home *** CD-ROM | disk | FTP | other *** search
- Installation Instructions
- for the Future Domain SCSI interface
- and Toshiba Device drivers.
-
- Note: This device driver is specifically for Future Domain
- SCSI controllers it will not work on any other SCSI
- controller.
-
-
- After downloading the file 4E0025.ZIP, you need to create a
- directory called DEV. Copy the driver 16BitCD.sys into this
- directory. This driver works correctly with both 8 and 16
- bit Future Domain controllers.
-
- Add the following line to your CONFIG.SYS file:
-
- Device=\Dev\16BitCD.sys /D:MSCD000 /N:1
-
- In your AUTOEXEC.BAT file add:
-
- \Dos\Mscdex.exe /D:MSCD000
-
- Both of these lines need to be above any Menus or Shell
- commands.
-
- If your are using Dos 6.x or above you will find the Mscdex.exe
- in your DOS sub directory. If you have a lower version of DOS
- you need to get MSCDEX.EXE from MicroSoft.
-
- If you need to assign your CD-ROM a drive letter other than
- "D", you can add "/L:(the drive letter you want it to be) at
- the end of the MSCDEX line in AUTOEXEC.BAT.
-