4--------------------------------- INT A4 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT A3"BASIC",INT A5"BASIC" --------U-A4--------------------------------- INT A4 U - Right Hand Man - API AH = function number (v3.3 supports functions 00h-52h) Return: CF set on error CF clear if successful Program: Right Hand Man is a TSR desk-top utility originally by Red E Products which has evolved into Futurus Team Note: this interrupt is only hooked while popped up SeeAlso: INT 2F/AX=A4E0h --------r-A5--------------------------------- INT A5 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT A4"BASIC",INT A6"BASIC" --------r-A6--------------------------------- INT A6 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT A5"BASIC",INT A7"BASIC" --------r-A7--------------------------------- INT A7 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-A8--------------------------------- INT A8 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-A9--------------------------------- INT A9 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-AA--------------------------------- INT AA - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-AB--------------------------------- INT AB - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-AC--------------------------------- INT AC - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-AD--------------------------------- INT AD - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-AE--------------------------------- INT AE - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-AF--------------------------------- INT AF - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-B0--------------------------------- INT B0 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-B1--------------------------------- INT B1 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-B2--------------------------------- INT B2 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-B3--------------------------------- INT B3 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------U-B370------------------------------- INT B3 - ZIPKEY - GET VERSION AH = 70h Return: AH = major version AL = minor version CL = number of states and territories in current database DH = year of current database - 1900 DL = month of current database's file date Program: ZIPKEY is a resident ZIPCODE database by Eric Isaacson Note: if installed, the string "ZIPKEY" is present at offset 75h in the interrupt handler's segment, and the byte at 7Bh contains the API version number (00h for v1.x, 01h for v2.0) --------U-B371------------------------------- INT B3 - ZIPKEY - CONVERT TWO-LETTER ABBREVIATION TO STATE CODE AH = 71h BX = abbreviation, in either case (first letter in BL) Return: CF set on error AL = FFh CF clear if successful AL = ZIPKEY state code SeeAlso: AH=72h --------U-B372------------------------------- INT B3 - ZIPKEY - CONVERT STATE CODE TO TWO-LETTER ABBREVIATION AH = 72h BL = ZIPKEY state code Return: CF set on error AX destroyed CF clear if successful AX = abbreviation, in upper case SeeAlso: AH=71h,AH=73h --------U-B373------------------------------- INT B3 - ZIPKEY - CONVERT STATE CODE TO STATE NAME AH = 73h BL = ZIPKEY state code ES:DI -> buffer for name Return: CF set on error AX destroyed CF clear if successful ES:DI points one byte beyond end of name SeeAlso: AH=72h --------U-B374------------------------------- INT B3 - ZIPKEY - CONVERT ZIPCODE TO ASCII DIGITS AH = 74h DX = zipcode region (0-999) CH = last two digits of zipcode (0-99) ES:DI -> buffer Return: CF set on error AX destroyed CF clear if successful ES:DI points one byte beyond end of digit string --------U-B375------------------------------- INT B3 - ZIPKEY - LOOK UP STATE CODE FOR ZIPCODE AH = 75h DX = zipcode region (0-999) CH = last two digits of zipcode (0-99) Return: CF set on error (zipcode not found) AL = suggested state code, FFh if none CF clear if successful AL = ZIPKEY state code BX = area code (v2.0+) SeeAlso: AH=76h,AH=79h --------U-B376------------------------------- INT B3 - ZIPKEY - LOOK UP CITY AND STATE FOR ZIPCODE AH = 76h DX = zipcode region (0-999) CH = last two digits of zipcode (0-99) ES:DI -> buffer for name Return: CF set on error AL = suggested state code, FFh if none ES:DI buffer filled with suggested city name CF clear if successful AL = ZIPKEY state code BX = area code (v2.0+) ES:DI points one byte beyond end of name SeeAlso: AH=75h,AH=78h,AH=7Eh --------U-B377------------------------------- INT B3 - ZIPKEY - PLAY BACK EXIT KEY FOR ENTRY WITH GIVEN ZIPCODE AH = 77h DX = zipcode region (0-999) CH = last two digits of zipcode (0-99) BX = 16-bit BIOS keycode for a defined ZIPKEY alternate exit key Return: CF set on error AX destroyed CF clear if successful zipcode specification as defined by the BX keystroke is placed in keyboard buffer, as if the user had popped up ZIPKEY and exited by pressing the key specified by BX --------U-B378------------------------------- INT B3 - ZIPKEY - LOOK UP ZIPCODES FOR A GIVEN STATE AND CITY AH = 78h BL = ZIPKEY state code DS:SI -> city name, terminated with 0Dh if complete name, 00h if prefix Return: BH = number of matching entries (set to 51 if more than 50) DX = zipcode region of first match (0-999) CL = last two digits of first zipcode in the range (0-99) CH = last two digits of last zipcode in the range (0-99) AX destroyed SeeAlso: AH=79h,AH=7Ah --------U-B379------------------------------- INT B3 - ZIPKEY - LOOK UP ZIPCODES FOR A GIVEN CITY AH = 79h BL = ZIPKEY state code of first state to search DS:SI -> city name, terminated with 0Dh if complete name, 00h if prefix Return: AL = ZIPKEY state code of first matching state BH = number of matching entries (set to 51 if more than 50) DX = zipcode region of first match (0-999) CL = last two digits of first zipcode in first range (0-99) CH = last two digits of last zipcode in first range (0-99) Note: to find all matching cities, repeat search with BL set to one more than the returned AL SeeAlso: AH=78h,AH=7Ah --------U-B37A------------------------------- INT B3 - ZIPKEY - FETCH AN ENTRY FROM A PREVIOUS LOOKUP AH = 7Ah BL = case number (0 to one less than value returned in BH by lookup) Return: AL = ZIPKEY state code DX = zipcode region (0-999) CL = last two digits of first zipcode in the range (0-99) CH = last two digits of last zipcode in the range (0-99) SeeAlso: AH=78h,AH=79h --------U-B37B------------------------------- INT B3 - ZIPKEY - GET VALUES NEEDED TO SAVE ZIPKEY CONTEXT AH = 7Bh Return: BL = maximum number of characters for a city name BH = ZIPKEY state code for last city-name search, or FFh if none CX:DX = internal code identifying last city search AX destroyed SeeAlso: AH=7Ch --------U-B37C------------------------------- INT B3 - ZIPKEY - RESTORE ZIPKEY CONTEXT AH = 7Ch BL = maximum number of characters for a city name BH = ZIPKEY state code for last city-name search, or FFh if none CX:DX = internal code returned by AH=7Bh Return: CF set on error CF clear if successful AX destroyed SeeAlso: AH=7Bh --------U-B37D------------------------------- INT B3 - ZIPKEY - REQUEST POP UP AH = 7Dh BL = index number to simulate pressing a hotkey FFh for immediate popup with no playback on return Return: CF set on error AL = error code FDh already busy with another request FEh illegal function CF clear if successful AX destroyed window popped up and was closed by the user SeeAlso: AH=70h --------U-B37E------------------------------- INT B3 - ZIPKEY - GET NAME OF PRIMARY CITY FOR A ZIPCODE REGION AH = 7Eh DX = zipcode region (0-999) ES:DI -> buffer for name Return: CF set on error AL = FFh region does not exist CF clear if successful AL = ZIPKEY state code ES:DI points one byte beyond end of name SeeAlso: AH=76h --------U-B37F------------------------------- INT B3 - ZIPKEY - ENABLE/DISABLE HOTKEYS AH = 7Fh BL = function 00h turn off hotkeys 01h turn on hotkeys 02h return hotkey status 03h toggle hotkey status Return: AL = hotkey status 00h off 01h on --------U-B380------------------------------- INT B3 - ZIPKEY v2.0+ - DETERMINE STATE FOR AREA CODE AH = 80h BX = telephone area code (decimal) Return: CF clear if successful AL = ZIPKEY state code DX = first ZIP region for state (03E8h if Canada) CX = number of ZIP regions in state CF set on error AL = FFh DX = 03E9h --------r-B4--------------------------------- INT B4 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-B4--------------------------------- INT B4 - StackMan - REQUEST NEW STACK Return: SS:SP -> new stack Program: StackMan is a freeware stack manager by Franz Veldman of ESaSS B.V. which functions as a replacement for the DOS STACK= command as well as permitting multiple TSRs to share a pool of stack space Note: the installation check consists of testing for the string "STACKXXX" at offset 0Ah from the interrupt handler SeeAlso: INT 2F/AX=C9FFh,INT B5"STACKMAN" Index: installation check;STACKMAN --------r-B5--------------------------------- INT B5 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT B4"BASIC",INT B6"BASIC" --------r-B5--------------------------------- INT B5 - StackMan - RESTORE ORIGINAL STACK SS:SP -> stack returned by INT B4 Return: SS:SP restored to value before INT B4 SeeAlso: INT 2F/AX=C9FFh,INT B4"StackMan" --------m-B5--------------------------------- INT B5 U - Netroom NETSWAP4 - ??? ??? Return: ??? SeeAlso: INT 31/AH=57h --------r-B6--------------------------------- INT B6 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT B5"BASIC",INT B7"BASIC" --------y-B6--------------------------------- INT B6 - (NOT A VECTOR!) - USED BY TBFENCE Program: TBFence is a security program by ESaSS B.V. which transparently encrypts floppies and optionally allows only encrypted diskettes to be accessed Note: the low word of this vector (0000h:02D8h) contains the segment of the TBFence INT 13h code, which starts with the signature word E487h; this forms the installation check the highest byte of this vector contains the start of a FAR JMP instruction to ??? SeeAlso: INT B7"TBFENCE" Index: installation check;TBFence --------r-B7--------------------------------- INT B7 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT B6"BASIC",INT B8"BASIC" --------y-B7--------------------------------- INT B7 - TBFENCE - ??? SeeAlso: INT B6"TBFENCE" --------r-B8--------------------------------- INT B8 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT B7"BASIC",INT B9"BASIC" --------r-B9--------------------------------- INT B9 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-BA--------------------------------- INT BA - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-BB--------------------------------- INT BB - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-BC--------------------------------- INT BC - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-BD--------------------------------- INT BD - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-BE--------------------------------- INT BE - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT BD"BASIC",INT BF"BASIC" --------Q-BE--------------------------------- INT BE - DESQview/X - ??? Note: points at an IRET SeeAlso: INT 15/AX=BFDEh/BX=0006h,INT 63"DESQview" --------r-BF--------------------------------- INT BF - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT BE"BASIC",INT C0"BASIC" --------r-C0--------------------------------- INT C0 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT BF"BASIC",INT C1"BASIC" --------d-C0--------------------------------- INT C0 - AMI BIOS - DRIVE 0 DATA Note: this vector is used by some AMI BIOSes to store the first four bytes of the hard disk parameter table SeeAlso: INT 41,INT 60"Adaptec",INT C1"AMI",INT C2"AMI",INT C3"AMI",INT C4"AMI" --------r-C1--------------------------------- INT C1 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT C0"BASIC",INT C2"BASIC" --------d-C1--------------------------------- INT C1 - AMI BIOS - DRIVE 0 DATA Note: this vector is used by some AMI BIOSes to store the second four bytes of the hard disk parameter table SeeAlso: INT 41,INT 60"Adaptec",INT C0"AMI",INT C2"AMI",INT C3"AMI" --------r-C2--------------------------------- INT C2 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT C1"BASIC",INT C3"BASIC" --------d-C2--------------------------------- INT C2 - AMI BIOS - DRIVE 0 DATA Note: this vector is used by some AMI BIOSes to store the third four bytes of the hard disk parameter table SeeAlso: INT 41,INT 60"Adaptec",INT C0"AMI",INT C1"AMI",INT C3"AMI" --------r-C3--------------------------------- INT C3 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT C2"BASIC",INT C4"BASIC" --------d-C3--------------------------------- INT C3 - AMI BIOS - DRIVE 0 DATA Note: this vector is used by some AMI BIOSes to store the final four bytes of the hard disk parameter table SeeAlso: INT 41,INT 60"Adaptec",INT C0"AMI",INT C1"AMI",INT C2"AMI" --------r-C4--------------------------------- INT C4 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT C3"BASIC",INT C5"BASIC" --------d-C4--------------------------------- INT C4 - AMI BIOS - DRIVE 1 DATA Note: this vector is used by some AMI BIOSes to store the first four bytes of the second hard disk's parameter table SeeAlso: INT 46,INT 64"Adaptec",INT C0"AMI",INT C5"AMI",INT C6"AMI",INT C7"AMI" --------r-C5--------------------------------- INT C5 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT C4"BASIC",INT C6"BASIC" --------d-C5--------------------------------- INT C5 - AMI BIOS - DRIVE 1 DATA Note: this vector is used by some AMI BIOSes to store the second four bytes of the second hard disk's parameter table SeeAlso: INT 46,INT 64"Adaptec",INT C0"AMI",INT C4"AMI",INT C6"AMI",INT C7"AMI" --------r-C6--------------------------------- INT C6 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT C5"BASIC",INT C7"BASIC" --------r-C6--------------------------------- INT C6 - APL*PLUS/PC - IDENTICAL TO INT 86 Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete the older interrupts SeeAlso: INT 86"APL" --------d-C6--------------------------------- INT C6 - AMI BIOS - DRIVE 1 DATA Note: this vector is used by some AMI BIOSes to store the third four bytes of the second hard disk's parameter table SeeAlso: INT 46,INT 64"Adaptec",INT C0"AMI",INT C4"AMI",INT C5"AMI",INT C7"AMI" --------r-C7--------------------------------- INT C7 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT C6"BASIC",INT C8"BASIC" --------r-C7--------------------------------- INT C7 - APL*PLUS/PC - ??? Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete the older interrupts SeeAlso: INT 87"APL" --------d-C7--------------------------------- INT C7 - AMI BIOS - DRIVE 1 DATA Note: this vector is used by some AMI BIOSes to store the final four bytes of the second hard disk's parameter table SeeAlso: INT 46,INT 64"Adaptec",INT C0"AMI",INT C4"AMI",INT C5"AMI",INT C6"AMI" --------r-C8--------------------------------- INT C8 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT C7"BASIC",INT C9"BASIC" --------r-C8--------------------------------- INT C8 - APL*PLUS/PC - IDENTICAL TO INT 88 Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete the older interrupts SeeAlso: INT 88"APL" --------r-C9--------------------------------- INT C9 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT C8"BASIC",INT CA"BASIC" --------r-C9--------------------------------- INT C9 - APL*PLUS/PC - ??? Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete the older interrupts SeeAlso: INT 89"APL" --------r-CA--------------------------------- INT CA - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT C9"BASIC",INT CB"BASIC" --------r-CA--------------------------------- INT CA - APL*PLUS/PC - PRINT SCREEN Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete the older interrupts SeeAlso: INT 8A"APL" --------r-CB--------------------------------- INT CB - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT CA"BASIC",INT CC"BASIC" --------r-CB--------------------------------- INT CB - APL*PLUS/PC - BEEP Notes: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete the older interrupts same as printing a ^G via INT 21/AH=02h SeeAlso: INT 8B"APL" --------r-CC--------------------------------- INT CC - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT CB"BASIC",INT CD"BASIC" --------r-CC--------------------------------- INT CC - APL*PLUS/PC - CLEAR SCREEN MEMORY AX = flag 0000h do not save display attributes 0001h save attributes Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete the older interrupts SeeAlso: INT 8C"APL" --------r-CD--------------------------------- INT CD - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT CC"BASIC",INT CE"BASIC" --------r-CD--------------------------------- INT CD - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------r-CE--------------------------------- INT CE - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT CD"BASIC",INT CF"BASIC" --------r-CE--------------------------------- INT CE - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------r-CF--------------------------------- INT CF - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT CE"BASIC",INT D0"BASIC" --------r-CF--------------------------------- INT CF - APL*PLUS/PC - DEFAULT LOW-RESOLUTION TIMER FOR QUAD MF FUNCTION SeeAlso: INT E0"APL" --------r-D0--------------------------------- INT D0 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT CF"BASIC",INT D1"BASIC" --------r-D0--------------------------------- INT D0 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------U-D0--------------------------------- INT D0 - [not a vector!] - NJFRERAM SIGNATURE VECTOR Program: NJFRERAM is a resident free-memory display utility by Mike "Nifty James" Blaszczak Note: if NJFRERAM is installed, this vector points at the signature "NJ" Index: installation check;NJFRERAM --------r-D1--------------------------------- INT D1 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT D0"BASIC",INT D2"BASIC" --------r-D1--------------------------------- INT D1 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------r-D2--------------------------------- INT D2 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT D1"BASIC",INT D3"BASIC" --------r-D2--------------------------------- INT D2 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------r-D3--------------------------------- INT D3 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT D2"BASIC",INT D4"BASIC" --------r-D3--------------------------------- INT D3 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------v-D3--------------------------------- INT D3 - VIRUS - "Antiexe" - RELOCATED INT 13 SeeAlso: INT 9F"VIRUS" --------r-D4--------------------------------- INT D4 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT D3"BASIC",INT D5"BASIC" --------r-D4--------------------------------- INT D4 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------O-D400------------------------------- INT D4 O - PC-MOS/386 v5.01 - OBSOLETE FUNCTIONS AH = 00h and 01h Return: nothing Desc: PC-MOS/386 v5.01 reports that these functions are no longer supported and enters an endless loop Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating system by The Software Link, Inc. --------O-D402------------------------------- INT D4 - PC-MOS/386 v3.0+ - GET SYSTEM CONTROL BLOCK POINTER AH = 02h Return: AX = 0000h ES:BX -> System Control Block in V86 mode (see #2587) ES:EBX -> System Control Block in native mode (see #2587) Note: superseded by AH=26h SeeAlso: AH=04h,AH=10h,AH=26h,AH=28h,AH=29h,AH=2Ah,INT 21/AX=3000h,INT 38 Format of PC-MOS/386 System Control Block: Offset Size Description (Table 2587) 00h WORD pointer to first TCB in chain 02h 17 BYTEs reserved 13h WORD pointer to current task's TCB 15h WORD pointer to TCB of visible (console) task --------O-D403------------------------------- INT D4 - PC-MOS/386 v5.01 - GET/SET EXTENDED DIRECTORY INFORMATION AH = 03h AL = subfunction (00h get, 01h set) DS:(E)DX -> pathname ES:(E)BX -> 10-byte buffer for directory information (see #2588) Return: CF clear if successful AL = permitted access level for file (00h-03h) ES:(E)BX -> modified buffer (AL=01h on entry) CF set on error AX = error code (see #0885 at INT 21/AH=59h) Notes: BX/DX are used in V86 mode, EBX/EDX in native mode the file class cannot be changed for files because it affects the encryption method, but directories can have their classes changed Format of PC-MOS/386 directory information: Offset Size Description (Table 2588) 00h BYTE reserved (0) 01h BYTE file class ('A'-'Z' or 00h) 02h DWORD user ID of file creator 06h WORD file creation time (see #0876 at INT 21/AX=5700h) 08h WORD file creation date (see #0877 at INT 21/AX=5700h) --------O-D404------------------------------- INT D4 - PC-MOS/386 v3.0+ - GET TASK CONTROL BLOCK AH = 04h BX = task ID or FFFFh for calling task Return: CF clear if successful ES = segment of Task Control Block (TCB) (see #2589) CF set on error AX = error code (see #0885 at INT 21/AH=59h) Note: superseded by AH=27h SeeAlso: AH=02h,AH=27h,AH=28h,AH=29h,AH=2Ah,INT 38 Format of PC-MOS/386 Task Control Block: Offset Size Description (Table 2589) 00h BYTE signature byte "H" if allocated from system memory pool 01h BYTE header block ID, "T" = TCB 02h WORD length of block in paragraphs 04h WORD segment address of next header block (0000h if last) 06h WORD segment address of previous header block (0000h if first) 08h WORD pointer to next TCB 0Ah WORD pointer to previous TCB 0Ch WORD pointer to associated TCB (if applicable) 0Eh WORD reserved ---TCB--- 10h WORD TCB task ID 12h WORD native context save area 14h WORD start address of task 16h WORD end address of task 18h BYTE task priority 19h BYTE task time slice 1Ah BYTE "TCBWAIT" run status of task 1Bh BYTE "TCBSTAT" what the task is waiting for 1Ch DWORD address of polling routine 20h BYTE error code from last function call 21h 11 BYTEs name of currently executing task 2Ch 4 BYTEs ??? 30h BYTE keyboard disabled if bit 1 set 31h BYTE current shift state and toggles 32h 2 BYTEs ??? 34h BYTE current video mode 35h BYTE current video page 36h BYTE number of text columns per screen 37h BYTE number of text rows per screen 38h WORD length of video buffer 3Ah WORD video page length 3Ch WORD apge start address in video RAM 3Eh 4 WORDs current cursor positions for four screen pages 46h 8 BYTEs ??? 4Eh WORD current cursor type 50h BYTE current palette setting 51h BYTE original video mode 52h BYTE start CRT row (00h or 01h) 53h BYTE video RAM in task active 54h WORD handle of video save area 56h WORD page count of video save area 58h WORD segment address of video save area 5Ah WORD poitner to first Task File Block (see #2592) 5Ch WORD pointer to first Current Directory Block (see #2595) 5Eh WORD pointer to active Current Directory Block (see #2595) 60h BYTE number of drives 61h BYTE current drive (0=A:, etc.) 62h DWORD disk transfer address 66h 4 BYTEs ??? 6Ah BYTE verify flag (nonzero = on) 6Bh BYTE break flag (nonzero = on) 6Ch WORD share/lock retry count 6Eh WORD ticks between share/lock retries 70h BYTE remote printer flags (see #2590) 71h BYTE ETX/ACK delay count 72h WORD spooler segment address 74h 2 BYTEs ??? 76h 3 BYTEs remote printer redirection for LPT1 through LPT3 (see #2591) 79h 2 BYTEs ??? 7Bh DWORD offset of username in TCB 7Fh BYTE current output class 80h 7 BYTEs protection access rights, 2 bits per class (writeable!) 87h 122 BYTEs ??? 101h BYTE TCB sleep downcounter value 102h 20 BYTEs ??? 116h BYTE last scan code ... 5D0h DWORD far pointer to Device Driver Terminal's entry point 5D4h WORD offset of logical screen 5D6h WORD segment of logical screen 5D8h WORD cursor offset within page 5DAh BYTE screen columns 5DBh WORD async port number (0000h = none) 5DDh DWORD physical baudrate 5E1h 19 BYTEs reserved for Device Driver Terminal (DDT) ... 7A6h DWORD far pointer to unregister calling chain Bitfields for PC-MOS/386 remote printer flags: Bit(s) Description (Table 2590) 0 LPT1 to terminal 1 LPT2 to terminal 2 LPT3 to terminal 3 escape to printer pending 4 use XON/XOFF 5 use ETX/ACK 6 waiting for ACK or XON 7 transparent printing on (Table 2591) Values for PC-MOS/386 remote printer redirection: 00h not redirected 01h redirected to COM1 ... 18h redirected to COM24 51h redirected to LPT1 52h redirected to LPT2 53h redirected to LPT3 Format of PC-MOS/386 Task File Block: Offset Size Description (Table 2592) 00h BYTE signature byte "H" if allocated from system memory pool 01h BYTE header block ID, "F" = task file block 02h WORD length of block in paragraphs 04h WORD segment address of next header block (0000h if last) 06h WORD segment address of previous header block (0000h if first) 08h WORD pointer to next TCB 0Ah WORD pointer to previous TCB 0Ch WORD pointer to associated TCB (if applicable) 0Eh WORD reserved ---TFB--- 10h WORD segment address of next TFB 12h WORD segment address of previous TFB 14h WORD segment address of TFB's Global File Block (see #2594) 16h WORD segment address of owner's PSP 18h WORD file handle 1Ah 3 BYTEs ??? 1Dh DWORD file position 21h 4 BYTEs ??? 25h BYTE IOCTL flags (see #2593) 26h 2 BYTEs ??? Bitfields for PC-MOS/386 IOCTL flags: Bit(s) Description (Table 2593) 0 stdin 1 stdout 2 null device 3 clock device 4 reserved 5 ASCII mode instead of binary 6 EOF encountered on input 7 device rather than file Format of PC-MOS/386 Global File Block: Offset Size Description (Table 2594) 00h BYTE signature byte "H" if allocated from system memory pool 01h BYTE header block ID, "G" = global file block 02h WORD length of block in paragraphs 04h WORD segment address of next header block (0000h if last) 06h WORD segment address of previous header block (0000h if first) 08h WORD pointer to next TCB 0Ah WORD pointer to previous TCB 0Ch WORD pointer to associated TCB (if applicable) 0Eh WORD reserved ---GFB--- 10h 10 BYTEs ??? 1Ah WORD file attribute 1Ch BYTE ??? 1Dh DWORD address of device driver 21h WORD first cluster 23h WORD time of last modification 25h WORD date of last modification 27h DWORD size of file in bytes 2Bh 11 BYTEs ??? 36h 11 BYTEs device name or FCB-format filename 41h WORD segment address of TFB list 43h WORD segment address of first RLB (see #2597) (0000h = none) 45h BYTE flag: nonzero if GFB refers to character device 46h WORD address of Block Device Block (see #2596) 48h WORD sector of file's directory entry 4Ah WORD high word of file's directory entry 4Ch WORD ofsset of directory entry within sector Format of PC-MOS/386 Current Directory Block: Offset Size Description (Table 2595) 00h BYTE signature byte "H" if allocated from system memory pool 01h BYTE header block ID, "C" = current directory block 02h WORD length of block in paragraphs 04h WORD segment address of next header block (0000h if last) 06h WORD segment address of previous header block (0000h if first) 08h WORD pointer to next TCB 0Ah WORD pointer to previous TCB 0Ch WORD pointer to associated TCB (if applicable) 0Eh WORD reserved ---CDB--- 10h BYTE drive number 11h BYTE ??? 12h 64 BYTEs directory name 52h WORD first directory cluster (0000h = root) Format of PC-MOS/386 Block Device Block: Offset Size Description (Table 2596) 00h BYTE signature byte "H" if allocated from system memory pool 01h BYTE header block ID, "B" = block device block 02h WORD length of block in paragraphs 04h WORD segment address of next header block (0000h if last) 06h WORD segment address of previous header block (0000h if first) 08h WORD pointer to next TCB 0Ah WORD pointer to previous TCB 0Ch WORD pointer to associated TCB (if applicable) 0Eh WORD reserved ---BDB--- 10h BYTE logical drive 11h BYTE unit passed to driver 12h WORD sector size 14h BYTE cluster mask 15h BYTE cluster shift count 16h WORD starting sector of first FAT 18h BYTE number of FATs 19h WORD number of root directories 1Bh WORD sector number of first data sector (cluster 0002h) 1Dh WORD number of clusters + 1 (number of highest data cluster) 1Fh BYTE number of sectors in FAT 20h WORD beginning root directory sector number 22h DWORD device driver address 26h BYTE media descriptor byte 27h 5 BYTEs ??? 2Ch BYTE flag: volume > 32MB 2Dh BYTE ??? 2Eh BYTE number of sectors per cluster 2Fh WORD number of clusters on device 31h WORD number of free clusters (FFFFh = unknown) 33h WORD root directory cluster number 35h WORD pointer to alias/subst string 37h WORD TCB segment address of owner (0000h = none) Format of PC-MOS/386 Record Lock Block: Offset Size Description (Table 2597) 00h BYTE signature byte "H" if allocated from system memory pool 01h BYTE header block ID, "R" = record lock block 02h WORD length of block in paragraphs 04h WORD segment address of next header block (0000h if last) 06h WORD segment address of previous header block (0000h if first) 08h WORD pointer to next TCB 0Ah WORD pointer to previous TCB 0Ch WORD pointer to associated TCB (if applicable) 0Eh WORD reserved ---RLB--- 10h WORD segment address of owner's PSP 12h WORD segment address of Global File Block (see #2594) 14h WORD segment address of owner's Task File Block (see #2592) 16h DWORD file offset of locked region start 1Ah DWORD length of locked region 1Eh WORD owner's handle for file --------O-D407------------------------------- INT D4 - PC-MOS/386 v3.0+ - WAIT FOR EVENT AH = 07h AL = events to monitor (see #2598) BX = number of timer ticks until timeout if AL bit 1 set CX = bitmap of IRQs to monitor if AL bit 2 set (bit 0 = IRQ0 .. bit 15 = IRQ15) DX = port to monitor if AL bit 3 set Return: CF clear if successful AL = type of event which woke up task (see #2598) CX = IRQ (if any) which awakened task DX = port (if any) which awakened task CF set on error AX = error code (see #0885 at INT 21/AH=59h) Note: a device driver may make this call with AL=00h, which indicates that the driver is responsible for setting and clearing the TCBWAIT field in the TCB. To put task to sleep, set TCBWAIT bits 2-0 to 001; to reawaken it, set bit 1 (leaving other bits unchanged) SeeAlso: AH=04h,INT 16/AH=00h,INT 38 Bitfields for PC-MOS/386 events to monitor: Bit(s) Description (Table 2598) 0 keystroke 1 timeout 2 IRQ 3 port access 7 return status of user poll routine (other ignored if set) --------O-D410------------------------------- INT D4 - PC-MOS/386 v3.0+ - ENTER/LEAVE NATIVE 386 EXECUTION MODE AH = 10h AL = direction (00h return to V86 mode, 01h enter native mode) CX = length in bytes of Native Context Area ( >=1024 ) DX = segment of Native Context Area Return: CF clear if successful running in desired mode at instruction following INT D4 call all segment registers converted to appropriate selectors/segments CF set on error AX = error code (see #0885 at INT 21/AH=59h) Note: MS-DOS calls are available in protected mode SeeAlso: AH=11h,AH=12h,AH=13h,INT 2F/AX=1687h,INT 67/AX=DE0Ch,INT 38 --------O-D411------------------------------- INT D4 - PC-MOS/386 v3.0+ - ALLOCATE NATIVE MODE MEMORY BLOCK AH = 11h EBX = block length in bytes Return: CF clear if successful EBX = number of bytes actually allocated ES = selector for allocated block CF set on error AX = error code (see #0885 at INT 21/AH=59h) Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating system by The Software Link, Inc. Note: the memory must be released before the program terminates SeeAlso: AH=10h,AH=12h,INT 38 --------O-D412------------------------------- INT D4 - PC-MOS/386 v3.0+ - FREE NATIVE MODE MEMORY BLOCK AH = 12h ES = selector for block to free Return: CF clear if successful CF set on error AX = error code (see #0885 at INT 21/AH=59h) SeeAlso: AH=10h,AH=11h,AH=13h,INT 38 --------O-D413------------------------------- INT D4 - PC-MOS/386 v5.01 - GET ALIAS FOR SELECTOR (NATIVE MODE ONLY) AH = 13h AL = type of alias selector (00h data, 01h stack, 02h code) BX = selector Return: CF clear if successful AX = new selector or 0000h if BX selector not found CF set on error AX = error code (see #0885 at INT 21/AH=59h) SeeAlso: AH=11h,AH=12h --------O-D416------------------------------- INT D4 - PC-MOS/386 v5.01 - SET/CLEAR IRQ RESERVATION AH = 16h AL = function (00h clear, 01h set reservation) CX = IRQ number Return: AX = status (0000h successful, 0001h currently reserved by another task) SeeAlso: AH=07h,INT 14/AH=11h"PC-MOS" --------O-D419------------------------------- INT D4 - PC-MOS/386 v5.01 - GET TASK ID AH = 19h Return: BX = caller's task ID Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating system by The Software Link, Inc. SeeAlso: AH=1Dh,AH=1Eh --------O-D41A------------------------------- INT D4 - PC-MOS/386 v5.01 - GET/SET TASK PRIORITY AH = 1Ah AL = subfunction (00h read, 01h set, 02h get and set) BX = task ID (FFFFh for current task) CL = new priority value Return: CF clear if successful CL = current priority value CF set on error AX = error code (see #0885 at INT 21/AH=59h) SeeAlso: AH=1Bh,AH=1Ch --------O-D41B------------------------------- INT D4 - PC-MOS/386 v5.01 - GET/SET TIME SLICE AH = 1Bh AL = subfunction (00h read, 01h set, 02h get and set) BX = task ID (FFFFh for current task) (see AH=19h) CL = new time slice value Return: CF clear if successful CL = current time slice value CF set on error AX = error code (see #0885 at INT 21/AH=59h) SeeAlso: AH=1Ah,AH=1Ch --------O-D41C------------------------------- INT D4 - PC-MOS/386 v5.01 - GET/SET KEYBOARD MODE AH = 1Ch AL = subfunction (00h enable, 01h disable, 02h get mode) BX = task ID (FFFFh for current task) Return: CF clear if successful CL = current keyboard state CF set on error AX = error code (INT 21/AH=59h) Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating system by The Software Link, Inc. SeeAlso: AH=1Ah,AH=1Bh --------O-D41D------------------------------- INT D4 - PC-MOS/386 v5.01 - GET CURRENT PROGRAM NAME AH = 1Dh BX = task ID (FFFFh for current task) (see AH=19h) ES:DI -> buffer for program name (see #2599) Return: CF clear if successful ES:DI buffer filled CF set on error AX = error code (see #0885 at INT 21/AH=59h) SeeAlso: AH=19h,AH=1Eh Format of PC-MOS/386 program name buffer: Offset Size Description (Table 2599) 00h 8 BYTEs filename 08h 3 BYTEs extension --------O-D41E------------------------------- INT D4 - PC-MOS/386 v5.01 - GET CURRENT USERNAME AND SECURITY CLASS AH = 1Eh BX = task ID (FFFFh for current task) ES:DI -> 4-byte buffer for username Return: CF clear if successful CL = security class 20h (' ') none 41h-5Ah ('A'-'Z') security level ES:DI buffer filled CF set on error AX = error code (see #0885 at INT 21/AH=59h) SeeAlso: AH=19h,AH=1Dh --------O-D41F------------------------------- INT D4 - PC-MOS/386 v5.01 - GET TASK PARTITION INFORMATION AH = 1Fh BX = task ID (FFFFh for current task) (see AH=19h) Return: CF clear if successful CX = start segment of task DX = ending segment of task CF set on error AX = error code (see #0885 at INT 21/AH=59h) Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating system by The Software Link, Inc. SeeAlso: AH=2Dh --------O-D420------------------------------- INT D4 - PC-MOS/386 v5.01 - GET PORT AND BAUDRATE INFORMATION AH = 20h BX = task ID (FFFFh for current task) (see AH=19h) Return: CF clear if successful CX = port number (0000h if none) DI:SI = baudrate (if CX nonzero) CF set on error AX = error code (see #0885 at INT 21/AH=59h) SeeAlso: INT 14/AH=0Ch"FOSSIL" --------O-D421------------------------------- INT D4 - PC-MOS/386 v5.01 - REMOVE A TASK AH = 21h BX = task ID (FFFFh for current task) (see AH=19h) Return: CF clear if successful AX = ASCII percentage of System Memory Pool used (AH = tens digit, AL = ones digit) DS,SI destroyed CF set on error AX = error code (see #0885 at INT 21/AH=59h) Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating system by The Software Link, Inc. SeeAlso: AH=22h --------O-D422------------------------------- INT D4 - PC-MOS/386 v5.01 - ADD A TASK TO THE SYSTEM AH = 22h DS:SI -> addtask data structure (see #2601) Return: CF clear if successful ES = segment address of the new task's TCB data structure CF set on error AX = error code (see #2600) SeeAlso: AH=21h (Table 2600) Values for PC-MOS/386 error code: 08h insufficient memory 0Bh invalid addtask structure format 12h insufficient available space in system memory pool 1Fh general failure 55h already allocated 57h if task already in use or invalid parameter Format of PC-MOS/386 addtask data structure: Offset Size Description (Table 2601) 00h WORD task size in KB (min 16KB) 02h WORD task ID (0000h for automatic selection) 04h BYTE task class (' ' or 'A'-'Z') 05h DWORD -> ASCIZ name of task startup batchfile 09h DWORD -> task's terminal driver (0000000h = background task) 0Dh WORD task port 0Fh DWORD task baud rate 13h DWORD (ret) total extended memory 17h DWORD (ret) number of 4K extended memory pages allocated 1Bh WORD (ret) paragraphs of system memory pool allocated 1Dh WORD (ret) system memory pool size in paragraphs 1Fh WORD (ret) ASCII task percentage of system memory pool 21h 3 BYTEs reserved --------O-D423------------------------------- INT D4 - PC-MOS/386 v5.01 - CHANGE TERMINAL DRIVER AH = 23h BX = task ID (FFFFh for current task) DS:SI -> entry point of the new Device Driver Terminal Return: CF clear if successful CF set on error AX = error code (see #0885 at INT 21/AH=59h) --------O-D424------------------------------- INT D4 U - PC-MOS/386 v5.01 - GET OPERATING SYSTEM SERIAL NUMBER AH = 24h Return: DS:DX -> '$'-terminated string containing the serial number --------O-D425------------------------------- INT D4 - PC-MOS/386 v5.01 - IDENTIFY LOAD ADDRESS OF DEVICE DRIVER LOCATION AH = 25h DX = driver's CS value Return: AX = segment address of driver in system memory pool (0000h if the driver is not within the system memory pool) Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating system by The Software Link, Inc. --------O-D426------------------------------- INT D4 - PC-MOS/386 v5.01 - GET SYSTEM CONTROL BLOCK SEGMENT/SELECTOR AH = 26h Return: DX = segment/selector of the System Control Block (see #2587) Note: this function supersedes AH=02h SeeAlso: AH=02h,AH=27h,AH=28h,AH=29h,AH=2Ah --------O-D427------------------------------- INT D4 - PC-MOS/386 v5.01 - GET TASK CONTROL BLOCK SEGMENT/SELECTOR AH = 27h BX = task ID (FFFFh if current task) (see AH=19h) Return: CF clear if successful DX = segment/selector for the Task Control Block (see #2589) CF set on error AX = error code (INT 21/AH=59h) Note: this function supersedes AH=04h SeeAlso: AH=26h,AH=28h,AH=29h,AH=2Ah --------O-D428------------------------------- INT D4 - PC-MOS/386 v5.01 - GET CONTROL BLOCK DATA FROM SCB OR TCB AH = 28h BX = offset into control block at which to start reading CX = number of bytes to read DX = segment/selector of control block obtained via AH=26h or AH=27h ES:DI -> buffer for data Return: CF clear if successful CF set on error AX = error code (see also INT 21/AH=59h) 05h access denied due to an invalid segment/selector SeeAlso: AH=26h,AH=27h,AH=29h,AH=2Ah --------O-D429------------------------------- INT D4 - PC-MOS/386 v5.01 - WRITE CONTROL BLOCK DATA INTO SCB OR TCB AH = 29h BX = offset into control block at which to start writing CX = number of bytes to write DX = segment/selector of control block obtained via AH=26h or AH=27h DS:SI -> buffer containing data to be written Return: CF clear if successful CF set on errro AX = error code (see also INT 21/AH=59h) 05h access denied due to an invalid segment/selector Note: this function performs no bounds checking Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating system by The Software Link, Inc. SeeAlso: AH=26h,AH=27h,AH=28h,AH=2Ah --------O-D42A------------------------------- INT D4 - PC-MOS/386 v5.01 - SWAP CONTROL BLOCK DATA OF SCB OR TCB AH = 2Ah BX = offset into control block at which to start swap CX = number of bytes to swap DX = segment/selector of control block obtained via AH=26h or AH=27h DS:SI -> buffer containing new data and to receive current data Return: CF clear if successful CF set on error AX = error code (see also INT 21/AH=59h) 05h access denied due to an invalid segment/selector Note: the interrupts are disabled during the swap to prevent corruption SeeAlso: AH=26h,AH=27h,AH=28h,AH=29h --------O-D42C------------------------------- INT D4 - PC-MOS/386 v5.01 - GET/SET SPOOLER PARAMETERS AH = 2Ch AL = function 00h set spooler timeout CX = timout value in seconds 01h get spooler timeout Return: CX = current timeout in seconds 02h get spooler parameters Return: CH = priority (00h-09h) CL = disposition (d, h, i, n, s) SI = class (a - z) 03h set spooler parameters CH = priority (00h-09h) CL = disposition (d, h, i, n, s) SI = class (a - z) BX = task ID (FFFFh for current task) DX = LPT number Return: CF clear if successful CF set on error AX = error code (see #0885 at INT 21/AH=59h) SeeAlso: AH=00h,AH=02h,AH=03h --------O-D42D------------------------------- INT D4 - PC-MOS/386 v5.01 - GET MAXIMUM TASK SIZE AH = 2Dh Return: DX = maximum task size in paragraphs BX = start address of task space Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating system by The Software Link, Inc. SeeAlso: AH=1Fh,AH=22h --------r-D5--------------------------------- INT D5 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT D4"BASIC",INT D6"BASIC" --------r-D5--------------------------------- INT D5 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------r-D6--------------------------------- INT D6 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT D5"BASIC",INT D7"BASIC" --------r-D6--------------------------------- INT D6 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------r-D7--------------------------------- INT D7 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT D6"BASIC",INT D8"BASIC" --------r-D7--------------------------------- INT D7 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------r-D8--------------------------------- INT D8 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT D7"BASIC",INT D9"BASIC" --------r-D8--------------------------------- INT D8 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------H-D8--------------------------------- INT D8 - Screen Thief v1.00 - RELOCATED IRQ0 Range: INT 78h to INT E0h, selected by commandline switch Note: Screen Thief relocates IRQs 0 through 7 to INT D8 to INT DF by default, but may be directed via a commandline switch to use any range starting at a multiple of 8 between 78h and E0h SeeAlso: INT 08"IRQ0",INT 2D/AL=10h"Screen Thief",INT 50"DESQview" SeeAlso: INT D9"Screen Thief" --------r-D9--------------------------------- INT D9 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT D8"BASIC",INT DA"BASIC" --------r-D9--------------------------------- INT D9 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------H-D9--------------------------------- INT D9 - Screen Thief v1.00 - RELOCATED IRQ1 Range: INT 79h to INT E1h, selected by commandline switch Note: (see INT D8"Screen Thief") SeeAlso: INT 09"IRQ1",INT D8"Screen Thief",INT DA"Screen Thief" --------r-DA--------------------------------- INT DA - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT D9"BASIC",INT DB"BASIC" --------r-DA--------------------------------- INT DA - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------H-DA--------------------------------- INT DA - Screen Thief v1.00 - RELOCATED IRQ2 Range: INT 7Ah to INT E2h, selected by commandline switch Note: (see INT D8"Screen Thief") SeeAlso: INT 0A"IRQ2",INT D9"Screen Thief",INT DB"Screen Thief" --------r-DB--------------------------------- INT DB - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT DA"BASIC",INT DC"BASIC" --------r-DB--------------------------------- INT DB - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------H-DB--------------------------------- INT DB - Screen Thief v1.00 - RELOCATED IRQ3 Range: INT 7Bh to INT E3h, selected by commandline switch Note: (see INT D8"Screen Thief") SeeAlso: INT 0B"IRQ3",INT DA"Screen Thief",INT DC"Screen Thief" --------u-DC--------------------------------- INT DC - PC/370 v4.1- - API SeeAlso: INT 60"PC/370" --------r-DC--------------------------------- INT DC - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT DB"BASIC",INT DD"BASIC" --------r-DC--------------------------------- INT DC - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES --------H-DC--------------------------------- INT DC - Screen Thief v1.00 - RELOCATED IRQ4 Range: INT 7Ch to INT E4h, selected by commandline switch Note: (see INT D8"Screen Thief") SeeAlso: INT 0C"IRQ4",INT DB"Screen Thief",INT DD"Screen Thief" --------r-DD--------------------------------- INT DD - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT DC"BASIC",INT DE"BASIC" --------r-DD--------------------------------- INT DD - STSC APL*PLUS/PC v9.0 - PLACE KEYSTROKE EVENTS IN INPUT BUFFER BX = where to place keystrokes FFFFh insert before current buffer contents 0000h replace current contents 0001h insert after current contents CX = number of keystroke events to insert ES:SI -> data to be placed into buffer (list of WORD key codes) 4000h + N = normal ASCII keystroke N (N = 00h to FFh) 4100h + N = extended ASCII keystroke N (N = 03h to 84h) SeeAlso: INT 16/AH=05h --------H-DD--------------------------------- INT DD - Screen Thief v1.00 - RELOCATED IRQ5 Range: INT 7Dh to INT E5h, selected by commandline switch Note: (see INT D8"Screen Thief") SeeAlso: INT 0D"IRQ5",INT DC"Screen Thief",INT DE"Screen Thief" --------r-DE--------------------------------- INT DE - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT DD"BASIC",INT DF"BASIC" --------r-DE--------------------------------- INT DE - APL*PLUS/PC - ??? Note: appears to be the same as INT 16 --------H-DE--------------------------------- INT DE - Screen Thief v1.00 - RELOCATED IRQ6 Range: INT 7Eh to INT E6h, selected by commandline switch Note: (see INT D8"Screen Thief") SeeAlso: INT 0E"IRQ6",INT DD"Screen Thief",INT DF"Screen Thief" --------b-DF--------------------------------- INT DF - Victor 9000/Sirius 1 - SuperBIOS --------r-DF--------------------------------- INT DF - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT DE"BASIC",INT E0"BASIC" --------r-DF--------------------------------- INT DF - APL*PLUS/PC - SAME AS INT 10 SeeAlso: INT 10 --------H-DF--------------------------------- INT DF - Screen Thief v1.00 - RELOCATED IRQ7 Range: INT 7Fh to INT E7h, selected by commandline switch Note: (see INT D8"Screen Thief") SeeAlso: INT 0F"IRQ7",INT DE"Screen Thief" --------r-E0--------------------------------- INT E0 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT 80"BASIC",INT DF"BASIC",INT E1"BASIC" --------r-E0--------------------------------- INT E0 - APL*PLUS/PC - RESTIME HIGH-RESOLUTION TIMER FOR QUAD MF FUNCTION SeeAlso: INT CF"APL" --------v-E0--------------------------------- INT E0 - VIRUS - "Micro-128" - ??? Note: Micro-128 also overwrites the upper half of the interrupt table SeeAlso: INT 9E"VIRUS",INT F1"VIRUS" ----------E0--------------------------------- INT E0 - DeskMate (Tandy) - DESK EXECUTIVE API AX = function code (numerous) parameters passed in BX, DX, ES, DI, and/or BP Return: AX = return from function Program: DeskMate is a proprietary GUI from Tandy distributed with several models of the Tandy 1000's, 2500's, 3000's, and laptops. Retail and runtime versions also exist. Some Tandy's are designed to boot directly into DeskMate. SeeAlso: INT 15/AX=7002h,INT E1"DeskMate" --------O-E0--------------------------------- INT E0 - CP/M-86, Concurrent CP/M, DR Multiuser DOS - FUNCTION CALLS CL = function number (see #2602,#2603) DS,DX = parameters Return: as appropriate for function CX is often the error code (see #2604) Notes: several functions are covered in more detail in following entries most of these calls are also supported by Digital Research's DOS Plus v2.1; the unsupported functions are 26h,29h-2Bh,3Ah,3Dh-62h,71h-8Ch, 90h-92h,94h-97h,9Bh-ABh, and AEh-FFh SeeAlso: INT 21/AX=4459h,INT 21/AH=E0h"DOS Plus" (Table 2602) Values for CP/M-86,DR Multiuser DOS function number: 00h terminate calling process (see also INT 21/AH=00h) 01h read a character 02h write character to default console (see also INT 21/AH=02h) 03h read character from default AUX (see also INT 21/AH=03h) 04h write character to default AUX (see also INT 21/AH=04h) 05h write character to default list device (see also INT 21/AH=05h) 06h perform raw I/O on default console (see also INT 21/AH=06h) 07h return default AUX input status 08h return default AUX output status 09h write string to default console (see also INT 21/AH=09h) 0Ah read string from default console (see also INT 21/AH=0Ah) 0Bh return default console input status (see also INT 21/AH=0Bh) 0Ch get BDOS release ID 0Dh reset all disk drives (see also INT 21/AH=0Dh) 0Eh set default drive (see also INT 21/AH=0Eh) 0Fh open file via FCB (see also INT 21/AH=0Fh,#0574) 10h close file via FCB (see also INT 21/AH=10h) 11h search for first matching file with FCB (see also INT 21/AH=11h) 12h search for next matching file with FCB (see also INT 21/AH=12h) 13h delete file via FCB (see also INT 21/AH=13h) 14h sequential read via FCB (see also INT 21/AH=14h) 15h sequential write via FCB (see also INT 21/AH=15h) 16h create file via FCB (see also INT 21/AH=16h) 17h rename file via FCB (see also INT 21/AH=17h) 18h get bit map of logged drives 19h get default drive (see also INT 21/AH=19h) 1Ah set DMA address offset 1Bh get default disk allocation vector (see also INT 21/AH=1Bh) 1Ch set default drive to read-only 1Dh get bit map of read-only drives 1Eh set file attributes via FCB (see also INT 21/AX=4301h) 1Fh get address of disk parameter block (see also INT 21/AH=1Fh) 20h get/set default user number 21h read random record via FCB (see also INT 21/AH=21h) 22h write random record via FCB (see also INT 21/AH=22h) 23h compute file size with FCB (see also INT 21/AH=23h) 24h get FCB random record number (see also INT 21/AH=24h) 25h reset specified drives 26h access specified drives (not in DR DOS Plus v2.1) 27h free specified drives 28h write random with FCB, zero fill (see also also INT 21/AH=28h) 2Ah lock records in FCB file (see also INT 21/AH=5Ch) 2Bh unlock records in FCB file (see also INT 21/AH=5Ch) 2Ch set BDOS multisector count 2Dh set BDOS error mode 2Eh get free space on disk 2Fh load, initialize, and jump to process (see also INT 21/AH=4Bh) 30h flush write-deferred buffers 31h get/set system variable (DOS Plus v2.1) 32h call BIOS (XIOS) character routine (see #2603) 33h set DMA address segment 34h get DMA buffer address 35h CP/M-86 allocate maximum memory 36h allocate maximum memory at specified segment 37h CP/M-86 allocate memory segment (see also INT 21/AH=48h) 38h allocate memory at specified segment 39h CP/M-86 free specified memory segment (see also INT 21/AH=49h) 3Ah CP/M-86 free all memory (not in DOS Plus v2.1) 3Bh load .CMD file into memory 3Ch (DOS Plus v2.1) call RSX program 40h (DR-NET) log on a server 41h (DR-NET) log off a server 42h (DR-NET) send a message 43h (DR-NET) receive a message 44h (DR-NET) get network status 45h (DR-NET) get requestor configuration table 46h (DR-NET) set compatibility attributes 47h (DR-NET) get server configuration table 48h (DR-NET) set network error mode 49h (DR-NET) attach network 4Ah (DR-NET) detach network 4Bh (DR-NET) set default password 4Ch (DR-NET) get-set long timeout 4Dh (DR-NET) get parameter table 50h (DR-NET) get network information 53h get current time (see also INT 21/AH=2Ch) 54h set current time (see also INT 21/AH=2Dh) 55h get binary system date (see also INT 21/AH=2Ah) 56h set system date (see also INT 21/AH=2Bh) 57h allocate system flag 58h deallocate system flag 59h reserve memory in global area 5Ah lock physical drive 5Bh unlock physical drive 5Ch search path for executable file 5Dh load and execute command (see also INT 21/AH=4Bh) 5Eh get/set process exit code 5Fh set country information 60h get country information 63h truncate FCB file (see also INT 21/AH=28h) 64h create/update directory label 65h get directory label 66h get FCB date stamp and password mode 67h write extended FCB 68h set system date and time 69h get system date and time in binary 6Ah establish password for file access 6Bh get OS serial number 6Ch (DOS Plus v2.1) get/set program return code 6Dh get/set console mode 6Eh get/set string delimiter 6Fh write block to default console 70h write block to default list device 71h execute DOS-compatible function 74h set FCB time and date stamps 80h allocate memory 82h deallocate memory 83h poll I/O device 84h wait on system flag 85h set system flag 86h create message queue 87h open message queue 88h delete message queue 89h read from message queue 8Ah conditionally read from message queue 8Bh write to message queue 8Ch conditionally write to message queue 8Dh delay calling process 8Eh call process dispatcher (yield CPU) 8Fh terminate calling process (same as function 00h) 90h create a process 91h set calling process' priority 92h attach to default console 93h detach from default console 95h assign default console to process 96h interpret and execute commandline 97h resident procedure library 98h parse ASCII string into FCB (see also INT 21/AH=29h) 99h return default console 9Ah get address of system data (SYSDAT) 9Bh get system time and date 9Ch return calling process' descriptor 9Dh terminate process by name or PD address 9Eh attach to default list device 9Fh detach from default list device A0h select default list device A1h conditionally attach to default list device A2h conditionally attach to default console A3h get OS version number A4h get default list device A5h attach to default AUX A6h detach from default AUX A7h conditionally attach to default AUX A8h set default AUX A9h return default AUX ACh read block from default AUX ADh (DOS Plus v2.1) write block to default AUX B0h configure default AUX B1h get/set device control parameters B2h send Break through default AUX B3h allocate physical memory B4h free physical memory B5h map physical memory B6h nondestructive message queue read B7h timed wait on system flag B8h get/set I/O port mapping B9h set list device timeout BAh set AUX timeout value BBh execute XIOS service BDh (DR Multiuser DOS) delay FFh return 80386 to native mode (Table 2603) Values for DOS Plus v2.1 XIOS functions: 00h terminate program 01h ??? 02h check for console input status 03h read character from console 04h write character to console 05h write character to list device 06h write character to auxiliary device 07h read cahracter from auxiliary device 0Fh get list device status 10h-14h reserved 15h device initialization 16h check console output status 17h-7Fh reserved ---BBC Acorn--- 80h get XIOS version 81h get Tube semaphore 82h release Tube semaphore 83h select text/graphics 84h update B&W graphics rectangle 85h update color graphics rectangle 86h get/release/update mouse 87h get system error info 88h entry in CLOCK called by WatchDog RSP 89h BBC OSBYTE function 8Ah BBC OSWORD function (Table 2604) Values for DR Multiuser DOS Error Return Code: 00h no error 01h system call not implemented 02h illegal system call number 03h cannot find memory 04h illegal flag number 05h flag overrun 06h flag underrun 07h no unused Queue Descriptors 08h no free queue buffer 09h cannot find queue 0Ah queue in use 0Ch no free Process Descriptors 0Dh no queue access 0Eh empty queue 0Fh full queue 10h CLI queue missing 11h no 8087 in system 12h no unused Memory Descriptors 13h illegal console number 14h no Process Descriptor match 15h no console match 16h no CLI process 17h illegal disk number 18h illegal filename 19h illegal filetype 1Ah character not ready 1Bh illegal Memory Descriptor 1Ch bad return from BDOS load 1Dh bad return from BDOS read 1Eh bad return from BDOS open 1Fh null command 20h not owner of resource 21h no CSEG in load file 22h process Descriptor exists on Thread Root 23h could not terminate process 24h cannot attach to process 25h illegal list device number 26h illegal password 28h external termination occurred 29h fixup error upon load 2Ah flag set ignored 2Bh illegal auxilliary device number --------O-E0----CL03------------------------- INT E0 - DR Multiuser DOS - "A_READ" - READ CHARACTER FROM AUX DEVICE CL = 03h Return: AL = ASCII character Notes: A_READ reads the next 8-bit character from the logical auxilliary input device (AUXn:); control is not returned to the calling process until a character has been read. if another process owns AUX, this call blocks until the device becomes available SeeAlso: INT 21/AH=03h,INT E0/CL=04h,INT E0/CL=07h,INT E0/CL=A5h,INT E0/CL=ACh --------O-E0----CL04------------------------- INT E0 - DR Multiuser DOS - "A_WRITE" - WRITE CHARACTER TO AUX DEVICE CL = 04h DL = ASCII character Return: nothing Note: if another process owns AUX, this call blocks until the device becomes available SeeAlso: INT 21/AH=04h,INT E0/CL=03h,INT E0/CL=08h,INT E0/CL=A5h,INT E0/CL=ADh --------O-E0----CL07------------------------- INT E0 - DR Multiuser DOS - "A_STATIN" - GET INPUT STATUS OF AUX DEVICE CL = 07h Return: AL = status 00h not ready FFh character available Desc: determine whether the current AUX device has input available SeeAlso: INT E0/CL=03h,INT E0/CL=08h --------O-E0----CL08------------------------- INT E0 - DR Multiuser DOS - "A_STATOUT" - GET OUTPUT STATUS OF AUX DEVICE CL = 08h Return: AL = status 00h not ready FFh ready for output Desc: determine whether the current AUX device is able to accept more output SeeAlso: INT E0/CL=04h,INT E0/CL=07h --------O-E0----CL59------------------------- INT E0 - ConcCP/M,DR Multiuser DOS - "S_MEMORY" - RESERVE MEMORY IN GLOBAL AREA CL = 59h DX = size in bytes Return: AX = status FFFFh failed other successful ES:BX -> reserved memory --------O-E0----CL86------------------------- INT E0 - ConcCP/M,DR Multiuser DOS - "Q_MAKE" - CREATE MESSAGE QUEUE CL = 86h DS:DX -> queue descriptor (see #2605) Return: AX = status (0000h success, FFFFh failure) CX = error code (see #2604) SeeAlso: INT E0/CL=87h Format of DR Multiuser DOS queue descriptor: Offset Size Description (Table 2605) 00h 2 WORDs internal use, initialize to zeros 04h WORD flags 06h 8 BYTEs queue name 0Eh WORD length of message 10h WORD number of messages 12h 4 WORDs internal use, initialize to zeros 1Ah WORD offset in system area of buffer for messages --------O-E0----CL87------------------------- INT E0 - ConcCP/M,DR Multiuser DOS - "Q_OPEN" - OPEN MESSAGE QUEUE CL = 87h DS:DX -> queue parameter block (see #2606) Return: AX = status (0000h success, FFFFh failure) CX = error code (see #2604) SeeAlso: INT E0/CL=86h,INT E0/CL=89h Format of DR Multiuser DOS queue parameter block: Offset Size Description (Table 2606) 00h WORD internal use, initialize to zero 02h WORD queue ID (set by INT E0/CL=87h) 04h WORD internal use, initialize to zero 06h WORD offset of queue message buffer 08h 8 BYTEs queue name --------O-E0----CL89------------------------- INT E0 - ConcCP/M,DR Multiuser DOS - "Q_READ" - READ MESSAGE QUEUE CL = 89h DS:DX -> queue parameter block (see #2606) Return: AX = status (0000h success, FFFFh failure) CX = error code (see #2604) SeeAlso: INT E0/CL=87h,INT E0/CL=8Ah,INT E0/CL=8Bh --------O-E0----CL8A------------------------- INT E0 - ConcCP/M,DR Multiuser DOS - "Q_CREAD" - CONDITIONALLY READ MSG QUEUE CL = 8Ah DS:DX -> queue parameter block (see #2606) Return: AX = status (0000h success, FFFFh failure) CX = error code (see #2604) SeeAlso: INT E0/CL=87h,INT E0/CL=89h,INT E0/CL=8Ch --------O-E0----CL8B------------------------- INT E0 - ConcCP/M,DR Multiuser DOS - "Q_WRITE" - WRITE MESSAGE QUEUE CL = 8Bh DS:DX -> queue parameter block (see #2606) Return: AX = status (0000h success, FFFFh failure) CX = error code (see #2604) SeeAlso: INT E0/CL=89h,INT E0/CL=8Ch --------O-E0----CL8C------------------------- INT E0 - ConcCP/M,DR Multiuser DOS - "Q_CWRITE" - CONDITIONALLY WRITE MSG QUEUE CL = 8Ch DS:DX -> queue parameter block (see #2606) Return: AX = status (0000h success, FFFFh failure) CX = error code (see #2604) SeeAlso: INT E0/CL=8Ah,INT E0/CL=8Bh --------O-E0----CL8E------------------------- INT E0 - ConcCP/M,DR Multiuser DOS - "P_DISPATCH" - CALL DISPATCHER CL = 8Eh DX = FFFFh (optional) to force dispatch Return: nothing Desc: allow other processes of the same or higher priority to run if they are ready Note: if DX=FFFFh, a dispatch is forced even if no other process is ready SeeAlso: INT E0/CL=91h --------O-E0----CL91------------------------- INT E0 - ConcCP/M,DR Multiuser DOS - "P_PRIORITY" - SET PROCESS PRIORITY CL = 91h DL = new priority (00h highest to FFh lowest) Note: sets priority of calling process; transient processes are initialized to priority C8h SeeAlso: INT E0/CL=8Eh --------O-E0----CL93------------------------- INT E0 - ConcCP/M,DR Multiuser DOS - "C_DETACH" - DETACH FROM DEFAULT CONSOLE CL = 93h Return: AX = status 0000h successfully detached FFFFh detach failed SeeAlso: INT E0/CL=A6h --------O-E0----CLA5------------------------- INT E0 - DR Multiuser DOS - "A_ATTACH" - ATTACH AUX DEVICE CL = A5h Desc: attaches the default auxiliary device to the calling process unless it is already attached to another process, in which case the call blocks until the device becomes available Note: this call should be used before attempting to read or write from the AUX device; however, the I/O calls internally call this function to ensure device ownership SeeAlso: INT E0/CL=03h,INT E0/CL=04h,INT E0/CL=A6h,INT E0/CL=A7h,INT E0/CL=A8h SeeAlso: INT E0/CL=ACh,INT E0/CL=ADh,INT E0/CL=B0h --------O-E0----CLA6------------------------- INT E0 - DR Multiuser DOS - "A_DETACH" - DETACH FROM AUX DEVICE CL = A6h Return: AX = status 0000h successfully detached FFFFh detach failed CX = error code SeeAlso: INT E0/CL=93h,INT E0/CL=A5h,INT E0/CL=A7h --------O-E0----CLA7------------------------- INT E0 - DR Multiuser DOS - "A_CATTACH" - CONDITIONALLY ATTACH TO AUX DEVICE CL = A7h Return: AX = status 0000h attached FFFFh unable to attach Desc: attaches the default auxiliary device to the calling process if it is available Note: does not block if the device is already in use SeeAlso: INT E0/CL=A5h,INT E0/CL=A6h,INT E0/CL=A8h,INT E0/CL=B0h --------O-E0----CLA8------------------------- INT E0 - DR Multiuser DOS - "A_SET" - SET DEFAULT AUX DEVICE NUMBER CL = A8h DL = auxiliary device number Return: AX = status 0000h successful FFFFh failed CX = error code Desc: specify which physical device will become AUX SeeAlso: INT E0/CL=A5h,INT E0/CL=A9h --------O-E0----CLA9------------------------- INT E0 - DR Multiuser DOS - "A_GET" - GET DEFAULT AUX DEVICE NUMBER CL = A9h Return: AL = current default auxiliary device number Desc: determine which physical device is currently AUX SeeAlso: INT E0/CL=A8h --------O-E0----CLAC------------------------- INT E0 - DR Multiuser DOS - "A_READBLK" - READ STRING FROM AUX DEVICE CL = ACh DS:DX -> character control block (CHCB) (see #2607) Return: AX = number of characters read Desc: read characters from the default auxiliary (AUXn:) device into a buffer until the buffer is full or the device is no longer ready Notes: if the device is initially not ready, blocks until at least one character has been read if another process owns AUX, this call blocks until the device becomes available SeeAlso: INT E0/CL=03h,INT E0/CL=A5h,INT E0/CL=ADh Format of DR Multiuser DOS character control block (CHCB): Offset Size Description (Table 2607) 00h DWORD pointer to character buffer 04h WORD length of character buffer --------O-E0----CLAD------------------------- INT E0 - DR Multiuser DOS - "A_WRITEBLK" - WRITE STRING TO AUX DEVICE CL = ADh DS:DX -> character control block (see #2607) Return: AX = number of characters written Note: does not return until at least one character has been written SeeAlso: INT E0/CL=04h,INT E0/CL=A5h,INT E0/CL=ACh --------O-E0----CLB0------------------------- INT E0 - DR Multiuser DOS - "A_CONFIG" - GET/SET AUX DEVICE PARAMETERS CL = B0h DX:DX -> AUX device parameter block (see #2608) Return: AX = status 0000h successful parameter block updated FFFFh failed CX = error code SeeAlso: INT E0/CL=A5h,INT E0/CL=B1h Format of DR Multiuser DOS AUX device parameter block: Offset Size Description (Table 2608) 00h BYTE function (00h get, 01h set) 01h BYTE baud rate (see #2610) FFh = don't change/unknown 02h BYTE parity (see #2609) 03h BYTE stop bits (00h one, 01h 1.5, 02h two, FFh unknown/don't change) 04h BYTE data bits (05h-08h or FFh unknown/don't change) 05h BYTE handshake (00h none, 01h DTS/DSR, 02h RTS/CTS, 04h XON/XOFF, FFh unknown/don't change) 06h BYTE XON character, FFh unknown/don't change 07h BYTE XOFF character, FFh unknown/don't change (Table 2609) Values for DR Multiuser DOS AUX parity: 00h none 01h odd 02h none 03h even 04h stick parity bit FFh don't change/unknown (Table 2610) Values for DR Multiuser DOS AUX baud rate: 00h 50 baud 01h 62.5 baud 02h 75 baud 03h 110 baud 04h 134.5 baud 05h 150 baud 06h 200 baud 07h 300 baud 08h 600 baud 09h 1200 baud 0Ah 1800 baud 0Bh 2000 baud 0Ch 2400 baud 0Dh 3600 baud 0Eh 4800 baud 0Fh 7200 baud 10h 9600 baud 11h 19200 baud 12h 38400 baud 13h 56000 baud 14h 76800 baud 15h 115200 baud --------O-E0----CLB1------------------------- INT E0 - DR Multiuser DOS - "A_CONTROL" - GET/SET AUX CONTROL PARAMETERS CL = B1h DS:DX -> AUX device control block (see #2611) Return: AX = status 0000h successful control block updated FFFFh failed CX = error code SeeAlso: INT E0/CL=B0h,INT E0/CL=B2h Format of DR Multiuser DOS AUX device control block: Offset Size Description (Table 2611) 00h BYTE function (00h get, 01h set) 01h BYTE DTR state (00h low, 01h high, FFh unknown/don't change) 02h BYTE RTS state (00h low, 01h high, FFh unknown/don't change) 03h BYTE DSR state (00h low, 01h high, FFh unknown/don't change) 04h BYTE CTS state (00h low, 01h high, FFh unknown/don't change) 05h BYTE DCD state (00h low, 01h high, FFh unknown/don't change) 06h BYTE RI state (00h inactive, 01h active, FFh unknown/don't change) --------O-E0----CLB2------------------------- INT E0 - DR Multiuser DOS - "A_BREAK" - SEND BREAK TO AUX DEVICE CL = B2h DX = duration of break in system ticks (0001h-FFFFh) Return: AX = status 0000h successful break signal completed FFFFh failed CX = error code Note: if the AUX device is currently owned by another process, this call will block until the device becomes available SeeAlso: INT E0/CL=A5h,INT E0/CL=B1h --------O-E0----CLBD------------------------- INT E0 - DR Multiuser DOS - "P_DELAY" - DELAY EXECUTION CL = BDh DX = delay in system ticks Return: after the delay elapses Notes: the length of a system tick is installation-dependent (typically 1/50 or 1/60 second); the length may be determined by reading the TICKSPERSEC value from the system data segment the actual delay before the process is rescheduled to run may be up to one tick longer than requested; the delay between rescheduling and actual execution cannot be predicted if higher-priority processes are awaiting a turn at the CPU SeeAlso: INT 15/AH=86h,INT 1A/AX=FF01h,INT 2F/AX=1224h,INT 62/AX=0096h --------g-E00000----------------------------- INT E0 - PCROBOTS v1.41 - "SWAPTASK" - END CURRENT ROBOT'S TURN AX = 0000h Program: PCROBOTS is P.D. Smith's adaptation of Tom Poindexter's CROBOTS, in which specially-written .COM or .EXE programs form robots battling each other in a user-defined arena --------g-E00001----------------------------- INT E0 - PCROBOTS v1.41 - "MOVEMENT" - START MOVING AX = 0001h BX = speed (0-maximum for robot) CX = direction (0-359 degrees) Notes: the speed will change to the specified value at the maximum acceleration the robot is capable of; if the robot is already moving faster than its maximum maneuverability speed, it will not be able to change direction this call also terminates the current robot's turn SeeAlso: AX=0000h,AX=0002h,AX=0003h --------g-E00002----------------------------- INT E0 - PCROBOTS v1.41 - "SCAN" - SCAN FOR OTHER ROBOTS IN THE GIVEN DIRECTION AX = 0002h BX = direction (0-359 degrees) CX = resolution (0-45 degrees) Return: AX = status FFFFh if nothing detected else robot ID (0-19) BX = range to detected robot Notes: the scan searches within CX degrees to either side of the specified direction the scanner will see right through walls, but shells will not pass through walls this call also terminates the current robot's turn SeeAlso: AX=0000h,AX=0001h,AX=0003h --------g-E00003----------------------------- INT E0 - PCROBOTS v1.41 - "SHOOT" - FIRE A SHELL AT ANOTHER ROBOT AX = 0003h BX = direction (0-359 degrees) CX = range (0-700) Return: AX = status (0000h not fired, else ID of shell fired) Notes: up to seven shells may be in flight for a robot at one time; the cannon takes 50 ticks to reload this call also terminates the current robot's turn SeeAlso: AX=0000h,AX=0001h,AX=0002h,AX=002Ch --------g-E00010----------------------------- INT E0 - PCROBOTS v1.41 - "GETXY" - GET ROBOT'S CURRENT POSITION AX = 0010h Return: BX = current X coordinate (0-999) CX = current Y coordinate (0-999) --------g-E00011----------------------------- INT E0 - PCROBOTS v1.41 - "TRANSMIT" - SEND DATA TO ANOTHER ROBOT AX = 0011h BX = target robot ID CX = data to be sent Return: AX = status (0000h data could not be sent, 0001h data sent) Note: this call costs one unit of battery power --------g-E00012----------------------------- INT E0 - PCROBOTS v1.41 - "RECEIVE" - GET DATA FROM OTHER ROBOTS AX = 0012h Return: AX = status 0000h no data available 0001h data retrieved BX = sender's ID CX = data Note: each robot has a 20-word receive FIFO; if the FIFO is full, other robots will be unable to send more data until some is read --------g-E00013----------------------------- INT E0 - PCROBOTS v1.41 - "DAMAGE" - DETERMINE HOW MUCH DAMAGE SUSTAINED AX = 0013h Return: BX = damage status Note: the initial value depends on configuration, but is typically 100; as the robot is damaged, it decreases --------g-E00014----------------------------- INT E0 - PCROBOTS v1.41 - "SPEED" - DETERMINE HOW FAST ROBOT IS MOVING AX = 0014h Return: BX = current speed --------g-E00015----------------------------- INT E0 - PCROBOTS v1.41 - "BATTERY" - DETERMINE HOW MUCH BATTERY POWER LEFT AX = 0015h Return: BX = current battery charge Note: the battery starts off with 1000 units of charge, and is constantly being charged by solar panels and constantly discharged by motion; the battery is charged at 4 units per turn and discharged at 0.1*speed units per turn. --------g-E00016----------------------------- INT E0 - PCROBOTS v1.41 - "TICKS" - DETERMINE HOW LONG SINCE GAME STARTED AX = 0016h Return: BX:CX = number of game ticks elapsed (not related to real time) --------g-E00017----------------------------- INT E0 - PCROBOTS v1.41 - "L_SIN" - GET SCALED SINE OF AN ANGLE AX = 0017h BX = angle (0-359 degrees) Return: BX:CX = 100000*sine of angle SeeAlso: AX=0018h,AX=0019h,AX=001Ah,AX=001Bh --------g-E00018----------------------------- INT E0 - PCROBOTS v1.41 - "L_COS" - GET SCALED COSINE OF AN ANGLE AX = 0018h BX = angle (0-359 degrees) Return: BX:CX = 100000*cosine of angle SeeAlso: AX=0017h,AX=0019h,AX=001Ah --------g-E00019----------------------------- INT E0 - PCROBOTS v1.41 - "L_TAN" - GET SCALED TANGENT OF AN ANGLE AX = 0019h BX = angle (0-359 degrees) Return: BX:CX = 100000*tangent of angle SeeAlso: AX=0017h,AX=0018h,AX=001Ah --------g-E0001A----------------------------- INT E0 - PCROBOTS v1.41 - "L_ATAN" - GET ANGLE GIVEN SCALED TANGENT AX = 001Ah BX:CX = 100000*tangent of an angle Return: AX = angle (-90 to +90 degrees) SeeAlso: AX=0017h,AX=0018h,AX=0019h --------g-E0001B----------------------------- INT E0 - PCROBOTS v1.41 - "SQRT" - DETERMINE SQUARE ROOT OF A NUMBER AX = 001Bh BX:CX = value Return: BX:CX = square root SeeAlso: AX=0017h --------g-E0001C----------------------------- INT E0 - PCROBOTS v1.41 - "SET_PATTERN" - SPECIFY ROBOT'S DISPLAY IMAGE AX = 001Ch BX:CX -> pattern array Note: the pattern array consists of five bytes, the low five bits of each specifying the bit pattern for one line of the robot's screen display --------g-E0001D----------------------------- INT E0 - PCROBOTS v1.41 - "DEBUG_FLAG" - SET/CLEAR MARKERS NEXT TO ROBOT'S NAME AX = 001Dh BX = flag number (0 or 1) CX = new value (0 reset, 1 set) Program: PCROBOTS is P.D. Smith's adaptation of Tom Poindexter's CROBOTS, in which specially-written .COM or .EXE programs form robots battling each other in a user-defined arena Note: the two flag markers may be used for any purpose, typically for debugging to provide a visual display of progress --------g-E0001E----------------------------- INT E0 - PCROBOTS v1.41 - "BUY_ARMOUR" - BUY OR SELL ARMOR FOR ROBOT AX = 001Eh BX = number of armor units to buy (negative to sell) Note: each armor unit is worth 50 battery units; the robot's armor rating will not go above its initial rating, so attempts to purchase more will waste battery units SeeAlso: AX=001Fh --------g-E0001F----------------------------- INT E0 - PCROBOTS v1.41 - "BUY_SHELLS" - BUY ADDITIONAL CANNON SHELLS AX = 001Fh BX = number of shells to buy Note: each shell costs ten battery units SeeAlso: AX=001Eh,AX=0020h --------g-E00020----------------------------- INT E0 - PCROBOTS v1.41 - "SHELLS LEFT" - DETERMINE HOW MANY SHELLS ROBOT HAS AX = 0020h Return: BX = number of shells remaining SeeAlso: AX=001Fh --------g-E00021----------------------------- INT E0 - PCROBOTS v1.41 - "GET LOCAL MAP" AX = 0021h BX:CX -> 81-byte buffer for map (see #2612) Return: buffer filled with 9x9 area of map centered on robot's position (Table 2612) Values for PCROBOTS map squares: 2Eh '.' empty square 44h 'D' damaging trap 52h 'R' refueling point 58h 'X' wall --------g-E00022----------------------------- INT E0 - PCROBOTS v1.41 - "INVISIBILITY" - CONTROL ROBOT'S INVISIBILITY DEVICE AX = 0022h BX = new state (0000h become visible, 0001h become invisible) Notes: this function has no effect if the robot is not capable of invisibility the robot can only stay invisible for 100 turns, after which it will automatically become visible; it must also be remain visible for as many turns as it was invisible before it can turn invisible again SeeAlso: AX=0024h,AX=0080h --------g-E00023----------------------------- INT E0 - PCROBOTS v1.41 - "GET_SHELL_STATUS" - FIND OUT WHAT HAPPENED TO SHELL AX = 0023h Return: BX = status of last shell to land 0000h missed completely 0001h hit a wall 0002h hit a robot within 50-square radius 0003h hit a robot within 25-square radius 0004h hit a robot within 5-square radius --------g-E00024----------------------------- INT E0 - PCROBOTS v1.41 - "IS_INVISIBLE" - DETERMINE WHETHER ROBOT IS INVISIBLE AX = 0024h Return: BX = visibility (0000h visible, 0001h invisible) SeeAlso: AX=0022h,AX=0080h --------g-E00025----------------------------- INT E0 - PCROBOTS v1.41 - "L_ATAN2" - GET ARCTANGENT AX = 0025h BX = Y CX = X Return: AX = angle (arctangent of Y/X) --------g-E00026----------------------------- INT E0 - PCROBOTS v1.41 - "GET_ROBOT_ID" - DETERMINE CURRENT ROBOT'S IDENTIFIER AX = 0026h Return: AX = robot ID --------g-E00027----------------------------- INT E0 - PCROBOTS v1.41 - "REGISTER_IFF" - REGISTER FRIEND/FOE IDENT STRING AX = 0027h BX:CX = ASCIZ IFF string Note: the IFF string may only be set once SeeAlso: AX=0028h,AX=0029h --------g-E00028----------------------------- INT E0 - PCROBOTS v1.41 - "CHECK_IFF" - QUERY FRIEND/FOE IDENTIFICATION STRING AX = 0028h BX = robot ID to test Return: AX = status 0000h IFF strings match 0001h IFF strings differ or invalid robot ID SeeAlso: AX=0027h --------g-E00029----------------------------- INT E0 - PCROBOTS v1.41 - "REGISTER_NAME" - SPECIFY ROBOT'S NAME AX = 0029h BX:CX -> ASCIZ name string Note: the name may only be set once SeeAlso: AX=0027h,AX=002Ah --------g-E0002A----------------------------- INT E0 - PCROBOTS v1.41 - "FIND_NAME" - SEARCH FOR ROBOT WITH GIVEN NAME AX = 002Ah BX:CX -> ASCIZ name string DX = first ID to check Return: AX = robot ID or FFFFh if no robot with specified name SeeAlso: AX=0028h,AX=0029h,AX=002Bh --------g-E0002B----------------------------- INT E0 - PCROBOTS v1.41 - "GET_TEAM_ID" - DETERMINE TEAM MEMBERSHIP OF ROBOT AX = 002Bh Return: AX = team ID (0-2) or FFFFh if 'loner' SeeAlso: AX=0029h --------g-E0002C----------------------------- INT E0 - PCROBOTS v1.41 - "GET_ASHELL_STATUS" - FIND OUT WHAT HAPPENED TO SHELL AX = 002Ch BX = shell ID Return: AX = status 0000h missed completely 0001h hit a wall 0002h hit a robot within a 50-square radius 0003h hit a robot within a 25-square radius 0004h hit a robot within a 5-square radius 0005h shell not known (too old or not yet fired) 0006h shell still in flight SeeAlso: AX=0003h --------g-E0002D----------------------------- INT E0 - PCROBOTS v1.41 - "REGISTER_X" - SELECT AUTOMATIC X POSITION UPDATES AX = 002Dh BX:CX -> X word variable Return: AX = status (0001h OK, 0000h problem with address) Note: after this call, PCROBOTS will automatically update the specified word whenever the robot moves SeeAlso: AX=002Eh --------g-E0002E----------------------------- INT E0 - PCROBOTS v1.41 - "REGISTER_Y" - SELECT AUTOMATIC Y POSITION UPDATES AX = 002Eh BX:CX -> Y word variable Return: AX = status (0001h OK, 0000h problem with address) Note: after this call, PCROBOTS will automatically update the specified word whenever the robot moves SeeAlso: AX=002Dh --------g-E00080----------------------------- INT E0 - PCROBOTS v1.41 - "CONFIGURE" - CUSTOMIZE ROBOT AX = 0080h BX = basic configuration (see #2613) CX = advanced configuration (see #2614) Return: AX = status (0001h OK, 0000h not first call in program) Program: PCROBOTS is P.D. Smith's adaptation of Tom Poindexter's CROBOTS, in which specially-written .COM or .EXE programs form robots battling each other in a user-defined arena Notes: a maximum of ten points may be allocated to the robot; if you attempt to allocate more, some items will be given a value of zero. If this function is not called, each attribute is set to the default value of 2. if the invisibility option is chosen, the robot will start with only 900 cannon shells instead of the default 1000 Bitfields for PCROBOTS basic configuration: Bit(s) Description (Table 2613) 0-3 maximum speed (0-4 = 50,75,100,150,200) 4-7 maneuverability (0-4 = 20%,35%,50%,75%,100%) 8-11 cannon range (0-4 = 300,500,700,1000,1500) 12-15 robot armor (0-4 = 50,75,100,150,200) Bitfields for PCROBOTS advanced configuration: Bit(s) Description (Table 2614) 0-2 robot acceleration (0-4 = 5,7,10,15,20) 3 capable of invisibility --------r-E1--------------------------------- INT E1 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------N-E1--------------------------------- INT E1 - PC Cluster Disk Server Information (NOT A VECTOR!) Desc: points at a data table SeeAlso: INT E2 --------O-E1--------------------------------- INT E1 - MP/M-86, - ALTERNATE CP/M-86 FUNCTION CALLS CL = function number (see #2602,#2603 at INT E0"CP/M") DS,DX = parameters Return: as appropriate for function CX is often the error code (see #2604 at INT E0"CP/M") Desc: used by some applications which alter CP/M functions while running a child program, to store the original INT E0 vector before intercepting INT E0 SeeAlso: INT E0"CP/M" ----------E1--------------------------------- INT E1 - DeskMate (Tandy) - TASK DATA SEGMENTS (NOT A VECTOR!) Desc: used to store data; the low word of the vector is the data segment for the first task; the high word is the data segment of the second task (DeskMate supports 2-way task switching between small- or medium-model applications) Program: DeskMate is a proprietary GUI from Tandy distributed with several models of the Tandy 1000's, 2500's, 3000's, and laptops. Retail and runtime versions also exist. Some Tandy's are designed to boot directly into DeskMate. SeeAlso: INT E0"DeskMate" --------r-E2--------------------------------- INT E2 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------N-E2--------------------------------- INT E2 - PC Cluster Program - RELOCATED INT 1C SeeAlso: INT 1C --------r-E3--------------------------------- INT E3 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-E40005----------------------------- INT E4 - Logitech Modula v2.0 - MonitorEntry AX = 0005h BX = priority SeeAlso: AX=0006h --------r-E40006----------------------------- INT E4 - Logitech Modula v2.0 - MonitorExit AX = 0006h SeeAlso: AX=0005h --------r-E4--------------------------------- INT E4 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-E5--------------------------------- INT E5 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-E6--------------------------------- INT E6 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------O-E600------------------------------- INT E6 - Linux DOSEMU - INSTALLATION CHECK AH = 00h Return: AX = AA55h if installed BX = DOSEMU version number * 100 (decimal) CX = patchlevel SeeAlso: AH=FFh --------O-E601------------------------------- INT E6 - Linux DOSEMU - REGISTER DUMP AH = 01h SeeAlso: AH=00h --------O-E602------------------------------- INT E6 - Linux DOSEMU - SET I/O PORT PERMISSIONS AH = 02h BX = base I/O port address CX = number of consecutive I/O ports CF set to allow DOS to use ports CF clear if DOS should not be allowed to use ports SeeAlso: AH=00h --------O-E605------------------------------- INT E6 - Linux DOSEMU - STARTUP BANNER AH = 05h SeeAlso: AH=00h --------O-E612------------------------------- INT E6 - Linux DOSEMU - SET "HOGTHRESHOLD" AH = 12h BX = new "hogthreshold" (00h-99h) Desc: specify how much CPU time DOSEMU may use SeeAlso: AH=00h --------O-E622------------------------------- INT E6 - Linux DOSEMU - GET EMS STATUS AH = 22h SeeAlso: AH=00h --------O-E630------------------------------- INT E6 - Linux DOSEMU - SET BOOTDISK FLAG AH = 30h BX = new flag state (0 = false, 1 = true) SeeAlso: AH=00h --------O-E650------------------------------- INT E6 - Linux DOSEMU - EXECUTE UNIX COMMAND AH = 50h ES:DX -> ASCIZ Unix command SeeAlso: AH=00h,AH=51h --------O-E651------------------------------- INT E6 - Linux DOSEMU - EXECUTE DOS COMMAND FROM UNIX AH = 51h ES:DX -> ASCIZ DOS command SeeAlso: AH=00h,AH=50h --------O-E680------------------------------- INT E6 - Linux DOSEMU - GET CURRENT UNIX DIRECTORY AH = 80h Return: ES:DX -> current Unix directory AX = length of current directory name SeeAlso: AH=00h,AH=81h --------O-E681------------------------------- INT E6 - Linux DOSEMU - CHANGE CURRENT UNIX DIRECTORY AH = 81h ES:DX -> ASCIZ directory name SeeAlso: AH=00h,AH=80h --------O-E6FF------------------------------- INT E6 - Linux DOSEMU - TERMINATE AH = FFh SeeAlso: AH=00h --------r-E7--------------------------------- INT E7 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-E8--------------------------------- INT E8 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination --------r-E9--------------------------------- INT E9 - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-EA--------------------------------- INT EA - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-EB--------------------------------- INT EB - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------r-EC--------------------------------- INT EC - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC BASIC.COM/BASICA.COM do not restore vector on termination --------N-EC--------------------------------- INT EC - used by Alloy NTNX --------r-EC--------------------------------- INT EC - Exact - RUNTIME INTERFACE MULTIPLEXOR AX = function number (0000h to 0140h) STACK: DWORD address to return to any arguments required by function Return: STACK: return address popped, but otherwise unchanged Desc: this is the interface from applications to the runtime system by Exact Automatisering B.V. of the Netherlands. By using this interrupt, it can provide DLL-style capabilities under MS-DOS. Note: the interrupt handler removes the return address and flags placed on the stack by the INT EC, then jumps to the appropriate function --------r-ED--------------------------------- INT ED - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination INT 80 through INT ED are modified but not restored by Direct Access v4.0, and may be left dangling by other programs written with the same version of compiled BASIC SeeAlso: INT EC"BASIC",INT EE"BASIC" --------r-EE--------------------------------- INT EE - IBM ROM BASIC - used while in interpreter Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT ED"BASIC",INT EE"BASIC" --------r-EF--------------------------------- INT EF - BASIC - ORIGINAL INT 09 VECTOR Note: BASIC.COM/BASICA.COM do not restore vector on termination SeeAlso: INT EE"BASIC",INT F0"BASIC" --------O-EF----CX0473----------------------- INT EF - GEM - INTERFACE CX = 0473h DS:DX -> GEM parameter block --------r-F0--------------------------------- INT F0 - BASICA.COM, GWBASIC, compiled BASIC - ORIGINAL INT 08 VECTOR Note: BASICA.COM does not restore vector on termination SeeAlso: INT EF"BASIC" --------*-F1--------------------------------- INT F1 - reserved for user interrupt --------s-F1--------------------------------- INT F1 - SPEECH.COM - CONVERT TEXT STRING TO SPEECH DS:BX -> '$'-terminated text string Program: SPEECH.COM is a resident text-to-speech converter by Douglas Sisco --------s-F1--------------------------------- INT F1 - Andy C. McGuire SPEECH.COM/SAY.COM SeeAlso: INT F2"SPEECH" --------U-F1--------------------------------- INT F1 - AQUEDUCT, PIPELINE - GET DATA AREA ADDRESS Return: AX:BX -> data area Program: AQUEDUCT and PIPELINE are TSRs by James W. Birdsall to connect COM1 and COM2 in software Note: The installation check consists of testing for the following signature immediately preceding the interrupt handler: "JWBtvv" where 't' is either "A" for AQUEDUCT or "P" for PIPELINE and "vv" is a two-digit version number Index: installation check;AQUEDUCT|installation check;PIPELINE --------N-F1--------------------------------- INT F1 - NetWare Remote Boot - INSTALLATION CHECK (NOT A VECTOR!) Note: if this vector contains the value 5774654Eh ("NetW"), the remote boot BIOS extension is active, and access to the floppy disk is redirected to an image file in the server's SYS:LOGIN directory SeeAlso: INT F2"NetWare",INT F3"NetWare",INT F4"NetWare" --------v-F1--------------------------------- INT F1 - VIRUS - "Violetta" - ??? Note: used but not chained by virus SeeAlso: INT E0"VIRUS",INT FF"VIRUS" ----------F101------------------------------- INT F1 - Common ISDN API (CAPI) v1.1 - "API-REGISTER" - INITIALIZE CAPI AH = 01h ES:BX -> buffer for CAPI's use (see note) CX = minimum number of pending messages DX = maximum simultaneous Level 3 connections SI = maximum concurrent received B3 data blocks DI = maximum B3 data block size Return: AX = CAPI-assigned application ID 0000h on error BX = error number 1001h registration error Range: INT 00 to INT FF, selectable by program parameter Notes: the caller is required to provide at least 512 bytes of stack space the CAPI interrupt handler begins with a header which is nearly identical to the IBM Interrupt Sharing Protocol header (see #1363 at INT 2D), except that the short jump instruction to a hardware reset handler at offset 09h is replaced by the signature bytes "IA" the maximum length of a message is fixed at 180 bytes; the standard document suggests using CX=10, DI=1, SI=7, and DI=130 for applications which use only a single connection and standard protocols the total size of the application-provided buffer must be at least 180*CX + DX*SI*DI bytes SeeAlso: AH=02h,INT F1/AL=01h Index: installation check;Common ISDN API ----------F1--01----------------------------- INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_REGISTER" - INITIALIZE CAPI AL = 01h AH = CAPI version number * 10 (14h for v2.0) ES:BX -> buffer for CAPI's use (see note) CX = number of bytes for message buffer DX = maximum simultaneous logical (Level 3) connections SI = maximum concurrent received B3 data blocks (min. 2) DI = maximum B3 data block size (up to 2048 bytes) Return: AX = CAPI-assigned application ID 0000h on error BX = error number 1001h registration error Range: INT 00 to INT FF, selectable by program parameter Notes: the caller is required to provide at least 512 bytes of stack space the CAPI interrupt handler begins with a header (see #2615) which is nearly identical to the IBM Interrupt Sharing Protocol header (see #1363 at INT 2D), except that the short jump instruction to a hardware reset handler at offset 09h is replaced by the signature bytes "IA" the standard document suggests using 1024 + (1024*DX) bytes for the message buffer for typical applications the total size of the application-provided buffer must be at least CX + DX*SI*DI bytes SeeAlso: AH=01h,INT F1/AL=02h Index: installation check;Common ISDN API Format of CAPI v2.0 interrupt handler entry point: Offset Size Description (Table 2615) 00h 2 BYTEs short jump to actual start of interrupt handler, immediately following this data block (EBh 0Fh) 02h DWORD address of next handler in chain 06h WORD signature 424Bh 08h BYTE EOI flag (80h) 80h primary hardware interrupt handler (will issue EOI) 09h 2 BYTEs reserved (0) (is short jump to hardware reset routine in ISP header) 0Bh 4 BYTEs signature "CAPI" 0Fh 2 BYTEs two-digit CAPI version number in ASCII ('20') SeeAlso: #1363 at INT 2D ----------F102------------------------------- INT F1 - Common ISDN API (CAPI) v1.1 - "API-RELEASE" - UNREGISTER FROM CAPI AH = 02h DX = application ID (see AH=01h) Return: AX = status (0000h,1002h) (see #2657) Notes: the caller is required to provide at least 512 bytes of stack space SeeAlso: AH=01h,INT F1/AL=02h (Table 2657) Values for CAPI v1.1 error code: 0000h successful 1001h registration error 1002h invalid application ID 1003h message too small or incorrectly coded message number 1004h invalid command or subcommand 1005h message queue full 1006h message queue empty 1007h message(s) lost due to queue overflow 1008h error uninstalling SeeAlso: #2660 ----------F1--02----------------------------- INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_RELEASE" - UNREGISTER FROM CAPI AL = 02h AH = CAPI version number * 10 (14h for v2.0) DX = application ID (see INT F1/AL=01h) Return: AX = status (0000h,11xxh) (see #2660) Notes: the caller is required to provide at least 512 bytes of stack space SeeAlso: AH=02h,INT F1/AL=01h,INT F1/AL=03h (Table 2660) Values for CAPI v2.0 error code: 0000h successful 1001h too many applications 1002h logical block size too small (must be at least 128 bytes) 1003h buffer > 64K 1004h message buffer too small (minimum 1024 bytes) 1005h too many logical connections requested 1006h reserved 1007h could not register because CAPI busy, try again 1008h OS resource unavailable (out of memory, etc.) 1009h COMMON-ISDN-API not installed 100Ah controller does not support external equipment 100Bh controller supports only external equipment 1101h invalid application ID 1102h illegal comand or subcommand, or message too short 1103h message queue full 1104h queue empty 1105h queue overflowed (message lost) 1106h unknown notification parameter 1107h could not accept message because CAPI busy, try again 1108h OS resource unavailable (out of memory, etc.) 1109h COMMON-ISDN-API not installed 110Ah controller does not support external equipment 110Bh controller supports only external equipment 2001h message not supported in current state 2002h illegal controller/PLCI/NCCI 2003h out of PLCI 2004h out of NCCI 2005h out of LISTEN 2006h out of FAX resources (T.30 protocol) 2007h illegal message parameter coding 3001h unsupported B1 protocol 3002h unsupported B2 protocol 3003h unsupported B3 protocol 3004h unsupported B1 protocol parameter 3005h unsupported B2 protocol parameter 3006h unsupported B3 protocol parameter 3007h unsupported B protocol combination 3008h NCPI not supported 3009h unknown CIP value 300Ah unsupported flags (reserved bits set) 300Bh unsupported facility 300Ch data length not supported by current protocol 300Dh reset procedure not supported by current protocol SeeAlso: #2657 ----------F103------------------------------- INT F1 - Common ISDN API (CAPI) v1.1 - "API-PUT-MESSAGE" AH = 03h DX = application ID (see AH=01h) ES:BX -> message to be sent (see #2658) Return: AX = status (0000h,1002h,1003h,1004h,1005h) (see #2657) Notes: the caller is required to provide at least 512 bytes of stack space the message buffer may be reused as soon as this call returns SeeAlso: AH=01h,AH=04h,INT F1/AL=03h Format of CAPI message: Offset Size Description (Table 2658) 00h WORD total message length, including header 02h WORD application ID (see AH=01h) 04h BYTE command (see #2659,#2661) 05h BYTE subcommand (see #2659,#2661) 06h WORD message sequence number 0000h-7FFFh messages from application to CAPI (and replies) 8000h-FFFFh messages from CAPI to application (and replies) 08h var message data (max 172 bytes for v1.1 only) (Table 2659) Values for CAPI v1.1 message command/subcommand: Cmd/SubCmd Name Description 01h/00h RESET-B3-REQ request resetting of a Level 3 connection 01h/01h RESET-B3-CONF confirm Level 3 connection reset 01h/02h RESET-B3-IND indication from CAPI that Level 3 conn. reset 01h/03h RESET-B3-RESP confirm receipt of RESET-B3-IND 02h/00h CONNECT-REQ establish B-channel connection 02h/01h CONNECT-CONF confirm start of connection establishment 02h/02h CONNECT-IND indication from CAPI of incoming connection 02h/03h CONNECT-RESP accept incoming connection 03h/02h CONNECT-ACTIVE-IND indication that B-channel connection complete 03h/03h CONNECT-ACTIVE-RESP confirm connection-complete indication 04h/00h DISCONNECT-REQ request shutdown of B-channel connection 04h/01h DISCONNECT-CONF confirm shutdown of B-channel connection 04h/02h DISCONNECT-IND indication that B-channel is shutting down 04h/03h DISCONNECT-RESP confirm that application knows of shutdown 05h/00h LISTEN-REQ enable indication of incoming connections 05h/01h LISTEN-CONF confirm enabling of incoming conn. indication 06h/00h GET-PARAMS-REQ request B-channel parameters 06h/01h GET-PARAMS-CONF return B-channel parameters 07h/00h INFO-REQ set B-channel info to be signalled to app 07h/01h INFO-CONF confirm B-channel info signalling 07h/02h INFO-IND signal B-channel events to application 07h/03h INFO-CONF confirm receipt of INFO-IND 08h/00h DATA-REQ send D-channel data 08h/01h DATA-CONF confirm receipt of DATA-REQ 08h/02h DATA-IND receive D-channel data 08h/03h DATA-RESP confirm receipt fo DATA-IND 09h/00h CONNECT-INFO-REQ request connection information 09h/01h CONNECT-INFO-CONF return connection information 40h/00h SELECT-B2-PROTOCOL-REQ select Level 2 protocol 40h/01h SELECT-B2-PROTOCOL-CONF confirm receipt of SELECT-B2-PROTOCOL-REQ 80h/00h SELECT-B3-PROTOCOL-REQ select Level 3 protocol 80h/01h SELECT-B3-PROTOCOL-CONF confirm receipt of SELECT-B3-PROTOCOL-REQ 81h/00h LISTEN-B3-REQ enable notification of incoming Level 3 calls 81h/01h LISTEN-B3-CONF confirm receipt of LISTEN-B3-REQ 82h/00h CONNECT-B3-REQ establish Level 3 connection 82h/01h CONNECT-B3-CONF confirm start of connection establishment 82h/02h CONNECT-B3-IND indication of incoming Level 3 connection 82h/03h CONNECT-B3-RESP accept incoming connection 83h/02h CONNECT-B3-ACTIVE-IND indication that Level 3 connection complete 83h/03h CONNECT-B3-ACTIVE-RESP confirm connection-complete indication 84h/00h DISCONNECT-B3-REQ request shutdown of Level 3 connection 84h/01h DISCONNECT-B3-CONF confirm shutdown of Level 3 connection 84h/02h DISCONNECT-B3-IND indication that Level 3 is shutting down 84h/03h DISCONNECT-B3-RESP confirm that application knows of shutdown 85h/00h GET-B3-PARAMS-REQ request Level 3 parameters 85h/01h GET-B3-PARAMS-CONF return Level 3 parameters 86h/00h DATA-B3-REQ send data on Level 3 86h/01h DATA-B3-CONF confirm sending of Level 3 data 86h/02h DATA-B3-IND indication of incoming Level 3 data 86h/03h DATA-B3-RESP confirm receipt of Level 3 data 87h/02h HANDSET-IND indication of Handset events 87h/03h HANDSET-RESP confirm receipt of Handset event FFh/00h MANUFACTURER-REQ vendor-specific request FFh/01h MANUFACTURER-CONF vendor-specific request confirmation FFh/02h MANUFACTURER-IND vendor-specific notification FFh/03h MANUFACTURER-RESP vendor-specific notification confirmation SeeAlso: #2658,#2661 ----------F1--03----------------------------- INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_PUT_MESSAGE" AL = 03h AH = CAPI version number * 10 (14h for v2.0) DX = application ID (see INT F1/AL=01h) ES:BX -> message to be sent (see #2658) Return: AX = status (0000h,11xxh) (see #2660) Notes: the caller is required to provide at least 512 bytes of stack space the message buffer may be reused as soon as this call returns SeeAlso: AH=03h,INT F1/AL=01h,INT F1/AL=04h (Table 2661) Values for CAPI v2.0 message command/subcommand: Cmd/SubCmd Name Description 01h/80h ALERT_REQ indicate compatibility with incoming calls 01h/81h ALERT_CONF confirm receipt of ALERT_REQ 02h/80h CONNECT_REQ establish B-channel connection 02h/81h CONNECT_CONF confirm start of connection establishment 02h/82h CONNECT_IND indication from CAPI of incoming connection 02h/83h CONNECT_RESP accept incoming connection 03h/82h CONNECT_ACTIVE_IND indication that B-channel connection complete 03h/83h CONNECT_ACTIVE_RESP confirm connection-complete indication 04h/80h DISCONNECT_REQ request shutdown of B-channel connection 04h/81h DISCONNECT_CONF confirm shutdown of B-channel connection 04h/82h DISCONNECT_IND indication that B-channel is shutting down 04h/83h DISCONNECT_RESP confirm that application knows of shutdown 05h/80h LISTEN_REQ enable signalling on incoming events 05h/81h LISTEN_CONF confirm enabling of incoming event signalling 08h/80h INFO_REQ send protocol information for physical connect 08h/81h INFO_CONF confirm INFO_REQ 08h/82h INFO_IND indicate event for physical connection 08h/83h INFO_CONF confirm receipt of INFO_IND 41h/80h SELECT_B_PROTOCOL_REQ change protocol on already-active connect 41h/81h SELECT_B_PROTOCOL_CONF confirm receipt of SELECT_B_PROTOCOL_REQ 80h/80h FACILITY_REQ control optional facilities 80h/81h FACILITY_CONF confirm acceptance of FACILITY_REQ 80h/82h FACILITY_IND indicate facility-dependent event 80h/83h FACILITY_RESP confirm receipt of FACILITY_IND 82h/80h CONNECT_B3_REQ establish Level 3 connection 82h/81h CONNECT_B3_CONF confirm start of connection establishment 82h/82h CONNECT_B3_IND indication of incoming Level 3 connection 82h/83h CONNECT_B3_RESP accept incoming connection 83h/82h CONNECT_B3_ACTIVE_IND indication that Level 3 connection complete 83h/83h CONNECT_B3_ACTIVE_RESP confirm connection-complete indication 84h/80h DISCONNECT_B3_REQ request shutdown of Level 3 connection 84h/81h DISCONNECT_B3_CONF confirm shutdown of Level 3 connection 84h/82h DISCONNECT_B3_IND indication that Level 3 is shutting down 84h/83h DISCONNECT_B3_RESP confirm that application knows of shutdown 85h/80h GET_B3_PARAMS_REQ request Level 3 parameters 85h/81h GET_B3_PARAMS_CONF return Level 3 parameters 86h/80h DATA_B3_REQ send data on Level 3 86h/81h DATA_B3_CONF confirm sending of Level 3 data 86h/82h DATA_B3_IND indication of incoming Level 3 data 86h/83h DATA_B3_RESP confirm receipt of Level 3 data 87h/80h RESET_B3_REQ request resetting of a logical connection 87h/81h RESET_B3_CONF confirm logical connection reset 87h/82h RESET_B3_IND indication from CAPI that logical conn. reset 87h/83h RESET_B3_RESP confirm receipt of RESET_B3_IND 88h/82h CONNECT_B3_T90_ACTIVE_IND indicate switch from T.70 to T.90 88h/83h CONNECT_B3_T90_ACTIVE_RESP confirm receipt of T90_ACTIVE_IND FFh/80h MANUFACTURER_REQ vendor-specific request FFh/81h MANUFACTURER_CONF vendor-specific request confirmation FFh/82h MANUFACTURER_IND vendor-specific notification FFh/83h MANUFACTURER_RESP vendor-specific notification confirmation SeeAlso: #2658,#2659 ----------F104------------------------------- INT F1 - Common ISDN API (CAPI) v1.1 - "API-GET-MESSAGE" AH = 04h DX = application ID (see AH=01h) Return: AX = status (0000h,1002h,1006h,1007h) (see #2657) ES:BX -> message if successful (see #2658) Range: INT 00 to INT FF, selectable by program parameter Notes: the caller is required to provide at least 512 bytes of stack space the returned message may be overwritten by the next call to this function SeeAlso: AH=03h ----------F1--04----------------------------- INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_GET_MESSAGE" AL = 04h AH = CAPI version number * 10 (14h for v2.0) DX = application ID (see AH=01h) Return: AX = status (0000h,11xxh) (see #2660) ES:BX -> message if successful (see #2658) Range: INT 00 to INT FF, selectable by program parameter Notes: the caller is required to provide at least 512 bytes of stack space the returned message may be overwritten by the next call to this function SeeAlso: AH=04h,INT F1/AL=03h ----------F105------------------------------- INT F1 - Common ISDN API (CAPI) v1.1 - "API-SET-SIGNAL" - SIGNAL HANDLING AH = 05h DX = application ID (see AH=01h) ES:BX -> signal handler or 0000h:0000h to disable Return: AX = status (0000h,1002h) (see #2657) Notes: the caller is required to provide at least 512 bytes of stack space the signal handler is called as though it were an interrupt, with interrupts disabled; the handler must preserve all registers and return with an IRET SeeAlso: AH=01h ----------F1--05----------------------------- INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_SET_SIGNAL" - SIGNAL HANDLING AL = 05h AH = CAPI version number * 10 (14h for v2.0) DX = application ID (see AH=01h) ES:BX -> signal handler or 0000h:0000h to disable SI:DI = parameter to pass to signal handler Return: AX = status (0000h,11xxh) (see #2660) Notes: the caller is required to provide at least 512 bytes of stack space the signal handler is called as though it were an interrupt, with interrupts disabled and DX,SI,DI set as they were when this function was called; the handler must preserve all registers and return with an IRET the signal handler may call CAPI_PUT_MESSAGE, CAPI_GET_MESSAGE, and CAPI_SET_SIGNAL SeeAlso: INT F1/AL=01h ----------F106------------------------------- INT F1 - Common ISDN API (CAPI) v1.1 - "API-DEINSTALL" - UNINSTALL AH = 06h BX = force flag 0000h normal uninstall 0001h forced uninstall Return: AX = status (0000h,1008h) (see #2657) Desc: reset ISDN controller, close all ISDN Level 1 connections except for telephone connections Notes: the caller is required to provide at least 512 bytes of stack space ----------F1F0------------------------------- INT F1 - Common ISDN API (CAPI) v1.1 - "API-GET-MANUFACTURER" AH = F0h ES:BX -> 64-byte buffer for manufacturer identification information Return: ES:BX buffer filled with ASCIZ idnetification string Range: INT 00 to INT FF, selectable by program parameter Notes: the caller is required to provide at least 512 bytes of stack space SeeAlso: AH=01h,AH=F1h,AH=F2h,AH=FFh,INT F1/AL=F0h ----------F1--F0----------------------------- INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_GET_MANUFACTURER" AL = F0h AH = CAPI version number * 10 (14h for v2.0) ES:BX -> 64-byte buffer for manufacturer identification information Return: ES:BX buffer filled with ASCIZ idnetification string Range: INT 00 to INT FF, selectable by program parameter Notes: the caller is required to provide at least 512 bytes of stack space SeeAlso: AH=F0h,INT F1/AL=01h,INT F1/AL=F1h,INT F1/AL=F2h,INT F1/AL=FFh ----------F1F1------------------------------- INT F1 - Common ISDN API (CAPI) v1.1 - "API-GET-VERSION" AH = F1h ES:BX -> 64-byte buffer for CAPI version number Return: ES:BX buffer filled with ASCIZ version string Notes: the caller is required to provide at least 512 bytes of stack space SeeAlso: AH=01h,AH=F0h,AH=F2h,AH=FFh ----------F1--F1----------------------------- INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_GET_VERSION" AL = F1h AH = CAPI version number * 10 (14h for v2.0) Return: AH = CAPI major version number AL = CAPI minor version number DH = vendor-specific major version DL = vendor-specific minor version Notes: the caller is required to provide at least 512 bytes of stack space SeeAlso: AH=F1h,INT F1/AL=01h,INT F1/AL=F0h,INT F1/AL=F2h,INT F1/AL=FFh ----------F1F2------------------------------- INT F1 - Common ISDN API (CAPI) v1.1 - "API-GET-SERIAL-NUMBER" AH = F2h ES:BX -> 64-byte buffer for CAPI serial number Return: ES:BX buffer filled with ASCIZ serial number (seven digits), empty string if no serial number Notes: the caller is required to provide at least 512 bytes of stack space SeeAlso: AH=01h,AH=F0h,AH=F1h,AH=FFh ----------F1--F2----------------------------- INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_GET_SERIAL_NUMBER" AL = F2h AH = CAPI version number * 10 (14h for v2.0) ES:BX -> 64-byte buffer for CAPI serial number Return: ES:BX buffer filled with ASCIZ serial number (seven digits), empty string if no serial number Notes: the caller is required to provide at least 512 bytes of stack space SeeAlso: AH=F2h,INT F1/AL=01h,INT F1/AL=F0h,INT F1/AL=F1h,INT F1/AH=F3h ----------F1--F3----------------------------- INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_GET_PROFILE" - GET CAPABILITIES AL = F3h AH = CAPI version number * 10 (14h for v2.0) ES:BX -> 64-byte buffer for CAPI capabilities (see #2662) CX = controller number (01h-06h) or 0000h to get number of controllers Return: AX = status (0000h,11xxh) (see #2660) ES:BX buffer filled if successful Notes: the caller is required to provide at least 512 bytes of stack space SeeAlso: INT F1/AL=01h,INT F1/AL=F0h,INT F1/AL=F2h,INT F1/AH=FFh Format of CAPI v2.0 capabilities: Offset Size Description (Table 2662) 00h WORD number of installed controllers 02h WORD number of supported B channels 04h DWORD global options (see #2663) 08h DWORD B1 protocol support flags (see #2664) 0Ch DWORD B2 protocol support flags (see #2665) 10h DWORD B3 protocol support flags (see #2666) 14h 24 BYTEs reserved for CAPI use 2Ch 20 BYTEs vendor-specific information Bitfields for CAPI v2.0 global options: Bit(s) Description (Table 2663) 0 internal controller supported 1 external controller supported 2 handset supported (only if bit 1 also set) 3 DTMF supported 4-31 reserved (0) SeeAlso: #2662 Bitfields for CAPI v2.0 B1 protocol support: Bit(s) Description (Table 2664) 0 64k bps with HDLC framing (required, always set) 1 64k bps bit-transparent operation with network byte framing 2 V.110 asynchronous with start/stop byte framing 3 V.110 synchronous with HDLC framing 4 T.30 modem for group 3 FAX 5 64k bps inverted with HDLC framing 6 56k bps bit-transparent operation with network byte framing 7-31 reserved (0) SeeAlso: #2662 Bitfields for CAPI v2.0 B2 protocol support: Bit(s) Description (Table 2665) 0 ISO 7776 (X.75 SLP) (required, always set) 1 transparent 2 SDLC 3 Q.921 LAPD (D-channel X.25) 4 T.30 for group 3 FAX 5 point-to-point protocol (PPP) 6 transparent (ignoring B1 framing errors) 7-31 reserved (0) SeeAlso: #2662 Bitfields for CAPI v2.0 B3 protocol support: Bit(s) Description (Table 2666) 0 transparent (required, always set) 1 T.90NL with T.70NL compatibility 2 ISO 8208 (X.25 DTE-DTE) 3 X.25 DCE 4 T.30 for group 3 FAX 5-31 reserved (0) SeeAlso: #2662 ----------F1FF------------------------------- INT F1 - Common ISDN API (CAPI) v1.1 - "API-MANUFACTURER" - VENDOR-SPECIFIC AH = FFh other registers vendor-specific Return: registers vendor-specific Range: INT 00 to INT FF, selectable by program parameter Notes: the caller is required to provide at least 512 bytes of stack space SeeAlso: AH=01h,AH=F0h,AH=F1h,AH=F2h,INT F1/AH=FFh ----------F1--FF----------------------------- INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_MANUFACTURER" - VENDOR-SPECIFIC AL = FFh AH = CAPI version number * 10 (14h for v2.0) other registers vendor-specific Return: registers vendor-specific Range: INT 00 to INT FF, selectable by program parameter Notes: the caller is required to provide at least 512 bytes of stack space SeeAlso: AH=FFh,INT F1/AL=01h,INT F1/AL=F0h,INT F1/AL=F1h,INT F1/AL=F2h --------*-F2--------------------------------- INT F2 - reserved for user interrupt --------s-F2--------------------------------- INT F2 - Andy C. McGuire SPEECH.COM/SAY.COM SeeAlso: INT F1"SPEECH" --------N-F2--------------------------------- INT F2 - NetWare Remote Boot - ORIGINAL INT 13 SeeAlso: INT F1"NetWare",INT F3"NetWare",INT F4"NetWare" ----------F2--------------------------------- INT F2 - ICCTSR 1.0 - ImageCapture COLOR Developer's Kit - API AH = function number (see #2616) ??? Return: ??? Program: ImageCapture is a product of International Computers SeeAlso: INT F3"ICCTSR" (Table 2616) Values for ImageCapture function: 01h power up 02h power down 03h set controls 04h capture image 05h display image 06h read file 07h write file 08h write array 09h read pixel 0Ah write pixel 0Bh check if VGA present 0Ch set video mode 0Dh check for keystroke 0Eh delay --------*-F3--------------------------------- INT F3 - reserved for user interrupt --------s-F3--------------------------------- INT F3 - SoundBlaster - POINTER TO ECHO VALUE Note: this is not a vector, but a pointer to a DWORD containing the echo value selected with SET-ECHO.EXE SeeAlso: INT 2F/AX=FBFBh ----------F3--------------------------------- INT F3 - ICCTSR 1.0 - HANDSHAKE ID VECTOR Program: ImageCapture is a product of International Computers SeeAlso: INT F2"ICCTSR" --------N-F3--------------------------------- INT F3 - NetWare Remote Boot - BOOT ROM'S INT 13 HANDLER SeeAlso: INT F1"NetWare",INT F2"NetWare",INT F4"NetWare" --------*-F4--------------------------------- INT F4 - reserved for user interrupt --------T-F4--------------------------------- INT F4 - DoubleDOS - GIVE UP REST OF CURRENT CLOCK TICK AND ALL OF NEXT TICK SeeAlso: INT 21/AH=EEh"DoubleDOS",INT FE"DoubleDOS" --------N-F2--------------------------------- INT F4 - NetWare Remote Boot - ??? SeeAlso: INT F1"NetWare",INT F2"NetWare",INT F3"NetWare" --------*-F5--------------------------------- INT F5 - reserved for user interrupt --------T-F5--------------------------------- INT F5 - DoubleDOS - ??? --------*-F6--------------------------------- INT F6 - reserved for user interrupt --------T-F6--------------------------------- INT F6 - DoubleDOS - ??? --------*-F7--------------------------------- INT F7 - reserved for user interrupt --------T-F7--------------------------------- INT F7 - DoubleDOS - ??? ----------F700------------------------------- INT F7 - FSBBS 2.0 - CONFIGURATION RECORD AH = 00h AL = function 00h get configuration record Return: DS:DX -> configuration record 01h set configuration record 02h get path for option DS:DX -> option name Return: DS:DX -> path 03h determine whether configuration record set Return: AX = status 0000h set 0001h not yet set 04h get link state Return: AX = state 0000h unlinked 0001h linked Notes: this information is preliminary and still subject to change all of the INT F7 calls for FSBBS are used for interprogram communication between the BBS kernel and the programs it spawns SeeAlso: AH=01h ----------F701------------------------------- INT F7 - FSBBS 2.0 - USER RECORD AH = 01h AL = function 00h get user record for user currently online Return: DS:DX -> user record 01h set user record DS:DX -> user record SeeAlso: AH=00h,AH=02h ----------F702------------------------------- INT F7 - FSBBS 2.0 - GET ACCOUNT NAME AH = 02h Return: DS:DX -> 8-character blank-padded account name SeeAlso: AH=01h ----------F703------------------------------- INT F7 - FSBBS 2.0 - TERMINAL NUMBER AH = 03h AL = function 00h get terminal index number Return: DX = index number 01h set terminal index number DX = terminal index ----------F704------------------------------- INT F7 - FSBBS 2.0 - PASSDATA BUFFER AH = 04h AL = function 00h get PassData buffer contents DS:DX -> buffer for PassData contents 01h set PassData contents DS:DX -> buffer containing new PassData CH = length of data in buffer ----------F705------------------------------- INT F7 - FSBBS 2.0 - TIMER FUNCTIONS AH = 05h AL = function 00h get time remaining Return: DX = number of minutes remaining 01h get current time Return: DS:DX -> 8-character time string 02h increment time DX = number of additional minutes 03h decrement time DX = number of minutes SeeAlso: AH=06h ----------F706------------------------------- INT F7 - FSBBS 2.0 - FUNCTION AVAILABILITY AH = 06h AL = function 00h determine whether function is available DX = index of function 01h set function availability DX = index of function ??? SeeAlso: AH=05h,AH=07h ----------F707------------------------------- INT F7 - FSBBS 2.0 - DUMP FUNCTIONS AH = 07h AL = function 00h get current dump mode Return: DL = mode 01h set dump mode DL = mode SeeAlso: AH=06h --------*-F8--------------------------------- INT F8 - reserved for user interrupt --------h-F8--------------------------------- INT F8 - Sanyo MBC-550 - IRQ0 - 100 HZ INTERRUPT SeeAlso: INT 08"IRQ0",INT F9"Sanyo",INT FA"Sanyo" --------T-F8--------------------------------- INT F8 - DoubleDOS - ??? --------*-F9--------------------------------- INT F9 - reserved for user interrupt --------T-F9--------------------------------- INT F9 - DoubleDOS - ??? --------h-F9--------------------------------- INT F9 - Sanyo MBC-550 - IRQ1 - ??? SeeAlso: INT 09"IRQ1",INT F8"Sanyo",INT FA"Sanyo" --------*-FA--------------------------------- INT FA - reserved for user interrupt --------h-FA--------------------------------- INT FA - Sanyo MBC-550 - IRQ2 - SERIAL PORT USART INTERRUPT Note: this vector is not used on the Tandy 1000TL SeeAlso: INT 0A"IRQ2",INT F9"Sanyo",INT FB"Sanyo" --------T-FA--------------------------------- INT FA - DoubleDOS - TURN OFF TIMESHARING SeeAlso: INT 21/AH=EAh"DoubleDOS",INT FB"DoubleDOS" --------*-FB--------------------------------- INT FB - reserved for user interrupt --------h-FB--------------------------------- INT FB - Sanyo MBC-550 - IRQ3 - KEYBOARD USART RECEIVE INTERRUPT SeeAlso: INT 0B"IRQ3",INT FA"Sanyo",INT FC"Sanyo" --------T-FB--------------------------------- INT FB - DoubleDOS - TURN ON TIMESHARING SeeAlso: INT 21/AH=EBh"DoubleDOS",INT FA"DoubleDOS" --------*-FC--------------------------------- INT FC - reserved for user interrupt --------T-FC--------------------------------- INT FC - DoubleDOS - GET CURRENT SCREEN BUFFER ADDRESS Return: ES = segment of display buffer Desc: determine the address of the virtual screen to which the program should write instead of the actual video memory, so that the multitasked programs do not interfere with each other's output Note: the display buffer may be moved if multitasking is enabled SeeAlso: INT 21/AH=ECh"DoubleDOS",INT FB"DoubleDOS" --------h-FC--------------------------------- INT FC - Sanyo MBC-550 - IRQ4 - ??? SeeAlso: INT 0C"IRQ4",INT FB"Sanyo",INT FD"Sanyo" --------*-FD--------------------------------- INT FD - reserved for user interrupt --------T-FD--------------------------------- INT FD - DoubleDOS - ??? --------h-FD--------------------------------- INT FD - Sanyo MBC-550 - IRQ5 - ??? SeeAlso: INT 0D"IRQ5",INT FC"Sanyo",INT FE"Sanyo" --------S-FD--------------------------------- INT FD - TFPCX - INSTALLATION CHECK AH = function (see separate entries below) Program: TFPCX is an interface between modem and terminal program for packet- radio communications Notes: the installation check consists of testing for the string "N5NX" three bytes beyond the interrupt handler; INT FD is the default, but may be changed, so the full installation check consists of scanning for the signature TFPCX returns AX=FFFFh on any unsupported function call SeeAlso: AH=01h,AH=03h,AH=FEh --------S-FD01------------------------------- INT FD - TFPCX - TEST FOR CHARACTER WAITING AH = 01h Return: AX = status 0000h no characters waiting 0001h character available for input Program: TFPCX is an interface between modem and terminal program for packet- radio communications SeeAlso: AH=02h --------S-FD02------------------------------- INT FD - TFPCX - GET CHARACTER AH = 02h Return: AL = character Notes: this call is only allowed if AH=01h indicated that a character is available all available characters should be read before sending any additional characters SeeAlso: AH=01h,AH=03h --------S-FD03------------------------------- INT FD - TFPCX - OUTPUT CHARACTER AH = 03h AL = character to send SeeAlso: AH=02h --------S-FDFE------------------------------- INT FD - TFPCX - GET VERSION AH = FEh Return: AH = major version AL = minor version Program: TFPCX is an interface between modem and terminal program for packet- radio communications SeeAlso: AH=01h,AH=03h --------B-FE--------------------------------- INT FE - AT/XT286/PS50+ - destroyed by return from protected mode Note: the ROM BIOS uses 0030h:0100h as the initial stack on startup, which is the last fourth of the interrupt vector table. If the processor is returned to real mode via a hardware reset (the only possibility on an 80286, though there are a number of ways of generating one), then the BIOS startup code stacks three words on its scratch stack before determining that a return to real mode has been requested. As a result, INT FE and INT FF are corrupted. SeeAlso: INT FF"XT286" --------T-FE--------------------------------- INT FE - DoubleDOS - GIVE UP TIME AL = number of 55ms time slices to give away Return: after other program (if active) has run SeeAlso: INT 21/AH=EEh"DoubleDOS",INT F4"DoubleDOS" --------G-FE--------------------------------- INT FE - Turbo Debugger 8086 v2.5+ - OVERLAY MANAGER SeeAlso: INT 3F --------h-FE--------------------------------- INT FE - Sanyo MBC-550 - IRQ6 - ??? SeeAlso: INT 0E"IRQ6",INT FD"Sanyo",INT FF"Sanyo" --------B-FF--------------------------------- INT FF - AT/XT286/PS50+ - destroyed by return from protected mode Note: (see INT FE"XT286") SeeAlso: INT FE"XT286" --------b-FF--------------------------------- INT FF - Z100 - WARM BOOT SeeAlso: INT 40"Z100" --------h-FF--------------------------------- INT FF - Sanyo MBC-550 - IRQ7 - ??? SeeAlso: INT 0F"IRQ7",INT FE"Sanyo" --------Q-FF--------------------------------- INT FF U - QEMM-386.SYS v6.0+ - internal Notes: requires that a byte in the conventional-memory stub be set to the desired function number (00h through 0Ch) SeeAlso: #2617 (Table 2617) Values for QEMM internal functions: 00h reflect back to Virtual86-mode interrupt handler (default) 01h ??? 02h access DR7??? 03h QPI upcall (see INT 67/AH=3Fh) 04h ??? 05h ??? 06h INT 15/AH=87h 07h EMS services (see INT 67/AH=40h,INT 67/AH=5Dh) 08h ??? 09h QEMM exception handler 0Ah XMS services (see INT 2F/AX=4310h) 0Bh Virtual DMA Services (see INT 4B/AX=8102h) 0Ch ??? --------v-FF--------------------------------- INT FF - VIRUS - "Violetta" - ??? Note: used but not chained by virus SeeAlso: INT E0"VIRUS",INT F1"VIRUS" --------V-FF----BX0000----------------------- INT FF - PC/FORTH - GRAPHICS API - VIDEO STATUS CHANGE BX = 0000h DS:SI -> FORTH program counter SS:BP -> FORTH parameter stack SS:SP -> FORTH return stack DS:DX -> FORTH video parameter area Desc: called to inform graphics driver of any status changes such as video mode changes, character color changes, graphics XOR mode turned on or off, etc. --------V-FF--------------------------------- INT FF - PC/FORTH - GRAPHICS API BX = function number 0001h function REDRAW 0002h function !PEL 0003h function @PEL 0004h function LINE 0005h function ARC 0006h function @BLOCK 0007h function !BLOCK 0008h function FLOOD DS:SI -> FORTH program counter SS:BP -> FORTH parameter stack SS:SP -> FORTH return stack details of parameters not available --------!---Admin---------------------------- Highest Table Number = 2734 --------!---FILELIST------------------------- Please redistribute all of the files comprising the interrupt list (listed at the beginning of the list and in INTERRUP.1ST) unmodified as a group, in a quartet of archives named INTER47A through INTER47D (preferably the original authenticated PKZIP archives), the utility programs in a fifth archive called INTER47E.ZIP, and the WinHelp-related programs in a sixth archive named INTER47F.ZIP. This compilation is Copyright (c) 1989,1990,1991,1992,1993,1994,1995 Ralf Brown --------!---CONTACT_INFO--------------------- Internet: ralf@telerama.lm.com UUCP: {uunet,harvard}!telerama.lm.com!ralf FIDO: Ralf Brown 1:129/26.1 or post a message to me in the DR_DEBUG echo (I probably won't see it unless you address it to me) CIS: >INTERNET:ralf@telerama.lm.com