2111 Would you like to read the latest information about this product?
2112 Check if Enough Drive Space is available
2113 The Target location, "
2114 ", does not have the required %ld bytes available for installation.\n
2115 Please free additional space, change the target location, to a different disk, or remove a component from being installed.
2120 Setup
2121 Copying Common Data
2122 Transfering Files
2123 Operator Input Needed
2124 Severe Error During SETUP
2200 Unable to create a directory! \nDirectory:
2201 \nPlease check write access to this directory.
2202 Library File not found!
2203 A general error occurred during file transfer!
2204 An operation error occurred during file transfer!
2205 Error launching process!
2206 Error in packaging!
2207 An error occurred requiring a system reset!
2208 General file transfer error! Please check your target location and try again.\n\nError Number:
2209 There is not enough space available on the disk!\nDisk:
2210 Please free up some space or change the target location\nto a different disk.\nSpace needed:
2211 The disk inserted into the drive was not the disk Setup requested. Please insert the correct disk to continue
2212 Setup cannot launch an intermediate file needed to proceed with the installation. Files may be missing or damaged. Setup cannot continue.
2213 Setup needs you to insert the next disk into the drive to complete the installation process
2214 Setup was unable to overwrite a read only or in-use file. The required file cannot be installed at this time. Setup cannot continue.
2215 An error occurred while copying or decompressing the application files. The source media may be damaged. Setup cannot continue.
2500 This program requires VGA or better resolution!
2501 Failed to create key in registry!
2502 Failed to write to key in registry!
2503 Error finding Web Browser!
2504 Install query
2505 Setup has detected that there is or was a SCSI tape drive on your system.\n\nIf you choose to use tape as your storage media, McAfee's Tape File System \nwill be installed. This will require a reboot of your system.\nInstall McAfee's Tape File System?
2506 Copying Program Files...
2507 Creating Program Folder and Icons...
2508 Installation complete!
2509 Some files could not be installed because they are currently in use by \nother programs in the system. To allow for proper operation of the new \nprogram you should restart your system at this time.
2510 Reboot system
2511 McAfee's Tape File System has been installed.\n\nIn order to use this unique feature, it is required\nthat you reboot your sytem at this time.
2512 Choose Option
2513 Setup has installed all files needed.\nChoose one option from the following list: \n\n
2514 Launch
2515 now
2516 Sign up for the McAfee Personal Vault
2517 Finish Setup and go back to Windows
2518 McAfee's Tape IFS Successfully Installed!
2519 It is now strongly recommend that you run ISBOOT to create\nan essential boot disk for ImageStor to work from.\n\nTo do this, you will need to place a blank floppy\nin your A: drive.\n\nDo you wish to run ISBOOT now?
2550 Preparing Diskette for Transfer...
2551 SETUP is complete. To create your disastor recovery\nboot disk at a later time, run ISBOOT.
2552 Click on FINISH to exit setup.
2553 Ready to run!
2554 You may now run ImagStor from Windows. During the image\ncopy please refrain from using your system as it will\ninterfere with the integrity of the image copy.
2555 Yes, I want to run ImageStor now.
2556 No, I wish to return to Windows.
2557 SETUP is complete. \n\nStore the boot diskette you just made in a safe place.\nYou will need it in the event of a hard disk failure or\ncorruption.
2558 Click on FINISH to exit setup.
2580 Read Me 1st
2581 McAfee What's New in
2582 Boot Sector Virus Removal
2583 BBS Info
2584 McAfee License Info
2585 License Info for
2586 Would you like to review ?
3000 Scan System During Setup
3001 Setup can perform a comprehensive check of your system for viruses.
3002 Would you like to have Setup do this for you ?
3003 Scanning system for viruses...
3004 McAfee VirusScan Setup Alert
3005 Infected
3006 The virus scan did not complete sucessfully. Your machine may be infected with a virus !
3007 To minimize to possibility of virus infection, it is recommended that you allow Setup to remove
3008 from your system and cancel the installation.\n\nDo you want Setup to Cancel the Installation ?
3500 Failure Reading AUTOEXEC.BAT
3501 Failure Writing AUTOEXEC.BAT
3502 Delete VSHIELD.DAT If Exists
3503 Shut Down McAfee VShield
3504 McAfee VShield Configuration Manager
3505 VSHCFG16.EXE
3700 Shut Down McAfee VShield
3701 Delete VSHIELD.DAT if Exists
3702 VSHLDWIN.EXE
3703 McAfee VShield for Windows
3704 VSHCFG16.EXE
3705 McAfee VShield Configuration Manager
3800 McAfee VirusScan Help
3801 WSCAN for Windows
3802 Installing ACROBAT READER
3803 Getting Started Manual
3804 User Guide Manual
3900 Found a Copy of McAfee VirusScan Installed
3901 Setup has found
3902 installed on your computer. It is recommended that you Uninstall this older version before proceeding.\n\n
3903 Do you wish to CONTINUE with the installation, allow Setup to UNINSTALL the older version, or CANCEL the installation ?
3904 Select 'YES' to continue with the uninstall or 'NO' to cancel this installation.
3905 installed on your computer. In order to take advantage of VirusScan's New Technology, the previous version must be uninstalled before proceeding.\n\n
3906 Would you like to allow Setup to UNINSTALL the previous version of VirusScan or CANCEL the installation now?\n\n
3950 Found
3951 Installed !
3952 Setup has found
3953 installed on your computer. The previous installation must be uninstalled before continuing.
3954 Do you wish to UNINSTALL or CANCEL this installation ?
3970 McAfee VirusScan
3971 McAfee WebScanX
4000 Found Release Candidate installed!
4001 Setup has found
4002 installed on your computer. You should exit SETUP \nand use the Uninstall program found in the
4003 directory to uninstall it before continuing with setup.\n\nDo you wish to continue ?
4004 Found current version installed !
4005 Setup has found
4006 installed on your computer. It is recommended that you uninstall before proceeding.\n\n
4007 Do you wish to UNINSTALL, CONTINUE, or CANCEL ?
4008 Found previous version installed !
4009 Setup has found
4010 installed on your computer. This is a version earlier than the one you are attempting to install now.
4011 It is recommended that you Uninstall this older version before proceeding.\n\n
4012 Do you wish to CONTINUE with the installation, allow Setup to UNINSTALL the older version,
4013 or CANCEL the installation ?
4014 Continue
4015 Uninstall
4016 Cancel
4017 Found more recent version installed !
4018 Setup has found
4019 installed on your computer.
4020 This version is more recent than the version you are about to install.\n\n
4021 It is recommended that you first uninstall
4022 using it's uninstaller before proceeding.\n\nDo you wish to continue with the installation?
4025 The McAfee VirusScan Console cannot be installed without the McAfee VirusScan On-Demand Scanner.\n\nDo you wish to install both (yes) or neither (no)?
4026 The McAfee VirusScan Console cannot be installed without the McAfee VirusScan On-Demand Scanner.\n\nDo you wish to install both (yes) or neither (no)?
4027 The cc:Mail Scan cannot be installed without McAfee VShield.\n\nDo you wish to install both (yes) or neither (no) ?
4028 The McAfee VirusScan Scheduler cannot be installed without the McAfee VirusScan On-Demand Scanner.\n\nDo you wish to install both (yes) or neither (no)?
4029 The McAfee VirusScan Scheduler cannot be installed without the McAfee VirusScan On-Demand Scanner.\n\nDo you wish to install both (yes) or neither (no)?
4030 Select
4031 Installation Options
4032 Please select the options you would like Setup to configure.
4033 Common components can not be left unselected.
4035 The Exchange Scan cannot be installed without McAfee VShield.\n\nDo you wish to install both (yes) or neither (no) ?
4036 McAfee VirusScan Central cannot be installed without McAfee VirusScan Scheduler and\nMcAfee VirusScan On-Demand Scanner.\n\nDo you wish to install them all (yes) or none (no)?
4037 You are about to install an older version of this product, do you wish to continue?
4038 Older Version Detected
4040 Copying Anti-Virus definition files...
4041 Copying
4042 files...
4043 Copying common library files...
4044 Copying Common General
4060 Scanning system area for viruses...
4061 McAfee VirusScan Alert - Virus Found!
4062 McAfee VirusScan has detected a virus during installation. Network Associates recommends that you first install McAfee VirusScan on an uninfected computer in accordance with the terms of your license.
4063 Next, create an emergency disk from the uninfected computer, write-protect the disk, and then use it to remove the infection(s).\n\nDo you want Setup to cancel this installation ?
4064 Scan of system area is complete. No viruses were found.\n\n Press OK to continue.
4080 Shutdown McAfee VShield
4081 Delete VSHIELD.DAT if available
4100 Create
4101 Start
4102 McAfee Alert Manager
4103 Network Associates Alert Manager
4120 MCCONSOL.EXE
4121 Console
4130 AMGRCNFG.EXE
4131 Alert Manager
4140 SCAN32.EXE
4141 McAfee VirusScan
4150 VSHLDWIN.EXE
4151 McAfee VShield for Windows
4160 SCAN32.HLP
4161 McAfee VirusScan Help
4170 CONFIG32.EXE
4171 McAfee VirusScan Configuration Manager
4180 VSHLDCFG.HLP
4181 Online Help for McAfee VShield Configuration Manager
5007 Error determining possible upgrade! Assuming new install...
5008 Error processing Path information!
5009 Error Parsing Ini File! Aborting Install.
5010 Incorrect Version
5011 Installation terminated by the user!
5012 VirusScan NT may not be installed on a NT Server. Proceed with remote install?
5013 Remote installs not supported on this platform, proceed with local install?
5014 Remote Install Unavailable
5015 Setup Notification
5016 VirusScan Console requires the Taskmanager. Please check this item to continue.
5050 Setup will install the Application in the Destination Directory.\n\nTo install in the Destination Directory, choose Next > Button.\n\nTo install in a different directory, choose Browse... Button.
5051 Setup will install the Application in the Destination Directory.\n\nTo install in the Destination Directory, choose Next > Button.\n\nTo install in a different directory, choose Browse... Button.
5052 Choose which program you wish to install.\nClick NEXT to continue the installation.
5500 Confirm Installation Settings
5501 Setup has enough information to begin copying
5502 files to your computer and complete the installation. Listed below is a summary of the changes setup will make to your system.\n\n
5503 If you want to review or change any of these settings, please press BACK now.
5504 If you are satisfied with the settings, press NEXT to proceed with the file transfer.
5530 User Information:
5531 Name:
5532 Company:
5560 Target Directory:
5561 Selected Components - TYPICAL:
5562 Selected Components - COMPACT:
5563 Selected Components - CUSTOM:
5564 Program Folder:
5565 None
5600 McAfee VirusScan for DOS
5601 On-demand virus scanning for the DOS environment.
5610 McAfee VShield
5611 On-Access Protection from Viruses.
5620 McAfee VirusScan for Windows
5621 On-demand and scheduled virus scanning for the Windows environment.
5630 McAfee VirusScan
5631 Software to provide comprehensive protection from virus infection, including Internet, e-mail, and Word macro viruses.
5640 McAfee ScreenScan
5641 Provides virus protection by scanning your system automatically whenever your screen saver is active.
5645 McAfee ScreemScan Screen Saver
5646 Not for the faint of heart, this screen saver is likely to make you scream! Install this component at your own risk.
5650 CrashMonitor
5651 Provides crash protection by monitoring your system's applications and resources constantly, restarting stopped applications and alerting you when resources get low. Stop crashes before they stop you!
5655 CrashMonitor must be selected for the installation to continue.\n\nDo you wish to install this component?
5656 CrashMonitor Not Selected
5657 Do you wish to continue with the installation?
5658 Exit Install
5700 Command Line Scanner
5701 McAfee VShield On-Access Scanner
5702 McAfee VirusScan On-Demand Scanner
5703 McAfee ScreenScan
5704 McAfee VirusScan Console
5705 McAfee VirusScan Scheduler
5706 McAfee VirusScan Central
5707 MAPI On-Demand Scanner
5708 McAfee VirusScan Central/Scheduler
5710 Command Line Scanner
5711 McAfee VShield On-Access Scanner
5713 McAfee VirusScan On-Demand Scanner
5714 McAfee VirusScan Console
5715 Common Components
5716 McAfee VirusScan Central
5720 DOS/Command Line virus protection.
5721 Background scanner for Windows 3.1x providing protection from known and unknown viruses
5723 User initiated scanner for known and unknown viruses located on local and network drives
5724 Tool for administering scans
5725 Central Interface for administering scans
5750 DOS/Command Line virus protection.
5751 Background scanner for Windows 9x providing protection from known and unknown viruses
5752 User initiated scanner for known and unknown viruses located on local and network drives
5753 Windows 9x screen saver enhancement providing automatic virus scanning whenever your screen saver is active
5754 Scans your system for viruses while you work. It includes technology that guards against hostile Java applets, ActiveX controls, and Internet sites.
5756 Administrative tools and utility for scheduling scans
5757 Components required for all products
5758 User initiated scanner for known and unknown viruses within your exchange client.
5759 Graphical Interface for launching program components, configuring on-access scanning and performing product updates.
5780 McAfee VirusScan Options
5800 Scan system area for viruses during setup
5801 Skip system area scan
5802 Add right mouse click access for virus scanning
5803 No context sensitive scanning
5820 Preparing file transfer...
5821 Migrating Data...
5822 Configuring System...
5823 Creating Program Folder and Icons...
5840 Severe Setup Error Encountered
5841 A severe error has occurred which caused the installation to abort. Please correct the problem and rerun the Setup program.
5842 Changes Made
5843 To store configuration information, Setup has made modifications to the file(s) listed below. Setup has also made a backup for any file which was updated.
5861 Setup has finished copying files to your computer.\n\nBefore you can take advantage of the new components, you must restart your computer.
5862 Setup has finished copying files to your computer.\n\nYour system is now ready to use the newly installed components.
5880 Error Encountered
5881 Impossible setup type selected, please retry.
5882 No Components Selected!
5883 You have not selected any components to install on this computer. Setup will not be able to continue
5884 with these settings. Please correct this situation by choosing to install at least one
5885 product component or by clicking cancel to quit the Setup program.
5886 Only Common Components Selected!
5887 Setup will not be able\nto continue with these settings. Please correct this situation by choosing at least one product\ncomponent or by clicking cancel to quit the Setup program.
5888 You have only selected common components to install on this computer.
5889 You have not selected any components to install on this computer.
6000 Unsupported operating system detected
6001 This version of
6002 is not designed to operate on the version of Windows you are currently running.
6003 Please consult the products' documentation for a list of supported platforms.
6010 Insufficient User Privileges
6011 This product requires that you be logged into the computer as a user with ADMINISTRATIVE privileges.
6012 Setup has determined that the current account does not have this privilege.
6013 Please login as the Administrator or equivalent and re-install the product.
6020 Previous Software Found
6021 Setup has found the following product on your system:\n\n
6022 \nIt is highly recommended that you first Uninstall the above product before proceeding with the installation of
6023 .\n\nWould you like to continue with Setup?
6040 Not Enough Components Selected!
6041 You have selected to install the
6042 component but have not selected any other components to install. This component requires that you install one of the other
6043 components. Setup will not be able continue with these settings. Please correct this situation by choosing to install at least another
6044 product component or by clicking cancel to quit the Setup program.
6100 WebScanX Upgrade Error
6101 Setup has detected an error while trying to upgrade WebScanX.\nPlease uninstall WebScanX manually before this installation can continue.
6200 Choose Console Component Directory
6201 Please select the directory where you want the
6202 console components installed.
7000 Service Account Usage
7001 In order for this product to access network resources,
7002 services must be started with an administrative user account that you specify. Examples where this product can use network resources include forwarding alerts to other computers,
7003 performing automated updates of virus definition files, and performing scheduled scans of network drives. You may want to consider allowing this account to have a non-expiring password.
7004 \n\nIf you do not want to specify a custom account during installation, select the "Use the SYSTEM Account" option on the next dialog box. The SYSTEM account will only be able to access resources on this computer.
7005 \n\nPlease note that you can change the Service account options later through the Services applet in the Control Panel.
7010 Service Account Information
7020 The
7021 Task
7040 service started successfully.
7041 service ended successfully.
7042 Task started successfully.
7043 Task %TASKNAME% was successfully started on %COMPUTERNAME%.
7044 service started successfully on %COMPUTERNAME%.
7045 service ended successfully on %COMPUTERNAME%.
7050 Error starting Task.
7051 Task %TASKNAME% encountered an error while attempting to start on %COMPUTERNAME%.
7060 Task has completed successfully.
7061 Task %TASKNAME% has completed successfully on %COMPUTERNAME%.
7070 Error while stopping task.
7071 Error stopping task %TASKNAME% on %COMPUTERNAME%.
7080 Infected file found.
7081 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%.
7090 Infected file successfully cleaned.
7091 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. The file was successfully cleaned.
7100 Unable to clean infected file.
7101 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to clean file. Cleaner unavailable or unable to access the file.
7110 Infected file deleted.
7111 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. The file was successfully deleted.
7120 Unable to delete infected file.
7121 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to delete infected file. Verify access to file.
7130 File to be excluded from scans.
7131 The file %FILENAME% on %COMPUTERNAME% will be excluded from further scans.
7140 Unable to exclude item from scans.
7141 Unable to exclude %FILENAME% on %COMPUTERNAME% from further scans.
7150 Infected file access denied.
7151 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Access to file denied.
7160 Infected file was moved to quarantine area.
7161 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. The infected file was moved to quarantine.
7170 Unable to move infected file to quarantine.
7171 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to move file in quarantine area. Verify file access.
7180 Scan task completed. No viruses found.
7181 The task %TASKNAME% on %COMPUTERNAME% completed. No infected files were found.
7190 Task was cancelled.
7191 The task %TASKNAME% on %COMPUTERNAME% was cancelled.
7200 Virus found in Memory.
7201 The task %TASKNAME% on %COMPUTERNAME% found the system's memory infected with a virus.
7210 Infected boot record found
7211 The task %TASKNAME% on %COMPUTERNAME%found an infected boot record.
7220 Task found infected files.
7221 The task %TASKNAME% on %COMPUTERNAME% found infected files.
7230 Task found and cleaned infected files.
7231 The task %TASKNAME% on %COMPUTERNAME% found and cleaned infected files.
7240 Task error while accessing activity log file.
7241 The task %TASKNAME% on %COMPUTERNAME% reported an error accessing the activity log file.
7250 Task reports memory allocation error.
7251 The task %TASKNAME% on %COMPUTERNAME% reported a memory allocation error.
7260 Directory length access error.
7261 The directory path name is too long. The task %TASKNAME% on %COMPUTERNAME% could not scan some items in the specified location.
7270 Media is write protected.
7271 The task %TASKNAME% on %COMPUTERNAME% could not access due to media write protection.
7280 Specified media not found.
7281 The task %TASKNAME% on %COMPUTERNAME% could not find the specified media.
7290 Specified scan item is invalid.
7291 The task %TASKNAME% on %COMPUTERNAME% found an invalid scan item.
7300 File I/O errors.
7301 The task %TASKNAME% on %COMPUTERNAME% reported a file I/O error.
7310 Disk I/O errors.
7311 The task %TASKNAME% on %COMPUTERNAME% reported a disk I/O error.
7312 %SOFTWARENAME% %SOFTWAREVER%
7320 Task reports general system error.
7321 The task %TASKNAME% on %COMPUTERNAME% reported a general system error.
7330 Task reported an internal application error.
7331 The task %TASKNAME% on %COMPUTERNAME% reported an internal application error. %SOFTWARENAME% %SOFTWAREVERSION%
7340 Error opening Service Manager.
7341 An Error occurred while trying to open the WinNT Service Manager on %COMPUTERNAME%.
7350 Error starting drivers.
7351 An Error occurred while starting the drivers on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7360 Error occurred starting log subsystem.
7361 An error occurred while starting the log subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7370 Error obtaining device driver versions.
7371 An error occurred while obtaining device driver versions on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7380 Invalid virus signature files.
7381 The device driver on %COMPUTERNAME% reported invalid virus signature files. %SOFTWARENAME% %SOFTWAREVERSION%
7390 Scan engine error.
7391 The device driver on %COMPUTERNAME% reported an error in the scan engine. %SOFTWARENAME% %SOFTWAREVERSION%
7400 Initialization error with scan buffer.
7401 The device driver on %COMPUTERNAME% reported an error initializing the most recently scanned buffer. %SOFTWARENAME% %SOFTWAREVERSION%
7410 Memory allocation error.
7411 The device driver on %COMPUTERNAME% reported a memory allocation error. %SOFTWARENAME% %SOFTWAREVERSION%
7420 Unknown error reported.
7421 The device driver on %COMPUTERNAME% reported an unknown error. %SOFTWARENAME% %SOFTWAREVERSION%
7430 Error sending new options to device driver.
7431 An error occurred sending new options to the device driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7440 Error sending exclude information to the driver.
7441 An error occurred sending exclude information to the driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7450 Error sending move to folder exclude item to the driver.
7451 Error sending move to folder exclude item to the driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7460 Error obtaining log data from device driver.
7461 An error occurred obtaining log data from the device driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7470 Error occurred while enabling driver.
7471 An error occurred while enabling the driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7480 Error occurred while disabling driver.
7481 An error occurred while disabling the driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7490 Error while obtaining statistical data from driver.
7491 An error occurred while obtaining statistical data from the device driver on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7500 Error while trying to open/create activity log file.
7501 An error occurred while trying to open/create activity log file on %COMPUTERNAME%.
7510 Activity log file maximum size reached.
7511 The activity log file reached maximum user defined size on %COMPUTERNAME%. File has been truncated.
7520 Error launching a program upon virus infection.
7521 An error occurred on %COMPUTERNAME% while launching a program upon virus infection. %SOFTWARENAME% %SOFTWAREVERSION%
7530 Error during initialization of the activity log file.
7531 An error occurred during initialization of the activity log file on %COMPUTERNAME%. Possible memory allocation error. %SOFTWARENAME% %SOFTWAREVERSION%
7540 Remove
7541 service from
7542 Wait for
7543 to be removed
7550 Unable to write the activity log file.
7551 Unable to write the activity log file on %COMPUTERNAME%. Disk is full.
7560 Memory grant unavailable.
7561 The operating system on %COMPUTERNAME% was unable to grant additional memory.
7562 Error writing to log
7563 Error writing to the Activity log file on %COMPUTERNAME%.
7570 Error stopping drivers
7571 An Error occurred while stopping the drivers on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
7572 New File Virus Found
7573 The file %FILENAME% on %COMPUTERNAME% is possibly infected with a new virus.
7574 New File Virus Found And Deleted
7575 The file %FILENAME% on %COMPUTERNAME% is possibly infected with a new virus. The file was successfully deleted.
7576 New File Virus Found But Delete Failed
7577 The file %FILENAME% on %COMPUTERNAME% is possibly infected with a new virus. Unable to delete infected file.
7578 New File Virus Found And Moved
7579 The file %FILENAME% on %COMPUTERNAME% is possibly infected with a new virus. The infected file was moved to quarantine area.
7580 The file %FILENAME% on %COMPUTERNAME% is possibly infected with a new virus. Unable to move infected file to quarantine area.
7581 MBR Virus Found
7582 The partition record of disk %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%.
8000 Drivers in Use
8001 Setup has detected that your system is running the following drivers which
8002 needs to install:\n
8003 \nThis is most likely the result of not rebooting after uninstalling a product which uses these drivers.
8004 While these drivers are running, Setup will be unable to complete sucessfully.
8005 In order to properly install this product, you need to restart your system and run Setup again.
8006 Do you wish to continue with Setup anyway ?
8010 McAfee Task Manager
8011 McAfee Alert Manager
8020 currently installed
8021 Setup detected an earlier version of this product on your computer. Would you like to upgrade this version?\nNote: Please close any open
8022 windows before proceeding.
8023 installation while these services are running, the installation may not be sucessful or the product may not function correctly.
8024 In order to properly install this product, Setup needs to temporarily disable the service(s).\n\n
8025 Do you wish to have Setup disable the service(s)?
8030 Select System Options
8031 Please select which options you would like enabled for
8032 NOTE: Setup recommends that the services be started automatically on startup for mission critical systems.
8040 Choose Server Component Directory
8041 Please select the directory where you want the
8042 server components installed into. \nNote: you MUST be the Supervisor or have equivalent rights in order to proceed.
8050 Insufficient Rights
8051 Setup has determined that you do not have sufficient rights to the directory you have specified.
8052 Please select another server or reattach with an account with appropriate rights.
8060 An error occurred while trying to remove the previous product or stop the SNMP service on your computer.
8061 Options
8062 \nIt is strongly recommended you perform the manual uninstallation procedure documented in the Whatsnew.txt file. Do you still wish to proceed with the installation?
8070 Server
8071 Services and drivers required for server protection.
8080 AlertManager
8081 McAfee Alert Manager
8090 McTaskManager
8091 McAfee Task Manager
8100 McFilter
8101 McAfee File System Filterer
8110 McFsrec
8111 McAfee File System Recognizer
8120 McKrnl
8121 McAfee I/O Interface
8130 McScan
8131 McAfee Scanning Engine
8140 McShield
8141 McAfee On-Access Scanning Engine
8150 McUtil
8151 McAfee Utilities
8160 Scan
8170 Create
8171 Start
8200 Automatically start Task Manager on system startup.
8201 Start Task Manager upon completion of installation.
8202 Add "Scan For Viruses" item to context menu.
8300 Start TaskManager on Startup
8301 Start TaskManager at end of Setup
8320 Install context sensitive scanning
8400 Incorrect Operating System
8401 This version of
8402 is not designed to operate on the version of Windows you are currently running.
8403 Please consult the products documentation for a list of supported platforms.
8410 VShield Found in Memory
8411 Setup has detected that VShield on-access virus protection is currently enabled on your system. In order for Setup to update
8412 , McAfee VShield must be disabled and removed from memory before continuing. After Setup is complete,
8413 you will need to restart your system to re-enable McAfee VShield. Do you wish to continue installation?
8420 Scan for &Viruses
8430 Curves and Colors.scr
8440 Select McAfee VirusScan Installation Options
8441 Select McAfee VShield Installation Options
8442 Please select the options you would like Setup to configure.
8443 Load McAfee VShield at Windows startup
8444 Do not load McAfee VShield automatically
8445 Scan MBR, memory, and system files at bootup
8446 Do not scan MBR, memory, and system files at bootup
8447 Add the target directory to the path
8448 Do not append the target directory to the path
8451 Create Emergency Disk
8452 Do not create Emergency Disk
8453 Save previous McAfee VirusScan PROFILES as new VSC format
8456 Please select the option(s) you would like Setup to configure.
8457 A previous version of this product has been detected. You are about to install an evaluation copy which will void your previous license agreement and disable future upgrades and updates. Do you wish to continue?
8460 Unsupported Operating System
8461 This version of
8462 is not designed to operate on the version of Windows you are currently running. This version of
8463 is designed for Microsoft Windows NT Workstation 3.51 or later. Please consult the products' documentation for more information.
8465 Insufficient User Privileges
8466 This product requires that you be logged into the computer as a user with ADMINISTRATIVE privileges.
8467 Setup has determined that the current account does not have this privilege.
8468 Please login as the Administrator or equivalent and re-install the product.
8470 Previous Software Found
8471 Setup has found the following product on your system:\n\n
8472 \nIt is highly recommended that you first Uninstall the above product before proceeding with the installation of
8473 .\n\nWould you like to continue with Setup?
8475 Error Encountered
8476 Impossible setup type selected, please retry.
8477 No Components Selected!
8478 You have not selected any components to install on this computer. Setup will not be able continue with these settings.
8479 Please correct this situation by choosing to install at least one product component or by clicking cancel to quit the Setup program.
8480 The path that you have chosen may have invalid characters in it. Please re-enter a new path or click the cancel button to restore the last valid directory path.
8481 The path that you have chosen is invalid, you may not chose the root directory of any drive. Please re-enter a new path or click the cancel button to restore the last valid directory path.
8490 Unable to Install
8491 This product can only be installed onto a local, fixed drive. The one you have chosen is not such a drive. Please select a different drive to install to.
8492 Password mismatch
8493 The password you entered does not match the password you confirmed with. Please correct to make sure these match before proceeding.
8494 The password you entered does not match the password you confirmed with. Please correct to make sure these match before proceeding.
8500 The installation did not complete successfully.
8501 Silent installation of
8502 in progress...
8503 Silent installation completed.
8504 Initializing...
8505 Uninstalling currently installed version...
8506 Determining installation options...
8507 Copying files...
8508 Configuring options...
8509 Do you accept all the terms of the preceding License Agreement? If you choose No, Setup will close. To install this product, you must accept this agreement.
8510 Startup
8550 Centralized Alerting - Scan completed. No viruses found.
8551 The scan on %COMPUTERNAME% completed. No infected files were found. %SOFTWARENAME% %SOFTWAREVERSION%
8555 Centralized Alerting - Scan was cancelled.
8556 The scan on %COMPUTERNAME% was cancelled by %USERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
8560 Centralized Alerting - Virus found in Memory.
8561 The scan on %COMPUTERNAME% found the system's memory infected with a virus. %SOFTWARENAME% %SOFTWAREVERSION%
8565 Centralized Alerting - Infected boot record found.
8566 The scan on %COMPUTERNAME% found an infected boot record. %SOFTWARENAME% %SOFTWAREVERSION%
8570 Centralized Alerting - Scan found infected files.
8571 The scan on %COMPUTERNAME% found infected files. %SOFTWARENAME% %SOFTWAREVERSION%
8575 Centralized Alerting - Scan found and cleaned infected files.
8576 The scan on %COMPUTERNAME% found and cleaned infected files. %SOFTWARENAME% %SOFTWAREVERSION%
8580 Centralized Alerting - Error while accessing activity log file.
8581 The scan on %COMPUTERNAME% reported an error accessing the activity log file. %SOFTWARENAME% %SOFTWAREVERSION%
8591 The directory path name is too long. The scan on %COMPUTERNAME% could not scan some items in the specified location. %SOFTWARENAME% %SOFTWAREVERSION%
8595 Centralized Alerting - Media is write protected.
8596 The scan on %COMPUTERNAME% could not access the media due to write protection. %SOFTWARENAME% %SOFTWAREVERSION%
8600 Centralized Alerting - Specified media not found.
8601 The scan on %COMPUTERNAME% could not find the specified media. %SOFTWARENAME% %SOFTWAREVERSION%
8605 Centralized Alerting - Specified scan item is invalid.
8606 The scan on %COMPUTERNAME% found an invalid scan item. %SOFTWARENAME% %SOFTWAREVERSION%
8610 Centralized Alerting - File I/O errors.
8611 The scan on %COMPUTERNAME% reported a file I/O error. %SOFTWARENAME% %SOFTWAREVERSION%
8615 Centralized Alerting - Disk I/O errors.
8616 The scan on %COMPUTERNAME% reported a disk I/O error. %SOFTWARENAME% %SOFTWAREVERSION%
8620 Centralized Alerting - Scan reports general system error.
8621 The scan on %COMPUTERNAME% reported a general system error. %SOFTWARENAME% %SOFTWAREVERSION%
8625 Centralized Alerting - Scan reported an internal application error.
8626 The scan on %COMPUTERNAME% reported an internal application error. %SOFTWARENAME% %SOFTWAREVERSION%
9000 WebShield for Windows
9001 Background scanner providing protection for the internet and mail programs
9002 WebShield
9010 WSPCGUI.EXE
9011 WebShield
9012 WSPCGUI.HLP
9013 WebShield Help
9050 Restarting Windows
9051 Setup has found a previous installation and must first reboot the computer before continuing.\n\n
9052 WARNING: If Setup is cancelled, WebScanX should be reconfigured to load at startup using its configuration manager.
9060 McAfee WebScanX Configuration Manager
9061 WEBCFG32.EXE
9062 McAfee WebScanX Help
9064 cc:Scan
9065 CCSCAN.EXE
9066 McAfee WebScanX
9067 WEBSCNX.EXE
9100 McAfee WebScanX for Windows
9101 On-Access scanner providing protection from the internet and mail programs
9102 McAfee WebScanX
9105 Scan components required for cc:Mail scan (non-mapi programs such as Lotus cc:Mail 5 and 6)
9106 cc:Mail Scan
9110 WEBSCANX.EXE
9111 WEBSCANX.HLP
9115 McAfee WebScanX Not Selected
9116 WebScanX must be selected for the installation to McAfee continue.\n\nDo you wish to install this component?
9117 Exit Install
9118 Do you wish to continue with the installation?
9120 McAfee WebScanX
9121 McAfee WebScanX Help
9122 No server has been selected
9123 Netshield Netware will not run from a long filename directory.\nPlease choose a directory which fits the 8.3 filename convention.
9124 You have specified a directory which is not valid.\nPlease include the leading "\", and choose a valid directory.
9125 No destination directory selected.
9126 Client32 support not found. Setup can continue the installation without creating the NDS object on this server. \nTo create the object manually, run NSHINST.NLM on the server once the installation is finished. \n\nDo you want to continue installing to this server without NDS object creation ?
9127 The user authenticated to this server does not have sufficient rights to create an NDS object to that path. Setup can continue the installation without creating the NDS object on this server. \nTo create the object manually, execute NSHINST.NLM on the server once the installation is finished. \n \nDo you want to continue installing to this server without NDS object creation ?
9128 The NDS context you have specified is invalid.
9129 Setup was unable to attach to NDS context. \nVerify that the server you're installing to is 4.x, that Client32 is installed, and that the context you entered is valid. Setup can continue the installation without creating the NDS object on this server. \nTo create the object manually, execute NSHINST.NLM on the server once the installation is finished. \n\nDo you want to continue installing to this server without NDS object creation ?
9130 CCS_CFG.EXE
9131 McAfee cc:Scan Configuration Manager
9500 Centralized Alerting - Infected file found.
9501 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9506 The file %FILENAME% on %COMPUTERNAME% was infected with the virus %VIRUSNAME%. The file was successfully cleaned. %SOFTWARENAME% %SOFTWAREVERSION%
9510 Centralized Alerting - Unable to clean infected file.
9511 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to clean the file. %SOFTWARENAME% %SOFTWAREVERSION%
9516 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. The file was successfully deleted. %SOFTWARENAME% %SOFTWAREVERSION%
9520 Centralized Alerting - Unable to delete infected file.
9521 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to delete the infected file. %SOFTWARENAME% %SOFTWAREVERSION%
9525 Centralized Alerting - File to be excluded from scans.
9526 The file %FILENAME% on %COMPUTERNAME% will be excluded from further scans. %SOFTWARENAME% %SOFTWAREVERSION%
9530 Centralized Alerting - Unable to exclude item from scans.
9531 Unable to exclude %FILENAME% on %COMPUTERNAME% from further scans. %SOFTWARENAME% %SOFTWAREVERSION%
9536 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Access to the file was denied. %SOFTWARENAME% %SOFTWAREVERSION%
9540 Centralized Alerting - Infected file was moved to quarantine area.
9541 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. The infected file was moved to quarantine area. %SOFTWARENAME% %SOFTWAREVERSION%
9545 Centralized Alerting - Unable to move infected file to quarantine.
9546 The file %FILENAME% on %COMPUTERNAME% is infected with the virus %VIRUSNAME%. Unable to move the file to the quarantine area. %SOFTWARENAME% %SOFTWAREVERSION%
9547 Sender: %SENDER% Recipient: %RECIPIENT%
9548 An Error occurred while starting the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9549 Error obtaining mail scanning versions.
9550 An error occurred while obtaining mail scanning version on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9551 The mail scanning subsystem on %COMPUTERNAME% reported an error in the scan engine. %SOFTWARENAME% %SOFTWAREVERSION%
9552 The mail scanning subsystem on %COMPUTERNAME% reported an error initializing the most recently scanned buffer. %SOFTWARENAME% %SOFTWAREVERSION%
9553 The mail scanning subsystem on %COMPUTERNAME% reported a memory allocation error. %SOFTWARENAME% %SOFTWAREVERSION%
9554 The mail scanning subsystem on %COMPUTERNAME% reported an unknown error. %SOFTWARENAME% %SOFTWAREVERSION%
9555 An error occurred sending new options to the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9556 An error occurred sending exclude information to the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9557 Error sending move to folder exclude item to the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9558 An error occurred obtaining log data from the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9559 An error occurred while enabling the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9560 An error occurred while disabling the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9561 An error occurred while obtaining statistical data from the mail scanning subsystem on %COMPUTERNAME%. %SOFTWARENAME% %SOFTWAREVERSION%
9562 %SENDER% sent a message to %RECIPIENT% with the file attachment %FILENAME% which was infected with the %VIRUSNAME% virus. The file attachment was successfully cleaned.
9563 Infected mail attachment was cleaned.
9564 %SENDER% sent a message to %RECIPIENT% with the file attachment %FILENAME% which is infected with the %VIRUSNAME% virus. The file attachment could not be successfully cleaned.
9565 Unable to clean infected mail attachment.
9566 %SENDER% sent a message to %RECIPIENT% with the file attachment %FILENAME% which was infected with the %VIRUSNAME% virus. The file attachment was deleted from the message.
9567 Infected mail attachment was deleted.
9568 %SENDER% sent a message to %RECIPIENT% with the file attachment %FILENAME% which is infected with the %VIRUSNAME% virus. The file attachment could not be deleted from the message.
9569 Unable to delete the infected mail attachment.
9570 %SENDER% sent a message to %RECIPIENT% with the file attachment %FILENAME% which is infected with the %VIRUSNAME% virus.
9571 Infected mail attachment found.
9572 %SENDER% sent a message to %RECIPIENT% with the file attachment %FILENAME% which was infected with the %VIRUSNAME% virus. The file attachment was quarantined at the server %COMPUTERNAME%.
9573 Mail attachment moved to quarantine.
9574 %SENDER% sent a message to %RECIPIENT% with the file attachment %FILENAME% which is infected with the %VIRUSNAME% virus. The file attachment could not be quarantined.
9575 Unable to quarantine mail attachment.
9576 Installation Destination
9577 Please select a destination for installing %P.
9578 &Local installation
9579 &Remote installation
9580 McAfee Groupshield Task Manager
9581 GroupShield On-Access Monitor
9582 The file attachment %FILENAME% (attached) was infected with the %VIRUSNAME% virus. The file attachment was successfully cleaned.
9583 The message you sent to %RECIPIENT% had the file attachment %FILENAME% which was infected with the %VIRUSNAME% virus. The file attachment was successfully cleaned.
9584 The file attachment %FILENAME% is infected with the %VIRUSNAME% virus. The file attachment could not be successfully cleaned.
9585 The message you sent to %RECIPIENT% has the file attachment %FILENAME% which is infected with the %VIRUSNAME% virus. The file attachment could not be successfully cleaned.
9586 This message had a file attachment %FILENAME% which was infected with the %VIRUSNAME% virus. The file attachment was deleted from this message.
9587 The message you sent to %RECIPIENT% had the file attachment %FILENAME% which was infected with the %VIRUSNAME% virus. The file attachment was deleted from the message.
9588 This message has a file attachment %FILENAME% which is infected with the %VIRUSNAME% virus. The file attachment could not be deleted from the message.
9589 The message you sent to %RECIPIENT% has a file attachment %FILENAME% which is infected with the %VIRUSNAME% virus. The file attachment could not be deleted from the message.
9590 WARNING: The file attachment %FILENAME% is infected with the %VIRUSNAME% virus.
9591 The message you sent to %RECIPIENT% has the file attachment %FILENAME% which is infected with the %VIRUSNAME% virus.
9592 This message had a file attachment %FILENAME% which was infected with the %VIRUSNAME% virus. The file attachment was quarantined at the server %COMPUTERNAME%.
9593 The message you sent to %RECIPIENT% had the file attachment %FILENAME% which was infected with the %VIRUSNAME% virus. The file attachment was quarantined at the server %COMPUTERNAME%.
9594 This message has a file attachment %FILENAME% which is infected with the %VIRUSNAME% virus. The file attachment could not quarantined.
9595 The message you sent to %RECIPIENT% has a file attachment %FILENAME% which is infected with the %VIRUSNAME% virus. The file attachment could not be quarantined.
9596 On-Access Monitor
9597 Microsoft Exchange not found.
9598 Setup could not find any components of Microsoft Exchange installed on this system. To be installed properly, the Groupshield Console requires the Microsoft Exchange Administrator,
9599 and the Microsoft Exchange Server is required for the GroupShield Task Manager.\nOnly multi-server installation is available.
9600 Boot record infection cleaned
9601 The boot record of %FILENAME% on %COMPUTERNAME% infected with the virus %VIRUSNAME% was successfully cleaned.
9602 Boot record infection clean error.
9603 The boot record of %FILENAME% on %COMPUTERNAME% is infected with virus %VIRUSNAME%. Unable to clean boot record. Cleaner unavailable or unable to access the disk.
9700 NetShield Console
9701 VirusScan Anti-Virus Console
9702 Administration Tools
11000 The destination directory could not be created.
11001 There is insufficient memory to copy the file(s). Please close some applications to free up memory and try again.
11002 There is insufficient disk space to copy the file(s).
11003 The file could not be located in the path specified. Please check the path or file name and try again.
11004 Setup was unable to copy the specified file(s). Please try again.
11005 Setup was unable to overwrite a file with the read-only attribute in the target directory. Please remove the read-only attribute and try again.
11006 Setup was unable to copy the specified file(s). Please try again.
11010 Unable to Copy DEFAULT.VSC
11011 Unable to Copy DEFAULT.VSH
11012 Program will be installed with minimum required options. Recommended for those users with laptops or limited resources.
11013 Program will be installed with Remote Administation Console only.
11014 The License file was not found. Installation will not continue.
11015 License Not Found
11016 Setup cannot find the file %s.\nThis file is required for proper setup of this product. Setup will not continue.
11017 File Not Found
15000 Setup
15001 VirusScan NT Setup is preparing the InstallShield wizard which will guide you through the rest of the Setup process. Please wait.
15002 VirusScan NT
15003 (Licensed)
15004 It is strongly recommended that you exit all Windows programs before running this Setup program.
15005 Click Cancel to quit Setup and then close any programs you have running. Click Next to continue with the Setup program.
15006 WARNING: This program is protected by copyright law and international treaties.
15007 Unauthorized reproduction or distribution of this program, or any portion of it, may result in severe civil and criminal penalties, and violators will be prosecuted to the maximum extent possible under law.
15008 &Next >
15009 Cancel
15010 Exit Setup
15011 Setup is not complete. If you quit the Setup program now, the program will not be installed.
15012 You may run the Setup program at a later time to complete the installation.
15013 To continue installing the program, click Resume. To quit the Setup program, click Exit Setup.
15014 &Resume
15015 E&xit Setup
15016 Please read the following License Agreement. Press the PAGE DOWN key to see the rest of the agreement.
15017 < &Back
15018 &Yes
15019 &No
15020 Setup has determined that there are some drivers which will conflict with the installation of this product. Please uninstall and reboot your machine in order for Setup to install VirusScan properly. Do you want Setup to reboot your machine for you ?
15021 Setup has found previous components of this product. Setup can uninstall them for you, over write your previous settings, or install over them and preserve the settings you had.
15022 Preserve
15023 This option preserves your settings, allowing you to upgrade, while retaining your configuration.
15024 Uninstall
15025 This option uninstalls the current version before installing this one. All current settings will be lost.
15026 Please select the type of installation for this product.
15027 Choose this option to install this product to this computer.
15028 Choose this option to install this product to one or more remote computers on your network. Only valid components will be installed will be installed on these computers. For a list of valid components, please consult the whatsnew.txt file.
15029 Setup Type
15030 Previous Installation Found
15031 Click the type of Setup you prefer, then click Next.
15032 Typical
15033 Program will be installed with the most common options. Recommended for most users.
15034 Compact
15035 Custom
15036 You may choose the options you want to install. Recommended for advanced users.
15037 Destination Directory
15038 B&rowse...
15040 In order for this product to access network resources, the services must be started with an administrative user account that you specify.
15041 Examples where this product can use network resources include forwarding alerts to other computers, and performing automated updates of virus definition files.
15042 If you do not want to specify a custom account during installation, select the "Use the SYSTEM account" option on the next dialog box. The SYSTEM account will only be able to access resources on this computer.
15043 Please specify a user with administrative rights or select the SYSTEM account. When specifying local (non-domain) accounts, be sure to add ".\" in front of the user name.
15044 To continue with Setup, press the NEXT button
15045 Use the &SYSTEM account
15046 Use this &CUSTOM account
15047 &User Name:
15048 &Password:
15049 &Confirm Password:
15050 Setup could not find a file on the specified path or disk.
15051 Please check that the proper disk is inserted or specify a new path.
15052 OK
15053 Yes, I want to restart my computer now.
15054 No, I will restart my computer later.
15055 Remove any disks from their drives, and then click Finish to complete setup.
15056 In order to run VirusScan, you need to reboot.\nThe system may be unstable if VirusScan is started without rebooting the system.
15057 Setup notification
15058 Invalid Password for user
15059 ....Alert Manager....
15060 Network Associates Task Manager
15070 Network Associates VirusScan NT
15071 Alert Manager
15072 Read Me 1st
15073 Resellers
15074 UnInstall VirusScan NT
15075 VirusScan
15076 VirusScan Console
15078 What's New in VirusScan NT
17000 Setup
17001 Setup is preparing the InstallShield wizard which will guide you through the rest of the Setup process. Please wait.
17002 McAfee VirusScan
17003 (Licensed-Alpha)
17004 It is strongly recommended that you exit all Windows programs before running this Setup program.
17005 Click Cancel to quit Setup and then close any programs you have running. Click Next to continue with the Setup program.
17006 WARNING: This program is protected by copyright law and international treaties.
17007 Unauthorized reproduction or distribution of this program, or any portion of it, may result in severe civil and criminal penalties, and violators will be prosecuted to the maximum extent possible under law.
17008 &Next >
17009 Cancel
17010 Exit Setup
17011 Setup is not complete. If you quit the Setup program now, the program will not be installed.
17012 You may run the Setup program at a later time to complete the installation.
17013 To continue installing the program, click Resume. To quit the Setup program, click Exit Setup.
17014 &Resume
17015 E&xit Setup
17016 Please read the following License Agreement. Press the PAGE DOWN key to see the rest of the agreement.
17017 < &Back
17018 &Yes
17019 &No
17020 Setup Type
17021 Click the type of Setup you prefer, then click Next.
17022 Typical
17023 Program will be installed with the most common options. Recommended for most users.
17024 Compact
17025 You may choose the options you want to install. Recommended for advanced users.
17026 Destination Directory
17027 B&rowse ...
17028 Current Settings:
17029 Welcome to the McAfee Emergency Disk Creation Wizard.\nThis wizard will allow you to create a diskette that you can boot your system from in the event an unknown virus infects system files on your hard disk.
17030 Click "Next" to continue or "Cancel" to quit.
17031 Custom
17033 Insert a blank high density diskette in drive A. Select "Next" to optionally format* the diskette and to copy the files to the diskette.
17034 *Select "Don't format" if you wish to use a disk that is already bootable.
17035 &Don't format
17040 There is not enough disk space to copy McAfee Emergency disk files. Please delete some files and try again.
17041 Please wait while the McAfee VirusScan scan diskette for viruses.
17042 Please wait while the necessary files are being copied to the diskette...
17046 An Emergency disk has been created.
17047 Label it-"McAfee Emergency Boot Disk".
17048 Write protect it. To write protect the disk, open the write-protect notch in the upper corner of the disk.
17049 To test your Emergency Disk, restart your computer with the disk in the A: drive. When you get to the A: prompt, type CL and press the ENTER key to access your hard drive. If you can access your hard drive in this test your Emergency Disk is functioning properly.
17050 Store the disk in a safe place
17051 Configuration:
17052 Setup will add program icons to the Program Folder listed below. You may type a new folder name, or select one from the Existing Folders list. Click Next to continue.
17053 Select Program Folder
17054 File Transfer Complete
17055 Copying
17056 files...
17057 Select Components
17058 Select the components you want to install, clear the components you do not want to install.
17060 Uninstalling previous version ....
17061 Select the components your want to install, clear the components you do not want to install.
17062 &Components
17063 Description
17064 Space Required:
17065 Space Available:
17066 K
17068 &Program Folders:
17069 E&xisting Folders:
17070 Yes, I want to restart my computer now.
17071 No, I will restart my computer later.
17072 Remove any disks from their drives, and then click Finish to complete setup.
17073 Found Previous Version
17074 Setup has found
17075 installed on your computer. This version is older than the version you are about to install. Unless the older version has specific settings you wish to preserve, you should remove it.
17076 Click REMOVE to completely uninstall the previous version and delete its settings.
17077 &Remove
17078 Uninstalling WebScanX and associated progam groups.
17079 Finish
17080 Click PRESERVE to retain the settings from the previous version, but delete all of its program files.
17081 Click EXIT SETUP to quit Setup and leave the previous version untouched.
17090 Please be patient while Network Associates uninstalls McAfee VirusScan.
17091 Please wait while cleaning Up ...
17092 Removing
17093 Password mismatch
17094 Dr Solomon's Anti-Virus Toolkit uninstall failed!
17095 Setup attempted to uninstall Dr Solomon's Anti-Virus Toolkit but a problem occurred during this process. Please uninstall this product manually before continuing with this installation.
17096 Severe Error!
17097 McAfee
17098 Install Configuration Not Available
17099 Information
17100 The password you entered does not match the password you confirmed with. Please correct to make sure these match before proceeding.
17101 Setting Default Root Failed.\nUninstall will not continue.
17102 Uninstallation Path Not found, uninstall will not continue.
17103 ERROR: UNINSTALL KEY NOT OBTAINED\nDue to the severity of this error, installion will stop.
17104 ERROR:
17105 An error was encountered while uninstalling your\nPlus!98 version of Virus Scan. Please uninstall\nmanually before this installation can continue.
17106 Setup was unable to detect the previous install options.\nTypical install settings will be selected.
17107 Error Has Occurred while setting General Scan32 Registries
17108 Error Has Occurred while setting AVCONSOL Registries
17109 Error Has Occurred while setting Exchange Registries
17110 Error Has Occurred while setting Scan32/vshield Registries
17111 The Plus!98 version of Virus Scan has been\ndetected. This needs to be uninstalled before\ncontinuing. Would You Like Network Associates to\nautomatically uninstall this now?
17112 Dr Solomon's Anti-Virus Toolkit Found!
17113 has detected a version of Dr Solomon's Anti-Virus Toolkit installed. In order to continue installation of
17114 , you have to uninstall this product.\n\n
17115 can REMOVE Dr Solomon's Anti-Virus Toolkit for you, or you may chose to Exit Setup, and remove it yourself.
17116 &Remove
17117 &Exit Setup
17118 none
17119 Display Properties
17120 McAfee Emergency Disk Creation Utility
17121 User Registration Information
17122 WinHelp Internet Access
17123 Ecare ECEngine -- Welcome to McAfee SecureCast Online!
17124 Please wait, uninstalling
19000 Setup
19001 NetShield NT Setup is preparing the InstallShield wizard which will guide you through the rest of the Setup process. Please wait.
19002 McAfee NetShield
19003 (Evaluation-Beta) - Setup
19004 It is strongly recommended that you exit all Windows programs before running this Setup program.
19005 Click Cancel to quit Setup and then close any programs you have running. Click Next to continue with the Setup program.
19006 WARNING: This program is protected by copyright law and international treaties.
19007 Unauthorized reproduction or distribution of this program, or any portion of it, may result in severe civil and criminal penalties, and violators will be prosecuted to the maximum extent possible under law.
19010 &Next >
19011 Cancel
19015 Exit Setup
19016 Setup is not complete. If you quit the Setup program now, the program will not be installed.
19017 You may run the Setup program at a later time to complete the installation.
19018 To continue installing the program, click Resume. To quit the Setup program, click Exit Setup.
19019 &Resume
19020 E&xit Setup
19026 Please read the following License Agreement. Press the PAGE DOWN key to see the rest of the agreement.
19027 < &Back
19028 &Yes
19029 &No
19040 Please select the type of installation for this product.
19041 Choose this option to install this product to this computer.
19042 Choose this option to install this product to one or more remote computers on your network. Only valid components will be installed will be installed on these computers. For a list of valid components, please consult the whatsnew.txt file.
19050 Setup Type
19051 Click the type of Setup you prefer, then click Next.
19052 Typical
19053 Program will be installed with the most common options. Recommended for most users.
19054 Compact
19055 Program will be installed with minimum required options.
19056 Custom
19057 You may choose the options you want to install. Recommended for advanced users.
19058 Destination Directory
19059 B&rowse...
19060 Program will be installed with minimum required options
19061 Program will be installed with minimum required options
19070 The directory:
19071 does not exist. Do you want the directory to be created?
19080 In order for this product to access network resources, the services must be started with an administrative user account that you specify.
19081 Examples where this product can use network resources include forwarding alerts to other computers, and performing automated updates of virus definition files.
19082 If you do not want to specify a custom account during installation, select the "Use the SYSTEM account" option on the next dialog box. The SYSTEM account will only be able to access resources on this computer.
19083 Please specify a user with administrative rights or select the SYSTEM account. When specifying local (non-domain)accounts, be sure to add ".\" in front of the user name.
19084 Use the &SYSTEM account
19085 Use this &CUSTOM account
19086 &User Name:
19087 &Password:
19088 &Confirm Password:
19089 To continue with Setup, press the NEXT button.
19096 Current Settings:
19100 In order to run McAfee NetShield you need to reboot.
19101 The system may be unstable if McAfee NetShield is started without rebooting the system.
19110 Yes, I want to restart my computer now.
19111 No, I will restart my computer later.
19112 Remove any disks from their drives, and then click Finish to complete setup.
19120 NetShield Statistics
19121 The McAfee Task Manager service is not running on the local server. Would you like to start services now?
19122 Network Associates McAfee NetShield
19123 Alert Manager
19124 McAfee NetShield....
19125 Resellers
19126 Uninstall
19127 VirusScan
19130 Setup has found previous components of this product. Setup can uninstall them for you, over write your previous settings, or install over them and preserve the settings you had.
19131 Preserve
19132 This option preserves your settings, allowing you to upgrade, while retaining your configuration.
19133 Overwrite
19134 This option overwrites whatever settings you had, without uninstall the product.
19135 Uninstall
19136 This option uninstalls the current version before installing this one. All current settings will be lost.
19140 Setup has determined that there are some drivers which will conflict with the installation of this product. Please uninstall and reboot your machine in order for Setup to install
19141 properly. Do you want Setup to reboot your machine for you ?
19142 Conflicting drivers
19150 Printer
19151 SNMP
19152 DMI
19153 Program
19154 Logging
19155 Sound
19156 Summary
19157 Forward
19158 Network Message
19159 E-Mail
19160 Pager
19170 Enable or disable SNMP traps for this system.
19171 &Enable SNMP traps
19172 &Configure SNMP...
19176 Enable or disable using DMI for alerts on this system.
19177 &Enable DMI alerts
19180 Displays a list of alert methods defined for this system.
19186 Display a list of printers which will print alert work orders.
19187 Type
19188 Recipient
19189 &Add...
19190 Enable or disable launching a program when alerts are generated on this system.
19191 E&xcute program
19196 Displays a list of systems which receive alerts in their NT Event Log from this system.
19197 &add....
19198 &Remove
19199 &Properties....
19206 Enable or disable audible alerts on this system.
19207 &Enable audible alerts
19208 Sound file(may be left blank; in this case the default system "exclamation" sound will be used);
19210 Displays a list of systems to which alerts are forwarded.
19216 Displays a list of computers which will receive network broadcasts. Usernames can also be defined in this field.
19220 Displays a list of SMTP e-mail recipients to receive alert notification.
19226 Displays a list of pagers which will be paged with alerts.
19240 Specify the system which will receive network messages.
19241 &Computer:
19242 &Test
19246 Browse for Computer
19250 Alert Manager Test
19251 Test sent to AlertManager. If you do not receive the alert, check the event log.
19256 Logging Properties
19257 Specify the system which will receive the alerts in their NT Event Log from this system.
19260 AlertManager Configuration Confirmation
19261 This device will be removed from the list of alert recipients. Do you want to continue?
19266 Forward Properties
19267 Specify the system to which alerts will be forwarded.
19270 Specify the pager which will be notified.
19271 T&ype:
19272 &Number:
19273 &ID:
19274 Pa&rity:
19275 Pass&word:
19276 Use &Alert Message
19277 Use &Custom Message
19278 &Modem Settings...
19290 Modem
19291 Specify modem settings
19292 &Modem:
19293 &Port:
19294 &Baud:
19295 Dial P&rifix
19296 Dial &Suffix
19297 Speaker &Off
19298 &Dial
19299 Tone
19300 Pulse
19310 Alert Configuration Notification
19311 The page ID must be filled in.
19312 Recipient must be filled in.
19316 Unable to start Virus Scan NT. System needs to be restarted before using this product.
19320 &File
19321 &Help
19322 Where & What
19323 Scan &in
19324 &All files
19325 Program &files only
19326 File &Types...
19327 &Compressed files
19328 S&kip boot record scanning
19329 &Scan Now
19330 Ne&w Scan
19331 Actions
19332 When &virus is found
19333 Description
19334 Selecting this option instruct Scan to continue
19335 scanning after detecting a virus.
19336 Reports
19337 &Notify Alert Manager
19338 &Log to file
19339 L&imit size of log file to
19340 Kilobytes
19341 Name
19342 In Folder
19343 Infected by
19344 Status
19345 Scanned:
19350 Select Activity Log File
19351 Look &in File
19352 &name
19353 Files of &type
19360 Notes server needs to be shut down before uninstalling GroupShield for Notes. Continue?
19366 Proceed with 'McAfee NetShield (Evaluation-Beta) UnInstallation?
19370 Network Associates UnInstaller will remove the software 'McAfee NetShield v4.0.0 (Evaluation-Beta)' that is installed on your machine. Please wait while the uninstall completes....
19371 Sending messages
19372 Removing program items
19373 Removing program groups
19374 Removing registry values
19375 Removing INI entries
19376 Restarting / removing services
19377 Removing program files
19378 Removing directories
19379 Removing components
19390 Stopping
19391 Alert Manager Config...
19392 Network Associates Task Manager
19393 Configuration settings:
19394 Using Local System account.
19395 Using System Account
19396 Installing to these servers:
19397 files to the computers listed below.\n\n
19398 Start Alert Manager automatically.
19399 Start Alert Manager after install.
19420 Select Components
19421 Select the components you want to install, clear the components you do not want to install.
19422 Virus protection for your system.
19423 Advanced management of user alerts from scanning tasks.
19424 Previous Installation Found
19425 Setup will add program icons to the Program Folder listed below. You may type a new folder name, or select one from the Existing Folders list. Click Next to continue.
19426 Select Program Folder
19427 Uninstalling previous version ....
19428 Removing
19429 Please select which options you would like enabled for the Alert Manager.
19430 Automatically start the Alert Manager service on startup
19431 Start the Alert Manager upon completion of installation
19432 Warning
19433 In order to run
19434 you need to reboot.\nThe system may be unstable if
19435 is started without rebooting the system.
19436 Setup Notification
19437 Invalid Password for user
19438 Invalid Path Selected
19439 The drive you have selected is not on a local fixed drive.\n Please select a valid local path.
19440 Setting Default Root Failed.\nUninstall will not continue.
19441 Uninstallation Path Not Found, uninstall will not continue.
19442 ERROR: UNINSTALL KEY NOT OBTAINED\nDue to the severity of this error, installion will stop.
19443 ERROR:
19444 Warning
19445 Setup has determined that you do not have the latest Service Pack installed.\nIt is recommended that you install it before running
19446 Closing VirusScan...
19447 Closing Console.
19448 Closing AutoUpdate.
19449 Closing Shield Statistics...
19450 Closing NetShield Antivirus Console...
19451 Closing McAfee Antivirus Console...
19452 Stopping Task Manager...
19460 Confirm Uninstall
19461 You have selected to remove
19462 Are you sure you wish to uninstall
19463 Closing Regedit.
19464 K
19465 Preparing
19466 for installation...
19467 Could not prepare machine for remote installation.
19468 Please check permissions on that machine..
19469 Copying program files to
19470 Migrating data to
19471 Configuring
19472 Installation on
19473 successful.
19474 Selecting components to install to
19475 Checking for available disk space
19476 Selecting configuration for
19477 Failed during "
19478 Installed successfully.
19479 Cleaning up
19480 Cleaning Up Multi Server Install
19481 Creating program folders on
19490 Unable to Start SNMP Service
19491 Stopping SNMP ...
19492 Starting SNMP Service ...
19493 Could not prepare local machine for remote installation to this machine.
21000 Setup
21001 Set up is preparing the InstallShield wizard which will guide you through the rest of the process. Please wait.
21010 NetShield
21020 It is strongly recommended that you exit all Windows programs before running this Setup program.
21021 Click Cancel to quit Setup and then close any programs you have running. Click Next to continue with the Setup program.
21022 WARNING: This program is protected by copyright law and international treaties.
21023 Unauthorized reproduction or distribution of this program, or any portion of it, may result in severe civil and criminal penalties, and violators will be prosecuted to the maximum extent possible under law.
21024 &Next >
21025 Cancel
21040 Exit Setup
21041 Setup is not complete. If you quit the Setup program now, the program will not be installed.
21042 You may run the Setup program at a later time to complete the installation.
21043 To continue installing the program, click Resume. To quit the Setup program, click Exit Setup.
21044 &Resume
21045 E&xit Setup
21060 Please read the following License Agreement. Press the PAGE DOWN key to see the rest of the agreement.
21061 < &Back
21062 &Yes
21063 &No
21070 Setup Type
21071 Click the type of Setup you prefer, then click Next.
21072 Typical
21073 Program will be installed with the most common options. Recommended for most users.
21074 Compact
21075 Custom
21076 You may choose the options you want to install. Recommended for advanced users.
21080 Netware
21081 Destination Directory
21082 B&rowse...
21090 Specify the server(s) you wish to install to.
21091 New Server
21092 A&dd...
21093 Bro&wse...
21094 Selected Server(s)
21095 &Edit...
21096 &Remove
21110 Add server
21111 You must enter a Server Name.
21120 Select a Computer on your Network
21121 &Computer
21122 &Help
21123 &Select Computer:
21130 Remove server
21131 There are no servers selected.
21140 &User Name
21141 &Password
21142 Install to
21143 &Directory:
21144 &NDS Context for NetShield object:
21145 Free Space:
21160 Shares:
21161 Directory &name:
21162 &Open
21170 You did not select a volume. Please open a volume, then a path.
21180 You do not have write access to this volume. Please select another volume.
21190 Setup has found previous components of this product. Setup can uninstall them for you, over write your previous settings, or install over them and preserve the settings you had.
21191 Preserve
21192 This option preserves your settings, allowing you to upgrade, while retaining your configuration.
21193 Uninstall
21194 This option uninstalls the current version before installing this one. All current settings will be lost.
21210 Current Settings:
21220 Setup has finished copying files to your computer.
21221 Your system is now ready to use the newly installed components.
21222 Click Finish to complete Setup.
21223 Finish
21330 Uninstall previous version...
21340 Configuring System...
21350 Are you sure you want to remove this server?
21360 Uninstalling Console...
21361 Uninstalling previous version...
21362 Uninstalling Server(s) ...
21363 Configuring System...
21364 Creating Program Folder and Icons...
21365 Preparing file transfer...
21366 Migrating Data...
21367 Installation complete.
21368 Dialog failed
21369 K
21370 Stopping Task Manager...
21371 Starting Task Manager...
21372 Unsupported Operating System
21373 This version of
21374 is not designed to operate on the version of Windows you are currently running. This version of
21375 is designed for Microsoft Windows NT Workstation 3.51 or later. Please consult the products' documentation for more information.
21376 Select Program Folder
21377 Setup will add program icons to the Program Folder listed below. You may type a new folder name, or select one from the Existing Folders list. Click Next to continue.
21378 Changes Made
21379 To store configuration information, Setup has made modifications to the file(s) listed below. Setup has also made a backup for any file which was updated.
21380 The modified file(s) were:
21381 The backup(s) are:
21382 Please select which options you would like enabled for the Alert Manager.
21384 Installation Complete
21385 Setup has finished copying files to your computer.\n\nBefore you can take advantage of the new components, you must restart your computer.
21386 Setup has finished copying files to your computer.\n\nYour system is now ready to use the newly installed components.
21387 Installing to these servers:
21388 Configuration settings:
21389 Virus protection for servers.
23000 Dr Solomon's VirusScan On-Demand Scanner
23001 Dr Solomon's VirusScan Scheduler
23002 Dr Solomon's VirusScan Consol
23003 Dr Solomon's VShield On-Access Scanner
23004 Dr Solomon's ScreenScan
23005 Dr Solomon's VirusScan
23006 Dr Solomon's VirusScan Central
23007 Dr Solomon's VirusScan Central cannot be installed without Dr Solomon's VirusScan Scheduler and\nDr Solomon's VirusScan On-Demand Scanner.\n\nDo you wish to install them all (yes) or none (no)?
23008 The Dr Solomon's VirusScan Scheduler cannot be installed without the Dr Solomon's VirusScan On-Demand Scanner.\n\nDo you wish to install both (yes) or neither (no)?
23010 The cc:Mail Scan cannot be installed without Dr Solomon's VShield.\n\nDo you wish to install both (yes) or neither (no) ?
