2111 Would you like to read the latest information about this product?
2112 Check if Enough Drive Space is available
2113 The Target location, "
2114 ", does not have the required %ld bytes available for installation.\n
2115 Please free additional space, change the target location, to a different disk, or remove a component from being installed.
2120 Setup
2121 Copying Common Data
2122 Transfering Files
2123 Operator Input Needed
2124 Severe Error During SETUP
2200 Unable to create a directory! \nDirectory:
2201 \nPlease check write access to this directory.
2202 Library File not found!
2203 A general error occurred during file transfer!
2204 An operation error occurred during file transfer!
2205 Error launching process!
2206 Error in packaging!
2207 An error occurred requiring a system reset!
2208 General file transfer error! Please check your target location and try again.\n\nError Number:
2209 There is not enough space available on the disk!\nDisk:
2210 Please free up some space or change the target location\nto a different disk.\nSpace needed:
2211 The disk inserted into the drive was not the disk Setup requested. Please insert the correct disk to continue
2212 Setup cannot launch an intermediate file needed to proceed with the installation. Files may be missing or damaged. Setup cannot continue.
2213 Setup needs you to insert the next disk into the drive to complete the installation process
2214 Setup was unable to overwrite a read only or in-use file. The required file cannot be installed at this time. Setup cannot continue.
2215 An error occurred while copying or decompressing the application files. The source media may be damaged. Setup cannot continue.
2500 This program requires VGA or better resolution!
2501 Failed to create key in registry!
2502 Failed to write to key in registry!
2503 Error finding Web Browser!
2504 Install query
2505 Setup has detected that there is or was a SCSI tape drive on your system.\n\nIf you choose to use tape as your storage media, McAfee's Tape File System \nwill be installed. This will require a reboot of your system.\nInstall McAfee's Tape File System?
2506 Copying Program Files...
2507 Creating Program Folder and Icons...
2508 Installation complete!
2509 Some files could not be installed because they are currently in use by \nother programs in the system. To allow for proper operation of the new \nprogram you should restart your system at this time.
2510 Reboot system
2511 McAfee's Tape File System has been installed.\n\nIn order to use this unique feature, it is required\nthat you reboot your sytem at this time.
2512 Choose Option
2513 Setup has installed all files needed.\nChoose one option from the following list: \n\n
2514 Launch
2515 now
2516 Sign up for the McAfee Personal Vault
2517 Finish Setup and go back to Windows
2518 McAfee's Tape IFS Successfully Installed!
2519 It is now strongly recommend that you run ISBOOT to create\nan essential boot disk for ImageStor to work from.\n\nTo do this, you will need to place a blank floppy\nin your A: drive.\n\nDo you wish to run ISBOOT now?
2550 Preparing Diskette for Transfer...
2551 SETUP is complete. To create your disastor recovery\nboot disk at a later time, run ISBOOT.
2552 Click on FINISH to exit setup.
2553 Ready to run!
2554 You may now run ImagStor from Windows. During the image\ncopy please refrain from using your system as it will\ninterfere with the integrity of the image copy.
2555 Yes, I want to run ImageStor now.
2556 No, I wish to return to Windows.
2557 SETUP is complete. \n\nStore the boot diskette you just made in a safe place.\nYou will need it in the event of a hard disk failure or\ncorruption.
2558 Click on FINISH to exit setup.
2580 Read Me 1st
2581 What's New in
2582 Boot Sector Virus Removal
2583 BBS Info
2584 License Info
2585 License Info for
2586 Would you like to review ?
3000 Scan System During Setup
3001 Setup can perform a comprehensive check of your system for viruses.
3002 Would you like to have Setup do this for you ?
3003 Scanning system for viruses...
3004 VirusScan Setup Alert
3005 Infected
3006 The virus scan did not complete sucessfully. Your machine may be infected with a virus !
3007 To minimize to possibility of virus infection, it is recommended that you allow Setup to remove
3008 from your system and cancel the installation.\n\nDo you want Setup to Cancel the Installation ?
3500 Failure Reading AUTOEXEC.BAT
3501 Failure Writing AUTOEXEC.BAT
3502 Delete VSHIELD.DAT If Exists
3503 Shut Down VShield
3504 VShield Configuration Manager
3505 VSHCFG16.EXE
3700 Shut Down VShield
3701 Delete VSHIELD.DAT if Exists
3702 VSHLDWIN.EXE
3703 VShield for Windows
3704 VSHCFG16.EXE
3705 VShield Configuration Manager
3800 VirusScan Help
3801 WSCAN for Windows
3802 Installing ACROBAT READER
3803 Getting Started Manual
3804 User Guide Manual
3900 Found a Copy of VirusScan Installed
3901 Setup has found
3902 installed on your computer. It is recommended that you Uninstall this older version before proceeding.\n\n
3903 Do you wish to CONTINUE with the installation, allow Setup to UNINSTALL the older version, or CANCEL altogether?
3904 Select 'YES' to continue with the uninstall or 'NO' to cancel this installation.
3905 installed on your computer. In order to take advantage of VirusScan's New Technology, the previous version must be uninstalled before proceeding.\n\n
3906 Would you like to allow Setup to UNINSTALL the previous version of VirusScan or CANCEL the installation now?\n\n
4000 Found Release Candidate installed!
4001 Setup has found
4002 installed on your computer. You should exit SETUP \nand use the Uninstall program found in the
4003 directory to uninstall it before continuing with setup.\n\nDo you wish to continue?
4004 Found current version installed !
4005 Setup has found
4006 installed on your computer. It is recommended that you uninstall before proceeding.\n\n
4007 Do you wish to UNINSTALL, CONTINUE, or CANCEL the installation altogether ?
4008 Found previous version installed !
4009 Setup has found
4010 installed on your computer. This is a version earlier than the one you are attempting to install now.
4011 It is recommended that you Uninstall this older version before proceeding.\n\n
4012 Do you wish to CONTINUE with the installation, allow Setup to UNINSTALL the older version,
4013 or CANCEL the installation altogether ?
4014 Continue
4015 Uninstall
4016 Cancel
4017 Found more recent version installed !
4018 Setup has found
4019 installed on your computer.
4020 This version is more recent than the version you are about to install.\n\n
4021 It is recommended that you first uninstall
4022 using it's uninstaller before proceeding.\n\nDo you wish to continue with the installation?
4025 The VirusScan Console cannot be installed without the VirusScan On-Demand Scanner.\n\nDo you wish to install both?
4026 The VirusScan Console cannot be installed without the VirusScan On-Demand Scanner.\n\nDo you wish to install both?
4030 Select
4031 Installation Options
4032 Please select the options you would like Setup to configure.
4040 Copying Anti-Virus definition files...
4041 Copying
4042 files...
4043 Copying common library files...
4044 Copying Common General
4060 Scanning system area for viruses...
4061 VirusScan Alert - Virus Found!
4062 To minimize the possibility of virus infection, it is recommended that you allow Setup to remove
4063 from your system and cancel the installation.\n\nDo you want Setup to cancel the installation ?
4064 Scan of system area is complete. No viruses were found.\n\n Press OK to continue.
4080 Shutdown VShield
4081 Delete VSHIELD.DAT if available
4100 Create
4101 Start
4102 McAfee Alert Manager
4120 MCCONSOL.EXE
4121 Console
4130 AMGRCNFG.EXE
4131 Alert Manager
4140 SCAN32.EXE
4141 VirusScan
4150 VSHLDWIN.EXE
4151 VShield for Windows
4160 SCAN32.HLP
4161 VirusScan Help
4170 CONFIG32.EXE
4171 VirusScan Configuration Manager
4180 VSHLDCFG.HLP
4181 Online Help for VShield Configuration Manager
5007 Error determining possible upgrade! Assuming new install...
5008 Error processing Path information!
5009 Error Parsing Ini File! Aborting Install.
5050 Setup will install the Application in the Destination Directory.\n\nTo install in the Destination Directory, choose Next > Button.\n\nTo install in a different directory, choose Browse... Button.
5051 Setup will install the Application in the Destination Directory.\n\nTo install in the Destination Directory, choose Next > Button.\n\nTo install in a different directory, choose Browse... Button.
5052 Choose which program you wish to install.\nClick NEXT to continue the installation.
5500 Confirm Installation Settings
5501 Setup has enough information to begin copying
5502 files to your computer and complete the installation. Listed below is a summary of the changes setup will make to your system.\n\n
5503 If you want to review or change any of these settings, please press BACK now.
5504 If you are satisfied with the settings, press NEXT to proceed with the file transfer.
5530 User Information:
5531 Name:
5532 Company:
5560 Target Directory:
5561 Selected Components - TYPICAL:
5562 Selected Components - COMPACT:
5563 Selected Components - CUSTOM:
5564 Program Folder:
5565 None
5600 VirusScan for DOS
5601 On-demand virus scanning for the DOS environment.
5610 VShield
5611 On-Access Protection from Viruses.
5620 VirusScan for Windows
5621 On-demand and scheduled virus scanning for the Windows environment.
5630 VirusScan
5631 Software to provide comprehensive protection from virus infection, including Internet, e-mail, and Word macro viruses.
5640 ScreenScan
5641 Provides virus protection by scanning your system automatically whenever your screen saver is active.
5645 ScreemScan Screen Saver
5646 Not for the faint of heart, this screen saver is likely to make you scream! Install this component at your own risk.
5650 CrashMonitor
5651 Provides crash protection by monitoring your system's applications and resources constantly, restarting stopped applications and alerting you when resources get low. Stop crashes before they stop you!
5655 CrashMonitor must be selected for the installation to continue.\n\nDo you wish to install this component?
5656 CrashMonitor Not Selected
5657 Do you wish to continue with the installation?
5658 Exit Install
5700 Command Line Scanner
5701 VShield On-Access Scanner
5702 VirusScan On-Demand Scanner
5703 ScreenScan
5704 VirusScan Console
5710 Command Line Scanner
5711 VShield On-Access Scanner
5713 VirusScan On-Demand Scanner
5714 VirusScan Console
5720 DOS/Command Line virus protection, optionally performing system file and memory scans prior to starting windows, and Emergency Disk creation utility
5721 Background scanner for Windows 3.1x providing protection from known and unknown viruses
5723 User initiated scanner for known and unknown viruses located on local and network drives
5750 DOS/Command Line virus protection, optionally performing system file and memory scans prior to starting windows, and Emergency Disk creation utility
5751 Background scanner for Windows 95 providing protection from known and unknown viruses
5752 User initiated scanner for known and unknown viruses located on local and network drives
5753 Windows 95 screen saver enhancement providing automatic virus scanning whenever your screen saver is active
5802 Add right mouse click access for virus scanning
5803 No context sensitive scanning
5820 Preparing file transfer...
5821 Migrating Data...
5822 Configuring System...
5823 Creating Program Folder and Icons...
5840 Severe Setup Error Encountered
5841 A severe error has occurred which caused the installation to abort. Please correct the problem and rerun the Setup program.
5842 Changes Made
5843 To store configuration information, Setup has made modifications to the file(s) listed below. Setup has also made a backup for any file which was updated.
5861 Setup has finished copying files to your computer.\n\nBefore you can take advantage of the new components, you must restart your computer.
5862 Setup has finished copying files to your computer.\n\nYour system is now ready to use the newly installed components.
5880 Error Encountered
5881 Impossible setup type selected, please retry.
5882 No Components Selected!
5883 You have not selected any components to install on this computer. Setup will not be able to continue
5884 with these settings. Please correct this situation by choosing to install at least one
5885 product component or by clicking cancel to quit the Setup program.
6000 Unsupported operating system detected
6001 This version of
6002 is not designed to operate on the version of Windows you are currently running.
6003 Please consult the products' documentation for a list of supported platforms.
6010 Insufficient User Privileges
6011 This product requires that you be logged into the computer as a user with ADMINISTRATIVE privileges.
6012 Setup has determined that the current account does not have this privilege.
6013 Please login as the Administrator or equivalent and re-install the product.
6020 Previous Software Found
6021 Setup has found the following product on your system:\n\n
6022 \nIt is highly recommended that you first Uninstall the above product before proceeding with the installation of
6023 .\n\nWould you like to continue with Setup?
6040 Not Enough Components Selected!
6041 You have selected to install the
6042 component but have not selected any other components to install. This component requires that you install one of the other
6043 components. Setup will not be able continue with these settings. Please correct this situation by choosing to install at least another
6044 product component or by clicking cancel to quit the Setup program.
6200 Choose Console Component Directory
6201 Please select the directory where you want the
6202 console components installed.
7000 Service Account Usage
7001 In order for this product to access network resources,
7002 services must be started with an administrative user account that you specify. Examples where this product can use network resources include forwarding alerts to other computers,
7003 performing automated updates of virus definition files, and performing scheduled scans of network drives. You may want to consider allowing this account to have a non-expiring password.
7004 \n\nIf you do not want to specify a custom account during installation, select the "Use the SYSTEM Account" option on the next dialog box. The SYSTEM account will only be able to access resources on this computer.
7005 \n\nPlease note that you can change the Service account options later through the Services applet in the Control Panel.
7010 Service Account Information
7020 The
7021 Task
7040 service started successfully.
7041 service ended successfully.
7042 Task started successfully.
7043 Task %TASKNAME% was successfully started on %COMPUTERNAME%.
7044 service started successfully on %COMPUTERNAME%.
7045 service ended successfully on %COMPUTERNAME%.
7050 Error starting Task.
7051 Task %TASKNAME% encountered an error while attempting to start on %COMPUTERNAME%.
7060 Task has completed successfully.
7061 Task %TASKNAME% has completed successfully on %COMPUTERNAME%.
7070 Error while stopping task.
7071 Error stopping task %TASKNAME% on %COMPUTERNAME%.
7080 Infected file found.
7081 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%.
7090 Infected file successfully cleaned.
7091 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. The file was successfully cleaned.
7100 Unable to clean infected file.
7101 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to clean file. Cleaner unavailable or unable to access the file.
7110 Infected file deleted.
7111 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. The file was successfully deleted.
7120 Unable to delete infected file.
7121 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to delete infected file. Verify access to file.
7130 File to be excluded from scans.
7131 The file %FILENAME% on %COMPUTERNAME% will be excluded from further scans.
7140 Unable to exclude item from scans.
7141 Unable to exclude %FILENAME% on %COMPUTERNAME% from further scans.
7150 Infected file access denied.
7151 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Access to file denied.
7160 Infected file was moved to quarantine area.
7161 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. The infected file was moved to quarantine.
7170 Unable to move infected file to quarantine.
7171 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to move file in quarantine area. Verify file access.
7180 Scan task completed. No viruses found.
7181 The task %TASKNAME% on %COMPUTERNAME% completed. No infected files were found.
7190 Task was cancelled.
7191 The task %TASKNAME% on %COMPUTERNAME% was cancelled.
7200 Virus found in Memory.
7201 The task %TASKNAME% on %COMPUTERNAME% found the system's memory infected with a virus.
7210 Infected boot record found
7211 The task %TASKNAME% on %COMPUTERNAME%found an infected boot record.
7220 Task found Infected files.
7221 The task %TASKNAME% on %COMPUTERNAME% found infected files.
7230 Task found and cleaned infected files.
7231 The task %TASKNAME% on %COMPUTERNAME% found and cleaned infected files.
7240 Task error while accessing activity log file.
7241 The task %TASKNAME% on %COMPUTERNAME% reported an error accessing the activity log file.
7250 Task reports memory allocation error.
7251 The task %TASKNAME% on %COMPUTERNAME% reported a memory allocation error.
7260 Directory length access error.
7261 The directory path name is too long. The task %TASKNAME% on %COMPUTERNAME% could not scan some items in the specified location.
7270 Media is write protected.
7271 The task %TASKNAME% on %COMPUTERNAME% could not access due to media write protection.
7280 Specified media not found.
7281 The task %TASKNAME% on %COMPUTERNAME% could not find the specified media.
7290 Specified scan item is invalid.
7291 The task %TASKNAME% on %COMPUTERNAME% found an invalid scan item.
7300 File I/O errors.
7301 The task %TASKNAME% on %COMPUTERNAME% reported a file I/O error.
7310 Disk I/O errors.
7311 The task %TASKNAME% on %COMPUTERNAME% reported a disk I/O error.
7312 %SOFTWARENAME% %SOFTWAREVER%
7320 Task reports general system error.
7321 The task %TASKNAME% on %COMPUTERNAME% reported a general system error.
7330 Task reported an internal application error.
7331 The task %TASKNAME% on %COMPUTERNAME% reported an internal application error. %SOFTWARENAME% %SOFTWAREVERSION%
7340 Error opening Service Manager.
7341 An Error occurred while trying to open the WinNT Service Manager on %COMPUTERNAME%.
7350 Error starting drivers.
7351 An Error occurred while starting the drivers on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7360 Error occurred starting log subsystem.
7361 An error occurred while starting the log subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7370 Error obtaining device driver versions.
7371 An error occurred while obtaining device driver versions on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7380 Invalid virus signature files.
7381 The device driver on %COMPUTERNAME% reported invalid virus signature files. %SOFTWARENAME% %SOFTWAREVERSION%
7390 Scan engine error.
7391 The device driver on %COMPUTERNAME% reported an error in the scan engine. %SOFTWARENAME% %SOFTWAREVERSION%
7400 Initialization error with scan buffer.
7401 The device driver on %COMPUTERNAME% reported an error initializing the most recently scanned buffer. %SOFTWARENAME% %SOFTWAREVERSION%
7410 Memory allocation error.
7411 The device driver on %COMPUTERNAME% reported a memory allocation error. %SOFTWARENAME% %SOFTWAREVERSION%
7420 Unknown error reported.
7421 The device driver on %COMPUTERNAME% reported an unknown error. %SOFTWARENAME% %SOFTWAREVERSION%
7430 Error sending new options to device driver.
7431 An error occurred sending new options to the device driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7440 Error sending exclude information to the driver.
7441 An error occurred sending exclude information to the driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7450 Error sending move to folder exclude item to the driver.
7451 Error sending move to folder exclude item to the driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7460 Error obtaining log data from device driver.
7461 An error occurred obtaining log data from the device driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7470 Error occurred while enabling driver.
7471 An error occurred while enabling the driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7480 Error occurred while disabling driver.
7481 An error occurred while disabling the driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7490 Error while obtaining statistical data from driver.
7491 An error occurred while obtaining statistical data from the device driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7500 Error while trying to open/create activity log file.
7501 An error occurred while trying to open/create activity log file on %COMPUTERNAME%.
7510 Activity log file maximum size reached.
7511 The activity log file reached maximum user defined size on %COMPUTERNAME%. File has been truncated.
7520 Error launching a program upon virus infection.
7521 An error occurred on %COMPUTERNAME% while launching a program upon virus infection. %SOFTWARENAME% %SOFTWAREVERSION%
7530 Error during initialization of the activity log file.
7531 An error occurred during initialization of the activity log file on %COMPUTERNAME%. Possible memory allocation error. %SOFTWARENAME% %SOFTWAREVERSION%
7540 Remove
7541 service from
7542 Wait for
7543 to be removed
7550 Unable to write the activity log file.
7551 Unable to write the activity log file on %COMPUTERNAME%. Disk is full.
7560 Memory grant unavailable.
7561 The operating system on %COMPUTERNAME% was unable to grant additional memory.
7562 Error writing to log
7563 Error writing to the Activity log file on %COMPUTERNAME%.
7570 Error stopping drivers
7571 An Error occurred while stopping the drivers on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
8000 Drivers in Use
8001 Setup has detected that your system is running the following drivers which
8002 needs to install:\n
8003 \nThis is most likely the result of not rebooting after uninstalling a product which uses these drivers.
8004 While these drivers are running, Setup will be unable to complete sucessfully.
8005 In order to properly install this product, you need to restart your system and run Setup again.
8006 Do you wish to continue with Setup anyway ?
8010 McAfee Task Manager
8011 McAfee Alert Manager
8020 currently installed
8021 Setup detected an earlier version of this product on your computer. Would you like to upgrade this version?\nNote: Please close any open
8022 windows before proceeding.
8023 installation while these services are running, the installation may not be sucessful or the product may not function correctly.
8024 In order to properly install this product, Setup needs to temporarily disable the service(s).\n\n
8025 Do you wish to have Setup disable the service(s)?
8030 Select System Options
8031 Please select which options you would like enabled for
8032 NOTE: Setup recommends that the services be started Automatically on startup for mission critical systems.
8040 Choose Server Component Directory
8041 Please select the directory where you want the
8042 server components installed into. \nNote: you MUST be the Supervisor or have equivalent rights in order to proceed.
8050 Insufficient Rights
8051 Setup has determined that you do not have sufficient rights to the directory you have specified.
8052 Please select another server or reattach with an account with appropriate rights.
8060 An error occurred while trying to remove the previous product or stop the SNMP service on your computer.
8061 Options
8062 \nIt is strongly recommended you perform the manual uninstallation procedure documented in the Whatsnew.txt file. Do you still wish to proceed with the installation?
8070 Server
8071 Services and drivers required for server protection.
8080 AlertManager
8081 McAfee Alert Manager
8090 McTaskManager
8091 McAfee Task Manager
8100 McFilter
8101 McAfee File System Filterer
8110 McFsrec
8111 McAfee File System Recognizer
8120 McKrnl
8121 McAfee I/O Interface
8130 McScan
8131 McAfee Scanning Engine
8140 McShield
8141 McAfee On-Access Scanning Engine
8150 McUtil
8151 McAfee Utilities
8160 Scan
8170 Create
8171 Start
8200 Automatically start Task Manager on system startup.
8201 Start Task Manager upon completion of installation.
8202 Add right mouse click access for virus scanning.
8300 Start TaskManager on Startup
8301 Start TaskManager at end of Setup
8320 Install context sensitive scanning
8400 Incorrect Operating System
8401 This version of
8402 is not designed to operate on the version of Windows you are currently running.
8403 Please consult the products documentation for a list of supported platforms.
8410 VShield Found in Memory
8411 Setup has detected that VShield on-access virus protection is currently enabled on your system. In order for Setup to update
8412 , VShield must be disabled and removed from memory before continuing. After Setup is complete,
8413 you will need to restart your system to re-enable VShield. Do you wish to continue installation?
8420 Scan for &Viruses
8430 Curves and Colors.scr
8440 Select DOS Scanner Installation Options
8441 Select VShield Installation Options
8442 Please select the options you would like Setup to configure.
8443 Load VSHIELD at Windows startup
8444 Do not load VSHIELD automatically
8445 Scan MBR, memory, and system files at bootup
8446 Do not scan MBR, memory, and system files at bootup
8447 Add the target directory to the path
8448 Do not append the target directory to the path
8451 Create Emergency Disk
8452 Do not create Emergency Disk
8453 Save previous VirusScan PROFILES as new VSC format
8456 Please select the option(s) you would like Setup to configure.
8460 Unsupported Operating System
8461 This version of
8462 is not designed to operate on the version of Windows you are currently running. This version of
8463 is designed for Microsoft Windows NT Workstation 3.51 or later. Please consult the products' documentation for more information.
8465 Insufficient User Privileges
8466 This product requires that you be logged into the computer as a user with ADMINISTRATIVE privileges.
8467 Setup has determined that the current account does not have this privilege.
8468 Please login as the Administrator or equivalent and re-install the product.
8470 Previous Software Found
8471 Setup has found the following product on your system:\n\n
8472 \nIt is highly recommended that you first Uninstall the above product before proceeding with the installation of
8473 .\n\nWould you like to continue with Setup?
8475 Error Encountered
8476 Impossible setup type selected, please retry.
8477 No Components Selected!
8478 You have not selected any components to install on this computer. Setup will not be able continue with these settings.
8479 Please correct this situation by choosing to install at least one product component or by clicking cancel to quit the Setup program.
8490 Unable to Install
8491 This product can only be installed onto a local, fixed drive. The one you have chosen is not such a drive. Please select a different drive to install to.
8492 Password mismatch
8493 The password you entered does not match the password you confirmed with. Please correct to make sure these match before proceeding.
8494 The password you entered does not match the password you confirmed with. Please correct to make sure these match before proceeding.
8500 The installation did not complete successfully.
8501 Silent installation of
8502 in progress...
8503 Silent installation completed.
8504 Initializing...
8505 Uninstalling currently installed version...
8506 Determining installation options...
8507 Copying files...
8508 Configuring options...
8509 Do you accept all the terms of the preceding License Agreement? If you choose No, Setup will close. To install this product, you must accept this agreement.
8510 Startup
8550 Centralized Alerting - Scan completed. No viruses found.
8551 The scan on %COMPUTERNAME% completed. No infected files were found. %SOFTWARENAME% %SOFTWAREVERSION%
8555 Centralized Alerting - Scan was cancelled.
8556 The scan on %COMPUTERNAME% was cancelled by %USERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
8560 Centralized Alerting - Virus found in Memory.
8561 The scan on %COMPUTERNAME% found the system's memory infected with a virus. %SOFTWARENAME% %SOFTWAREVERSION%
8565 Centralized Alerting - Infected boot record found.
8566 The scan on %COMPUTERNAME% found an infected boot record. %SOFTWARENAME% %SOFTWAREVERSION%
8570 Centralized Alerting - Scan found infected files.
8571 The scan on %COMPUTERNAME% found infected files. %SOFTWARENAME% %SOFTWAREVERSION%
8575 Centralized Alerting - Scan found and cleaned infected files.
8576 The scan on %COMPUTERNAME% found and cleaned infected files. %SOFTWARENAME% %SOFTWAREVERSION%
8580 Centralized Alerting - Error while accessing activity log file.
8581 The scan on %COMPUTERNAME% reported an error accessing the activity log file. %SOFTWARENAME% %SOFTWAREVERSION%
8591 The directory path name is too long. The scan on %COMPUTERNAME% could not scan some items in the specified location. %SOFTWARENAME% %SOFTWAREVERSION%
8595 Centralized Alerting - Media is write protected.
8596 The scan on %COMPUTERNAME% could not access the media due to write protection. %SOFTWARENAME% %SOFTWAREVERSION%
8600 Centralized Alerting - Specified media not found.
8601 The scan on %COMPUTERNAME% could not find the specified media. %SOFTWARENAME% %SOFTWAREVERSION%
8605 Centralized Alerting - Specified scan item is invalid.
8606 The scan on %COMPUTERNAME% found an invalid scan item. %SOFTWARENAME% %SOFTWAREVERSION%
8610 Centralized Alerting - File I/O errors.
8611 The scan on %COMPUTERNAME% reported a file I/O error. %SOFTWARENAME% %SOFTWAREVERSION%
8615 Centralized Alerting - Disk I/O errors.
8616 The scan on %COMPUTERNAME% reported a disk I/O error. %SOFTWARENAME% %SOFTWAREVERSION%
8620 Centralized Alerting - Scan reports general system error.
8621 The scan on %COMPUTERNAME% reported a general system error. %SOFTWARENAME% %SOFTWAREVERSION%
8625 Centralized Alerting - Scan reported an internal application error.
8626 The scan on %COMPUTERNAME% reported an internal application error. %SOFTWARENAME% %SOFTWAREVERSION%
9000 WebShield for Windows
9001 Background scanner providing protection for the internet and mail programs
9002 WebShield
9010 WSPCGUI.EXE
9011 WebShield
9012 WSPCGUI.HLP
9013 WebShield Help
9050 Restarting Windows
9051 Setup has found a previous installation and must first reboot the computer before continuing.\n\n
9052 WARNING: If Setup is cancelled, WebScanX should be reconfigured to load at startup using its configuration manager.
9060 WebScanX Configuration Manager
9061 WEBCFG32.EXE
9062 WebScanX Help
9064 cc:Scan
9065 CCSCAN.EXE
9066 WebScanX
9067 WEBSCNX.EXE
9100 WebScanX for Windows
9101 On-Access scanner providing protection from the internet and mail programs
9102 WebScanX
9105 Scan components required for cc:Mail scan (non-mapi programs such as Lotus cc:Mail 5 and 6)
9106 cc:Mail Scan
9110 WEBSCANX.EXE
9111 WEBSCANX.HLP
9115 WebScanX Not Selected
9116 WebScanX must be selected for the installation to continue.\n\nDo you wish to install this component?
9117 Exit Install
9118 Do you wish to continue with the installation?
9120 WebScanX
9121 WebScanX Help
9122 No server has been selected
9123 Netshield Netware will not run from a long filename directory.\nPlease choose a directory which fits the 8.3 filename convention.
9124 You have specified a directory which is not valid.\nPlease include the leading "\", and choose a valid directory.
9125 No destination directory selected.
9126 Client32 support not found. Setup can continue the installation without creating the NDS object on this server. \nTo create the object manually, run NSHINST.NLM on the server once the installation is finished. \n\nDo you want to continue installing to this server without NDS object creation ?
9127 The user authenticated to this server does not have sufficient rights to create an NDS object to that path. Setup can continue the installation without creating the NDS object on this server. \nTo create the object manually, execute NSHINST.NLM on the server once the installation is finished. \n \nDo you want to continue installing to this server without NDS object creation ?
9128 The NDS context you have specified is invalid.
9129 Setup was unable to attach to NDS context. \nVerify that the server you're installing to is 4.x, that Client32 is installed, and that the context you entered is valid. Setup can continue the installation without creating the NDS object on this server. \nTo create the object manually, execute NSHINST.NLM on the server once the installation is finished. \n\nDo you want to continue installing to this server without NDS object creation ?
9130 CCS_CFG.EXE
9131 cc:Scan Configuration Manager
9500 Centralized Alerting - Infected file found.
9501 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9506 The file %FILENAME% on %COMPUTERNAME% was infected with the virus %VIRUSNAME%. The file was successfully cleaned. %SOFTWARENAME% %SOFTWAREVERSION%
9510 Centralized Alerting - Unable to clean infected file.
9511 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to clean the file. %SOFTWARENAME% %SOFTWAREVERSION%
9516 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. The file was successfully deleted. %SOFTWARENAME% %SOFTWAREVERSION%
9520 Centralized Alerting - Unable to delete infected file.
9521 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to delete the infected file. %SOFTWARENAME% %SOFTWAREVERSION%
9525 Centralized Alerting - File to be excluded from scans.
9526 The file %FILENAME% on %COMPUTERNAME% will be excluded from further scans. %SOFTWARENAME% %SOFTWAREVERSION%
9530 Centralized Alerting - Unable to exclude item from scans.
9531 Unable to exclude %FILENAME% on %COMPUTERNAME% from further scans. %SOFTWARENAME% %SOFTWAREVERSION%
9536 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Access to the file was denied. %SOFTWARENAME% %SOFTWAREVERSION%
9540 Centralized Alerting - Infected file was moved to quarantine area.
9541 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. The infected file was moved to quarantine area. %SOFTWARENAME% %SOFTWAREVERSION%
9545 Centralized Alerting - Unable to move infected file to quarantine.
9546 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to move the file to the quarantine area. %SOFTWARENAME% %SOFTWAREVERSION%
9547 Sender: %SENDER% Recipient: %RECIPIENT%
9548 An Error occurred while starting the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9549 Error obtaining mail scanning versions.
9550 An error occurred while obtaining mail scanning version on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9551 The mail scanning subsystem on %COMPUTERNAME% reported an error in the scan engine. %SOFTWARENAME% %SOFTWAREVERSION%
9552 The mail scanning subsystem on %COMPUTERNAME% reported an error initializing the most recently scanned buffer. %SOFTWARENAME% %SOFTWAREVERSION%
9553 The mail scanning subsystem on %COMPUTERNAME% reported a memory allocation error. %SOFTWARENAME% %SOFTWAREVERSION%
9554 The mail scanning subsystem on %COMPUTERNAME% reported an unknown error. %SOFTWARENAME% %SOFTWAREVERSION%
9555 An error occurred sending new options to the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9556 An error occurred sending exclude information to the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9557 Error sending move to folder exclude item to the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9558 An error occurred obtaining log data from the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9559 An error occurred while enabling the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9560 An error occurred while disabling the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9561 An error occurred while obtaining statistical data from the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9562 %TIME% %DATE% The file %FILENAME% is infected with the %VIRUSNAME% virus. The file was successfully cleaned. %SOFTWARENAME% %SOFTWAREVERSION%
9563 Infected mail attachment was cleaned.
9564 %TIME% %DATE% The file %FILENAME% is infected with the %VIRUSNAME% virus. Unable to clean the infected file. %SOFTWARENAME% %SOFTWAREVERSION%\n
9565 Unable to clean infected mail attachment.
9566 %TIME% %DATE% The mail attachment %FILENAME% is infected with the %VIRUSNAME% virus. The mail attachment was deleted. %SOFTWARENAME% %SOFTWAREVERSION%
9567 Infected mail attachment was deleted.
9568 %TIME% %DATE% The mail attachment %FILENAME% is infected with the %VIRUSNAME% virus. Unable to delete the mail attachment. %SOFTWARENAME% %SOFTWAREVERSION%
9569 Unable to delete the infected mail attachment.
9570 %TIME% %DATE% The file %FILENAME% is infected with the %VIRUSNAME% virus. %SOFTWARENAME% %SOFTWAREVERSION%
9571 Infected mail attachment found.
9572 %TIME% %DATE% The mail attachment %FILENAME% is infected with the %VIRUSNAME% virus. It was moved to a quarantine area. %SOFTWARENAME% %SOFTWAREVERSION%
9573 Mail attachment moved to quarantine.
9574 %TIME% %DATE% The mail attachment %FILENAME% is infected with the %VIRUSNAME% virus. Unable to move it to a quarantine area. %SOFTWARENAME% %SOFTWAREVERSION%
9575 Unable to quarantine mail attachment.
9576 Select installation type
9577 To select a type of installation, click the check box next to it.
