home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PC World Komputer 1996 February
/
PCWK0296.iso
/
sharewar
/
dos
/
muzyka
/
voiblast
/
blastr.hlp
< prev
next >
Wrap
Text File
|
1993-11-14
|
5KB
|
149 lines
RECORD HELP
(C) 1991-1993 Copyright by Mark E Cowan
═══════════════════════════════════════════════════════════════════════
■ File path\name to record ─┐
■ ┌ ■ Select new file
┌────────────────────── C:\XXX ───│───────────────────────┐
│ File ... ──┘ │
│ │
│ ┌──Rate────┐ ┌──Input ──┐ ┌──Settings──┐ ┌─Filter──────┐│
│ │(■) 7 kHz │ │(■) Mice │ │(■) 8 bit │ │(■) None ││
│ │( ) 11kHz │ │( ) CD │ │( ) 16 bits │ │( ) Low Pass ││
│ │( ) 22kHz │ │( ) Line │ │ │ │(■) High Pass││
│ │( ) 44kHz │ │ │ │ │ │ ││
│ └──────────┘ └──────────┘ └────────────┘ └─────────────┘│
│ │
│ 12300 KBytes Free 12 File Size KBytes │
│ │
│ Record ───┐ │ │ Playback│
│ │ │ Quit Help │ │
│ Delete ─┐ │ │ │ │ │
└───────── │─│─│────────────│───────────│───│─────│───────┘
■ │ │ │ │ │ │ └ ■ Play recording
■ Delete ──┘ │ │ │ │ └ ■ Recorded file size
file │ │ │ └ ■ Help for record dialog
■ │ │ └──── ■ Cancel the recording session
■ Record ────┘ └ ■ KBytes free disk space
file
■ GENERAL RECORDING INSTRUCTIONS
Recording is done using the Creative Labs double buffering
driver. All recording is done by recording directly into
a file. This allows for recording with no time limit,
accept of course your hard disk space available.
**************************************************************
If you record a file, and then select to record again without
selecting another file name, the previously recorded file will
be erased! Remember that!
**************************************************************
■ Record file
Activate this button to start the recording sequence. After this
is started, a dialog box will appear allowing you to Pause,
Continue, or Stop the recording
After the recording has started, begin immediately speaking into
the microphone
■ Delete file
Activate this button to delete the last recorded file. You can
only delete a file you just recorded.
■ Play recording
Playback the recorded file by activating this button. On Sound
Blaster Pro and SB 16, the input channel volume will be turned
off until playback is finished so that you can hear what you
just recorded without mixing the playback with the input.
■ Rate Group
Select the radio button for the frequency to record
■ Input Group
Select the input channel to record from. When you select a
channel, the volume for that channel will be automatically
turned up. (SB Pro and SB 16 only)
■ Settings Group
Select 8 bit or 16 bit recording. (not implemented in this
version to keep this program compatible with all SB cards).
■ Filter Group
Select the desired recording filters (SB Pro and SB 16 only)
■ Recorded file size
This will display the size of the last recorded file in
units of kBytes (1000 bytes)
■ KBytes free disk space
This will display the available free disk space on the drive
that is selected in units of kBytes (1000 bytes)
■ File path\name to record
This is the currently selected path\filename to record. Activate
the File button to select a new filename
■ Select new file
This push button when activated will bring up a file dialog box to
select a new path\filename to record
■ Begin recording
Activate this button to start the recording sequence. After this
is started, a dialog box will appear allowing you to Pause,
Continue, or Stop the recording
After the recording has started, begin immediately speaking into
the microphone
■ Cancel
Activate this button to end the Recording Dialog session
HELP FOR USING THE FILE DIALOG BOX
■ To load a file from the current directory:
┌────────── Open File ────────────┐
│ File Name:C:\XXX ─────────┼─ ■ Type the file name
│ C:\XXX ──current directory │
│ │ OR
│ File List: Drives/Dirs: │
│ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒ │ ■ Select the file name
│ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒ │ │
│ │ │
│ └────────────────────────┼──┘
└─────────────────────────────────┘
THEN
■ Choose <OK>
■ To open a file in another directory:
┌────────── Open File ────────────┐
│ File Name:C:\XXX ──────────┼─ ■ Type the directory name and
│ │ file name
│ C:\MYPROGS ──current directory │ OR
│ │┌ ■ Select the directory name
│ File List: Drives/Dirs: ││
│ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒ ┼┘AND
│ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒ │ ■ Select the file name
│ │ │
│ └────────────────────────┼──┘
└─────────────────────────────────┘ THEN
■ Choose <OK>