# text: "LaserWriter IISC software by David C√°sseres, with a lot of help from scott douglass, Bayles Holt, & Nik Bhatt."
DITL_-8183.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=360 y1=4 x2=420 y2=22
# text: "Auto"
# item 1: BUTTON (0x04) enabled
# bounds: x1=473 y1=4 x2=531 y2=22
# text: "Offscreen on purpose"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=354 y2=72
# text: "Please feed the next sheet of paper into the manual feeder when the red light is blinking. Click Auto to change to automatic feed."
# item 3: ICON (0xA0) disabled
# bounds: x1=20 y1=10 x2=52 y2=42
# ICON resource ID: 1
DITL_-8182.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=483 y1=3 x2=543 y2=21
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=25 x2=440 y2=43
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=370 y2=50
# text: "This print job cannot be completed. Please click Cancel, then try again."
DITL_-8181.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=70 x2=444 y2=88
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=43 x2=444 y2=61
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=370 y2=90
# text: "The LaserWriter IISC’s paper cartridge is not installed properly. Please make sure it contains paper; then reinstall it, wait for a steady green light on the printer, and click Continue."
DITL_-8180.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=60 x2=444 y2=78
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=33 x2=444 y2=51
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=370 y2=80
# text: "Error in LaserWriter IISC memory; service may be required, and printed material may show defects."
DITL_-8179.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=70 x2=444 y2=88
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=43 x2=444 y2=61
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=371 y2=91
# text: "No LaserWriter IISC is available. Please check that the printer is properly connected and switched on, make sure its priority number does not conflict with other SCSI devices on your system, then click Continue."
DITL_-8178.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=60 x2=444 y2=78
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=33 x2=444 y2=51
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=370 y2=80
# text: "The LaserWriter IISC is out of paper. Please add paper, wait for a steady green light on the printer, then click Continue."
DITL_-8177.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=60 x2=444 y2=78
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=33 x2=444 y2=51
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=370 y2=80
# text: "The top of the LaserWriter IISC is open. Please close it, wait for a steady green light on the printer, then click Continue."
DITL_-8176.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=60 x2=444 y2=78
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=33 x2=444 y2=51
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=370 y2=80
# text: "The LaserWriter IISC has a paper jam. Please clear it, close the top of the printer, wait for a steady green light on the printer, then click Continue."
DITL_-8175.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=65 x2=444 y2=83
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=38 x2=444 y2=56
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=371 y2=90
# text: "The Macintosh can’t communicate with the LaserWriter IISC. Please check the cables, switch the printer off and then on again, wait for a steady green light on the printer, then click Continue."
DITL_-8174.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=60 x2=444 y2=78
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=33 x2=444 y2=51
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=370 y2=80
# text: "The LaserWriter IISC’s toner cartridge is not installed properly. Please reinstall it, close the top of the printer, wait for a steady green light on the printer, then click Continue."
DITL_-8173.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=60 x2=444 y2=78
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=33 x2=444 y2=51
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=370 y2=80
# text: "The LaserWriter IISC is still warming up. Please wait for a steady green light on the printer and then click Continue."
DITL_-8172.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# text: ""
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=60 x2=444 y2=78
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=370 y2=80
# text: "The LaserWriter IISC has a hardware problem and needs to be repaired."
DITL_-8171.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# text: ""
# item 1: BUTTON (0x04) enabled
# bounds: x1=380 y1=60 x2=444 y2=78
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=7 x2=370 y2=80
# text: "The LaserWriter IISC is printing a test page. Please wait for the printer to stop, turn it off, and set the SCSI ID number to a number other than 7, as described in the manual."