# text: "Printing is being terminated because the document has a page containing more data than can be printed."
DITL_-8179.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=4 x2=440 y2=22
# text: "Cancel"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=0 x2=370 y2=50
# text: "Please choose Page Setup and check the paper size and orientation, then try again."
DITL_-8161.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=401 y1=4 x2=461 y2=23
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=5 y1=1 x2=385 y2=18
# text: "The Print Dialog lets you set LaserWriter print options."
# item 2: TEXT (0x88) disabled
# bounds: x1=5 y1=32 x2=471 y2=88
# text: "First, designate the number of copies or which pages of the document you want printed. Then, under Paper Source, designate Paper Cassette or Manual Feed. Click OK to confirm the options."
# item 3: TEXT (0x88) disabled
# bounds: x1=5 y1=91 x2=470 y2=163
# text: "For manual feed, go to the printer and wait for a steady light above the paper icon. Then insert the paper face up. The LaserWriter draws in the paper. Wait for the steady light and insert next sheet of paper, and so forth, until the job is complete."
# item 4: TEXT (0x88) disabled
# bounds: x1=5 y1=166 x2=470 y2=217
# text: "To print envelopes: specify Landscape in Page Setup (File Menu),and insert the envelope face up."
# item 5: TEXT (0x88) disabled
# bounds: x1=5 y1=225 x2=480 y2=241
# text: "See the LaserWriter manual for a complete description of manual feed."
DITL_-8160.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=4 x2=440 y2=22
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=0 x2=370 y2=50
# text: "The value for Reduction is out-of-range; it will be replaced with the closest allowed value."
DITL_-8159.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=4 x2=440 y2=22
# text: "Eject"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=56 x2=440 y2=74
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=80 y1=7 x2=370 y2=88
# text: "The LaserWriter needs a valid Laser Prep file. Please click Eject and insert a disk containing a correct version of the file into the internal drive, or Cancel to terminate printing."
DITL_-8158.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=4 x2=440 y2=22
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=56 x2=440 y2=74
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=80 y1=0 x2=370 y2=80
# text: "The printer has been initialized with an incompatible version of the Laser Prep software. To reinitialize and continue printing, click OK or click Cancel to skip printing."
DITL_-8152.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=4 x2=440 y2=22
# text: "Cancel"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=0 x2=370 y2=50
# text: "The LaserWriter does not support High Resolution printing. Please use \"Draft\"."
DITL_-8150.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=4 x2=440 y2=22
# text: "Cancel"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=0 x2=370 y2=66
# text: "No LaserWriter printer has been specified. Please pull down the ⌃ menu and select a LaserWriter name from the Chooser desk accessory."
DITL_-8149.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=4 x2=440 y2=22
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=0 x2=370 y2=84
# text: "The chosen printer has an incompatible version of the Laser Prep file, and it cannot be changed. You must manually reset the printer or change your version of the LaserWriter software to be compatible."