3 Unable to load all registered Anvil Studio Accessory pages.
4 Accessory '%1' does not contain a valid license.%cIf you want to use this accessory, please re-run its setup program.
5 Unable to load the Anvil Studio Accessory '%1'.%cIf you want to use this accessory, please re-run its setup program.
6 Unable to initialize Anvil Studio Accessory '%1'.
7 Anvil Studio has not been properly setup on your computer.%cPlease run the Anvil Studio setup program.
8 Invalid name for new synthesizer: %1.
9 Unable to enable synthesizer: %1.
10 Cannot remove a synthesizer while any track in current song is assigned to a synthesizer.
11 This synthesizer cannot listen to this channel.
12 Error: synthesizer "%1" is assigned to play track %2 on MIDI channel %3.%cIt needs exclusive access to that channel.
13 Click here to indicate what synthesizer patch, or instrument, should be used to play this track.
14 Your computer can't record at the desired Audio Quality.%cPlease change the Audio Quality field and try again.
15 Anvil Studio Internal Error: %1.
16 You must first set this track's Synthesizer.
17 This field can't be changed for Audio tracks.
18 This synthesizer can't listen to this channel.%cChange the Channel or Synthesizer property first.
19 You must first set this track's Synthesizer and Channel properties.
20 Too create multiple audio tracks, you need the%cAnvil Studio Multi-Audio accessory.%cSee the Catalog page for details.
21 Enter part of the instrument name, or%ccomments you have entered for it:
22 This button copies the selected patch to the selected slot in the active bank.%cYou must first click on the slot in the active bank where you want the patch to be copied.
23 Unable to create new patches or banks for this syntesizer%cTo do this, you need a Anvil Studio Patch Library accessory.%cSee the Catalog page for details.%cDo you want to turn to that page now?
24 This audio file was recorded with %1 quality%cIt is not compatible with this song's current Audio Quality setting of %2.
25 You must first assign a synthesizer to this track.
26 This will cause all notes on this track to be erased.%cAre you sure that you want to erase this track?
27 This synthesizer doesn't have a Rhythm patch loaded in its active bank.
28 This track already contains MIDI events for multiple channels.%cTo be used as a rhythm track, it can only have one channel.
29 Now, your song has more than one track.
30 Many pages, like the Compose page, only affect the active track.
31 The active track is the one whose name is highlighted on the Record page.
32 To make another track active, click on that track's name on the Record page.
33 Before you can record or play audio, you need you select Audio Ports.%cDo you want to do that now?
34 This system has no audio output device.
35 This system has no audio recording device.
36 You cannot change audio quality while a song with recorded audio is loaded.
37 Note: Track %1 contains distortion because volume was set too high when it was recorded.
38 The Audio file for track %1, '%2' was not found.%cThis track will be disabled.
39 Unable to play Track %1%c%2%cTrack is now disabled.
40 To use this page, you must:%c o put an Audio CD into the computer's CD-Rom drive,%c o wait for a few seconds for the computer to recognize it.
41 Start time must be less than end time.
42 Invalid time. Value must be between 0 and 1200.
44 Channel must be ----- or a number from 1 to 16.
45 Too create more samples, you need the Anvil Studio Multi-Audio accessory.%cSee the Catalog page for details.%cDo you want to turn to that page now?
46 Press the OK button to begin recording.
47 Another application is using the computer's CD player.%cYou need to quit that application before you can use this page.
48 Your computer has no Compact Disk player.
49 Unable to load the sampled audio file '%1' that is referenced by this song.%c%2
50 Note: If saved, this file will be converted to a newer format.
51 This track already contains MIDI events for multiple channels.%cYou can only record to tracks that have one channel.
52 This song's Audio Quality property is higher than can be played by your computer.%cAudio tracks will be disabled.
53 The requested Audio Out Port is in use.%cIt might be in use by another application.%cSome sound cards do not allow their MIDI port and Audio port to be opened at the same time.%cYou could go to the Synths page to try another Audio Out Port.%cYou could also go to the Record page and disable all Audio tracks and Sampled Rhythm tracks and then try playing this song again.
54 Warning: You must first enable a Midi Input Port via the Contents/Synthesizers page.
55 You need to select a track first.
56 Your computer does not have the sound device necessary to start the Metronome.
57 Warning: no MIDI sounds will occur until you enable a Midi Out Port via the Contents/Synthesizers page.
58 Before you can use the Rhythm Tool, you need to enable one or more synthesizers that have Drum patches.
59 Accessory '%1' needs a newer version of Anvil Studio (%2 or later).%cBefore you can use this accessory, you need to install a new version of Anvil Studio.
60 The version of accessory '%1' you are using is not compatible with your new version of Anvil Studio.%cTo use this accessory, you need to either%cuse your old version of Anvil Studio, or install a new version of this accessory.
61 This is to notify you that a new version of accessory '%1' is available for download from Anvil Studio's Web site.%cSee the Catalog page for details.
62 This song contains no tracks.
63 Error: To set a program for synthesizer "%1"%cit needs to be the only synthesizer listening to this channel.%c"%2"is also listening to MIDI channel %3.
64 Note: One of the tracks contains multiple channels, so no program can be set for that track.
65 Error: First you need to set one or more tracks to this channel.
66 Make sure MIDI cable connects Synthesizer's MIDI Output Port to computer's MIDI Input Port.
67 When song was saved, synth %1's active bank was %2.%cNow it is %3.
68 Song refers to disabled synthesizer: "%1".%cTo enable it, use the Synthesizers Tab.%cIf the file is saved, synthesizer settings will be lost.
69 Unable to output to MIDI Port %1.%c%2.
70 You cannot do this while a song is loaded. Do you want to unload the current song?
71 This system has no MIDI Output Devices. It will be unable to play any MIDI music.
72 Before you can do this, you first need to give the song file a name.
73 You need to edit the Rhythm Tool's properties and set its Synthesizer property.
74 Error: Unable to load patch library for synthesizer "%1" from file %2.
75 Unable to play any patches. No channels on this synthesizer are enabled. To enable one, in the MIDI Channel Programs box, set any channel's Program to anything other than <none>.
76 Do you want to save changes to %1
77 Unable to load %1.
78 Your computer has no MIDI Output Controller. Do you want to exit?
79 Before you can do this, you need to enable one or more synthesizers in the Contents/Synthesizers Tab.%cDo you want to do that now?
80 Invalid value.
81 Invalid time.
82 Tempo cannot be faster than 5 beats per second (300 per minute).
83 You need to disable (uncheck) all synthesizers before you can change MIDI ports.
84 Anvil Studio requires Internet Explorer 3.0 or later, which can be downloaded from www.microsoft.com\ie
85 This track's Audio Quality property is higher than can be played by your computer.
86 Error: MIDI port needs to be attached.
87 This song contains no enabled tracks with Audio.
88 Error: Number of times to play measures must be between 1 and 100.
89 You must first select the synthesizer that you want to play the rhythm track.%cAfter pressing the Ok button, try pressing the Down Arrow key until you see the synthesizer you want.%cThen press the Enter key.
90 Error: tempo must be between 1 and 200.
91 Recording contains distortion. Maybe volume is set too high.
92 Error: selection is too large to invert.
93 Stack Overflow. Either your program contains a cycle, or it cannot keep up with MIDI Inputs
94 You need to add a Keyboard Tool to your program if you want to process Keyboard events.
95 You need to press the RUN button before this page will do anything.
96 You must press the Stop button if you want to change this program.
97 You tried to connect to a tool that cannot accept input.
