61 Unable to run selected Macro.\n\nError number 0x%x.
62 sym
63 Active document is not a symbol definition!
64 Error
65 Name already exist
66 Several objects are selected. Do you want to create a group ?
67 Nothing in the select set! Do you want to select the active sheet ?
68 Warning
69 Message
70 No representation added.
71 The selected objet is not a group. Do you want to create a group ?
72 None
73 Remove Action
74 The Macro failed to properly initialize the Command control.
75 The Macro failed to properly define the method Command_Initialize(BasicCmd As Object).
76 Initialization of the Macro failed.\n\nError number 0x%x.
77 Unable to execute file %s.
78 Only a single instance of the Command control is supported on the VB Form.
79 Only a single instance of the Mouse control is supported on the VB Form.
80 \nError number %u.
81 \nError number 0x%x.
82 The system was unable to locate Macro "%s". Please check to ensure that the file exists, the programmatic identifier is properly registered, or the class identifier is properly registered.
92 Document %s is marked read-only, \n it cannot be edited.
93 Sheets
94 %1$s cannot edit the object
95 Document %1$s is currently being used by %2$s. \n It cannot be edited at this time.
96 in
97 Embedded object
98 Display
99 Lock
100 Color
101 Line Type
102 Width
103 Description
104 OK
105 Active Node:
106 Display
107 Lock
108 Color
109 Line Type
110 Width
111 Description
112 Clear
113 Display Manager
114 MS Sans Serif
115 Cancel
116 Click from point
117 Click to point
118 Release to exit
119 Click to zoom out, drag to zoom out dynamically
120 Click for first corner
121 Click for second corner
122 Release button to zoom
123 Click to zoom in; drag to zoom in dynamically.
124 Zoom Out
125 Zoom In
126 Area Zoom
127 Cannot zoom out further, because the view is zoomed out to its maximum.
128 Cannot zoom in further, because the view is zoomed in to its maximum.
129 File New
130 File Open
131 File Save
132 File Close
133 Do you want to save changes to
134 ?
135 normal.igr
136 Rename...
137 Insert
138 Delete
139 SheetSetup...
140 Select All Sheets
141 Activate Sheet
142 Select Sheet
143 Select All Sheets
144 Create Dropped Object(s)
145 Drop File
146 Drag Drop Target
147 Layers
148 Types
149 Filters
150 Layer Groups
151 Print Area
1006 Adds or changes text in a balloon.\nBalloon Text
1008 Specifies the length of the line.\nLine Length
1009 Specifies the angle of the line.\nLine Angle
1011 Returns to the previous path in the Browser window.\nBack
1012 Goes to the next path in the Browser window.\nForward
1013 Stops the display update in the Browser window.\nStop
1014 Out of memory.
1015 Modifies the directory path for the Browser window display.\nBrowse
1016 Updates the display in the Browser window.\nRefresh
1017 Common Units
1018 1
1019 0.1
1020 0.12
1021 0.123
1022 0.1234
1023 0.12345
1024 0.123456
1025 0.1234567
1028 1/4
1029 1/2
1030 1/8
1031 1/16
1032 1/64
1033 1/32
1045 Opens the active document's start page in the Browser window.\nHome
1062 Specifies the font size used in the text box.\nFont Size
1085 Turns the PinPoint tool on and off.\nDisplay On/Off [F9]
1089 Finds grouped elements.\nTop Down
1092 Repositions the PinPoint target.\nReposition Target [F12]
1094 Finds single elements within a group.\nBottom Up
1099 Sets the active style.\nStyle
1102 Specifies the x and y step value.\nX and Y Step Value
1104 Finds elements inside the fence only.\nInside
1108 Finds elements inside and overlapping.\nOverlapping
1114 Specifies the x value.\nX Lock [F10]
1123 Specifies the y value.\nY Lock [F11]
1127 Sets the PinPoint angle.\nPinPoint Angle
1129 Applies a line type override to the active style.\nLine Type
1135 Specifies the font used in the text box.\nFont
1137 Applies a line width override to the active style.\nLine Width
1141 Sets the paragraph alignment.\nParagraph Alignment
1152 Applies a line color override to the active style.\nLine Color
1156 Applies a dimension style or records a style by example.\nDimension Style
1158 Specifies the sweep angle of the arc.\nArc Sweep Angle
1163 Sets the creation mode to lines.\nLine
1166 Specifies the rotation angle.\nRotation Angle
1168 Sets the text to bold.\nBold
1172 Specifies the radius of the arc.\nArc Radius
1173 Sets the creation mode to arcs. (Key-in "a" toggles to arc mode.)\nArc [a]
1182 Specifies the position angle.\nPosition Angle
1183 Sets the text to italic.\nItalic
1184 Specifies the x coordinate of the point.\nX Coordinate
1187 Sets the step angle value.\nStep Angle
1188 Sets the text to underline.\nUnderline
1189 Specifies the y coordinate of the point.\nY Coordinate
1191 Sets the solid color of the fill.\nSolid Color
1193 Specifies options for the circular pattern.\nPattern Options
1194 Specifies the scale factor.\nScale Factor
1197 Sets the vertical justification.\nVertical Justification
1198 Specifies the reference length.\nReference Length
1200 Turns the border display on and off.\nBorder
1202 Displays additional settings for text boxes.\nMore...
1206 Turns adjustment on.\nAdjust On
1208 Creates a copy of the element(s).\nCopy
1209 Selects the type of the dimension.\nDimension Type
1210 Creates an open curve.\nOpen
1211 Turns the smoothing function on.\nSmoothing On
1212 Turns adjustment off.\nAdjust Off
1215 Displays a center mark for elliptical elements.\nAuto Center Mark
1217 Creates a closed curve.\nClosed
1219 Turns the smoothing function off.\nSmoothing Off
1221 Creates lines.\nLine
1225 Sets the step distance value.\nStep Distance
1228 Toggles between driving and driven dimension.\nDriving/Driven
1229 Moves to the previous node.\nPrevious Node
1231 Creates arcs.\nArc
1233 Specifies the space between rows of a circular pattern.\nRow Spacing
1237 Adds supplementary information to a dimension.\nPrefix
1241 Moves to the next node.\nNext Node
1242 Creates circles.\nCircle
1244 Specifies the angle for the distribution of pattern elements.\nOffset Angle
1248 Places a jogged projection line on a radial or coordinate dimension.\nJog
1251 Creates a smooth node.\nSmooth
1252 Creates rectangles.\nRectangle
1255 Specifies the space between pattern elements in the x direction.\nX Offset
1259 Sets the round-off for dimensions.\nRound-off
1263 Creates a symmetrical node.\nSymmetric
1267 Specifies the space between pattern elements in the y direction.\nY Offset
1273 Creates a cusp node.\nCusp
1279 Specifies options for the rectangular pattern.\nPattern Options
1283 Sets and displays the value of the dimension.\nDimension Value
1292 Specifies the angle of the chamfer.\nChamfer Angle
1297 Displays the 360 complement of the dimensioned angle.\nComplement
1300 Specifies the set back 'a' distance.\nSet Back A
1301 Measures the diameter of elements.\nDiameter
1303 Measures the radius of elements.\nRadius
1305 Measures the angle of elements.\nAngle
1306 Specifies the angle of the rectangular pattern.\nPattern Angle
1307 Measures the length of elements.\nLength
1309 Places a jogged connect line on a coordinate dimension.\nCoordinate Jog
1310 Sets the axis for dimension placement.\nDimension Axis
1312 Specifies the set back 'b' distance.\nSet Back B
1331 Specifies the radius of the fillet.\nFillet Radius
1354 Specifies the path for the Browser window display.\nAddress Box
1372 Specifies the length of the extension.\nExtension Length
1384 Specifies the height of the text box.\nText Box Height
1390 Specifies the width of the text box.\nText Box Width
1396 Specifies the angle of the text box.\nText Box Angle
1404 Specifies the x coordinate of the point to move to.\nX Coordinate
1406 Specifies the y coordinate of the point to move to.\nY Coordinate
1414 Specifies the mirror line position angle.\nPosition Angle
1567 Specifies the height of the rectangle.\nRectangle Height
1568 Specifies the width of the rectangle.\nRectangle Width
1569 Specifies the angle of the rectangle.\nRectangle Angle
1570 Specifies the radius of the circle.\nCircle Radius
1571 Specifies the diameter of the circle.\nCircle Diameter
1572 Specifies the primary axis of the ellipse.\nEllipse Primary Axis
1573 Specifies the secondary axis of the ellipse.\nEllipse Secondary Axis
1574 Specifies the angle of the ellipse.\nEllipse Angle
1577 Repeats the command with a new magnitude setting.\nRepeat Command
1578 Exits the Show Variability command.\nExit command
1579 Sets the magnitude of change during a recompute.\nMagnitude of Change
1584 Sets the active style.\nStyle
1585 Sets the group name.\nGroup Name
1586 Specifies the angle of the pattern.\nPattern Angle
1588 Specifies the distance between the pattern lines.\nPattern Spacing
1590 Specifies the scale of fill symbols.\nSymbol Scale
1591 Specifies the y distance between fill symbols.\nY Spacing
1592 Refills modified geometry.\nRedo Fill
1637 Specifies the angle of the symbol fill.\nSymbol Angle
1638 Specifies the x distance between fill symbols.\nX Spacing
1641 Applies a dimension style or records a style by example.\nDimension Style
1642 Applies a dimension style or records a style by example.\nDimension Style
1644 Adds a leader to a balloon.\nLeader
1645 Selects the shape of a balloon.\nShape
1646 Adds a break or hoizontal segment to a leader.\nBreak Line
1648 Creates a linked set of balloons with a single leader.\n Balloon Chain
1654 Adds an arrowhead or other shape to the end of a leader.\nTerminator
1655 Adds a break or hoizontal segment to a leader.\nBreak Line
1682 Sets the layer name.\nLayer Name
1683 Displays the Change Layer dialog.\nChange Layer
1684 Displays the Layer Status dialog.\nLayer Status
10100 Removes selected elements.
10108 Properties
10935 Bring current selection to the front
10936 Send the current selection to the back
10937 Move the current selection up one level
10938 Move the current selection down one level
11306 Edits the selected object.
12001 Click on a line.
12002 Click on the next line.
12003 Click on a keypoint or line.
12005 Click on the next keypoint.
12007 Click on an element.
12009 Click on the next element.
12011 Click on a keypoint.
12012 Click on a keypoint or element.
12013 Click on the next keypoint or line.
12015 Com-10 Wide(9.5in x 4.125in)
12016 Monarch Tall(3.875in x 7.5in)
12017 Monarch Wide(7.5in x 3.875in)
12018 A Tall(8.5in x 11in)
12019 A Wide(11in x 8.5in)
12020 B Tall(11in x 17in)
12021 B Wide(17in x 11in)
12022 Click on the next circle.
12023 Click on the next ellipse.
12024 Click on an arc or circle.
12025 Click on the next element.
12027 Click on the next ellipse or elliptical arc.
12029 Click on the symmetry axis.
12030 Click on the next arc.
12033 The requested change conflicts with existing relationships.
12034 A4 Tall(210mm x 297mm)
12035 A4 Wide(297mm x 210mm)
12036 A3 Tall(297mm x 420mm)
12037 A3 Wide(420mm x 297mm)
12038 A2 Tall(420mm x 594mm)
12039 A2 Wide(594mm x 420mm)
12040 A1 Tall(594mm x 841mm)
12041 A1 Wide(841mm x 594mm)
12042 A0 Tall(841mm x 1189mm)
12043 A0 Wide(1189mm x 841mm)
12044 B5 Tall(182mm x 257mm)
12045 B5 Wide(257mm x 182mm)
12046 B4 Tall(250mm x 354mm)
12047 B4 Wide(354mm x 250mm)
12048 C5 Tall(162mm x 229mm)
12049 C5 Wide(229mm x 162mm)
12050 DL Tall(110mm x 220mm)
12051 DL Wide(220mm x 110mm)
12052 Quatro Tall(215mm x 275mm)
12053 Quatro Wide(275mm x 215mm)
12054 50:1 mm
12055 20:1 mm
12056 10:1 mm
12057 5:1 mm
12058 2:1 mm
12059 1:1 mm
12060 1:2 mm
12061 1:5 mm
12062 1:10 mm
12063 1:20 mm
12064 1:50 mm
12065 1:100 mm
12066 1:200 mm
12067 1:500 mm
12068 1:1000 mm
12069 1:2000 mm
12070 1:5000 mm
12071 1:10000 mm
12072 40:1 in
12073 20:1 in
12074 10:1 in
12075 8:1 in
12076 4:1 in
12077 2:1 in
12078 1:1 in
12079 1:2 in
12080 1:4 in
12081 1:8 in
12082 1:10 in
12083 1:20 in
12084 1:40 in
12085 1:80 in
12086 1:100 in
12087 1/64" = 1'0"
12088 3/32" = 1'0"
12089 1/8" = 1'0"
12090 3/16" = 1'0"
12091 1/4" = 1'0"
12092 3/8" = 1'0"
12093 1/2" = 1'0"
12094 1" = 1'0"
12095 1-1/2" = 1'0"
12096 2" = 1'0"
12097 3" = 1'0"
12098 in
12099 mm
12100 cm
12101 1
12102 0.1
12103 0.01
12104 0.001
12105 meters
12106 cm
12107 Cannot delete the style.
12108 mm
12110 0.0001
12113 100
12114 The default style cannot be deleted.
12115 10
12116 1/2
12117 1
12118 1-sec
12119 10-sec
12120 1-min
12121 Delete Style
12122 10-min
12123 1/4
12124 1-deg
12125 1/8
12126 10-deg
12127 1/16
12128 slope
12129 bearing
12130 Do you want to delete the selected style?
12131 1/32
12132 Black
12133 Blue
12134 Cyan
12135 Green
12136 Magenta
12137 Red
12138 radians
12139 Yellow
12140 White
12141 deg-min-sec
12142 Dk Blue
12143 degrees
12144 Dk Cyan
12145 ft-in
12146 Dk Green
12147 inches
12148 Dk Magenta
12150 Dk Red
12152 Dk Yellow
12154 Dk Gray
12156 Lt Gray
12158 A5 Wide(210mm x 148mm)
12160 A5 Tall(148mm x 210mm)
12161 Arch. E Wide(48in x 36in)
12162 Arch. E Tall(36in x 48in)
12163 Arch. D Wide(36in x 24in)
12164 Arch. D Tall(24in x 36in)
12165 E Wide(44in x 34in)
12166 E Tall(34in x 44in)
12168 Close
12169 D Wide(34in x 22in)
12170 D Tall(22in x 34in)
12171 C Wide(22in x 17in)
12172 C Tall(17in x 22in)
12173 Com-10 Tall(4.125in x 9.5in)
12174 Statement Wide(8.5in x 5.5in)
12175 Statement Tall(5.5in x 8.5in)
12176 Executive Wide(10.5in x 7.5in)
12177 Executive Tall(7.5in x 10.5in)
12178 Legal Wide(14in x 8.5in)
12179 Legal Tall(8.5in x 14in)
12180 Folio Wide(13in x 8.5in)
12181 Folio Tall(8.5in x 13in)
12182 Sheet Setup
12183 In-Line
12184 New Dimension Style
12185 Click on the first element.
12186 Click on the second element.
12187 Click on an approximate center point.
12188 Above
12190 Circle
12191 Modify Dimension Style
12192 Click for trim point.
12193 Click on the first line to chamfer.
12194 Click on the second line to chamfer.
12195 Click to create the chamfer.
12196 Select to point.
12197 Click for the first point of the mirror line.
12198 Click for the second point of the mirror line.
12199 ╝ pt
12200 ╜ pt
12201 ╛ pt
12202 1 pt
12203 2 pt
12204 4 pt
12205 Dot
12206 6 pt
12208 Select from point.
12209 Click for the scale center point.
12210 Click for new scale.
12211 The selected elements will be deleted.
12212 You have selected elements which have dependencies. Deleting the selected elements will require redefinition of the dependent elements shown in <color>. Are you sure you want to delete the selected elements?
12214 A selection set must be active for the Delete command to work.
12215 Click for the scale reference point (corresponds to scale of 1.0).
12216 The value must be greater than 0.
12217 The value must be greater than 1.
12218 The value must be an integer.
12220 Click for the first point of the array rectangle.
12221 Click for the second point of the array rectangle.
12222 The array will be equally spaced and fit to the rectangle.
12223 The array will be placed in the selected quadrant.
12224 A selection set must be active for Rectangular Array command to work.
12226 Click for the center point of the circular array.
12227 Click for the pivot point of the circular array.
12228 Click for the start point of the circular array.
12229 Click for the array end point.
12230 Click on a side for the array arc.
12231 Click the second point of the array arc.
12232 A selection set must be active for the Circular Array command to work.
12233 None
12234 Row
12235 Column
12236 Edit Text
12237 Enter Text Position
12239 SmartSketch
12240 Release mouse button to trim
12242 Select element to trim
12245 Zig-Zag
12246 Underline
12247 None
12262 Element Properties
12263 None
12264 New Text Box Style
12265 Both
12266 New Line Style
12267 Measurement
12269 Origin
12270 Text
12271 None
12272 Line
12273 Zig-Zag
12276 Dimension
12278 All styles
12279 After
12280 Styles in use
12281 Before
12282 User defined styles
12283 None
12284 Style names cannot contain %1$S or %2$S.
12285 Horizontal
12286 Style names cannot be longer than 253 characters.
12287 Vertical
12288 A style with this name already exists.
12289 Dot
12290 Cannot Create Style
12291 Blank
12292 Modify Text Box Style
12293 Anchor
12294 Modify Line Style
12295 Normal
12297 User defined
12299 Circle
12300 Back slash
12301 10-Deg
12302 Slash
12303 1-Deg
12304 Arrow (open)
12305 10-Min
12306 Arrow (filled)
12307 1-Min
12308 Arrow (hollow)
12309 10-Sec
12310 1-Sec
12311 10
12312 1
12313 .1
12314 .12
12315 .123
12316 .1234
12317 .12345
12318 .123456
12319 .1234567
12320 1
12321 1/2
12322 1/4
12323 1/8
12324 1/16
12325 1/32
12327 1/64
12340 Embedded
12342 Above
12343 Perpendicular
12344 {None}
12345 Parallel
12346 Vertical
12348 Horizontal
12350 gradians
12351 Third angle
12352 .1234567
12354 .123456
12355 Deg-Min-Sec
12356 Radians
12357 Degrees
12358 Gradians
12362 ft-in
12363 meters
12364 mm
12365 cm
12366 inches
12377 Click to create jog.
12378 Click on a line or arc to dimension.
12379 Click on an element to dimension.
12380 Click to create the dimension.
12381 Click for center point.
12382 Click on the dimension origin element.
12383 Click on the dimension measurement element.
12384 Click on the common origin element.
12385 Click to create the common origin.
12386 Use the mouse to apply the previously copied format onto other elements.
12387 Use the mouse to apply the previously selected format and style onto other elements.
12389 Click to insert a node.
12390 Click on a node to delete.
12391 Curves cannot contain less than 3 nodes. Cannot complete the Delete Node command.
12392 .12345
12393 .1234
12394 .123
12395 .12
12396 .1
12397 1/64
12398 1/32
12399 1/16
12400 1/8
12401 1/4
12402 1/2
12403 Click on the side of reference line to place the rotated object(s).
12404 Click the point to rotate to.
12405 Click the point to rotate from.
12406 Click for the center of rotation.
12407 Click on the element(s) to modify.
12408 Click for the target.
12409 PinPoint
12410 Click for the first point of the line.
12411 Click for the second point of the line.
12412 Click for the center point of the circle.
12413 Click for a point on the circle.
12414 Click for the first point on the circle.
12415 Click for the second point on the circle.
12416 Click for the third point on the circle.
12420 Click for point.
12421 Press and drag to draw.
12422 Click for the start point of the arc.
12423 Click for a point on the arc.
12424 Click for the end point of the arc.
12425 Click for a point.
12426 Click for the center point of the arc.
12427 Click for the center point of the ellipse.
12428 Click for an end point of the primary axis of the ellipse.
12429 Click for an end point of the Secondary Axis of the ellipse.
12430 Click for the first end point of the primary axis of the ellipse.
12431 Click for the second end point of the primary axis of the ellipse.
12432 Click for a point on the ellipse.
12433 Properties
12434 Click for the first point.
12435 Click for the second point.
12436 Click to create the rectangle.
12437 Release button to finish drawing.
12441 Name
12442 Value
12445 This command is not available because a single element must be selected.
12446 Select only one element before starting the Format Painter command.
12447 Choose one of the options on the command ribbon to continue.
12448 1
12449 2
12450 3
12451 4
12452 5
12453 Preview
12454 Click for the first point.
12455 Click for the second point.
12456 Click for the next point.
12457 Total =
12458 Distance =
12459 Line
12460 Click for the next point.
12461 A
12462 L
12463 The setback distance must be smaller than the length of the line.
12464 Chamfer
12467 Area =
12468 Click on area.
12469 The selected style is in use.\nDo you want to delete it anyway?
12473 3/4" = 1'0"
12489 The style must have a name.
12493 Place Line
12494 Place Arc
12496 Drop Line String
12497 Drop Complex String
12498 Place Ellipse
12499 Place Circle
12500 Place Curve
12501 Place Rectangle
12502 Place Freesketch
12504 Place Fillet
12505 Place Chamfer
12506 Place Fill
12507 Place Point
12508 Insert Node
12509 Delete Node
12510 Place Dimension
12511 Place Text Box
12513 Place Leader
12514 Place Balloon
12515 Connect Relationship
12516 Horizontal Relationship
12517 Parallel Relationship
12518 Perpendicular Relationship
12519 Colinear Relationship
12520 Concentric Relationship
12521 Tangent Relationship
12522 Equal Relationship
12523 Symmetric Relationship
12524 Lock Relationship
12525 Trim
12526 Extend
12527 Corner Trim
12528 Delete
12529 Cut
12530 Paste
12531 Move
12532 Rotate
12533 Mirror
12534 Scale
12535 Rectangular Pattern
12536 Circular Pattern
12543 Copy
12544 Style Override
12545 Insert Sheet
12547 Insert Object
12553 Sheet Setup
12554 Delete Sheet
12555 Rename Sheet
12556 Format Dimension
12563 Modify Line
12564 Modify Arc
12568 Modify Ellipse
12569 Modify Elliptical Arc
12570 Modify Circle
12571 Modify Curve
12572 Modify Rectangle
12575 Modify Fillet
12576 Modify Chamfer
12577 Paste Special
12578 Modify Point
12579 Modify Dimension
12580 Modify Text Box
12582 Modify Leader
12583 Modify Balloon
12584 Line Properties
12585 Arc Properties
12589 Ellipse Properties
12590 Elliptical Arc Properties
12591 Circle Properties
12592 Curve Properties
12593 Rectangle Properties
12594 Fillet Properties
12595 Chamfer Properties
12596 Fill Properties
12597 Point Properties
12598 Dimension Properties
12599 Text Box Properties
12601 Leader Properties
12602 Balloon Properties
12603 Group Properties
12606 Element Keyin
12607 Modify Elements
12608 Element Symbology
12609 Place Symmetric Axis
12610 X
12611 C
12612 V
12616 The dimension cannot be placed.
12617 Object
12620 left
12621 center
12622 right
12623 top
12624 middle
12625 bottom
12626 bold
12627 regular
12628 italic
12629 bold italic
12630 Default Properties
12631 Close Curve
12632 Open Curve
12633 Symmetric
12634 Cusp
12635 Justify
12636 Layer
12637 Smooth
12638 Working Sheets
12639 Background Sheets
12640 Single
12641 Double
12642 1.5
12643 none
12644 Format Line
12645 Format Dimension
12646 Format Text Box
12647 Paper
12648 Dimension Properties
12649 Text Box Properties
12650 Fill Properties
12651 World
12652 Left
12653 Group Properties
12655 Right
12656 Center
12657 Save Defaults
12658 Reference
12659 Viewport
12660 Office Automation
12661 Modify Object
12662 Left Margin
12663 The radius for a fillet must be a positive \nvalue greater than zero.
12664 Modify Fill
12665 Layers with objects placed\non them cannot be deleted.
12666 The active layer cannot\nbe deleted.
12667 Center Margin
12668 Groups
12669 Layers
12670 Fillet
12671 Edit Properties
12672 Properties for dissimilar element \ntypes cannot be displayed.
12673 Grouped
12674 Description
12675 The layer group:
12676 already exists. Key in a unique layer group name.
12677 The layer:
12678 already exists. Key in a unique layer name.
12679 Right Margin
12680 Baseline
12681 Insert Break Point
12682 Remove Break Point
12683 Connect Leader
12684 Disconnect Leader
12685 Layer Groups
12686 All
12687 Linear Unit
12688 Angular Unit
12689 Linear Roundoff
12690 Angular Roundoff
12691 Font
12692 =
12693 +
12694 ,
12695 Click on the second element.
12696 ft
12697 Click for the first corner.
12698 Click for the second corner.
12699 Top
12700 Native
12701 Objects
12702 Center
12703 Bottom
12704 Horizontal
12705 Vertical
12706 Left
12707 Top Margin
12708 Center Margin
12709 Bottom Margin
12710 Auto
12711 Exactly
12712 At Least
12713 Left to Right
12714 Right to Left
12715 Top
12716 Center
12717 Right
12718 Bottom
12719 justify
12720 Text Ribbon Ex
19002 Sets the rotation angle for the placement.\nAngle
19003 Sets the scale factor for the placement.\nScale Factor
19004 Sets the default style for the placement.\nDefault Style
19006 Create symbol from graphics.\nCreate Symbol
19100 Symbol Properties
19102 Symbol
19103 Symbol Ribbon Bar
19105 As Drawn
19106 As Drawn
19107 PropertyName
19108 Convert Symbol To Graphic
19109 Open Symbol
19110 Edit Symbol Properties
19111 Edit Symbol Properties ( Apply %d )
19112 Name
19113 Type
19114 Value
19115 Fit cannot display all graphics. \nIncrease sheet scale to view all graphics.
19116 Maximum Zoom-in level has been reached. \nDecrease sheet scale to zoom in further.
19122 Number
19123 Symbol (*.sym),*.sym
19124 Click to define the symbol origin.
19125 Browser
19126 Not allowed
19127 Allowed
19128 Behavior
19129 Edit Symbol Behavior Properties
19130 The symbol document
19131 Application
19132 can not be found. Please update the link for this symbol document.
20256 Specifies the Class Fit for the dimension.\nClass Fit
20259 Sets the text orientation to horizontal.\nHorizontal Text Orientation
20260 Sets the text orientation to vertical.\nVertical Text Orientation
20261 Sets character flow direction to left to right.\nLeft to Right
20262 Sets the character flow direction to right to left.\nRight to Left
20280 Specifies the number of elements in the circular pattern.\nPattern Count
20281 Specifies the number of rows in the circular pattern.\nNumber of Rows
20282 Specifies the number of pattern elements in the x direction.\nX Count
20283 Specifies the number of pattern elements in the y direction.\nY Count
20284 Sets the pattern color of the fill.\nPattern Color
20285 Specifies the number of sides on the balloon shape.\nNumber of Sides
20286 Specifies the ratio of the balloon length to its height.\nLength
20290 Set the symmetric diameter display to half or full.\nHalf/Full
20291 Specifies the lower tolerance for a dimension.\nLower Tolerance
20292 Specifies the upper tolerance for a dimension.\nUpper Tolerance
20299 Specifies the ratio of the balloon height to the text size.\nHeight Ratio
20318 Select the geometry to offset.\nSelect
20320 Select the side in which the offset is to be placed.\nSide
20324 Select single element at a time.\nSelect Single
20325 Offset from the previous offset.\nOffset from Previous
20326 Selects a chain of elements, instead of each one.\nSelect Chain
20327 Offset from the original geometry.\nOffset from Original.
20345 Sets the text color.\nText Color
32783 Makes selected dimensions Not to Scale.
32784 Bring up the properties dialog
32785 Bring the current selection to the front
32786 Send the current selection to the back
32787 Move the current selection up one level
32788 Move the current selection down one level
32789 Organizer
32790 Normal.igr
32791 Inserts a node into the active curve.
32792 Deletes a node from the active curve.
32793 Copy >>
32794 Copy <<
32795 Do you want to overwrite the existing style entry %s?
32797 All Files (*.*),*.*,
32798 Document (*.igr),*.igr,
40011 Breaks the curve into two curves.
40012 In
40014 Do you want to delete the style %s?
40015 Open File...
40016 Close File
40017 Close
57600 Creates a new document or template.\nNew
57601 Opens an existing document or template.\nOpen
57603 Saves the active document or template.\nSave
57607 Prints the active document.\nPrint
57634 Copies the current selection.
57635 Cuts the current selection.
57637 Pastes objects.
57639 Click on an element to extend.
57640 Click to create extension.
57641 Release to extend elements.
57642 Click on the first element.
57644 Press and drag over elements to corner.
57645 open
57646 symmetrical
57647 Displays grid.
57648 While drawing,snaps to nearest grid point in active view\nGrid Snap
57649 Click on first line to make perpendicular.
57650 Click on second line, arc, or circle to make perpendicular.
57651 Click on an element or free-space point.
57652 Click on an existing balloon or free-space point.
57653 Click to create a balloon.
57654 Click on an element, existing balloon, or free-space point.
57655 Click on existing leader or annotation.
57656 Selected Sheets will be permanently deleted. Continue?
57657 Cannot rename a sheet with the same name as another sheet.
57661 Converts the symbol to graphics.
57662 In-place activates the symbol object.
57663 Opens the symbol object.
57664 Paused
57665 Error
57666 Pending Deletion
57667 Paper Jam
57668 Paper Out
57669 Manual Feed
57670 Paper Problem
57671 Offline
57672 IO Active
57673 Busy
57674 Printing
57675 Output Bin Full
57676 Not Available
57677 Waiting
57678 Processing
57679 Initializing
57680 Warming Up
57681 Toner Low
57682 No Toner
57683 Page Punt
57684 User Intervention
57685 Out of Memory
57686 Door Open
57687 Ready
57688 Number of copies must be between 1 and 32767
57689 Error
57690 Print to File
57691 Printer File (*.pri),*.pri,
57692 pri
57758 Converts a line string to individual lines.
57759 Converts a complex string to individual lines and arcs.
57760 Remove moved objects
57764 Add Style Resource
57765 Imagineer (*.igr)
57766 MicroStation (*.rsc)
61501 Fit to sheet
61502 Cannot modify this style because it is a complex style. \nUse the ribbon bar to create an override style.
61503 Cannot create a new style with \nthis complex style as its parent.
61508 No offset is possible at this cumulative distance in this direction from the selected geometry.
61509 The server application, source file, or item cannot be found. Make sure the application is properly installed, and that it has not been deleted, moved or renamed.
61510 You cannot add font resources with this command.\nInstead, use the Options command on the Tools menu.\nOn the File Locations tab, set the paths for the fonts.
61511 Style Resources
61512 Cannot find one or more specified sheets.
61513 Styles not in use
61514 Select the contiguous geometry to be offset.
61515 Place the offset geometry by left clicking.
61516 IDS_APP.
61517 The selected set is invalid.
61518 Cumulative Distance should be greater than zero.
61519 APP
61520 Undo the previous offset.
61521 IDC
61523 Type
61524 <Unpopulated>
61525 Default
61526 Text
61527 Number
61528 Money
61529 Date
61530 Unknown Type
61531 Invalid attribute value
61532 Error in attribute value
61533 Are you sure you want to delete attribute set: %s?
61534 Do you want to save changes to attribute set: %s?
61535 Step Distance should be greater than zero.
61536 Double
61537 Offset
61538 Text Left
61539 Text Center
61540 Text Right
61541 Shape Left
61542 Shape Center
61543 Shape Right
61544 Text Baseline
61545 Text Top
61546 Text Capline
61547 Text Half Ascender
61548 Text Half Cap
61549 Text Center
61550 Text Bottom
61551 Shape Top
61552 Shape Center
61553 Shape Bottom
61554 Cannot insert file. This file is not a valid symbol file.
61555 Insert Symbol
61556 Invalid attribute name
61557 Error in attribute name
61558 H
61559 D
61560 A
61561 A Document must contain at least one sheet.\nTo delete the selected sheet(s), you must first insert a new sheet
