100 Click this button to install |1 software to the specified destination directory.
101 Click this button to install |1 software to your computer.
200 Welcome to the |1 installation program.
300 Please enter the drive or path containing the |1 source files.
301 Enter or select a destination directory.
302 The destination directory:
303 does not exist. Do you want the directory to be created?
304 Change Directory
305 Install From
400 An error occurred while calculating required disk space.
401 Cannot read drive
402 Please verify the drive door is closed and that the disk is formatted and free of errors.
403 Could not open the file named:
404 Could not read from the file named:
405 Could not write to the file named:
406 Please verify that the destination drive has enough disk space.
407 Could not create directory:
411 Are you sure you want to Exit?
412 |1 Setup was interrupted before your new software was fully installed.
413 You can run |1 Setup in its entirety at a later time to complete the installation.
414 Setup is not yet complete.
415 If you quit now, this product will not be correctly installed.
416 Quit the setup of this product?
417 |1 Setup was completed successfully.
418 |1 Setup was not completed successfully.
419 Error determining allocation unit for drive
420 is in the Setup source files directory. Please type a different directory.
421 Could not create the file named:
422 Please verify that destination drive is not write protected.
423 Please insert the disk labeled:
424 'Disk
425 ' into drive
426 Section:
427 Invalid line in setup information file!
428 The specified directory:
429 is invalid, incomplete, or write protected. Please type a full path with drive letter; for example 'C:\APPS'.
430 The directory doesn't exist!
431 Invalid Directory Name
432 The destination file is write protected.
433 The destination file in in-use. Please ensure that all other applications are closed.
434 Out of space on destination drive
435 An access violation occurred while copying the file.
436 A sharing violation occurred while copying the file.
437 Out of memory trying to copy the file.
438 Cannot create temporary file.
439 Cannot delete existing destination file.
440 Cannot rename temporary file.
441 Cannot read source file.
442 Cannot read destination file attributes.
443 Internal copy error.
444 The file could not be installed.
445 Please check the connection to drive
446 If you ignore a copy error, the file will not be copied. The application may not function properly as a result. Do you want to ignore the error?
447 The drive specified by the 'TMP' or 'TEMP' environment variable is not ready.
448 The line 'device=vshare.386' may need to be added to the [386Enh] section of your SYSTEM.INI file to ensure proper operation of your new software.
449 Cannot read network path '|1'.
450 Please verify that this path is correct and that you have permission to access it.
451 Application removal logfile '|1' not found. Unable to continue.
452 Invalid command-line parameters. Unable to continue.
453 Application removal executable '|1' not found. Unable to continue.
454 Remove |1
455 Error registering the application removal executable with Windows
456 Error creating a Program Manager icon for the application removal utility
457 Setup is about to replace a pre-existing file(s). This may cause loss of data for an existing application.
458 Installing over an existing installation without first removing it may damage that installation or cause future attempts to remove the installation to fail.
459 Cancel setup?
460 Please run setup again and select a new location for application files.
461 Are you sure you want to continue?
462 An error occurred trying to update the Windows registration database.
463 Microsoft Shared\
465 An error occurred trying to create the program group '|1'
466 An error occurred trying to create a program icon for '|1'
467 An error occurred trying to copy '|1' to the application directory
468 The file '|1' could not be registered because it was not found.
469 Windows was unable to run the program '|1'. Your system may be low on memory, or the program may not have been found.
470 Error: 'SETUP.LST' contains no information on how to register the remote component '|1'. This information should have been found in a '|2' key in SETUP.LST
471 Program Manager
472 Unexpected error creating '|1':
473 Cannot copy file, Destination Path is too long.
474 Cannot create Uninstall Icon, Destination Path is too long.
475 No icon was specified in SETUP.LST for |1. Do you want to continue without creating this icon? Click Yes to continue. Click No to Exit Setup.
500 Setup was unable to determine a valid default destination directory. You will need to specify a destination directory.
501 Setup is checking for necessary disk space...
502 Setup is creating program icons...
503 Setup is updating your system...
504 The name of the application's executable file could not be determined.
505 |1 Setup
506 The SETUP.LST file is corrupt or could not be found.
507 An unexpected setup error has occurred!
508 Setup customization error: An icon needs to be created for |1, but no folder or Program Manager group was created for this purpose.
509 Setup error: Missing 'CommitAction()' or 'AbortAction()'.
510 Remote Automation Management
511 Automation Manager
512 RemAuto Connection Manager
513 Warning: It is recommended that you install Service Pack 2 for Windows NT 4.0. This application may not work properly without it.
530 MANUAL.DOC
531 Manual
532 ORDER.DOC
533 Order form
534
535
600 Error determining disk space free for drive
701 Directory:
702 &Change Directory
703 E&xit Setup
704 Begin the installation by clicking the button below.
705 Cancel
706 Destination File:
707 &Install Now
708 &Change Drive
709 Drive
710 Space Available
711 Space Needed
712 Space Required
713 There is not enough free disk space on one or more drives.
714 OK
715 Dri&ves:
716 &Directories:
717 &Path:
718 Setup cannot install system files or update shared files if they are in use. Before proceeding, we recommend that you close any applications you may be running.
719 Click here to begin setup
800 Converter Pro - Choose Program Group
801 Setup will add items to the group shown in the Program Group box. You can enter a new group name or select one from the Existing Groups list.
802 &Program Group:
803 E&xisting Groups:
804 &Continue
805 A program group name must be less than |1 characters long and cannot contain any of the following characters: |2
806 "][,)(
900 Network &Address
901 Network &Protocol
902 &Continue
903 E&xit Setup
904 Remote ActiveX Component Configuration
905 Please fill in the requested configuration information about the following remote component:
906 The protocol sequence |1 (|2) is not supported or available on this machine
907 The protocol sequence '|1' ('|2') is invalid
908 An unexpected error occurred while determining the protocol sequences available on this machine
909 Setup error: An error occurred trying to read protocols from the SETUP.LST file.
910 None of the protocols needed by this application appear to be available or installed on this machine.
911 In order to run Setup successfully, you will need to first install one of the following network protocol sequences:
912 This application will not be able to access the remote component '|1' until the protocol '|2' is installed.
950 MS Sans Serif
951 8
952 False
953 Arial
954 System
2000 File currently on disk was already up to date
2001 File was not found or was an older version -- new file copied
2002 ERROR:
2003 WARNING:
2004 DURING THIS ACTION:
2005 Error writing to logfile '|1'
2006 Setup fatal error: Unable to generate installation log file.
2007 PLEASE DO NOT MODIFY OR DELETE THIS FILE!
2008 This file contains information about the installation of an application.
2009 It will be used to automatically remove all application components from your computer if you choose to do so.
2010 There was an unexpected problem trying to create or write to the logfile '|1'. Error number is |2.
2011 Out of memory trying to create or write to the logfile '|1'
2012 User Responded with '|1'
2013 Error attempting to run the application removal program to remove temporary installation files.
2014 Setup will now start the application removal utility to remove temporary installation files.
2100 OK
2101 Cancel
2102 Abort
2103 Retry
2104 Ignore
2105 Yes
2106 No
2107 (Unknown)
2200 An error occurred while registering the file '|1'
2201 Unexpected error while registering file '|1'
2202 Could not initialize OLE in order to register file '|1'
2203 LoadLibrary() failed while registering file '|1'
2204 No entrypoint for DllRegisterServer() was found in '|1'
2205 DllRegisterServer() in the file '|1' returned failure
2206 One possible cause for this error is that RPC may not be installed on your computer.
2207 If this is the problem, then you will need to exit Setup, install RPC, and restart Setup.
2208 The file '|1' was not copied because it is intended for use under Windows NT 3.51 only. It is not needed under Windows 95 or NT 4.0.
2209 \/:*?"<>|
2210 DISK
2211 Cannot find the source file '|1' to install.
2212 Could not register the TLB file '|1'.
2213 The file '|1' was not copied because it is intended for use under Windows 95 only. It is not needed under Windows NT 3.51 or 4.0.
2214 The file '|1' was not copied because it is intended for use under Windows 95 and NT 4.x only. It is not needed under Windows NT 3.51.
2215 The file '|1' was not copied because it is intended for use under Windows NT 3.51 only. It is not needed under Windows 95 or NT 4.x.
3101 Klicken Sie auf diesen Button, um Converter Pro im unten angegebenen Verzeichnis zu installieren.
3200 Willkommen zur Installation von Converter Pro
3301 Geben Sie ein Verzeichnis ein oder wΣhlen Sie eines aus.
3302 Das Verzeichnis:
3303 existiert nicht. Soll das Verzeichnis kreiert werden?
3304 Verzeichnis Σndern
3411 Setup beenden?
3417 Converter Pro wurde erfolgreich installiert.
3423 Bitte laden Sie
3424 Diskette
3425 in Laufwerk
3457 Setup hat eine existierende Installation von Converter Pro vorgefunden. Es wird empfohlen, die existierende Installation zuerst zu entfernen (Systemsteuerung/Software). Die bestehenden Buchhaltungsdateien gehen dabei nicht verloren.
3458 Wenn Sie ⁿber die existierende Installation von Converter Pro installieren, dann k÷nnen bei einer spΣteren Deinstallation Schwierigkeiten auftreten.
3459 Setup beenden?
3461 Sind Sie sicher, dass Sie weiterfahren wollen?
3501 Setup prⁿft ob genⁿgend Platz auf der Festplatte vorhanden ist...
3502 Setup kreiert Programm-Icons...
3503 Setup passt Ihr System an...
3530 HANDBUCH.DOC
3531 Handbuch
3532 BESTELL.DOC
3533 Bestell- Formular
3534 BESTELL.HLP
3535 Bestell-Hilfe
3701 Verzeichnis:
3702 Verzeichnis Σndern
3703 Abbrechen
3704 Klicken Sie auf das untenstehende Bild, um mit der Installation zu beginnen.
3705 Abbrechen
3706 Zieldatei:
3714 OK
3715 Laufwerk:
3716 Verzeichnis:
3717 Pfad:
3718 Setup kann System- oder gemeinsame Dateien nicht installieren, wenn diese benutzt werden. Es wird deshalb empfohlen, alle laufenden Applikationen zu schliessen, bevor Sie fortfahren.
3800 Converter Pro - WΣhlen Sie die Programmgruppe
3801 Sie k÷nnen einen neuen Programmgruppennamen eingeben oder einen bestehenden aus der Liste auswΣhlen.
3802 &Programmgruppe:
3803 E&xistierende Gruppen:
3804 &Weiter
6101 Cliquez sur ce bouton pour installer Converter Pro dans le rΘpertoire indiquΘ en bas.
6200 Bienvenu chez l'installation de Converter Pro
6301 Entrez un rΘpertoire ou en choisissez un.
6302 Le rΘpertoire:
6303 n'existe pas. Voulez vous qu'il soit crΘΘ?
6304 Changer de rΘpertoire
6411 Terminer Setup?
6417 Converter Pro a ΘtΘ installΘ proprement.
6423 S'il vous plaεt, chargez la
6424 Disquette no.
6425 dans le lecteur
6457 Setup a dΘcouvert une installation existante de Converter Pro. Il est recommandΘ de supprimer l'installation existante avant de procΘder (Menu Contr⌠le/Logiciels). Les fichiers existants de comptabilitΘ seront conservΘs.
6458 Si vous continuez α installer Converter Pro en dessus de l'installation existante, vous aurez des problΦmes si vous deviez dΘcider plus tard de dΘinstaller le logiciel.
6459 Terminer Setup?
6461 Etes vous s√r, que vous voulez continuer avec l'installation?
6501 Setup vΘrifie la place disponible sur le disque dur...
6502 Setup installe des ic⌠nes...
6503 Setup adapte votre systΦme...
6530 MANUEL.DOC
6531 Manuel
6532 ORDRE.DOC
6533 Formulaire commande
6534
6535
6701 RΘpertoire:
6702 Changer de rΘpertoire
6703 Quitter
6704 Cliquez sur l'image en bas pour lancer l'installation.
6705 Quitter
6706 Fichier destination:
6714 OK
6715 Disque:
6716 RΘpertoire:
6717 Chemin d'accΦs:
6718 Setup ne peut pas installer des fichiers de systΦme ou des fichiers communs si ceux lα sont en usage. Avant de continuer, il est donc recommandΘ de fermer toutes les application lancΘes.
6800 Converter Pro - Choisissez un nom de groupe
6801 Vous pouvez entrer un nouveau nom ou en choisir un de la liste.
