home *** CD-ROM | disk | FTP | other *** search
- * second stage install running (version 1.1 built Apr 18 1997 14:56:19)
- * /proc/scsi/scsi: Attached devices:
- Host: scsi0 Channel: 00 Id: 00 Lun: 00
- Vendor: SEAGATE Mo
- * scsi devices are available
- * successfully opened: /tmp/hda
- * HDIO_GETGEO ioctl failed - probably cd or tape
- * successfully opened: /tmp/sda
- * successfully opened: /tmp/sdb
- * successfully opened: /tmp/sdc
- * successfully opened: /tmp/sdd
- * /proc/scsi/scsi: Attached devices:
- Host: scsi0 Channel: 00 Id: 00 Lun: 00
- Vendor: SEAGATE Mo
- * scsi devices are available
- * /dev/hda doesn't look like a hard drive
- * running: /sbin/fdisk /sbin/fdisk /tmp/sda
- * found partition sda1
- * found partition sda2
- * found partition sda3
- * running: /sbin/fdisk /sbin/fdisk /tmp/sdb
- * found partition sdb1
- * found partition sdb2
- * found partition sdb3
- * found partition sdb4
- * found partition sdb5
- * found partition sdb6
- * found partition sdb7
- * found partition sdb8
- * found partition sdb9
- * running: /sbin/fdisk /sbin/fdisk /tmp/sdc
- * found partition sdc1
- * found partition sdc2
- * running: /sbin/fdisk /sbin/fdisk /tmp/sdd
- * found partition sdd1
- * found partition sdd2
- * found partition sdd3
- * making symlink from /tmp/rhimage to image
- * psFromHeaderListDesc read 462 headers
- * mounting sda2 on /mnt/ as type ext2
- * opened /mnt/tmp/install.log
- * reading /usr/lib/rpmrc
- * done
- * eth0 is available -- using it for networking
- * running /usr/sbin/timeconfig
- * can't find module loop
- * scanning /proc/mounts for iso9660 filesystems
- * seeing if /tmp/hda is ATAPI CD
- * making device hda (3, 0) as /tmp/hda
- * CDROMVOLREAD ioctl worked
- * /mnt/usr/sbin/setconsole does not exist -- skipping
- * installed kernel version 2.0.29
-