<p>With 3Ddiag you can verify the 3D configuration.
</p>
-Des:
##----------------------------------------
=Pkg: 915resolution 0.5.2 15 i586
=Sum: This software changes the resolution of an available vbios mode.
+Des:
<!-- DT:Rich -->
<p>This software changes the resolution of an available vbios mode.
</p><p>
It patches only the RAM version of the video bios so the new resolution
is loose each time you reboot. If you want to set the resolution each
time you reboot and before to launch X, use your rc.local, local.start ...
file of your Linux version.
</p><p>
915resolution supports the 845G, 855GM, 865G, 915G, 915GM, 945G, and 945GM chipsets.
</p>
-Des:
##----------------------------------------
=Pkg: BitTorrent 4.0.3 40 i586
=Sum: Scatter-Gather Network File Transfer
+Des:
<!-- DT:Rich -->
<p>BitTorrent is a tool for distributing files. It's extremely easy to use - downloads are started by clicking on hyperlinks. Whenever more than one person is downloading at once they send pieces of the file(s) to each other, thus relieving the central server's bandwidth burden. Even with many simultaneous downloads, the upload burden on the central server remains quite small, since each new downloader introduces new upload capacity.
</p>
-Des:
##----------------------------------------
=Pkg: CheckHardware 0.1 1017 i586
=Sum: CheckHardware Tool
+Des:
<!-- DT:Rich -->
<p>A tool to verify hardware requirements.
</p>
-Des:
##----------------------------------------
=Pkg: DirectFB 0.9.25 29 i586
=Sum: Graphics Library for Framebuffer Devices
+Des:
<!-- DT:Rich -->
<p>DirectFB is a thin library that provides hardware graphics acceleration, input device handling and abstraction, an integrated windowing system with support for translucent windows, and multiple display layers on top of the Linux framebuffer device. It is a complete hardware abstraction layer with software fallbacks for every graphics operation that is not supported by the underlying hardware. DirectFB adds graphical power to embedded systems and sets a new standard for graphics under Linux.
</p>
-Des:
##----------------------------------------
=Pkg: DirectFB-devel 0.9.25 29 i586
=Sum: Graphics Library for Framebuffer Devices
+Des:
<!-- DT:Rich -->
<p>DirectFB is a thin library that provides hardware graphics acceleration, input device handling and abstraction, an integrated windowing system with support for translucent windows, and multiple display layers on top of the Linux framebuffer device. It is a complete hardware abstraction layer with software fallbacks for every graphics operation that is not supported by the underlying hardware. DirectFB adds graphical power to embedded systems and sets a new standard for graphics under Linux.
</p>
-Des:
##----------------------------------------
=Pkg: ElectricFence 2.2.2 561 i586
=Sum: Malloc Debugger
+Des:
<!-- DT:Rich -->
<p>Tool for debugging your C programs (malloc debugger).
</p>
-Des:
##----------------------------------------
=Pkg: FA_clalsadrv 1.1.0 21 i586
=Sum: ALSA Driver C++ Access Library
+Des:
<!-- DT:Rich -->
<p>C++ wrapper around the ALSA API. This package includes
the shared library object.
</p>
-Des:
##----------------------------------------
=Pkg: FA_clthreads 2.2.0 17 i586
=Sum: Library Required for AEOLUS and JAAA
+Des:
<!-- DT:Rich -->
<p>Library required for AEOLUS and JAAA.
</p>
-Des:
##----------------------------------------
=Pkg: FA_clxclient 3.3.0 19 i586
=Sum: Library Required for AEOLUS and JAAA
+Des:
<!-- DT:Rich -->
<p>Library required for AEOLUS and JAAA.
</p>
-Des:
##----------------------------------------
=Pkg: GraphicsMagick 1.1.7 24 i586
=Sum: Viewer and Converter for Images
+Des:
<!-- DT:Rich -->
<p>GraphicsMagick(TM) provides a powerful image manipulation and
translation utility. It is capable of displaying still images and
animations using the X Window system, provides a simple interface for
interactively editing images, and is capable of importing selected
windows or the entire desktop. GraphicsMagick can read and write over
88 image formats, including JPEG, TIFF, WMF, SVG, PNG, PNM, GIF, and
Photo CD. It can resize, rotate, sharpen, color reduce, or add special
effects to the image and save the result to any supported format.
GraphicsMagick may be used to create animated or transparent .gifs,
create composite images, create thumbnail images, and much, much,
more.
</p><p>
GraphicsMagick is one of your choices if you need a program to manipulate
and display images. If you want to develop your own applications
which use GraphicsMagick code or APIs, you need to install
GraphicsMagick-devel as well.
</p><p>
This package is compiled with Q8, that means it provides better performance
on 8 and less bit images.
</p>
-Des:
##----------------------------------------
=Pkg: ImageMagick 6.3.0.0 16 i586
=Sum: Viewer and Converter for Images
+Des:
<!-- DT:Rich -->
<p>ImageMagick is a robust collection of tools and libraries to read, write,
and manipulate an image in many image formats, including popular formats
like TIFF, JPEG, PNG, PDF, PhotoCD, and GIF. With ImageMagick, you can
create images dynamically, making it suitable for Web applications.
You can also resize, rotate, sharpen, color-reduce, or add special effects
to an image and save your completed work in many different image formats.
Image processing operations are available from the command line as well
as through C, C++, and PERL-based programming interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: ImageMagick-Magick++ 6.3.0.0 16 i586
=Sum: C++ Interface for ImageMagick - runtime library
+Des:
<!-- DT:Rich -->
<p>This is Magick++, the object-oriented C++ API for the ImageMagick
image-processing library.
</p><p>
Magick++ supports an object model inspired by PerlMagick. Magick++
should be faster than PerlMagick since it is written in a compiled
language which is not parsed at run-time. This makes it suitable for Web CGI
programs. Images support implicit reference counting so that copy
constructors and assignment incur almost no cost. The cost of actually
copying an image (if necessary) is done just before modification and this
copy is managed automatically by Magick++. De-referenced copies are
automatically deleted. The image objects support value (rather than
pointer) semantics so it is trivial to support multiple generations of an
image in memory at one time.
</p>
-Des:
##----------------------------------------
=Pkg: ImageMagick-Magick++-devel 6.3.0.0 16 i586
=Sum: C++ Interface for ImageMagick - files mandatory for development
+Des:
<!-- DT:Rich -->
<p>This is Magick++, the object-oriented C++ API for the ImageMagick
image-processing library.
</p><p>
Magick++ supports an object model inspired by PerlMagick. Magick++
should be faster than PerlMagick since it is written in a compiled
language which is not parsed at run-time. This makes it suitable for Web CGI
programs. Images support implicit reference counting so that copy
constructors and assignment incur almost no cost. The cost of actually
copying an image (if necessary) is done just before modification and this
copy is managed automatically by Magick++. De-referenced copies are
automatically deleted. The image objects support value (rather than
pointer) semantics so it is trivial to support multiple generations of an
image in memory at one time.
</p>
-Des:
##----------------------------------------
=Pkg: ImageMagick-devel 6.3.0.0 16 i586
=Sum: Include Files and Libraries Mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>ImageMagick is a robust collection of tools and libraries to read, write,
and manipulate an image in many image formats, including popular formats
like TIFF, JPEG, PNG, PDF, PhotoCD, and GIF. With ImageMagick, you can
create images dynamically, making it suitable for Web applications.
You can also resize, rotate, sharpen, color-reduce, or add special effects
to an image and save your completed work in many different image formats.
Image processing operations are available from the command line as well
as through C, C++, and PERL-based programming interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: Maelstrom 3.0.6 40 i586
=Sum: A High Quality Asteroids Clone
+Des:
<!-- DT:Rich -->
<p>You are on space patrol. Blast asteroids, fight UFOs, and get extra weapons.
Beware of supernovae and black holes.
</p>
-Des:
##----------------------------------------
=Pkg: MainActor-5 5.5.7 42 i586
=Sum: A Demo Version of a Video Editor (DV,MPEG)
+Des:
<!-- DT:Rich -->
<p>MainActor v5 is the successor of the popular MainActor 3.65. The new version of the
video-editing software contains a lot of improved features of the old edition as well as
numerous new functions that make it easy to edit your videos in professional quality.
</p><p>
The powerful MainActor v5 allows you to capture, edit, and export your videos with
your computer. Our new software offers innumerable audio and video tracks for working on a project. You can add transitions and effects to the clips to
produce professional videos. The MainConcept product offers the time-saving
backround rendering as well as fast rendering and smart rendering for enhancing
productivity. The windows-based interface helps you to have all the important
functions within easy reach. You can arrange the different windows according
to your needs, enabling you to create a custom interface.
</p>
-Des:
##----------------------------------------
=Pkg: Mesa 6.5.1 23 i586
=Sum: Mesa is a 3-D graphics library with an API which is very similar to that of OpenGL.*
+Des:
<!-- DT:Rich -->
<p>Mesa is a 3-D graphics library with an API which is very similar to that of OpenGL.* To the extent that Mesa utilizes the OpenGL command syntax or state machine, it is being used with authorization from Silicon Graphics, Inc.(SGI). However, the author does not possess an OpenGL license from SGI, and makes no claim that Mesa is in any way a compatible replacement for OpenGL or associated with SGI. Those who want a licensed implementation of OpenGL should contact a licensed vendor.
</p><p>
Please do not refer to the library as MesaGL (for legal reasons). It's just Mesa or The Mesa 3-D graphics library.
<ul>
<li>OpenGL is a trademark of Silicon Graphics Incorporated.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: Mesa-devel 6.5.1 23 i586
=Sum: Libraries, includes and more to develop Mesa applications
+Des:
<!-- DT:Rich -->
<p>Mesa is a 3-D graphics library with an API which is very similar to
that of OpenGL.* To the extent that Mesa utilizes the OpenGL command
syntax or state machine, it is being used with authorization from
Silicon Graphics, Inc.(SGI). However, the author does not possess an
OpenGL license from SGI, and makes no claim that Mesa is in any way a
compatible replacement for OpenGL or associated with SGI. Those who
want a licensed implementation of OpenGL should contact a licensed
vendor.
</p><p>
Please do not refer to the library as MesaGL (for legal reasons). It's
just Mesa or The Mesa 3-D graphics library.
<ul>
<li>OpenGL is a trademark of Silicon Graphics Incorporated.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: Mesa-devel-static 6.5.1 23 i586
=Sum: Static GL library - Usually not required at all
+Des:
<!-- DT:Rich -->
<p>Static GL library. It is not recommended at all to link against the
static GL library. Only included for legacy reasons.
</p>
-Des:
##----------------------------------------
=Pkg: MesaGLw 6.5.1 21 i586
=Sum: Mesa Widget library
+Des:
<!-- DT:Rich -->
<p>Widget library for Mesa.
</p>
-Des:
##----------------------------------------
=Pkg: MesaGLw-devel 6.5.1 21 i586
=Sum: Libraries, includes and more to develop MesaGLw applications
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: Modules 3.1.6 69 i586
=Sum: Environment Modules
+Des:
<!-- DT:Rich -->
<p>The Modules package provides for dynamic modification of a user's
environment with module files. Each module file contains the information
needed to configure the shell for an application. Once the
package is initialized, the environment can be modified dynamically
on a per-module basis using the module command that interprets
module files. Typically, module files instruct the module command to alter or
set shell environment variables, such as PATH or MANPATH. Module files
may be shared by many users on a system and users may have their own
collection to supplement or replace the shared module files. The modules
environment is common on SGI/Crays and many workstation farms.
</p>
-Des:
##----------------------------------------
=Pkg: MozillaFirefox 2.0 30 i586
=Sum: Mozilla Firefox Web Browser
+Des:
<!-- DT:Rich -->
<p>Mozilla Firefox, formerly known as Phoenix and Firebird, is a redesign of the Mozilla browser component, similar to Galeon, K-Meleon and Camino, but written using the XUL user interface language and designed to be cross-platform.
It is a stand-alone application instead of part of the Mozilla Application Suite.
</p>
-Des:
##----------------------------------------
=Pkg: MozillaFirefox-translations 2.0 30 i586
=Sum: Translations for MozillaFirefox
+Des:
<!-- DT:Rich -->
<p>This package contains several optional languages for the user interface of
MozillaFirefox.
</p>
-Des:
##----------------------------------------
=Pkg: MozillaSunbird 0.3 15 i586
=Sum: Mozilla's Calendar Application
+Des:
<!-- DT:Rich -->
<p>The Sunbird Project is a redesign of the Mozilla Calendar component. The
goal is to produce a cross-platform stand-alone calendar application based
on Mozilla's XUL user interface language. At the moment, the Sunbird name
is a project name. It is not official and may change in the future.
</p><p>
The intended user is someone who uses Mozilla Firefox and Mozilla
Thunderbird and wants a calendar application based on Mozilla.
</p>
-Des:
##----------------------------------------
=Pkg: MozillaSunbird-translations 0.3 15 i586
=Sum: Translations of Mozilla Sunbird
+Des:
<!-- DT:Rich -->
<p>This package contains the additional languages for Sunbird.
</p><p>
The Sunbird Project is a redesign of the Mozilla Calendar component. The
goal is to produce a cross-platform stand-alone calendar application based
on Mozilla's XUL user interface language. At the moment, the Sunbird name
is a project name. It is not official and may change in the future.
</p><p>
The intended user is someone who uses Mozilla Firefox and Mozilla
Thunderbird and wants a calendar application based on Mozilla.
</p>
-Des:
##----------------------------------------
=Pkg: MozillaThunderbird 1.5.0.8 3 i586
=Sum: The Stand-Alone Mozilla Mail Component
+Des:
<!-- DT:Rich -->
<p>Mozilla Thunderbird is a redesign of the Mozilla Mail component.
It is written using the XUL user interface language and designed to be cross-platform.
It is a stand-alone application instead of part of the Mozilla application suite.
<p>NetworkManager-vpnc provides VPN support to NetworkManager for vpnc.
</p>
-Des:
##----------------------------------------
=Pkg: OpenEXR 1.2.2 36 i586
=Sum: Library to Handle EXR Pictures in 16-Bit Floating-Point Format
+Des:
<!-- DT:Rich -->
<p>OpenEXR is a high dynamic-range (HDR) image file format developed by Industrial Light & Magic for use in computer imaging applications.
<ul>
<li>exrheader, a utility for dumping header information
</li><li>exrstdattr, a utility for modifying OpenEXR standard attributes
</li><li>exrmaketiled, for generating tiled and rip/mipmapped images
</li><li>exrenvmap, for creating OpenEXR environment maps
</li><li>exrmakepreview, for creating preview images for OpenEXR files
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org 2.0.4 38 i586
=Sum: A Free Office Suite (Language-Independent Part)
+Des:
<!-- DT:Rich -->
<p>A comprehensive office package featuring a word processor, a spreadsheet, a presentation program, and much more.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-Quickstarter 1.0 514 i586
=Sum: OpenOffice.org Quickstarter
+Des:
<!-- DT:Rich -->
<p>This package allows you to work comfortably with OpenOffice.org in KDE
through the use of a small applet that runs in the Kicker.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-cs 2.0.4 38 i586
=Sum: Czech Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Czech localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-da 2.0.4 38 i586
=Sum: Danish Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Danish localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-de 2.0.4 38 i586
=Sum: German Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>German localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-en-GB 2.0.4 38 i586
=Sum: British Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>British localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-es 2.0.4 38 i586
=Sum: Spanish Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Spanish localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-fi 2.0.4 38 i586
=Sum: Finnish Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Finnish localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-fr 2.0.4 38 i586
=Sum: French Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>French localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-gnome 2.0.4 38 i586
=Sum: GNOME Extensions for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This package contains some GNOME extensions for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-hu 2.0.4 38 i586
=Sum: Hungarian Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Hungarian localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-it 2.0.4 38 i586
=Sum: Italian Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Italian localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-ja 2.0.4 38 i586
=Sum: Japanese Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Japanese localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-kde 2.0.4 38 i586
=Sum: KDE Extensions for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This package contains some KDE extensions for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-km 2.0.4 38 i586
=Sum: Khmer Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Khmer localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-mono 2.0.4 38 i586
=Sum: Mono UNO Bridge for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Mono/UNO binding allows a Mono application to access the complete
set of APIs exposed by OpenOffice.org via UNO. A trivial example use-case might be a small mono application to create a spreadsheet, populate it with data,
charts, formatting, then save that in Excel format.
</p><p>
Currently the use of Mono for add-ins & scripting inside OO.o itself is
not supported.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-nb 2.0.4 38 i586
=Sum: Norwegian Bokmaal Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Norwegian Bokmaal localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-nl 2.0.4 38 i586
=Sum: Dutch Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Dutch localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-pl 2.0.4 38 i586
=Sum: Polish Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Polish localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-pt-BR 2.0.4 38 i586
=Sum: Brazilian Portuguese Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Brazilian Portuguese localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-zh-CN 2.0.4 38 i586
=Sum: Chinese Simplified Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Chinese simplified localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-zh-TW 2.0.4 38 i586
=Sum: Chinese Traditional Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Chinese traditional localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: PgTcl 1.5 35 i586
=Sum: Tcl Client Library for PostgreSQL
+Des:
<!-- DT:Rich -->
<p>This package contains the libpgtcl client library
as a loadable Tcl package. It is needed to access PostgreSQL
databases from Tcl scripts.
</p>
-Des:
##----------------------------------------
=Pkg: PolicyKit 0.2_git20060822 28 i586
=Sum: PolicyKit
+Des:
<!-- DT:Rich -->
<p>PolicyKit is a framework for defining policy for system-wide components and for desktop pieces to configure it. It is used by HAL.
</p>
-Des:
##----------------------------------------
=Pkg: QtDMM 0.8.7 35 i586
=Sum: DMM Readout Software Including a Configurable Recorder
+Des:
<!-- DT:Rich -->
<p>QtDMM is a DMM readout software including a configurable recorder. The recorder features manual start, scheduled start (at a given time), and
triggered automatic start when given thresholds are reached. Additionally,
you can start an external application when given thresholds are reached.
</p><p>
Although initially written for Metex (and compatible, like VOLTCRAFT)
multimeter, which use a 14-byte protocol, several more protocols
have been added. For more information about the currently supported DMMs,
refer to the preset table.
</p>
-Des:
##----------------------------------------
=Pkg: RealPlayer 10.0.8 33 i586
=Sum: RealPlayer 10 for Linux
+Des:
<!-- DT:Rich -->
<p>RealPlayer is a media player providing solid media playback locally
and via streaming. It plays RealAudio, RealVideo, MP3, 3GPP Video,
Flash, SMIL 2.0, JPEG, GIF, PNG, RealPix, RealText, and
more. RealPlayer 10 for Linux builds on top of the popular
GPL/RPSL Helix Player 1.0.
</p>
-Des:
##----------------------------------------
=Pkg: SDL 1.2.11 22 i586
=Sum: Simple DirectMedia Layer Library
+Des:
<!-- DT:Rich -->
<p>This is the "Simple DirectMedia Layer" library. It provides a generic
API for access to audio, keyboard, mouse, and display framebuffer
across multiple platforms.
</p>
-Des:
##----------------------------------------
=Pkg: SDL-devel 1.2.11 22 i586
=Sum: SDL Library Developer Files
+Des:
<!-- DT:Rich -->
<p>This package contains files needed for development with the
SDL library.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_Pango 0.1.2 10 i586
=Sum: Programming Pango via SDL
+Des:
<!-- DT:Rich -->
<p>Pango is the text rendering engine of GNOME 2.x. SDL_Pango connects
the engine to SDL.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_Pango-devel 0.1.2 10 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
<p>This is a small cross-platform networking library for use with SDL.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_perl 1.20.0 395 i586
=Sum: Glue between Perl and SDL
+Des:
<!-- DT:Rich -->
<p>Programming SDL with Perl.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_ttf 2.0.8 25 i586
=Sum: Simple DirectMedia Layer--Truetype Library
+Des:
<!-- DT:Rich -->
<p>This is a sample library that allows you to use TrueType fonts in your SDL applications.
</p>
-Des:
##----------------------------------------
=Pkg: TeX-Guy 1.2.4 449 i586
=Sum: DVI Interpreter Library and Utilities for Displaying and Printing
+Des:
<!-- DT:Rich -->
<p>The TeX-Guy package contains a device-independent DVI interpreter
library (DVIlib) and a set of device controlling programs for
the X Window System and printers.
</p><p>
<ul>
<li>It is recommended to use "xgdvi", "spawx11", or "spawg" as
previewers, because they support antialiasing.
(Other previewers are sample implementations and not as good.)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: TeX-Guy-devel 1.2.4 449 i586
=Sum: DVI Interpreter Library and Utilities for Displaying and Printing
+Des:
<!-- DT:Rich -->
<p>The TeX-Guy-devel package contains a device-independent DVI interpreter
library (DVIlib) and a set of device controlling programs for
the X Window System and printers.
</p><p>
<ul>
<li>It is recommended to use "xgdvi", "spawx11", or "spawg" as
previewers, because they support antialiasing.
(Other previewers are sample implemenation and not as good.)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: TeXmacs 1.0.6.6 14 i586
=Sum: A Structured WYSIWYG Scientific Text Editor
+Des:
<!-- DT:Rich -->
<p>GNU TeXmacs is a free scientific text editor, inspired
by TeX and GNU Emacs. The editor allows you to write structured documents
via a WYSIWYG (what-you-see-is-what-you-get) and user friendly interface.
New styles can be created by the user. The program implements high-quality
typesetting algorithms and TeX fonts, which help you to produce
professional looking documents.
</p><p>
The high typesetting quality still goes through for automatically
generated formulas, which makes TeXmacs suitable as an interface
for computer algebra systems. TeXmacs also supports the Guile/Scheme
extension language, so that you may customize the interface and
write your own extensions to the editor.
</p><p>
In the future, TeXmacs is planned to evolve towards
a complete scientific office suite, with spreadsheet capabilities,
a technical drawing editor, and a presentation mode.
</p>
-Des:
##----------------------------------------
=Pkg: VFlib3 3.6.13 303 i586
=Sum: Versatile Font Library
+Des:
<!-- DT:Rich -->
<p>VFlib is a font library written in C language with several functions
to obtain bitmaps of fonts. Unique feature of VFlib is that fonts
in different formats are accessed by unified interface.
</p><p>
</p><p>
VFlib supports the following font formats:
TeX fonts: PK, GF, VF, TFM
Omega TeX fonts: OFM (level 0), OVF
X Window fonts: PCF, BDF
Other fonts: TrueType, Type 1, HBF, Syotai Club, JG, ekanji
</p>
-Des:
##----------------------------------------
=Pkg: VFlib3-devel 3.6.13 303 i586
=Sum: development libraries for VFlib3
+Des:
<!-- DT:Rich -->
<p>development libraries for VFlib3
</p>
-Des:
##----------------------------------------
=Pkg: WindowMaker 0.92.0 45 i586
=Sum: A Colorful and Flexible Window Manager
+Des:
<!-- DT:Rich -->
<p>Window Maker is a colorful and flexible window manager and the
designated successor of AfterStep.
</p><p>
The themes make it very interesting.
For more details, check http://www.windowmaker.org.
</p>
-Des:
##----------------------------------------
=Pkg: WindowMaker-applets 1.0 701 i586
=Sum: Window Maker Applets
+Des:
<!-- DT:Rich -->
<p>Some small applications for Window Maker.
</p>
-Des:
##----------------------------------------
=Pkg: Xalan-c 1.10 30 i586
=Sum: An XSLT Transformation Engine in C++
+Des:
<!-- DT:Rich -->
<p>Xalan is an XSL processor for transforming XML documents
into HTML, text, or other XML document types. Xalan-C++ represents an
almost complete and robust C++ reference implementation of the W3C
Recommendations for XSL Transformations (XSLT) and the XML Path
Language (XPath).
</p>
-Des:
##----------------------------------------
=Pkg: Xerces-c 2.7.0 31 i586
=Sum: A Validating XML Parser
+Des:
<!-- DT:Rich -->
<p>Xerces-C is a validating XML parser written in a portable subset of
C++. Xerces-C makes it easy to give your application the ability to
read and write XML data. A shared library is provided for parsing,
generating, manipulating, and validating XML documents. Xerces-C is
faithful to the XML 1.0 recommendation and associated standards ( DOM
1.0, DOM 2.0. SAX 1.0, SAX 2.0, Namespaces).
</p>
-Des:
##----------------------------------------
=Pkg: ZynAddSubFX 2.2.1 37 i586
=Sum: A Real-Time Software Synthesizer for Linux
+Des:
<!-- DT:Rich -->
<p>ZynAddSubFX is a many-featured real-time software synthesizer for Linux. Features
include polyphony and multitimbrel and microtonal capabilities.
It includes randomness of some parameters, which can make warm sounds, like
analog synthesizers. This program has system and insertion effects, too.
</p>
-Des:
##----------------------------------------
=Pkg: a2ps 4.13 1102 i586
=Sum: Converts ASCII Text into PostScript
+Des:
<!-- DT:Rich -->
<p>a2ps converts ASCII text into PostScript. This feature is used by
apsfilter, for example, to pretty-print ASCII text.
</p>
-Des:
##----------------------------------------
=Pkg: aaa_base 10.2 38 i586
=Sum: SUSE Linux Base Package
+Del:
<!-- DT:Rich -->
<p>This package is required for proper management of your
Linux system.
</p><p>
Remove this only if you know what you are doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>This package installs several important configuration files. Central scripts
like SuSEconfig are also in this package.
</p>
-Des:
##----------------------------------------
=Pkg: aaa_skel 2006.5.19 20 i586
=Sum: Skeleton for Default Users
+Des:
<!-- DT:Rich -->
<p>This package contains the skeleton layout of a user's home directory.
</p>
-Des:
##----------------------------------------
=Pkg: aalib 1.4.0 328 i586
=Sum: An ASCII Art Library
+Des:
<!-- DT:Rich -->
<p>AA-lib is a low level gfx library.
AA-lib does not require a graphics device. In
fact, there is no graphical output possible. AA-lib replaces
old-fashioned output methods with a powerful ASCII art renderer.
</p>
-Des:
##----------------------------------------
=Pkg: aalib-devel 1.4.0 328 i586
=Sum: Development Package for AAlib
+Des:
<!-- DT:Rich -->
<p>Files needed for developing software that uses AAlib.
</p>
-Des:
##----------------------------------------
=Pkg: abiword 2.4.5 33 i586
=Sum: A Multiplatform Word Processor
+Des:
<!-- DT:Rich -->
<p>AbiWord is a multiplatform word processor with a GTK+ interface on
the UNIX platform. For extended functionality and integration, this
version is compiled with GNOME support. Abiword with the GNOME
front-end is part of the GNOME Office Suite.
</p>
-Des:
##----------------------------------------
=Pkg: acct 6.3.5 712 i586
=Sum: User-Specific Process Accounting
+Des:
<!-- DT:Rich -->
<p>This package contains the programs necessary for
user-specific process accounting: sa, accton, and lastcomm.
</p>
-Des:
##----------------------------------------
=Pkg: acl 2.2.34 33 i586
=Sum: Commands for Manipulating POSIX Access Control Lists
+Des:
<!-- DT:Rich -->
<p>getfacl and setfacl commands for retrieving and setting POSIX access control lists.
</p>
-Des:
##----------------------------------------
=Pkg: acpid 1.0.4 53 i586
=Sum: Executes Actions at ACPI Events
+Des:
<!-- DT:Rich -->
<p>ACPID is a completely flexible, totally extensible daemon for delivering ACPI
events. It listens to a file (/proc/acpi/event) and, when an event occurs,
executes programs to handle the event.
The start script loads all needed modules.
</p><p>
Configure it in /etc/sysconfig/powermanagement.
</p>
-Des:
##----------------------------------------
=Pkg: acroread 7.0.8 22 i586
=Sum: Adobe Reader for PDF Files
+Ins:
<!-- DT:Rich -->
<p>This package contains proprietary software.
</p><p>
You must remove the package if you do not accept the Adobe license agreement
that is shown before you use it for the first time and is stored in the file /usr/share/doc/packages/acroread/LICREAD.TXT.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>The Adobe Reader is proprietary binary-only software.
</p><p>
Normally Adobe Reader is used to display PDF files on the screen. For this purpose, at least the minimum graphical system must be installed (the packages that provide the RPM capability "XFree86-libs"). In this case, the command "acroread file.pdf" can be used to display a PDF file when the X Window System is up and running. For example, use "acroread /usr/X11R6/lib/Acrobat7/Reader/help/ENU/Reader.pdf" to display the Adobe Reader help.
</p><p>
The Adobe Reader can also be used as a PDF to PostScript converter. For this purpose, no graphical system is required. For example, the command "acroread -toPostScript -size a4 <file.pdf >file.ps" can be used to convert a PDF file into a PostScript file that can be sent directly to a PostScript printer. The command "acroread -help" shows the command line options.
</p><p>
Adobe Reader is often the only program able to process complicated PDF files, such as PDF forms. However, there are security leaks and other bugs that cannot be fixed because the Adobe license forbids us to "modify the Software in any way." See
Ghostscript is an alternative program for displaying and converting PDF files. It can be used with the "gv" and "kghostview" (for KDE) graphical front-ends. Additionally there is the "xpdf" package.
</p>
-Des:
##----------------------------------------
=Pkg: aeolus 0.6.6 21 i586
=Sum: Virtual Pipe Organ
+Des:
<!-- DT:Rich -->
<p>aeolus is a virtual pipe organ.
</p>
-Des:
##----------------------------------------
=Pkg: aide 0.11 30 i586
=Sum: Advanced Intrusion Detection Environment
+Des:
<!-- DT:Rich -->
<p>AIDE is an intrusion detection system that checks file integrity.
</p>
-Des:
##----------------------------------------
=Pkg: alacarte 0.10.1 25 i586
=Sum: Menu editor for GNOME
+Des:
<!-- DT:Rich -->
<p>Alacarte is a simple freedesktop.org compliant menu editor for GNOME that lets you change your menus, simply and quickly. Just click and type to edit, add, and delete any menu entry.
</p>
-Des:
##----------------------------------------
=Pkg: alevt 1.6.1 241 i586
=Sum: Teletext and Videotext Decoder for the BTTV Driver
+Des:
<!-- DT:Rich -->
<p>AleVT is a teletext and videotext decoder and browser for the
BTTV driver (/dev/vbi) and the X Window System. It features multiple windows,
a page cache, regexp searching, a built-in manual, and more.
There is also a program to get the time from teletext.
</p>
-Des:
##----------------------------------------
=Pkg: alien 8.64 22 i586
=Sum: A Perl Script to Convert Packages
+Des:
<!-- DT:Rich -->
<p>Experimental Perl script to convert software packages. The following
formats are supported: deb (Debian), rpm (Red Hat), and tgz (Slackware).
</p>
-Des:
##----------------------------------------
=Pkg: alsa 1.0.13 22 i586
=Sum: Advanced Linux Sound Architecture
+Des:
<!-- DT:Rich -->
<p>ALSA stands for Advanced Linux Sound Architecture. It supports many PCI and ISA PnP sound cards.
</p><p>
This package contains the standard ALSA library, utilities, and init scripts to start the sound system on your Linux box.
To set it up, run yast2 or alsaconf. They detect ALSA-supported PCI and ISA PnP cards.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-devel 1.0.13 22 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-plugins 1.0.12 30 i586
=Sum: Extra Plug-Ins for the ALSA Library
+Des:
<!-- DT:Rich -->
<p>This package contains the extra plug-ins for the ALSA library.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-tools 1.0.13 19 i586
=Sum: Various ALSA Tools
+Des:
<!-- DT:Rich -->
<p>Various tools for ALSA including DSP loaders.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-tools-gui 1.0.13 19 i586
=Sum: Various ALSA Tools with GUI
+Des:
<!-- DT:Rich -->
<p>Various tools for ALSA with GUI for controlling the configuration
and the mixer of sepcific sound cards.
</p>
-Des:
##----------------------------------------
=Pkg: alsamixergui 0.9.0rc1 579 i586
=Sum: An FLTK-Based Front-End for alsamixer
+Des:
<!-- DT:Rich -->
<p>AlsaMixerGui is an FLTK-based front-end for alsamixer. It is written
directly on top of the alsamixer source, so it should provide the
same functionality.
</p>
-Des:
##----------------------------------------
=Pkg: amarok 1.4.4 28 i586
=Sum: Media Player for KDE
+Des:
<!-- DT:Rich -->
<p>Amarok is a media player for all kinds of media. This includes MP3, Ogg Vorbis, audio CDs, podcasts and streams. Play lists can be stored in .m3u or .pls files.
</p>
-Des:
##----------------------------------------
=Pkg: amarok-libvisual 1.4.4 28 i586
=Sum: Visual Plugin Support for amaroK
+Des:
<!-- DT:Rich -->
<p>Visualization plugins from libvisual project can be used with amarok using this package.
</p>
-Des:
##----------------------------------------
=Pkg: amarok-xine 1.4.4 28 i586
=Sum: Xine Output Plugin for Amarok
+Des:
<!-- DT:Rich -->
<p>The Amarok media player can play via Xine using this plug-in.
</p>
-Des:
##----------------------------------------
=Pkg: amarok-xmms 1.4.4 28 i586
=Sum: XMMS Visual Plugin Support for Amarok
+Des:
<!-- DT:Rich -->
<p>Xmms visualization plugins can be used with Amarok using this package.
</p>
-Des:
##----------------------------------------
=Pkg: amavisd-new 2.4.3 15 i586
=Sum: High-Performance E-Mail Virus Scanner
+Des:
<!-- DT:Rich -->
<p>Amavisd-new is a high-performance interface between mailer (MTA) and content checkers: virus scanners or SpamAssassin. It talks to the MTA via (E)SMTP, LMTP, or by using helper programs. It works with the following MTAs:
<ul>
<li>postfix
</li><li>sendmail (sendmail-milter)
</li><li>exim
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: ami 1.2.3 134 i586
=Sum: Korean IMS (Input Method System) Ami
+Des:
<!-- DT:Rich -->
<p>Korean IMS (Input Method System) Ami. Ami uses GTK+ and supports the Window Maker dock mode.
</p>
-Des:
##----------------------------------------
=Pkg: amidic 1.2.3 134 i586
=Sum: A Hanja Dictionary for Ami, a Korean IMS
+Des:
<!-- DT:Rich -->
<p>A Hanja dictionary for Ami, a Korean IMS by Changwoo Ryu.
</p><p>
Ami uses GTK+ and supports both the GNOME applet mode and the Window Maker dock mode.
</p>
-Des:
##----------------------------------------
=Pkg: anjuta 1.2.4a 48 i586
=Sum: GNOME IDE for C and C++
+Ins:
<!-- DT:Rich -->
<p>If you want to use global tag features, you should update your global tag database by running anjuta_update_global_tags.
For more information, read /usr/share/doc/packages/anjuta/README.SuSE.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Anjuta is a versatile integrated development environment (IDE) for C and C++.
It has been written for GTK and GNOME and features a number of advanced
programming facilities. It is basically a GUI interface for the collection
of command line programming utilities and tools available for the GNU system.
These are usually run via a text console and can be unfriendly to use.
</p>
-Des:
##----------------------------------------
=Pkg: ant-commons-logging 1.6.5 44 i586
=Sum: Optional commons logging tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional commons logging tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-javamail 1.6.5 44 i586
=Sum: Optional javamail tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional javamail tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: anthy 7917 26 i586
=Sum: Kana-Kanji Conversion Engine
+Des:
<!-- DT:Rich -->
<p>Anthy (previously called 'Ancy'):
</p><p>
Canna, FreeWnn, and others are famous Kana-Kanji conversion engines
usable for Unix on PCs. They were originally developed for
Japanese Unix workstations around 1990 and development has
practically stopped. Therefore, the Heke Project is writing a free
conversion engine from scratch (apart from the dictionary, which is
developed outside of the Heke Project).
</p>
-Des:
##----------------------------------------
=Pkg: anthy-devel 7917 26 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: antivir 2.1.8.36 7 i586
=Sum: Antivir Virus Scanner
+Ins:
<!-- DT:Rich -->
<p>Please note, that the avguard init-script starting Antivir as
On-Access Virus-Scanner, is in the antivir-avguard package.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>This is the AntiVir virus scanner software package of Avira (former H+B EDV) Germany.
</p><p>
Register your copy at http://www.avira.com/ -- a license key for private, noncommercial use is free of charge.
<p>The worker MPM (multi-Processing Module) implementing a hybrid multi-threaded
multi-process web server.
</p><p>
This combination offers a performance boost and retains some of the stability
of the multi-process model.
</p>
-Des:
##----------------------------------------
=Pkg: apparmor-parser 2.0.1 11 i586
=Sum: AppArmor userlevel parser utility
+Des:
<!-- DT:Rich -->
<p>The AppArmor Parser is a userlevel program that is used to load in program
profiles to the AppArmor Security kernel module.
</p><p>
This package is part of a suite of tools that used to be named SubDomain.
</p>
-Des:
##----------------------------------------
=Pkg: aqbanking 2.2.3 21 i586
=Sum: Library for Online Banking Functions and Financial Data Import and Export
+Des:
<!-- DT:Rich -->
<p>AqBanking is a generic online banking interface. It allows multiple back-ends (currently HBCI) and multiple front-ends (such as KDE, GNOME, or console) to be used.
</p>
-Des:
##----------------------------------------
=Pkg: aqbanking-devel 2.2.3 21 i586
=Sum: Library for Online Banking Functions and Financial Data Import/Export
+Des:
<!-- DT:Rich -->
<p>AqBanking is a generic OnlineBanking interface. It allows multiple backends (currently HBCI) and multiple frontends (e.g. KDE, GNOME, console) to be used.
</p>
-Des:
##----------------------------------------
=Pkg: arcad_eval 102 10 i586
=Sum: 3D Volume Construction Program--Evaluation Version
+Des:
<!-- DT:Rich -->
<p>Evaluation only.
The ARCAD CAAD program is an extensive 3D volume construction program for
architects and planners.
The typical fields of application of ARCAD are:<ul>
<li>Construction application planning
</li><li>Construction planning
</li><li>Building planning
</li><li>Inside development planning
</li><li>Urban development planning
</li><li>Landscape planning
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: armagetron 0.2.7.1 44 i586
=Sum: OpenGL Game Similar to the Film Tron
+Des:
<!-- DT:Rich -->
<p>In this game, race against other players on a permanently moving
lightcycle (virtual motorbike), which leaves a wall as a trace.
The lightcycles can make 90 degree turns and accelerate when driven
close to walls. The game is over if you hit a wall. The goal of the game
is to try to make your enemies hit the walls, while you avoid doing the
same. Unlike glTron, this program does not require 3D hardware support.
</p>
-Des:
##----------------------------------------
=Pkg: art-sharp 1.0.10 60 i586
=Sum: Mono bindings for libart
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for libart
</p>
-Des:
##----------------------------------------
=Pkg: art-sharp2 2.8.3 33 i586
=Sum: Mono bindings for libart
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for libart.
</p>
-Des:
##----------------------------------------
=Pkg: arts 1.5.5 22 i586
=Sum: Modular Software Synthesizer
+Des:
<!-- DT:Rich -->
<p>A modular software synthesizer that generates realtime audio streams, includes midi support, is easily extendable, and uses CORBA for separation of GUI and synthesis.
</p>
-Des:
##----------------------------------------
=Pkg: arts-devel 1.5.5 22 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>A modular software synthesizer that generates realtime audio streams, supports MIDI, is easily extendable, and uses CORBA for separation of the GUI and synthesis.
</p>
-Des:
##----------------------------------------
=Pkg: aseqview 0.2.3a 34 i586
=Sum: ALSA Sequencer Event Viewer
+Des:
<!-- DT:Rich -->
<p>ASeqView is an ALSA sequencer user client that works as an event viewer
and event filter. It visualizes received events, such as note on and off,
controls, and pitch wheels, using bar graphs as seen in many sequencer
applications.
</p>
-Des:
##----------------------------------------
=Pkg: ash 1.6.1 34 i586
=Sum: The Ash Shell
+Des:
<!-- DT:Rich -->
<p>NetBSD's ash (Almquist sh) for Linux is a small (62K--no job control)
Bourne-compatible shell. It is great for machines with
low memory, but does not provide all the extras of shells like bash,
tcsh, and zsh. Most shell scripts are compatible with bash. Note
that most scripts written for Linux use some bash-specific syntax.
The Slackware setup scripts are a notable exception, because ash is the
shell used during installation.
</p>
-Des:
##----------------------------------------
=Pkg: aspell 0.60.4 23 i586
=Sum: A Free and Open Source Spell Checker
+Des:
<!-- DT:Rich -->
<p>GNU Aspell is a spell checker designed to eventually replace Ispell.
It can be used as a library or as an independent spell checker.
</p><p>
Its main feature is that it does a much better job of coming up with
possible suggestions than just about any other spell checker available
for the English language, including Ispell and Microsoft Word. It
also has many other technical enhancements over Ispell, such as using
shared memory for dictionaries and intelligently handling personal
dictionaries when more than one Aspell process is open at once.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-cs 0.60.0.20040614 11 i586
=Sum: A Czech Dictionary for Aspell
+Des:
<!-- DT:Rich -->
<p>A Czech dictionary for Aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-da 1.4.42.1 10 i586
=Sum: A Danish Dictionary for ASpell
+Des:
<!-- DT:Rich -->
<p>A Danish dictionary for the ASpell spell checker.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-de 0.60.20030222.1 10 i586
=Sum: A German Dictionary for ASpell
+Des:
<!-- DT:Rich -->
<p>A German dictionary for the ASpell spell checker.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-devel 0.60.4 23 i586
=Sum: Include Files and Libraries Mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-en 6.0 41 i586
=Sum: An English Dictionary for ASpell
+Des:
<!-- DT:Rich -->
<p>An English dictionary for the ASpell spell checker.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-es 0.50.2 376 i586
=Sum: A Spanish Dictionary for ASpell
+Des:
<!-- DT:Rich -->
<p>A Spanish dictionary for the ASpell spell checker.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-fi 0.7 42 i586
=Sum: Finnish Dictionary Package
+Des:
<!-- DT:Rich -->
<p>Finnish Dictionary Package
</p>
-Des:
##----------------------------------------
=Pkg: aspell-fr 0.50.3 376 i586
=Sum: A French Dictionary for ASpell
+Des:
<!-- DT:Rich -->
<p>A French dictionary for the ASpell spell checker.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-hu 0.99.4.2 42 i586
=Sum: An Hungarian dictionary for aspell
+Des:
<!-- DT:Rich -->
<p>An Hungarian dictionary for aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-it 2.2_20050523 42 i586
=Sum: An Italian Dictionary for Aspell
+Des:
<!-- DT:Rich -->
<p>An Italian dictionary for Aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-nb 0.50.10 49 i586
=Sum: A Norwegian Bokmaal Dictionary for Aspell
+Des:
<!-- DT:Rich -->
<p>A Norwegian Bokmaal dictionary for Aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-pl 0.51.0 63 i586
=Sum: A Polish Dictionary for Aspell
+Des:
<!-- DT:Rich -->
<p>A Polish dictionary for Aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-pt 0.50.2 376 i586
=Sum: A Portuguese Dictionary for ASpell
+Des:
<!-- DT:Rich -->
<p>A Portuguese dictionary for the ASpell spell checker.
</p>
-Des:
##----------------------------------------
=Pkg: asterisk 1.2.13 21 i586
=Sum: The Asterisk Open Source PBX
+Des:
<!-- DT:Rich -->
<p>Asterisk is a complete PBX in software. It provides all of the features you would expect from a PBX and more. Asterisk does voice over IP in three protocols and can interoperate with almost all standards-based telephony equipment using relatively inexpensive hardware.
</p><p>
Asterisk provides voicemail services with directory, call conferencing, interactive voice response, and call queuing. It has support for three-way calling, caller ID services, ADSI, SIP, and H.323 (as both client and gateway).
</p><p>
Documentation is available on the Asterisk home page (http://www.asterisk.org) and on the Asterisk wiki (http://www.voip-info.org/wiki-Asterisk).
</p>
-Des:
##----------------------------------------
=Pkg: asterisk-alsa 1.2.13 21 i586
=Sum: Soundcard Module for Asterisk
+Des:
<!-- DT:Rich -->
<p>This package allows Asterisk to use a soundcard supported by ALSA as a telephone.
</p>
-Des:
##----------------------------------------
=Pkg: asterisk-capi 0.7.1 21 i586
=Sum: ISDN Module for Asterisk
+Des:
<!-- DT:Rich -->
<p>This package allows Asterisk to receive and place calls through CAPI ISDN cards.
</p><p>
The configuration is in /etc/asterisk/capi.conf.
</p>
-Des:
##----------------------------------------
=Pkg: asterisk-odbc 1.2.13 21 i586
=Sum: Database Module for Asterisk
+Des:
<!-- DT:Rich -->
<p>This package allows Asterisk to use read configuration data from, and write call logs to ODBC databases.
</p>
-Des:
##----------------------------------------
=Pkg: asterisk-pgsql 1.2.13 21 i586
=Sum: Database Module for Asterisk
+Des:
<!-- DT:Rich -->
<p>This package allows Asterisk to use read configuration data from, and write call logs to PostgreSQL databases.
</p>
-Des:
##----------------------------------------
=Pkg: asterisk-spandsp 1.2.13 21 i586
=Sum: Softfax Module for Asterisk
+Des:
<!-- DT:Rich -->
<p>This package allows Asterisk to send/receive faxes.
</p>
-Des:
##----------------------------------------
=Pkg: asterisk-zaptel 1.2.13 21 i586
=Sum: Telephony Hardware Module for Asterisk
+Des:
<!-- DT:Rich -->
<p>This module allows Asterisk to use telephony hardware that is supported by the zaptel kernel drivers. Supported hardware ranges from FXO and FXS cards over ISDN BRI cards to T1, and E1 cards with up to four interfaces.
</p><p>
See the zaptel package for details.
</p>
-Des:
##----------------------------------------
=Pkg: at 3.1.8 944 i586
=Sum: A Job Manager
+Des:
<!-- DT:Rich -->
<p>This program allows you to run jobs at specified times.
</p>
-Des:
##----------------------------------------
=Pkg: at-spi 1.7.12 17 i586
=Sum: Assistive Technology Service Provider Interface
+Des:
<!-- DT:Rich -->
<p>This library, based on ATK, is a general interface for applications to make use of the accessibility toolkit.
</p>
-Des:
##----------------------------------------
=Pkg: at-spi-devel 1.7.12 17 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: at-spi-doc 1.7.12 17 i586
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>This package contains optional documentation provided in addition to this package's base documentation.
</p>
-Des:
##----------------------------------------
=Pkg: atk 1.12.3 15 i586
=Sum: An Accessibility ToolKit
+Des:
<!-- DT:Rich -->
<p>The ATK library provides a set of accessibility interfaces. By supporting the ATK interfaces, an application or toolkit can be used with screen readers, magnifiers, and alternate input devices.
</p>
-Des:
##----------------------------------------
=Pkg: atk-devel 1.12.3 15 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: atk-doc 1.12.3 15 i586
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>The ATK Library provides a set of interfaces for accessibility. By supporting the ATK interfaces, an application or toolkit can be used with screen readers, magnifiers, and alternate input devices.
</p>
-Des:
##----------------------------------------
=Pkg: attr 2.4.28 38 i586
=Sum: A Command to Manipulate File System Extended Attributes
+Des:
<!-- DT:Rich -->
<p>A set of tools for manipulating extended attributes on file system
objects, in particular getfattr(1) and setfattr(1).
An attr(1) command is also provided, which is largely compatible
with the SGI IRIX tool of the same name.
</p>
-Des:
##----------------------------------------
=Pkg: audacity 1.2.4b 55 i586
=Sum: A Free, Cross-Platform Digital Audio Editor
+Des:
<!-- DT:Rich -->
<p>Audacity is a program that manipulates digital audio wave forms.
In addition to recording sounds directly from within the program,
it imports many sound file formats, including WAV, AIFF, AU, IRCAM,
MP, and Ogg Vorbis. With Audacity, you can edit wave data larger than the physical
memory size of your computer.
</p>
-Des:
##----------------------------------------
=Pkg: audiofile 0.2.6 36 i586
=Sum: An Audio File Library
+Des:
<!-- DT:Rich -->
<p>This audio file library is an implementation of the SGI audio file library.
At present, not all features of the SGI audio file library are
implemented.
</p><p>
</p><p>
This library allows the processing of audio data to and from audio
files of many common formats (currently AIFF, AIFC, WAVE, and
NeXT/Sun).
</p>
-Des:
##----------------------------------------
=Pkg: audiofile-devel 0.2.6 36 i586
=Sum: An audio file library
+Des:
<!-- DT:Rich -->
<p>This Audio File Library is an implementation of the SGI Audio File library.
At present, not all features of the SGI Audio File library are
implemented.
</p><p>
</p><p>
This library allows the processing of audio data to and from audio
files of many common formats (currently AIFF, AIFC, WAVE, and
NeXT/Sun).
</p>
-Des:
##----------------------------------------
=Pkg: audit 1.2.6 20 i586
=Sum: User Space Tools for 2.6 Kernel Auditing
+Des:
<!-- DT:Rich -->
<p>The audit package contains the user space utilities
for storing and processing the audit records
generated by the audit subsystem in the Linux 2.6 kernel.
</p>
-Des:
##----------------------------------------
=Pkg: audit-devel 1.2.6 20 i586
=Sum: Header files and static library for libaudit
+Des:
<!-- DT:Rich -->
<p>The audit-devel package contains the static libraries and header
files needed for developing applications that need to use the audit
framework libraries.
</p>
-Des:
##----------------------------------------
=Pkg: audit-libs 1.2.6 20 i586
=Sum: Dynamic library for libaudit
+Des:
<!-- DT:Rich -->
<p>The audit-libs package contains the dynamic libraries needed for
applications to use the audit framework.
</p>
-Des:
##----------------------------------------
=Pkg: aumix 2.8 369 i586
=Sum: A Curses, Command Line, and X Window System-Based Mixer
+Des:
<!-- DT:Rich -->
<p>Curses-based OSS mixer.
</p>
-Des:
##----------------------------------------
=Pkg: autoconf 2.60 21 i586
=Sum: A GNU Tool for Automatically Configuring Source Code
+Des:
<!-- DT:Rich -->
<p>GNU Autoconf is a tool for configuring source code and makefiles.
Using autoconf, programmers can create portable and configurable
packages, because the person building the package is allowed to
specify various configuration options.
</p><p>
You should install autoconf if you are developing software and would
like to create shell scripts to configure your
source code packages.
</p><p>
Note that the autoconf package is not required for the end user who
may be configuring software with an autoconf-generated script;
autoconf is only required for the generation of the scripts, not
their use.
</p>
-Des:
##----------------------------------------
=Pkg: autofs 4.1.4 53 i586
=Sum: A Kernel-Based Automounter
+Des:
<!-- DT:Rich -->
<p>Autofs is a kernel-based automounter for Linux. It is still under
development, although the features currently implemented seem to work
well. There is nowhere near enough documentation available yet.
Help in getting some written would be appreciated. This package
replaces the amd package.
</p>
-Des:
##----------------------------------------
=Pkg: automake 1.9.6 35 i586
=Sum: A Program for Automatically Generating GNU-Style Makefile.in Files
+Des:
<!-- DT:Rich -->
<p>Automake is a tool for automatically generating "Makefile.in" files from
"Makefile.am" files. "Makefile.am" is a series of "make" macro definitions (with rules occasionally thrown in). The generated "Makefile.in" files are compatible with the GNU Makefile standards.
</p>
-Des:
##----------------------------------------
=Pkg: autotrace 0.31.1 405 i586
=Sum: Program for Converting Bitmaps to Vector Graphics
+Des:
<!-- DT:Rich -->
<p>AutoTrace is a program for converting bitmaps to vector graphics. The
aim of the AutoTrace project is the development of a freely-available
application similar to CorelTrace or Adobe Streamline. In some
aspects, it is already better. Originally created as a plug-in
for the GIMP, AutoTrace is now a stand-alone program and can be
compiled on any UNIX platform using GCC.
</p>
-Des:
##----------------------------------------
=Pkg: autotrace-devel 0.31.1 405 i586
=Sum: Program for converting bitmaps to vector graphics
+Des:
<!-- DT:Rich -->
<p>AutoTrace is a program for converting bitmaps to vector graphics. The
aim of the AutoTrace project is the development of a freely-available
application similar to CorelTrace or Adobe Streamline. In some
aspects it is already better. Originally being created as a plugin
for the GIMP, AutoTrace is now a standalone program and can be
compiled on any UNIX platform using GCC.
</p>
-Des:
##----------------------------------------
=Pkg: avahi 0.6.14 34 i586
=Sum: D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete, implementing all MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition, it supports some nifty things that have never been seen elsewhere, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: avahi-devel 0.6.14 34 i586
=Sum: D-BUS Service for Zeroconf/Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an Implementation the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete implementing all MUSTs and the majority of the SHOULDs of the mDNS/DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition it supports some nifty things that have never been seen elsewhere like correct mDNS reflection accross LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: avahi-glib 0.6.14 34 i586
=Sum: D-BUS Service for Zeroconf/Bonjour
+Des:
<!-- DT:Rich -->
<p>GLib support for avahi.
</p><p>
Avahi is an Implementation the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete implementing all MUSTs and the majority of the SHOULDs of the mDNS/DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition it supports some nifty things that have never been seen elsewhere like correct mDNS reflection accross LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: awesfx 0.5.0d 35 i586
=Sum: SoundFont Utilities for SB AWE32/64 and Emu10k1 Drivers
+Des:
<!-- DT:Rich -->
<p>The AWESFX package includes utility programs for controlling the wavetable
function on SB AWE32/64 and Emu10k1 sound cards.
</p>
-Des:
##----------------------------------------
=Pkg: barcode 0.98 254 i586
=Sum: Text-Mode Barcode Creation Utility
+Des:
<!-- DT:Rich -->
<p>GNU Barcode is meant to meet most barcode creation needs with a
conventional printer. It can create printouts for the conventional
product tagging standards: UPC-A, UPC-E, EAN-13, EAN-8, ISBN, as well
as a few other formats. Output is generated in either PostScript or
Encapsulated PostScript format.
</p>
-Des:
##----------------------------------------
=Pkg: bash 3.1 55 i586
=Sum: The GNU Bourne-Again Shell
+Des:
<!-- DT:Rich -->
<p>Bash is an sh-compatible command interpreter that executes commands read
from standard input or from a file. Bash incorporates useful
features from the Korn and C shells (ksh and csh). Bash is
intended to be a conformant implementation of the IEEE Posix Shell and
Tools specification (IEEE Working Group 1003.2).
</p>
-Des:
##----------------------------------------
=Pkg: bayonne2 1.5.19 29 i586
=Sum: the telephony server of the GNU project
+Des:
<!-- DT:Rich -->
<p>Bayonne offers a script programmable modular server for deploying
multi-line telephony voice response and computer telephony applications.
</p>
-Des:
##----------------------------------------
=Pkg: bayonne2-UsEng 1.5.19 29 i586
=Sum: voice library for US English Male speaker
+Des:
<!-- DT:Rich -->
<p>The US English speaker library offers default voice prompts
for the Bayonne telephony server.
</p>
-Des:
##----------------------------------------
=Pkg: bayonne2-devel 1.5.19 29 i586
=Sum: the telephony server of the GNU project
+Des:
<!-- DT:Rich -->
<p>the telephony server of the GNU project
</p>
-Des:
##----------------------------------------
=Pkg: bbtools 2006.5.26 22 i586
=Sum: Tools for the Blackbox Window Manager
+Des:
<!-- DT:Rich -->
<p>Tools for the Blackbox window manager. Includes:
Tools for the Blackbox window manager. Includes:<ol>
<li>bbmail
</li><li>bbkeys
</li><li>bbppp
</li><li>bbpager
</li><li>bbdate
</li><li>bbtime
</li><li>bbsload
</li><li>bbcd
</li><li>bbweather
</li><li>bbacpi
</li><li>bbfreq
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: bbtools-gui 2006.1.25 40 i586
=Sum: Tools for the Blackbox Window Manager with GUI Libraries
+Des:
<!-- DT:Rich -->
<p>Tools for the Blackbox window manager that require additional GUI libraries. Includes:
o bbconf
o bbrun
</p>
-Des:
##----------------------------------------
=Pkg: bc 1.06 782 i586
=Sum: GNU Command Line Calculator
+Des:
<!-- DT:Rich -->
<p>bc is an interpreter that supports numbers of arbitrary precision and
the interactive execution of statements. The syntax has some
similarities to the C programming language. A standard
math library is available through command line options. When used, the
math library is read in before any other input files. bc then reads
in all other files from the command line, evaluating their contents.
Then bc reads from standard input (usually the keyboard).
</p><p>
The dc program is also included. dc is a calculator that supports
reverse-polish notation and allows unlimited precision arithmetic.
Macros can also be defined. Normally, dc reads from standard input but
can also read in files specified on the command line. A calculator with
reverse-polish notation saves numbers to a stack. Arguments to
mathematical operations (operands) are "pushed" onto the stack until the
next operator is read in, which "pops" its arguments off the stack and
"pushes" its results back onto the stack.
</p>
-Des:
##----------------------------------------
=Pkg: bcm43xx-fwcutter 005 14 i586
=Sum: Tool for extracting firmware from Broadcom WLAN drivers
+Des:
<!-- DT:Rich -->
<p>bcm43xx-fwcutter can be used to extract firmware from Windows WLAN drivers for Broadcom bcm43xx devices. The firmware is necessary to run such a card under Linux using the bcm43xx driver.
</p>
-Des:
##----------------------------------------
=Pkg: bdfresize 1.5 445 i586
=Sum: A Tool for Resizing BDF Format Fonts
+Des:
<!-- DT:Rich -->
<p>bdfresize is a command for magnifying or shrinking fonts described
in the standard BDF format.
</p>
-Des:
##----------------------------------------
=Pkg: beagle 0.2.12 28 i586
=Sum: Desktop Search Application
+Des:
<!-- DT:Rich -->
<p>Beagle is a search tool that ransacks your personal information space to find whatever you are looking for. Beagle can search in many different domains including:
Beagle is a search tool that ransacks your personal information space to find whatever you are looking for. Beagle can search in many different domains including:<ul>
<li>Documents
</li><li>E-mails
</li><li>Web browsing history
</li><li>IM and IRC conversations
</li><li>Source code
</li><li>Images
</li><li>Music files
</li><li>Applications
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: beagle-evolution 0.2.12 28 i586
=Sum: Desktop search application
+Des:
<!-- DT:Rich -->
<p>Beagle is a search tool that ransacks your personal information space to find whatever you are looking for. Beagle can search in many different domains:
Beagle is a search tool that ransacks your personal information space to find whatever you are looking for. Beagle can search in many different domains:<ul>
<li>documents
</li><li>e-mails
</li><li>web browsing history
</li><li>IM and IRC conversations
</li><li>source code
</li><li>images
</li><li>music files
</li><li>applications
</li><li>and much more
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: beagle-firefox 0.2.12 28 i586
=Sum: Desktop search application
+Des:
<!-- DT:Rich -->
<p>Beagle is a search tool that ransacks your personal information space to find whatever you are looking for. Beagle can search in many different domains:
Beagle is a search tool that ransacks your personal information space to find whatever you are looking for. Beagle can search in many different domains:<ul>
<li>documents
</li><li>e-mails
</li><li>web browsing history
</li><li>IM and IRC conversations
</li><li>source code
</li><li>images
</li><li>music files
</li><li>applications
</li><li>and much more
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: beagle-gui 0.2.12 28 i586
=Sum: Desktop Search Application
+Des:
<!-- DT:Rich -->
<p>Beagle is a search tool that ransacks your personal information space to find whatever you are looking for. Beagle can search in many different domains:
Beagle is a search tool that ransacks your personal information space to find whatever you are looking for. Beagle can search in many different domains:<ul>
<li>documents
</li><li>e-mails
</li><li>web browsing history
</li><li>IM and IRC conversations
</li><li>source code
</li><li>images
</li><li>music files
</li><li>applications
</li><li>and much more
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: beagle-index 10.2_20061101 31 i586
=Sum: Global Beagle Index
+Des:
<!-- DT:Rich -->
<p>An index of default installed files for use by beagle.
</p><p>
This saves time when beagle indexes later by merging indexed data for packages into the main system index.
</p>
-Des:
##----------------------------------------
=Pkg: bibview 2.2 842 i586
=Sum: X11 Front-End for BibTeX Databases
+Des:
<!-- DT:Rich -->
<p>Using bibview, entries in several BiB databases can be moved, manipulated, created, and searched.
</p><p>
If you prefer German rather than English menus, copy the file
var/X11R6/lib/app-defaults/BibView.ger to var/X11R6/lib/app-defaults/BibView.
</p>
-Des:
##----------------------------------------
=Pkg: bin86 0.16.0 218 i586
=Sum: An 8086 Assembler and Linker
+Des:
<!-- DT:Rich -->
<p>An 8086 assembler and linker.
</p>
-Des:
##----------------------------------------
=Pkg: bind 9.3.2 47 i586
=Sum: Domain Name System (DNS) Server (named)
+Des:
<!-- DT:Rich -->
<p>Berkeley Internet Name Domain (BIND) is an implementation of the Domain Name System (DNS) protocols and provides an openly redistributable reference implementation of the major components of the Domain Name System. This package includes the components to operate a DNS server.
</p>
-Des:
##----------------------------------------
=Pkg: bind-chrootenv 9.3.2 47 i586
=Sum: Chroot environment for BIND named and lwresd
+Des:
<!-- DT:Rich -->
<p>This package contains all directories and files which are common to the chroot environment of BIND named and lwresd. Most is part of the structure below /var/lib/named.
</p>
-Des:
##----------------------------------------
=Pkg: bind-doc 9.3.2 47 i586
=Sum: BIND documentation
+Des:
<!-- DT:Rich -->
<p>Documentation of the Berkeley Internet Name Domain (BIND) Domain Name System implementation of the Domain Name System (DNS) protocols. This includes also the BIND Administrator Reference Manual (ARM).
</p>
-Des:
##----------------------------------------
=Pkg: bind-libs 9.3.2 47 i586
=Sum: Shared libraries of BIND
+Des:
<!-- DT:Rich -->
<p>This package contains the shared libraries of the Berkeley Internet Name Domain (BIND) Domain Name System implementation of the Domain Name System (DNS) protocols.
</p>
-Des:
##----------------------------------------
=Pkg: bind-utils 9.3.2 47 i586
=Sum: Utilities to query and test DNS
+Des:
<!-- DT:Rich -->
<p>This package includes the utilities host, dig, and nslookup used to test and
query the Domain Name System (DNS). The Berkeley Internet Name Domain (BIND) DNS server is found in the package named bind.
</p>
-Des:
##----------------------------------------
=Pkg: bing 1.0.5 31 i586
=Sum: A Point-to-Point Bandwidth Measurement Tool
+Des:
<!-- DT:Rich -->
<p>Bing determines the real (raw, as opposed to available or average)
throughput of a link by measuring ICMP echo request round trip times
for different packet sizes for each end of the link.
</p>
-Des:
##----------------------------------------
=Pkg: binutils 2.17.50.0.5 21 i586
=Sum: GNU Binutils
+Des:
<!-- DT:Rich -->
<p>C compiler utilities: ar, as, gprof, ld, nm,
objcopy, objdump, ranlib, size, strings, and strip.
These utilities are needed whenever you want to
compile a program or kernel.
</p>
-Des:
##----------------------------------------
=Pkg: bison 2.3 21 i586
=Sum: The GNU Parser Generator
+Des:
<!-- DT:Rich -->
<p>Bison is a parser generator similar to yacc(1).
</p>
-Des:
##----------------------------------------
=Pkg: bitchx 1.1 40 i586
=Sum: An IRC Client
+Ins:
<!-- DT:Rich -->
<p>ATTENTION: This program contains coarse words that might offend some people.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>BitchX is one of the most well-known IRC clients for the text console. It originated
from ircii.
It offers a lot of possibilities and settings.
</p>
-Des:
##----------------------------------------
=Pkg: blackbox 0.70.1 33 i586
=Sum: A Window Manager with the X Window System as the Only Dependency
+Des:
<!-- DT:Rich -->
<p>Blackbox is a small, fast, and stable window manager.
</p><p>
Start it by typing
</p><p>
startx blackbox
</p><p>
It is recommended that bbtools and bbtools-gui (if you have libqt and libgtk)
be installed together with this package.
</p>
-Des:
##----------------------------------------
=Pkg: blam 1.8.2 66 i586
=Sum: GNOME/GTK# RSS Aggregator
+Des:
<!-- DT:Rich -->
<p>Blam is a tool that helps you keep track of the growing number of news feeds distributed as RSS. Blam lets you subscribe to any number of feeds and provides an easy-to-use and clean interface to stay up-to-date.
</p>
-Des:
##----------------------------------------
=Pkg: blender 2.42a 24 i586
=Sum: 3D Animation and Rendering Software
+Des:
<!-- DT:Rich -->
<p>Blender is the open source software for 3D modeling, animation, rendering, post-production, interactive creation and playback. Available for all major operating systems under the GNU General Public License.
</p>
-Des:
##----------------------------------------
=Pkg: blocxx 1.0.0 36 i586
=Sum: BloCXX--C++ Framework for Application Development
+Des:
<!-- DT:Rich -->
<p>BloCXX is a general C++ framework for application development. This package contains the BloCXX library.
</p>
-Des:
##----------------------------------------
=Pkg: blocxx-devel 1.0.0 36 i586
=Sum: BloCXX - Include Files and Libraries
+Des:
<!-- DT:Rich -->
<p>BloCXX is a general C++ framework for application development.
</p><p>
This package contains include files and libraries required
for development.
</p>
-Des:
##----------------------------------------
=Pkg: blt 2.4z 243 i586
=Sum: Tcl/Tk Extension
+Des:
<!-- DT:Rich -->
<p>BLT is an extension to the Tk toolkit, adding new widgets, geometry managers, and miscellaneous commands.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-cups 3.7 29 i586
=Sum: CUPS Driver for Bluetooth Printers
+Des:
<!-- DT:Rich -->
<p>Contains the files required by CUPS for printing to Bluetooth-connected printers.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-firmware 1.2 20 i586
=Sum: Bluetooth(TM) Firmware
+Des:
<!-- DT:Rich -->
<p>Bluetooth(TM) Firmware.
Package contains firmware images for some Bluetooth(TM) adapters.
Currently supported are:<ul>
<li>Broadcom Corporation BCM2033
</li><li>AVM Computersysteme Vertriebs GmbH BLUEFRITZ! USB
</li></ul>
The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., USA.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-gnome 0.6 7 i586
=Sum: Bluetooth helpers for GNOME
+Des:
<!-- DT:Rich -->
<p>Bluetooth helpers for GNOME
</p>
-Des:
##----------------------------------------
=Pkg: bluez-hcidump 1.33 8 i586
=Sum: HCI Dumper for Debugging Bluetooth Connections
+Des:
<!-- DT:Rich -->
<p>An HCI dumper for debugging Bluetooth connections for BlueZ.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-libs 3.7 14 i586
=Sum: Bluetooth Libraries
+Des:
<!-- DT:Rich -->
<p>Bluetooth protocol stack libraries.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-test 3.7 29 i586
=Sum: Tools for testing of various Bluetooth-functions
+Des:
<!-- DT:Rich -->
<p>Contains a few tools for testing various bluetooth functions.
The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., U.S.A.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-utils 3.7 29 i586
=Sum: Bluetooth Daemons and Utilities
+Des:
<!-- DT:Rich -->
<p>This package contains daemons and utilities for using Bluetooth.
The package provides daemons for various services and the basic control and configuration of Bluetooth devices. Miscellaneous utilities are included for handling Bluetooth connections.
</p><p>
The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., USA.
</p>
-Des:
##----------------------------------------
=Pkg: bmp 0.9.7.1 43 i586
=Sum: Beep Media Player
+Des:
<!-- DT:Rich -->
<p>Beep Media Player (BMP) is a GTK2 port of the popular X Multimedia
System (XMMS) and more.
</p>
-Des:
##----------------------------------------
=Pkg: bmp-devel 0.9.7.1 43 i586
=Sum: Beep Media Player
+Des:
<!-- DT:Rich -->
<p>Beep Media Player (BMP) is a GTK2 port of the popular X Multimedia
System (XMMS) and more.
</p>
-Des:
##----------------------------------------
=Pkg: bogofilter 1.1.1 20 i586
=Sum: Fast Anti-Spam Filtering by Bayesian Statistical Analysis
+Des:
<!-- DT:Rich -->
<p>Bogofilter is a Bayesian spam filter. In normal operation, it takes an e-mail message or text from standard input, does a statistical check against lists of "good" and "bad" words, and returns a status code indicating whether the message is spam. Bogofilter is designed with fast algorithms (including the Berkeley DB system), coded directly in C, and tuned for speed, so it can be used for production by sites that process a lot of mail.
</p>
-Des:
##----------------------------------------
=Pkg: bonnie++ 1.02 367 i586
=Sum: A Bonnie-Like File System Benchmark
+Des:
<!-- DT:Rich -->
<p>Bonnie++ is a benchmark suite aimed at performing a number of simple hard drive and file system performance tests.
</p>
-Des:
##----------------------------------------
=Pkg: bonnie 1.4 371 i586
=Sum: File System Benchmark
+Des:
<!-- DT:Rich -->
<p>Bonnie is a popular performance benchmark that targets various aspects of
Unix file systems.
</p>
-Des:
##----------------------------------------
=Pkg: boost 1.33.1 42 i586
=Sum: Boost C++ Libraries
+Des:
<!-- DT:Rich -->
<p>Boost provides free peer-reviewed portable C++ source
libraries. The emphasis is on libraries that work well with the C++
Standard Library. One goal is to establish "existing practice" and
provide reference implementations so that the Boost libraries are
suitable for eventual standardization. Some of the libraries have
already been proposed for inclusion in the C++ Standards Committee's
upcoming C++ Standard Library Technical Report.
</p><p>
Although Boost was begun by members of the C++ Standards Committee
Library Working Group, membership has expanded to include nearly two
thousand members of the C++ community at large.
</p><p>
This package contains the dynamic libraries. For development using Boost, you
also need the boost-devel package. For documentation, see the boost-doc package.
</p>
-Des:
##----------------------------------------
=Pkg: boost-devel 1.33.1 42 i586
=Sum: Development package for Boost C++
+Des:
<!-- DT:Rich -->
<p>This package contains all that is needed to develop/compile applications that
use the Boost C++ libraries. For documentation see the package boost-doc.
</p>
-Des:
##----------------------------------------
=Pkg: bootsplash 3.3 38 i586
=Sum: Graphical System Boot Utilities
+Des:
<!-- DT:Rich -->
<p>The bootsplash package contains utilities and scripts for displaying graphics, animations, or text when the system boots. To use bootsplash, you also need
a bootsplash theme that contains pictures and configuration files. Find information about bootsplash at http://www.bootsplash.org/.
</p>
-Des:
##----------------------------------------
=Pkg: bootsplash-theme-SuSE 3.1 94 i586
=Sum: Default SUSE Bootsplash Theme
+Des:
<!-- DT:Rich -->
<p>This package contains the default theme for SUSE's graphical boot.
Find more information at http://www.bootsplash.org/.
</p>
-Des:
##----------------------------------------
=Pkg: bridge-utils 1.2 12 i586
=Sum: Utilities for Configuring the Linux Ethernet Bridge
+Des:
<!-- DT:Rich -->
<p>This package contains utilities for configuring the Linux ethernet
bridge. The Linux ethernet bridge can be used for connecting multiple
ethernet devices together. The connection is fully transparent: hosts
connected to one ethernet device see hosts connected to the other
ethernet devices directly.
</p><p>
Authors:
<hr>
Lennert Buytenhek <buytenh@gnu.org>
</p>
-Des:
##----------------------------------------
=Pkg: briquolo 0.5.3 46 i586
=Sum: 3D Action Breakout with Explosions and Other Effects
+Des:
<!-- DT:Rich -->
<p>Briquolo features an appealing and scenic 3D view of where the
action takes place. The combination of different fullscreen views and
stunning audio/visual power-up effects ties the player to the
virtual scenery of this revamped version of Breakout.
</p>
-Des:
##----------------------------------------
=Pkg: bsd-games 2.13 386 i586
=Sum: Several Text-Mode Games
+Des:
<!-- DT:Rich -->
<p>This package copies these games into /usr/games:
<p>Bug Buddy for the GNOME 2.x Desktop. Its purpose is to make bug reporting for end-users as easy as possible. It can generate crash backtraces and include that information with the bug report.
</p>
-Des:
##----------------------------------------
=Pkg: busybox 1.2.1 20 i586
=Sum: The Swiss Army Knife of Embedded Linux
+Des:
<!-- DT:Rich -->
<p>BusyBox combines tiny versions of many common UNIX utilities into
a small single executable. It provides minimalist replacements for
most of the utilities usually found in fileutils, shellutils,
findutils, textutils, grep, gzip, tar, and more. BusyBox provides a
fairly complete POSIX environment for any small or embedded system.
The utilities in BusyBox generally have fewer options than their
full-featured GNU cousins. The options that are included
provide the expected functionality and behave very much like their
GNU counterparts.
</p>
-Des:
##----------------------------------------
=Pkg: bytefx-data-mysql 1.1.18.1 12 i586
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: bzflag 2.0.8 22 i586
=Sum: 3D Networked Multiplayer Tank Battle Game
+Des:
<!-- DT:Rich -->
<p>BZFlag is a 3D multiplayer tank battle game that allows users to play
against each other in a networked environment. Because it makes heavy use
of 3D graphics (OpenGL), a fast CPU or a supported 3D video card is
heavily recommended.
</p><p>
Find server maps in /usr/share/games/bzflag/maps.
</p>
-Des:
##----------------------------------------
=Pkg: bzip2 1.0.3 36 i586
=Sum: A Program for Compressing Files
+Des:
<!-- DT:Rich -->
<p>bzip is a very powerful program for compressing files.
</p>
-Des:
##----------------------------------------
=Pkg: cabextract 1.2 16 i586
=Sum: A Program to Extract Microsoft Cabinet Files
+Des:
<!-- DT:Rich -->
<p>Cabinet (.CAB) files are a form of archive, which Microsoft uses to
distribute their software and things like Windows Font Packs.
cabextract can be used to unpack these files.
</p>
-Des:
##----------------------------------------
=Pkg: cairo 1.2.4 8 i586
=Sum: Vector Graphics Library with Cross-Device Output Support
+Des:
<!-- DT:Rich -->
<p>Cairo is a vector graphics library with cross-device output support. Currently supported output targets include the X Window System, in-memory image buffers, and PostScript. Cairo is designed to produce identical output on all output media while taking advantage of display hardware acceleration when available.
</p>
-Des:
##----------------------------------------
=Pkg: cairo-devel 1.2.4 8 i586
=Sum: Development environment for cairo
+Des:
<!-- DT:Rich -->
<p>This package contains all files necessary to build binaries using cairo.
</p>
-Des:
##----------------------------------------
=Pkg: cairomm 1.2.2 18 i586
=Sum: C++ Interface for Cairo
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for Cairo.
</p>
-Des:
##----------------------------------------
=Pkg: cairomm-devel 1.2.2 18 i586
=Sum: C++ interface for Cairo
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for Cairo.
</p>
-Des:
##----------------------------------------
=Pkg: calamaris 2.59 33 i586
=Sum: A Report Generator
+Des:
<!-- DT:Rich -->
<p>Calamaris parses log files from Squid V1.1.x, V1.2.x, V2.x, and NetCache
in native log format and generates a report. It is written in Perl 5.
</p>
-Des:
##----------------------------------------
=Pkg: canna 3.7p3 44 i586
=Sum: Kana and Kanji Conversion System
+Des:
<!-- DT:Rich -->
<p>Canna converts Kana to Kanji based on a client/server model.
An application program communicates with a Kana to Kanji conversion
server to achieve Japanese input. Canna can be used in Emacs, X
Window System environments, and on TTYs. Canna provides more than ten tools to
maintain Kana to Kanji conversion dictionaries.
</p>
-Des:
##----------------------------------------
=Pkg: canna-devel 3.7p3 44 i586
=Sum: Libraries of Canna
+Des:
<!-- DT:Rich -->
<p>Canna libraries.
</p>
-Des:
##----------------------------------------
=Pkg: canna-libs 3.7p3 44 i586
=Sum: Canna Libraries
+Des:
<!-- DT:Rich -->
<p>Canna Libraries
</p>
-Des:
##----------------------------------------
=Pkg: canna-yubin 0.0.20011101 390 i586
=Sum: Postal Code Extension Dictionary for Canna
+Des:
<!-- DT:Rich -->
<p>A postal code extension dictionary for Canna.
</p>
-Des:
##----------------------------------------
=Pkg: cannadic 0.95a 77 i586
=Sum: Extension Dictionary for Canna
+Des:
<!-- DT:Rich -->
<p>This dictionary has been compiled as a supplement to the dictionaries
distributed with Canna3.5b2. It is based on Kana-Kanji conversion
dictionaries distributed under the GPL and Kana-Kanji conversion distributed
without restrictions. While using this dictionary, many missing
words have been successively added. Currently the main dictionary and the
suffix and prefix dictionary together contain about 130,000 words.
</p>
-Des:
##----------------------------------------
=Pkg: capi4linux 2006.11.14 6 i586
=Sum: CAPI 2.0 library and associated tools
+Des:
<!-- DT:Rich -->
<p>This package contains the CAPI 2.0 library, which is needed for all CAPI applications. It also contains programs to show information about installed CAPI controllers and for the receiving and sending of FAX messages.
CAPI 2.0 drivers for Linux are available for a growing number
of ISDN devices.
</p>
-Des:
##----------------------------------------
=Pkg: capisuite 0.4.5 45 i586
=Sum: ISDN Telecommunication Suite Providing Fax and Voice Services
+Des:
<!-- DT:Rich -->
<p>CapiSuite is an ISDN telecommunication suite providing easy to use
telecommunication functions that can be controlled from Python scripts.
It uses a CAPI-compatible driver for accessing the ISDN hardware, so
requires an AVM card with the appropriate driver.
</p><p>
CapiSuite is distributed with two example scripts for incoming call handling
and fax sending. See /usr/share/doc/packages/capisuite for further information.
</p>
-Des:
##----------------------------------------
=Pkg: ccache 2.4 34 i586
=Sum: Compiler Cache
+Des:
<!-- DT:Rich -->
<p>Ccache is a compiler cache. It acts as a caching preprocessor to C/C++
compilers, using the -E compiler switch and a hash to detect when
a compilation can be satisfied from cache. This often results in
increased speed for common compilations.
</p>
-Des:
##----------------------------------------
=Pkg: ccaudio2 0.9.9 21 i586
=Sum: a C++ class framework for processing audio files
+Des:
<!-- DT:Rich -->
<p>The GNU ccAudio2 package offers a highly portable C++ class framework for
developing applications which manipulate audio streams and various
disk based audio file formats. At the moment ccaudio is primarily a class
framework for handling .au, .wav (RIFF), and various .raw audio encoding
formats under Posix and win32 systems, though it may expand to become a
general purpose audio and soundcard support library. Support for
controlling CD audio devices has recently been added as well as support
for codecs and other generic audio processing services.
</p>
-Des:
##----------------------------------------
=Pkg: ccaudio2-devel 0.9.9 21 i586
=Sum: Include-files and documentation for ccaudio
+Des:
<!-- DT:Rich -->
<p>This package contains include files and documentation for developing applications with ccaudio.
</p>
-Des:
##----------------------------------------
=Pkg: ccrtp 1.5.0 16 i586
=Sum: A Common C++ Class Framework for RTP Packets
+Des:
<!-- DT:Rich -->
<p>The ccrtp package offers a generic framework for sending and receiving
real-time streaming data over UDP packets using sending and receiving
packet queues.
</p>
-Des:
##----------------------------------------
=Pkg: ccscript3 1.0.9 21 i586
=Sum: a GNU Common C++ framework for embedded scripting
+Des:
<!-- DT:Rich -->
<p>The GNU ccScript package offers a class extensible threaded embedded
scripting engine for use with GNU Common C++. This engine is also used in
GNU Bayonne (the GNU telephony application server package) and other
parts of GNUCOMM (the GNU telephony meta-project). This engine differs
from traditional scripting systems in that it is used to script near
real-time state-event systems through deterministic callback step
execution rather than the linear and non-deterministic fashion of embedded
script systems such as tcl, libguile, etc.
</p>
-Des:
##----------------------------------------
=Pkg: ccscript3-devel 1.0.9 21 i586
=Sum: Header files and documentation for ccscript
+Des:
<!-- DT:Rich -->
<p>This package contains header files and documentation needed when developing
applications with ccscript.
</p>
-Des:
##----------------------------------------
=Pkg: cdda2wav cdrkit.1.0pre5 6 i586
=Sum: A CD-Audio Grabbing tool
+Des:
<!-- DT:Rich -->
<p>The common CD-audio grabbing tool for Linux. The sources are now contained in
the wodim source archive.
</p>
-Des:
##----------------------------------------
=Pkg: cdk 4.9.13 33 i586
=Sum: The Runtime for the Curses Development Kit
+Des:
<!-- DT:Rich -->
<p>CDK is a widget set developed on top of the basic curses
library. It contains 21 ready to use widgets, some of which
are: a text entry field, a scrolling list, a selection list,
an alphalist, a pull-down menu, a radio list, a viewer widget,
and a dialog box.
</p>
-Des:
##----------------------------------------
=Pkg: cdparanoia IIIalpha9.8 584 i586
=Sum: A Program for Extracting, Verifying, and Fixing Audio Tracks from CDs
+Des:
<!-- DT:Rich -->
<p>This CDDA reader distribution ('cdparanoia') reads audio from the
CD-ROM directly as data and writes the
data to a file or pipe as .wav, .aifc, or raw 16-bit linear PCM.
</p><p>
This is a beta release. See http://www.xiph.org/paranoia/.
</p>
-Des:
##----------------------------------------
=Pkg: cdrdao 1.2.2 23 i586
=Sum: Write CD-Rs in Disk-At-Once Mode
+Des:
<!-- DT:Rich -->
<p>CDRDAO creates CD-Rs in disk-at-once (DAO) mode
driven by a description file called a toc file. In DAO mode,
it is possible to create nonstandard track pregaps that
have lengths other than 2 seconds and contain nonzero
audio data. This is useful for dividing live
recordings into tracks where 2 second gaps would be
irritating.
</p>
-Des:
##----------------------------------------
=Pkg: chasen 2.3.3 129 i586
=Sum: Japanese Morphological Analysis System
+Des:
<!-- DT:Rich -->
<p>Japanese Morphological Analysis System, ChaSen
</p><p>
</p><p>
ChaSen version 1.0 was officially released on 19 February, 1997 by
the Computational Linguistics Laboratory, the Graduate School of Information
Science, and the Nara Institute of Science and Technology (NAIST). It is a
free Japanese Morphological analyser. It grew out of JUMAN
version 2.0 development and has made significant improvements in system
performance.
Origin of Package Name:
</p><p>
</p><p>
Takayama, Nara (where NAIST is situated) is famous for producing a tea
whisk used in traditional Japanese tea ceremonies. The Japanese name for
the tea whisk is "chasen" and that is the reason for giving the name
ChaSen to this package developed in NAIST.
</p>
-Des:
##----------------------------------------
=Pkg: chasen-devel 2.3.3 129 i586
=Sum: Libraries and header files for ChaSen developers
+Des:
<!-- DT:Rich -->
<p>Libraries and header files for ChaSen developers.
</p>
-Des:
##----------------------------------------
=Pkg: check 0.9.3 34 i586
=Sum: Unit Test Framework for C
+Des:
<!-- DT:Rich -->
<p>Check is a unit test framework for C. It features a simple interface
for defining unit tests, putting little in the way of the
developer. Tests are run in a separate address space, so Check can
catch both assertion failures and code errors that cause segmentation
faults or other signals. The output from unit tests can be used within
source code editors and IDEs.
</p>
-Des:
##----------------------------------------
=Pkg: checkinstall 1.6.0 34 i586
=Sum: "make install" Installation Tracker
+Des:
<!-- DT:Rich -->
<p>Uses installwatch to keep track of all files created or modified
during the run of an installation script like "make install".
The information is used to create a rpm package that holds all
files installed by the tracked installation. This makes it possible,
for example, to remove all files later with rpm -e package or to install
the package on another system.
</p>
-Des:
##----------------------------------------
=Pkg: checkmedia 2.1 35 i586
=Sum: Check Installation Media
+Des:
<!-- DT:Rich -->
<p>Checks installation CDs and DVDs for errors.
</p>
-Des:
##----------------------------------------
=Pkg: chkrootkit 0.47 7 i586
=Sum: Used to Check for Symptoms of Installed Root Kits
+Des:
<!-- DT:Rich -->
<p>This is a set of tools that detect rootkit (a program that hides the presence of attackers) symptoms on a system.
</p><p>
Rootkits can hide using kernel modules, but they always leave some small traces that can be detected with this program.
However, it is always recommended that this program be used from a rescue system or a system with a similar purpose.
</p>
-Des:
##----------------------------------------
=Pkg: chromium 0.9.12 1042 i586
=Sum: Vertical Scrolling Space Shooter Game
+Des:
<!-- DT:Rich -->
<p>Chromium B.S.U.
is a fast-paced, arcade-style, top-scrolling space shooter.
</p>
-Des:
##----------------------------------------
=Pkg: cifs-mount 3.0.23d 6 i586
=Sum: mount using the Common Internet File System (CIFS)
+Des:
<!-- DT:Rich -->
<p>mount.cifs mounts a CIFS filesystem. It is usually invoked indirectly by the mount command when using the "-t cifs" option.
</p>
-Des:
##----------------------------------------
=Pkg: circuslinux 1.0.3 1060 i586
=Sum: A Clone of the Atari 2600 Game "Circus Atari"
+Des:
<!-- DT:Rich -->
<p>The object is to move a teeter-totter back and forth across the screen
to bounce clowns into the air. When they reach the top, they pop
rows of balloons, then fall back down.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex 4.5.2 244 i586
=Sum: LaTeX Macro Package for CJK (Chinese/Japanese/Korean)
+Des:
<!-- DT:Rich -->
<p>CJK LaTeX is a macro package for LaTeX to enable typesetting Chinese,
Japanese, and Korean. It supports (simultaneously) various CJK
encodings, such as Big5, GB, JIS, KS, and CNS.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-han-300 4.5.2 244 i586
=Sum: 300 DPI Bitmaps for Hangul Syllables (in KS order) for CJK LaTeX
+Des:
<!-- DT:Rich -->
<p>300 DPI bitmap fonts for Hangul syllables (in KS order) for CJK
LaTeX. These are from various fonts taken from the former HLaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-han-tfmvf 4.5.2 244 i586
=Sum: TeX Font Metric Data for the Hangul Fonts for CJK-LaTeX
+Des:
<!-- DT:Rich -->
<p>TeX font metric data for the Hangul fonts for CJK-LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-han1-300 4.5.2 244 i586
=Sum: 300 DPI Bitmaps for Hangul Syllables (in KS order) for CJK-LaTeX
+Des:
<!-- DT:Rich -->
<p>300 DPI bitmap fonts for Hangul syllables (in KS order) for CJK-LaTeX.
These are from various fonts taken from the former jhTeX.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-han1-600 4.5.2 244 i586
=Sum: 600 DPI Bitmaps for Hangul Syllables (in KS order) for CJK-LaTeX
+Des:
<!-- DT:Rich -->
<p>600 DPI bitmap fonts for Hangul syllables (in KS order) for CJK-LaTeX.
These are from various fonts taken from the former jhTeX.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-han1-tfmvf 4.5.2 244 i586
=Sum: TeX Font Metric Data for the Han1 fonts (Hangul) for CJK-LaTeX
+Des:
<!-- DT:Rich -->
<p>TeX font metric data for the Han1 fonts (Hangul) for CJK-LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-cns40-1 4.5.2 244 i586
=Sum: Chinese Bitmap Font for CJK LaTeX. CNS Plane 1. Song Style
+Des:
<!-- DT:Rich -->
<p>Chinese bitmap font for CJK-LaTeX. CNS encoded font plane 1. Song style.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-cns40-2 4.5.2 244 i586
=Sum: Chinese Bitmap Font for CJK-LaTeX. CNS Plane 2. Song Style
+Des:
<!-- DT:Rich -->
<p>Chinese bitmap font for CJK-LaTeX. CNS plane 2. Song style.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-cns40-3 4.5.2 244 i586
=Sum: Chinese Bitmap Font for CJK-LaTeX. CNS Plane 3. Song Style
+Des:
<!-- DT:Rich -->
<p>Chinese bitmap font for CJK-LaTeX. CNS encoded font plane 3. Song style.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-cns40-4 4.5.2 244 i586
=Sum: Chinese Bitmap Font for CJK-LaTeX. CNS Plane 4. Song Style
+Des:
<!-- DT:Rich -->
<p>Chinese bitmap font for CJK-LaTeX. CNS encoded font plane 4. Song style.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-cns40-5 4.5.2 244 i586
=Sum: Chinese Bitmap Font for CJK-LaTeX. CNS Plane 5. Song Style
+Des:
<!-- DT:Rich -->
<p>Chinese bitmap font for CJK-LaTeX. CNS plane 5. Song style.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-cns40-6 4.5.2 244 i586
=Sum: Chinese Bitmap Font for CJK-LaTeX. CNS Plane 6. Song Style
+Des:
<!-- DT:Rich -->
<p>Chinese bitmap font for CJK-LaTeX. CNS encoded font plane 6. Song style.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-cns40-7 4.5.2 244 i586
=Sum: Chinese Bitmap Font for CJK-LaTeX. CNS Plane 7. Song Style
+Des:
<!-- DT:Rich -->
<p>Chinese bitmap font for CJK-LaTeX. CNS plane 7. Song style.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-cns40-b5 4.5.2 244 i586
=Sum: Chinese Bitmap Font for CJK-LaTeX. Big 5 Encoded CNS Font
+Des:
<!-- DT:Rich -->
<p>Chinese bitmap font for CJK-LaTeX. Big 5 encoded CNS font.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-hanja65 4.5.2 244 i586
=Sum: KS Bitmap Font Starting with Character 0x4a21 for CJK-LaTeX
+Des:
<!-- DT:Rich -->
<p>A bitmap KS font (taken from the new HLateX package) starting with
character 0x4a21. It contains a Korean Hanja bitmap file (*no*
Hangul!) together with its HBF header file, an hbf2gf configuration
file, and .tfm files to be used with the CJK package for LaTeX2e.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-jfs56 4.5.2 244 i586
=Sum: Chinese Bitmap Font for CJK-LaTeX. GB Encoded. Fangsong Style
+Des:
<!-- DT:Rich -->
<p>Chinese bitmap font for CJK-LaTeX. GB encoded. Fangsong style.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-jisksp40 4.5.2 244 i586
=Sum: Japanese JIS X 0212 Bitmap Font for CJK-LaTeX. Normal Style
+Des:
<!-- DT:Rich -->
<p>Japanese bitmap font for CJK-LaTeX. Contains the characters from the
JIS X 0212-1990 supplemental Japanese character set standard, normal
style. Most glyphs are taken from the CNS fonts, thus the font is
song style (the BDF header says "normal").
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-hbf-kanji48 4.5.2 244 i586
=Sum: Japanese Bitmap Font for CJK-LaTeX. JIS Encoded. Normal Style
+Des:
<!-- DT:Rich -->
<p>Japanese bitmap font for CJK-LaTeX. JIS encoded. Normal style.
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-wadalab-gothic 4.5.2 244 i586
=Sum: Japanese PS fonts "Wadalab Gothic" for CJK-LaTeX (JIS X 0208)
+Des:
<!-- DT:Rich -->
<p>Japanese Postscript fonts "Wadalab Gothic" for CJK-LaTeX (JIS X 0208).
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-wadalab-maru 4.5.2 244 i586
=Sum: Japanese PS fonts "Wadalab Maru" for CJK-LaTeX (JIS X 0208)
+Des:
<!-- DT:Rich -->
<p>Japanese Postscript fonts "Wadalab Maru" for CJK-LaTeX (JIS X 0208).
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-wadalab-maru2 4.5.2 244 i586
=Sum: Japanese PS fonts "Wadalab Maru" for CJK-LaTeX (JIS X 0212)
+Des:
<!-- DT:Rich -->
<p>Japanese Postscript fonts "Wadalab Maru" for CJK-LaTeX (JIS X 0212).
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-wadalab-mincho 4.5.2 244 i586
=Sum: Japanese PS fonts "Wadalab Mincho" for CJK-LaTeX (JIS X 0208)
+Des:
<!-- DT:Rich -->
<p>Japanese Postscript fonts "Wadalab Mincho" for CJK-LaTeX (JIS X 0208).
</p>
-Des:
##----------------------------------------
=Pkg: cjk-latex-wadalab-mincho2 4.5.2 244 i586
=Sum: Japanese PS fonts "Wadalab Mincho" for CJK-LaTeX (JIS X 0212)
+Des:
<!-- DT:Rich -->
<p>Japanese Postscript fonts "Wadalab Mincho" for CJK-LaTeX (JIS X 0212).
</p>
-Des:
##----------------------------------------
=Pkg: cjk-lyx 1.3.6 40 i586
=Sum: A CJK Version of a LaTeX-Based WYSIWYG Editor
+Des:
<!-- DT:Rich -->
<p>CJK-LyX is a version of LyX suitable for Chinese, Japanese and Korean.
LyX is a front-end for LaTeX under the X Window System. It combines the comfortable use
of a word processor with the high quality of LaTeX typesetting.
Documents are displayed in a WYSIWYG-like way.
The user does not choose low level attributes ("large italic") but high level
layouts (styles) for each paragraph. Of course, low level formatting is
still possible.
</p>
-Des:
##----------------------------------------
=Pkg: ckermit 8.0.211 39 i586
=Sum: A Combined Serial and Network Communication Software Package
+Des:
<!-- DT:Rich -->
<p>C-Kermit is a combined serial and network communication software package
offering a consistent, medium-independent, and cross-platform approach to
translation, and automation of communication tasks.
</p>
-Des:
##----------------------------------------
=Pkg: clamav 0.88.6 9 i586
=Sum: Antivirus Toolkit
+Des:
<!-- DT:Rich -->
<p>Clam AntiVirus is an antivirus toolkit for UNIX.
The main purpose of this software is the integration with mail servers (attachment scanning). The package provides a flexible and scalable multithreaded daemon, a command line scanner, and a tool for automatic updating via the Internet. It can be used in conjunction with AMaViSD-new and Postfix to provide a combined e-mail filter for spam and viruses.
</p>
-Des:
##----------------------------------------
=Pkg: clanbomber 1.05 43 i586
=Sum: A Bomberman or Dynablaster Clone
+Des:
<!-- DT:Rich -->
<p>ClanBomber is a very nice Bomberman-like and Dynablaster-like game. It has multiplayer
support (8 players), but no network support yet.
</p>
-Des:
##----------------------------------------
=Pkg: clanlib 0.6.5 389 i586
=Sum: A Portable Interface for Writing Games
+Des:
<!-- DT:Rich -->
<p>ClanLib delivers a platform-independent interface for writing games.
</p>
-Des:
##----------------------------------------
=Pkg: classpath 0.92 20 i586
=Sum: GNU implementation of the essential libraries for Java
+Des:
<!-- DT:Rich -->
<p>GNU Classpath, Essential Libraries for Java, is a GNU project to create free core class libraries for use with virtual machines and compilers for the java programming language.
Classpath is still a work in progress.
</p>
-Des:
##----------------------------------------
=Pkg: clisp 2.39 17 i586
=Sum: A Common Lisp Interpreter
+Des:
<!-- DT:Rich -->
<p>Common Lisp is a high-level, all-purpose programming language. CLISP
is an implementation of Common Lisp that closely follows the book
"Common Lisp - The Language" by Guy L. Steele Jr. This package includes an
interactive programming environment with an interpreter, a compiler, and
a debugger. Start this environment with the command 'clisp'.
</p><p>
CLISP documentation is placed in the following directories:
</p><p>
/usr/share/doc/packages/clisp/
</p><p>
/usr/share/doc/packages/clisp/doc/
</p><p>
As well as the conventional CLISP, this package also includes CLX,
an extension of CLISP for the X Window System.
The X Window System must be installed before running the clx command.
The description of this CLX version (new-clx) is placed in
<p>Utilities to create and read cloop image files.
</p>
-Des:
##----------------------------------------
=Pkg: cmake 2.4.3 27 i586
=Sum: Cross-platform, open-source make system
+Des:
<!-- DT:Rich -->
<p>CMake is a cross-platform, open-source make system
</p>
-Des:
##----------------------------------------
=Pkg: cmatrix 1.2a 298 i586
=Sum: The Console Screensaver in Accordance with Matrix
+Des:
<!-- DT:Rich -->
<p>The console screensaver in accordance with Matrix.
</p>
-Des:
##----------------------------------------
=Pkg: comgt 0.32 9 i586
=Sum: A scriptable terminal program.
+Des:
<!-- DT:Rich -->
<p>Comgt is a terminal program with an own script language. Especially designed (with default scripts) to work with nearly all Option 2G and 3G (UMTS) datacards and help you integrate them into Linux.
</p>
-Des:
##----------------------------------------
=Pkg: commoncpp2 1.4.2 22 i586
=Sum: A GNU package for creating portable C++ program
+Des:
<!-- DT:Rich -->
<p>Common C++ is a GNU package which offers portable "abstraction" of system
services such as threads, networks, and sockets. Common C++ also offers
individual frameworks generally useful to developing portable C++
applications including a object persistance engine, math libraries,
threading, sockets, etc. Common C++ is small, and highly portable.
Common C++ will support most Unix operating systems as well
as Win32, in addition to GNU/Linux.
</p>
-Des:
##----------------------------------------
=Pkg: commoncpp2-devel 1.4.2 22 i586
=Sum: Files for developing CommonC++ applications
+Des:
<!-- DT:Rich -->
<p>This package contains include files, static libraries and some documentation
for the CommonC++ package. It is needed for developing and compiling CommonC++
applications.
</p>
-Des:
##----------------------------------------
=Pkg: commoncpp2-doc 1.4.2 22 i586
=Sum: A GNU package for creating portable C++ program
+Des:
<!-- DT:Rich -->
<p>Common C++ is a GNU package which offers portable "abstraction" of system
services such as threads, networks, and sockets. Common C++ also offers
individual frameworks generally useful to developing portable C++
applications including a object persistance engine, math libraries,
threading, sockets, etc. Common C++ is small, and highly portable.
Common C++ will support most Unix operating systems as well
libstdc++.so.2.8, libstdc++.so.2.9, and libstdc++-3-libc6.1-2-2.10.0.so
(from the old sources).
</p>
-Des:
##----------------------------------------
=Pkg: compat-curl2 7.11.0 39 i586
=Sum: Curl Compatibility Library
+Des:
<!-- DT:Rich -->
<p>Curl is a client to get documents and files from or send documents
to a server using any of the supported protocols
(HTTP, HTTPS, FTP, GOPHER, DICT, TELNET, LDAP, or FILE).
This package contains an older version of the curl library for binary compatibility with old binaries.
</p>
-Des:
##----------------------------------------
=Pkg: compat-expat1 1.95.8 26 i586
=Sum: XML Parser Toolkit
+Des:
<!-- DT:Rich -->
<p>Expat is an XML 1.0 parser written in C. It aims to be fully
conformant. It is currently not a validating XML processor. The current
production version of expat can be downloaded from
ftp://ftp.jclark.com/pub/xml/expat.zip.
The directory xmltok contains a low-level library for tokenizing
XML. The interface is documented in xmltok/xmltok.h.
The directory xmlparse contains an XML parser library that is built on
top of the xmltok library. The interface is documented in
xmlparse/xmlparse.h. The directory sample contains a simple example
program using this interface. The directory sample/build.bat is a batch file to build
the example using Visual C++.
The directory xmlwf contains the xmlwf application, which uses the
xmlparse library. The arguments to xmlwf are one or more files to
check for well-formedness. An option -d dir can be
specified. For each well-formed input file, the corresponding canonical
XML is written to dir/f, where f is the filename (without any path)
of the input file. A -x option causes references to external general
entities to be processed. A -s option makes documents that are not
stand-alone cause an error (a document is considered stand-alone if
it is intrinsically stand-alone because it has no external subset and no
references to parameter entities in the internal subset or it is
declared as stand-alone in the XML declaration).
</p>
-Des:
##----------------------------------------
=Pkg: compat-libstdc++ 5.0.7 41 i586
=Sum: The Old stdc++ Library
+Des:
<!-- DT:Rich -->
<p>The standard C++ library, needed for dynamically linked C++ programs.
</p><p>
This package includes an older version for compatibility reasons.
</p>
-Des:
##----------------------------------------
=Pkg: compat-openssl097g 0.9.7g 33 i586
=Sum: Secure Sockets and Transport Layer Security
+Des:
<!-- DT:Rich -->
<p>The OpenSSL Project is a collaborative effort to develop a robust,
commercial-grade, full-featured, and Open Source toolkit implementing
the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS
v1) protocols with full-strength cryptography world-wide. The project
is managed by a worldwide community of volunteers that use the
Internet to communicate, plan, and develop the OpenSSL toolkit and its
related documentation.
</p><p>
</p><p>
Derivation and License
</p><p>
</p><p>
OpenSSL is based on the excellent SSLeay library developed from Eric
A. Young and Tim J. Hudson. The OpenSSL toolkit is licensed under a
Apache-style licence which basically means that you are free to get
and use it for commercial and non-commercial purposes.
</p>
-Des:
##----------------------------------------
=Pkg: compat-readline4 4.3 33 i586
=Sum: The Old readline Library 4.3
+Des:
<!-- DT:Rich -->
<p>The readline library is used by the Bourne Again shell (Bash, the
standard comand interpreter) for easy editing of command lines. This
includes history and search functionality.
</p><p>
This package includes an older version for compatibility reasons.
</p>
-Des:
##----------------------------------------
=Pkg: compiz 0.2.2 18 i586
=Sum: OpenGL window and compositing manager.
+Des:
<!-- DT:Rich -->
<p>Compiz is an OpenGL compositing manager that use GLX_EXT_texture_from_drawable
for binding redirected top-level windows to texture objects. It has a flexible plug-in system and it is designed to run well on most graphics hardware.
</p>
-Des:
##----------------------------------------
=Pkg: compiz-gnome 0.2.2 18 i586
=Sum: OpenGL window and compositing manager configuration utilities
+Des:
<!-- DT:Rich -->
<p>This package contains configuration utilities for the Compiz compositing manager.
</p>
-Des:
##----------------------------------------
=Pkg: conglomerate 0.9.1 48 i586
=Sum: XML Editor for GNOME
+Des:
<!-- DT:Rich -->
<p>Conglomerate is a user-friendly XML editor for DocBook and other document types. It aims to hide the complexity and jargon of XML behind a friendly GUI.
</p>
-Des:
##----------------------------------------
=Pkg: contact-lookup-applet 0.13 51 i586
=Sum: Evolution Address Book Search Applet
+Des:
<!-- DT:Rich -->
<p>This applet allows you to search for people in your Evolution 2 address book.
</p><p>
To use, simply add it to your panel (Add to Panel -> Accessories -> Address book Lookup), type a name into the field, and hit [Enter] or Search.
</p>
-Des:
##----------------------------------------
=Pkg: control-center2 2.16.1 28 i586
=Sum: The GNOME Control Center for the GNOME 2.x Desktop
+Des:
<!-- DT:Rich -->
<p>This package contains the control center for the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: convert 1.3 835 i586
=Sum: Unit Conversion
+Des:
<!-- DT:Rich -->
<p>Convert is software for converting units from one type to another (over 700 conversions).
</p>
-Des:
##----------------------------------------
=Pkg: coreutils 6.4 10 i586
=Sum: GNU Core Utilities
+Del:
<!-- DT:Rich -->
<p>This package is required for proper management of your Linux system.
</p><p>
Replace only if you know what you are doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Basic file, shell, and text manipulation utilities. The package contains the following programs:
</p><p>
basename cat chgrp chmod chown chroot cksum comm cp csplit cut date dd
df dir dircolors dirname du echo env expand expr factor false fmt fold
install groups head id join kill link ln logname ls md5sum mkdir mkfifo
readlink rm rmdir seq sha1sum shred sleep sort split stat stty su sum sync tac tail tee test touch tr true tsort tty uname unexpand uniq unlink uptime
users vdir wc who whoami yes
</p>
-Des:
##----------------------------------------
=Pkg: cpio 2.6 40 i586
=Sum: A Backup and Archiving Utility
+Des:
<!-- DT:Rich -->
<p>This is GNU cpio, a program to manage archives of files. This package
also includes 'mt', a tape drive control program. Cpio copies files into
or out of a cpio or tar archive. An archive is a file that contains other
files plus information about them, such as their pathname, owner,
time stamps, and access permissions.
The archive can be another file on the disk, a magnetic tape, or a pipe.
</p><p>
This package normally includes the program 'rmt', which provides
remote tape drive control. Because there is a compatible 'rmt' in the
'dump' package, 'rmt' is not included in this package. If you are planning
to use the remote tape features provided by cpio, install the
'dump' package as well.
</p>
-Des:
##----------------------------------------
=Pkg: cpp 4.1.3 29 i586
=Sum: The system GNU Preprocessor
+Des:
<!-- DT:Rich -->
<p>The system GNU Preprocessor.
</p>
-Des:
##----------------------------------------
=Pkg: cpp41 4.1.2_20061115 5 i586
=Sum: The GCC Preprocessor
+Des:
<!-- DT:Rich -->
<p>This Package contains just the preprocessor that is used
by the X11 packages.
</p>
-Des:
##----------------------------------------
=Pkg: cpufrequtils 002 27 i586
=Sum: Tools to Determine and Set CPUfreq Settings
+Des:
<!-- DT:Rich -->
<p>To make access to the Linux kernel cpufreq subsystem easier for users and cpufreq userspace tools, the cpufrequtils package was created. It contains a library used by other programs (libcpufreq), command line tools to determine current CPUfreq settings and to modify them (cpufreq-info and cpufreq-set), and debug tools.
</p>
-Des:
##----------------------------------------
=Pkg: cracklib 2.8.9 20 i586
=Sum: A Password-Checking Library
+Des:
<!-- DT:Rich -->
<p>CrackLib tests passwords to determine whether they match certain
security-oriented characteristics. You can use CrackLib to stop
users from choosing passwords that are easy to guess.
</p>
-Des:
##----------------------------------------
=Pkg: crafty 20.1 30 i586
=Sum: A Chess Program
+Des:
<!-- DT:Rich -->
<p>A strong playing chess program. It uses opening books and endgame databases.
The graphical interface (xcrafty) requires the xboard package.
</p>
-Des:
##----------------------------------------
=Pkg: cron 4.1 68 i586
=Sum: cron Daemon
+Des:
<!-- DT:Rich -->
<p>cron automatically starts programs at specific times.
Add new entries with "crontab -e".
(See "man 5 crontab" and "man 1 crontab" for documentation.)
</p><p>
Under /etc, find the directories cron.hourly, cron.daily,
cron.weekly, and cron.monthly. Scripts and programs that are located
there are started automatically.
</p>
-Des:
##----------------------------------------
=Pkg: cscope 15.6 13 i586
=Sum: Interactive Tool for Browsing C Source Code
+Des:
<!-- DT:Rich -->
<p>Cscope is an interactive, screen-oriented tool that allows the user to
browse through C source code files for specified elements of code.
</p>
-Des:
##----------------------------------------
=Pkg: csmash 0.6.6 43 i586
=Sum: 3D Table Tennis Game
+Des:
<!-- DT:Rich -->
<p>CannonSmash is a 3D table tennis game. The goal of this project is to
represent various table tennis strategies in a computer game.
</p>
-Des:
##----------------------------------------
=Pkg: csound 4.24.1 255 i586
=Sum: Computer Sound Synthesis and Composition Program
+Des:
<!-- DT:Rich -->
<p>Csound is a software synthesis program. It is fully
modular and supports an unlimited amount of oscillators
and filters.
</p><p>
For detailed information, refer to
http://www.csounds.com.
</p>
-Des:
##----------------------------------------
=Pkg: ctags 2006.5.31 20 i586
=Sum: A Program to Generate Tag Files for Use with vi and Other Editors
+Des:
<!-- DT:Rich -->
<p>CTags (from Darren Hiebert) generates tag files from source code in C,
C++, Eiffel, Fortran, and Java to be used with vi and its derivatives, Emacs,
and several other editors.
</p><p>
ETags (from GNU Emacs sources) generates tag files from source code in Pascal, Cobol, Ada, Perl, LaTeX, Scheme, Emacs Lisp/Common Lisp, Postscript,
Erlang, Python, Prolog, and most assembler-like syntaxes.
</p>
-Des:
##----------------------------------------
=Pkg: cups 1.2.7 3 i586
=Sum: The Common UNIX Printing System
+Des:
<!-- DT:Rich -->
<p>The Common UNIX Printing System provides a portable printing layer for
UNIX® operating systems like BSD lp or lprng. CUPS provides some additional
features.
</p><p>
http://www.cups.org
</p>
-Des:
##----------------------------------------
=Pkg: cups-backends 1.0 43 i586
=Sum: Various Free Backends for the cups Package
+Des:
<!-- DT:Rich -->
<p>This package contains free additional backends for CUPS.
</p>
-Des:
##----------------------------------------
=Pkg: cups-client 1.2.7 3 i586
=Sum: CUPS Client Programs
+Des:
<!-- DT:Rich -->
<p>The Common UNIX Printing System provides a portable printing layer for
UNIX® operating systems like BSD lp or lprng. CUPS provides some additional
features.
This package contains all programs needed for running a CUPS client, not a server.
</p>
-Des:
##----------------------------------------
=Pkg: cups-devel 1.2.7 3 i586
=Sum: Development Environment for CUPS
+Des:
<!-- DT:Rich -->
<p>The Common UNIX Printing System provides a portable printing layer for
UNIX® operating systems like BSD lp or lprng. CUPS provides some additional
features.
This is the development package.
</p><p>
http://www.cups.org
</p>
-Des:
##----------------------------------------
=Pkg: cups-drivers 1.2.7 7 i586
=Sum: Drivers for the Common UNIX Printing System
+Des:
<!-- DT:Rich -->
<p>This package contains free printer driver descriptions for
CUPS. It contains a recent snapshot of the printer database
from http://www.linuxprinting.org.
</p>
-Des:
##----------------------------------------
=Pkg: cups-libs 1.2.7 3 i586
=Sum: libraries for CUPS
+Des:
<!-- DT:Rich -->
<p>The Common UNIX Printing System provides a portable printing layer for
UNIX® operating systems like BSD lp or lprng. CUPS provides some additional
features.
This package contains libraries needed by CUPS and some other packages.
</p>
-Des:
##----------------------------------------
=Pkg: curl 7.15.5 23 i586
=Sum: A Tool for Transferring Data from URLs
+Des:
<!-- DT:Rich -->
<p>Curl is a client to get documents and files from or send documents
to a server using any of the supported protocols
(HTTP, HTTPS, FTP, GOPHER, DICT, TELNET, LDAP, or FILE).
The command is designed to work without user interaction
or any kind of interactivity.
</p>
-Des:
##----------------------------------------
=Pkg: curl-devel 7.15.5 23 i586
=Sum: Header Files and Libraries for cURL Development
+Des:
<!-- DT:Rich -->
<p>This package provides the header files and libraries for cURL development.
</p>
-Des:
##----------------------------------------
=Pkg: cvs 1.12.12 39 i586
=Sum: Concurrent Versions System
+Des:
<!-- DT:Rich -->
<p>CVS is a front-end to the Revision Control System
included in the standard Linux distributions.
PCL-CVS, an Emacs front-end for CVS, is also included.
</p>
-Des:
##----------------------------------------
=Pkg: cvs-doc 1.12.12 39 i586
=Sum: Open Source Development with CVS, 2nd Edition Book
+Des:
<!-- DT:Rich -->
<p>The complete Open Source Development with CVS, 2nd Edition book.
</p>
-Des:
##----------------------------------------
=Pkg: cvs2svn 1.4.0 23 i586
=Sum: Converts CVS repositories to Subversion repositories
+Des:
<!-- DT:Rich -->
<p>Converts CVS repositories to Subversion repositories.
</p><p>
See /usr/share/doc/packages/cvs2svn directory for more information.
</p>
-Des:
##----------------------------------------
=Pkg: cvsps 2.1 32 i586
=Sum: A Program for Generating Patch Set Information from a CVS Repository
+Des:
<!-- DT:Rich -->
<p>CVSps is a program for generating 'patchset' information from a CVS
repository. In this case, a patchset is defined as a set of changes
made to a collection of files, all committed at the same time
(using a single 'cvs commit' command). This information is valuable for
seeing the big picture of the evolution of a CVS project. While CVS
tracks revision information, it is often difficult to see what changes
were 'atomically' committed to the repository.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-imapd 2.2.13 24 i586
=Sum: An IMAP and POP Mail Server
+Des:
<!-- DT:Rich -->
<p>The Cyrus IMAP server.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl 2.1.22 28 i586
=Sum: Implementation of Cyrus SASL API
+Des:
<!-- DT:Rich -->
<p>This is the Cyrus SASL API. It can be used on the client
or server side to provide authentication. See RFC 2222 for more
information.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-crammd5 2.1.22 28 i586
=Sum: cyrus-sasl plugin for the CRAMMD5 mechanism
+Des:
<!-- DT:Rich -->
<p>This is the Cyrus SASL API implementation. It can be used on the client
or server side to provide authentication. See RFC 2222 for more
information.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-devel 2.1.22 28 i586
=Sum: Cyrus SASL API Implementation, Libraries and Header Files
+Des:
<!-- DT:Rich -->
<p>This is the Cyrus SASL API. It can be used on the client
or server side to provide authentication. See RFC 2222 for more
information.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-digestmd5 2.1.22 28 i586
=Sum: cyrus-sasl plugin for the DIGESTMD5 mechanism
+Des:
<!-- DT:Rich -->
<p>This is the Cyrus SASL API implementation. It can be used on the client
or server side to provide authentication. See RFC 2222 for more
information.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-gssapi 2.1.22 28 i586
=Sum: cyrus-sasl plugin for the GSSAPI mechanism
+Des:
<!-- DT:Rich -->
<p>This is the Cyrus SASL API implementation. It can be used on the client
or server side to provide authentication. See RFC 2222 for more
information.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-otp 2.1.22 28 i586
=Sum: cyrus-sasl plugin for the OTP mechanism
+Des:
<!-- DT:Rich -->
<p>This is the Cyrus SASL API implementation. It can be used on the client
or server side to provide authentication. See RFC 2222 for more
information.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-plain 2.1.22 28 i586
=Sum: cyrus-sasl plugin for the PLAIN mechanism
+Des:
<!-- DT:Rich -->
<p>This is the Cyrus SASL API implementation. It can be used on the client
or server side to provide authentication. See RFC 2222 for more
information.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-saslauthd 2.1.22 27 i586
=Sum: The SASL Authentication Server
+Des:
<!-- DT:Rich -->
<p>This daemon is required when using cyrus-sasl in server software that should, for example, authenticate with PAM.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-sqlauxprop 2.1.22 27 i586
=Sum: cyrus-sasl SQL auxprop plugin
+Des:
<!-- DT:Rich -->
<p>The SQL auxprop plugin supports PostgreSQL and MySQL
</p>
-Des:
##----------------------------------------
=Pkg: dante 1.1.19 29 i586
=Sum: A Free Socks v4 and v5 Client Implementation
+Des:
<!-- DT:Rich -->
<p>Dante is a free implementation of the following proxy protocols: socks version 4,
socks version 5 (rfc1928), and msproxy. It can be used as a firewall
between networks. It is being developed by Inferno Nettverk A/S, a
Norwegian consulting company. Commercial support is available.
</p><p>
This package contains the dynamic libraries required to make
existing applications become socks clients.
</p>
-Des:
##----------------------------------------
=Pkg: dante-devel 1.1.19 29 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: dar 2.2.5 25 i586
=Sum: Backup and Restore Application
+Des:
<!-- DT:Rich -->
<p>Dar stands for disk archive and is a hardware-independent backup solution. Dar uses catalogs (unlike tar), so it is possible to extract a single file without having to read the entire archive. It is also possible to create incremental backups.
</p><p>
Dar archives can also be created or used with the libdar library (for example, with KDar, a KDE application).
</p><p>
This package contains the command line tools and documentation.
</p>
-Des:
##----------------------------------------
=Pkg: darts 0.2 124 i586
=Sum: Double Array Trie System
+Des:
<!-- DT:Rich -->
<p>Double array trie system.
</p>
-Des:
##----------------------------------------
=Pkg: dasher 4.2.0 28 i586
=Sum: Zooming Predictive Text Entry System
+Des:
<!-- DT:Rich -->
<p>Dasher is a zooming predictive text entry system, designed for situations
where keyboard input is impractical (for instance: accessibility or PDAs). It
is usable with greatly limited amounts of physical input while still allowing
high rates of text entry.
</p>
-Des:
##----------------------------------------
=Pkg: datakiosk 0.7 45 i586
=Sum: JuK-Like Database Interface Tool
+Des:
<!-- DT:Rich -->
<p>datakiosk can be used to generate searches or for generating reports from existing SQL databases.
</p>
-Des:
##----------------------------------------
=Pkg: dazuko 2.3.1 7 i586
=Sum: On-access virus scanning kernel interface
+Des:
<!-- DT:Rich -->
<p>The dazuko package contains the boot script loading / unloading the
dazuko on-access virus scanning kernel interface module provided by
the dazuko-KMP kernel module packages.
</p>
-Des:
##----------------------------------------
=Pkg: dazuko-kmp-bigsmp 2.3.1_2.6.18.2_34 7 i586
=Sum: On-access virus scanning kernel interface
+Ins:
<!-- DT:Rich -->
<p>Please note, that Dazuko currently may not work together with AppArmor.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>The dazuko-KMP package contains the on-access virus scanning
kernel interface module.
</p>
-Des:
##----------------------------------------
=Pkg: dazuko-kmp-default 2.3.1_2.6.18.2_34 7 i586
=Sum: On-access virus scanning kernel interface
+Ins:
<!-- DT:Rich -->
<p>Please note, that Dazuko currently may not work together with AppArmor.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>The dazuko-KMP package contains the on-access virus scanning
kernel interface module.
</p>
-Des:
##----------------------------------------
=Pkg: dazuko-kmp-xen 2.3.1_2.6.18.2_34 7 i586
=Sum: On-access virus scanning kernel interface
+Ins:
<!-- DT:Rich -->
<p>Please note, that Dazuko currently may not work together with AppArmor.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>The dazuko-KMP package contains the on-access virus scanning
kernel interface module.
</p>
-Des:
##----------------------------------------
=Pkg: db 4.4.20 16 i586
=Sum: Berkeley DB Database Library
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the necessary runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: db-devel 4.4.20 16 i586
=Sum: Include Files and Libraries for the Berkeley DB library
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the header files, libraries, and documentation for
building programs which use Berkeley DB.
</p>
-Des:
##----------------------------------------
=Pkg: db-utils 4.4.20 16 i586
=Sum: Command Line tools for Managing Berkeley DB Databases
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the command line tools for managing Berkeley DB databases.
</p>
-Des:
##----------------------------------------
=Pkg: db1 1.85 119 i586
=Sum: Berkeley DB Database Library Version 1.85
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the necessary runtime libraries for the old 1.85 release.
</p>
-Des:
##----------------------------------------
=Pkg: db41 4.1.25 109 i586
=Sum: Berkeley DB Database Library Version 4.1
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the necessary runtime libraries for the old 4.1 release.
</p>
-Des:
##----------------------------------------
=Pkg: db41-devel 4.1.25 109 i586
=Sum: Development Include Files and Libraries for the old Berkeley DB library Version 4.1
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the header files, libraries, and documentation for
building programs which need the old Berkeley DB version 4.1. If possible
programs should be converted to work with the new Berkeley DB version,
version 4.1 will be removed in a future release.
</p>
-Des:
##----------------------------------------
=Pkg: db42 4.2.52 38 i586
=Sum: Berkeley DB Database Library Version 4.2
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the necessary runtime libraries for the old 4.2 release.
</p>
-Des:
##----------------------------------------
=Pkg: db42-devel 4.2.52 38 i586
=Sum: Berkeley DB database library Version 4.2
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the necessary runtime libraries for the old 4.2 release.
</p>
-Des:
##----------------------------------------
=Pkg: db43 4.3.29 18 i586
=Sum: Berkeley DB Database Library
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the necessary runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: dbench 3.04 32 i586
=Sum: File System Benchmark Similar to Netbench
+Des:
<!-- DT:Rich -->
<p>Dbench is a file system benchmark that generates load patterns similar to those of the commercial Netbench benchmark, but without requiring a lab of Windows load generators to run. It is now considered a de facto standard for generating load on the Linux VFS.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1 1.0.0 7 i586
=Sum: D-Bus Message Bus System
+Des:
<!-- DT:Rich -->
<p>D-Bus is a message bus system, a simple way for applications to talk to one another. D-Bus supplies both a system daemon and a per-user-login-session daemon. Also, the message bus is built on top of a general one-to-one message passing framework, which can be used by any two apps to communicate directly (without going through the message bus daemon).
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-devel 1.0.0 7 i586
=Sum: Developer package for D-Bus
+Des:
<!-- DT:Rich -->
<p>D-Bus is a message bus system, a simple way for applications to talk to one another. D-Bus supplies both a system daemon and a per-user-login-session daemon. Also, the message bus is built on top of a general one-to-one message passing framework, which can be used by any two apps to communicate directly (without going through the message bus daemon).
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-glib 0.71 26 i586
=Sum: GLib-based library for using D-Bus
+Des:
<!-- DT:Rich -->
<p>D-Bus add-on library to integrate the standard D-Bus library with the GLib
thread abstraction and main loop.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-glib-devel 0.71 26 i586
=Sum: Developer package for D-BUS/GLib bindings
+Des:
<!-- DT:Rich -->
<p>D-Bus add-on library to integrate the standard D-Bus library with the GLib
thread abstraction and main loop.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-mono 0.63 28 i586
=Sum: Mono Bindings for D-Bus
+Des:
<!-- DT:Rich -->
<p>Mono bindings for D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-python 0.71 28 i586
=Sum: Python bindings for D-Bus
+Des:
<!-- DT:Rich -->
<p>Python bindings for D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-qt3 0.62 38 i586
=Sum: QT3/KDE bindings for D-Bus
+Des:
<!-- DT:Rich -->
<p>QT3/KDE bindings for D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-qt3-devel 0.62 38 i586
=Sum: Developer package for QT3/KDE bindings for D-Bus
+Des:
<!-- DT:Rich -->
<p>Developer package for QT3/KDE bindings for D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-x11 1.0.0 7 i586
=Sum: X11-requiring add-ons for D-Bus
+Des:
<!-- DT:Rich -->
<p>D-Bus contains some tools that require Xlib to be installed, those are
in this separate package so server systems need not install X.
</p>
-Des:
##----------------------------------------
=Pkg: dcraw 1.353 12 i586
=Sum: Raw Digital Photo Decoding
+Des:
<!-- DT:Rich -->
<p>Command line tools for raw digital photo decoding and processing.
</p>
-Des:
##----------------------------------------
=Pkg: ddd 3.3.11 44 i586
=Sum: Debugger with Graphical User Interface
+Des:
<!-- DT:Rich -->
<p>The DDD debugger (Data Display Debugger) is a comfortable GUI to the
well-known debuggers GDB and DBX. Data structures can be represented as
graphs and shown interactively. Programs can be debugged in C, C++,
Pascal, MODULA-2, FORTRAN, ADA, and even at the assembler code level.
</p>
-Des:
##----------------------------------------
=Pkg: ddrescue 1.12_0.0.6 22 i586
=Sum: Data Copying in the Presence of I/O Errors
+Des:
<!-- DT:Rich -->
<p>dd_rescue helps when nothing else can:
your disk has crashed and you try to copy it over to another one.
While standard Unix tools like cp, cat, and dd wail "abort" on every I/O error,
dd_rescue does not.
</p>
-Des:
##----------------------------------------
=Pkg: deb 1.10.27 41 i586
=Sum: Tools for Debian Packages
+Des:
<!-- DT:Rich -->
<p>This package contains tools for working with Debian packages. It makes it possible to create and extract Debian packages. If Alien is installed, the packages can be converted to RPMs.
</p><p>
This package contains the following Debian packages: dpkg, dselect, dpkg-doc, dpkg-dev, and debhelper.
</p>
-Des:
##----------------------------------------
=Pkg: dejagnu 1.4.4 35 i586
=Sum: Framework for Running Test Suites on Software Tools
+Des:
<!-- DT:Rich -->
<p>DejaGnu is a framework for testing other programs. Its purpose is to
provide a single front-end for all tests. Beyond this, DejaGnu offers
several advantages for testing:
<ol>
<li>The flexibility and consistency of the DejaGnu framework make it easy to write tests for any program.
</li><li>DejaGnu provides a layer of abstraction that allows you to write tests that are portable to any host or target where a program must be tested. For instance, a test for GDB can run (from any Unix-based host) on any target architecture that DejaGnu supports.
</li><li>All tests have the same output format. This makes it easy to integrate testing into other software development processes. DejaGnu's output is designed to be parsed by other filtering scripts and it is also human-readable.
</li></ol>
DejaGnu is written in <a href="pkg://expect">expect</a>, which in turn uses "Tcl"--Tool
command language.
</p><p>
Running tests requires two things: the testing framework and the
test suites themselves.
</p>
-Des:
##----------------------------------------
=Pkg: delta 2005.09.13 30 i586
=Sum: Minimize files to interesting parts
+Des:
<!-- DT:Rich -->
<p>Delta assists you in minimizing "interesting" files subject to a test
of their interestingness. A common such situation is when attempting
to isolate a small failure-inducing substring of a large input that
causes your program to exhibit a bug. Please see /usr/share/doc/packages/delta/www/using_delta.html for documentation.
</p>
-Des:
##----------------------------------------
=Pkg: deltarpm 3.3 31 i586
=Sum: Tools to Create and Apply deltarpms
+Des:
<!-- DT:Rich -->
<p>This package contains tools to create and apply deltarpms. A deltarpm contains the difference between an old and a new version of an RPM, which makes it
possible to recreate the new RPM from the deltarpm and the old one. You do not
need to have a copy of the old RPM, because deltarpms can also work with installed
RPMs.
</p>
-Des:
##----------------------------------------
=Pkg: deskbar-applet 2.16.1 8 i586
=Sum: Deskbar applet for GNOME
+Des:
<!-- DT:Rich -->
<p>The goal of DeskbarApplet is to provide an omnipresent versatile search interface. By typing search terms into the deskbar entry in your panel you are presented with the search results as you type.
</p><p>
Seaches are handled by a series of plugins. DeskbarApplet provides a simple interface to manage these plugins to provide you with the search results that fit your needs.
</p>
-Des:
##----------------------------------------
=Pkg: desktop-file-utils 0.11 10 i586
=Sum: Utilities for Manipulating Desktop Files
+Des:
<!-- DT:Rich -->
<p>Desktop-file-utils contains a couple of command line utilities for
working with desktop entries.
</p><p>
Right now the only documentation is "desktop-file-install --help".
desktop-file-validate takes a single argument, the file to validate.
</p>
-Des:
##----------------------------------------
=Pkg: detex 2.7 672 i586
=Sum: TeX to ASCII Converter
+Des:
<!-- DT:Rich -->
<p>This filter removes TeX and LaTeX macros.
</p>
-Des:
##----------------------------------------
=Pkg: devhelp 0.10 59 i586
=Sum: Developer's Help Program for GNOME
+Des:
<!-- DT:Rich -->
<p>Devhelp Features
Devhelp Features<ul>
<li>Full indexing of books in XML
</li><li>HTML viewer (GtkHTML2)
</li><li>Search by function, struct, macro, and more
</li><li>Auto completion
</li><li>Command line search with nice Emacs integration
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: device-mapper 1.02.12 13 i586
=Sum: Device Mapper Tools
+Des:
<!-- DT:Rich -->
<p>Programs, libraries, and man pages for configuring and using the device mapper.
</p>
-Des:
##----------------------------------------
=Pkg: devs 10.2 19 i586
=Sum: Device Files
+Des:
<!-- DT:Rich -->
<p>This package creates special files for accessing system hardware in the /dev directory.
</p>
-Des:
##----------------------------------------
=Pkg: dhcdbd 1.14 11 i586
=Sum: DHCP D-BUS Daemon
+Des:
<!-- DT:Rich -->
<p>DHCP D-BUS daemon (dhcdbd) controls dhclient sessions with D-BUS
and stores and presents DHCP options.
</p>
-Des:
##----------------------------------------
=Pkg: dhcp 3.0.5 7 i586
=Sum: Common Files Used by ISC DHCP Software
+Des:
<!-- DT:Rich -->
<p>This package contains common files used by both the ISC DHCP server
("dhcp-server" package) and client ("dhcp-client").
</p>
-Des:
##----------------------------------------
=Pkg: dhcp-client 3.0.5 7 i586
=Sum: ISC DHCP Client
+Des:
<!-- DT:Rich -->
<p>This is an alternative DHCP client, the ISC DHCP client for Linux. Like
"dhcpcd" (the client that is installed by default), it can be used to configure
the network setup. IP address, hostname, routing, nameserver, netmask, and
broadcast can be dynamically assigned while booting the machine.
</p><p>
It is configurable via the configuration file /etc/dhclient.conf
and you can define your own 'hooks' to be used by the
/sbin/dhclient-script (which is called by the daemon).
</p>
-Des:
##----------------------------------------
=Pkg: dhcp-relay 3.0.5 7 i586
=Sum: DHCP Relay Agent
+Des:
<!-- DT:Rich -->
<p>This is the ISC DHCP relay agent. It can be used as a 'gateway'
for DHCP messages across physical network segments. This is necessary
because requests can be broadcast, and they will normally not be routed.
</p>
-Des:
##----------------------------------------
=Pkg: dhcp-server 3.0.5 7 i586
=Sum: ISC DHCP Server
+Des:
<!-- DT:Rich -->
<p>This package contains the ISC DHCP server.
</p><p>
Please read the documentation in /usr/share/doc/packages/dhcp-server regarding
configuration of the DHCP server.
</p>
-Des:
##----------------------------------------
=Pkg: dhcp-tools 1.6 61 i586
=Sum: DHCP Tools
+Des:
<!-- DT:Rich -->
<p>Two utilities, written by Edwin Groothuis, to test and debug DHCP:
</p><p>
dhcpdump
<hr>
This parses tcpdump output to display the dhcp-packets for
easier checking and debugging.
</p><p>
dhcping
<hr>
This allows the system administrator to check if a remote DHCP server is
still functioning.
</p><p>
Home page: http://www.mavetju.org
</p>
-Des:
##----------------------------------------
=Pkg: dhcpcd 1.3.22pl4 241 i586
=Sum: A DHCP Client Daemon
+Des:
<!-- DT:Rich -->
<p>dhcpcd gets an IP address and other information from a corresponding
DHCP server, configures the network interface automatically, and tries
to renew the lease time depending on the command line option.
</p>
-Des:
##----------------------------------------
=Pkg: dia 0.95 28 i586
=Sum: A Diagram Creation Program
+Des:
<!-- DT:Rich -->
<p>Dia is designed to be much like the commercial program 'Visio.' It can be
used to draw many different kinds of diagrams. It has special
objects to help draw entity relationship diagrams, UML diagrams, SADT,
flowcharts, network diagrams, and simple circuits. It is possible
to add support for new shapes by writing simple XML files, and using a subset
of SVG to draw the shape.
</p><p>
</p><p>
Dia can load and save diagrams to a custom XML format (gzipped by default
to save space), can export diagrams to EPS, PNG, CGM, or SVG formats, and can print
diagrams (including ones that span multiple pages).
</p>
-Des:
##----------------------------------------
=Pkg: dialog 1.0 20 i586
=Sum: Menus and Input Boxes for Shell Scripts
+Des:
<!-- DT:Rich -->
<p>This program lets you use menus and dialog boxes in shell scripts.
</p>
-Des:
##----------------------------------------
=Pkg: diffstat 1.43 20 i586
=Sum: Utility That Provides Statistics Based on the Output of diff
+Des:
<!-- DT:Rich -->
<p>diffstat reads the output of the diff command and displays a histogram
of the insertions, deletions, and modifications in each file.
</p>
-Des:
##----------------------------------------
=Pkg: diffutils 2.8.7 38 i586
=Sum: GNU diff Utilities
+Des:
<!-- DT:Rich -->
<p>The GNU diff utilities find differences between files. <tt>diff</tt> is used to make source code patches, for instance.
</p>
-Des:
##----------------------------------------
=Pkg: digikam 0.8.2 39 i586
=Sum: A KDE Photo Manager
+Des:
<!-- DT:Rich -->
<p>digiKam is a simple digital photo management application for KDE, which makes importing and organizing digital photos easy. The photos can be organized in albums, which can be sorted chronologically, by directory layout, or by custom collections. An easy-to-use interface is provided that enables you to connect to your camera and preview, download, and delete your images.
</p>
-Des:
##----------------------------------------
=Pkg: digikamimageplugins 0.8.2 36 i586
=Sum: Image Manipulation Plug-Ins
+Des:
<!-- DT:Rich -->
<p>Various plug-ins for the image editor in Digikam:
<ul>
<li>AdjustLevels : A plug-in adjusting the image histogram levels manually.
</li><li>SolarizeImage : A plug-in for solarizing an image.
</li><li>Despeckle : A noise reduction filter.
</li><li>OilPaint : An oil painting effect filter.
</li><li>Emboss : An embossed image effect filter.
</li><li>Charcoal : A charcoal drawing image effect filter.
</li><li>Unsharp : An unsharped mask image filter.
</li><li>RainDrop : Adding raindrops randomly in an image.
</li><li>FilmGrain : Adding film grain in an image.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: dirdiff 2.1 31 i586
=Sum: Diff Tool to Merge Source Trees
+Des:
<!-- DT:Rich -->
<p>Dirdiff is a graphical tool for displaying the differences between
directory trees and for merging changes from one tree into another.
Dirdiff can handle up to five trees. It displays a main window with a
list of the files that are different between the trees with colored
squares to indicate the relative ages of the versions. A menu allows
you to display the differences between any two of the versions in
another window. Another menu allows you to copy the file from one
tree to another.
</p>
-Des:
##----------------------------------------
=Pkg: dirmngr 0.9.5 22 i586
=Sum: A Client for Managing and Downloading CRLs
+Des:
<!-- DT:Rich -->
<p>Dirmngr is a client for managing and downloading certificate
revocation lists (CRLs) for X509 certificates and for downloading the
certificates themselves.
</p>
-Des:
##----------------------------------------
=Pkg: djvulibre 3.5.17 27 i586
=Sum: An Open Source Implementation of DjVu
+Des:
<!-- DT:Rich -->
<p>DjVu is a Web-centric format and software platform for distributing documents
and images. DjVuLibre is an open source (GPL) implementation of DjVu,
including viewers, browser plug-ins, decoders, simple encoders, and utilities.
DjVu can advantageously replace PDF, PS, TIFF, JPEG, and GIF for distributing
scanned documents, digital documents, or high-resolution pictures. DjVu content
downloads faster, displays and renders faster, looks nicer on a screen, and
consumes less client resources than competing formats. DjVu images display
instantly and can be smoothly zoomed and panned with no lengthy rerendering.
DjVu is used by hundreds of academic, commercial, governmental, and
noncommercial Web sites around the world.
</p>
-Des:
##----------------------------------------
=Pkg: dmraid 1.0.0.rc13 10 i586
=Sum: A Device-Mapper Software RAID Support Tool
+Des:
<!-- DT:Rich -->
<p>This software discovers, activates, deactivates, and displays properties
of software RAID sets, such as ATARAID, and contained DOS partitions.
</p><p>
dmraid uses libdevmapper and the device-mapper kernel runtime to create
devices with respective mappings for the ATARAID sets discovered.
</p><p>
The following ATARAID types are supported:
<ul>
<li>Highpoint HPT37X
</li><li>Highpoint HPT45X
</li><li>Intel Software RAID
</li><li>Promise FastTrak
</li><li>Silicon Image Medley
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: docbook2x 0.8.5 39 i586
=Sum: DocBook-to-Texinfo Converter
+Des:
<!-- DT:Rich -->
<p>A new tool based on Perl modules.
</p>
-Des:
##----------------------------------------
=Pkg: dockutils 0.1 12 i586
=Sum: Dockingstation support
+Des:
<!-- DT:Rich -->
<p>Dockutils is a collection of scripts providing an infrastructure to easily
trigger actions on docking/undocking requests for different laptops and
vendors.
</p>
-Des:
##----------------------------------------
=Pkg: dos2unix 3.1 335 i586
=Sum: A DOS to UNIX Text Converter
+Des:
<!-- DT:Rich -->
<p>dos2unix is used to convert plain text from DOS (CR/LF) format to UNIX format (LF).
</p>
-Des:
##----------------------------------------
=Pkg: dosbootdisk 1.1 75 i586
=Sum: A DOS Boot Disk Based on FreeDOS
+Des:
<!-- DT:Rich -->
<p>A FreeDOS boot disk. It is useful if you need to run a
flash program to update your BIOS.
</p>
-Des:
##----------------------------------------
=Pkg: dosfstools 2.11 34 i586
=Sum: Utilities for Making and Checking MS-DOS FAT File Systems on Linux
+Des:
<!-- DT:Rich -->
<p>The dosfstools package includes the mkdosfs and dosfsck utilities,
which respectively make and check MS-DOS FAT file systems on hard
drives or on floppies.
</p>
-Des:
##----------------------------------------
=Pkg: doxygen 1.5.0 13 i586
=Sum: Automated C, C++, and Java Documentation Generator
+Des:
<!-- DT:Rich -->
<p>Doxygen is a documentation system for C, C++, Java, and IDL. It can generate an
online class browser (in HTML) and an offline reference manual
(in LaTeX) from a set of documented source files. The documentation is
extracted directly from the sources. Doxygen is developed on a Linux
platform, but it runs on most other UNIX flavors as well. An
executable for Windows 95/NT is also available.
</p>
-Des:
##----------------------------------------
=Pkg: dragonegg 0.1 48 i586
=Sum: Mozilla Plug-In to Embed KDE KParts
+Des:
<!-- DT:Rich -->
<p>dragonegg is a Netscape plug-in for Mozilla and Firefox that allows embedding KDE KParts (KPdf for example) into your browser.
</p>
-Des:
##----------------------------------------
=Pkg: drbd-kmp-bigsmp 0.7.22_2.6.18.2_34 30 i586
=Sum: Distributed Replicated Block Device
+Des:
<!-- DT:Rich -->
<p>Drbd is a distributed replicated block device. It mirrors a
block device over the network to another machine. Think of it
as networked raid 1. It is a building block for setting up
clusters.
</p>
-Des:
##----------------------------------------
=Pkg: drbd-kmp-default 0.7.22_2.6.18.2_34 30 i586
=Sum: Distributed Replicated Block Device
+Des:
<!-- DT:Rich -->
<p>Drbd is a distributed replicated block device. It mirrors a
block device over the network to another machine. Think of it
as networked raid 1. It is a building block for setting up
clusters.
</p>
-Des:
##----------------------------------------
=Pkg: drbd-kmp-xen 0.7.22_2.6.18.2_34 30 i586
=Sum: Distributed Replicated Block Device
+Des:
<!-- DT:Rich -->
<p>Drbd is a distributed replicated block device. It mirrors a
block device over the network to another machine. Think of it
as networked raid 1. It is a building block for setting up
clusters.
</p>
-Des:
##----------------------------------------
=Pkg: drgeo 1.1.0 42 i586
=Sum: Interactive Geometry Program
+Des:
<!-- DT:Rich -->
<p>An interactive geometry program that allows the construction
of interactive geometric figures. It is oriented towards education.
</p>
-Des:
##----------------------------------------
=Pkg: dvb 1.1.0_CVS20060907 18 i586
=Sum: Tools for Digital (DVB) TV Cards
+Des:
<!-- DT:Rich -->
<p>This package contains tools to be used with the driver for DVB cards. You can find further information in /usr/share/doc/packages/dvb/README.SuSE.
</p>
-Des:
##----------------------------------------
=Pkg: dvd+rw-tools 6.1 37 i586
=Sum: Collection of Tools for Mastering DVD+RW/+R Media
##----------------------------------------
=Pkg: dvi2tty 5.3.1 143 i586
=Sum: A TeX-DVI to ASCII Converter
+Des:
<!-- DT:Rich -->
<p>DVI2TTY converts a TeX-DVI file into a readable ASCII text file.
You can then do full text searches without finding the TeX macros.
</p><p>
For documentation, see the man page (man dvi2tty) and
/usr/share/doc/packages/dvi2tty.
</p>
-Des:
##----------------------------------------
=Pkg: dviutils 94.3.19 1044 i586
=Sum: Tools for Working on DVI Files
+Des:
<!-- DT:Rich -->
<p>This package contains some utilities for manipulating DVI documents.
Page selection and rearrangement are supported, including arrangement into
signatures for booklet printing and page merging for N-up printing.
</p><p>
</p><p>
dvibook rearranges pages into book signatures, adds blank pages
as needed
</p><p>
dviselect selects pages and page ranges
</p><p>
dvitodvi performs general page rearrangement of selected pages
</p><p>
dviconcat concatenation of DVI files
</p><p>
Three simple scripts for scaling DIN A4 pages
and rearranging two by two onto a DIN A4 page (a4toa5) are included.
The number of pages must be even (which can be done by
odd2even or dvibook).
</p>
-Des:
##----------------------------------------
=Pkg: e2fsprogs 1.39 21 i586
=Sum: Utilities for the Second Extended File System
+Des:
<!-- DT:Rich -->
<p>Utilities needed to create and maintain ext2 and ext3 file systems
under Linux. Included in this package are: chattr, lsattr, mke2fs,
mklost+found, tune2fs, e2fsck, resize2fs, and badblocks.
</p>
-Des:
##----------------------------------------
=Pkg: e2fsprogs-devel 1.39 21 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: e3 2.6.3 31 i586
=Sum: Tiny Editor with Many Different Modes like Vi, Emacs, and Wordstar
+Des:
<!-- DT:Rich -->
<p>A very tiny editor, which offers many different modes like Vi, Emacs, and Wordstar.
Wordstar is the default mode.
</p>
-Des:
##----------------------------------------
=Pkg: eID-belgium 2.5.9 16 i586
=Sum: Belgian eID middleware
+Des:
<!-- DT:Rich -->
<p>This PKCS11 library can be used for cryptographic operations with the
Belgian electronic identity card. For example, you could use it to authenticate yourself (for example, on a Web site) or for signing electronic documents with a legally binding signature.
</p>
-Des:
##----------------------------------------
=Pkg: eIDconfig-belgium 0.0.1 11 i586
=Sum: Configuration toolkit for the Belgian eID middleware
+Des:
<!-- DT:Rich -->
<p>eIDconfig-belgium aims at easing the configuration of both the Belgian eID middleware and applications that can use this middleware to interact with the Belgian eID card.
</p>
-Des:
##----------------------------------------
=Pkg: eb 4.2 32 i586
=Sum: EB is a C Library for Accessing CD-ROM Books
+Des:
<!-- DT:Rich -->
<p>EB Library is a C library for accessing CD-ROM books. It can be built
on UNIX-based systems. EB Library supports accessing CD-ROM books in
EB, EBG, EBXA, EBXA-C, S-EBXA, and EPWING formats. CD-ROM books in those
formats are popular in Japan. Because CD-ROM books themselves are based
on the ISO 9660 format, you can mount the CDs in the same way as other
ISO 9660 CDs.
</p>
-Des:
##----------------------------------------
=Pkg: ebdev 4.2 32 i586
=Sum: EB Header Files and Libraries
+Des:
<!-- DT:Rich -->
<p>EB header files and libraries.
</p>
-Des:
##----------------------------------------
=Pkg: eblook 1.6.1 31 i586
=Sum: Command Line Tool for Searching Electronic Dictionaries
+Des:
<!-- DT:Rich -->
<p>eblook is a command line tool that uses the EB library.
It provides easy access to many electronic dictionaries published on CD-ROM.
</p><p>
It is recommended that you install the Emacs interface lookup.el, too.
Although it is possible to use eblook from the command line, using it
with Emacs or XEmacs and lookup.el is much easier and offers many extra
features.
</p><p>
You can get lookup.el from http://lookup.sourceforge.net/.
</p><p>
lookup.el is already included as a package in recent versions of XEmacs.
</p>
-Des:
##----------------------------------------
=Pkg: ebview 0.3.6 37 i586
=Sum: Electronic Book Viewer: Program for Reading EPWING CD-ROM Dictionaries
+Des:
<!-- DT:Rich -->
<p>Electronic Book Viewer is a program for reading EPWING CD-ROM dictionaries.
</p>
-Des:
##----------------------------------------
=Pkg: ed 0.2 897 i586
=Sum: Standard UNIX Line Editor
+Des:
<!-- DT:Rich -->
<p>The standard, old Unix line editor.
</p>
-Des:
##----------------------------------------
=Pkg: eel 2.16.0 30 i586
=Sum: The Eazel Extensions Library
+Des:
<!-- DT:Rich -->
<p>This library extends the Gtk+ library with some useful routines for
applications like Nautilus.
</p>
-Des:
##----------------------------------------
=Pkg: eel-devel 2.16.0 30 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: eject 2.1.0 30 i586
=Sum: A Program to Eject Media under Software Control
+Des:
<!-- DT:Rich -->
<p></p><p>
Eject allows removable media (typically a CD-ROM, floppy
disk, tape, or JAZ or ZIP disk) to be ejected under software
control. The command can also control some multidisc CD-ROM
changers, the autoeject feature supported by some devices,
and close the disc tray of some CD-ROM drives.
</p>
-Des:
##----------------------------------------
=Pkg: ekiga 2.0.3 30 i586
=Sum: A Gnome based SIP/H323 teleconferencing application
+Des:
<!-- DT:Rich -->
<p>Ekiga (formely known as GnomeMeeting) is an open source VoIP and video conferencing application for GNOME. Ekiga uses both the H.323 and SIP protocols. It supports many audio and video codecs, and is interoperable with other SIP compliant software and also with Microsoft NetMeeting.
</p>
-Des:
##----------------------------------------
=Pkg: elilo 3.6 40 i586
=Sum: EFI Linux Loader
+Del:
<!-- DT:Rich -->
<p>This package is required for the proper operation and management of
your Linux system.
</p><p>
Remove this package only if you know what you are
doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>The EFI Linux boot loader.
</p>
-Des:
##----------------------------------------
=Pkg: emacs 21.3 249 i586
=Sum: GNU Emacs Base Package
+Des:
<!-- DT:Rich -->
<p>Basic package for the GNU Emacs editor.
Requires emacs-x11 or emacs-nox.
</p>
-Des:
##----------------------------------------
=Pkg: emacs-auctex 11.83 24 i586
=Sum: AUC TeX: An Emacs Extension
+Des:
<!-- DT:Rich -->
<p>These macros make it easier for you to write TeX documents
with GNU Emacs. Documentation can be found under:
</p><p>
/usr/share/doc/packages/emacs-auctex/
</p><p>
and in the dvi files math-ref.dvi and tex-ref.dvi (reference cards) and in
the info file auctex in emacs info-mode.
</p><p>
AuC TeX is integrated in XEmacs 19.15 and higher, so these packages may not
be installed concurrently. Note that the binary formats of the
byte-compiled lisp files of the two emacs editors are
incompatible, so you cannot use this package for
XEmacs.
</p>
-Des:
##----------------------------------------
=Pkg: emacs-info 21.3 249 i586
=Sum: Info files for GNU Emacs
+Des:
<!-- DT:Rich -->
<p>This package contains all the Info files for GNU Emacs.
These files can be read online with GNU Emacs. They describe
Emacs and some of its modes.
</p>
-Des:
##----------------------------------------
=Pkg: emacs-x11 21.3 249 i586
=Sum: GNU Emacs: Emacs binary with X Window System Support
+Des:
<!-- DT:Rich -->
<p>Call it
</p><p>
Emacs
</p><p>
Love it or leave it.
</p>
-Des:
##----------------------------------------
=Pkg: encfs 1.3.1 22 i586
=Sum: Userspace Encrypted File System
+Des:
<!-- DT:Rich -->
<p>EncFS provides an encrypted file system in user space. It runs without
any special permissions and uses the FUSE library and Linux kernel
module to provide the file system interface.
</p>
-Des:
##----------------------------------------
=Pkg: enchant 1.2.0 36 i586
=Sum: An Enchanting Spell Checking Library
+Des:
<!-- DT:Rich -->
<p>A library that wraps around other spell checking back-ends.
</p>
-Des:
##----------------------------------------
=Pkg: enchant-devel 1.2.0 36 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: enscript 1.6.4 39 i586
=Sum: An ASCII to PostScript(tm) Converter
+Des:
<!-- DT:Rich -->
<p>Enscript converts ASCII files to PostScript and writes the generated
output to a file or sends it directly to the printer.
</p><p>
The Enscript configuration file is in /etc/enscript.cfg.
</p>
-Des:
##----------------------------------------
=Pkg: eog 2.16.1 27 i586
=Sum: Eye of GNOME for the GNOME 2.x Desktop
+Des:
<!-- DT:Rich -->
<p>Eye of GNOME is a very fast picture viewer. It can be used as a plug-in for Nautilus or as a stand-alone application. This version of EOG is compiled for the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: epic 2.2 33 i586
=Sum: Enhanced Programmable ircII Client
+Des:
<!-- DT:Rich -->
<p>EPIC is an IRC client almost 100% compatible with the old ircII
client from which it was derived. It has improved scripting,
better configurability, and more.
</p>
-Des:
##----------------------------------------
=Pkg: epiphany 2.16.1 29 i586
=Sum: GNOME Web Browser Based on the Mozilla Rendering Engine
+Des:
<!-- DT:Rich -->
<p>Epiphany is a Web browser for the GNOME Desktop. Its principles are simplicity and standards compliance.
</p>
-Des:
##----------------------------------------
=Pkg: epiphany-extensions 2.16.1 29 i586
=Sum: Extensions Collection for Epiphany
+Des:
<!-- DT:Rich -->
<p>This package contains the following Epiphany extensions: Error Viewer and Validator, Mouse Gestures, Popup Blocker, and Tabs Move-To Menu.
</p>
-Des:
##----------------------------------------
=Pkg: esound 0.2.36 42 i586
=Sum: A Sound Daemon for Enlightenment and GNOME
+Des:
<!-- DT:Rich -->
<p>A multiplexing and caching sound daemon. It can use ALSA or
OSS for sound output. Many projects, including Enlightenment and GNOME,
use esound to play and record their sounds.
</p>
-Des:
##----------------------------------------
=Pkg: esound-devel 0.2.36 42 i586
=Sum: EsounD Development Package
+Des:
<!-- DT:Rich -->
<p>EsounD development package.
</p>
-Des:
##----------------------------------------
=Pkg: ethtool 5 19 i586
=Sum: Examine and Tune Ethernet-Based Network Interfaces
+Des:
<!-- DT:Rich -->
<p>Ethtool is a small utility for examining and tuning ethernet-based
network interfaces. See the man page for more details.
</p>
-Des:
##----------------------------------------
=Pkg: evince 0.6.1 22 i586
=Sum: GNOME Document Viewer
+Des:
<!-- DT:Rich -->
<p>Evince is a document viewer capable of displaying multiple and single
page document formats like PDF and PostScript. For more general
information about Evince, visit the project Web site at
http://www.gnome.org/projects/evince/.
</p>
-Des:
##----------------------------------------
=Pkg: evms 2.5.5 67 i586
=Sum: EVMS--Enterprise Volume Management System
+Des:
<!-- DT:Rich -->
<p>This package contains the userspace tools needed to manage EVMS (Enterprise
Volume Management System) volumes.
</p><p>
See the EVMS-HOWTO in /usr/share/doc/packages/EVMS
for detailed instructions on patching your kernel with EVMS and using the
tools after installation.
</p>
-Des:
##----------------------------------------
=Pkg: evms-gui 2.5.5 67 i586
=Sum: EVMS - GUI Frontend
+Des:
<!-- DT:Rich -->
<p>This package contains the GUI frontends needed to manage EVMS (Enterprise
Volume Management System) volumes.
</p>
-Des:
##----------------------------------------
=Pkg: evolution 2.8.2 4 i586
=Sum: The Integrated GNOME Mail, Calendar, and Address Book Suite
+Des:
<!-- DT:Rich -->
<p>Evolution consists of modular components (at the moment: mailer, calendar,
and address book) that should make daily life easier. Because of the
modular design, it is possible to plug new components into Evolution or embed the
existing ones in other applications.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-data-server 1.8.2 5 i586
=Sum: Evolution Data Server
+Des:
<!-- DT:Rich -->
<p>Evolution Data Server provides a central location for your address book and calendar in the GNOME Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-exchange 2.8.2 4 i586
=Sum: Evolution Connector for Microsoft Exchange Server 2000/2003
+Des:
<!-- DT:Rich -->
<p>With the Connector for Microsoft Exchange installed, Evolution functions as an Exchange client, enabling users to become full participants in companywide group scheduling and other collaborative tasks. Linux and Solaris users can access public folders, Global Address Lists, e-mail, calendar, task lists, and group scheduling information.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-pilot 2.8.2 4 i586
=Sum: The Integrated GNOME Mail, Calendar, and Addressbook Suite
+Des:
<!-- DT:Rich -->
<p>Evolution consists of modular components (at the moment: mailer, calendar,
and addressbook) which should make daily life easier. Because of the
modular design one can plug new components into Evolution or embed the
existing ones in other applications.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-sharp 0.12.0 5 i586
=Sum: Mono Bindings for Evolution
+Des:
<!-- DT:Rich -->
<p>Mono bindings for Evolution.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-webcal 2.8.0 26 i586
=Sum: Evolution Webcal
+Des:
<!-- DT:Rich -->
<p>Webcal subscribes to Web calendars for Evolution.
</p>
-Des:
##----------------------------------------
=Pkg: exiftool 6.49 10 i586
=Sum: A Highly Customizable Perl Script for Reading and Writing Meta Information in Files
+Des:
<!-- DT:Rich -->
<p>ExifTool is a Perl module with an included command line application for reading and writing meta information in image files. It recognizes EXIF, GPS, IPTC, XMP, JFIF, GeoTIFF, ICC Profile, Photoshop IRB, and ID3 meta information as well as the maker notes of many digital cameras including Canon, Casio, FujiFilm, Kodak, Leaf, Minolta/Konica-Minolta, Nikon, Olympus/Epson, Panasonic/Leica, Pentax/Asahi, Ricoh, Sanyo, and Sigma/Foveon.
</p>
-Des:
##----------------------------------------
=Pkg: expat 2.0.0 32 i586
=Sum: XML Parser Toolkit
+Des:
<!-- DT:Rich -->
<p>Expat is an XML 1.0 parser written in C. It aims to be fully
conformant. It is currently not a validating XML processor. The current
production version of expat can be downloaded from
ftp://ftp.jclark.com/pub/xml/expat.zip.
The directory xmltok contains a low-level library for tokenizing
XML. The interface is documented in xmltok/xmltok.h.
The directory xmlparse contains an XML parser library that is built on
top of the xmltok library. The interface is documented in
xmlparse/xmlparse.h. The directory sample contains a simple example
program using this interface. The directory sample/build.bat is a batch file to build
the example using Visual C++.
The directory xmlwf contains the xmlwf application, which uses the
xmlparse library. The arguments to xmlwf are one or more files to
check for well-formedness. An option -d dir can be
specified. For each well-formed input file, the corresponding canonical
XML is written to dir/f, where f is the filename (without any path)
of the input file. A -x option causes references to external general
entities to be processed. A -s option makes documents that are not
stand-alone cause an error (a document is considered stand-alone if
it is intrinsically stand-alone because it has no external subset and no
references to parameter entities in the internal subset or it is
declared as stand-alone in the XML declaration).
</p>
-Des:
##----------------------------------------
=Pkg: expect 5.43.0 34 i586
=Sum: A Tool for Automating Interactive Programs
+Des:
<!-- DT:Rich -->
<p>Expect is a tool primarily for automating interactive applications,
such as telnet, ftp, passwd, fsck, rlogin, tip, and more. Expect really
makes this stuff trivial. Expect is also useful for testing these
applications. It is described in many books, articles, papers,
and FAQs. There is an entire book on it available from O'Reilly.
</p>
-Des:
##----------------------------------------
=Pkg: f-spot 0.2.2 28 i586
=Sum: GNOME Photo Management Application
+Des:
<!-- DT:Rich -->
<p>F-Spot is an application designed to provide personal photo management to the GNOME desktop. Features include import, export, printing, and advanced sorting of digital images.
</p>
-Des:
##----------------------------------------
=Pkg: fam 2.7.0 29 i586
=Sum: File Alteration Monitoring Daemon
+Des:
<!-- DT:Rich -->
<p>Fam is a file alteration monitoring service. With it, you can receive signals when files are created or changed.
</p><p>
This package provides libfam, which is used by KDE and GNOME. It also provides a tool for the console called fileschanged.
</p><p>
To use fam notifications (it can reduce the network load on NFS servers, especially if they host user home directories) you need to run the fam daemon, which can be found in the fam-server package.
</p>
-Des:
##----------------------------------------
=Pkg: fam-devel 2.7.0 29 i586
=Sum: Include Files and Libraries Mandatory for Development
+Des:
<!-- DT:Rich -->
<p>Fam is a file alteration monitoring service. This means that you can receive signals if files are created or changed.
</p><p>
This package provides the files that are needed to compile applications which use the fam service.
</p>
-Des:
##----------------------------------------
=Pkg: fam-server 2.7.0 29 i586
=Sum: File Alternation Monitoring Daemon
+Des:
<!-- DT:Rich -->
<p>fam is a file alternation monitoring service. It provides signals when files are created or changed.
</p><p>
This package provides the fam daemon and runlevel scripts.
</p>
-Des:
##----------------------------------------
=Pkg: fbiterm 0.5.20040304 66 i586
=Sum: Internationalized Terminal Emulator for Framebuffers
+Des:
<!-- DT:Rich -->
<p>An internationalized terminal emulator for framebuffers.
</p>
-Des:
##----------------------------------------
=Pkg: fbset 2.1 815 i586
=Sum: Framebuffer Configuration Tool
+Des:
<!-- DT:Rich -->
<p>FBSet can query and change console framebuffer settings.
</p><p>
Some framebuffers do not support this, such as the VESA framebuffer
"vesafb".
</p>
-Des:
##----------------------------------------
=Pkg: fcwnn 1.1.1a017 578 i586
=Sum: Free cWnn Chinese Input System (Mainland China)
+Des:
<!-- DT:Rich -->
<p>Free cWnn Chinese Input System (mainland China).
</p>
-Des:
##----------------------------------------
=Pkg: fcwnncom 1.1.1a017 578 i586
=Sum: Free cWnn/tWnn Chinese Input System Common Files (Mainland and Taiwan)
+Des:
<!-- DT:Rich -->
<p>This package includes the common files for the Free cWnn and Free tWnn
Chinese Input Systems. Free cWnn is for mainland Chinese and free tWnn
is for Taiwan-Chinese.
</p>
-Des:
##----------------------------------------
=Pkg: fcwnndev 1.1.1a017 578 i586
=Sum: Development Libraries and Header Files for Free cWnn
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and libraries for building
client programs that use the Chinese Input System, Free cWnn.
</p>
-Des:
##----------------------------------------
=Pkg: festival 1.96 18 i586
=Sum: The Festival Speech Synthesis System
+Des:
<!-- DT:Rich -->
<p>Festival is a multilingual speech synthesis system developed at CSTR. It offers a full text-to-speech system with various APIs as well as an environment for development and research of speech synthesis techniques. It is written in C++ and has a Scheme-based command interpreter for general control.
</p>
-Des:
##----------------------------------------
=Pkg: fetchmail 6.3.5 13 i586
=Sum: Full-Featured POP and IMAP Mail Retrieval Daemon
+Des:
<!-- DT:Rich -->
<p>Fetchmail is a robust and well-documented remote mail retrieval
and forwarding utility intended to be used over on-demand TCP/IP
links (such as SLIP or PPP connections).
</p><p>
Fetchmail retrieves mail from remote mail servers and forwards it to your
local machine's delivery system, so it can be read by normal
mail user agents, such as mutt, elm, pine, (x)emacs/gnus, or mailx.
</p><p>
fetchmailconf, an interactive GUI configurator suitable for end-users,
is included in the fetchmailconf package.
</p>
-Des:
##----------------------------------------
=Pkg: fftw 2.1.5 41 i586
=Sum: Discrete Fourier Transform (DFT) C Subroutine Library
+Des:
<!-- DT:Rich -->
<p>FFTW is a C subroutine library for computing Discrete Fourier Transforms (DFT) in one or more dimensions, of both real and complex data, and of arbitrary input size.
</p>
-Des:
##----------------------------------------
=Pkg: fftw3 3.1.2 19 i586
=Sum: Discrete Fourier Transform (DFT) C Subroutine Library
+Des:
<!-- DT:Rich -->
<p>FFTW is a C subroutine library for computing the Discrete Fourier
Transform (DFT) in one or more dimensions, of both real and complex
data, and of arbitrary input size.
</p>
-Des:
##----------------------------------------
=Pkg: figlet 2.2.2 32 i586
=Sum: Tool for Creating Cool ASCII-Art Signatures
+Des:
<!-- DT:Rich -->
<p>FIGlet can create characters in many different styles and can kern and
"smush" these characters together in various ways. FIGlet output is
generally reminiscent of the sort of "signatures" many people like to
put at the end of e-mail and UseNet messages.
</p>
-Des:
##----------------------------------------
=Pkg: file 4.17 23 i586
=Sum: A Tool to Determine File Types
+Del:
<!-- DT:Rich -->
<p>This package is required by lpdfilter.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>With the file command, you can obtain information on the file type of a specified
file. File type recognition is controlled by the file /etc/magic, which
contains the classification criteria. This command is used by apsfilter
to permit automatic printing of different file types.
</p>
-Des:
##----------------------------------------
=Pkg: file-roller 2.16.1 26 i586
=Sum: An Archive Manager for GNOME
+Des:
<!-- DT:Rich -->
<p>File Roller is an archive manager for GNOME. With it, you can create and modify archives, view the contents of an archive, view a file contained in the archive, and extract files from the archive. File Roller is a front-end (a graphical interface) for archiving programs like tar and zip. The supported file types are:
<ul>
<li>Tar archives uncompressed (.tar) or compressed with
</li><li>gzip (.tar.gz, .tgz)
</li><li>bzip (.tar.bz, .tbz)
</li><li>bzip2 (.tar.bz2, .tbz2)
</li><li>compress (.tar.Z, .taz)
</li><li>lzop (.tar.lzo, .tzo)
</li><li>Zip archives (.zip)
</li><li>Jar archives (.jar, .ear, .war)
</li><li>Lha archives (.lzh)
</li><li>Rar archives (.rar)
</li><li>Single files compressed with gzip, bzip, bzip2, compress, lzop
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: fileshareset 2.0 207 i586
=Sum: Set and list fileshares
+Des:
<!-- DT:Rich -->
<p>This package contains the the fileshareset utility to allow users to add or
remove file shares. It's also possible to list currently shared locations.
/etc/security/fileshare.conf is the main configuration file.
</p>
-Des:
##----------------------------------------
=Pkg: filesystem 10.2 22 i586
=Sum: Basic Directory Layout
+Des:
<!-- DT:Rich -->
<p>This package installs the basic directory structure. It also includes the
home directories of system users.
</p>
-Des:
##----------------------------------------
=Pkg: fillup 1.42 138 i586
=Sum: Tool for Merging Config Files
+Del:
<!-- DT:Rich -->
<p>This package is required for proper management of your
Linux system.
</p><p>
Remove it only if you are sure that you know what you are doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>fillup merges files that hold variables. A variable is
defined by an entity composed of a preceding comment, a
variable name, an assignment delimiter, and a related
variable value. A variable is determined by its variable
name.
</p>
-Des:
##----------------------------------------
=Pkg: filters 2006.11.1 8 i586
=Sum: Printer Filters for HP, Lexmark, CaPSL, Citizen, and Apple
+Des:
<!-- DT:Rich -->
<p>This package includes several converters for printers from
HP, Lexmark, Canon, Citizen, and Apple.
pnm, ppm, pbm, pgm to PPA (HP Printing Performance Architecture)<ul>
<li>supports HP 720 Series(710C,720C,722C), HP 820 series
(820Cse, 820Cxi) and HP 1000 series (1000Cse, 1000Cxi).
bitcmyk to Lexmark Z11 and Lexmark lex2070
PCL to CaPSL (Canon Laser, see gs devices lbp8 and lips3)
ppmraw to Lexmark 1100 bitcmyk to Apple StyleWriter
pbmraw to Lexmark 2030 ppmraw to Citizen Printiva
For more information see the docs in /usr/share/doc/packages/filters
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: findutils 4.2.28 24 i586
=Sum: GNU find--Finding Files
+Des:
<!-- DT:Rich -->
<p>This package contains GNU find and xargs. The programs comply with
POSIX 1003.2. They also support additional options, some borrowed
from Unix and some unique to GNU.
</p>
-Des:
##----------------------------------------
=Pkg: findutils-locate 4.2.28 24 i586
=Sum: Tool for Locating Files (GNU Findutils Subpackage)
+Des:
<!-- DT:Rich -->
<p>This package contains the locate program which is part of the GNU findutils software suite.
</p><p>
You can find files fast using locate. On installing findutils-locate an additional daily cron job will be added to the cron system. This job will update the files database every night or shortly after switching on the computer.
</p>
-Des:
##----------------------------------------
=Pkg: finger 1.3 33 i586
=Sum: Show User Information (Client)
+Des:
<!-- DT:Rich -->
<p>Finger is a utility that allows users to see information about system
users (login name, home directory, name, and more) on local and remote systems.
</p>
-Des:
##----------------------------------------
=Pkg: finger-server 1.3 33 i586
=Sum: A Server for Showing User Information
+Des:
<!-- DT:Rich -->
<p>The finger daemon implements a simple protocol based on RFC1196 that
provides an interface to the Name and Finger programs at several network
sites. The program is supposed to return a friendly human-oriented
status report on either the system at the moment or a particular person.
</p>
-Des:
##----------------------------------------
=Pkg: firmwarekit r1.102 9 i586
=Sum: BIOS checker that validates ACPI and other parts for x86 and x86_64 machines
+Des:
<!-- DT:Rich -->
<p>This tool, developed by Intel, is meant for vendors to validate and certifcate their BIOS.
It is also convenient for ACPI or general BIOS related bugs. If you have an
ACPI error/warning, run this tool and provide output for bug tracking
information
</p>
-Des:
##----------------------------------------
=Pkg: fkwnn 1.1.1a017 578 i586
=Sum: Free kWnn Korean Input System
+Des:
<!-- DT:Rich -->
<p>Free kWnn Korean input system.
</p>
-Des:
##----------------------------------------
=Pkg: fkwnndev 1.1.1a017 578 i586
=Sum: Development Libraries and Header Files for Free kWnn
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and libraries for building
client programs that use the Korean Input System, Free kWnn.
</p>
-Des:
##----------------------------------------
=Pkg: flac 1.1.2 34 i586
=Sum: Free Lossless Audio Codec
+Des:
<!-- DT:Rich -->
<p>FLAC is an open source lossless audio codec developed by Josh Coalson.
</p>
-Des:
##----------------------------------------
=Pkg: flash-player 7.0.68.0 16 i586
=Sum: Macromedia Flash Plug-In
+Des:
<!-- DT:Rich -->
<p>This package contains Macromedia's Flash plug-in for the supported Web browsers.
This includes Netcape6, Mozilla (all Gecko browsers), and Konqueror.
Netscape 4 is not able to use Flash 6.
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>Macromedia Flash Player 7, Macromedia Flash Player 6, and Macromedia Shockwave
Player End User License Agreement
</p><p>
MACROMEDIA SOFTWARE END USER LICENSE AGREEMENT FOR DESKTOP USE ONLY
</p><p>
IMPORTANT: THIS SOFTWARE END USER LICENSE AGREEMENT ("EULA") IS A LEGAL
AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR, IF PURCHASED OR OTHERWISE
ACQUIRED BY OR FOR AN ENTITY, AN ENTITY) AND MACROMEDIA. READ IT CAREFULLY
BEFORE COMPLETING THE INSTALLATION PROCESS AND USING THE SOFTWARE. IT PROVIDES
A LICENSE TO USE THE SOFTWARE AND CONTAINS WARRANTY INFORMATION AND LIABILITY
DISCLAIMERS. BY SELECTING THE DOWNLOAD OR INSTALL NOW BUTTON AND USING THE
SOFTWARE, YOU ARE CONFIRMING YOUR ACCEPTANCE OF THE SOFTWARE AND AGREEING TO
BECOME BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO BE BOUND BY
THESE TERMS, THEN DO NOT INSTALL THE SOFTWARE.
<ol>
<li>Definitions
</li><li>"Macromedia" means Macromedia, Inc. and its licensors, if any.
</li><li>"Software" means only the Macromedia software program(s) and third
party software programs, in each case, supplied by Macromedia herewith,
and corresponding documentation, associated media, printed materials,
and online or electronic documentation, and all updates or upgrades of
the above that are provided to you.
</li><li>License Grants
</li><li>You may install and use the Software on a single desktop computer that
has a Windows PC operating system (including desktop PC versions of
Windows 95, 98, 2000, NT, ME and XP (Home and Professional), a
Macintosh desktop operating system, a Linux desktop operating system,
or a Solaris desktop operating system; provided, however, that,
notwithstanding anything contrary contained herein, you may not use the
Software on any non-PC product or any embedded or device versions of
the above operating systems, including, but not limited to, mobile
devices, internet appliances, set top boxes (STB), handhelds, PDAs,
phones, web pads, tablets, game consoles, TVs, DVDs, gaming machines,
home automation systems, kiosks or any other consumer electronics
devices or mobile/cable/satellite/television or closed system based
service. A license for the Software may not be shared, installed or
used concurrently on different computers.
</li><li>You agree that Macromedia may audit your use of the Software for
compliance with these terms at any time, upon reasonable notice. In the
event that such audit reveals any use of the Software by you other than
in full compliance with the terms of this Agreement, you shall
reimburse Macromedia for all reasonable expenses related to such audit
in addition to any other liabilities you may incur as a result of such
non-compliance.
</li><li>Your license rights under this EULA are non-exclusive.
</li><li>Certain rights are not granted under this Agreement, but may be
available under a separate agreement. If you would like to enter into a
distribution agreement or learn of other licensing strategies, please
go to: http://www.macromedia.com/software/flash/open/licensing/.
</li><li>License Restrictions
</li><li>You may not make or distribute copies of the Software, or
electronically transfer the Software from one computer to another or
over a network.
</li><li>You may not alter, merge, modify, adapt or translate the Software, or
decompile, reverse engineer, disassemble, or otherwise reduce the
Software to a human-perceivable form.
</li><li>You may not sell, rent, lease, or sublicense the Software.
</li><li>You may not modify the Software or create derivative works based upon
the Software.
</li><li>You may not export the Software into any country prohibited by the
United States Export Administration Act and the regulations thereunder.
</li><li>In the event that you fail to comply with this EULA, Macromedia may
terminate the license and you must destroy all copies of the Software
(with all other rights of both parties and all other provisions of this
EULA surviving any such termination).
</li><li>You shall not use the Software to develop any software or other
technology having the same primary function as the Software, including
but not limited to using the Software in any development or test
procedure that seeks to develop like software or other technology, or
to determine if such software or other technology performs in a similar
manner as the Software.
</li><li>Ownership
</li></ol>
The foregoing license gives you limited license to use the Software.
Macromedia and its suppliers retain all right, title and interest,
including all copyright and intellectual property rights, in and to, the
Software and all copies thereof. All rights not specifically granted in
this EULA, including Federal and International Copyrights, are reserved by
Macromedia and its suppliers.
<ol>
<li>WARRANTY DISCLAIMER
</li><li>THE SOFTWARE IS PROVIDED TO YOU FREE OF CHARGE, AND ON AN "AS-IS"
BASIS. MACROMEDIA PROVIDES NO TECHNICAL SUPPORT, WARRANTIES OR REMEDIES
FOR THE SOFTWARE.
</li><li>MACROMEDIA AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES AND
REPRESENTATIONS, WHETHER EXPRESS, IMPLIED, OR OTHERWISE, INCLUDING THE
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
ALSO, THERE IS NO WARRANTY OF NON-INFRINGEMENT AND TITLE OR QUIET
ENJOYMENT. MACROMEDIA DOES NOT WARRANT THAT THE SOFTWARE IS ERROR-FREE
OR WILL OPERATE WITHOUT INTERRUPTION. NO RIGHTS OR REMEDIES REFERRED TO
IN ARTICLE 2A OF THE UCC WILL BE CONFERRED ON YOU UNLESS EXPRESSLY
GRANTED HEREIN. THE SOFTWARE IS NOT DESIGNED, INTENDED OR LICENSED FOR
USE IN HAZARDOUS ENVIRONMENTS REQUIRING FAIL-SAFE CONTROLS, INCLUDING
WITHOUT LIMITATION, THE DESIGN, CONSTRUCTION, MAINTENANCE OR OPERATION
OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS,
AIR TRAFFIC CONTROL, AND LIFE SUPPORT OR WEAPONS SYSTEMS. MACROMEDIA
SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR
SUCH PURPOSES.
</li><li>IF APPLICABLE LAW REQUIRES ANY WARRANTIES WITH RESPECT TO THE SOFTWARE,
ALL SUCH WARRANTIES ARE LIMITED IN DURATION TO NINETY (90) DAYS FROM
THE DATE OF DELIVERY.
</li><li>NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY MACROMEDIA, ITS
DEALERS, DISTRIBUTORS, AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY OR
IN ANY WAY INCREASE THE SCOPE OF ANY WARRANTY PROVIDED HEREIN.
</li><li>(USA only) SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER LEGAL
RIGHTS THAT VARY FROM STATE TO STATE.
</li><li>MACROMEDIA SHALL HAVE NO RESPONSIBILITY IF THE SOFTWARE HAS BEEN
ALTERED IN ANY WAY, OR FOR ANY FAILURE THAT ARISES OUT OF USE OF THE
SOFTWARE WITH OTHER THAN A RECOMMENDED HARDWARE CONFIGURATION, PLATFORM
OR OPERATING SYSTEM.
</li><li>LIMITATION OF LIABILITY
</li><li>NEITHER MACROMEDIA NOR ITS SUPPLIERS SHALL BE LIABLE TO YOU OR ANY
THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, COVER OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR THE
INABILITY TO USE EQUIPMENT OR ACCESS DATA, LOSS OF BUSINESS, LOSS OF
PROFITS, BUSINESS INTERRUPTION OR THE LIKE), ARISING OUT OF THE USE OF,
OR INABILITY TO USE, THE SOFTWARE AND BASED ON ANY THEORY OF LIABILITY
INCLUDING BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF MACROMEDIA OR ITS
REPRESENTATIVES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
AND EVEN IF A REMEDY SET FORTH HEREIN IS FOUND TO HAVE FAILED OF ITS
ESSENTIAL PURPOSE.
</li><li>MACROMEDIA'S TOTAL LIABILITY TO YOU FOR ACTUAL DAMAGES FOR ANY CAUSE
WHATSOEVER WILL BE LIMITED TO THE GREATER OF $50 OR THE AMOUNT PAID BY
YOU FOR THE SOFTWARE THAT CAUSED SUCH DAMAGE.
</li><li>(USA only) SOME STATES DO NOT ALLOW THE LIMITATION OR EXCLUSION OF
LIABILITY FOR INCIDENTAL OF CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU AND YOU MAY ALSO HAVE
OTHER LEGAL RIGHTS THAT VARY FROM STATE TO STATE.
</li><li>THE FOREGOING LIMITATIONS ON LIABILITY ARE INTENDED TO APPLY TO ALL
ASPECTS OF THIS EULA.
</li><li>Basis of Bargain
</li></ol>
The Warranty Disclaimer and Limited Liability set forth above are
fundamental elements of the basis of the agreement between Macromedia and
you. Macromedia would not be able to provide the Software on an economic
basis without such limitations. Such Warranty Disclaimer and Limited
Liability inure to the benefit of Macromedia's licensors.
<ol>
<li>U.S. GOVERNMENT RESTRICTED RIGHTS LEGEND
</li></ol>
This Software and the documentation are provided with "RESTRICTED RIGHTS"
applicable to private and public licenses alike. Without limiting the
foregoing, use, duplication, or disclosure by the US Government is subject
to restrictions as set forth in this EULA and as provided in DFARS
227.7202-1(a) and 227.7202-3(a) (1995), DFARS 252.227-7013 (c)(1)(ii)(OCT
1988), FAR 12.212(a)(1995), FAR 52.227-19, or FAR 52.227-14, as applicable.
Manufacturer: Macromedia, Inc., 600 Townsend, San Francisco, CA 94103.
<ol>
<li>(Outside of the USA) Consumer End Users Only
</li></ol>
The limitations or exclusions of warranties and liability contained in this
EULA do not affect or prejudice the statutory rights of a consumer, i.e., a
person acquiring goods otherwise than in the course of a business.
</p><p>
The limitations or exclusions of warranties, remedies or liability
contained in this EULA shall apply to you only to the extent such
limitations or exclusions are permitted under the laws of the jurisdiction
where you are located.
<ol>
<li>Third Party Software
</li></ol>
The Software may contain third party software which requires notices and/or
additional terms and conditions. Such required third party software notices
and/or additional terms and conditions are located at www.macromedia.com/go
/thirdparty/ and are made a part of and incorporated by reference into this
EULA. By accepting this EULA, you are also accepting the additional terms
and conditions, if any, set forth therein.
<ol>
<li>General
</li></ol>
This EULA shall be governed by the internal laws of the State of
California, without giving effect to principles of conflict of laws. You
hereby consent to the exclusive jurisdiction and venue of the state courts
sitting in San Francisco County, California or the federal courts in the
Northern District of California to resolve any disputes arising under this
EULA. In each case this EULA shall be construed and enforced without regard
to the United Nations Convention on the International Sale of Goods.
</p><p>
This EULA contains the complete agreement between the parties with respect
to the subject matter hereof, and supersedes all prior or contemporaneous
agreements or understandings, whether oral or written. You agree that any
varying or additional terms contained in any purchase order or other
written notification or document issued by you in relation to the Software
licensed hereunder shall be of no effect. The failure or delay of
Macromedia to exercise any of its rights under this EULA or upon any breach
of this EULA shall not be deemed a waiver of those rights or of the breach.
</p><p>
No Macromedia dealer, agent or employee is authorized to make any amendment
to this EULA.
</p><p>
If any provision of this EULA shall be held by a court of competent
jurisdiction to be contrary to law, that provision will be enforced to the
maximum extent permissible, and the remaining provisions of this EULA will
remain in full force and effect.
</p><p>
All questions concerning this EULA shall be directed to: Macromedia, Inc.,
600 Townsend, San Francisco, CA 94103, Attention: General Counsel.
</p><p>
Macromedia and other trademarks contained in the Software are trademarks or
registered trademarks of Macromedia, Inc. in the United States and/or other
countries. Third party trademarks, trade names, product names and logos may
be the trademarks or registered trademarks of their respective owners. You
may not remove or alter any trademark, trade names, product names, logo,
copyright or other proprietary notices, legends, symbols or labels in the
Software. This EULA does not authorize you to use Macromedia's or its
licensors' names or any of their respective trademarks.
</p>
-Eul:
##----------------------------------------
=Pkg: flex 2.5.33 21 i586
=Sum: Fast Lexical Analyzer Generator
+Des:
<!-- DT:Rich -->
<p>FLEX is a tool for generating scanners: programs that
recognize lexical patterns in text.
</p>
-Des:
##----------------------------------------
=Pkg: flex-old 2.5.4a 31 i586
=Sum: Fast Lexical Analyser Generator
+Des:
<!-- DT:Rich -->
<p>FLEX is a tool for generating scanners: programs which
recognize lexical patterns in text.
</p><p>
This package contains flex-2.5.4, it will be dropped
when all packages build with flex-2.5.31.
</p>
-Des:
##----------------------------------------
=Pkg: fltk 1.1.7 23 i586
=Sum: Free C++ GUI Toolkit for the X Window System, OpenGL, and WIN32 (Windows 95,98,NT)
+Des:
<!-- DT:Rich -->
<p>The Fast Light Tool Kit ("FLTK", pronounced "fulltick") is a C++ graphical
user interface toolkit for the X Window System (UNIX(r)), OpenGL(r), and Microsoft(r)
Windows(r) NT 4.0, 95, or 98.
The installation of this package requires you to install a 3D library.
If you do not have hardware 3D, you can use the software OpenGL library
in the mesasoft package (series x3d). The library can be recompiled without
3D support.
</p>
-Des:
##----------------------------------------
=Pkg: fluidsynth 1.0.7a 27 i586
=Sum: A Real-Time Software Synthesizer That Uses Soundfont(tm)
+Des:
<!-- DT:Rich -->
<p>FluidSynth (formerly IIWU Synth) is based
on the SoundFont(tm) 2 specifications. It is a real-time "software
synthesizer". FluidSynth can read MIDI events from the MIDI input
device and render them to the audio device. It can also play MIDI
files.
</p>
-Des:
##----------------------------------------
=Pkg: fnfx 0.3 36 i586
=Sum: Support for Function Key Combinations on Toshiba Laptops
+Des:
<!-- DT:Rich -->
<p>FnFX enables owners of Toshiba laptops to change the LCD brightness,
control, the internal fan, and use the special keys on their keyboard
(Fn-x combinations, hotkeys). The internal functions give the
ability to map the Fn keys to functions like volume up and down, mute,
suspend to disk, suspend to RAM, and switch LCD/CRT/TV-out. These
functions heavily depend on the system and kernel configuration.
</p>
-Des:
##----------------------------------------
=Pkg: fontconfig 2.4.1 19 i586
=Sum: Library for Font Configuration
+Des:
<!-- DT:Rich -->
<p>The intention of this library is to be the central configuration interface for all
applications and libraries in the system.
</p>
-Des:
##----------------------------------------
=Pkg: fontconfig-devel 2.4.1 19 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>The intention is for this to be the central configuration interface for all
applications and libraries on the system.
</p>
-Des:
##----------------------------------------
=Pkg: fontforge 20061014 15 i586
=Sum: A Font Editor
+Des:
<!-- DT:Rich -->
<p>FontForge allows editing of outline and bitmap fonts. With it, you can create
new fonts or modify old ones. It also converts font formats and
can convert among PostScript (ASCII & binary Type 1, some Type 3s,
and some Type 0s), TrueType, OpenType (Type2), and CID-keyed fonts.
</p>
-Des:
##----------------------------------------
=Pkg: fonttools 2.0b1 277 i586
=Sum: Suite of Tools and Libraries for Manipulating Fonts
+Des:
<!-- DT:Rich -->
<p>FontTools is a suite of tools and libraries for manipulating fonts written in
Python.
</p><p>
It currently reads and writes TrueType font files, reads PostScript Type 1 fonts, and
more. It contains two command line programs to convert TrueType fonts to an XML based
format (called TTX) and back.
</p>
-Des:
##----------------------------------------
=Pkg: foomatic-filters 3.0.2 48 i586
=Sum: Filter Scripts Used by Printer Spoolers
+Des:
<!-- DT:Rich -->
<p>Filter scripts used by the printer spoolers to convert the incoming PostScript data into the printer's native format using a printer and driver-specific, but spooler-independent PPD file.
</p>
-Des:
##----------------------------------------
=Pkg: fortune 1.0 891 i586
=Sum: Random Saying
+Ins:
<!-- DT:Rich -->
<p>Together with a lot of funny sayings, fortune also contains some
sayings that may not be considered politically correct. These sayings
are included because SUSE does not want to apply any censorship
to fortune.
</p><p>
Not all users may appreciate all fortune sayings. Consider
not installing fortune in this case.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Fortune displays a random text string from a set of files in a certain
format.
</p><p>
This occurs each time you start a login shell. To get this feature
just uncomment the respective lines in the user's .profile.
</p>
-Des:
##----------------------------------------
=Pkg: fping 2.4b2 33 i586
=Sum: A Program to Ping Multiple Hosts
+Des:
<!-- DT:Rich -->
<p>FPing is a ping-like program that uses the Internet Control
Message Protocol (ICMP) echo request to determine if a target host is
responding. FPing differs from ping in that you can specify any
number of targets on the command line or specify a file containing a
list of targets to ping. Instead of sending pings to one target until
it times out or replies, FPing sends a ping packet and moves on
to the next target in a round-robin fashion.
</p><p>
In the default mode, if a target replies, it is noted and removed from
the list of targets to check. If a target does not respond within a
certain time limit or retry limit, it is designated as unreachable.
FPing also supports sending a specified number of pings to a target
or looping indefinitely (as in ping).
</p><p>
Unlike ping, FPing is meant to be used in scripts. Its output is
designed to be easy to parse.
</p>
-Des:
##----------------------------------------
=Pkg: freealut 1.1.0 12 i586
=Sum: freealut is a free implementation of OpenAL's ALUT standard
+Des:
<!-- DT:Rich -->
<p>freealut is a free implementation of OpenAL's ALUT standard.
</p>
-Des:
##----------------------------------------
=Pkg: freeciv 2.1.0 24 i586
=Sum: Free Civilization Clone
+Des:
<!-- DT:Rich -->
<p>A clone of the well known game Civilization by Microprose.
</p><p>
Every player is the leader of an imaginary nation. The aim of the game
can be to create a prospering civilization with commerce and knowledge
exchange or (more often) the extinction of all other civilizations.
</p><p>
To start a new game, first start the server 'civserver,' then start the
client 'civclient'. Have fun!
</p>
-Des:
##----------------------------------------
=Pkg: freeglut 060903 18 i586
=Sum: Freely Licensed Alternative to the GLUT Library
+Des:
<!-- DT:Rich -->
<p>freeglut is a completely open source alternative to the OpenGL Utility
Toolkit (GLUT) library. GLUT was originally written by Mark Kilgard to
support the sample programs in the second edition OpenGL
Redbook. Since then, GLUT has been used in a wide variety of
practical applications because it is simple, universally available, and
highly portable.
</p><p>
GLUT (and freeglut) allow the user to create and manage windows
containing OpenGL contexts and also read
the mouse, keyboard, and joystick functions on a wide range of platforms.
</p>
-Des:
##----------------------------------------
=Pkg: freeglut-devel 060903 18 i586
=Sum: Development Package for freeglut (GLUT Library)
+Des:
<!-- DT:Rich -->
<p>Freeglut (GLUT library) development package.
</p>
-Des:
##----------------------------------------
=Pkg: freeradius 1.1.3 26 i586
=Sum: Very Highly Configurable Radius Server
+Des:
<!-- DT:Rich -->
<p>The FreeRADIUS server has a number of features found in other
servers and additional features not found in any other server.
The server's features are:
<ul>
<li>Support for RFC and VSA attributes
</li><li>Additional server configuration attributes
</li><li>Selection of a particular configuration
</li><li>Authentication methods
</li><li>Accounting methods
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: freetype 1.3.1 1193 i586
=Sum: TrueType Font Engine
+Des:
<!-- DT:Rich -->
<p>A library for working with TrueType Fonts.
Documentation is in the /usr/share/doc/packages/freetype directory.
</p>
-Des:
##----------------------------------------
=Pkg: freetype-tools 1.3.1 1193 i586
=Sum: Bundled Tests, Demos and Tools for FreeType (Needed for CJK-LaTeX)
+Des:
<!-- DT:Rich -->
<p>Bundled tests, demos and tools for FreeType. Needed for CJK-LaTeX.
</p><p>
</p><p>
The FreeType engine is a free and portable TrueType font rendering
engine. It has been developed to provide TT support to a great variety
of platforms and environments.
</p><p>
</p><p>
This package contains several programs bundled with the FreeType
engine for testing and demonstration purposes as well as some
contributed utilities, such as ttf2pk, ttf2bdf, ttf2pfb, and ttfbanner.
</p>
-Des:
##----------------------------------------
=Pkg: freetype2 2.2.1.20061027 11 i586
=Sum: A TrueType Font Library
+Des:
<!-- DT:Rich -->
<p>This library features TrueType fonts for open source
projects. This version also contains an autohinter for producing
improved output.
</p>
-Des:
##----------------------------------------
=Pkg: freetype2-devel 2.2.1.20061027 11 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: freqtweak 0.6.1 53 i586
=Sum: Real-Time Audio Spectral Visualization
+Des:
<!-- DT:Rich -->
<p>FreqTweak is a tool for real-time audio spectral manipulation and
display. It provides several algorithms for processing audio data in
the frequency domain and a highly interactive GUI to manipulate the
associated filters for each algorithm. It also provides high-resolution
spectral displays in the form of scrolling-raster spectrograms and
energy versus frequency plots displaying both preprocessed and post-processed
spectra.
</p>
-Des:
##----------------------------------------
=Pkg: fribidi 0.10.4 519 i586
=Sum: Free Implementation of BiDi Algorithm
+Des:
<!-- DT:Rich -->
<p>This library implements the algorithm as described in the "Unicode
Standard Annex #9, the Bidirectional Algorithm,
http://www.unicode.org/unicode/reports/tr9/". FriBidi is exhaustively
tested against Bidi Reference Code and, to the best of the developers' knowledge, does not
contain any conformance bugs.
</p><p>
The API was inspired by the document "Bi-Di languages support -
BiDi API proposal" by Franck Portaneri, which he wrote as a proposal for
adding BiDi support to Mozilla.
</p>
-Des:
##----------------------------------------
=Pkg: fribidi-devel 0.10.4 519 i586
=Sum: Static Libraries and Header Files for FriBiDi
+Des:
<!-- DT:Rich -->
<p>This package provides the static libraries and header files for FriBiDi.
</p>
-Des:
##----------------------------------------
=Pkg: frink 2.2.2 85 i586
=Sum: Static Testing and Formatting for Tcl Programs
+Des:
<!-- DT:Rich -->
<p>Frink is a Tcl formatting and static check program. It can prettify
your program, and minimize, obfuscate, or sanity check it. It can also
do some rewriting.
</p><p>
See /usr/share/doc/packages/frink/README and the output of "frink -h" for details.
</p>
-Des:
##----------------------------------------
=Pkg: frozen-bubble 2.0.0 14 i586
=Sum: Puzzle with Bubbles
+Des:
<!-- DT:Rich -->
<p>Shoot up bubbles. Similar to the console game Puzzle-Bobble.
</p>
-Des:
##----------------------------------------
=Pkg: ft2demos 2.2.1.20061027 11 i586
=Sum: Freetype2 Utilities and Demo Programs
+Des:
<!-- DT:Rich -->
<p>Freetype2 utilities and demo programs.
</p>
-Des:
##----------------------------------------
=Pkg: ftgl 2.1.2 40 i586
=Sum: Library for Using Arbitrary Fonts in OpenGL Applications
+Des:
<!-- DT:Rich -->
<p>FTGL is a free open source library that enables developers to use arbitrary
fonts in their OpenGL (www.opengl.org) applications.
Unlike other OpenGL font libraries, FTGL uses standard font file formats
so does not need a preprocessing step to convert the high quality font data
into a lesser quality, proprietary format.
</p><p>
FTGL uses the Freetype (www.freetype.org) font library to open and 'decode'
the fonts. It then takes that output and stores it in a format that is most efficient
for OpenGL rendering.
</p><p>
Rendering modes supported are:<ul>
<li>Bit maps
</li><li>Antialiased Pix maps
</li><li>Texture maps
</li><li>Outlines
</li><li>Polygon meshes
</li><li>Extruded polygon meshes
</li></ul>
FTGL is designed to be used in commercial quality software. It has been
written with performance, robustness, and simplicity in mind.
</p>
-Des:
##----------------------------------------
=Pkg: ftwnn 1.1.1a017 578 i586
=Sum: Free tWnn Chinese Input System (Taiwan)
+Des:
<!-- DT:Rich -->
<p>Free tWnn Chinese input system (Taiwan).
</p>
-Des:
##----------------------------------------
=Pkg: fuse 2.6.0 9 i586
=Sum: Userspace File System
+Des:
<!-- DT:Rich -->
<p>With FUSE, a userspace program can export a file system through the Linux kernel.
</p><p>
To use fuse, you need an additional fuse module, like sshfs.
</p>
-Des:
##----------------------------------------
=Pkg: fuse_kio 0.0.cvs2005.12.08 46 i586
=Sum: Mount Any File System Supported by KDE
+Des:
<!-- DT:Rich -->
<p>fuse_kio is a bridge between the KIO file system design and FUSE, a program
to mount userspace file systems.
</p><p>
You can mount a KIO fs with this command:
</p><p>
fusermount <mountpath> fuse_kio <kio_kurl>
</p>
-Des:
##----------------------------------------
=Pkg: fvwm2 2.5.16 30 i586
=Sum: Improved Version of FVWM Window Manager
+Des:
<!-- DT:Rich -->
<p>FVWM is a virtual desktop window manager for
the X Window System.
</p><p>
FVWM is intended to have a small memory footprint but a rich
feature set, to be extremely customizable and extendible, and
to be very compatible with the Motif MWM.
</p>
-Des:
##----------------------------------------
=Pkg: fwnn 1.1.1a017 578 i586
=Sum: FreeWnn Japanese Input System--Server Only
+Des:
<!-- DT:Rich -->
<p>FreeWnn is a Kana-Kanji translation system, originally developed by a
joint project made up of Kyoto University, OMRON Corporation [formerly
known as Tateishi Electronics Co.], and ASTEC Inc. Further
development and maintenance is now done by the "FreeWnn Project"
(http://www.freewnn.org).
</p><p>
</p><p>
The name "Wnn", is an acronym for the Japanese sentence "Watashino
Namaeha Nakanodesu" (literally, it means "my name is Nakano."), and is
derived from a goal of the project: to develop a system powerful
enough to translate a whole sentence like that at once. The source
code has been written in C and is freely distributed. Consequently,
Wnn spread widely among workstation platforms, and became a de facto
standard as a Kana-Kanji translation system for UNIX operating
systems.
</p><p>
</p><p>
Wnn works in a client/server manner. The server portion of Wnn, or
jserver, is used as a Kana-Kanji translation engine for clients like
"xwnmo" and "kinput2" (input systems for the X Window System) or for
clients like "Egg", which are part of Mule (MUlti-Lingual Emacs) and
XEmacs.
</p><p>
</p><p>
This package contains only the Japanese server.
</p>
-Des:
##----------------------------------------
=Pkg: fwnncom 1.1.1a017 578 i586
=Sum: Common Files for FreeWnn
+Des:
<!-- DT:Rich -->
<p>This package includes files you need to run FreeWnn, Free cWnn, Free
tWnn, or Free kWnn. Install this package if you will be using any part
of the Wnn System.
</p>
-Des:
##----------------------------------------
=Pkg: fwnndev 1.1.1a017 578 i586
=Sum: Development Library and Header Files for FreeWnn
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and libraries for building
client programs which use FreeWnn for Japanese input.
</p>
-Des:
##----------------------------------------
=Pkg: fxload 2002_04_11 134 i586
=Sum: Download Firmware into USB FX and FX2 Devices
+Des:
<!-- DT:Rich -->
<p>This program can download firmware into FX and FX2
EZ-USB devices as well as the original AnchorChips EZ-USB. It is
intended to be invoked by hotplug scripts when the unprogrammed device
appears on the bus.
</p><p>
Primarily as an aid for developers, this can also be used to update
firmware on devices that boot from I2C serial EEPROMs. For that
use, as well as downloading firmware to all other off-chip memory,
a second stage loader must first be downloaded.
</p>
-Des:
##----------------------------------------
=Pkg: g-wrap 1.9.6 34 i586
=Sum: Guile Wrapper Generator
+Des:
<!-- DT:Rich -->
<p>G-Wrap is a tool (and guile library) for generating function wrappers
for interlanguage calls. It currently only supports generating Guile
wrappers for C functions. Other languages may be supported in the
future, possibly on both sides.
</p>
-Des:
##----------------------------------------
=Pkg: g3utils 1.1.33 37 i586
=Sum: Tools for the G3 (Fax) Graphics Format
+Des:
<!-- DT:Rich -->
<p>These utilities convert graphics files from the G3 format into the general-
purpose PBM format and back, so you can print or manipulate them.
G3 is used by fax modems and machines.
</p><p>
The g3utils are included in the mgetty source package.
</p>
-Des:
##----------------------------------------
=Pkg: gail 1.9.3 17 i586
=Sum: The GNOME Accessibility Implementation Library
+Des:
<!-- DT:Rich -->
<p>This package contains libgail, which is an implementation of accessibility interfaces on top of the ATK Library.
</p>
-Des:
##----------------------------------------
=Pkg: gail-devel 1.9.3 17 i586
=Sum: GNOME Accessibility Implementation Library
+Des:
<!-- DT:Rich -->
<p>This package contains libgail, which is an implementation of accessibility interfaces on top of the ATK library.
<p>Gaim allows you to talk to anyone using a variety of messaging
protocols, including AIM, ICQ, IRC, Yahoo!, Novell Groupwise,
MSN Messenger, Jabber, Gadu-Gadu, Napster, and Zephyr. These
protocols are implemented using a modular, easy-to-use design.
To use a protocol, just add an account using the account editor.
</p><p>
Gaim supports many common features of other clients as well as many
unique features, such as Perl scripting, TCL scripting and C plug-ins.
</p><p>
Gaim is not affiliated with or endorsed by America Online, Inc.,
Microsoft Corporation, Yahoo! Inc., or ICQ Inc.
</p>
-Des:
##----------------------------------------
=Pkg: gaim-otr 3.0.0 43 i586
=Sum: "Off The Record" end-to-end encryption plugin for gaim
+Des:
<!-- DT:Rich -->
<p>This is a gaim plugin which implements Off-the-Record (OTR) Messaging.
OTR allows you to have private conversations over IM by providing:<ul>
<li>Encryption
</li><li>No one else can read your instant messages.
</li><li>Authentication
</li><li>You are assured the correspondent is who you think it is.
</li><li>Deniability
</li><li>The messages you send do _not_ have digital signatures that are
checkable by a third party. Anyone can forge messages after a
conversation to make them look like they came from you. However,
_during_ a conversation, your correspondent is assured the messages
he sees are authentic and unmodified.
</li><li>Perfect forward secrecy
</li><li>If you lose control of your private keys, no previous conversation
is compromised.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: gamix 1.99.p14 77 i586
=Sum: GTK ALSA Audio Mixer
+Des:
<!-- DT:Rich -->
<p>A graphical mixer program for ALSA.
Its GUI is based on GTK+.
</p>
-Des:
##----------------------------------------
=Pkg: garlic 1.6 20 i586
=Sum: Molecular Graphics Visualization Tool
+Des:
<!-- DT:Rich -->
<p>Garlic is an X Window System tool intended for the molecular visualization of protein structure, DNA structure, and biological macromolecules. It reads Brookhaven Protein Database (PDB)
files.
</p>
-Des:
##----------------------------------------
=Pkg: gau 0.4.1 774 i586
=Sum: Korean Communication Program for the X Window System
+Des:
<!-- DT:Rich -->
<p>A Korean communication program for the X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: gawk 3.1.5 41 i586
=Sum: GNU awk
+Des:
<!-- DT:Rich -->
<p>GNU awk is upwardly compatible with the System V Release 4 awk. It is almost completely POSIX 1003.2 compliant.
</p>
-Des:
##----------------------------------------
=Pkg: gbuffy 0.2.6 66 i586
=Sum: Watcher for Multiple Mailboxes
+Des:
<!-- DT:Rich -->
<p>A nice watcher for multiple mailboxes. It can be configured through an
X11 front-end.
</p>
-Des:
##----------------------------------------
=Pkg: gcal 3.01 614 i586
=Sum: A Program for Printing Calendars
+Des:
<!-- DT:Rich -->
<p>Gcal is a program for printing calendars. Gcal displays a calendar for a month or a year, eternal holiday lists, and fixed date lists. The program correctly omits the dates that were skipped when the current Gregorian calendar replaced the earlier Julian calendar.
</p>
-Des:
##----------------------------------------
=Pkg: gcalctool 5.8.24 28 i586
=Sum: A GNOME Calculator Application
+Des:
<!-- DT:Rich -->
<p>A GNOME calculator package based on calctool and MP library.
</p>
-Des:
##----------------------------------------
=Pkg: gcc 4.1.3 29 i586
=Sum: The system GNU C Compiler
+Des:
<!-- DT:Rich -->
<p>The system GNU C Compiler.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-c++ 4.1.3 29 i586
=Sum: The system GNU C++ Compiler
+Des:
<!-- DT:Rich -->
<p>The system GNU C++ Compiler.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-gij 4.1.3 29 i586
=Sum: The system GNU Java bytecode interpreter
+Des:
<!-- DT:Rich -->
<p>The system GNU Java bytecode interpreter.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-info 4.1.3 29 i586
=Sum: The system GNU Compiler documentation
+Des:
<!-- DT:Rich -->
<p>The system GNU Compiler documentation.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-java 4.1.3 29 i586
=Sum: The system GNU Java Compiler
+Des:
<!-- DT:Rich -->
<p>The system GNU Java Compiler.
</p>
-Des:
##----------------------------------------
=Pkg: gcc41 4.1.2_20061115 5 i586
=Sum: The GNU C Compiler and Support Files
+Des:
<!-- DT:Rich -->
<p>Core package for the GNU Compiler Collection, including the C language frontend.
</p><p>
Language frontends other than C are split to different sub-packages,
namely gcc-ada, gcc-c++, gcc-fortran, gcc-java and gcc-objc.
</p>
-Des:
##----------------------------------------
=Pkg: gcc41-c++ 4.1.2_20061115 5 i586
=Sum: The GNU C++ Compiler
+Des:
<!-- DT:Rich -->
<p>This package contains the GNU compiler for C++.
</p>
-Des:
##----------------------------------------
=Pkg: gcc41-gij 4.1.2_20061115 7 i586
=Sum: Java bytecode Interpreter for gcc
+Des:
<!-- DT:Rich -->
<p>This package contains the java bytecode interpreter gij and related tools.
</p>
-Des:
##----------------------------------------
=Pkg: gcc41-info 4.1.2_20061115 5 i586
=Sum: GNU Info-Pages for GCC
+Des:
<!-- DT:Rich -->
<p>GNU info-pages for GCC.
</p>
-Des:
##----------------------------------------
=Pkg: gcc41-java 4.1.2_20061115 5 i586
=Sum: The GNU Java Compiler
+Des:
<!-- DT:Rich -->
<p>The Java compiler from the GCC-tools-suite.
</p>
-Des:
##----------------------------------------
=Pkg: gconf-editor 2.16.0 27 i586
=Sum: An Editor for the GCONF Database System
+Des:
<!-- DT:Rich -->
<p>Gconf-editor allows you to view and edit the values that are stored in the gconf database. This database is used for application settings in the GNOME 2.x Desktop Environment.
</p>
-Des:
##----------------------------------------
=Pkg: gconf-sharp 1.0.10 60 i586
=Sum: Mono bindings for gconf
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for gconf and gconf peditors.
</p>
-Des:
##----------------------------------------
=Pkg: gconf-sharp2 2.8.3 33 i586
=Sum: Mono bindings for gconf
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for gconf and gconf peditors.
</p>
-Des:
##----------------------------------------
=Pkg: gconf2 2.14.0 23 i586
=Sum: The GNOME 2.x Desktop Configuration Database System
+Des:
<!-- DT:Rich -->
<p>This is the development version of GConf, the GNOME configuration database. It is used by the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: gconf2-devel 2.14.0 23 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gconf2-doc 2.14.0 23 i586
=Sum: The GNOME 2.x Desktop Configuration Database System
+Des:
<!-- DT:Rich -->
<p>This is the development version of GConf, the GNOME configuration database. It is used by the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: gd 2.0.32 49 i586
=Sum: A Drawing Library for Programs That Use PNG and JPEG Output
+Des:
<!-- DT:Rich -->
<p>Gd allows your code to quickly draw images complete with lines, arcs,
text, and multiple colors. It supports cut and paste from other images and
flood fills. It outputs PNG, JPEG, and WBMP (for wireless devices) and is
supported by PHP4.
</p>
-Des:
##----------------------------------------
=Pkg: gdb 6.5 28 i586
=Sum: The GNU Debugger
+Des:
<!-- DT:Rich -->
<p>You can use GDB to debug programs written in C, C++, Ada, and Modula-2.
GNU Fortran 77 support is also partially included.
</p>
-Des:
##----------------------------------------
=Pkg: gdbm 1.8.3 261 i586
=Sum: GNU Database Routines
+Des:
<!-- DT:Rich -->
<p>A static and dynamic library for the GNU database routines.
</p>
-Des:
##----------------------------------------
=Pkg: gdbm-devel 1.8.3 261 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gdk-pixbuf 0.22.0 116 i586
=Sum: A Library for Fast Pixel Manipulation
+Des:
<!-- DT:Rich -->
<p>With this library you can create, change, scale, and move pixel data
very efficiently.
</p>
-Des:
##----------------------------------------
=Pkg: gdk-pixbuf-gnome 0.22.0 116 i586
=Sum: A Library for Fast Pixel Manipulation
+Des:
<!-- DT:Rich -->
<p>With this library you can create, change, scale, and move pixel data
very efficiently.
</p>
-Des:
##----------------------------------------
=Pkg: gdm 2.16.1 36 i586
=Sum: The GNOME 2.x Display Manager
+Des:
<!-- DT:Rich -->
<p>This version of GDM, the GNOME display manager, is based on GTK2 and is suited for the GNOME 2.x Desktop. GDM is a flexible X Window System display manager that has many options, is usable for remote login, and provides a good looking graphical interface.
</p>
-Des:
##----------------------------------------
=Pkg: gedit 2.16.1 28 i586
=Sum: The Editor for the GNOME 2.x Desktop
+Des:
<!-- DT:Rich -->
<p>Gedit is a small, fast, and reliable editor for the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: gettext 0.15 22 i586
=Sum: Tools for Native Language Support (NLS)
+Des:
<!-- DT:Rich -->
<p>This package contains the intl library as well as tools that ease the
creation and maintenance of message catalogs. With it, you can extract
strings from source code. The supplied Emacs mode (po-mode.el) aids in
editing these catalogs (called PO files, for portable object) and
adding translations. A special compiler turns these PO files into
binary catalogs.
</p>
-Des:
##----------------------------------------
=Pkg: gettext-devel 0.15 22 i586
=Sum: Tools for Native Language Support (NLS)
+Des:
<!-- DT:Rich -->
<p>This package contains the `intl' library as well as tools that ease the
creation and maintenance of message catalogs. With it you can extract strings from
source code. The supplied Emacs mode (po-mode.el) will aid in editing these
catalogs (called PO files, for portable object) and add translations. A
special compiler will turn these PO files into binary catalogs.
</p>
-Des:
##----------------------------------------
=Pkg: gftp 2.0.18 48 i586
=Sum: Multithreaded FTP Client for X11
+Des:
<!-- DT:Rich -->
<p>GFTP is a multithreaded FTP client for X11 written
using Gtk. It has the following features:
simultaneous downloads, resume of interrupted file
transfers, file transfer queues, download of entire
<p>This package contains all start-up files for calling gs (Ghostscript).
</p><p>
Find some useful documentation about a few printer drivers
in the directory:
</p><p>
/usr/share/ghostscript/8.15/doc/
</p><p>
Read the files use.txt, devices.txt, and, for the experimental
drivers cdj670, cdj850, cdj890, and cdj1600, the file readme.hp8
in the subdirectory hp8xx/.
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-x11 8.15.3 24 i586
=Sum: Ghostscript for the X Window System
+Des:
<!-- DT:Rich -->
<p>If you plan to preview PostScript documents under the X Window System you need to
install this.
</p>
-Des:
##----------------------------------------
=Pkg: giflib 4.1.4 34 i586
=Sum: A Library for Working with GIF Images
+Des:
<!-- DT:Rich -->
<p>Since the LZW patents have expired, giflib can again be used
instead of libungif.
</p>
-Des:
##----------------------------------------
=Pkg: giflib-devel 4.1.4 34 i586
=Sum: Library for Working with GIF Images - Files Mandatory for Development
+Des:
<!-- DT:Rich -->
<p>Since the LZW patents have expired, giflib can again be used
instead of libungif.
</p>
-Des:
##----------------------------------------
=Pkg: gimp 2.2.13 29 i586
=Sum: The GNU Image Manipulation Program
+Des:
<!-- DT:Rich -->
<p>The GIMP (GNU Image Manipulation Program) is a powerful image
composition and editing program, which can be extremely useful for
creating logos and other graphics for Web pages. The GIMP has many of
the tools and filters you would expect to find in similar commercial
offerings and some interesting extras as well. The GIMP provides a
large image manipulation toolbox, including channel operations and
layers, effects, subpixel imaging and antialiasing, and conversions,
all with multilevel undo.
</p><p>
The GIMP includes a scripting facility, but many of the included
scripts rely on fonts that we cannot distribute. The GIMP FTP site
has a package of fonts that you can install by yourself, which
includes all the fonts needed to run the included scripts. Some of
the fonts have unusual licensing requirements; all the licenses are
documented in the package. Get
ftp://ftp.gimp.org/pub/gimp/fonts/freefonts-0.10.tar.gz and
ftp://ftp.gimp.org/pub/gimp/fonts/sharefonts-0.10.tar.gz if you are so
inclined. Alternatively, choose fonts which exist on your system
before running the scripts.
</p><p>
Install the GIMP if you need a powerful image manipulation
program.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-cmyk 0.3 50 i586
=Sum: Plug-In Providing CMYK Support for The GIMP
+Ins:
<!-- DT:Rich -->
<p>To be able to use this plug-in, you need ICC profiles, which can be downloaded from Adobe, colorspace-related pages, your printer manufacturer, or a color calibration company. For legal reasons, those files are not distributed with this plug-in.
</p><p>
The default path for profiles is /opt/gnome/share/iccprofiles.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>The CMYK GIMP plug-in allows RGB to CMYK separation within the GIMP, using littlecms for color management, and allows the result to be saved as a CMYK TIFF.
</p><p>
This package contains the plug-in built for The GIMP 2.0.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-devel 2.2.13 29 i586
=Sum: GIMP Plugin and Extension Development Kit
+Des:
<!-- DT:Rich -->
<p>Install gimp-devel if you're going to create plug-ins and/or
extensions for the GIMP.
</p>
-Des:
##----------------------------------------
=Pkg: git-core 1.4.3.4 5 i586
=Sum: git-core--a Source Code Management Tool
+Des:
<!-- DT:Rich -->
<p>This is an extremely fast directory content manager.
It is intended to be the base of an efficient, distributed source
code management system. This package includes rudimentary tools
that can be used as a SCM, but you should look elsewhere for tools
for ordinary humans layered on top of this.
</p>
-Des:
##----------------------------------------
=Pkg: gjiten 2.5.20060907 27 i586
=Sum: Japanese Dictionary Browser for GNOME/GTK+
+Des:
<!-- DT:Rich -->
<p>Gjiten is a GNOME-based Japanese dictionary program. It uses some of
the xjdic code written by Jim Breen and his dictionary files. Gjiten
also has a kanji dictionary. Any combination of stroke count, radicals,
and search key can be used for kanji lookups. It requires a working X
input method (such as kinput2) for Japanese input.
</p>
-Des:
##----------------------------------------
=Pkg: glade 2.12.1 46 i586
=Sum: Glade is a GTK2+ User Interface Builder
+Des:
<!-- DT:Rich -->
<p>Glade is a free user interface builder for GTK+ 2.x and the GNOME 2.x Desktop Platform.
</p>
-Des:
##----------------------------------------
=Pkg: glade-sharp 1.0.10 60 i586
=Sum: Mono bindings for glade
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for glade.
</p>
-Des:
##----------------------------------------
=Pkg: glade-sharp2 2.8.3 33 i586
=Sum: Mono bindings for glade
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for glade.
</p>
-Des:
##----------------------------------------
=Pkg: glchess 0.4.7 198 i586
=Sum: 3D Chess Game
+Des:
<!-- DT:Rich -->
<p>At the moment, it supports computer play against crafty.
</p>
-Des:
##----------------------------------------
=Pkg: gle 3.0.6 685 i586
=Sum: The GLE Tubing and Extrusion Library
+Des:
<!-- DT:Rich -->
<p>The GLE Tubing and Extrusion Library is a graphics application programming
interface (API). The library consists of a number of C language
subroutines for drawing tubing and extrusions. The library is distributed in
source code form in a package that includes documentation, a VRML proposal,
make files, and full source code and header files. It uses the OpenGL (TM)
programming API to perform the actual drawing of the tubing and extrusions.
</p>
-Des:
##----------------------------------------
=Pkg: glib 1.2.10 627 i586
=Sum: The Utility Functions for Gtk
+Des:
<!-- DT:Rich -->
<p>A library of utility functions for Gtk.
</p>
-Des:
##----------------------------------------
=Pkg: glib-devel 1.2.10 627 i586
=Sum: Static Libraries and Header Files for GLib
+Des:
<!-- DT:Rich -->
<p>Only needed by developers that want to use functions contained in GLib.
</p>
-Des:
##----------------------------------------
=Pkg: glib-sharp 1.0.10 60 i586
=Sum: Mono bindings for glib
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for glib.
</p>
-Des:
##----------------------------------------
=Pkg: glib-sharp2 2.8.3 33 i586
=Sum: Mono bindings for glib
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for glib.
</p>
-Des:
##----------------------------------------
=Pkg: glib2 2.12.4 15 i586
=Sum: A Library with Convenient Functions Written in C
+Des:
<!-- DT:Rich -->
<p>This library provides convenient functions, such as lists and
hashes, to a C programmer and is used by Gtk+ and GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: glib2-devel 2.12.4 15 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: glib2-doc 2.12.4 15 i586
=Sum: A C Library with Convenience Functions
+Des:
<!-- DT:Rich -->
<p>This library provides convenient functions, such as lists and
hashes, to a C programmer, and is used by Gtk+ and GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: glibc 2.5 25 i586
=Sum: Standard Shared Libraries (from the GNU C Library)
+Del:
<!-- DT:Rich -->
<p>This package is required for proper operation
and management of your Linux system.
</p><p>
Remove it only if you know what
you are doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>The GNU C Library provides the most important standard libraries
used by nearly all programs: the standard C library, the standard
math library, and the POSIX thread library. A system is not functional without these libraries.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-devel 2.5 25 i586
=Sum: Include Files and Libraries Mandatory for Development
+Des:
<!-- DT:Rich -->
<p>These libraries are needed to develop programs which
use the standard C library.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-html 2.5 25 i586
=Sum: HTML Documentation for the GNU C Library
+Des:
<!-- DT:Rich -->
<p>This package contains the HTML documentation for the GNU C library.
Due to a lack of resources, this documentation is not complete
and is partially out of date.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-i18ndata 2.5 25 i586
=Sum: Database Sources for 'locale'
+Des:
<!-- DT:Rich -->
<p>This package contains the data needed to build the locale data
files to use the internationalization features of the GNU libc.
It is normally not necessary to install this packages, the data
files are already created.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-info 2.5 25 i586
=Sum: Info Files for the GNU C Library
+Des:
<!-- DT:Rich -->
<p>This package contains the documentation for the GNU C library stored as
info files. Due to a lack of resources, this documentation is not
complete and is partially out of date.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-locale 2.5 25 i586
=Sum: Locale Data for Localized Programs
+Des:
<!-- DT:Rich -->
<p>Locale data for the internationalisation features of the GNU C library.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-obsolete 2.5 25 i586
=Sum: Obsolete Shared Libraries from the GNU C Library
+Des:
<!-- DT:Rich -->
<p>This package provides some old libraries from the GNU C Library which
are no longer supported. Additional it provides a compatibility library
for old binaries linked against glibc 2.0.
</p><p>
Install this package if you need one of this libraries to get old binaries working, but since this libraries are not supported and there is no gurantee that they work for you, you should try to get newer versions of your software.
</p>
-Des:
##----------------------------------------
=Pkg: glibmm2 2.12.2 11 i586
=Sum: C++ Interface for GLib2
+Des:
<!-- DT:Rich -->
<p>Gtkmm provides a C++ interface to the GTK+ GUI library. glibmm24 wraps GLib 2.
Highlights include typesafe callbacks, widgets extensible via inheritance,
and a comprehensive set of widget classes that can be freely combined to
quickly create complex user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: glibmm2-devel 2.12.2 11 i586
=Sum: C++ Interface for GLib2
+Des:
<!-- DT:Rich -->
<p>Gtkmm provides a C++ interface to the GTK+ GUI library. glibmm24 wraps GLib 2.
Highlights include typesafe callbacks, widgets extensible via inheritance
and a comprehensive set of widget classes that can be freely combined to
quickly create complex user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: glitz 0.5.6 21 i586
=Sum: Glitz--OpenGL Image Compositing Library
+Des:
<!-- DT:Rich -->
<p>Glitz is an OpenGL image compositing library. Glitz provides
Porter/Duff compositing of images and implicit mask generation for
geometric primitives, including trapezoids, triangles, and rectangles.
</p><p>
The semantics of Glitz are designed to precisely match the
specification of the X Render extension. Glitz not only implements
X Render features, like component alpha and image transformations, but
also support for additional features like convolution filters and color
gradients, which are not currently part of the X Render specification.
</p><p>
The performance and capabilities of Glitz are very dependent on
graphics hardware. Glitz does not in any way handle software
fallbacks when graphics hardware is insufficient. However, it
will report if any requested operation cannot be carried out by
graphics hardware, making a higher level software layer
responsible for appropriate actions.
</p>
-Des:
##----------------------------------------
=Pkg: glitz-devel 0.5.6 21 i586
=Sum: glitz - OpenGL image compositing library
+Des:
<!-- DT:Rich -->
<p>Glitz is an OpenGL image compositing library. Glitz provides
Porter/Duff compositing of images and implicit mask generation for
geometric primitives including trapezoids, triangles, and rectangles.
</p><p>
The semantics of glitz are designed to precisely match the
specification of the X Render extension. Glitz does not only implement
X Render features like component alpha and image transformations, but
also support for additional features like convolution filters and color
gradients, which are not currently part of the X Render specification.
</p><p>
The performance and capabilities of glitz are much dependent on
graphics hardware. Glitz does not in any way handle software
fall-backs when graphics hardware is insufficient. However, glitz
will report if any requested operation cannot be carried out by
graphics hardware, hence making a higher level software layer
responsible for appropriate actions.
</p>
-Des:
##----------------------------------------
=Pkg: gltt 2.5.2 505 i586
=Sum: Library for TrueType with OpenGL Applications
+Des:
<!-- DT:Rich -->
<p>gltt is a library that allows you to read and draw TrueType fonts in
any OpenGL application.
</p><p>
It supports bitmapped and antialiased font drawing as well as
vectorized and polygonized drawing.
</p>
-Des:
##----------------------------------------
=Pkg: gmime 2.2.3 20 i586
=Sum: MIME Library
+Des:
<!-- DT:Rich -->
<p>GMime is a set of utilities for parsing and creating messages using
the Multipurpose Internet Mail Extension (MIME).
</p>
-Des:
##----------------------------------------
=Pkg: gmime-devel 2.2.3 20 i586
=Sum: MIME Library
+Des:
<!-- DT:Rich -->
<p>GMime is a set of utilities for parsing and creating messages using
the Multi-purpose Internet Mail Extension (MIME).
</p>
-Des:
##----------------------------------------
=Pkg: gmp 4.2.1 13 i586
=Sum: The GNU MP Library
+Des:
<!-- DT:Rich -->
<p>A library for calculating huge numbers (integer and floating point).
</p>
-Des:
##----------------------------------------
=Pkg: gmp-devel 4.2.1 13 i586
=Sum: Include Files and Libraries for Development with the GNU MP Library
+Des:
<!-- DT:Rich -->
<p>These libraries are needed to develop programs which calculate with huge numbers (integer and floating point).
</p>
-Des:
##----------------------------------------
=Pkg: gnet 2.0.7 49 i586
=Sum: Network Library for GLib-Based Programs
+Des:
<!-- DT:Rich -->
<p>GNet is a simple network library. It is written in C,
object-oriented, and built upon GLib. It is intended
to be easy to use and port.
</p>
-Des:
##----------------------------------------
=Pkg: gnokii 0.6.14 25 i586
=Sum: Nokia Connectivity Program
+Des:
<!-- DT:Rich -->
<p>gnokii is a package of programs for communicating with a Nokia cellular phone
in Linux. Read the READMEs in /usr/share/doc/packages/gnokii
to find out which models are supported.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-applets 2.16.1 33 i586
=Sum: A Collection of Useful Programs for the GNOME 2.x Desktop Panel
+Des:
<!-- DT:Rich -->
<p>This package is part of the basic GNOME 2.x Desktop packages. It includes many small utilities that can be run from within the GNOME 2.x Desktop panel.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-backgrounds 2.16.1 14 i586
=Sum: GNOME Backgrounds
+Des:
<!-- DT:Rich -->
<p>Background images from the GNOME project.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-blog 0.9.1 36 i586
=Sum: A GNOME Panel Applet for Posting to bloggerAPI-Compatible Blogs
+Des:
<!-- DT:Rich -->
<p>gnome-blog is a panel object (applet) that can post to
bloggerAPI compatible blogs including blogger.com, pyblosxom,
and moveable-type.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-bluetooth 0.8.0 26 i586
=Sum: GNOME Bluetooth Support
+Des:
<!-- DT:Rich -->
<p>This package contains a controller class, GnomebtController, to control
Bluetooth devices and a simple GUI to explore which devices are
available (gnome-bluetooth-manager). An OBEX server is available,
gnome-obex-server. This receives files sent via Bluetooth to your
PC and saves them in your home directory. The program gnome-obex-send
enables you to send files. It is used by the Nautilus
component--select the files to send and choose "Send via Bluetooth"
from the context menu.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-cups-manager 0.32cvs20060120 71 i586
=Sum: GNOME CUPS Printer Manager
+Des:
<!-- DT:Rich -->
<p>CUPS printer manager for GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-desktop 2.16.1 28 i586
=Sum: The GNOME Desktop API Library
+Des:
<!-- DT:Rich -->
<p>This package contains the libgnome-desktop library that
contains APIs that really belong in libgnome/libgnomeui but have not
seen enough testing or development to be considered stable. Use them at
your own risk.
</p><p>
Also contained here are documents installed as part of the
core GNOME distribution: the GPL, GNOME's .desktop files, the
gnome-about program, some man pages, and GNOME's core graphics files and
icons.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-desktop-devel 2.16.1 28 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-doc-utils 0.8.0 22 i586
=Sum: A Collection of Documentation Utilities for GNOME
+Des:
<!-- DT:Rich -->
<p>The gnome-doc-utils package is a collection of documentation utilities for the GNOME
project. Notably, it contains utilities for building documentation and
all auxiliary files in your source tree. It also contains the DocBook
XSLT stylesheets that were once distributed with Yelp. Starting with
GNOME 2.8, Yelp requires gnome-doc-utils for XSLT.
</p><p>
It also contains the Python program <tt>xml2po</tt> that extracts translatable content
from XML documents and outputs gettext-compatible POT
files.
For simple tags, it works out-of-the-box. For complicated
tags, provide a list of all tags that are considered "final"
(tags with contents that should be put into one "message" in
the POT file), "ignored" (skipped over), and "space preserving".
</p><p>
Sane defaults are available for DocBook documents and other
common document types (like GNOME Summaries and XHTML). For other kinds
of documents, it is possible to use -a (--automatic-tags) to choose
suitable translatable pieces.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-doc-utils-devel 0.8.0 22 i586
=Sum: A Collection of Documentation Utilities for GNOME
+Des:
<!-- DT:Rich -->
<p>The gnome-doc-utils package is a collection of documentation utilities for the GNOME
project. Notably, it contains utilities for building documentation and
all auxiliary files in your source tree. It also contains the DocBook
XSLT stylesheets that were once distributed with Yelp. Starting with
GNOME 2.8, Yelp requires gnome-doc-utils for XSLT.
</p><p>
It also contains the Python program <tt>xml2po</tt> that extracts translatable content
from XML documents and outputs gettext-compatible POT
files.
For simple tags, it works out-of-the-box. For complicated
tags, provide a list of all tags that are considered "final"
(tags with contents that should be put into one "message" in
the POT file), "ignored" (skipped over), and "space preserving".
</p><p>
Sane defaults are available for DocBook documents and other
common document types (like GNOME Summaries and XHTML). For other kinds
of documents, it is possible to use -a (--automatic-tags) to choose
suitable translatable pieces.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-filesystem 0.1 288 i586
=Sum: GNOME Directory Layout
+Des:
<!-- DT:Rich -->
<p>This package installs the GNOME directory structure.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-games 2.16.1 27 i586
=Sum: Games for the GNOME 2.x Desktop
+Des:
<!-- DT:Rich -->
<p>This package contains a number of small games for the GNOME 2.x Desktop. Gnome-games is part
of the standard GNOME packages.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring 0.6.0 18 i586
=Sum: GNOME Keyring Password Manager
+Des:
<!-- DT:Rich -->
<p>GNOME Keyring Manager is a program that keeps passwords and other secrets for
users. It is run as a daemon in the session, similar to ssh-agent, and
other applications can locate it by an environment variable.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring-devel 0.6.0 18 i586
=Sum: GNOME Keyring Password Manager
+Des:
<!-- DT:Rich -->
<p>GNOME Keyring Manager is a program that keeps passwords and other secrets for
users. It is run as a daemon in the session, similar to ssh-agent, and
other applications can locate it by an environment variable.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring-manager 2.16.0 29 i586
=Sum: GNOME Keyring Password Manager
+Des:
<!-- DT:Rich -->
<p>GNOME Keyring Manager is a program that keeps passwords and other
secrets for users. It is run as a daemon in the session, similar to
ssh-agent, and other applications can locate it by an environment
variable.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-libs 1.4.1.7 733 i586
=Sum: The GNOME Base Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the basic GNOME libraries.
</p><p>
GNOME itself contains no specific window manager.
Many GNOME users like Sawfish, Enlightenment, or
IceWM as a window manager for GNOME (see those packages).
</p>
-Des:
##----------------------------------------
=Pkg: gnome-mag 0.13.1 24 i586
=Sum: GNOME Screen Magnifier
+Des:
<!-- DT:Rich -->
<p>gnome-mag provides a command line interface for stand-alone use,
although its primary goal is to provide a set of magnification
services for use by other client applications and assistive
technologies.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-main-menu 0.6.3 47 i586
=Sum: The GNOME Desktop Menu
+Des:
<!-- DT:Rich -->
<p>The GNOME Desktop Menu and Application Browser.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-main-menu-devel 0.6.3 47 i586
=Sum: The GNOME Desktop Menu
+Des:
<!-- DT:Rich -->
<p>The GNOME Desktop Menu and Application Browser.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-media 2.16.1 30 i586
=Sum: GNOME Multimedia (Media)
+Des:
<!-- DT:Rich -->
<p>This package contains multimedia programs for GNOME.
</p><p>
Documentation:
</p><p>
GNOME online help
/usr/share/doc/packages/gnome
</p>
-Des:
##----------------------------------------
=Pkg: gnome-media-cd 2.16.1 30 i586
=Sum: GNOME Multimedia CD Player(Media)
+Des:
<!-- DT:Rich -->
<p>This package contains the GNOME CD player
</p>
-Des:
##----------------------------------------
=Pkg: gnome-media-devel 2.16.1 30 i586
=Sum: GNOME Multimedia (Media)
+Des:
<!-- DT:Rich -->
<p>This package contains multimedia programs for GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-menus 2.16.1 25 i586
=Sum: The GNOME Desktop Menu
+Des:
<!-- DT:Rich -->
<p>This package is free software and is part of the GNOME project.
</p><p>
The package contains an implementation of the draft "Desktop Menu Specification" from freedesktop.org:
</p><p>
http://www.freedesktop.org/Standards/menu-spec
</p><p>
Also contained here are the GNOME menu layout configuration files, .directory files, and assorted menu-related utility programs.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-menus-devel 2.16.1 25 i586
=Sum: The GNOME Desktop Menu
+Des:
<!-- DT:Rich -->
<p>This package is free software and is part of the GNOME project.
</p><p>
The package contains an implementation of the draft "Desktop Menu Specification" from freedesktop.org:
</p><p>
http://www.freedesktop.org/Standards/menu-spec
</p><p>
Also contained here are the GNOME menu layout configuration files, .directory files, and assorted menu-related utility programs.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-mount 0.5 3 i586
=Sum: The GNOME Mount Program
+Des:
<!-- DT:Rich -->
<p>The GNOME Volume Manager monitors volume-related events and responds
using a user-specified policy. The GNOME Volume Manager can automount
programs, automatically play audio CDs and video DVDs, and
automatically import photos from a digital camera. The GNOME Volume
Manager does this entirely in userspace and without polling.
</p><p>
The GNOME Volume Manager sits at the top end of a larger picture that
aims to integrate the Linux system from the kernel on up through the
desktop and its applications.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-netstatus 2.12.0 49 i586
=Sum: Network Information Applet for GNOME
+Des:
<!-- DT:Rich -->
<p>This package contains an applet that provides information about a network interface on your panel.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-nettool 2.16.0 25 i586
=Sum: GNOME Interface for Various Networking Tools
+Des:
<!-- DT:Rich -->
<p>GNOME Nettool is a set of front-ends to various networking command line tools, like ping, netstat, ifconfig, whois, traceroute, and finger.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-panel 2.16.1 30 i586
=Sum: The GNOME 2.x Desktop Panel
+Des:
<!-- DT:Rich -->
<p>This package contains the GNOME 2.x Desktop Panel. The panel is an easy-to-use and functional interface to manage your desktop, start programs, and organize access to your data.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-panel-devel 2.16.1 30 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-panel-doc 2.16.1 30 i586
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>This package contains optional documentation provided in addition to this package's base documentation.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-phone-manager 0.8 28 i586
=Sum: Phone Manager for GNOME
+Des:
<!-- DT:Rich -->
<p>This program connects to your mobile phone over a serial port with a cable, infrared, or Bluetooth connection.
</p><p>
It listens for text messages and, when they arrive, displays them on the desktop. A visual indicator is displayed in the notification area, if available, in the panel.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-pilot 2.0.14 27 i586
=Sum: GNOME PalmPilot Programs
+Des:
<!-- DT:Rich -->
<p>gnome-pilot is a collection of programs and daemon for integrating
GNOME and the PalmPilot<tm> or other PalmOS<tm> devices.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-pilot-conduits 2.0.14 29 i586
=Sum: A Collection of Additional Pilot Conduits for GNOME
+Des:
<!-- DT:Rich -->
<p>gnome-pilot is a collection of programs and a daemon for integrating
GNOME and the Palm Pilot<tm>.
</p><p>
This is a collection of additional conduits for gnome-pilot.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-pilot-devel 2.0.14 27 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-power-manager 2.16.1 30 i586
=Sum: Power Management for GNOME
+Des:
<!-- DT:Rich -->
<p>GNOME Power Manager is a session daemon that takes care of power management.
</p><p>
GNOME Power Manager uses information provided by HAL to display icons and
handle system and user actions in a GNOME session. Authorized users can set
policy and change preferences.
</p><p>
GNOME Power Manager acts as a policy agent on top of the Project Utopia stack,
which includes the kernel, hotplug, udev, and HAL. GNOME Power Manager listens
for HAL events and responds with user-configurable reactions.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-printer-add 1.0.1 45 i586
=Sum: Utility to Add a New Printer to GNOME
+Des:
<!-- DT:Rich -->
<p>Utility program to decide if a hotplugged printer is "new" and therefore needs to be configured.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-python-desktop 2.16.0 36 i586
=Sum: Python modules for GNOME
+Des:
<!-- DT:Rich -->
<p>This package contains a few python modules that used to live in gnome-python-extras:
<ul>
<li>gnomeapplet
</li><li>gnomeprint, gnomeprint.ui
</li><li>gtksourceview
</li><li>wnck
</li><li>totem.plparser
</li><li>gtop
</li><li>nautilusburn
</li><li>mediaprofiles
</li><li>metacity
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: gnome-reset 0.1.1 45 i586
=Sum: Back Up and Reset GNOME Settings
+Des:
<!-- DT:Rich -->
<p>Allows users to back up or reset their GNOME settings. The settings are backed up to a single file so users can send their settings.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-screensaver 2.16.1 28 i586
=Sum: GNOME Screen Saver and Locker
+Des:
<!-- DT:Rich -->
<p>gnome-screensaver is a screen saver and locker that aims to have
simple, sane, secure defaults and be well integrated with the desktop.
It is designed to support:
<ul>
<li>The ability to lock down configuration settings
</li><li>Translation into other languages
</li><li>User switching
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: gnome-session 2.16.1 30 i586
=Sum: Session Tools for the GNOME 2.x Desktop
+Des:
<!-- DT:Rich -->
<p>This package provides the basic session tools, like session management functionality, for the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-sharp 1.0.10 60 i586
=Sum: Mono bindings for Gnome.
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for gnome.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-sharp2 2.8.3 33 i586
=Sum: Mono bindings for Gnome.
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for Gnome.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-speech 0.4.5 27 i586
=Sum: GNOME Speech API
+Des:
<!-- DT:Rich -->
<p>The GNOME Speech 1.0 API is currently under development. It will
provide API for both text-to-speech output and speech input.
It will be heavily influenced by the Java Speech API, both the
existing 1.0 specification and the new 2.0 one, which is currently
under development.
</p><p>
This package of GNOME Speech provides a driver for the Festival Speech Synthesizer.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-spell2 1.0.7 27 i586
=Sum: Bonobo Spelling Component
+Des:
<!-- DT:Rich -->
<p>The GNOME/Bonobo spelling component.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-system-monitor 2.16.1 25 i586
=Sum: A Simple Process Monitor
+Des:
<!-- DT:Rich -->
<p>GNOME-system-monitor (formerly Procman) is a simple process and system monitor for the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-terminal 2.16.1 26 i586
=Sum: The GNOME 2.x Desktop Terminal
+Des:
<!-- DT:Rich -->
<p>This package contains the GNOME 2.x Desktop Terminal program. It is handy for quick tasks on the command line.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-utils 2.16.1 30 i586
=Sum: Basic Utilities for the GNOME 2.x Desktop
+Des:
<!-- DT:Rich -->
<p>This package contains some essential utilities for the GNOME 2.x Desktop,
such as the search tool and system information overview tool.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs-sharp2 2.8.3 33 i586
=Sum: Mono bindings for gnomevfs
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings gnomevfs.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs2 2.16.1 23 i586
=Sum: The GNOME 2.x Desktop Virtual File System Libraries
+Des:
<!-- DT:Rich -->
<p>GNOME VFS is the GNOME virtual file system. It is the foundation of the
Nautilus file manager. It provides a modular architecture and ships with
several modules that implement support for file systems, HTTP, FTP, and others.
It provides a URI-based API, a back-end supporting asynchronous file operations,
a MIME type manipulation library, and other features.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs2-devel 2.16.1 23 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs2-doc 2.16.1 23 i586
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>GNOME VFS is the GNOME virtual file system. It is the foundation for the
Nautilus file manager. It provides a modular architecture and ships with
several modules that implement support for file systems, HTTP, FTP, and more.
It provides a URI-based API, a back-end that supports asynchronous file operations,
a MIME type manipulation library, and other features.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-volume-manager 2.17.0 7 i586
=Sum: The GNOME Volume Manager
+Des:
<!-- DT:Rich -->
<p>The GNOME Volume Manager monitors volume-related events and responds using a
user-specified policy. The GNOME Volume Manager can automount hotplugged
play audio CDs and video DVDs, and automatically import photos from a digital
camera. The GNOME Volume Manager does this entirely in user space and without
polling.
</p><p>
The GNOME Volume Manager sits at the top end of a larger picture that aims to
integrate the Linux system from the kernel up through the desktop and its
applications.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-web-photo 0.2 28 i586
=Sum: GNOME Web Photographer
+Des:
<!-- DT:Rich -->
<p>GNOME Web Photographer is a tool to generate full-size image
files and thumbnails from HTML files and web pages.
</p>
-Des:
##----------------------------------------
=Pkg: gnomeicu 0.99.10 32 i586
=Sum: An ICQ Clone for the GNOME Desktop
+Des:
<!-- DT:Rich -->
<p>GnomeICU (previously GtkICQ) is an Internet-based communications program
that uses the ICQ protocol. GnomeICU also uses GNOME,
a growingly popular desktop environment. GnomeICU is released under the
GNU Public License and is available free of charge.
</p><p>
This package also uses Gnet, a network library, which is included.
Gnet is a simple network library. It is written in C, object oriented,
and built on GLib. It is intended to be small, fast, easy to use,
and easy to port.
</p>
-Des:
##----------------------------------------
=Pkg: gnopernicus 1.1.2 28 i586
=Sum: Assistive Technologies for Blind and Visually Impaired Users of the GNOME Desktop
+Des:
<!-- DT:Rich -->
<p>The gnopernicus project enables users with limited vision or no vision to use the GNOME 2 desktop and GNOME/GTK+-2 applications effectively. By providing automated focus tracking and fullscreen magnification, Gnopernicus aids low-vision GNOME users. Its screen reader features allow low-vision and blind users access to standard GTK+2 and Java-based GUI applications via speech and Braille output. By leveraging GNOME 2's built-in accessibility framework, Gnopernicus makes interacting with applications more efficient for these users and enables use of the GNOME 2 desktop for some users who otherwise would have no access to GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnucash 2.0.2 29 i586
=Sum: Personal Finance Manager
+Des:
<!-- DT:Rich -->
<p>GnuCash is a personal finance manager. A check book-like register GUI
allows you to enter and track bank accounts, stocks, income, and even
currency trades. A full set of reports allows you to see the state of
your finances. The interface is designed to be simple and easy to use,
but is backed with double-entry accounting principles to ensure
balanced books.
</p>
-Des:
##----------------------------------------
=Pkg: gnumeric 1.6.3 27 i586
=Sum: Spreadsheet Application
+Des:
<!-- DT:Rich -->
<p>Gnumeric is a spreadsheet application with advanced features and analytics. It aims to minimize the cost of transition from proprietary spreadsheets by offering a familiar look and feature set. In addition to read and write support for all versions of Microsoft Excel (including reading encrypted files), there is also support for many other formats including:
</p><p>
*Applix 4 and 5
*DIF
*Lotus-123 (wk1, wk2, wk3)
*OpenOffice.org (Oasis)
*PlanPerfect (pln)
*Psion5
*Quattro Pro (wb1, wb2, wb3)
*SYLK
*XBase/DB3
</p><p>
Text formats, such as comma or tab separated values, HTML, XHTML, and Latex, are supported and there are powerful assistants to handle custom needs.
</p><p>
Gnumeric is part of the GNOME project.
</p>
-Des:
##----------------------------------------
=Pkg: gnuplot 4.0.0 43 i586
=Sum: Function Plotting Utility
+Des:
<!-- DT:Rich -->
<p>GNUplot is a command line driven interactive function plotting
utility. GNUplot supports many different types of terminals,
plotters, and printers (including many color devices and
pseudodevices like LaTeX) and can easily be extended to include
new devices.
</p>
-Des:
##----------------------------------------
=Pkg: gnutls 1.4.4 17 i586
=Sum: The GNU Transport Layer Security Library
+Des:
<!-- DT:Rich -->
<p>The GnuTLS project aims to develop a library that provides a secure layer
over a reliable transport layer. Currently the GnuTLS library implements the
proposed standards of the IETF's TLS working group.
</p>
-Des:
##----------------------------------------
=Pkg: gnutls-devel 1.4.4 17 i586
=Sum: Development package for gnutls
+Des:
<!-- DT:Rich -->
<p>Files needed for software development using gnutls.
</p>
-Des:
##----------------------------------------
=Pkg: gob2 2.0.14 35 i586
=Sum: GOB2, The GObject Builder
+Des:
<!-- DT:Rich -->
<p>GOB is a simple preprocessor for making GObject objects (glib2 objects).
It makes objects from a single file with inline C code so that
you do not have to edit the generated files. Syntax is somewhat inspired
by Java and yacc. It supports generating C++ code.
</p>
-Des:
##----------------------------------------
=Pkg: goffice 0.2.1 24 i586
=Sum: GLib/GTK+ Set of Document-Centric Objects and Utilities
+Des:
<!-- DT:Rich -->
<p>These are common operations for document-centric applications that are
conceptually simple, but complex to implement fully.<ul>
<li>Plug-ins
</li><li>Load and save documents
</li><li>Undo and redo
</li></ul>
GOffice is a GLib/GTK+ set of document-centric objects and utilities.
</p>
-Des:
##----------------------------------------
=Pkg: gok 1.2.0 30 i586
=Sum: GNOME On-Screen Keyboard
+Des:
<!-- DT:Rich -->
<p>The GNOME On-screen Keyboard (GOK) is a dynamic on-screen keyboard for
UNIX and UNIX-like operating systems. It features direct selection,
dwell selection, automatic scanning, and inverse scanning access
methods and includes word completion.
</p>
-Des:
##----------------------------------------
=Pkg: goom2k4 rc2 83 i586
=Sum: Program and Library for visual effects
+Des:
<!-- DT:Rich -->
<p>Goom is a visual effects generator for mp3 players.
</p>
-Des:
##----------------------------------------
=Pkg: gpart 0.1h 515 i586
=Sum: Tool That Can Guess a Lost Partition Table
+Des:
<!-- DT:Rich -->
<p>Gpart is a small tool that tries to guess what partitions are on a PC type
hard disk in case the primary partition table was damaged.
Gpart supports, among others, partitions formatted as ext2, FAT 12/16/32,
ReiserFS, NTFS, and HPFS.
Read the file /usr/share/doc/packages/gpart/README and the gpart man page
before using gpart.
</p>
-Des:
##----------------------------------------
=Pkg: gpg 1.4.5 24 i586
=Sum: The GNU Privacy Guard: Encrypts, Decrypts, and Signs Data
+Des:
<!-- DT:Rich -->
<p>The GNU Privacy Guard is an OpenPGP (RFC2440) implementation.
It allows encryption, decryption, and signatures of data
and contains strong cryptographic algorithms.
It is most often used with mail.
It is not to be exported or reexported from the US. It is not to be used
in certain countries. Please check the laws.
As of version 1.0.3, support for RSA has been integrated into
GnuPG, as the patent encumbrance expired 2000-09-20.
If you want to read PGP2 encrypted mail, you still need to
install gpgaddon for idea support.
</p>
-Des:
##----------------------------------------
=Pkg: gpg2 1.9.22 20 i586
=Sum: GnuPG 2
+Des:
<!-- DT:Rich -->
<p>GnuPG 2 is the successor of "GnuPG" or GPG.
It provides: GPGSM, gpg-agent, and a keybox library.
</p>
-Des:
##----------------------------------------
=Pkg: gpgme 1.1.2 28 i586
=Sum: A Library Designed to Give Applications Easy Access to GnuPG
+Des:
<!-- DT:Rich -->
<p>GnuPG Made Easy (GPGME) is a library designed to make access to GnuPG easier for applications.
It provides a high-level Crypto API for encryption, decryption, signing, signature
verification, and key management. Currently it uses GnuPG as its back-end, but the API is not
restricted to this engine.
</p><p>
Because the direct use of GnuPG from an application can be a complicated programming task,
it is suggested that all software should try to use GPGME instead. This way bug fixes or
improvements can be done at a central place and every application benefits from this.
Authors of MUAs should especially consider using GPGME. Creating a set of standard
widgets for common key selection tasks is even planned.
</p>
-Des:
##----------------------------------------
=Pkg: gphoto 2.2.1.4.trunk 19 i586
=Sum: A Digital Camera Utility
+Des:
<!-- DT:Rich -->
<p>gPhoto (GNU Photo) is a command line tool for previewing, retrieving, and capturing images from a range of supported digital cameras to your local hard drive. It does not support digital cameras based on the USB storage protocol, because
those can be mounted by Linux directly.
</p><p>
Find the list of supported cameras at the following URL:
<p>The gpm (general purpose mouse) daemon tries to be a useful mouse server for applications running on the Linux console. It can be used by <a href="pkg://mc"> Midnight Commander</a> or
by <a href="pkg://w3m">w3m</a>, the text-based Web browser. It provides console cut and paste operations.
</p>
-Des:
##----------------------------------------
=Pkg: gpsdrive 2.09 63 i586
=Sum: Navigation via a GPS Receiver
+Des:
<!-- DT:Rich -->
<p>GpsDrive supports a GPS receiver connected to a serial port. It can navigate using maps from http://www.mapblast.com or http://www.expedia.com. Refer to the copyright of the maps.
</p>
-Des:
##----------------------------------------
=Pkg: gqcam 0.9 97 i586
=Sum: Nice Webcam Client for Most USB Webcams
+Des:
<!-- DT:Rich -->
<p>This is a small Webcam client, which captures images from the command line or can be run with a GUI.
Find a list of supported Webcams at http://cse.unl.edu/~cluening/gqcam.
</p>
-Des:
##----------------------------------------
=Pkg: gramofile 1.6 268 i586
=Sum: Digitize Audio Records
+Des:
<!-- DT:Rich -->
<p>Gramofile is a program to digitize audio records. Through the application
of several filters, it is possible to accomplish a significant reduction
of disturbances like ticks and scratches. Data is saved in WAV format,
making it easy to record on CD with programs like cdrecord or
xcdroast.
</p>
-Des:
##----------------------------------------
=Pkg: graphviz 2.6 44 i586
=Sum: Graph Visualization Tools
+Des:
<!-- DT:Rich -->
<p>A collection of tools and tcl packages for the manipulation and layout
of graphs (as in nodes and edges, not as in bar charts).
</p>
-Des:
##----------------------------------------
=Pkg: grass 5.0.3 54 i586
=Sum: Geographical Information System
+Des:
<!-- DT:Rich -->
<p>GRASS (Geographic Resources Analysis Support System)
is a raster-based GIS (Geographical Information System), vector GIS,
image processing system, graphics production
system, data management system, and spatial
modeling system. A graphical user interface
for the X Window System is provided.
</p>
-Des:
##----------------------------------------
=Pkg: grep 2.5.1a 40 i586
=Sum: Print lines matching a pattern
+Des:
<!-- DT:Rich -->
<p>GNU grep, the "fastest grep in the west" (hopefully).
</p><p>
`grep' searches for lines matching a pattern.
</p>
-Des:
##----------------------------------------
=Pkg: grepmail 5.3032 31 i586
=Sum: Search Mailboxes for a Particular E-Mail
+Des:
<!-- DT:Rich -->
<p>Grepmail searches a normal, gzipped, bzipped, or tzipped mailbox for a given
regular expression, and returns any e-mails that match that expression. Piped input is
allowed and date restrictions are supported.
</p>
-Des:
##----------------------------------------
=Pkg: grip 3.2.0 77 i586
=Sum: An Audio CD Ripping Application
+Des:
<!-- DT:Rich -->
<p>Grip automates the process of extracting audio CD data, encoding it with Ogg Vorbis, and naming the resulting files using CDDB data. It also allows creation of MP3 files if you have an MP3 encoder installed.
</p>
-Des:
##----------------------------------------
=Pkg: groff 1.18.1.1 49 i586
=Sum: GNU troff Document Formatting System
+Des:
<!-- DT:Rich -->
<p>The groff package provides compatible versions of troff, nroff, eqn,
tbl, and other Unix text formatting utilities.
</p><p>
Groff is used to "compile" man pages stored in groff or nroff format for
different output devices, for example, displaying to a screen or in
PostScript(tm) format for printing on a PostScript(tm) printer.
Most programs store their man pages in either /usr/share/man/ or
/usr/X11R6/man/.
</p>
-Des:
##----------------------------------------
=Pkg: grub 0.97 40 i586
=Sum: Grand Unified Boot Loader
+Del:
<!-- DT:Rich -->
<p>This package is required for booting your Linux system.
</p><p>
Remove this package only if you have another boot loader configured and you know what you are doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>GNU GRUB is a multiboot boot loader. It was derived from GRUB. It is an attempt to
produce a boot loader for IBM PC-compatible machines that has
both the ability to be friendly to beginning or otherwise nontechnically
interested users and the flexibility to help experts in diverse
environments.
It is compatible with Free/Net/OpenBSD and Linux. It supports Win 9x/NT and OS/2
via chainloaders. It has a menu interface and
a command line interface.
</p>
-Des:
##----------------------------------------
=Pkg: gscpm 0.1 59 i586
=Sum: GNOME Support for SCPM
+Des:
<!-- DT:Rich -->
<p>This package adds GNOME support for the profile manager SCPM. It contains a GNOME panel applet for choosing a destination profile. By default it uses SUMF to perform the profile switch, but can be configured to execute an arbitrary command.
</p>
-Des:
##----------------------------------------
=Pkg: gsf-sharp 0.7 51 i586
=Sum: Mono Bindings for libgsf
+Des:
<!-- DT:Rich -->
<p>Mono bindings for libgsf.
</p>
-Des:
##----------------------------------------
=Pkg: gsl 1.8 23 i586
=Sum: GNU Scientific Library
+Des:
<!-- DT:Rich -->
<p>The GNU Scientific Library (GSL) is a collection of routines for numerical
computing. The routines are written from scratch by the GSL team in ANSI C and
present a modern Applications Programming Interface (API) for C programmers,
while allowing wrappers to be written for very high level languages.
</p><p>
The library covers the following areas:
</p><p>
Complex Numbers Roots of Polynomials Special Functions
Vectors and Matrices Permutations Sorting
BLAS Support Linear Algebra Eigensystems
Fast Fourier Transforms Quadrature Random Numbers
Quasi-Random Sequences Random Distributions Statistics
<p>GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gthumb 2.7.9 27 i586
=Sum: An Image Viewer and Browser for GNOME
+Des:
<!-- DT:Rich -->
<p>gThumb lets you browse your hard disk, showing you thumbnails of image files.
It also lets you view single files (including GIF animations), add comments to
images, organize images in catalogs, print images, view slide shows, set your
desktop background, and more.
</p>
-Des:
##----------------------------------------
=Pkg: gtk 1.2.10 926 i586
=Sum: A Library for the Creation of Graphical User Interfaces
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library is used all over the world for all
GNOME applications, the GIMP, and several others. Originally it was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-engines 0.12 1005 i586
=Sum: Theme Engines for GTK+
+Des:
<!-- DT:Rich -->
<p>This package contains the graphical engines for the various GTK+ toolkit themes.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-qt-engine 0.7cvs20061120 4 i586
=Sum: GTK-Style Engine for Use with Qt Plug-Ins and Settings
+Des:
<!-- DT:Rich -->
<p>This engine is for use by GTK applications running in KDE. It applies all Qt
settings to the GTK application and uses Qt style plug-ins directly.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp 1.0.10 60 i586
=Sum: Mono bindings for gtk+
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for gtk+, gdk, atk, and pango.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp-gapi 1.0.10 60 i586
=Sum: C Source Parser and C Generator
+Des:
<!-- DT:Rich -->
<p>The gtk-sharp-gapi package includes the parser and code generator used by the GTK if you want to bind GObject-based libraries, or need to compile a project that uses it to bind such a library.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2 2.8.3 33 i586
=Sum: .Net Language Bindings for GTK+
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for gtk+, gdk, atk, and pango.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2-complete 2.8.3 33 i586
=Sum: GTK+ and GNOME bindings for Mono (virtual package)
+Des:
<!-- DT:Rich -->
<p>Gtk# is a library that allows you to build fully native graphical GNOME applications using Mono. Gtk# is a binding to GTK+, the cross platform user interface toolkit used in GNOME. It includes bindings for Gtk, Atk, Pango, Gdk, libgnome, libgnomeui and libgnomecanvas. (Virtual package which depends on all gtk-sharp2 subpackages)
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2-doc 2.8.3 33 i586
=Sum: Monodoc documentation for gtk-sharp2
+Des:
<!-- DT:Rich -->
<p>This package contains the gtk-sharp2 documentation for monodoc.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2-gapi 2.8.3 33 i586
=Sum: C Source Parser and C Generator
+Des:
<!-- DT:Rich -->
<p>The gtk-sharp-gapi package includes the parser and code generator used by the GTK if you want to bind GObject-based libraries, or need to compile a project that uses it to bind such a library.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2 2.10.6 13 i586
=Sum: Library for Creation of Graphical User Interfaces
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library is used all over the world for all
GNOME applications, the GIMP, and several others. Originally it was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-devel 2.10.6 13 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library is used all over the world for all
GNOME applications, the GIMP, and several other applications. Originally it was
written for the GIMP and hence has the name Gimp ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-doc 2.10.6 13 i586
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library is used all over the world for all
GNOME applications, the GIMP, and several other applications. Originally it was
written for the GIMP and hence has the name Gimp ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-engines 2.8.1 16 i586
=Sum: Engines for GTK2 Themes
+Des:
<!-- DT:Rich -->
<p>This packages contains the theme engine libraries for GTK2.
</p>
-Des:
##----------------------------------------
=Pkg: gtkam 0.1.13.head 21 i586
=Sum: A GTK Digital Camera Tool
+Des:
<!-- DT:Rich -->
<p>GTKam is a GTK and GNOME based tool for accessing a digital camera,
viewing thumbnails, and downloading pictures from the camera.
</p>
-Des:
##----------------------------------------
=Pkg: gtkglarea 1.2.2 930 i586
=Sum: An OpenGL Widget for GTK+
+Des:
<!-- DT:Rich -->
<p>This package contains a widget for the GTK+ toolkit, which allows
you to program OpenGL under GTK+. It is needed by XTraceroute.
</p>
-Des:
##----------------------------------------
=Pkg: gtkhtml-sharp 1.0.10 60 i586
=Sum: Mono bindings for gtkhtml
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for gtkhtml.
</p>
-Des:
##----------------------------------------
=Pkg: gtkhtml-sharp2 2.8.3 33 i586
=Sum: Mono bindings for gtkhtml
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for gtkhtml.
</p>
-Des:
##----------------------------------------
=Pkg: gtkhtml2 3.12.2 4 i586
=Sum: Library for HTML Support for Gtk2
+Des:
<!-- DT:Rich -->
<p>GtkHTML is a lightweight HTML rendering, printing, and editing engine.
It was originally based on KHTMLW, but is now being independently developed.
</p>
-Des:
##----------------------------------------
=Pkg: gtkhtml2-devel 3.12.2 4 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gtkiterm 0.5.20040304 66 i586
=Sum: Internationalized Terminal Emulator for GTK
+Des:
<!-- DT:Rich -->
<p>An internationalized terminal emulator for GTK.
</p>
-Des:
##----------------------------------------
=Pkg: gtklp 1.2.2 29 i586
=Sum: A Gtk Front-End for CUPS
+Des:
<!-- DT:Rich -->
<p>The X Printing Panel (XPP) CUPS-compatible tool for selecting a
printer from a list of all available printers and for setting
printer options using a GUI. Features:<ul>
<li>Gtk interface with theme support
</li><li>IPP support
</li><li>Printer-specific options
</li><li>All standard cups options
</li><li>Different preference files for each printer
</li><li>Gettext support for different languages
</li><li>X Window System and console support
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: gtkmm2 2.10.2 11 i586
=Sum: C++ Interface for GTK2 (a GUI Library for X)
+Des:
<!-- DT:Rich -->
<p>Gtkmm provides a C++ interface to the GTK+ GUI library. gtkmm2 wraps GTK+ 2.
Highlights include typesafe callbacks, widgets extensible via inheritance,
and a comprehensive set of widget classes that can be freely combined to
quickly create complex user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: gtkmm2-devel 2.10.2 11 i586
=Sum: C++ Interface for GTK2 (a GUI library for X)
+Des:
<!-- DT:Rich -->
<p>Gtkmm provides a C++ interface to the GTK+ GUI library. gtkmm2 wraps GTK+ 2.
Highlights include typesafe callbacks, widgets extensible via inheritance
and a comprehensive set of widget classes that can be freely combined to
quickly create complex user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview 1.8.1 21 i586
=Sum: GTK+ 2.0 Source Editing Widget
+Des:
<!-- DT:Rich -->
<p>GtkSourceView is a text widget that extends the standard GTK+ 2.x
text widget, GtkTextView.
</p><p>
GtkSourceView improves GtkTextView by implementing syntax highlighting and other
features typical of a source editor.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview-devel 1.8.1 21 i586
=Sum: GTK+ 2.0 Source Editing Widget
+Des:
<!-- DT:Rich -->
<p>GtkSourceView is a text widget that extends GtkTextView, the standard GTK+ 2.x
text widget.
</p><p>
It improves GtkTextView by implementing syntax highlighting and other
features typical of a source editor.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview-doc 1.8.1 21 i586
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>This package contains optional documentation provided in addition to this package's base documentation.
</p>
-Des:
##----------------------------------------
=Pkg: gtkspell 2.0.11 39 i586
=Sum: GTK2 Spell Checker Interface Library
+Des:
<!-- DT:Rich -->
<p>GtkSpell provides MSWord-style and MacOSX-style highlighting of misspelled words
in a GtkTextView widget. Right-clicking a misspelled word opens a
menu of suggested replacements.
</p>
-Des:
##----------------------------------------
=Pkg: gucharmap 1.8.0 28 i586
=Sum: A Feature-Rich Unicode Character Map
+Des:
<!-- DT:Rich -->
<p>Gucharmap is a feature-rich Unicode character map and font viewer.
</p>
-Des:
##----------------------------------------
=Pkg: gucharmap-devel 1.8.0 28 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: guile 1.8.1 24 i586
=Sum: GNU's Ubiquitous Intelligent Language for Extension
+Des:
<!-- DT:Rich -->
<p>This is Guile, a portable, embeddable Scheme implementation written in C.
Guile provides a machine independent execution platform that can be
linked in as a library when building extensible programs.
</p>
-Des:
##----------------------------------------
=Pkg: guile-devel 1.8.1 24 i586
=Sum: GNU's Ubiquitous Intelligent Language for Extension
+Des:
<!-- DT:Rich -->
<p>This is Guile, a portable, embeddable Scheme implementation written in C.
Guile provides a machine independent execution platform that can be
linked in as a library when building extensible programs.
</p>
-Des:
##----------------------------------------
=Pkg: gup 0.3 885 i586
=Sum: Group Update Program for INN and C-News
+Des:
<!-- DT:Rich -->
<p>A Group Update Program that accepts commands by mail
to edit a newsgroup subscription file. It can be used
by news systems such as INN and C-News.
</p>
-Des:
##----------------------------------------
=Pkg: gutenprint 5.0.0 1 i586
=Sum: Gutenprint drivers for CUPS
+Des:
<!-- DT:Rich -->
<p>This package contains the gutenprint drivers (formerly known as gimp-print drivers) for CUPS.
</p>
-Des:
##----------------------------------------
=Pkg: gv 3.5.8 1184 i586
=Sum: A Program to View PostScript Files
+Des:
<!-- DT:Rich -->
<p>GV offers you an X Window System GUI for viewing PostScript files.
This is an X Window System interface to ghostscript.
</p>
-Des:
##----------------------------------------
=Pkg: gvim 7.0 34 i586
=Sum: A GUI for Vi
+Des:
<!-- DT:Rich -->
<p>Start: /usr/X11R6/bin/gvim
</p><p>
Copy and modify /usr/share/vim/current/gvimrc to ~/.gvimrc if needed.
</p><p>
Package gvim contains the largest set of features of vim, which is graphical windows and language interpreter, like python, ruby, or perl. You need package vim for the help and other documentation too. If you want less features, you might want to install packages vim-enhanced or vim instead.
</p>
-Des:
##----------------------------------------
=Pkg: gwenhywfar 2.4.1 15 i586
=Sum: A Multiplatform Helper Library for Other Libraries
+Des:
<!-- DT:Rich -->
<p>Gwenhywfar is a base library used to provide OS abstraction functions for Linux,
FreeBSD, OpenBSD, NetBSD, and Windows. It also includes some often needed
functions (for example, for handling and parsing of configuration files, reading and writing
of XML files, and interprocess communication). It is used by OpenHBCI2,
Libchipcard2, Simthetic, AqBanking, and QBankManager.
</p>
-Des:
##----------------------------------------
=Pkg: gwenhywfar-devel 2.4.1 15 i586
=Sum: A Multi-Platform Helper Library for Other Libraries
+Des:
<!-- DT:Rich -->
<p>Gwenhywfar is a base library used to provide OS abstraction functions for Linux,
FreeBSD, OpenBSD, NetBSD, and Windows. It also includes some often needed
functions (e.g. for handling and parsing of configuration files, reading/writing
of XML files, interprocess communication etc). It is used by: OpenHBCI2,
Libchipcard2, Simthetic, AqBanking, QBankManager.
</p>
-Des:
##----------------------------------------
=Pkg: gwenview 1.4.0 29 i586
=Sum: Simple Image Viewer for KDE
+Des:
<!-- DT:Rich -->
<p>Gwenview is a simple image viewer for KDE. It features a folder tree window
and a file list window, providing easy navigation of your file hierarchy.
</p>
-Des:
##----------------------------------------
=Pkg: gwget 0.98.1 39 i586
=Sum: Front-End for wget Written in GTK+
+Des:
<!-- DT:Rich -->
<p>Front-end for wget written in GTK+.
</p>
-Des:
##----------------------------------------
=Pkg: gxmhtml 1.4.1.7 733 i586
=Sum: Gtk-XMHTML
+Des:
<!-- DT:Rich -->
<p>Gtk-XMHTML is a GTK component for visualizing HTML.
</p>
-Des:
##----------------------------------------
=Pkg: gzip 1.3.5 178 i586
=Sum: GNU Zip Compression Utilities
+Des:
<!-- DT:Rich -->
<p>Gzip reduces the size of the named files using Lempel-Ziv coding
LZ77. Whenever possible, each file is replaced by one with the
extension .gz, while keeping the same ownership modes and access and
modification times.
</p>
-Des:
##----------------------------------------
=Pkg: hal 0.5.8_git20061106 20 i586
=Sum: Daemon for Collecting Hardware Information
+Des:
<!-- DT:Rich -->
<p>HAL is a hardware abstraction layer and aims to provide a live list of
devices present in the system at any point in time. HAL tries to understand
both physical devices (such as PCI and USB) and the device classes (such as
input, net, and block) physical devices have and it allows merging of
information from device info files specific to a device.
</p><p>
HAL provides a network API through D-BUS for querying devices and notifying
when things change. Finally, HAL provides some monitoring (in an unintrusive
way) of devices. Presently, ethernet link detection and volume mounts are
monitored.
</p><p>
This, and more, is all described in the HAL specification.
</p>
-Des:
##----------------------------------------
=Pkg: hal-devel 0.5.8_git20061106 20 i586
=Sum: Developer package for HAL
+Des:
<!-- DT:Rich -->
<p>HAL is a hardware abstraction layer and aims to provide a live list of devices present in the system at any point in time. HAL tries to understand both physical devices (such as PCI, USB) and the device classes (such as input, net and block) physical devices have, and it allows merging of information from so called device info files specific to a device.
</p><p>
HAL provides a network API through D-BUS for querying devices and notifying when things change. Finally, HAL provides some monitoring (in an unintrusive way) of devices, presently ethernet link detection and volume mounts are monitored.
</p><p>
This, and more, is all described in the HAL specification
</p>
-Des:
##----------------------------------------
=Pkg: hal-gnome 0.5.8_git20061106 20 i586
=Sum: GNOME based device manager for HAL
+Des:
<!-- DT:Rich -->
<p>GNOME program for displaying the devices detected by HAL
</p>
-Des:
##----------------------------------------
=Pkg: hal-resmgr 0.1_SVNr124 5 i586
=Sum: Install ACLs on device nodes
+Des:
<!-- DT:Rich -->
<p>hal-resmgr hooks into hald and resmgr in order to install file system ACLs on device nodes when users log in and out.
</p>
-Des:
##----------------------------------------
=Pkg: hanout 0.1 774 i586
=Sum: Quick Hack for X Hangul Display
+Des:
<!-- DT:Rich -->
<p>Hanout is just a quick (but powerful) hack for Hangul display in X.
=Sum: A Program to Get and Set Hard Disk Parameters
+Des:
<!-- DT:Rich -->
<p>A shell utility to access and tune the ioctl features of
the Linux IDE driver and IDE drives.
</p>
-Des:
##----------------------------------------
=Pkg: heap-buddy 0.1 41 i586
=Sum: Heap-buddy is a heap profiler for mono
+Des:
<!-- DT:Rich -->
<p>Heap-buddy is a heap profiler for mono. It attaches to special hooks in the
mono runtime and tracks all of the managed memory allocations, every garbage
collection and every heap resize. These statistics are written out into a
data file that we call an 'outfile'.
</p>
-Des:
##----------------------------------------
=Pkg: helix-banshee 0.11.2 17 i586
=Sum: A Music Player
+Des:
<!-- DT:Rich -->
<p>Helix Banshee is a music management and playback application. It supports both CD importing and writing, and is compatible with many digital audio players.
</p>
-Des:
##----------------------------------------
=Pkg: helix-banshee-devel 0.11.2 17 i586
=Sum: A Music Player
+Des:
<!-- DT:Rich -->
<p>Helix Banshee is a music management and playback application. It supports both CD importing and writing, and is compatible with many digital audio players.
</p>
-Des:
##----------------------------------------
=Pkg: helix-banshee-engine-gst 0.11.2 17 i586
=Sum: GStreamer playback engine for Helix Banshee
+Des:
<!-- DT:Rich -->
<p>Helix Banshee is a music management and playback application. It supports both CD importing and writing, and is compatible with many digital audio players.
</p>
-Des:
##----------------------------------------
=Pkg: helix-banshee-engine-helix 0.11.2 17 i586
=Sum: Helix playback engine for Helix Banshee
+Des:
<!-- DT:Rich -->
<p>Helix Banshee is a music management and playback application. It supports both CD importing and writing, and is compatible with many digital audio players.
</p>
-Des:
##----------------------------------------
=Pkg: helix-banshee-plugins-DAAP 0.11.2 17 i586
=Sum: Helix Banshee Plugin for DAAP
+Des:
<!-- DT:Rich -->
<p>Digital Audio Access Protocol plugin for Helix Banshee
<p>A default set of plugins for Helix Banshee including AudioScrobbler support, notification area icon, multimedia keys support, and more.
</p>
-Des:
##----------------------------------------
=Pkg: helix-banshee-plugins-extra 0.11.2 17 i586
=Sum: Extra Helix Banshee plugins
+Des:
<!-- DT:Rich -->
<p>Plugins for Podcasting, MiniMode, and automatic music recommendations
</p>
-Des:
##----------------------------------------
=Pkg: helix-dbus-server 0.3.0 26 i586
=Sum: DBus server for hxclientkit
+Des:
<!-- DT:Rich -->
<p>helix-dbus-player is made up of two main components:
</p><p>
hxplayer and hxmessage: a simple C/GLib wrapper on top of the Helix
hxclientkit API that consolidates hxclientkit events into a single
message API and offers full playback functionality. It also handles
threading and engine pumping
</p><p>
helix-dbus-server exposes hxplayer and hxmessage over DBus, allowing
full control of the Helix player and the propagation of hxmessages over
the Message signal
</p>
-Des:
##----------------------------------------
=Pkg: hermes 1.3.2 477 i586
=Sum: A Graphics Conversion Library
+Des:
<!-- DT:Rich -->
<p>A graphics library for converting between various pixel formats.
</p>
-Des:
##----------------------------------------
=Pkg: hfsplusutils 1.0.4 36 i586
=Sum: Userspace HFS+ Utilities
+Des:
<!-- DT:Rich -->
<p>A portable, free implementation of routines for accessing HFS+ volumes.
Currently only reading is supported.
</p>
-Des:
##----------------------------------------
=Pkg: hfsutils 3.2.6 1071 i586
=Sum: Tools Used for the Macintosh's Hierarchical File System
+Ins:
<!-- DT:Rich -->
<p>You can also install xhfsutil--a Tcl/Tk front-end for hfsutils.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>HFS is the Hierarchical File System used on modern Macintosh computers.
With this package, you can read and write Macintosh-formatted media, such as
floppy disks, CD-ROMs, and SCSI hard disks on most UNIX platforms. You can
also format raw media into an HFS volume.
</p>
-Des:
##----------------------------------------
=Pkg: hk_classes 0.8.2 23 i586
=Sum: Database Interface Library and Classes
+Des:
<!-- DT:Rich -->
<p>The hk_classes are a set of nonvisual routines that allow you to develop
database front-end applications as easily as possible. You also need a database driver to run applications. This package contains a driver for MySQL, PostrgeSQL, and ODBC, which will be automatically installed if configure finds a working database installation on your computer.
</p><p>
Optionally, you can use graphical front-end libraries (for example: hk_kdeclasses from the knoda package) to write intermediate X Window System database applications in just a few lines.
</p>
-Des:
##----------------------------------------
=Pkg: hmconv 1.0pl5 548 i586
=Sum: HangulCode Conversion Program
+Des:
<!-- DT:Rich -->
<p>HangulCode conversion program.
</p>
-Des:
##----------------------------------------
=Pkg: hostap 0.4.9 29 i586
=Sum: Turns Your WLAN Card into an Access Point
+Des:
<!-- DT:Rich -->
<p>This is a Linux driver for wireless LAN cards based on Intersil's Prism2/2.5 chipset. The driver supports a Host AP mode--it takes care of IEEE 802.11 management functions in the host computer and acts as an access point. This does not require any special firmware for the wireless LAN card. In addition to this, it has some support for normal station operations in BSS and possible also in IBSS.
</p>
-Des:
##----------------------------------------
=Pkg: hotkey-setup 0.1 21 i586
=Sum: hotkey-setup sets up kernel keyboard mapping of laptop extra keys
+Des:
<!-- DT:Rich -->
<p>hotkey-setup is a trivial init script that uses DMI information to attempt
to detect the type of laptop in use. It then uses this information to bind
keyboard scancodes to keycodes. The keycodes used are (in general) the same
as those used on Microsoft keyboards.
</p><p>
Note: This package does not (on its own) cause the hotkeys to do anything.
It merely makes them available to userspace programs.
</p>
-Des:
##----------------------------------------
=Pkg: hp-officeJet 0.91 171 i586
=Sum: A Driver for HP OfficeJet All-in-One Devices
+Ins:
<!-- DT:Rich -->
<p>Run /usr/sbin/ptal-init setup as the root user to adjust important system settings before the first run.
After that, start the driver using the command /usr/sbin/ptal-init start.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>This driver allows printing and scanning with most of HP's OfficeJet
devices. Refer to the documentation in /usr/share/doc/packages/hp-officeJet for how to finish the installation of
the driver.
</p>
-Des:
##----------------------------------------
=Pkg: hplip 1.6.10 23 i586
=Sum: HP's Printing and Scanning Software
+Des:
<!-- DT:Rich -->
<p>The Hewlett-Packard Linux Imaging and Printing project (HPLIP) provides a unified single and multifunction connectivity solution for HP printers
and scanners (in particular, HP all-in-one devices).
</p><p>
HPLIP provides unified connectivity for printing, scanning, sending faxes, photo card access, and device management and is designed to work with CUPS.
It includes the Ghostscript printer driver HPIJS for HP printers and a special "hp" CUPS back-end that provides bidirectional communication with the device (required for HP printer device management).
It also includes the SANE scanner back-end "hpaio" for HP all-in-one devices
and another special "hpfax" CUPS back-end that is required to send faxes.
The "hp-toolbox" program is provided for device management.
The "hp-sendfax" program must be used to send faxes.
The "hp-setup" program can be used to set up HP all-in-one devices.
</p><p>
The HPLIP project is open source software and uses GPL-compatible licenses. For more information, see:
=Sum: HPIJS for HP's printing and scanning software HPLIP.
+Des:
<!-- DT:Rich -->
<p>HPIJS is a Ghostscript printer driver for HP printers.
</p><p>
This sub-package includes only the hpijs binary and the libhpip library which is needed to run it.
Normally (in particular for CUPS) the HPIJS driver needs the rest of HP's printing and scanning software in the package hplip.
For special cases (e.g. for LPRng/lpdfilter or for a minimal printing system) it is possible to use only the hpijs binary and Ghostscript.
</p><p>
For documentation and license see the main-package hplip.
</p>
-Des:
##----------------------------------------
=Pkg: htdig 3.2.0b6 42 i586
=Sum: WWW Index and Search System
+Des:
<!-- DT:Rich -->
<p>The ht://Dig system is a complete World Wide Web index and search
system for a small domain or intranet. This system is not meant to replace
the need for powerful Internet-wide search systems like Lycos, Infoseek,
Webcrawler, or AltaVista. Instead it is meant to cover the search needs
of a single company, campus, or even a particular subsection of a Web
site.
</p><p>
</p><p>
Unlike some WAIS-based or Web server-based search engines, ht://Dig
can span several Web servers at a site. The type of these
Web servers does not matter as long as they understand the HTTP 1.0 protocol.
</p>
-Des:
##----------------------------------------
=Pkg: html2text 1.3.2a 34 i586
=Sum: HTML to ASCII Converter
+Des:
<!-- DT:Rich -->
<p>A tool for converting from HTML to ASCII. It can reasonably handle tables.
</p>
-Des:
##----------------------------------------
=Pkg: hwinfo 13.18 3 i586
=Sum: Hardware Library
+Des:
<!-- DT:Rich -->
<p>A simple program that lists results from the hardware detection library.
</p>
-Des:
##----------------------------------------
=Pkg: hwinfo-devel 13.18 3 i586
=Sum: Hardware Detection Library
+Des:
<!-- DT:Rich -->
<p>This library collects information about the hardware installed on a system.
</p>
-Des:
##----------------------------------------
=Pkg: hydrogen 0.9.3 30 i586
=Sum: A Real-Time Drum Machine and Sequencer
+Des:
<!-- DT:Rich -->
<p>Hydrogen is a simple real-time Drum machine and sequencer for computer aided composition (CAC).
It supports OSS and JACK outputs and ALSA sequencer MIDI input.
</p>
-Des:
##----------------------------------------
=Pkg: i4l-base 2006.11.14 6 i586
=Sum: ISDN for Linux Basic Utilities
+Des:
<!-- DT:Rich -->
<p>These utilities are needed for configuring and using ISDN devices.
This package includes special tools for network connections via ISDN.
Other tools for setup of various ISDN cards and for monitoring ISDN connections are also included.
</p>
-Des:
##----------------------------------------
=Pkg: i4l-isdnlog 2006.11.14 6 i586
=Sum: An ISDN line logging and control utility
+Des:
<!-- DT:Rich -->
<p>Isdnlog is a very powerful tool to log calls on your ISDN line.
It can analyze the D-channel messages and start programs
based on various phone call events.
It can make summaries of phone call costs and translate known numbers to names.
It has its own database for areacodes and phone call costs for many phone network providers and can help you to take care of your phone bill.
</p>
-Des:
##----------------------------------------
=Pkg: i4l-vbox 2006.11.14 6 i586
=Sum: A Voice Answering Machine for isdn4linux
+Des:
<!-- DT:Rich -->
<p>i4l-vbox is a voice answering machine for isdn4linux.
It is a collection of tools for answering phone calls, recording messages via an ISDN card, and replaying recorded messages.
It is also possible to send the recorded messages to an email account.
The recording and playing of messages on the phone line is controlled via a
Tcl script, and it is possible to control additional functions via touch-tone.
The calling number can be used to select between various messages.
The answering machine configuration is controlled by a number of
variable configuration files.
</p>
-Des:
##----------------------------------------
=Pkg: i4lfirm 2006.11.14 6 i586
=Sum: ISDN firmware for active ISDN cards
+Des:
<!-- DT:Rich -->
<p>ISDN firmware for active ISDN cards.
</p>
-Des:
##----------------------------------------
=Pkg: ial 0.0.1 66 i586
=Sum: Input Abstraction Layer
+Des:
<!-- DT:Rich -->
<p>Input Abstraction Layer (IAL) makes special keys (such as multimedia keys and function keys found on laptops) "just work". IAL provides a daemon that can be enhanced by modules. These modules are sending events via D-Bus to the clients.
</p>
-Des:
##----------------------------------------
=Pkg: ibm-data-db2 1.1.18.1 12 i586
=Sum: Database connectivity for DB2
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Database connectivity for DB2.
</p>
-Des:
##----------------------------------------
=Pkg: icecream 0.7.14 17 i586
=Sum: For Distributed Compile in the Network
+Des:
<!-- DT:Rich -->
<p>icecream is the next generation distcc.
</p>
-Des:
##----------------------------------------
=Pkg: icecream-monitor 1.0 34 i586
=Sum: Monitor Program for the icecream Compile Farm
+Des:
<!-- DT:Rich -->
<p>icecream is the next generation distcc.
This package provides a monitor program.
</p>
-Des:
##----------------------------------------
=Pkg: icewm 1.2.26 32 i586
=Sum: Window Manager with a Taskbar
+Des:
<!-- DT:Rich -->
<p>A window manager for the X Window System that can emulate the look of Windows '95,
OS/2 Warp 3, OS/2 Warp 4, and Motif and tries to take the best features from those systems.
IceWM features multiple workspaces, opaque move and resize, a taskbar, a window list,
mailbox status, and a digital clock. It is fast and small.
</p>
-Des:
##----------------------------------------
=Pkg: icewm-default 1.2.26 25 i586
=Sum: Window Manager with a Taskbar--Default Version
+Des:
<!-- DT:Rich -->
<p>A window manager for the X Window System that can emulate the look of Windows '95,
OS/2 Warp 3, OS/2 Warp 4, and Motif and tries to take the best features from those systems.
IceWM features multiple workspaces, opaque move and resize, a taskbar, a window list,
mailbox status, and a digital clock. It is fast and small.
</p>
-Des:
##----------------------------------------
=Pkg: icewm-gnome 1.2.26 32 i586
=Sum: Windowmanager with Taskbar - gnome version
+Des:
<!-- DT:Rich -->
<p>Window Manager for X Window System. Can emulate the look of Windows 95,
OS/2 Warp 3,4, Motif. Tries to take the best features of the above systems.
Features multiple workspaces, opaque move and resize, task bar, window list,
mailbox status, digital clock. Fast and small.
</p><p>
This package contains icewm compiled with GNOME support.
</p>
-Des:
##----------------------------------------
=Pkg: icu 3.4 34 i586
=Sum: International Components for Unicode
+Des:
<!-- DT:Rich -->
<p>ICU is a set of C and C++ libraries that provides robust and
full-featured Unicode and locale support. The library provides
calendar support, conversions for many character sets, language
sensitive collation, date and time formatting, support for many
locales, message catalogs and resources, message formatting,
normalization, number and currency formatting, time zone support,
transliteration, and word, line, and sentence breaking, etc.
</p><p>
This package contains the Unicode character database and derived
properties along with converters and time zone data.
</p><p>
This package contains the runtime libraries for ICU. It does not
contain any of the data files needed at runtime and present in the
icu and icu-locales packages.
</p>
-Des:
##----------------------------------------
=Pkg: icu-data 3.4 34 i586
=Sum: International Components for Unicode (Sources for the Data in ICU)
+Des:
<!-- DT:Rich -->
<p>ICU is a C++ and C library that provides robust and full-featured Unicode
support. This package contains the source files for the data found in
the "icu" package.
</p><p>
This data describes the Unicode data (normative and informative) and
also all the table-based converters provided in the ICU distribution.
</p><p>
This package contains uncompiled source data. Precompiled data is in the
`libicu%{version}' package.
</p>
-Des:
##----------------------------------------
=Pkg: id3lib 3.8.3 124 i586
=Sum: A Library for Manipulating ID3v1 and ID3v2 tags
+Des:
<!-- DT:Rich -->
<p>This package provides a software library for manipulating ID3v1 and ID3v2
tags.
It provides a convenient interface for software developers to include
standards-compliant ID3v1/2 tagging capabilities in their applications.
Features include identification of valid tags, automatic size conversions,
synchronization and resynchronization of tag frames, seamless tag compression
and decompression, and optional padding facilities.
<p>Mkid is a simple, fast, high-capacity, and language-independent
identifier database tool. Actually, the term identifier is too
limiting--mkid stores tokens, be they program identifiers of any
form, literal numbers, or ordinary words. Database
queries can be issued from the command line or from within Emacs,
serving as an augmented tags facility.
</p>
-Des:
##----------------------------------------
=Pkg: ifolder3 3.4.6228.1 37 i586
=Sum: File Sharing and Collaboration Tool
+Des:
<!-- DT:Rich -->
<p>The iFolder Project is a project focused on file sharing and collaboration, released under the GPL and supporting the iFolder 3 protocol from Novell.
</p>
-Des:
##----------------------------------------
=Pkg: ifplugd 0.28 41 i586
=Sum: Daemon Activating Network Interfaces on Cable Plug
+Des:
<!-- DT:Rich -->
<p>ifplugd is a lightweight Linux daemon that configures the network automatically when a cable is plugged in and unconfigures it when
the cable is pulled. It is primarily intended for use with laptops.
It relies on the distribution's native network configuration subsystem,
so is not very intrusive.
</p>
-Des:
##----------------------------------------
=Pkg: iftop 0.17 20 i586
=Sum: Real-Time Interface Bandwidth Usage
+Des:
<!-- DT:Rich -->
<p>iftop does for network usage what top(1) does for CPU usage. It listens
to network traffic on a named interface and displays a table of current
bandwidth usage by pairs of hosts. It is handy for explaining why the network link so slow.
</p>
-Des:
##----------------------------------------
=Pkg: imap 2004g_suse 36 i586
=Sum: IMAP4, POP2, and POP3 Mail Server
+Des:
<!-- DT:Rich -->
<p>This package contains IMAP4, POP2, and POP3 mail servers.
</p><p>
After installation, activate the servers in
the file /etc/inetd.conf.
</p>
-Des:
##----------------------------------------
=Pkg: imap-lib 2004g_suse 36 i586
=Sum: IMAP4rev1/c-client Development Environment
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries for IMAP client programs.
</p>
-Des:
##----------------------------------------
=Pkg: img2eps 0.2 32 i586
=Sum: Bitmap Image to Encapsulated PostScript Converter
+Des:
<!-- DT:Rich -->
<p>Converts bitmap images in the formats PNG, JPEG, and TIFF to
Encapsulated PostScript Level 1, 2, or 3. Supports the native
PostScript filters ASCIIHex, ASCII85, DCT, LZW, Flate, and RunLength.
</p>
-Des:
##----------------------------------------
=Pkg: imgSeek 0.8.5 50 i586
=Sum: Photo Collection Manager and Viewer with Content-Based Query
+Des:
<!-- DT:Rich -->
<p>imgSeek is a photo collection manager and viewer with content-based search and many other features. The query is expressed either as a rough sketch painted by the user or as another image you supply (or an image in your collection).
</p>
-Des:
##----------------------------------------
=Pkg: imhangul 0.9.11 37 i586
=Sum: GTK+-2.0 Hangul Input Modules
+Des:
<!-- DT:Rich -->
<p>GTK+-2.0 Hangul input modules.
</p>
-Des:
##----------------------------------------
=Pkg: imlib 1.9.14 237 i586
=Sum: A Shared Library for Loading and Rendering 3D Images
+Des:
<!-- DT:Rich -->
<p>This is a general, all-purpose image loading and rendering (image data
to screen data) library. Imlib is currently capable of loading 25
different image formats.
</p><p>
See the file /usr/include/X11/imlib.h or directory
/usr/share/doc/packages/imlib for more details.
</p><p>
This shared library is needed for the Enlightenment window manager and
for GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: imlib-devel 1.9.14 237 i586
=Sum: Imlib Development Environment
+Des:
<!-- DT:Rich -->
<p>This package is required for developing programs linked against
Imlib or for compiling GNOME packages.
</p>
-Des:
##----------------------------------------
=Pkg: imlib2 1.2.1 43 i586
=Sum: Imlib 2, the Successor to Imlib
+Des:
<!-- DT:Rich -->
<p>Imlib 2 is the successor to Imlib. It is not just a newer version--it is a
completely new library. Imlib2 can be installed alongside Imlib 1.x without any
problems because they are effectively different libraries. However, they have very
similar functionality.
</p>
-Des:
##----------------------------------------
=Pkg: imlib2-devel 1.2.1 43 i586
=Sum: Imlib 2 - development libraries
+Des:
<!-- DT:Rich -->
<p>Imlib 2 is the successor to Imlib. It is not just a newer version - it is a
completely new library. Imlib2 can be installed alongside Imlib 1.x without any
problems since they are effectively different libraries - but they Have very
similar functionality.
</p><p>
This package contains the development libraries.
</p>
-Des:
##----------------------------------------
=Pkg: imlib2-loaders 1.2.1 43 i586
=Sum: Imlib 2 - image loaders
+Des:
<!-- DT:Rich -->
<p>Imlib 2 is the successor to Imlib. It is not just a newer version - it is a
completely new library. Imlib2 can be installed alongside Imlib 1.x without any
problems since they are effectively different libraries - but they Have very
<p>indent can be used to make code easier to read. It can
also convert from one style of writing C code to another.
indent understands a substantial amount of C syntax,
but it also tries to cope with incomplete and malformed syntax.
</p>
-Des:
##----------------------------------------
=Pkg: indeview 0.6.6 43 i586
=Sum: Presentation Viewer for OpenOffice.org and KOffice
+Des:
<!-- DT:Rich -->
<p>IndeViewer is a small viewer to show presentations from OpenOffice.org or KOffice without the need to have the Office packages installed.
</p><p>
You need to generate the presentations into a special IndeViewer format. See
/usr/share/doc/packages/indeviewer/ for tools and documentation.
</p>
-Des:
##----------------------------------------
=Pkg: info 4.8 43 i586
=Sum: A Stand-Alone Terminal-Based Info Browser
+Des:
<!-- DT:Rich -->
<p>Info is a terminal-based program for reading documentation of computer programs in the Info format. The GNU Project distributes most of
its on-line manuals in the Info format, so you need a program called
"Info reader" to read the manuals.
</p>
-Des:
##----------------------------------------
=Pkg: initial 0.1 61 i586
=Sum: Initial for Easy Configuration of Hotkeys
+Des:
<!-- DT:Rich -->
<p>Initial is an easy-to-use configuration tool for hotkeys, such as multimedia keys, function keys found on laptops, and special input devices like IR receivers.
</p>
-Des:
##----------------------------------------
=Pkg: initviocons 0.4 334 i586
=Sum: Terminal Initialization for the iSeries Virtual Console
+Des:
<!-- DT:Rich -->
<p>Initviocons can be used on the iSeries platform to recognize terminal features of a telnet client that is connected to the virtual console (similar to a serial console). It probes the terminal via escape sequences to find out the screen size and a suitable TERM type. It also does special initialization if possible (for example, carriage return suppression for Windows telnet clients). On the iSeries platform, it additionally checks for the presence of more than one terminal connected on the same line. See /etc/profile for a usage example.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape 0.44.1 26 i586
=Sum: Inkscape Vector Illustration Program
+Des:
<!-- DT:Rich -->
<p>Inkscape is a vector illustration program for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: inn 2.4.2 41 i586
=Sum: InterNetNews
+Des:
<!-- DT:Rich -->
<p>Rich Salz's InterNetNews news transport system.
</p>
-Des:
##----------------------------------------
=Pkg: input-utils 2005.08.02 37 i586
=Sum: A Set of Utilities for Input Devices
+Des:
<!-- DT:Rich -->
<p>Utilities for input devices. It includes joystick testing and calibration, force feedback testing, and generic event tools.
</p>
-Des:
##----------------------------------------
=Pkg: insserv 1.04.0 42 i586
=Sum: A Program to Arrange Initialization Scripts
+Del:
<!-- DT:Rich -->
<p>This package is required for proper management of your
Linux system.
</p><p>
Remove it only if you are sure that you know what you are doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Insserv enables an installed system init script (boot script)
by reading the comment header of the script
and calculating the dependencies between all scripts.
</p>
-Des:
##----------------------------------------
=Pkg: install-initrd 1.0 72 i586
=Sum: Create initrd for Installation
+Des:
<!-- DT:Rich -->
<p>You can create an initrd for installation. Useful, for example, to set up
a UML or XEN environment.
</p>
-Des:
##----------------------------------------
=Pkg: ipod-sharp 0.6.2 31 i586
=Sum: Library for Interacting with Apple iPod® Devices
+Des:
<!-- DT:Rich -->
<p>ipod-sharp is a library that allows manipulation of the iTunesDB used in
Apple iPod® devices. Currently it supports adding and removing songs and
manipulating existing play lists.
</p>
-Des:
##----------------------------------------
=Pkg: iproute2 2.6.15 39 i586
=Sum: Advanced Routing
+Des:
<!-- DT:Rich -->
<p>This package provides the tools ip, tc, and rtmon needed to use the new and
advanced routing options of the Linux kernel. The SUSE Linux distribution has used this package for network setup since SuSE Linux 8.0.
</p>
-Des:
##----------------------------------------
=Pkg: ipsec-tools 0.6.5 37 i586
=Sum: IPsec Utilities
+Des:
<!-- DT:Rich -->
<p>This is the IPsec-Tools package. This package is needed to
really make use of the IPsec functionality in the version 2.5 and 2.6 Linux kernels. This
package builds:
<ul>
<li>libipsec, a PFKeyV2 library
</li><li>setkey, a program to directly manipulate policies and SAs
</li><li>racoon, an IKEv1 keying daemon
</li></ul>
These sources can be found at the IPsec-Tools home page at:
http://ipsec-tools.sourceforge.net/
</p>
-Des:
##----------------------------------------
=Pkg: iptables 1.3.6 20 i586
=Sum: IP Packet Filter Administration
+Des:
<!-- DT:Rich -->
<p>Iptables is used to set up, maintain, and inspect the
tables of IP packet filter rules in the Linux kernel.
This version requires kernel 2.4.0 or newer.
</p>
-Des:
##----------------------------------------
=Pkg: iptraf 3.0.0 34 i586
=Sum: TCP/IP Network Monitor
+Des:
<!-- DT:Rich -->
<p>IPTraf is a console-based network statistics utility. It gathers
a variety of information such as TCP connection packet and byte counts,
interface statistics and activity indicators, TCP/UDP traffic
breakdowns, and LAN station packet and byte counts.
</p>
-Des:
##----------------------------------------
=Pkg: iputils ss021109 189 i586
=Sum: IPv4and IPv6 Networking Utilities
+Des:
<!-- DT:Rich -->
<p>This package contains some small network tools for IPv4 and IPv6 like
rdisc, ping6, traceroute6, tracepath, and tracepath6.
</p>
-Des:
##----------------------------------------
=Pkg: ipw3945d 1.7.18 29 i586
=Sum: Regulatory Daemon for Intel PRO/Wireless 3945ABG cards
+Des:
<!-- DT:Rich -->
<p>The regulatory daemon is responsible for controlling and configuring
aspects of the hardware required to operate the device within
compliance of various regulatory agencies. This package is needed to run an Intel PRO/Wireless 3945ABG device.
</p>
-Des:
##----------------------------------------
=Pkg: ipxrip 0.7 892 i586
=Sum: IPX Routing Daemon
+Des:
<!-- DT:Rich -->
<p>This is an RIP/SAP daemon for Linux. With this daemon, you can turn your Linux machine
into an IPX router.
</p>
-Des:
##----------------------------------------
=Pkg: ircd 2.11.1p1 20 i586
=Sum: Internet Relay Chat Server
+Des:
<!-- DT:Rich -->
<p>Ircd is a server (daemon) program for Internet Relay
Chat.
</p>
-Des:
##----------------------------------------
=Pkg: irda 0.9.18 24 i586
=Sum: Necessary Tools for Using the Infrared Port
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary scripts and programs for setting up and using
the infrared port for printing or communicating. The start and stop scripts are
prepared to access the UART emulation ('SIR' mode) with 115 kbit/s
data transfer rate. This is supported by most laptops with an infrared
interface.
</p><p>
After starting the infrared protocol manager 'irmanger' with the command
'rcirda start', you can send data to your printer using the device file
/dev/irlpt0. If you like to talk to other computers with infrared interface
or to a mobile phone, you can use the serial emulation provided by the device
file /dev/ircomm0.
</p><p>
Take a look at the README file located in
/usr/share/doc/packages/irda/README and the IRDA HOWTO in
/usr/share/doc/howto/en/IR-HOWTO.gz. If the infrared port on your laptop is
located on an IO or IRQ address other than IO address 0x2f8 (/dev/ttyS1)
or interrupt 3, you should use YaST to change the variables IRDA_PORT and
IRDA_IRQ in the configuration file /etc/rc.config.
</p>
-Des:
##----------------------------------------
=Pkg: irqbalance 0.09 80 i586
=Sum: Balance IRQs on SMP Machines
+Ins:
<!-- DT:Rich -->
<p>Installing this package only makes sense
on SMP machines.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>irqbalance dynamically switches the CPUs for IRQs to prevent cpu0 from being used for all IRQs.
</p>
-Des:
##----------------------------------------
=Pkg: irssi 0.8.10 37 i586
=Sum: A Modular, Secure, and Well Designed IRC Client
+Des:
<!-- DT:Rich -->
<p>Irssi is a modular IRC client for UNIX that currently only has a text mode user
interface. However, 80-90% of the code is not text mode specific, so other UIs could
be created easily. Also, Irssi is not really even IRC specific anymore.
There are already working SILC and ICB modules available. Support for other
protocols, like ICQ and Jabber, could be added some day, too.
</p><p>
It is the code that separates Irssi from ircII, BitchX, epic, and the rest of the text clients. It is not using the ircII code.
</p>
-Des:
##----------------------------------------
=Pkg: isapnp 1.26 524 i586
=Sum: An ISA Plug and Play Configuration Utility
+Des:
<!-- DT:Rich -->
<p>Two programs--one allows the dumping of resource data and generation
of a skeleton configuration file, the other configures ISA PnP hardware
using a configuration file.
</p><p>
For more information, refer to:
/usr/share/doc/packages/isapnp/README.SuSE
</p>
-Des:
##----------------------------------------
=Pkg: iscan 2.3.0.1 24 i586
=Sum: Image Scan--Proprietary Software for Epson Scanners
+Ins:
<!-- DT:Rich -->
<p>This package contains proprietary software.
</p><p>
You must remove the package if you do not accept the license agreement provided in the EAPL file in the directory /usr/share/doc/packages/iscan/.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Find the user guide in the file /usr/share/doc/packages/iscan/userg_revG_e.pdf
</p><p>
Image Scan contains the following parts:
</p><p>
iscan: the program you use to scan your images (see 'man iscan')
</p><p>
libsane-epkowa: an improved driver for Epson scanners (see 'man sane-epkowa')
</p><p>
libesmod: a proprietary library used by iscan
</p><p>
libesint*: proprietary driver libraries used by libsane-epkowa which are available in the seperated package iscan-proprietary-drivers
</p><p>
esfw*.bin: proprietary firmware files which are available in the seperated package iscan-firmware
</p><p>
The proprietary binary-only i386-only libesmod library is provided under the terms of the license agreement provided in the EAPL file in the directory /usr/share/doc/packages/iscan/.
</p><p>
The iscan program is covered by the GNU General Public License with a special exception that allows linking with the libesmod module.
</p><p>
The libsane-epkowa driver is released under the same conditions as the SANE back-ends under the GNU General Public License with a special exception that allows linking a SANE library with other files to produce an executable.
</p><p>
The proprietary driver libraries used by the driver epkowa are only needed for
the following scanners:
</p><p>
libesint1F:
Perfection 1250 / Perfection 1250 PHOTO / GT-7200
</p><p>
libesint23:
Perfection 1260 / Perfection 1260 PHOTO / GT-7300
</p><p>
libesint32:
Perfection 3170 PHOTO / GT-9400
</p><p>
libesint41:
Perfection 2480 PHOTO / GT-F500,
Perfection 2580 PHOTO / GT-F550
</p><p>
libesint43:
Perfection 4180 PHOTO / GT-F600
</p><p>
libesint52:
Perfection 3490 PHOTO / GT-F520,
Perfection 3590 PHOTO / GT-F570
</p><p>
libesint54:
Perfection 4490 PHOTO / GT-X750
</p><p>
libesint66:
Perfection V10 / GT-S600,
Perfection V100 PHOTO / GT-F650,
</p><p>
libesint68:
Perfection V350 PHOTO / GT-F700
</p><p>
Additionally proprietary firmware files are only needed for the following scanners:
</p><p>
esfw41.bin:
Perfection 2480 PHOTO / GT-F500,
Perfection 2580 PHOTO / GT-F550
</p><p>
esfw32.bin:
Perfection 3170 PHOTO / GT-9400UF
</p><p>
esfw52.bin:
Perfection 3490 PHOTO / GT-F520,
Perfection 3590 PHOTO / GT-F570
</p><p>
esfw43.bin:
Perfection 4180 PHOTO / GT-F600
</p><p>
esfw54.bin:
Perfection 4490 PHOTO / GT-X750
</p><p>
esfw66.bin:
Perfection V10 / GT-S600,
Perfection V100 PHOTO / GT-F650
</p><p>
esfw68.bin:
Perfection V350 PHOTO / GT-F700
</p><p>
If your scanner is supported by the driver epkowa but does not need a proprietary module, you can use the free software package iscan-free or it may also work with a driver which is included in the package sane.
</p>
-Des:
##----------------------------------------
=Pkg: iscan-free 2.3.0.1 25 i586
=Sum: Free Image Scan Version with epkowa Driver for Epson Scanners
+Des:
<!-- DT:Rich -->
<p>This version of the Image Scan for Linux software contains only free software.
</p><p>
The proprietary binary-only i386-only "libesint*" driver libraries are available in the separate package iscan-proprietary-drivers.
</p><p>
The "esfw*.bin" firmware files are available in the separate package iscan-firmware.
</p><p>
The proprietary binary-only i386-only "libesmod" library is removed from this package. It is required by the "/usr/bin/iscan" front-end. This package is built without the front-end.
</p><p>
This package contains only the epkowa back-end for SANE, which compiles
and runs natively even on non-i386 platforms. For documentation, see "man sane-epkowa".
</p><p>
Drawbacks:
</p><p>
The free version of the epkowa back-end cannot work for those scanners that require proprietary binary-only i386-only libraries, available in the separate package iscan-proprietary-drivers. At the moment, those scanners are the following models:
</p><p>
Perfection 1250 / GT-7200U,
Perfection 1250 PHOTO,
Perfection 1260 / GT-7300U,
Perfection 1260 PHOTO,
Perfection 2480 PHOTO / GT-F500,
Perfection 2580 PHOTO / GT-F550,
Perfection 3170 PHOTO / GT-9400UF,
Perfection 3490 PHOTO / GT-F520,
Perfection 3590 PHOTO / GT-F570,
Perfection 4180 PHOTO / GT-F600,
Perfection 4490 PHOTO / GT-X750,
Perfection V10 / GT-S600,
Perfection V100 PHOTO / GT-F650,
Perfection V350 PHOTO / GT-F700.
</p><p>
Those models do not work with the free iscan version. Those models require the original iscan package and the iscan-proprietary-drivers package, which are only available for i386-compatible platforms.
</p><p>
Some scanners require proprietary firmware files that are available
in the package iscan-firmware. At the moment, those scanners are the following models:
</p><p>
Perfection 2480 PHOTO / GT-F500,
Perfection 2580 PHOTO / GT-F550,
Perfection 3170 PHOTO / GT-9400UF,
Perfection 3490 PHOTO / GT-F520,
Perfection 3590 PHOTO / GT-F570,
Perfection 4180 PHOTO / GT-F600,
Perfection 4490 PHOTO / GT-X750,
Perfection V10 / GT-S600,
Perfection V100 PHOTO / GT-F650,
Perfection V350 PHOTO / GT-F700.
</p><p>
The front-end /usr/bin/iscan was removed because it requires the proprietary binary-only i386-only "libesmod" library. This should cause no problem because the back-end epkowa runs now natively even on non-i386 platforms so that all the usual front-ends (like scanimage, xscanimage, xsane, and kooka) can be used even on non-i386 platforms.
</p>
-Des:
##----------------------------------------
=Pkg: iscan-proprietary-drivers 2.0.0.1 13 i586
=Sum: Proprietary Driver Libraries for Image Scan for Epson Scanners
+Ins:
<!-- DT:Rich -->
<p>This package contains proprietary software.
</p><p>
You must remove the package if you do not accept the license agreement provided in the EAPL and LICENSE files in the directory /usr/share/doc/packages/iscan-proprietary-drivers/
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>The proprietary binary-only i386-only libraries are provided (in object code form only) under the terms of the license agreement provided in the EAPL and LICENSE files in the directory /usr/share/doc/packages/iscan-proprietary-drivers/
</p><p>
The proprietary libraries used by the driver epkowa are only needed for
the following scanners:
</p><p>
libesint1F:
Perfection 1250 / Perfection 1250 PHOTO / GT-7200
</p><p>
libesint23:
Perfection 1260 / Perfection 1260 PHOTO / GT-7300
</p><p>
libesint32:
Perfection 3170 PHOTO / GT-9400
</p><p>
libesint41:
Perfection 2480 PHOTO / GT-F500,
Perfection 2580 PHOTO / GT-F550
</p><p>
libesint43:
Perfection 4180 PHOTO / GT-F600
</p><p>
libesint52:
Perfection 3490 PHOTO / GT-F520,
Perfection 3590 PHOTO / GT-F570
</p><p>
libesint54:
Perfection 4490 PHOTO / GT-X750
</p><p>
libesint66:
Perfection V10 / GT-S600,
Perfection V100 PHOTO / GT-F650,
</p><p>
libesint68:
Perfection V350 PHOTO / GT-F700
</p><p>
Additionally proprietary firmware files are only needed for the following scanners:
</p><p>
esfw41.bin:
Perfection 2480 PHOTO / GT-F500,
Perfection 2580 PHOTO / GT-F550
</p><p>
esfw32.bin:
Perfection 3170 PHOTO / GT-9400UF
</p><p>
esfw52.bin:
Perfection 3490 PHOTO / GT-F520,
Perfection 3590 PHOTO / GT-F570
</p><p>
esfw43.bin:
Perfection 4180 PHOTO / GT-F600
</p><p>
esfw54.bin:
Perfection 4490 PHOTO / GT-X750
</p><p>
esfw66.bin:
Perfection V10 / GT-S600,
Perfection V100 PHOTO / GT-F650
</p><p>
esfw68.bin:
Perfection V350 PHOTO / GT-F700
</p><p>
The firmware files are provided in the package iscan-firmware.
</p><p>
If your scanner is supported by the driver epkowa but does not need a proprietary module, you can use the free software package iscan-free or it may also work with a driver which is included in the package sane.
</p>
-Des:
##----------------------------------------
=Pkg: ispell 3.2.06 498 i586
=Sum: A Spell Checker
+Des:
<!-- DT:Rich -->
<p>Ispell is a fast, screen-oriented spell checker that shows you your
errors in the context of the original file and suggests possible
corrections when it can figure them out. Compared to UNIX spell, it
is faster and much easier to use. Ispell can also handle languages
other than English. Ispell has a long history and many people have
contributed to the current version--some of the major contributors
include R. E. Gorin, Pace Willisson, Walt Buehring, and Geoff
Kuenning.
</p><p>
You can find a short description in the directory /usr/share/doc/packages/ispell/.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-american 3.2.06 498 i586
=Sum: American ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This package includes a ready American dictionary for ispell. If you install
ispell-british too, check /etc/sysconfig/ispell to see which one the
default English dictionary will be. A short usage description is given
in /usr/share/doc/packages/ispell/README.
The sources for this dictionary are included in the source package of ispell.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-brazilian 1.5 281 i586
=Sum: Brazilian ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready brazilian dictionary for ispell.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-british 3.2.06 498 i586
=Sum: British ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready British dictionary for ispell. If you install
ispell-american too, check /etc/sysconfig/ispell to see which one will be
the default English dictionary. A short usage description is given in
/usr/share/doc/packages/ispell/README.
The sources for this dictionary are included in the source package of ispell.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-czech 1.5 281 i586
=Sum: Czech ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready czech dictionary for ispell.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-danish 1.5 281 i586
=Sum: Danish ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready danish dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-dutch 1.5 281 i586
=Sum: Dutch ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready dutch dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-finnish 1.5 281 i586
=Sum: Finnish ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready finnish dictionary for ispell. A short
usage description is given in /usr/share/doc/packages/ispell/README of
the packages ispell. The sources for this dictionary are included in
the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-french 1.5 281 i586
=Sum: French ispell dictionary
+Des:
<!-- DT:Rich -->
<p>/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-german 1.5 281 i586
=Sum: German ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready German dictionary for ispell.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-hungarian 1.1.1 10 i586
=Sum: Hungarian Ispell Dictionary
+Des:
<!-- DT:Rich -->
<p>Hungarian ispell dictionary.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-italian 1.5 281 i586
=Sum: Italian ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready italian dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-ngerman 1.5 281 i586
=Sum: New German ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready german dictionary for ispell according
the new spelling rules. The name of the dictonary is german to be
able to distinguish it from those of the package igerman.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-norsk 1.5 281 i586
=Sum: Norwegian ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready norwegian dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-polish 1.5 281 i586
=Sum: Polish ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready polish dictionary for ispell.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-spanish 1.5 281 i586
=Sum: Spanish ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready spanish dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: itcl 3.3 457 i586
=Sum: Object Oriented Extension for Tcl
+Des:
<!-- DT:Rich -->
<p>Incr Tcl adds object-oriented programming facilities to Tcl. It
was NOT designed as another whiz-bang, object-oriented programming
language. It is patterned somewhat after C++. It was designed
to support more structured programming in Tcl. Scripts that grow
beyond a few thousand lines become extremely difficult to maintain.
[incr Tcl] attacks this problem in the same way that any object-
oriented programming language would, by providing mechanisms for
data encapsulation behind well-defined interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: ivman 0.6.12 37 i586
=Sum: A Generic Handler for HAL Events
+Des:
<!-- DT:Rich -->
<p>Originally for automounting, it can now be used to run arbitrary commands when events or conditions occur or properties are modified on your hardware (for example, run a command when you close your laptop's lid or run a command when a particular device is attached or a particular CD is inserted).
</p>
-Des:
##----------------------------------------
=Pkg: ivtv 0.8.0 9 i586
=Sum: Driver Implementation for iCompression or Conexant Video Capture Cards
+Des:
<!-- DT:Rich -->
<p>The primary goal of the IVTV project is to provide a "clean room" Linux open
source driver implementation for video capture cards based on the iCompression
iTVC15 or Conexant CX23415/CX23416 MPEG Codec. Examples of such cards are the
Hauppauge PVR 250/350 series of MPEG video capture cards, the Hauppauge "freestyle",
and the AVerMedia M179 AVerTV. The freestyle has not been tested, but it should work
or at least be easy to get working.
</p>
-Des:
##----------------------------------------
=Pkg: ivtv-kmp-bigsmp 0.8.0_2.6.18.2_34 9 i586
=Sum: ivtv driver kernel modules
+Des:
<!-- DT:Rich -->
<p>ivtv driver kernel modules
</p>
-Des:
##----------------------------------------
=Pkg: ivtv-kmp-default 0.8.0_2.6.18.2_34 9 i586
=Sum: ivtv driver kernel modules
+Des:
<!-- DT:Rich -->
<p>ivtv driver kernel modules
</p>
-Des:
##----------------------------------------
=Pkg: ivtv-kmp-xen 0.8.0_2.6.18.2_34 9 i586
=Sum: ivtv driver kernel modules
+Des:
<!-- DT:Rich -->
<p>ivtv driver kernel modules
</p>
-Des:
##----------------------------------------
=Pkg: ivtv-kmp-xenpae 0.8.0_2.6.18.2_34 9 i586
=Sum: ivtv driver kernel modules
+Des:
<!-- DT:Rich -->
<p>ivtv driver kernel modules
</p>
-Des:
##----------------------------------------
=Pkg: jaaa 0.4.0 21 i586
=Sum: JACK and ALSA Audio Analyser
+Des:
<!-- DT:Rich -->
<p>Jaaa (JACK and ALSA Audio Analyser) is an audio signal generator and spectrum analyzer designed to make accurate measurements.
</p>
-Des:
##----------------------------------------
=Pkg: jack 0.102.20 16 i586
=Sum: Jack Audio Connection Kit
+Des:
<!-- DT:Rich -->
<p>JACK is a low-latency audio server written primarily for the Linux operating system. It can connect a number of different applications to an audio device, as well as allow them to share audio between themselves. Its clients can run in their own processes (as a normal application), or they can run within a JACK server (as a plug-in).
</p>
-Des:
##----------------------------------------
=Pkg: jack-devel 0.102.20 16 i586
=Sum: Development package for jack
+Des:
<!-- DT:Rich -->
<p>This package contains the files needed to compile programs that
communicates jack clients/servers.
</p>
-Des:
##----------------------------------------
=Pkg: jack-rack 1.4.4 43 i586
=Sum: LADSPA Effects Rack for JACK
+Des:
<!-- DT:Rich -->
<p>JACK Rack is a stereo LADSPA effects rack for the JACK audio API. You can insert LADSPA effects through JACK Rack. It uses GTK+ 2 for the GUI.
</p>
-Des:
##----------------------------------------
=Pkg: jackEQ 0.4.0 101 i586
=Sum: JACK Equalization Tool for Live Performance
+Des:
<!-- DT:Rich -->
<p>jackEQ is a tool for routing and manipulating audio from and to multiple
input/output sources. It runs in the JACK Audio Connection Kit and
uses LADSPA for its back-end DSP work. jackEQ is designed specifically
for live performance.
</p>
-Des:
##----------------------------------------
=Pkg: jadetex 3.13 254 i586
=Sum: TeX Processor for OpenJade
+Des:
<!-- DT:Rich -->
<p>With Sebastian Rahtz's macro package jadetex, it is possible to process
the output of the TeX back-end for OpenJade and produce DVI or PDF files. Resulting DVI files are viewable with xdvi or printable like any other DVI file.
<p>This package contains browser plugin files for java-1.4.2-sun. Note: this package supports browsers built with GCC 3.2 and later.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_5_0-sun 1.5.0_update8 19 i586
=Sum: Java(TM) 5 Runtime Environment
+Des:
<!-- DT:Rich -->
<p>Java(TM) 5 Runtime Environment
</p><p>
The Java(TM) 5 Runtime Environment contains the Java virtual machine, runtime class libraries, and Java application launcher that are necessary to run programs written in the Java progamming language. It is not a development environment and does not contain development tools such as compilers and debuggers. For development tools, see the java-1.5.0-sun-devel package.
</p><p>
The Java 5 Runtime Environment is intended for software developers and vendors who wish to redistribute their applications.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_5_0-sun-alsa 1.5.0_update8 19 i586
=Sum: ALSA support for java-1_5_0-sun
+Des:
<!-- DT:Rich -->
<p>This package contains Advanced Linux Sound Architecture (ALSA) support libraries for java-1_5_0-sun.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_5_0-sun-devel 1.5.0_update8 19 i586
=Sum: Java(TM) 5 SDK, Standard Edition
+Des:
<!-- DT:Rich -->
<p>The Java 5 SDK is a development environment for building applications, applets, and components using the Java programming language.
</p><p>
The Java 5 SDK includes tools useful for developing and testing programs written in the Java programming language and running on the Java platform. These tools are designed to be used from the command line. Except for the appletviewer, these tools do not provide a graphical user interface.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_5_0-sun-jdbc 1.5.0_update8 19 i586
=Sum: JDBC/ODBC bridge driver for java-1_5_0-sun
+Des:
<!-- DT:Rich -->
<p>This package contains the JDBC/ODBC bridge driver for java-1_5_0-sun.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_5_0-sun-plugin 1.5.0_update8 19 i586
=Sum: Browser plugin files for java-1_5_0-sun
+Des:
<!-- DT:Rich -->
<p>This package contains browser plugin files for java-1_5_0-sun. Note: this package supports browsers built with GCC 3.2 and later
</p>
-Des:
##----------------------------------------
=Pkg: jfbterm 0.3.10 549 i586
=Sum: Framebuffer Terminal to Display Japanese Characters
+Des:
<!-- DT:Rich -->
<p>JFBTERM is a program to display Japanese Kanji characters using the
framebuffer. Similar to the well-known program kon, it uses
a terminal emulator on the console and hooks into its output.
But JFBTERM does not use VGA (like kon does). It uses the framebuffer
instead.
</p>
-Des:
##----------------------------------------
=Pkg: jfsutils 1.1.11 20 i586
=Sum: IBM JFS Utility Programs
+Des:
<!-- DT:Rich -->
<p>This package contains utilities for managing IBM's Journaled File System (JFS) under Linux. The
following utilities are available:
</p><p>
o fsck.jfs--initiate replay of the JFS transaction log and check and repair a JFS formatted device
o logdump--dump a JFS formatted device's journal log
o logredo--replay a JFS formatted device's journal log
o mkfs.jfs--create a JFS formatted partition
o xchkdmp--dump the contents of a JFS fsck log file created with xchklog
o xchklog--extract a log from the JFS fsck workspace into a file
o xpeek--shell-type JFS file system editor
</p>
-Des:
##----------------------------------------
=Pkg: joe 3.5 20 i586
=Sum: A Text Editor
+Des:
<!-- DT:Rich -->
<p>JOE (Joe's Own Editor) is a freeware ASCII editor for UNIX. Joe is similar to
most IBM PC text editors. The keyboard combinations are similar to WordStar[tm]
and Turbo C. Some of Joe's features include:
</p><p>
-full support of termcap and terminfo
(useful for device-independent descriptions to control screen output)
-optimized screen refresh like GNU Emacs (Joe can even be used at 2400 baud)
-easy installation with all features for UNIX integration with vi: a marked block of
text can be filtered through a UNIX command and wherever JOE accepts a
filename parameter, the following can also be substituted:
</p><p>
!command\t\t:to redirect from or to another command
</p><p>
>>filename\t\t:to append onto an existing file
</p><p>
filename,start,size\t:to edit a part of a file or device
</p><p>
-\t\t\t:to use standard input/output
</p><p>
When JOE has several files opened at the same time, each file is
displayed in its own window. Additionally, JOE allows for shell windows
from which the output of the executed commands are saved in a buffer,
automatic filename completion (via TAB), help windows, undo and redo,
and search and replace using regular expressions.
</p>
-Des:
##----------------------------------------
=Pkg: joy2key 1.6.1 37 i586
=Sum: For Using the Joystick with Keyboard-Based Applications
+Des:
<!-- DT:Rich -->
<p>This package allows you to control applications accepting keyboard commands with your joystick. It does not work with all applications, however, because some do not accept synthetic events for security reasons.
</p>
-Des:
##----------------------------------------
=Pkg: jpackage-utils 1.7.0 19 i586
=Sum: JPackage Utilities
+Des:
<!-- DT:Rich -->
<p>Utilities for the JPackage project <http://www.jpackage.org/>.
</p>
-Des:
##----------------------------------------
=Pkg: jpeg 6b 771 i586
=Sum: Independent JPEG Group's JPEG Software
+Des:
<!-- DT:Rich -->
<p>Software to implement JPEG image compression and decompression. JPEG
(pronounced "jay-peg") is a standardized compression method for
full-color and grayscale images. JPEG is intended for compressing
"real-world" scenes (most of the time these are pictures that have
been scanned-in with a scanner or taken with a digital camera).
Cartoons and other nonrealistic images
are not its strong suit. It should be noted that JPEG output is not
necessarily the same as its input. If this is a factor for you,
do not use it. With typical real-world scenes, JPEG can achieve
high compression rates without noticeable differences. If
you can accept pictures of lower quality, JPEG can achieve amazingly
high compression rates.
</p><p>
There are some library functions available for reading and writing
JPEG files. The 'cjpeg' and 'djpeg' applications use the library to
make conversions between JPEG and other popular graphic file formats
possible. The JPEG library is meant to be used within other applications.
</p><p>
Cjpeg compresses the input file, or standard input if no filename
is given, and produces a JPEG/JFIF file as standard output. Currently
supported input file formats include: PPM (PBMPLUS color format),
Toolkit Format) (RLE is only supported if the RLE library is
available). Djpeg decompresses a JPEG file into one of the above
mentioned formats.
</p>
-Des:
##----------------------------------------
=Pkg: jtools 1.0 589 i586
=Sum: Ken Lunde's Japanese Code Manipulation Tools
+Des:
<!-- DT:Rich -->
<p>This is Ken Lunde's suite of Japanese and CJKV code manipulation
tools. It consists of:
<ul>
<li>CJKVConv.pl (a cross-locale CJKV code converter)
</li><li>jconv, a general-purpose Japanese code conversion tool
(JIS, Shift-JIS, EUC)
</li><li>jcode, a Japanese code inspection tool (JIS, Shift-JIS, EUC)
that reads the input file and creates an output file
containing all of the characters within the input file along with their
electronic codes in octal, decimal, or hexadecimal
notation (the default, if none specified, is hexadecimal)
</li><li>jchar, a generator for various Japanese character sets
(JIS, Shift-JIS, EUC)
</li><li>jgrep, a simplified GREP-like utility that recognizes
two-byte character sequences in Japanese Shift-JIS or EUC code
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: k3b 0.12.17 31 i586
=Sum: A Universal CD and DVD Burning Application
+Des:
<!-- DT:Rich -->
<p>K3b is a CD burning application that supports Ogg Vorbis, MP3 audio files, DVD burning, CDDB, and much more.
</p>
-Des:
##----------------------------------------
=Pkg: kadslwatch 01.00.06 44 i586
=Sum: Monitor for Fritz!Card DSL Controllers
+Des:
<!-- DT:Rich -->
<p>Kadslwatch is a monitor for the K Desktop Environment to inform about the
status of an ADSL connection with Fritz!Card DSL (PCI and USB).
This tool resides in the toolbar on the KDE desktop.
On establishment of an ADSL connection kadslwatch pops up a window
with more detailed information.
This only works with AVM's Fritz!Card DSL controllers.
</p>
-Des:
##----------------------------------------
=Pkg: kaffeine 0.8.2 35 i586
=Sum: Xine-Based Multimedia Player
+Des:
<!-- DT:Rich -->
<p>Kaffeine plays all files and devices supported by Xine.
For example, MPEG files, AVI (if the codec being used is supported by Xine), MP3, and Ogg Vorbis. It also handles Video CDs, DVDs, and DVB cards.
</p>
-Des:
##----------------------------------------
=Pkg: kaffeine-gstreamer 0.8.2 35 i586
=Sum: Multimedia Player using Gstreamer
+Des:
<!-- DT:Rich -->
<p>This plugin enables Kaffeine to play via the Gstreamer framework instead of Xine.
</p><p>
The gstreamer backend can only get used for the visualization of audio sources.
</p>
-Des:
##----------------------------------------
=Pkg: kakasi 2.3.4 419 i586
=Sum: Filter to Convert Kanji Characters to Hiragana, Katakana, or Romaji
+Des:
<!-- DT:Rich -->
<p>KAKASI is the language processing filter to convert Kanji characters
to Hiragana, Katakana, or Romaji(1) and may be helpful for reading Japanese
documents. The word-splitting patch is merged from version 2.3.0.
</p><p>
</p><p>
The name "KAKASI" is the abbreviation of "kanji kana simple
inverter" and the inverse of SKK "simple kana kanji converter"
developed by Masahiko Sato at Tohoku University. Most entries
of the kakasi dictionary are derived from the SKK dictionaries. If
interested in the naming of KAKASI, consult a Japanese-English
dictionary.
</p><p>
</p><p>
(1) "Romaji" is an alphabetical description of Japanese pronunciation.
</p>
-Des:
##----------------------------------------
=Pkg: kakasi-devel 2.3.4 419 i586
=Sum: header file and libraries of KAKASI
+Des:
<!-- DT:Rich -->
<p>header file and libraries of KAKASI
</p>
-Des:
##----------------------------------------
=Pkg: kakasi-dict 2.3.4 419 i586
=Sum: The base dictionary of KAKASI
+Des:
<!-- DT:Rich -->
<p>The base dictionary of KAKASI
</p>
-Des:
##----------------------------------------
=Pkg: kalsatools 1.5.0 391 i586
=Sum: KDE Tools for ALSA
+Des:
<!-- DT:Rich -->
<p>KAlsaTools implements five programs. KAConnect displays all the ports of the
ALSA MIDI sequencer and lets you open and close connections between them. The scope and spectrum analyzer, KWaveView, visualizes sound data captured from Line In or Mic In. QMidiControl is a virtual MIDI controller box. QMidiRoute is a flexible routing utility for MIDI events. QARecord is a simple WAV recording program.
</p>
-Des:
##----------------------------------------
=Pkg: kanji-lookup 1.0 679 i586
=Sum: Simple Program That Allows Kanji Lookup Using Radical Tables
+Des:
<!-- DT:Rich -->
<p>This small program allows Kanji lookup using radicals and common elements.
The design goal of this was to make it as efficient to use as possible. A possible
use for this is looking up unfamiliar characters for which you cannot remember
the reading. The result is placed into the X11 cut buffer ready to paste into a
dictionary program, word processor, etc.
</p>
-Des:
##----------------------------------------
=Pkg: kanjipad 2.0.0 231 i586
=Sum: Japanese Handwriting Recognition
+Des:
<!-- DT:Rich -->
<p>KanjiPad is a very simple program for handwriting recognition.
The user draws a character into the box, then requests translation.
The best candidates are displayed along the right hand side of
the window and can be selected for pasting into other programs.
</p><p>
It is meant primarily for dictionary purposes for learners of Japanese.
It does not support entering kana, so its usefulness as an input
method is limited. Furthermore, if you already know the reading of a
character, conventional pronunciation-based methods of entering the
character are probably faster.
</p><p>
However, KanjiPad is sometimes useful for entering very unusual
characters, even if the pronunciation is known, because
pronunciation-based input methods often fail for rarely used characters.
</p>
-Des:
##----------------------------------------
=Pkg: kasumi 2.0.1 25 i586
=Sum: Dictionary Tool for Anthy
+Des:
<!-- DT:Rich -->
<p>A graphical tool to edit the personal dictionary for Anthy.
</p>
-Des:
##----------------------------------------
=Pkg: kbarcode 2.0.5 9 i586
=Sum: Barcode and Label Printing Application
+Des:
<!-- DT:Rich -->
<p>KBarcode is a barcode and label printing application for KDE 3. It can
be used to print everything from simple business cards up to complex
labels with several barcodes (such as article descriptions). KBarcode
comes with an easy-to-use WYSIWYG label designer, a setup wizard,
batch import of labels (directly from the delivery note), thousands
of predefined labels, database management tools, and translations
in many languages. Even printing more than ten thousand labels in one go is
no problem for KBarcode. Additionally it is a simple xbarcode
replacement for the creation of barcodes. All major types of barcodes,
like EAN, UPC, CODE39, and ISBN, are supported.
</p>
-Des:
##----------------------------------------
=Pkg: kbd 1.12 88 i586
=Sum: Keyboard and Font Utilities
+Del:
<!-- DT:Rich -->
<p>This package is required for proper keyboard support
if you are not using a US keyboard layout.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Load and save keyboard mappings. This is needed if you are not using the US
keyboard map. This package also contains utilities for changing your
console fonts. If you install this package, YaST includes an extra
menu to allow you to choose between the different fonts.
This package also includes fonts from the kbd_fonts.tar.gz
package (by Paul Gortmaker) on Sunsite.
</p>
-Des:
##----------------------------------------
=Pkg: kbiff 3.8 47 i586
=Sum: An Application to Check for New E-Mail
+Des:
<!-- DT:Rich -->
<p>KBiff docks to the KDE panel (Kicker) and shows incoming e-mail.
</p>
-Des:
##----------------------------------------
=Pkg: kcall 0.5.2svn20060206 50 i586
=Sum: SIP (Voice over IP) Solution for KDE and Kontact
+Des:
<!-- DT:Rich -->
<p>KCall is the telephony application of Kontact. It supports computer telephony integration and at the same time integration into KDE's infrastructure. KCall does this by using KDE's address book, which in turn can be a server-based groupware address book.
</p>
-Des:
##----------------------------------------
=Pkg: kcm_gtk 0.7cvs20060209 25 i586
=Sum: KDE control module for switching GTK+ style
+Des:
<!-- DT:Rich -->
<p>This KDE control module allows to choose the style of GTK+ applications.
</p>
-Des:
##----------------------------------------
=Pkg: kdar 2.0.7 43 i586
=Sum: Backup and Restore Utility
+Des:
<!-- DT:Rich -->
<p>KDar uses libdar and supports its features, like incremental backups or backups using different media. It can also handle file system attributes like ACL and use filter rules.
</p>
-Des:
##----------------------------------------
=Pkg: kdbg 2.0.4 30 i586
=Sum: Graphical User Interface for GDB
+Des:
<!-- DT:Rich -->
<p>KDbg is a graphical user interface for GDB, the GNU debugger. It provides an intuitive interface for setting breakpoints, inspecting variables, and stepping through code.
</p>
-Des:
##----------------------------------------
=Pkg: kdeaccessibility3 3.5.5 24 i586
=Sum: Tools for Handicapped People to Use the GUI
+Des:
<!-- DT:Rich -->
<p>KMag: Magnifies a part of the screen.
KMouseTool: Clicks the mouse for you, reducing hand strain.
KMouth: The computer "speaks" the entered text for talking with people.
KSayIt: Edit and read documents via KDE text-to-speech output.
KTTSD: The KDE Text To Speech Daemon, which can be used from any KDE application that uses the interface from kdelibs.
</p>
-Des:
##----------------------------------------
=Pkg: kdeaddons3-games 3.5.5 5 i586
=Sum: Additional Modules for Atlantik
+Des:
<!-- DT:Rich -->
<p>An editor to create levels for Atlantik
</p>
-Des:
##----------------------------------------
=Pkg: kdeaddons3-kate 3.5.5 5 i586
=Sum: A text editor for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains extensions for kate, the default KDE text editor. The extensions are able to check the syntax of html or xml documents and are used to convert to different text formats and encodings.
</p>
-Des:
##----------------------------------------
=Pkg: kdeaddons3-kicker 3.5.5 5 i586
=Sum: KDE kicker applets
+Des:
<!-- DT:Rich -->
<p>This package contains Kicker (the KDE panel) applets to monitor the time on all regions on earth and to select a color from any place on the desktop.
</p>
-Des:
##----------------------------------------
=Pkg: kdeaddons3-konqueror 3.5.5 5 i586
=Sum: Konqueror Related Add-Ons
+Des:
<!-- DT:Rich -->
<p>This package contains web-related (like checking for correct HTML syntax, translating a web site, or to easily enable/disable browser functions) and file-related (like image gallery creator, image view kpart, ark archiver plugin, kuick copy plugin) Konqueror plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: kdeaddons3-kontact 3.5.5 5 i586
=Sum: Additional Modules for Kontact
+Des:
<!-- DT:Rich -->
<p>This package contains plugins for Kontact. They can be used on the
<ul>
<li>newsticker plugin
</li><li>world clock
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdeaddons3-sound 3.5.5 5 i586
=Sum: Plugins for noatun
+Des:
<!-- DT:Rich -->
<p>This package contains plugins for noatun. They can be used to modify or visualize sound or to edit metadata tags in MP3 and Ogg files.
</p>
-Des:
##----------------------------------------
=Pkg: kdeadmin3 3.5.5 27 i586
=Sum: KDE System Administration
+Des:
<!-- DT:Rich -->
<p>A few programs for KDE system administration.
<ul>
<li>kcron - cronjobs configuration
</li><li>kdat - dat streamer tool
</li><li>kpackage - rpm handling tool
</li><li>ksysv - runlevel editor
</li><li>kuser - user account manager
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdeartwork3 3.5.5 28 i586
=Sum: KDE Themes
+Des:
<!-- DT:Rich -->
<p>This package contains the KDE window manager and icon themes.
</p>
-Des:
##----------------------------------------
=Pkg: kdeartwork3-kscreensaver 3.5.5 28 i586
=Sum: Screensaver from KDE
+Des:
<!-- DT:Rich -->
<p>This package has a pretty small but nice collection of screensavers
for KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdeartwork3-sound 3.5.5 28 i586
=Sum: Sound themes for KDE
+Des:
<!-- DT:Rich -->
<p>extra sound files for KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdeartwork3-xscreensaver 3.5.5 28 i586
=Sum: XScreensaver Support for KDE
+Des:
<!-- DT:Rich -->
<p>This package allows using the more than 100 screensavers in
the xscreensaver package for KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3 3.5.5 78 i586
=Sum: The KDE Core Components
+Des:
<!-- DT:Rich -->
<p>This package contains kdebase, one of the basic packages of the K
Desktop Environment. It contains, among others, kwin (the KDE window
manager), Konqueror (the KDE Web browser), and KControl (the configuration program)
</p><p>
This package is needed if you want to use the KDE Desktop.
It is not needed if you only want to start some KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-SuSE 10.2 84 i586
=Sum: SUSE KDE Extension
+Des:
<!-- DT:Rich -->
<p>This package contains the standard SUSE desktop and menu extensions for the
Kpanel.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-beagle 3.5.5 78 i586
=Sum: Beagle dependent plugins for KDE desktop
+Des:
<!-- DT:Rich -->
<p>This package contains kdebase plugins which provide additional search functionality via Beagle.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-devel 3.5.5 78 i586
=Sum: KDE Base Package: Base, Build Environment
+Des:
<!-- DT:Rich -->
<p>This package contains KDEbase, one of the basic packages of the K
Desktop Environment. It contains, among other things, KWIN, the KDE window
manager; Konqueror, the KDE web and file browser; and KControl, the KDE configuration program.
</p><p>
</p><p>
This package is not needed if you do not want to compile high level KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-extra 3.5.5 78 i586
=Sum: KDE Base package: Extra Applications
+Des:
<!-- DT:Rich -->
<p>This package contains applications which are usually not needed on SuSE Linux.
<ul>
<li>kappfinder - adds menu entries for applications
</li><li>kpersonalizer - sets different settings
</li><li>khotkeys aRts support - for voice triggered shortcuts
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdebase3-kdm 3.5.5 78 i586
=Sum: The KDE login and display manager
+Des:
<!-- DT:Rich -->
<p>This package contains kdm, the login and session manager for KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-ksysguardd 3.5.5 78 i586
=Sum: KDE base package: ksysguard daemon
+Des:
<!-- DT:Rich -->
<p>This package contains the ksysguard daemon. It is needed for ksysguard.
</p><p>
This package can be installed on servers without any other KDE packages to guard the system from remote computers.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-nsplugin 3.5.5 78 i586
=Sum: Netscape plugin support for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains support for Netscape plug-ins in konqueror.
You have to enable JavaScript for this.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-samba 3.5.5 78 i586
=Sum: KDE Base package: Windows Connection Module
+Des:
<!-- DT:Rich -->
<p>This package provides the "smb://" protocol, to connect to and from Windows and Samba shares.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-session 3.5.5 78 i586
=Sum: The KDE Session
+Des:
<!-- DT:Rich -->
<p>This package contains the startup scripts necessary to start a KDE session from kdm.
</p>
-Des:
##----------------------------------------
=Pkg: kdebindings3 3.5.5 29 i586
=Sum: Bindings for Qt and KDE Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains generator applications for creating bindings for specific languages from Qt and KDE header files.
</p>
-Des:
##----------------------------------------
=Pkg: kdebindings3-javascript 3.5.5 29 i586
=Sum: JavaScript Bindings and Interpreter for KDE
+Des:
<!-- DT:Rich -->
<p>Required libraries to write applications in Java for Qt and KDE.
</p><p>
Additionally, it also contains KJSEmbed, which is a command line interpreter for executing JavaScript applications. You can very easily write small KDE applications using it.
</p><p>
These applications are not running in a sandbox, so they have access to all files, as does every other application.
</p>
-Des:
##----------------------------------------
=Pkg: kdebindings3-perl 3.5.5 29 i586
=Sum: DCOP Perl Bindings for KDE
+Des:
<!-- DT:Rich -->
<p>A Perl module for making DCOP calls from Perl code.
</p>
-Des:
##----------------------------------------
=Pkg: kdebindings3-python 3.5.5 29 i586
=Sum: Python Bindings for KDE
+Des:
<!-- DT:Rich -->
<p>Needed libraries for writing applications in Python for Qt and KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdebindings3-ruby 3.5.5 29 i586
=Sum: Ruby Bindings for Qt and KDE Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the needed environment for writing Qt applications in Ruby.
</p>
-Des:
##----------------------------------------
=Pkg: kdebluetooth 0.99.0svn576598 38 i586
=Sum: Bluetooth Support for KDE
+Des:
<!-- DT:Rich -->
<p>To exchange files and data easily via Bluetooth.
<ul>
<li>kbluetoothd--a tray applet to handle incoming inquiries
</li><li>kbtobexclient--to send files via bluetooth
</li><li>kbtserialchat--a serial terminal for a bluetooth device
</li><li>irmsynckonnector--an irm kresource, especially useful for kitchensync
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdeedu3 3.5.5 25 i586
=Sum: Education Applications
+Des:
<!-- DT:Rich -->
<p><li>keduca: creation and revision of form-based tests and exams
</li><li>kgeo: interactive geometry
</li><li>khangman: hangman game--guess a word letter by letter
</li><li>klatin: aims to help revise or learn Latin
</li><li>klettres: helps to learn the French alphabet and read some syllables
</li><li>kmessedwords: simple mind-training game
</li><li>kstars: desktop planetarium
</li><li>ktouch: program for learning touch typing
</li><li>kvoctrain: vocabulary trainer
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdegames3 3.5.5 25 i586
=Sum: Games for KDE
+Des:
<!-- DT:Rich -->
<p>The base libraries for kdegames as well as the games Solitaire and Minesweeper. The other games are in:
</p><p>
kdegames3-arcade
kdegames3-board
kdegames3-card
kdegames3-tactic
</p>
-Des:
##----------------------------------------
=Pkg: kdegames3-arcade 3.5.5 25 i586
=Sum: Arcade games for KDE
+Des:
<!-- DT:Rich -->
<p>Several arcade style games. Hunting asteroids, the famous Tetris, and Tron are just an example of what is included.
</p>
-Des:
##----------------------------------------
=Pkg: kdegames3-board 3.5.5 25 i586
=Sum: KDE board games
+Des:
<!-- DT:Rich -->
<p>Board games like Backgammon, battleship, Mahjongg, and 4 wins.
</p>
-Des:
##----------------------------------------
=Pkg: kdegames3-card 3.5.5 25 i586
=Sum: Card games for KDE
+Des:
<!-- DT:Rich -->
<p>Card games for KDE. Poker and Skat.
</p>
-Des:
##----------------------------------------
=Pkg: kdegames3-tactic 3.5.5 25 i586
=Sum: Tactic and logic games for KDE
+Des:
<!-- DT:Rich -->
<p>Famous games for the time you should spend working:
Sokoban, Same, and more.
</p>
-Des:
##----------------------------------------
=Pkg: kdegraphics3 3.5.5 30 i586
=Sum: Base Libraries for KDE Graphics Applications
+Des:
<!-- DT:Rich -->
<p>The base applications and libraries for KDE graphics applications.
</p><p>
All kfile plug-ins (to generate previews in konqueror) are also in this package.
</p><p>
More kdegraphics applications can be found in:
<ul>
<li>kdegraphics3-fax
</li><li>kdegraphics3-kamera
</li><li>kdegraphics3-pdf
</li><li>kdegraphics3-postscript
</li><li>kdegraphics3-imaging
</li><li>kdegraphics3-scan
</li><li>kdegraphics3-tex
</li><li>kdegraphics3-extra
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdegraphics3-3D 3.5.5 30 i586
=Sum: 3D Scene Creator
+Des:
<!-- DT:Rich -->
<p></p><p>
KPovModeler can create scenes for rendering with POV-Ray.
</p>
-Des:
##----------------------------------------
=Pkg: kdegraphics3-devel 3.5.5 30 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: kdegraphics3-extra 3.5.5 30 i586
=Sum: Small KDE Graphics Applications
+Des:
<!-- DT:Rich -->
<p>Small KDE graphics applications.
<ul>
<li>kcolorchooser - identify color values.
</li><li>kcoloredit - for editing color palettes
</li><li>kruler - a desktop ruler for measuring pixels
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdegraphics3-fax 3.5.5 30 i586
=Sum: KDE fax viewer
+Des:
<!-- DT:Rich -->
<p>This package can show and print received fax files.
</p>
-Des:
##----------------------------------------
=Pkg: kdegraphics3-imaging 3.5.5 30 i586
=Sum: Image-Related KDE Applications
+Des:
<!-- DT:Rich -->
<p><li>kiconedit - icon editor
</li><li>kolourpaint - simple paint application
</li><li>kview - another modular picture viewer
</li><li>kuickshow - a fast picture viewer
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdegraphics3-kamera 3.5.5 30 i586
=Sum: KDE digital camera application
+Des:
<!-- DT:Rich -->
<p>Kamera is a konqueror plugin for digital cameras. It is mostly used for cameras that are connected via serial port, while usb-cameras are directly supported by the kernel.
</p>
-Des:
##----------------------------------------
=Pkg: kdegraphics3-pdf 3.5.5 30 i586
=Sum: KDE PDF File Viewer
+Des:
<!-- DT:Rich -->
<p>This package contains KPDF, an application to show and print PDF files.
</p>
-Des:
##----------------------------------------
=Pkg: kdegraphics3-postscript 3.5.5 30 i586
=Sum: KDE Postscript File Viewer
+Des:
<!-- DT:Rich -->
<p>This package contains KGhostView, an application to show and print Postscript
files.
</p>
-Des:
##----------------------------------------
=Pkg: kdegraphics3-scan 3.5.5 30 i586
=Sum: Kooka, the Scanning Program for KDE
+Des:
<!-- DT:Rich -->
<p>Kooka is an image scanning program for KDE that uses the SANE library. This offers scan capabilities to a wide range of scanner hardware.
</p><p>
As well as a user-friendly interface, Kooka offers basic image manipulation routines like rotating, mirroring, etc. Additionally, it has a save assistant that helps to find the correct image format. The image gallery
and a configurable thumbnail view makes it easy to organize the scans.
</p><p>
Kooka supports OCR (Optical Character Recognition) on your scans. Two open source OCR programs, <a href="pkg://ocrad">ocrad</a>
and
<a href="pkg://gocr">gocr</a> are available as plugins to Kooka.
</p>
-Des:
##----------------------------------------
=Pkg: kdegraphics3-tex 3.5.5 30 i586
=Sum: DVI File Viewer
+Des:
<!-- DT:Rich -->
<p>KDVI shows and prints DVI files. DVI files are generated by TeX and LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3 3.5.5 45 i586
=Sum: KDE Base Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains kdelibs, one of the basic packages of the K
Desktop Environment. It contains the necessary libraries for the KDE desktop.
</p><p>
This package is absolutely necessary for using KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-arts 3.5.5 45 i586
=Sum: KDE aRts support
+Des:
<!-- DT:Rich -->
<p>This package contains bindings and gui elements for using aRts sound daemon.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-devel 3.5.5 45 i586
=Sum: KDE Base Package: Build Environment
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-doc 3.5.5 45 i586
=Sum: Documentation for KDE Base Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the core environment and templates for the KDE help system.
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3 3.5.5 30 i586
=Sum: KDE Multimedia Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the base libraries for KDE multimedia programs.
It also contains the kfile plug-ins for Konqueror (to show additional information about multimedia files).
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3-CD 3.5.5 30 i586
=Sum: KDE Audio CD Tools
+Des:
<!-- DT:Rich -->
<p>This package contains tools to play or read Audio CDs.
</p><p>
KAudioCreator - A program to read a CD and write it to the hard disk. It also
provides a title editor.
audiocd:/ - A kio_slave, enabling Konqueror to show the contents of audio CDs
and to read the data.
</p><p>
All applications support CDDB which can be configured using the CDDB control center module, also provided by this package.
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3-devel 3.5.5 30 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3-extra 3.5.5 30 i586
=Sum: Additional KDE Sound Applications
+Des:
<!-- DT:Rich -->
<p>This package includes applications for your soundcard:
</p><p>
artsbuilder - to setup complex filter rules for the aRts daemon
Kaboodle - a small player application for sound files
KRec - a recording tool. Records from any configured aRts input source.
KsCD - The KDE CD Player
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3-jukebox 3.5.5 30 i586
=Sum: KDE Jukebox for MP3 and Ogg Vorbis Files
+Des:
<!-- DT:Rich -->
<p>Juk the KDE Jukebox can handle a large number of MP3 or Ogg Vorbis files. It has a very fast search and you can easily edit the title information, even for multiple files at the same time. It can also guess the title information based on file names or by its content with MusicBrainz.
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3-midi 3.5.5 30 i586
=Sum: KDE MIDI File Player
+Des:
<!-- DT:Rich -->
<p>This package includes:
KMid - plays MIDI files via the hardware support on the sound card
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3-mixer 3.5.5 30 i586
=Sum: KDE sound mixer
+Des:
<!-- DT:Rich -->
<p>This package includes applications for your soundcard:
</p><p>
kmix - to set all the channels of your soundcard and to define
the recording source
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3-sound 3.5.5 30 i586
=Sum: KDE sound applications and plugins
+Des:
<!-- DT:Rich -->
<p>This package includes applications for your soundcard:
</p><p>
artsbuilder - to setup complex filter rules for the arts daemon
</p><p>
several plugins to play all kind of medias with the kde multimedia sound system (MP3, Ogg, Flac)
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3-video 3.5.5 30 i586
=Sum: KDE Video Player
+Des:
<!-- DT:Rich -->
<p>This package contains the video player Noatun. Noatun is a very modular player with a lot of plugins (have a look in the kdeaddons3-noatun package).
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3-video-xine 3.5.5 30 i586
=Sum: Xine plugin for Noatun
+Des:
<!-- DT:Rich -->
<p>The package provides a Xine plugin for Noatun. Xine is a very powerful and complete video player library.
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork3 3.5.5 29 i586
=Sum: KDE Network Libraries
+Des:
<!-- DT:Rich -->
<p>Required libraries for the following packages:
</p><p>
kdenetwork3-chat
kdenetwork3-dialup
kdenetwork3-lan
kdenetwork3-mail
kdenetwork3-news
kdenetwork3-query
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork3-IRC 3.5.5 29 i586
=Sum: IRC application for KDE
+Des:
<!-- DT:Rich -->
<p>IRC chat application ksirc.
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork3-InstantMessenger 3.5.5 29 i586
=Sum: Chat applications for KDE
+Des:
<!-- DT:Rich -->
<p>The standard KDE application for instant messaging chat.
</p><p>
Kopete is an IM client with support for AOL (Oscar), ICQ, Jabber (including Google Talk), MSN, Novell GroupWise Messenger, Yahoo, WinPopup, and IRC.
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork3-dialup 3.5.5 29 i586
=Sum: KPPP Modem Dialing Tool
+Des:
<!-- DT:Rich -->
<p>KPPP is a tool for Internet dialup via modem.
</p><p>
The default tool on SuSE is KInternet, which also handles ISDN and DSL.
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork3-lan 3.5.5 29 i586
=Sum: LAN Applications
+Ins:
<!-- DT:Rich -->
<p>You need a running LISA server to use the "lan://" service.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Applications for local networks:
</p><p>
kio_lan: shows open services in the local network. It requires a running
LISA daemon on the network.(kdenetwork3-lisa package)
kxmlrpcd: XMLRPC-DCOP-daemon
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork3-lisa 3.5.5 29 i586
=Sum: Network Scanner Daemon
+Des:
<!-- DT:Rich -->
<p>LISA scans your network for active hosts and offered services. These services can be used in Konqueror by using the URL "lan://localhost". You can set the variable USE_LISA to "server" in the YaST sysconfig editor, if you want to offer these services to all your local clients.
</p><p>
You do not need to install KDE to use this package.
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork3-news 3.5.5 29 i586
=Sum: News-related KDE application
+Des:
<!-- DT:Rich -->
<p>Knewsticker is a news ticker panel applet. For a standalone Usenet news reader, install kdepim3.
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork3-query 3.5.5 29 i586
=Sum: Clients for Internet Databases
+Des:
<!-- DT:Rich -->
<p>KDict is a client for the Dict database. The Dict databases are dictionaries which can be queried for free over the Internet.
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork3-vnc 3.5.5 29 i586
=Sum: Exporting of VNC and Connecting of VNC/RDP Sessions
+Des:
<!-- DT:Rich -->
<p>This package contains tools for VNC/RDP usage:
</p><p>
KRfb - to allow remote access to your current desktop.
krdc - a VNC/RDP client, it can discover remote VNC sessions via SLP or
connect to manually specified rdp:// sessions.
</p><p>
KRfb allows to connect to kdm-VNC sessions or to provided desktops via KRfb.
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork3-wireless 3.5.5 29 i586
=Sum: Wireless Card Manager
+Des:
<!-- DT:Rich -->
<p>The package contains KWiFiManager, a tool to configure wireless cards.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim3 3.5.5 36 i586
=Sum: Personal Information Manager Software for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains Kontact and the stand-alone applications for personal information management.
<ul>
<li>Kontact--personal information manager
</li><li>KMail--mail client
</li><li>KOrganizer--calendar and scheduling program
</li><li>KNode--news reader
</li><li>Kleopatra and KWatchGnuPG--certification manager
</li><li>Various wizards to connect to groupware servers
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdepim3-devel 3.5.5 36 i586
=Sum: Personal Information Manager software for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains tools for address and date organization.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim3-kpilot 3.5.5 36 i586
=Sum: This Package allows Communication with the 3COM Palm Pilot
+Des:
<!-- DT:Rich -->
<p>With this software your Linux box can communicate with your 3COM
Palm Pilot via the Palm Cradle.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim3-mobile 3.5.5 36 i586
=Sum: Cell Phone Support
+Des:
<!-- DT:Rich -->
<p>This package contains files to support cell phones:
<ul>
<li>Kandy - synchronization application for cell phones
</li><li>KAddressbook plug-in to import and export addresses via gnokii (Nokia cell phones)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdepim3-networkstatus 3.5.5 36 i586
=Sum: Network Status Libraries and KDED Module
+Des:
<!-- DT:Rich -->
<p>The library and kded module to switch KDE desktop functions offline or to trigger dialins.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim3-notes 3.5.5 36 i586
=Sum: Note taking application
+Des:
<!-- DT:Rich -->
<p>This package contains the notes application KNotes.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim3-time-management 3.5.5 36 i586
=Sum: Personal Information Manager
+Des:
<!-- DT:Rich -->
<p>This package contains tools for address and date organisation.
</p>
-Des:
##----------------------------------------
=Pkg: kdesdk3 3.5.5 28 i586
=Sum: The KDE Software Development Kit
+Des:
<!-- DT:Rich -->
<p>This is a collection of applications and tools used by KDE developers.
Important applications are:
<ul>
<li>cervisia: for browsing CVS repositories
</li><li>kompare: visualizing changes between two versions of a file
</li><li>umbrello: UML modeller
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdesdk3-devel 3.5.5 28 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: kdesdk3-kdecvs 3.5.5 28 i586
=Sum: KBugBuster
+Des:
<!-- DT:Rich -->
<p>KBugBuster can be used by people with a KDE CVS account to handle bug reports.
</p>
-Des:
##----------------------------------------
=Pkg: kdesdk3-profile 3.5.5 28 i586
=Sum: Profiling Tools
+Des:
<!-- DT:Rich -->
<p>This package contains KCachegrind and the needed Calltree skin for Valgrind.
You can profile your application with Valgrind using Calltree skin and display
the result in KCachegrind to easily find bottlenecks.
</p>
-Des:
##----------------------------------------
=Pkg: kdesdk3-translate 3.5.5 28 i586
=Sum: Tools to Handle Translations
+Des:
<!-- DT:Rich -->
<p>KBabel: for easy handling of PO files. PO files are used to store translations for glibc-based applications.
</p><p>
poxml: translate DocBook files using translated PO files.
</p>
-Des:
##----------------------------------------
=Pkg: kdesvn 0.11.0 14 i586
=Sum: KDE Subversion Client
+Des:
<!-- DT:Rich -->
<p>kdesvn is a GUI client for subversion repositories.
</p>
-Des:
##----------------------------------------
=Pkg: kdetoys3 3.5.5 27 i586
=Sum: Nice Toys for KDE
+Des:
<!-- DT:Rich -->
<p>This package currently contains three programs:
<ul>
<li>kmoon, the show-me-the-current-moon-phase-in-the-panel program
</li><li>kworldclock, the show-me-where-on-the-world-is-day program
</li><li>kodo, the show-me-how-far-I-have-moved-my-mouse-today program
</li><li>kweather, the show-me-how-the-weather-is-today program
</li><li>amor, the show-me-a-little-window-dancer program
</li><li>kteatime, the shoe-me-when-the-tea-is-good program
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdetv 0.8.9 10 i586
=Sum: A Program for Watching TV in KDE
+Des:
<!-- DT:Rich -->
<p>KWinTV allows you to watch TV in a window on your PC screen. It has
more or less the same abilities as Xtvscreen, which is included in the
BTTV-driver package. It is based on Qt, a C++ GUI application
framework by Troll Tech.
</p>
-Des:
##----------------------------------------
=Pkg: kdeutils3 3.5.5 34 i586
=Sum: KDE Utility Programs
+Des:
<!-- DT:Rich -->
<p>A couple of utility programs for KDE.
<ul>
<li>ark - archiver tool
</li><li>kcalc - calculator tool
</li><li>kdepasswd - tool that changes the user login password
</li><li>kdf - tool that shows free space on disk
</li><li>kfloppy - floppy formatter
</li><li>kgpg - gpg key manager
</li><li>kwalletmanager - manager for showing and modifying passwords of kwallet
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdeutils3-devel 3.5.5 34 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: kdeutils3-extra 3.5.5 34 i586
=Sum: KDE Utility Programs
+Des:
<!-- DT:Rich -->
<p>Small applications not used by most people.
</p><p>
kcharselect - browse characters
</p><p>
kedit - the old KDE text editor
</p><p>
khexedit - hex editor
</p><p>
kjots - an application for notes
</p><p>
ktimer - a timing application
</p><p>
superkaramba - a tool that allows one to easily use interactive eye-candy
</p>
-Des:
##----------------------------------------
=Pkg: kdeutils3-laptop 3.5.5 34 i586
=Sum: KDE utility programs for laptop users
+Des:
<!-- DT:Rich -->
<p>Support for various types of hardware input devices that exist, such as those on keyboards. It contains:
<ul>
<li>kmilo - tool that enables special keys on some keyboards
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdevelop3 3.3.5 30 i586
=Sum: Integrated Development Environment for the X Window System, Qt, KDE, and GNOME
+Des:
<!-- DT:Rich -->
<p>An integrated development environment (IDE) that allows you to write
programs for the X Window System, the Qt library, or KDE. It includes a documentation
browser, a source code editor with syntax highlighting, a GUI for
the compiler, and much more.
</p>
-Des:
##----------------------------------------
=Pkg: kdewebdev3 3.5.5 29 i586
=Sum: KDE Web Development Suite
+Des:
<!-- DT:Rich -->
<p>The package contains various tools for the daily work of a Web administrator:
<ul>
<li>Quanta--an HTML editor (native source and WYSIWIG) with lots of features,
like a PHP debugger
</li><li>KLinkStatus--validator for links on HTML pages
</li><li>KImageMapEditor--an HTML image map editor
</li><li>KXsldbg--XSLT debugger
</li><li>KFileReplace--batch search and replace tool
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdiff3 0.9.91 11 i586
=Sum: Feature-Rich Code Comparison Utility
+Des:
<!-- DT:Rich -->
<p>KDiff3 is a program that:
<ul>
<li>Compares or merges two or three text input files or directories
</li><li>Shows the differences line-by-line and character-by-character
</li><li>Provides an automatic merge facility and an integrated editor for comfortably solving merge conflicts
</li><li>Supports KIO on KDE (allows accessing ftp, sftp, fish, smb, etc.)
</li><li>Has an intuitive graphical user interface
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdirstat 2.4.4 49 i586
=Sum: Graphical Directory Statistics for Used Disk Space
+Des:
<!-- DT:Rich -->
<p>KDirStat (KDE Directory Statistics) is a utility program that sums up
disk usage for directory trees--very much like the Unix 'du' command.
It can also help you clean up used space.
</p>
-Des:
##----------------------------------------
=Pkg: kdissert 1.0.6c 10 i586
=Sum: Mindmapping Tool
+Des:
<!-- DT:Rich -->
<p>KDissert is a mindmapping tool dedicated to the creation of complex documents: dissertations, thesis, presentations, and reports. It features several document generators: latex reports, latex slides (based on Prosper and Beamer), OpenOffice.org writer and impress, html, and plain text.
</p>
-Des:
##----------------------------------------
=Pkg: kdrill 6.4 40 i586
=Sum: "Kanji Drill"--Kanji Quiz and Japanese Dictionary for the X Window System
+Des:
<!-- DT:Rich -->
<p>KDrill stands for Kanji Drill. It is a program to help people learn
kanji and kana (the Japanese charater set). It uses Jim Breen's EDICT
Japanese-English dictionary and also doubles as a dictionary lookup
program. Kdrill runs under the X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-bigsmp 2.6.18.2 34 i586
=Sum: Kernel with PAE Support
+Ins:
<!-- DT:Rich -->
<p>Install this kernel only if you know exactly what you are doing. YaST installs the correct kernel for your system automatically.
</p>
-Ins:
+Del:
<!-- DT:Rich -->
<p>The kernel is required to boot your Linux system. You can
update it, but install a new one and make it bootable before
shutting Linux down or it will not boot again without a reinstall
of the kernel.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>This kernel supports up to 64GB of main memory. It requires Physical Addressing Extensions (PAE), which were introduced with the Pentium Pro processor.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-default 2.6.18.2 34 i586
=Sum: The Standard Kernel for both Uniprocessor and Multiprocessor Systems
+Ins:
<!-- DT:Rich -->
<p>Install this kernel only if you know exactly what you are doing. YaST installs the correct kernel for your system automatically.
</p>
-Ins:
+Del:
<!-- DT:Rich -->
<p>The kernel is required to boot your Linux system. You can
update it, but install a new one and make it bootable before
shutting Linux down or it will not boot again without a reinstall
of the kernel.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>The standard kernel for both uniprocessor and multiprocessor systems.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-source 2.6.18.2 34 i586
=Sum: The Linux Kernel Sources
+Des:
<!-- DT:Rich -->
<p>Linux kernel sources with many fixes and improvements.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-syms 2.6.18.2 34 i586
=Sum: Kernel Symbol Versions (modversions)
+Des:
<!-- DT:Rich -->
<p>Kernel symbols, such as functions and variables, have version information
attached to them. This package contains the symbol versions for the standard
kernels.
</p><p>
Installing this package before compiling kernel modules outside of the
kernel source tree adds symbol version information to these modules.
Modules without symbol version information can only be loaded on
the exact kernel version for which they were compiled. Modules with symbol
version information can be loaded into more recent kernels as long
as none of the symbols exported by the kernel have changed. This provides a
reasonable level of confidence but does not guarantee that the module
will work.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-xen 2.6.18.2 34 i586
=Sum: The Xen Kernel
+Des:
<!-- DT:Rich -->
<p>The Linux kernel for Xen paravirtualization.
</p><p>
This kernel can be used both as the domain0 ("xen0") and as an unprivileged ("xenU") kernel.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-xenpae 2.6.18.2 34 i586
=Sum: The Xen Kernel with PAE support
+Des:
<!-- DT:Rich -->
<p>The Linux kernel for Xen paravirtualization with Physical Addressing Extensions (PAE).
</p><p>
PAE is a mechanism to access more than 4 GiB of memory on 32-bit Intel processors. This kernel can be used both as the domain0 ("xen0") and as an unprivileged ("xenU") kernel.
</p>
-Des:
##----------------------------------------
=Pkg: kerry 0.2.1 8 i586
=Sum: Desktop search tool
+Des:
<!-- DT:Rich -->
<p>A desktop search tool integrated with Beagle and KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kiax 0.8.4 43 i586
=Sum: Voive-over-IP client for Asterisk (IAX protocol)
+Des:
<!-- DT:Rich -->
<p>VoIP has become a hot topic and already is a part of our life. Different standards and platforms are already in development and use: H.323 and SIP are only some of the most famous used VoIP protocols. A marvellous piece of software called Asterisk PBX (http://www.asterisk.org), developed by Mark Spenser from Digium Inc. (http://www.digium.com) proved again that the Open Source CAN PRODUCE QUALITATIVE SOFTWARE for the business and can save money with its full set of features of an advanced PBX.
In the process of the development of Asterisk a new protocol has gathered the attention among the VoIP users - the Inter-Asterisk eXchange, or IAX (TM), Protocol, used as a the native communication protocol between Asterisk PBX Servers. What is particularly good in it is that it requires only one UDP port per endpoint to create a successful communication channel for VoIP calls. This makes it much friendlier for users behind NAT, which is not the case with SIP and H.323 - they required specific router configurations for their channel establishment, thus hindering faster spread of VoIP on the home and corporate desktop.
The IAX (TM) protocol is already adopted by major VoIP providers and Telcos. If you register in Free World Dialup (http://www.fwdnet.net), IAXTel (http://www.iaxtel.com) or Freshtel (http://www.freshtel.net) or any other VoIP termination service like VoIPUser.org (http://www.voipuser.org) or PSTN Termination Provider like VoIP Jet (http://www.voipjet.com) then you may be interested in using Kiax.
What is Kiax? - Kiax is an IAX client application (a so called Softphone) which allows PC users to make ordinary VoIP calls to Asterisk servers, the same way as they do it with their hardware telephone. It aims to provide a simple and user-friendly graphical interface and desktop integration for calling, contact list, call register management and easy configuration. That is - a simple to use IAX Client.
</p>
-Des:
##----------------------------------------
=Pkg: kile 1.9.2 31 i586
=Sum: A LaTeX Source Editor and TeX Shell
+Des:
<!-- DT:Rich -->
<p>KTexMaker2 has many menu points for LaTeX commands, an editor,
and can start a LaTeX and DVI viewer.
</p>
-Des:
##----------------------------------------
=Pkg: kino 0.8.0 39 i586
=Sum: Kino is a Nonlinear DV Editor for GNU/Linux
+Des:
<!-- DT:Rich -->
<p>Kino is a nonlinear DV editor for GNU/Linux. It features excellent
integration with IEEE 1394 for capture, VTR control, and recording back to
the camera. It captures video to disk in AVI format in both type-1
DV and type-2 DV (separate audio stream) encodings.
</p>
-Des:
##----------------------------------------
=Pkg: kinput2 v3.1 363 i586
=Sum: Kanji Input Server for the X Window System
+Des:
<!-- DT:Rich -->
<p>Kinput2 is an input server for X Window System applications
that require Japanese text input.
</p>
-Des:
##----------------------------------------
=Pkg: kinternet 0.75 51 i586
=Sum: SUSE Internet Connect Tool
+Des:
<!-- DT:Rich -->
<p>This small KDE application can manage an Internet connection.
</p>
-Des:
##----------------------------------------
=Pkg: kio-locate 0.4.5 29 i586
=Sum: KDE I/O Slave for the locate Command
+Des:
<!-- DT:Rich -->
<p>You can use kio-locate mostly as you use locate. Instead of typing "locate pattern" at a command prompt, you start the search directly in Konqueror or any KDE application that accepts URLs. Just enter "locate:pattern" as the address. If the pattern is mixed-case or uppercase the search is case-sensitive.
</p>
-Des:
##----------------------------------------
=Pkg: kio_beagle 0.3.1 34 i586
=Sum: KIO Slave for Beagle
+Des:
<!-- DT:Rich -->
<p>A KIO slave for Beagle that allows a user to use Beagle in Konqueror, the open_file dialog box, or the Alt-F2 command line. This is an initial version and supports basic querying.
</p>
-Des:
##----------------------------------------
=Pkg: kio_ipodslave 0.8.pre1 31 i586
=Sum: iPod Browsing with Konqueror
+Des:
<!-- DT:Rich -->
<p>With kio_ipodslave, browse your iPod.
Use "ipod:/" to see the contents of your iPod.
</p>
-Des:
##----------------------------------------
=Pkg: kio_iso 1.70.1 28 i586
=Sum: KIO slave to access ISO images
+Des:
<!-- DT:Rich -->
<p>KIO slave to access ISO images
</p>
-Des:
##----------------------------------------
=Pkg: kio_slp 0.4.1 43 i586
=Sum: SLP Browsing with Konqueror
+Des:
<!-- DT:Rich -->
<p>With kio_slp, browse your SLP (Service Location Protocol) network, redirect to the real services, or view the service attributes.
</p><p>
Enter "service:/" in Konqueror to browse your network.
</p><p>
Use "slp:/" to browse only SLP announcements and view the attributes.
</p><p>
Use "mdns:/" to browse only multicast DNS announcements and view the attributes.
</p>
-Des:
##----------------------------------------
=Pkg: kiosktool 1.0 44 i586
=Sum: Kiosk Admin Tool
+Des:
<!-- DT:Rich -->
<p>A tool for a system administrator to create profiles for the KDE desktop.
</p>
-Des:
##----------------------------------------
=Pkg: kipi-plugins 0.1.2 26 i586
=Sum: KDE Plug-Ins for Image Manipulation
+Des:
<!-- DT:Rich -->
<p>A set of plug-ins for the KDE KIPI interface, used by some KDE imaging applications.
</p>
-Des:
##----------------------------------------
=Pkg: kisdnwatch 01.00.10 43 i586
=Sum: A Monitor for CAPI 2.0-Based ISDN Devices
+Des:
<!-- DT:Rich -->
<p>KISDNWatch is a CAPI monitor for the K Desktop Environment.
This tool resides in the KDE toolbar and
shows ISDN channel status. On an incoming
or outgoing call, KISDNWatch opens a window with more
detailed information. This only works with AVM's ISDN controllers at the moment.
</p>
-Des:
##----------------------------------------
=Pkg: kismet 2006_04_R1 27 i586
=Sum: An 802.11 Wireless Network Sniffer
+Des:
<!-- DT:Rich -->
<p>Kismet is an 802.11 wireless network sniffer. This is different from a normal network sniffer (such as Ethereal or tcpdump) because it separates and identifies different wireless networks in the area. Kismet works with any 802.11b wireless card that is capable of reporting raw packets (rfmon support), which include any Prism2-based cards (Linksys, D-Link, Rangelan, and more), Cisco Aironet cards, and Orinoco-based cards. Kismet also supports the WSP100 802.11b remote sensor by Network Chemistry and is able to monitor 802.11a networks with cards that use the ar5k chipset.
</p>
-Des:
##----------------------------------------
=Pkg: kitchensync 0.01svn602778 17 i586
=Sum: KDE Synchronization application based on OpenSync.
+Des:
<!-- DT:Rich -->
<p>KitchenSync is a Synchronization application based on OpenSync. With KitchenSync you are able to synchronize cell phones, organizer, palms and other Personal Information Manager with KDE PIM (KAddressbook, KOrganizer, KNotes).
</p>
-Des:
##----------------------------------------
=Pkg: klipsi 0.16 20 i586
=Sum: A Psion Remote Clipboard utility for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains a KDE utility for using the Psion's remote clipboard
function.
</p>
-Des:
##----------------------------------------
=Pkg: klogd 1.4.1 584 i586
=Sum: The kernel log daemon
+Des:
<!-- DT:Rich -->
<p>The klogd daemon 'listens' to kernel log messages, prioritizes them,
and routes them to either output files or to syslog daemon.
</p><p>
This version of klogd will optionally translate kernel addresses to
their symbolic equivalents if provided with a system map.
</p>
-Des:
##----------------------------------------
=Pkg: kmobiletools 0.4.3.3 36 i586
=Sum: Mobile Phone Management
+Des:
<!-- DT:Rich -->
<p>A tool for using your mobile phone:
A tool for using your mobile phone:<ul>
<li>Trigger calls with numbers in kaddressbook
</li><li>Create and browse SMS
</li><li>Monitor status
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kmymoney 0.8.5 28 i586
=Sum: A Personal Finance Manager
+Des:
<!-- DT:Rich -->
<p>KMyMoney is a personal finance manager. It does not support online banking, but it can import and export QIF (Quicken) files.
</p>
-Des:
##----------------------------------------
=Pkg: knights 0.6 455 i586
=Sum: A Nice, Themeable Chess Front-End
+Des:
<!-- DT:Rich -->
<p>Knights is a themeable chess front-end. You can play against the crafty engine or
via an Internet server.
</p>
-Des:
##----------------------------------------
=Pkg: knoda 0.8.2 24 i586
=Sum: A Database Front-End
+Des:
<!-- DT:Rich -->
<p>Knoda is a database front-end for MySQL and PostgreSQL, which also contains
a generic ODBC driver. You can use it for creating tables and databases, forms,
reports, and queries. Knoda has also an export and import filter for CSV files.
</p><p>
The package also contains a general library with dialogs for the handling of databases, which can be used in other applications.
</p>
-Des:
##----------------------------------------
=Pkg: knx 0.1 61 i586
=Sum: NX Client
+Des:
<!-- DT:Rich -->
<p>A client for NX servers. It can talk to the commercial and closed source servers and the free NX authentication server.
</p><p>
NX is very useful, especially on slow connections, for getting fast remote access via a GUI login.
</p>
-Des:
##----------------------------------------
=Pkg: koffice 1.6.0 30 i586
=Sum: Libraries and Base Files for the KDE Office Suite
+Des:
<!-- DT:Rich -->
<p>Base files and libraries for koffice applications. The applications are
in these packages:
</p><p>
koffice-wordprocessing
koffice-spreadsheet
koffice-illustration
koffice-presentation
koffice-database
koffice-planning
koffice-extra
</p>
-Des:
##----------------------------------------
=Pkg: koffice-database 1.6.0 30 i586
=Sum: Database Application Based on KOffice Libraries (kexi)
+Des:
<!-- DT:Rich -->
<p>This package contains the KOffice database application Kexi.
</p>
-Des:
##----------------------------------------
=Pkg: koffice-extra 1.6.0 30 i586
=Sum: Small Add-On Applications for KOffice
+Des:
<!-- DT:Rich -->
<p>This package contains small add-on applications for KOffice:
</p><p>
Kugar--A report viewer that shows reports from XML files.
</p>
-Des:
##----------------------------------------
=Pkg: koffice-illustration 1.6.0 30 i586
=Sum: Illustration and Image Manipulation Applications Based on KOffice Libraries (krita, karbon, kivio)
+Des:
<!-- DT:Rich -->
<p>This package contains the KOffice illustration applications:
<ul>
<li>krita--Image manipulation application
</li><li>karbon--A vector drawing application
</li><li>kivio--A flow chart drawing application
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: koffice-presentation 1.6.0 30 i586
=Sum: A KOffice Program to Create Presentations
+Des:
<!-- DT:Rich -->
<p>Kpresenter can create and show presentation slides.
</p>
-Des:
##----------------------------------------
=Pkg: koffice-spreadsheet 1.6.0 30 i586
=Sum: A Spreadsheet for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains:
</p><p>
kspread--a classic spreadsheet application, which can show diagrams via kchart
kchart--to create diagrams
</p>
-Des:
##----------------------------------------
=Pkg: koffice-wordprocessing 1.6.0 30 i586
=Sum: A KDE Word Processor
+Des:
<!-- DT:Rich -->
<p>Needed applications for word processing:
</p><p>
kword--a classic word processor
kthesaurus--a tool for replacing a word with a synonym
kformula--a tool for creating math symbols and formulas
</p>
-Des:
##----------------------------------------
=Pkg: kommander 3.5.5 29 i586
=Sum: Editor to build dialogs and application
+Des:
<!-- DT:Rich -->
<p>Kommander is a creator of full main window applications without the need to
use any programming language.
</p>
-Des:
##----------------------------------------
=Pkg: kommander-runtime 3.5.5 29 i586
=Sum: Runtime to execute Kommander based applications
+Des:
<!-- DT:Rich -->
<p>Runtime parts to execute Kommander based applications and dialogs.
</p>
-Des:
##----------------------------------------
=Pkg: konserve 0.10.3 47 i586
=Sum: A Small Backup Tool
+Des:
<!-- DT:Rich -->
<p>A small backup tool, which is usable as a Kicker applet.
</p>
-Des:
##----------------------------------------
=Pkg: konversation 1.0.1 23 i586
=Sum: A User-Friendly IRC Client for KDE 3
+Des:
<!-- DT:Rich -->
<p>Konversation is a user-friendly IRC client for KDE 3.x.
</p>
-Des:
##----------------------------------------
=Pkg: kover 2.9.6 51 i586
=Sum: A CD Case Cover Editor
+Des:
<!-- DT:Rich -->
<p>Kover is an easy to use WYSIWYG CD cover printer. You can type in the
title and contents, select fonts and images, and print it. The program
prints the cover including the cut and fold lines. It supports CDDB for
automatic completion of title and artist information.
</p>
-Des:
##----------------------------------------
=Pkg: kpl 3.3 45 i586
=Sum: A Program for Graphically Presenting Data Sets and Functions
+Des:
<!-- DT:Rich -->
<p>Kpl is a program for presenting two-dimensional graphical data sets and functions.
</p><p>
All settings necessary for a complete description of the presentation
can be saved in plot files. These files as well as data files may be
chosen via command line parameters, using the File menu, or by drag and
drop.
</p><p>
Automatic scaling and normalization allow the easy graphical
presentation of data.
</p><p>
Presentation settings may be changed using the Edit
menu. Additional data sets and functions can be included,
which can be displayed in the same and different data
windows.
</p>
-Des:
##----------------------------------------
=Pkg: kpowersave 0.7.1 6 i586
=Sum: KDE Front-End to powersave Package, Battery Monitor, and General Power Management Support
+Des:
<!-- DT:Rich -->
<p>The package provides battery monitoring and suspend and standby triggers.
It is based on the powersave package and therefore supports APM and ACPI.
Together with the powersave package and the YaST power management module, it is the preferred package that should be used for battery monitoring and control of power management related tasks.
See the powersave package for additional features, such as CPU frequency scaling (SpeedStep and PowerNow).
</p>
-Des:
##----------------------------------------
=Pkg: kpsion 0.16 20 i586
=Sum: A Psion Utility for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains a KDE utility program for backing up, restoring, and formatting
Psion drives.
</p>
-Des:
##----------------------------------------
=Pkg: kradio 1.0beta3b_20060920 13 i586
=Sum: Comfortable V4L and V4L2 Radio Application for KDE
+Des:
<!-- DT:Rich -->
<p>KRadio is a comfortable radio application for KDE with support for
V4L and V4L2 radio card drivers.
</p><p>
KRadio currently provides:
<ul>
<li>V4L and V4L2 radio support
</li><li>Remote control support (LIRC)
</li><li>Alarms and sleep countdown
</li><li>Several GUI controls (Docking Menu, Station Quickbar, Radio Display)
This package also includes a growing collection of station preset
files for many cities around the world contributed by KRadio users.
</p>
-Des:
##----------------------------------------
=Pkg: krb5 1.5.1 23 i586
=Sum: MIT Kerberos5 Implementation--Libraries
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network's security by eliminating the insecure
practice of clear text passwords.
</p>
-Des:
##----------------------------------------
=Pkg: krb5-apps-clients 1.5.1 23 i586
=Sum: MIT Kerberos5 client applications
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network's security by eliminating the insecure
practice of cleartext passwords.
This package includes some kerberos compatible client applications like ftp, rpc, rlogin, telnet, ...
</p>
-Des:
##----------------------------------------
=Pkg: krb5-apps-servers 1.5.1 23 i586
=Sum: MIT Kerberos5 server applications
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network's security by eliminating the insecure
practice of cleartext passwords.
This package includes some kerberos compatible server applications like ftpd, klogind, telnetd, ...
</p>
-Des:
##----------------------------------------
=Pkg: krb5-client 1.5.1 23 i586
=Sum: MIT Kerberos5 implementation - client programms
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network's security by eliminating the insecure
practice of cleartext passwords.
This package includes some required client programs, like kinit, kadmin, ...
</p>
-Des:
##----------------------------------------
=Pkg: krb5-devel 1.5.1 23 i586
=Sum: MIT Kerberos5 - Include Files and Libraries
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network's security by eliminating the insecure
practice of cleartext passwords.
This package includes Libraries and Include Files for Development
</p>
-Des:
##----------------------------------------
=Pkg: krb5-server 1.5.1 23 i586
=Sum: MIT Kerberos5 implementation - server
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network's security by eliminating the insecure
practice of cleartext passwords.
This package includes the kdc, kadmind and more.
</p>
-Des:
##----------------------------------------
=Pkg: krecord 1.16 56 i586
=Sum: A Sound Recorder
+Des:
<!-- DT:Rich -->
<p>This program records sound from your sound card and saves it to WAV files.
</p>
-Des:
##----------------------------------------
=Pkg: krename 3.0.12 30 i586
=Sum: A Batch Rename Application
+Des:
<!-- DT:Rich -->
<p>Krename is a very powerful batch file renamer for KDE3.
Features include:
-renaming a list of files based on a set of expressions
-copying and moving a list of files to another directory
-converting filenames to uppercase or lowercase
-adding numbers to filenames
-finding and replacing parts of the filename
-renaming MP3 or Ogg Vorbis files based on their ID3 tags
-setting access and modification dates
-managing permissions and file ownership
-extending krename's features with a plug-in API
-renaming directories recursively
-supporting KFilePlugins
-creating an undo file
</p>
-Des:
##----------------------------------------
=Pkg: krpmbuilder 1.2 46 i586
=Sum: Build an RPM from a tar Archive
+Des:
<!-- DT:Rich -->
<p>With this program, easily create an RPM for your software project. Read
the application help for more information.
</p>
-Des:
##----------------------------------------
=Pkg: krusader 1.70.1 28 i586
=Sum: A File Manager
+Des:
<!-- DT:Rich -->
<p>A file manager.
</p>
-Des:
##----------------------------------------
=Pkg: kscpm 0.5.3 46 i586
=Sum: KDE Support for SCPM
+Des:
<!-- DT:Rich -->
<p>This package adds KDE support for the profile manager SCPM. It contains a kicker applet for choosing a destination profile. By default, it uses SUMF to perform the profile switch, but it can be configured to execute an arbitrary command.
</p>
-Des:
##----------------------------------------
=Pkg: kseg 0.4 239 i586
=Sum: A Simulator of Euclidean Geometry
+Des:
<!-- DT:Rich -->
<p>KSEG is a program for exploring Euclidean geometry. You can create a
construction, such as a triangle with a circumcenter, then,
as you drag verteces of the triangle, you can see the circumcenter
moving in real time. KSEG is very fast even in big and recursive
constructions and may well be used in math lessons in school.
</p>
-Des:
##----------------------------------------
=Pkg: ksgmltool 1.0.9 587 i586
=Sum: SGML-Tools--a Text Formatting Package for the Korean Language
+Des:
<!-- DT:Rich -->
<p>SGML-Tools is a text-formatting package based on SGML (Standard Generalized
Markup Language), which allows you to produce LaTeX, HTML, GNU info, LyX, RTF,
and plain ASCII (via groff) from a single source.
This system is tailored for writing technical software documentation,
examples of which are the Linux HOWTO documents. It should be useful for all
kinds of printed and online documentation.
</p><p>
This package is considered to be the successor of the Linuxdoc package.
SGML-Tools is not able to process arbitrary SGML documents. In such a
case, give jade_dsl a try and write your own DSSSL scripts (take the
docbk30 package as an example).
</p>
-Des:
##----------------------------------------
=Pkg: ksh 93r 41 i586
=Sum: Korn Shell
+Des:
<!-- DT:Rich -->
<p>The original Korn Shell. The ksh is an sh-compatible command interpreter
that executes commands read from standard input or from a file.
</p>
-Des:
##----------------------------------------
=Pkg: ksimus 0.3.6.2 47 i586
=Sum: Simulation, Automation, and Visualization of Electrical Circuits
+Des:
<!-- DT:Rich -->
<p>KSimus is a tool for the simulation, automation, and visualization of technical processes (currently limited to idealized logic circuits). It is also useful for education and experiments in the scope of logical and automatic control circuits.
</p>
-Des:
##----------------------------------------
=Pkg: kst 1.3.1 19 i586
=Sum: Real-Time Data Viewing and Plotting Tool with Basic Data Analysis Functionality
+Des:
<!-- DT:Rich -->
<p>Kst is a data plotting and viewing program. Some of the features include:
Kst is a data plotting and viewing program. Some of the features include:<ul>
<li>Robust plotting of live "streaming" data
</li><li>Powerful keyboard and mouse plot manipulation
</li><li>Powerful plug-in and extension support
</li><li>Large selection of built-in plotting and data manipulation functions, such as histograms, equations, and power spectra
</li><li>Color mapping and contour mapping capabilities for three-dimensional data
</li><li>Monitoring of events and notification support
</li><li>Built-in filtering and curve fitting capabilities
</li><li>Convenient command line interface
</li><li>Powerful graphical user interface
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: ksudoku 0.3 52 i586
=Sum: Generate and Solve Sudoku Puzzles in 2D or 3D
+Des:
<!-- DT:Rich -->
<p>KSudoku is a program that can generate and solve sudoku puzzles. The word Sudoku means "single number in an alloted place" in Japanese. Some cells are filled with a number at the beginnning: the remaining are to be filled by the player using numbers from 1 to 9, without repeating a number twice on each column, row, or subsquare.
</p>
-Des:
##----------------------------------------
=Pkg: ksymoops 2.4.11 35 i586
=Sum: Kernel Oops and Error Message Decoder
+Des:
<!-- DT:Rich -->
<p>The Linux kernel produces error messages that contain machine specific
numbers that are meaningless for debugging. Ksymoops reads
machine-specific files and the error log and converts the addresses
to meaningful symbols and offsets.
</p>
-Des:
##----------------------------------------
=Pkg: ksystemlog 0.3.2 47 i586
=Sum: System Log Viewer Tool
+Des:
<!-- DT:Rich -->
<p>This program is developed for use by beginner users, who do not know how to find information about their Linux system and how the log files are in their computer. But it is also designed for advanced users, who want to quickly see problems occurring on their server.
</p>
-Des:
##----------------------------------------
=Pkg: kterm 6.2.0 843 i586
=Sum: Kanji Terminal
+Des:
<!-- DT:Rich -->
<p>Kterm is a multilingual terminal emulator based on
xterm. The major ways kterm differs from xterm are
that it can handle multilingual text encoded in ISO2022,
can display colored text, and has the status line function.
To input multilingual text, both the X Input Method (XIM)
protocol and kinput2 protocol can be used.
</p>
-Des:
##----------------------------------------
=Pkg: ktoblzcheck 1.11 20 i586
=Sum: Library to check account numbers and bank codes of German banks documents
+Des:
<!-- DT:Rich -->
<p>KtoBLZCheck is a library to check account numbers and bank codes of
German banks. Both a library for other programs as well as a short
command-line tool is available. It is possible to check pairs of
account numbers and bank codes (BLZ) of German banks, and to map bank
codes (BLZ) to the clear-text name and location of the bank.
</p>
-Des:
##----------------------------------------
=Pkg: ktoblzcheck-devel 1.11 20 i586
=Sum: Library to check account numbers and bank codes of German banks documents
+Des:
<!-- DT:Rich -->
<p>KtoBLZCheck is a library to check account numbers and bank codes of
German banks. Both a library for other programs as well as a short
command-line tool is available. It is possible to check pairs of
account numbers and bank codes (BLZ) of German banks, and to map bank
codes (BLZ) to the clear-text name and location of the bank.
</p>
-Des:
##----------------------------------------
=Pkg: ktorrent 2.0.3 27 i586
=Sum: KDE BitTorrent Client
+Des:
<!-- DT:Rich -->
<p>Torrent is a BitTorrent program for KDE. Its main features are:
Torrent is a BitTorrent program for KDE. Its main features are:<ul>
<li>Download of torrent files
</li><li>Upload speed capping, seeing that most people cannot upload infinite amounts of data
</li><li>Internet searching using the BitTorrent Web site's search engine
</li><li>UDP trackers
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: ktray 0.1 46 i586
=Sum: Independent System Tray Applet
+Des:
<!-- DT:Rich -->
<p>KTray is a system tray that holds dock icons of any application. It is independent from the KDE Kicker so it can be used with any window manager. It is based on the code from the original kicker system tray panel applet.
</p>
-Des:
##----------------------------------------
=Pkg: kvirc 3.2.5 24 i586
=Sum: Graphical Front-End for IRC
+Des:
<!-- DT:Rich -->
<p>IRC (Internet Relay Chat) client with an MDI interface; scripting, pop-up, alias, and event editor; DCC (SEND CHAT VOICE and RESUME); SOCKSV4 & V5 support; and more. See documentation in
/opt/kde/share/doc/HTML/de/kvirc/index.html.
</p>
-Des:
##----------------------------------------
=Pkg: kvocabs 0.3.4 37 i586
=Sum: Vocabulary Trainer
+Des:
<!-- DT:Rich -->
<p>KVocabs is a plain Qt application for learning vocabulary. Add a
personal vocabulary in different archives. After adding the vocabularies,
it is possible to learn them in a random order. Individual statistics
are provided for each quiz session. The stored vocabularies are
removable and editable.
</p>
-Des:
##----------------------------------------
=Pkg: kvpnc 0.8.6.1 24 i586
=Sum: GUI Front-End for openswan and vpnc
+Des:
<!-- DT:Rich -->
<p>The application can create configurations for various kinds of VPN connections. You should also install the vpnc or openswan package.
</p>
-Des:
##----------------------------------------
=Pkg: kwatch 2.3.3 45 i586
=Sum: A KDE Log File Viewer
+Des:
<!-- DT:Rich -->
<p>This program shows log files in the same way as 'tail -f'. Changes to
the file are shown immediately.
</p>
-Des:
##----------------------------------------
=Pkg: kwin-decor-suse2 0.4 15 i586
=Sum: The window decoration of SUSE - improved
+Des:
<!-- DT:Rich -->
<p>This is the improved version of the standard SUSE KDE window decoration.
</p>
-Des:
##----------------------------------------
=Pkg: kxmleditor 1.1.4 52 i586
=Sum: A Tool for Browsing and Editing XML Documents
+Des:
<!-- DT:Rich -->
<p>KXML Editor is a tool for browsing and editing XML documents. It contains a split view, with the XML document structure in one panel and a list of element attributes and their values in the other panel.
</p>
-Des:
##----------------------------------------
=Pkg: kyum 0.7.5 46 i586
=Sum: Graphical User Front-End (GUI) for yum
+Des:
<!-- DT:Rich -->
<p>KYum is a graphical user front-end (GUI) for yum. You can use it to modify your repository files and to control the most common operations of yum.
</p>
-Des:
##----------------------------------------
=Pkg: lacheck 1.26 34 i586
=Sum: Syntax Checker for LaTeX Documents
+Des:
<!-- DT:Rich -->
<p>Lacheck is a syntax checker for LaTeX documents. It is no longer
part of the newer AuC-TeX packages. Therefore this package is available
on its own. You can use lacheck as a stand-alone program, too.
</p>
-Des:
##----------------------------------------
=Pkg: ladspa 1.12.code10 42 i586
=Sum: The Linux Audio Developer's Simple Plug-In API
+Des:
<!-- DT:Rich -->
<p>The Linux Audio Developer's Simple Plug-in API (LADSPA) provides
the ability to write simple plug-in audio processors in C/C++ and link
them dynamically. The package contains the LADSPA SDK, the CMT plug-in
libraries (including Freeverb), and the swh plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: lash 0.5.0 35 i586
=Sum: Linux Audio Session Handler
+Des:
<!-- DT:Rich -->
<p>LASH (formerly LADCCA) is a session management system for JACK and ALSA
audio applications on GNU/Linux. Its aim is to allow you to have many
different audio programs running at once and to save the setup, close
them down, then reload the setup at some other time.
</p>
-Des:
##----------------------------------------
=Pkg: lash-devel 0.5.0 35 i586
=Sum: Development package for LASH
+Des:
<!-- DT:Rich -->
<p>This package contains the files needed to compile programs
that use the LASH system.
</p>
-Des:
##----------------------------------------
=Pkg: lash-libs 0.5.0 35 i586
=Sum: Shared libraries for LASH system
+Des:
<!-- DT:Rich -->
<p>This package contains the shared libraries for LASH system.
</p>
-Des:
##----------------------------------------
=Pkg: lbreakout 2.5.2 42 i586
=Sum: Classic Breakout-Style Game
+Des:
<!-- DT:Rich -->
<p>A Breakout-style arcade game for Linux featuring a number of added graphical enhancements and effects. You control a paddle at the bottom of the playing field and must destroy bricks at the top by bouncing balls against them.
</p>
-Des:
##----------------------------------------
=Pkg: ldapcpplib 0.0.4 38 i586
=Sum: C++ API for LDAPv3
+Des:
<!-- DT:Rich -->
<p>C++ API for LDAPv3.
</p><p>
</p><p>
Documentation is in /usr/share/doc/packages/ldapcpplib/srcdoc.
</p>
-Des:
##----------------------------------------
=Pkg: less 394 32 i586
=Sum: Text File Browser and Pager Similar to more
+Del:
<!-- DT:Rich -->
<p>This package is not required, although it is strongly recommended.
</p><p>
Remove this package only if you know what
you are doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>less is a text file browser and pager similar to more.
It allows backward as well as forward movement within a file.
Also, less does not have to read the entire input file before
starting. It is possible to start an editor at any time from
within less.
</p>
-Des:
##----------------------------------------
=Pkg: lftp 3.5.6 13 i586
=Sum: LFTP Command Line File Transfer Program
+Des:
<!-- DT:Rich -->
<p>LFTP is a reliable shell-like command line FTP client. It can retry
operations and does reget automatically. It can do several transfers
simultaneously in the background. With LFTP, you can start a transfer in the background and continue
browsing that FTP site or another one. This is all done in one process.
Background jobs are completed in nohup mode if you exit or close the modem
connection. LFTP has reput, mirror, and reverse mirror among its features. Since
version 2.0, it also supports the HTTP protocol. Other features include IPV6 support,
context sensitive completion, output redirection to files or to pipe, FTP and
HTTP proxy support, transfer rate throttling for each connection and for all
connections in sum, job queueing, job execution at specified times, opie and skey
support in the FTP protocol, SSL for HTTP and FTP, and FXP transfers.
</p>
-Des:
##----------------------------------------
=Pkg: lha 1.14i 604 i586
=Sum: Pack Program
+Des:
<!-- DT:Rich -->
<p>Lha is a packer comparable to ZIP (PKZIP), ZOO, and others. It has been included for
compatibility reasons only. Use GZIP for general archiving purposes, because
it is the standard for Linux.
</p>
-Des:
##----------------------------------------
=Pkg: libEMF 1.0 213 i586
=Sum: Library for Manipulation with Enhanced MetaFile (EMF, ECMA-234)
+Des:
<!-- DT:Rich -->
<p>LibEMF is a C/C++ library that provides a drawing toolkit based on
ECMA-234. The general purpose of this library is to create vector
graphics files on POSIX systems that can be imported into
StarOffice or OpenOffice. The Enhanced MetaFile (EMF) is one of the two
color vector graphics format that is "vectorially" understood by
SO and OO. The EMF format also has the additional advantage that it can be
"broken" into its constituent components and edited like any other
SO or OO graphics object.
</p>
-Des:
##----------------------------------------
=Pkg: libEMF-devel 1.0 213 i586
=Sum: Library for manipulation with Enhanced MetaFile (EMF, ECMA-234)
+Des:
<!-- DT:Rich -->
<p>LibEMF is a C/C++ library which provides a drawing toolkit based on
ECMA-234. The general purpose of this library is to create vector
graphics files on POSIX systems which can be imported into
StarOffice/OpenOffice. The Enhanced MetaFile (EMF) is one of the two
color vector graphics format which is "vectorially" understood by
SO/OO. The EMF format also has the additional advantage that it can be
"broken" into its constituent components and edited like any other
SO/OO graphics object.
</p>
-Des:
##----------------------------------------
=Pkg: libPropList 0.10.1 667 i586
=Sum: The PropList Library Needed by WindowMaker and Related Projects
+Des:
<!-- DT:Rich -->
<p>The PropList (PL) library is supposed to closely mimic the
behavior of the property lists used in GNUstep/OPENSTEP.
It provides functionality to manipulate files, write to
and read from files, and synchronize with the contents
of a file for a tree structure of strings, data blocks,
arrays, and dictionaries (key-value pair lists).
PropList is used by WindowMaker and related projects.
Includes are in the libPropListd package.
</p>
-Des:
##----------------------------------------
=Pkg: libXiterm 0.5.20040304 66 i586
=Sum: terminal emulator Xaw widget library based on libiterm
+Des:
<!-- DT:Rich -->
<p>terminal emulator Xaw widget library based on libiterm
</p>
-Des:
##----------------------------------------
=Pkg: libXiterm-devel 0.5.20040304 66 i586
=Sum: Header files and development libraries for libXiterm
+Des:
<!-- DT:Rich -->
<p>Header files and development libraries for libXiterm
</p>
-Des:
##----------------------------------------
=Pkg: libaal 1.0.5 30 i586
=Sum: A Library Providing Application Abstraction Mechanisms Used by Reiser4progs
+Des:
<!-- DT:Rich -->
<p>libaal includes device abstraction, libc independence code, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libacl 2.2.34 33 i586
=Sum: A dynamic library for accessing POSIX Access Control Lists
+Des:
<!-- DT:Rich -->
<p>This package contains the libacl.so dynamic library which contains
the POSIX 1003.1e draft standard 17 functions for manipulating access
control lists.
</p>
-Des:
##----------------------------------------
=Pkg: libacl-devel 2.2.34 33 i586
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libadns 1.3 18 i586
=Sum: Advanced DNS resolver client library
+Des:
<!-- DT:Rich -->
<p>Libadns is an advanced, easy to use, asynchronous-capable DNS resolver client library for C (and C++) programs.
<p>The Linux-native asynchronous I/O facility ("async I/O", or "aio") has a
richer API and capability set than the simple POSIX async I/O facility.
This library provides the Linux-native API for async I/O.
The POSIX async I/O facility requires this library to provide
kernel-accelerated async I/O capabilities, as do applications that
require the Linux-native async I/O API.
</p>
-Des:
##----------------------------------------
=Pkg: libaio-devel 0.3.104 32 i586
=Sum: Development Files for Linux-native Asynchronous I/O Access
+Des:
<!-- DT:Rich -->
<p>This package provides header files to include, and libraries to link with,
for the Linux-native asynchronous I/O facility ("async I/O", or "aio").
</p>
-Des:
##----------------------------------------
=Pkg: libakode 2.0.1 29 i586
=Sum: A Simple Audio Back-End
+Des:
<!-- DT:Rich -->
<p>aKode is a simple audio back-end suitable for simple actions.
</p>
-Des:
##----------------------------------------
=Pkg: libakode-devel 2.0.1 29 i586
=Sum: a simple audio backend
+Des:
<!-- DT:Rich -->
<p>aKode is a simple audio backend suitable for simple actions.
</p>
-Des:
##----------------------------------------
=Pkg: libao 0.8.6 41 i586
=Sum: A Cross-Platform Audio Output Library
+Des:
<!-- DT:Rich -->
<p>Libao is a cross-platform audio output library. It currently supports
ESD, OSS, Solaris, and IRIX.
</p>
-Des:
##----------------------------------------
=Pkg: libao-devel 0.8.6 41 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libapparmor 2.0 35 i586
=Sum: Immunix Library to provide key AppArmor symbols
+Des:
<!-- DT:Rich -->
<p>This package provides the libimmunix library, which contains the change_hat(2)
symbol, used for sub-process confinement by AppArmor. Applications that
wish to make use of change_hat(2) need to link against this library.
</p>
-Des:
##----------------------------------------
=Pkg: libapr-util1 1.2.7 26 i586
=Sum: Apache Portable Runtime (APR) Library
+Des:
<!-- DT:Rich -->
<p>A companion library to APR, the Apache Portable Runtime.
</p>
-Des:
##----------------------------------------
=Pkg: libapr1 1.2.7 23 i586
=Sum: Apache Portable Runtime (APR) Library
+Des:
<!-- DT:Rich -->
<p>The mission of the Apache Portable Runtime (APR) project is to create and maintain software libraries that provide a predictable and consistent interface to underlying platform-specific implementations. The primary goal is to provide an API to which software developers may code and be assured of predictable if not identical behaviour regardless of the platform on which their software is built, relieving them of the need to code special-case conditions to work around or take advantage of platform-specific deficiencies or features.
</p><p>
The APR is used by both Open Source and Commercial projects, prominent examples being the Apache HTTP server.
</p>
-Des:
##----------------------------------------
=Pkg: libart_lgpl 2.3.17 35 i586
=Sum: Libart Components Licensed under the LGPL
+Des:
<!-- DT:Rich -->
<p>Libart is a library for high-performance 2D graphics. It is currently being used as the antialiased rendering engine for GNOME Canvas. It is also the rendering engine for Gill, the GNOME Illustration application.
</p>
-Des:
##----------------------------------------
=Pkg: libart_lgpl-devel 2.3.17 35 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libattr 2.4.28 38 i586
=Sum: A dynamic library for filesystem extended attribute support
+Des:
<!-- DT:Rich -->
<p>This package contains the libattr.so dynamic library.It contains
the extended attribute system calls and library functions.
</p>
-Des:
##----------------------------------------
=Pkg: libattr-devel 2.4.28 38 i586
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries and header files needed to
develop programs which make use of extended attributes.
For Linux programs, the documented system call API is the
recommended interface, but an SGI IRIX compatibility interface
is also provided.
</p>
-Des:
##----------------------------------------
=Pkg: libavc1394 0.5.3 20 i586
=Sum: Libavc1394--Programming Interface to the AV/C Specification
+Des:
<!-- DT:Rich -->
<p>Libavc1394 is a programming interface to the AV/C specification from
the 1394 Trade Association. AV/C stands for Audio/Video Control. Currently,
applications use the library to control the tape transport mechanism on DV
camcorders. However, there are many devices and device functions that
can be controlled via AV/C. Eventually, the library will be expanded to
implement more of the specification and to provide a high level interface
to various devices.
</p>
-Des:
##----------------------------------------
=Pkg: libavc1394-devel 0.5.3 20 i586
=Sum: libavc1394 is a programming interface to the AV/C specification
+Des:
<!-- DT:Rich -->
<p>libavc1394 is a programming interface to the AV/C specification from
the 1394 Trade Association. AV/C stands for Audio/Video Control. Currently,
applications use the library to control the tape transport mechanism on DV
camcorders. However, there are many devices and functions of devices that
can be controlled via AV/C. Eventually, the library will be expanded to
implement more of the specification and to provide high level interfaces
to various devices.
</p>
-Des:
##----------------------------------------
=Pkg: libbeagle 0.2.12 22 i586
=Sum: Beagle C interface
+Des:
<!-- DT:Rich -->
<p>Library to talk to the beagle server in C.
</p>
-Des:
##----------------------------------------
=Pkg: libbeagle-devel 0.2.12 22 i586
=Sum: Beagle C interface
+Des:
<!-- DT:Rich -->
<p>Library to talk to the beagle server in C.
</p>
-Des:
##----------------------------------------
=Pkg: libbonobo 2.16.0 19 i586
=Sum: The Bonobo Component System for the GNOME 2.x Desktop Platform
+Des:
<!-- DT:Rich -->
<p>Bonobo is a component system for the GNOME platform. Libbonobo is the new version for the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: libbonobo-devel 2.16.0 19 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libbonobo-doc 2.16.0 19 i586
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>Bonobo is a component system for the GNOME platform. Libbonobo is the new version for the GNOME 2.x platform.
</p>
-Des:
##----------------------------------------
=Pkg: libbonoboui 2.16.0 28 i586
=Sum: The Bonobo Part of the GNOME User Interface Libraries
+Des:
<!-- DT:Rich -->
<p>This library contains the Bonobo-related part of the GNOME UI libraries. It belongs to the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: libbonoboui-devel 2.16.0 28 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libbonoboui-doc 2.16.0 28 i586
=Sum: The Bonobo Part of the GNOME User Interface Libraries
+Des:
<!-- DT:Rich -->
<p>This library contains the Bonobo related part of the GNOME UI-libraries. It belongs to the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: libbtctl 0.8.0 26 i586
=Sum: GObject Bluetooth Controller Library
+Des:
<!-- DT:Rich -->
<p>This library is intended to provide convenient GObject-style access to
common platform Bluetooth functions.
</p><p>
The idea of this library is to stand alone and not require GNOME.
</p><p>
It provides .NET bindings (in a separate package) and Python bindings.
</p>
-Des:
##----------------------------------------
=Pkg: libcap 1.92 519 i586
=Sum: Library and Binaries for Capabilities (linux-privs) Support
+Des:
<!-- DT:Rich -->
<p>Capabilities are a measure to limit the omnipotence of the superuser.
Currently a program started by root or setuid root has the power to
do anything.
Capabilities (Linux-Privs) provide a more fine-grained access control.
Without kernel patches, you can use this library to drop capabilities within
setuid binaries.
If you use patches, this can be done automatically by the kernel.
</p>
-Des:
##----------------------------------------
=Pkg: libcddb 1.3.0 11 i586
=Sum: CDDB Access Library
+Des:
<!-- DT:Rich -->
<p>Libcddb is a library that implements the different protocols (CDDBP,
HTTP, SMTP) to access data on a CDDB server (http://freedb.org). It
tries to be as cross-platform as possible.
</p>
-Des:
##----------------------------------------
=Pkg: libcddb-devel 1.3.0 11 i586
=Sum: CDDB Access Library
+Des:
<!-- DT:Rich -->
<p>Libcddb is a library that implements the different protocols (CDDBP,
HTTP, SMTP) to access data on a CDDB server (http://freedb.org). It
tries to be as cross-platform as possible.
</p>
-Des:
##----------------------------------------
=Pkg: libcdio 0.77 15 i586
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and
control. Applications wanting to be oblivious to the OS and
device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libcdio-devel 0.77 15 i586
=Sum: CD-ROM access library
+Des:
<!-- DT:Rich -->
<p>This library is to encapsulate CD-ROM reading and
control. Applications wishing to be oblivious of the OS- and
device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libchewing 0.3.0 22 i586
=Sum: Intelligent Phonetic Input Method Library for Traditional Chinese
+Des:
<!-- DT:Rich -->
<p>Intelligent phonetic input method library for traditional Chinese.
</p>
-Des:
##----------------------------------------
=Pkg: libchipcard 2.1.9 20 i586
=Sum: A Library That Allows Easy Access to Smart Cards (Chipcards)
+Des:
<!-- DT:Rich -->
<p>Libchipcard allows easy access to smart cards. It provides basic access
to memory and processor cards and has special support for German medical
cards, German "Geldkarten," and HBCI (home banking) cards (both type 0 and
type 1).
It accesses the readers via CTAPI or PC/SC interfaces and has successfully
been tested with Towitoko, Kobil, and Reiner-SCT readers.
</p>
-Des:
##----------------------------------------
=Pkg: libchipcard-devel 2.1.9 20 i586
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libcom_err 1.39 21 i586
=Sum: com_err library
+Des:
<!-- DT:Rich -->
<p>com_err is an error message display library.
</p>
-Des:
##----------------------------------------
=Pkg: libcroco 0.6.1 16 i586
=Sum: CSS2 Parser Library
+Des:
<!-- DT:Rich -->
<p>Libcroco is a stand-alone CSS2 parsing library. It provides a low-level event-driven SAC-like API and a CSS object model-like API.
</p>
-Des:
##----------------------------------------
=Pkg: libcroco-devel 0.6.1 16 i586
=Sum: CSS2 Parser Library Development Files
+Des:
<!-- DT:Rich -->
<p>Libcroco is a stand-alone CSS2 parsing library. It provides a low-level event-driven SAC-like API and a CSS object model like API.
</p>
-Des:
##----------------------------------------
=Pkg: libdaemon 0.10 37 i586
=Sum: Lightweight C library That Eases the Writing of UNIX Daemons
+Des:
<!-- DT:Rich -->
<p>libdaemon is a lightweight C library that eases the writing of UNIX daemons. It consists of the following parts:
<ul>
<li>A wrapper around fork() that does the correct daemonization procedure of a process
</li><li>A wrapper around syslog() for simpler log output compatible with syslog or STDERR
</li><li>An API for writing PID files
</li><li>An API for serializing UNIX signals into a pipe for usage with select() or poll()
</li><li>An API for running subprocesses with STDOUT and STDERR redirected to syslog
</li></ul>
APIs like these are used in most daemon software available. It is not that simple to get it done right and code duplication is not a goal.
</p>
-Des:
##----------------------------------------
=Pkg: libdar 2.2.5 25 i586
=Sum: Backup and Restore Application
+Des:
<!-- DT:Rich -->
<p>Dar stands for Disk ARchive and is a hardware independent backup solution. Dar uses catalogs (unlike tar), so it is possible to extract a single file without having to read the whole archive, and it is also possible to create incremental backups.
</p><p>
Dar archives can also be created, or used, via the libdar library (for example with KDar, a KDE application).
</p><p>
This package contains the library used by Dar and KDar.
</p>
-Des:
##----------------------------------------
=Pkg: libdc1394 2.0.0 21 i586
=Sum: 1394-Based Digital Camera Control Library
+Des:
<!-- DT:Rich -->
<p>This library provides functionality for controlling any camera that conforms to the
1394-Based Digital Camera Specification (which can be found at
http://www.1394ta.org/Download/Technology/Specifications/Camera120.pdf). It
utilizes the low-level functionality provided by libraw1394 to communicate with
the camera.
</p>
-Des:
##----------------------------------------
=Pkg: libdnet 1.11 20 i586
=Sum: Library for simple, portable interface to low level networking routines
+Des:
<!-- DT:Rich -->
<p>libdnet provides a simplified, portable interface to several low-level networking routines, including:
<ul>
<li>network address manipulation
</li><li>kernel arp(4) cache and route(4) table lookup and manipulation
</li><li>raw IP packet and Ethernet frame transmission
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libdrm 2.0.2 23 i586
=Sum: Userspace Interface for Kernel DRM Services
+Des:
<!-- DT:Rich -->
<p>The package containts the userspace interface to the kernel DRM services.
</p>
-Des:
##----------------------------------------
=Pkg: libdrm-devel 2.0.2 23 i586
=Sum: Libraries, includes and more to develop libdrm applications
+Des:
<!-- DT:Rich -->
<p>The package containts the userspace interface to the kernel DRM services.
</p>
-Des:
##----------------------------------------
=Pkg: libdv 0.104 47 i586
=Sum: The Quasar DV Codec
+Des:
<!-- DT:Rich -->
<p>The Quasar DV codec (libdv) is a software codec for DV video, the encoding format used by most digital camcorders, typically those that support the IEEE 1394 (FireWire or i.Link) interface. Libdv was developed according to the official standards for DV video: IEC 61834 and SMPTE 314M.
</p><p>
There are two sample applications included with libdv: playdv and encode.
</p>
-Des:
##----------------------------------------
=Pkg: libdv-devel 0.104 47 i586
=Sum: The Quasar DV codec
+Des:
<!-- DT:Rich -->
<p>The Quasar DV codec (libdv) is a software codec for DV video, the encoding format used by most digital camcorders, typically those that support the IEEE 1394 (a.k.a. FireWire or i.Link) interface. Libdv was developed according to the official standards for DV video: IEC 61834 and SMPTE 314M.
</p><p>
There are two sample applications included with libdv: playdv and encode.
</p>
-Des:
##----------------------------------------
=Pkg: libdvdnav 0.1.10 34 i586
=Sum: A DVD Navigation Library
+Des:
<!-- DT:Rich -->
<p>This library contains functions to display DVD video menus.
</p>
-Des:
##----------------------------------------
=Pkg: libdvdread 0.9.6 21 i586
=Sum: A Library for Reading DVD Video Images
+Des:
<!-- DT:Rich -->
<p>This package contains shared libraries for accessing DVD images
(this package does not contain DeCSS algorithms).
</p>
-Des:
##----------------------------------------
=Pkg: libedit 2.9.snap20061022 8 i586
=Sum: A command line editing and history library
+Des:
<!-- DT:Rich -->
<p>libedit is a command line editing and history library. It is designed to be
used by interactive programs that allow the user to type commands at a terminal
prompt.
</p>
-Des:
##----------------------------------------
=Pkg: libelf 0.8.9 19 i586
=Sum: An ELF Object File Access Library
+Des:
<!-- DT:Rich -->
<p>The libelf package contains a library for accessing ELF object files.
Libelf allows you to access the internals of the ELF object file format,
so you can see the different sections of an ELF file.
</p>
-Des:
##----------------------------------------
=Pkg: libevent 1.1 31 i586
=Sum: Library Providing an Event Handling API
+Des:
<!-- DT:Rich -->
<p>The libevent library provides a mechanism to execute a function when a
specific event on a file descriptor occurs or after a given time has passed.
</p>
-Des:
##----------------------------------------
=Pkg: libexif 0.6.14 18 i586
=Sum: An EXIF Tag Parsing Library for Digital Cameras
+Des:
<!-- DT:Rich -->
<p>This library is used to parse EXIF information from JPEGs created by
digital cameras.
</p>
-Des:
##----------------------------------------
=Pkg: libexif-gtk 0.3.3 344 i586
=Sum: GTK Widgets for Viewing EXIF Information
+Des:
<!-- DT:Rich -->
<p>This library contains GTK widgets for viewing EXIF information within
JPEG images created by some digital cameras.
</p>
-Des:
##----------------------------------------
=Pkg: libffi41 4.1.2_20061115 7 i586
=Sum: Foreign Function Interface library
+Des:
<!-- DT:Rich -->
<p>A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.
</p>
-Des:
##----------------------------------------
=Pkg: libflaim 4.9.1001 4 i586
=Sum: Embeddable cross-platform database engine
+Des:
<!-- DT:Rich -->
<p>FLAIM is an embeddable cross-platform database engine that provides a rich, powerful, easy-to-use feature set. It is the database engine used by Novell eDirectory. It has proven to be highly scalable, reliable, and robust. It is available on a wide variety of 32 bit and 64 bit platforms.
</p>
-Des:
##----------------------------------------
=Pkg: libgail-gnome 1.1.3 31 i586
=Sum: GNOME Accessibility Implementation Library for gnomeui and libbonoboui
+Des:
<!-- DT:Rich -->
<p>This package contains an implementation of the ATK interfaces for GNOME widgets.
</p>
-Des:
##----------------------------------------
=Pkg: libgail-gnome-devel 1.1.3 31 i586
=Sum: GNOME Accessibility Implementation Library for gnomeui and libbonoboui
+Des:
<!-- DT:Rich -->
<p>This package contains an implementation of the ATK interfaces for GNOME widgets.
</p>
-Des:
##----------------------------------------
=Pkg: libgcc41 4.1.2_20061115 5 i586
=Sum: C compiler runtime library
+Des:
<!-- DT:Rich -->
<p>Libgcc is needed for dynamically linked C programs.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj-devel 4.1.3 29 i586
=Sum: The system GNU Java development files.
+Des:
<!-- DT:Rich -->
<p>The system GNU Java development files.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj41 4.1.2_20061115 7 i586
=Sum: Java Runtime Library for gcc
+Des:
<!-- DT:Rich -->
<p>This library is needed if you want to use the GNU Java compiler, gcj.
Source code for this package is in gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj41-devel 4.1.2_20061115 7 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgcrypt 1.2.3 18 i586
=Sum: The GNU Crypto Library
+Des:
<!-- DT:Rich -->
<p>Libgcrypt is a general purpose crypto library based on the code used in
GnuPG (alpha version).
</p>
-Des:
##----------------------------------------
=Pkg: libgcrypt-devel 1.2.3 18 i586
=Sum: The GNU Crypto Library
+Des:
<!-- DT:Rich -->
<p>Libgcrypt is a general purpose crypto library based on the code used in
GnuPG (alpha version).
</p><p>
This package contains needed files to compile and link against the library.
</p>
-Des:
##----------------------------------------
=Pkg: libgda 1.3.91 58 i586
=Sum: GNU Data Access (GDA) Library
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) is an attempt to provide uniform access to
different kinds of data sources (databases, information servers, mail spools, and more).
It is a complete architecture that provides all you need to access
your data. It is defined by a set of CORBA interfaces that are as generic as possible
(but very powerful at the same time) so that any kind of data source
can be accessed through them.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-devel 1.3.91 58 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgdiplus 1.1.18 10 i586
=Sum: Open Source Implementation of the GDI+ API
+Des:
<!-- DT:Rich -->
<p>This is part of the Mono project. It is required when using Windows.Forms.
</p>
-Des:
##----------------------------------------
=Pkg: libghttp 1.0.9 683 i586
=Sum: A GNOME Library for HTTP Access
+Des:
<!-- DT:Rich -->
<p>The gHTTP library is fully compliant with HTTP 1.1 as defined in
the draft 5 update of RFC 2068.
</p><p>
</p><p>
The gHTTP library is designed to be simple and easy to use while still
allowing you to get your feet wet in the protocol layer if you have to.
It is designed with graphical, nonthreaded applications in mind
(such as GNOME applications). You should be able to use the library in
your application and never block data that is waiting to be sent to or received from a
remote server. The main thread of execution should always be available
to refresh its display.
</p>
-Des:
##----------------------------------------
=Pkg: libgimpprint 4.2.7 101 i586
=Sum: Gimp-Print libraries
+Des:
<!-- DT:Rich -->
<p>Libraries to print with The GIMP
</p>
-Des:
##----------------------------------------
=Pkg: libglade2 2.6.0 23 i586
=Sum: Glade Library Compatible with the GNOME 2.x Desktop Platform
+Des:
<!-- DT:Rich -->
<p>This library allows you to load Glade interface files in a program at runtime.
It does not require that you use Glade, but Glade is the easiest way to
create the interface files. For an idea of how to use the library, see the
documentation, especially /usr/share/doc/packages/libglade/test-libgladee.c and
the glade-xml.h include, which is in the libglade package.
</p>
-Des:
##----------------------------------------
=Pkg: libglade2-devel 2.6.0 23 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libglade2-doc 2.6.0 23 i586
=Sum: Glade Library Compatible with the GNOME 2.x Platform
+Des:
<!-- DT:Rich -->
<p>This library allows you to load glade interface files into a program at runtime.
It does not require GLADE to be used, but GLADE is by far the easiest way to
create the interface files. For an idea of how to use the library, see the
documentation, especially /usr/share/doc/packages/libglade/test-libgladee.c and
glade-xml.h include, that is in the libgladed package.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome 2.16.0 26 i586
=Sum: The GNOME 2.x Desktop Base Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the basic libraries for the GNOME 2.x Desktop platform.
GNOME has no specific window manager. You are totally
free in your choice. Many GNOME users like Sawfish, Enlightenment, or
IceWM as a window manager for GNOME (see those packages).
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-devel 2.16.0 26 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-doc 2.16.0 26 i586
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>This package contains the basic libraries for the GNOME 2.x platform.
GNOME itself contains no specific window manager thus you are totally
free in your choice of one. Many GNOME users like Sawfish, Enlightenment, or
IceWM as window manager for GNOME (see those packages).
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecanvas 2.14.0 23 i586
=Sum: An Add-On for the GNOME User Interface Libraries
+Des:
<!-- DT:Rich -->
<p>Libgnomecanvas is a graphical add-on for the GNOME User Interface libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecanvas-devel 2.14.0 23 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecanvas-doc 2.14.0 23 i586
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>This package contains optional documentation provided in addition to this package's base documentation.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecups 0.2.2 46 i586
=Sum: GNOME CUPS Library
+Des:
<!-- DT:Rich -->
<p>A gobject (GLib) wrapper for IPP printer management, which is used by CUPS. Mainly used by the GNOME printing system.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecups-devel 0.2.2 46 i586
=Sum: GNOME CUPS Library
+Des:
<!-- DT:Rich -->
<p>A gobject (GLib) wrapper for IPP printer management, which is used by CUPS. Mainly used by the GNOME printing system.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomedb 1.3.91 53 i586
=Sum: Library for Writing GNOME Database Programs
+Des:
<!-- DT:Rich -->
<p>Libgnomedb is a library that eases the task of writing
GNOME database programs.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomedb-devel 1.3.91 53 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprint 2.12.1 47 i586
=Sum: The GNOME 2.x Printing Library
+Des:
<!-- DT:Rich -->
<p>This package contains the GNOME 2.x printing library, which provides a simple and clean API for GNOME programs that have to print documents.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprint-devel 2.12.1 47 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprint-doc 2.12.1 47 i586
=Sum: The GNOME 2.x Printing Library
+Des:
<!-- DT:Rich -->
<p>This package contains the GNOME 2.x printing library, which provide a simple and clean API for GNOME programs that have to print documents.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprintui 2.12.1 47 i586
=Sum: User Interface Part of the GNOME Printing Library
+Des:
<!-- DT:Rich -->
<p>This library contains all user-interface related functions to the GNOME printing subsystem.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprintui-devel 2.12.1 47 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprintui-doc 2.12.1 47 i586
=Sum: User Interface Part of the GNOME-Printing Library
+Des:
<!-- DT:Rich -->
<p>This library contains all user-interface related functions to the GNOME printing subsystem.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomesu 1.0.0 66 i586
=Sum: GNOME su Library
+Des:
<!-- DT:Rich -->
<p></p><p>
Libgnomesu is a library for providing superuser privileges to GNOME
applications. It supports sudo, consolehelper, PAM, and su.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomesu-devel 1.0.0 66 i586
=Sum: Development files for libgnomesu
+Des:
<!-- DT:Rich -->
<p>This package contains all files needed to develop with libgnomesu.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeui 2.16.1 20 i586
=Sum: The GNOME User Interface Library
+Des:
<!-- DT:Rich -->
<p>This library contains all the user interface-related functions for GNOME-based software. You need the libgnomeui-devel package if you want to develop GNOME 2.x Desktop software.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeui-devel 2.16.1 20 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeui-doc 2.16.1 20 i586
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>This library contains all the User-Interface related functions for GNOME-based Software. You need the libgnomeui-devel package too if you want to develop GNOME 2.x Desktop-based Software.
</p>
-Des:
##----------------------------------------
=Pkg: libgpg-error 1.4 15 i586
=Sum: Library That Defines Common Error Values for All GnuPG Components
+Des:
<!-- DT:Rich -->
<p>This is a library that defines common error values for all GnuPG
components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
pinentry, SmartCard Daemon, and possibly more in the future.
</p>
-Des:
##----------------------------------------
=Pkg: libgpg-error-devel 1.4 15 i586
=Sum: Development package for libgpg-error
+Des:
<!-- DT:Rich -->
<p>Files needed for software development using libgpg-error.
</p>
-Des:
##----------------------------------------
=Pkg: libgphoto2 2.2.1.5.trunk 22 i586
=Sum: A Digital Camera Library
+Des:
<!-- DT:Rich -->
<p>gPhoto (GNU Photo) is a set of libraries for previewing, retrieving, and capturing images from a range of supported digital cameras to your local hard drive.
It does not support digital cameras based on the USB storage protocol.
Those can be mounted by Linux directly.
</p><p>
As of this time, gPhoto supports around 500 cameras, listed on:
rate, which is a frame rate of 50 Hz) into 260 bits. For compatibility
with typical UNIX applications, our implementation turns frames of 160
16-bit linear samples into 33-byte frames (1650 Bytes/s).
The quality of the algorithm is good enough for reliable speaker
recognition. Even music often survives transcoding in recognizable
form (given the bandwidth limitations of 8 kHz sampling rate).
</p><p>
The interfaces offered are a front-end modeled after compress(1) and
a library API. Compression and decompression run faster than real-time
on most SPARC stations. The implementation has been verified against the
ETSI standard test patterns.
</p>
-Des:
##----------------------------------------
=Pkg: libgssapi 0.10 22 i586
=Sum: Generic GSSAPI Library
+Des:
<!-- DT:Rich -->
<p>This library exports a gssapi interface, but does not implement any gssapi
mechanisms itself. Instead it calls gssapi routines in other libraries,
depending on the mechanism.
</p>
-Des:
##----------------------------------------
=Pkg: libgtkhtml 2.11.0 38 i586
=Sum: A Library for HTML Support in GTK2.0
+Des:
<!-- DT:Rich -->
<p>Libgtkhtml provides extensions for GTK to handle the HTML format. It is widely used by applications for the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: libgtkhtml-devel 2.11.0 38 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgtop 2.14.4 15 i586
=Sum: LibGTop Library
+Des:
<!-- DT:Rich -->
<p></p><p>
A library that fetches information about the running system, such as
CPU and memory usage and active processes.
</p><p>
On Linux systems, this information is taken directly from the /proc
file system. On other systems, a server is used to read
information from /dev/kmem.
</p>
-Des:
##----------------------------------------
=Pkg: libgtop-devel 2.14.4 15 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libical 0.24.RC4 78 i586
=Sum: An Implementation of Basic iCAL Protocols
+Des:
<!-- DT:Rich -->
<p>Libical is an open source implementation of the IETF's iCalendar calendaring and scheduling protocols (RFC 2445, 2446, and 2447). It parses iCal components and provides a C API for manipulating the component properties, parameters, and subcomponents.
</p>
-Des:
##----------------------------------------
=Pkg: libicu 3.4 34 i586
=Sum: International Components for Unicode (development files)
+Des:
<!-- DT:Rich -->
<p>ICU is a set of C and C++ libraries that provides robust and
full-featured Unicode support. This package contains the runtime
libraries for ICU. It does not contain any of the data files needed at
runtime and present in the `icu' and `icu-locales` packages.
</p>
-Des:
##----------------------------------------
=Pkg: libicu-devel 3.4 34 i586
=Sum: International Components for Unicode (development files)
+Des:
<!-- DT:Rich -->
<p>ICU is a C++ and C library that provides robust and full-featured Unicode
support. This package contains the development files for ICU.
</p>
-Des:
##----------------------------------------
=Pkg: libicu-doc 3.4 34 i586
=Sum: International Components for Unicode (html documentation)
+Des:
<!-- DT:Rich -->
<p>ICU is a C++ and C library that provides robust and full-featured Unicode
support. This package contains the html documentation.
</p>
-Des:
##----------------------------------------
=Pkg: libid3tag 0.15.1b 53 i586
=Sum: ID3 Tag Manipulation Library
+Des:
<!-- DT:Rich -->
<p>libid3tag is a library for reading and writing ID3 tags, both
ID3v1 and the various versions of ID3v2.
</p>
-Des:
##----------------------------------------
=Pkg: libidl 0.8.7 20 i586
=Sum: IDL Parsing Library
+Des:
<!-- DT:Rich -->
<p>LibIDL is a small library for creating parse trees of CORBA
v2.2-compliant Interface Definition Language (IDL) files. IDL is a
specification for defining interfaces that can be used between
different CORBA implementations.
</p>
-Des:
##----------------------------------------
=Pkg: libidl-devel 0.8.7 20 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>LibIDL is a small library for creating parse trees of CORBA v2.2
compliant Interface Definition Language (IDL) files, which is a
specification for defining interfaces which can be used between
different CORBA implementations.
</p>
-Des:
##----------------------------------------
=Pkg: libidn 0.6.8 11 i586
=Sum: Support for Internationalized Domain Names (IDN)
+Des:
<!-- DT:Rich -->
<p>GNU Libidn is an implementation of the Stringprep, Punycode, and IDNA specifications defined by the IETF Internationalized Domain Names (IDN) working group. It is used to prepare internationalized strings (such as domain name labels, usernames, and passwords) in order to increase the likelihood that string input and string comparison work in ways that make sense for typical users around the world. The library contains a generic Stringprep implementation that does Unicode 3.2 NFKC normalization, mapping and prohibition of characters, and bidirectional character handling. Profiles for iSCSI, Kerberos 5, Nameprep, SASL, and XMPP are included. Punycode and ASCII Compatible Encoding (ACE) via IDNA is supported.
</p>
-Des:
##----------------------------------------
=Pkg: libidn-devel 0.6.8 11 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>GNU Libidn is an implementation of the Stringprep, Punycode, and IDNA specifications defined by the IETF Internationalized Domain Names (IDN) working group. It is used to prepare internationalized strings (such as domain name labels, usernames, and passwords) in order to increase the likelihood that string input and string comparison work in ways that make sense for typical users around the world. The library contains a generic Stringprep implementation that does Unicode 3.2 NFKC normalization, mapping and prohibition of characters, and bidirectional character handling. Profiles for iSCSI, Kerberos 5, Nameprep, SASL, and XMPP are included. Punycode and ASCII Compatible Encoding (ACE) via IDNA is supported.
</p>
-Des:
##----------------------------------------
=Pkg: libiec61883 1.1.0 12 i586
=Sum: implementation of IEC 61883
+Des:
<!-- DT:Rich -->
<p>This library is an implementation of IEC 61883, part 1 (CIP, plug registers,
and CMP), part 2 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of
IIDC, nearly all FireWire multimedia devices use IEC 61883 protocols.
</p><p>
The libiec61883 library provides a higher level API for streaming DV,
MPEG-2 and audio over Linux IEEE 1394. This includes both reception and
transmission. It uses the new "rawiso" API of libraw1394, which transparently
provides mmap-ed DMA for efficient data transfer. It also represents
the third generation of I/O technology for Linux 1394 for these media types
thereby removing the complexities of additional kernel modules, /dev nodes,
and procfs. It also consolidates features for plug control registers and
connection management that previously existed in experimental form in an
unreleased version of libavc1394.
</p>
-Des:
##----------------------------------------
=Pkg: libieee1284 0.2.10 37 i586
=Sum: A Library for Interfacing IEEE 1284-Compatible Devices
+Des:
<!-- DT:Rich -->
<p>This library is intended to be used by applications that need to
communicate with (or at least identify) devices that are attached via
a parallel port.
</p><p>
For Linux, there are some wrinkles in communicating with devices on
parallel ports (see /usr/share/doc/packages/libieee1284/README).
The aim of this library is to take all the worry about these
wrinkles from the application. It figures out which method is
appropriate for the currently running kernel. For instance, if the
application wants to know the device ID of a device on a particular
port, it asks the library for the the device ID. The library
then figures out if it is available via /proc (in any of the possible
locations) and, if not, tries asking the device itself. If
/dev/parport0 is not available for use, it tries ioperm; if that
fails, it tries /dev/port. The application does not have to
care.
</p>
-Des:
##----------------------------------------
=Pkg: libiniparser 2.15 15 i586
=Sum: Library to parse ini files
+Des:
<!-- DT:Rich -->
<p>Libiniparser offers parsing of ini files from the C level.
</p>
-Des:
##----------------------------------------
=Pkg: libiniparser-devel 2.15 15 i586
=Sum: Libraries and Header Files to Develop Programs with libiniparser Support
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries and header files needed to develop
programs which make use of the libiniparser programming interface.
</p><p>
The libiniparser offers parsing of ini files from the C level. See a
complete documentation in HTML format, from the
/usr/share/doc/packages/libiniparser-devel directory open the file
html/index.html with any HTML-capable browser.
</p>
-Des:
##----------------------------------------
=Pkg: libipoddevice 0.5.1 21 i586
=Sum: GObject Library That Provides iPod Device Transparency through HAL
+Des:
<!-- DT:Rich -->
<p>libipoddevice is a GObject library that provides iPod device transparency
through HAL. It provides certain device metadata through GObject properties.
</p><p>
libipoddevice is useful for applications wishing to interface with an iPod with
out having to worry about lower level boring device details.
</p>
-Des:
##----------------------------------------
=Pkg: libiptcdata 0.2.1 30 i586
=Sum: IPTC Metadata Tag Manipulation Library
+Des:
<!-- DT:Rich -->
<p>libiptcdata is a library for parsing, editing, and saving IPTC data.
</p><p>
libiptcdata is a library for manipulating the International Press Telecommunications Council (IPTC) metadata stored within multimedia files such as images. This metadata can include captions and keywords, often used by popular photo management applications. The library provides routines for parsing, viewing, modifying, and saving this metadata. The libiptcdata package also includes a command line utility, iptc, for editing IPTC data in JPEG files.
</p><p>
The library implements the IPTC Information Interchange Model according to its specification.
</p>
-Des:
##----------------------------------------
=Pkg: libiterm 0.5.20040304 66 i586
=Sum: Internationalized Terminal Emulator Library
+Des:
<!-- DT:Rich -->
<p>This is a portable library for internationalized terminal emulator.
All you need to make terminal emulator is to implements Callback functions,
like a drawing string on specific column and row, or set fore/background
color and so on.
</p>
-Des:
##----------------------------------------
=Pkg: libiterm-devel 0.5.20040304 66 i586
=Sum: Header files and development libraries for libiterm
+Des:
<!-- DT:Rich -->
<p>Header files and development libraries for libiterm
</p>
-Des:
##----------------------------------------
=Pkg: libjasper 1.701.0 36 i586
=Sum: JPEG-2000 library
+Des:
<!-- DT:Rich -->
<p>This package contains libjasper, a library implementing the JPEG-2000
image compression standard Part 1.
</p>
-Des:
##----------------------------------------
=Pkg: libjpeg 6.2.0 771 i586
=Sum: JPEG libraries
+Des:
<!-- DT:Rich -->
<p>The libraries (static and dynamic) for the jpeg-graphics format.
The sources are contained in the jpeg source package.
</p>
-Des:
##----------------------------------------
=Pkg: libjpeg-devel 6.2.0 37 i586
=Sum: Development Tools for Programs which will use the Libjpeg Library
+Des:
<!-- DT:Rich -->
<p>The libjpeg-devel package includes the header files and static libraries
necessary for developing programs which will manipulate JPEG files using
the libjpeg library.
</p>
-Des:
##----------------------------------------
=Pkg: libkexif 0.2.4 29 i586
=Sum: EXIF Data Handling Library
+Des:
<!-- DT:Rich -->
<p>Libkexif is a library for manipulating EXIF information embedded in images.
It currently supports viewing of all EXIF information via libexif. It also
supports the modification of a few attributes in a way that preserves
all other EXIF information in the file.
</p>
-Des:
##----------------------------------------
=Pkg: libkipi 0.1.4 30 i586
=Sum: KDE Image Plug-In Interface
+Des:
<!-- DT:Rich -->
<p>This package provides a generic KDE image plug-in interface used by some KDE image applications. Plug-ins for this interface are in the kipi-plugins package.
</p>
-Des:
##----------------------------------------
=Pkg: libksba 1.0.0 17 i586
=Sum: A X.509 Library
+Des:
<!-- DT:Rich -->
<p>KSBA is a library to simplify the task of working with X.509
certificates, CMS data, and related data.
</p>
-Des:
##----------------------------------------
=Pkg: liblazy 0.1.1 3 i586
=Sum: Liblazy - D-Bus methods provided for convenience
+Des:
<!-- DT:Rich -->
<p>Liblazy is a simple and easy to use library that provides convenient functions for sending messages over the D-Bus daemon, querying information from HAL or asking PolicyKit for a privilege.
</p>
-Des:
##----------------------------------------
=Pkg: liblcms 1.15 30 i586
=Sum: Libraries for the Little CMS Engine
+Des:
<!-- DT:Rich -->
<p>This is a small engine for doing color management work.
</p>
-Des:
##----------------------------------------
=Pkg: liblcms-devel 1.15 30 i586
=Sum: Include Files and Libraries Mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: liblo 0.23 21 i586
=Sum: Lightweight OSC Implementation
+Des:
<!-- DT:Rich -->
<p>This is a lightweight, easy-to-use implementation of the OSC protocol
(see http://www.cnmat.berkeley.edu/OpenSoundControl/ for details).
</p>
-Des:
##----------------------------------------
=Pkg: liblrdf 0.4.0 41 i586
=Sum: A library to Manipulate RDF Files for LADSPA Plug-Ins
+Des:
<!-- DT:Rich -->
<p>This is a library to make it easy to manipulate RDF files describing
LADSPA plug-ins.
It can also be used for general RDF manipulation.
</p><p>
It can read RDF, XLM, and N3 files and export N3 files. Ot also has a
light taxonomic inference capability.
</p>
-Des:
##----------------------------------------
=Pkg: libltdl 1.5.22 34 i586
=Sum: Libtool Runtime Library
+Des:
<!-- DT:Rich -->
<p>Library needed by programs that use the ltdl interface of GNU libtool.
</p>
-Des:
##----------------------------------------
=Pkg: libmal 0.31 198 i586
=Sum: Palm Sync Library
+Des:
<!-- DT:Rich -->
<p>Libmal is a convenience library of the object files contained in
Tom Whittaker's malsync distribution. It also includes a few wrapper functions.
</p>
-Des:
##----------------------------------------
=Pkg: libmcal 0.7 154 i586
=Sum: Modular Calendar Access Library
+Des:
<!-- DT:Rich -->
<p>The MCAL library is very similar to the c-client IMAP library.
It offers a common, simple interface for accessing calendars
that can be stored in many different formats, both local
and remote formats are supported.
</p>
-Des:
##----------------------------------------
=Pkg: libmcrypt 2.5.7 154 i586
=Sum: Data Encryption Library
+Des:
<!-- DT:Rich -->
<p>Libmcrypt is a data encryption library. The library
is thread safe and provides encryption and decryption
functions. This version of the library supports many
encryption algorithms and encryption modes. Supported algorithms
<p>Libmikmod is a portable sound library, capable of playing samples
as well as module files. It was originally written by Jean-Paul Mikkers
(MikMak) for DOS. It supports OSS /dev/dsp, ALSA, and Esound and can
also write wav files. Supported file formats include mod, stm,
s3m, mtm, xm, and it.
</p>
-Des:
##----------------------------------------
=Pkg: libmng 1.0.9 37 i586
=Sum: Library for Support of MNG and JNG Formats
+Des:
<!-- DT:Rich -->
<p>This library can handle MNG and JNG formats that contain animated pictures.
These formats should replace the GIF format.
</p>
-Des:
##----------------------------------------
=Pkg: libmng-devel 1.0.9 37 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This library can handle MNG and JNG formats which contain animated pictures.
These formats should replace the GIF format.
</p><p>
This package contains the static library and the header files.
</p>
-Des:
##----------------------------------------
=Pkg: libmpcdec 1.2.2 20 i586
=Sum: Musepack Audio Decoder
+Des:
<!-- DT:Rich -->
<p>Musepack is an audio compression format with a strong emphasis on high quality. It is not lossless, but it is designed for transparency, so that you cannot hear differences between the original WAV file and the much smaller MPC file.
</p><p>
It is based on the MPEG-1 Layer-2 / MP2 algorithms, but since 1997 it has rapidly developed and vastly improved and is now at an advanced stage in which it contains heavily optimized and patentless code.
</p><p>
Musepack is not particularly optimized for low bit rates. The encoder was designed to be transparent at the --standard setting, thus little low bit rate tuning has gone into the codec, unlike that of AAC, Vorbis, WMA, and others that focus more on this region.
</p>
-Des:
##----------------------------------------
=Pkg: libmspack 0.0.20060920alpha 10 i586
=Sum: Library That Implements Different Microsoft Compressions
+Des:
<!-- DT:Rich -->
<p>The purpose of libmspack is to provide both compression and decompression of some loosely related file formats used by Microsoft. Currently the most common formats are implemented.
</p>
-Des:
##----------------------------------------
=Pkg: libmsrpc 3.0.23d 6 i586
=Sum: Samba msrpc Library
+Des:
<!-- DT:Rich -->
<p>This package includes the libmsrpc library.
</p>
-Des:
##----------------------------------------
=Pkg: libmtp 0.0.19 16 i586
=Sum: Access to MTP Players
+Des:
<!-- DT:Rich -->
<p>This package contains a library that allows access
to USB based media players based on the MTP (Media Transfer
Protocol) authored by Microsoft. Common devices using this
technology are Creative Zen, iRiver, Samsung and others.
</p>
-Des:
##----------------------------------------
=Pkg: libmudflap41 4.1.2_20061115 5 i586
=Sum: The Mudflap Extension Runtime Library
+Des:
<!-- DT:Rich -->
<p>This is the Mudflap Extension Runtime Library.
</p>
-Des:
##----------------------------------------
=Pkg: libmusicbrainz 2.1.4 18 i586
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index.
This server is designed to enable audio CD, MP3 and Vorbis players to download
metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libnet 1.1.2.1 36 i586
=Sum: A C Library for Portable Packet Creation
+Des:
<!-- DT:Rich -->
<p>Libnet is an API to help with the construction and handling of network packets.
It provides a portable framework for low-level network packet writing and
handling. Libnet includes packet creation at the IP layer and at the link
layer as well as a host of supplementary and complementary functionality. Libnet
is very useful for writing network tools and network test code. See the
man page and sample test code for more detailed information.
</p>
-Des:
##----------------------------------------
=Pkg: libnetpbm 1.0.0 676 i586
=Sum: Libraries for the NetPBM (NetPortableBitmap) Graphic Formats
+Des:
<!-- DT:Rich -->
<p>These are the libs for the netpbm graphic formats. The tools can be found
in the netpbm package.
The sources are contained in the netpbm source package.
</p>
-Des:
##----------------------------------------
=Pkg: libnjb 2.2.5 22 i586
=Sum: Nomad Jukebox API
+Des:
<!-- DT:Rich -->
<p>Nomad Jukebox API
</p>
-Des:
##----------------------------------------
=Pkg: libnl 1.0 36 i586
=Sum: Convenience library for kernel netlink sockets
+Des:
<!-- DT:Rich -->
<p>This package contains a convenience library to simplify
using the Linux kernels netlink sockets interface for
network manipulation.
</p>
-Des:
##----------------------------------------
=Pkg: libnotify 0.4.2 22 i586
=Sum: Notifications Library
+Des:
<!-- DT:Rich -->
<p>D-BUS notifications library.
</p>
-Des:
##----------------------------------------
=Pkg: libnscd 2.0.1 15 i586
=Sum: Library to Allow Applications to Communicate with nscd
+Des:
<!-- DT:Rich -->
<p>This library provides an interface for applications to NSCD (Name Service Cache Daemon) and allows
those applications, if they have the necessary permissions, to flush
the cache for special services.
</p>
-Des:
##----------------------------------------
=Pkg: libnscd-devel 2.0.1 15 i586
=Sum: Include Files and Libraries for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that needs to communicate with a running nscd.
</p>
-Des:
##----------------------------------------
=Pkg: libnvtv 0.4.7a 46 i586
=Sum: Simple API library for nvtv
+Des:
<!-- DT:Rich -->
<p>This is the simple API library for nvtv, which uses the client backend
to access nvtvd.
</p>
-Des:
##----------------------------------------
=Pkg: libofa 0.9.3 12 i586
=Sum: Open Fingerprint Architecture Library
+Des:
<!-- DT:Rich -->
<p>MusicDNS and the Open Fingerprint Architecture provide a system for identifying a piece of music with nothing more than the sound of the piece itself.
</p><p>
This library is by design compatible with the MusicDNS web service.
Non-commercial access to the service is available at http://www.musicdns.org.
</p>
-Des:
##----------------------------------------
=Pkg: libofx 0.8.2 18 i586
=Sum: OFX Command Parser and API
+Des:
<!-- DT:Rich -->
<p>LibOFX is a parser and API designed to allow applications to support OFX command responses, usually provided by financial institutions for statement downloads. The author says, "To my knowledge, it is the first working OpenSource implementations of the OFX (Open Financial eXchange) specification on the client side. This project was first started as my end of degree project, with the goal of adding OFX support to GnuCash. It has since evolved into a generic library, so all OpenSource Financial software can benefit from it."
</p>
-Des:
##----------------------------------------
=Pkg: libofx-devel 0.8.2 18 i586
=Sum: OFX Command Parser and API
+Des:
<!-- DT:Rich -->
<p>LibOFX is a parser and API designed to allow applications to support OFX command responses, usually provided by financial institutions for statement downloads. The author says, "To my knowledge, it is the first working OpenSource implementations of the OFX (Open Financial eXchange) specification on the client side. This project was first started as my end of degree project, with the goal of adding OFX support to GnuCash. It has since evolved into a generic library, so all OpenSource Financial software can benefit from it."
</p>
-Des:
##----------------------------------------
=Pkg: libogg 1.1.3 31 i586
=Sum: Ogg Bitstream Library
+Des:
<!-- DT:Rich -->
<p>Libogg is a library for manipulating ogg bitstreams. It handles
both making ogg bitstreams and getting packets from ogg bitstreams.
</p>
-Des:
##----------------------------------------
=Pkg: libogg-devel 1.1.3 31 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: liboggz 0.9.4 27 i586
=Sum: Library for simple parsing and seeking of files and streams based on the Ogg file format
+Des:
<!-- DT:Rich -->
<p>liboggz is a library that provides simple parsing and seeking of files
and streams based on the Ogg file format. liboggz requires libogg to
work.
</p><p>
liboggz knows about Ogg speex, Ogg vorbis, Ogg theora, and the Ogg
based Annodex formats, thus allows parsing (though not decoding) of
these files.
</p>
-Des:
##----------------------------------------
=Pkg: liboil 0.3.9 15 i586
=Sum: Library of Optimized Inner Loops
+Des:
<!-- DT:Rich -->
<p>Liboil is a library of simple functions that are optimized for various CPUs. These functions are generally loops implementing simple algorithms, such as converting an array of N integers to floating-point numbers or multiplying and summing an array of N numbers. Such functions are candidates for significant optimization using various techniques, especially by using extended instructions provided by modern CPUs (Altivec, MMX, SSE, etc.).
</p><p>
Many multimedia applications and libraries already do similar things internally. The goal of this project is to consolidate some of the code used by various multimedia projects and also make optimizations easier to use by a broader range of applications.
</p>
-Des:
##----------------------------------------
=Pkg: liboil-devel 0.3.9 15 i586
=Sum: Library of Optimized Inner Loops
+Des:
<!-- DT:Rich -->
<p>Liboil is a library of simple functions that are optimized for various CPUs. These functions are generally loops implementing simple algorithms, such as converting an array of N integers to floating-point numbers or multiplying and summing an array of N numbers. Such functions are candidates for significant optimization using various techniques, especially by using extended instructions provided by modern CPUs (Altivec, MMX, SSE, etc.).
</p><p>
Many multimedia applications and libraries already do similar things internally. The goal of this project is to consolidate some of the code used by various multimedia projects, and also make optimizations easier to use by a broader range of applications.
</p>
-Des:
##----------------------------------------
=Pkg: libopencdk 0.5.10 13 i586
=Sum: Library Providing Basic Parts of the OpenPGP Message Format
+Des:
<!-- DT:Rich -->
<p>For reference, read RFC2440. Due to some possible security problems, the library also implements parts of draft-ietf-openpgp-rfc2440bis-06.txt.
</p><p>
The aim of the library is not to replace any available OpenPGP version. There is no real support for key management (sign, revoke, alter preferences, etc.) and some other parts are only rudimentarily available. The main purpose is to handle and understand OpenPGP packets and to use basic operations. For example, to encrypt and decrypt, sign and verify, and provide packet routines.
</p>
-Des:
##----------------------------------------
=Pkg: libopencdk-devel 0.5.10 13 i586
=Sum: Development tools for programs which will use the opencdk library
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and static libraries for
developing programs which will be linked against the opencdk library.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync 0.20 11 i586
=Sum: A Platform and Distribution Independent Synchronization Framework
+Des:
<!-- DT:Rich -->
<p>OpenSync is a synchronization framework that is platform and distribution independent.
It consists of several plug-ins that can be used to connect to devices, a powerful sync engine, and the framework itself.
The synchronization framework is kept very flexible and is capable of synchronizing any type of data, including contacts, calendar, tasks, notes, and files.
</p><p>
To sync various sources, additionally install the plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-devel 0.20 11 i586
=Sum: Header files, libraries and development documentation for libopensync
+Des:
<!-- DT:Rich -->
<p>This package contains the header files, static libraries and development
documentation for libopensync. If you like to develop programs using libopensync, you will need to install this package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-evolution2 0.20 9 i586
=Sum: Evolution 2 Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from
Evolution 2.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-file 0.20 7 i586
=Sum: File Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from
files stored on disk.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-gnokii 0.20 8 i586
=Sum: Gnokii Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from Nokia cell phones which don't support SyncML. Based on gnokii library.
=Sum: Google Calendar Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from Google Calendar.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-gpe 0.20 7 i586
=Sum: GPE Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from handhelds which use GPE.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-irmc 0.20 7 i586
=Sum: IrMC Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from cell phones with IrMC support (such as Sony Ericsson K750i, Siemens S55).
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-kdepim 0.20 12 i586
=Sum: KDE PIM Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p></p><p>
This plug-in allows applications using OpenSync to synchronize to and from
KDE Addressbook.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-moto 0.20 8 i586
=Sum: Motorola Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from
Motorola cellphones which doesn't support SyncML via Obex (e.g. Razr V3(i), L7, V635).
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-opie 0.20 7 i586
=Sum: Opie Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from Opie/OpenZaurus and Zaurus (2.X ROM) devices.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-palm 0.20 9 i586
=Sum: Palm Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from Palm devices.
<p>This module allows Python based plugins using OpenSync.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-sunbird 0.20 7 i586
=Sum: Mozilla Calendar / Sunbird Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from Mozilla Calendar / Sunbird.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-syncml 0.20 13 i586
=Sum: SyncML Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from SyncML based devices.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-tools 0.20 11 i586
=Sum: Tools for libopensync
+Des:
<!-- DT:Rich -->
<p>OpenSync is a synchronization framework that is platform and distribution independent.
This package contains some tools needed for testing and debugging it.
</p>
-Des:
##----------------------------------------
=Pkg: libosip2 2.2.0 39 i586
=Sum: Implementation of SIP--RFC 3261
+Des:
<!-- DT:Rich -->
<p>This is the GNU oSIP library. It has been designed
to provide the Internet community with a simple way to
support the Session Initiation Protocol. SIP is
described in the RFC 3261, which is available at
http://www.ietf.org/rfc/rfc3261.txt.
</p>
-Des:
##----------------------------------------
=Pkg: libotf 0.9.4 30 i586
=Sum: Library for Handling OpenType Fonts
+Des:
<!-- DT:Rich -->
<p>Library for handling OpenType fonts.
</p>
-Des:
##----------------------------------------
=Pkg: libotf-devel 0.9.4 30 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libotr 3.0.0 35 i586
=Sum: "Off The Record" messaging library toolkit
+Des:
<!-- DT:Rich -->
<p>Off-the-Record (OTR) Messaging allows you to have private conversations
over instant messaging by providing:
Encryption
No one else can read your instant messages.
Authentication
You are assured the correspondent is who you think it is.
Deniability
The messages you send do not have digital signatures that are checkable
by a third party. Anyone can forge messages after a conversation to make
them look like they came from you. However, during a conversation, your
correspondent is assured the messages he sees are authentic and
unmodified.
Perfect forward secrecy
If you lose control of your private keys, no previous conversation is
compromised.
</p>
-Des:
##----------------------------------------
=Pkg: libpcap 0.9.4 30 i586
=Sum: A Library for Network Sniffers
+Des:
<!-- DT:Rich -->
<p>libpcap is a library used by packet sniffer programs. It provides an
interface for them to capture and analyze packets from network devices.
This package is only needed if you plan to compile or write such a
program yourself.
</p>
-Des:
##----------------------------------------
=Pkg: libpng 1.2.12 23 i586
=Sum: Library for the Portable Network Graphics Format
+Des:
<!-- DT:Rich -->
<p>libpng is the official PNG reference library.
</p>
-Des:
##----------------------------------------
=Pkg: libpng-devel 1.2.12 23 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libpqxx 2.5.5 33 i586
=Sum: C++ Client Library for PostgreSQL
+Des:
<!-- DT:Rich -->
<p>C++ client API for PostgreSQL. This is the standard front-end (in the sense of "language binding") for writing C++ programs that use PostgreSQL. This supersedes the older libpq++ interface. It requires an up-to-date C++ compiler, such as gcc 2.95 or better.
</p>
-Des:
##----------------------------------------
=Pkg: libpri 1.2.4 20 i586
=Sum: ISDN Library
+Des:
<!-- DT:Rich -->
<p>libpri is a C implementation of the Primary Rate ISDN specification.
It has been extended to support Basic Rate ISDN as well.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4 4.2.1 18 i586
=Sum: C++ Program Library, Core Components
+Des:
<!-- DT:Rich -->
<p>Qt is a set of libraries for developing applications.
</p><p>
This package contains base tools, like string, xml, and network handling.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-dbus-1 4.2.1 18 i586
=Sum: C++ Program Library, D-BUS Bindings
+Des:
<!-- DT:Rich -->
<p>Qt is a set of libraries for developing applications.
</p><p>
This package contains the D-BUS Qt bindings.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-devel 4.2.1 18 i586
=Sum: Qt Development Kit
+Des:
<!-- DT:Rich -->
<p>You need this package, if you want to compile programs with Qt. It
contains the "Qt Crossplatform Development Kit". It does contain include files and development applications like GUI designers, translator tools and code generators.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-devel-doc 4.2.1 18 i586
=Sum: Qt documentation
+Des:
<!-- DT:Rich -->
<p>The package contains documentation and examples to develop Qt
applications. The SuSE help provides a search function for this documentation.
The package includes also a tutorial and examples.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-qt3support 4.2.1 18 i586
=Sum: C++ Program Library, Core Components
+Des:
<!-- DT:Rich -->
<p>Qt is a set of libraries for developing applications.
</p><p>
This package contains base tools, like string, xml, and network handling.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql 4.2.1 18 i586
=Sum: Qt 4 SQL related libraries
+Des:
<!-- DT:Rich -->
<p>Qt 4 libraries which are used for connection with an SQL server.
You will need also a plugin package for a supported SQL server.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-mysql 4.2.1 7 i586
=Sum: Qt 4 MySQL support
+Des:
<!-- DT:Rich -->
<p>A plugin to support MySQL server in Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-postgresql 4.2.1 7 i586
=Sum: Qt 4 PostgreSQL plugin
+Des:
<!-- DT:Rich -->
<p>Qt SQL plugin to support PostgreSQL servers in Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-sqlite 4.2.1 7 i586
=Sum: Qt 4 sqlite plugin
+Des:
<!-- DT:Rich -->
<p>Qt 4 sqlite plugin to be able to use database functionality with Qt applications without the need to setup a SQL server.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-unixODBC 4.2.1 7 i586
=Sum: Qt 4 unixODBC plugin
+Des:
<!-- DT:Rich -->
<p>Qt unixODBC plugin to support databases via unixODBC within Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-x11 4.2.1 18 i586
=Sum: Qt 4 GUI related libraries
+Des:
<!-- DT:Rich -->
<p>Qt 4 libraries which are used for drawing widgets and OpenGL items.
</p>
-Des:
##----------------------------------------
=Pkg: libqtpod 0.3 18 i586
=Sum: a Qt based library to access the data on an Apple iPod
+Des:
<!-- DT:Rich -->
<p>A Qt based library to access the data on an Apple iPod
</p>
-Des:
##----------------------------------------
=Pkg: libquicktime 0.9.10 18 i586
=Sum: A Library for Reading and Writing Quicktime Movie Files
+Des:
<!-- DT:Rich -->
<p>A library for reading and writing Quicktime movie files,
based on and forked from quicktime4linux.
</p>
-Des:
##----------------------------------------
=Pkg: libquicktime-devel 0.9.10 18 i586
=Sum: library for reading/writing quicktime movie files
+Des:
<!-- DT:Rich -->
<p>library for reading/writing quicktime movie files,
based on and forked from quicktime4linux
</p>
-Des:
##----------------------------------------
=Pkg: libraw1394 1.2.1 20 i586
=Sum: A Firewire Interface
+Des:
<!-- DT:Rich -->
<p>A library for the Linux IEEE-1394 subsystem, which provides
direct access to the connected 1394 (Firewire) bus.
</p>
-Des:
##----------------------------------------
=Pkg: libraw1394-devel 1.2.1 20 i586
=Sum: Development and Include Files for Libraw1394
+Des:
<!-- DT:Rich -->
<p>Libraw1394 is the only supported interface to the kernel side raw1394 of the Linux IEEE-1394 subsystem, which provides the user space direct access to the connected 1394 buses. Through libraw1394/raw1394, applications can directly send to and receive from other nodes without requiring a kernel driver for the protocol in question.
</p><p>
This archive contains the header files for libraw1394 development.
</p>
-Des:
##----------------------------------------
=Pkg: libreiserfs 0.3.0.5 35 i586
=Sum: ReiserFS File System Access Library
+Des:
<!-- DT:Rich -->
<p>This is a library for reiserfs file system access and manipulation.
The primary goal is to develop the nice, full functionality library
that can be linked to any projects that needed reiserfs file system
access. These include GNU Parted, GNU GRUB, Yaboot, Partimage, and EVMS.
</p><p>
The second goal is high maintainability source code.
</p><p>
The third goal is to develop an alternative set of the reiserfs programs as
small and nice front-ends to this library.
</p><p>
libreiserfs has a number of high level APIs for accessing reiserfs
file systems. There are main file system code (reiserfs_fs_open, reiserfs_fs_close, reiserfs_fs_create, reiserfs_fs_resize, reiserfs_fs_journal_tune, etc), journal code, bitmap code, directories
and files access code, and device abstraction layer.
</p><p>
progsreiserfs supports versions 3.5 and 3.6 with standard and relocated journal.
It also supports all possible block sizes supported by the kernel (2.4.18 with patches or 2.4.19).
</p><p>
The project home page is http://reiserfs.linux.kiev.ua/.
</p>
-Des:
##----------------------------------------
=Pkg: librpcsecgss 0.14 21 i586
=Sum: Library Implementing GSSAPI Security for ONC RPC
+Des:
<!-- DT:Rich -->
<p>This library implements the GSS security mechanism for ONC RPC.
It can be used to provide strong authentication and security for NFS.
</p>
-Des:
##----------------------------------------
=Pkg: librsvg 2.16.0 28 i586
=Sum: A Library for Rendering SVG Data
+Des:
<!-- DT:Rich -->
<p>This package contains a library to render SVG (scalable vector graphics)
data. This format has been specified by the W3C (see http://www.w3c.org).
</p>
-Des:
##----------------------------------------
=Pkg: librsvg-devel 2.16.0 28 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libsamplerate 0.1.2 33 i586
=Sum: A Sample Rate Converter Library
+Des:
<!-- DT:Rich -->
<p>Secret Rabbit Code (aka libsamplerate) is a Sample Rate Converter for audio. One example of where such a thing would be useful is in converting audio from the CD sample rate of 44.1kHz to the 48kHz sample rate used by DAT players.
</p><p>
SRC is capable of arbitrary and time varying conversions; from downsampling by a factor of 12 to upsampling by the same factor. The conversion ratio can also vary with time for speeding up and slowing down effects.
</p>
-Des:
##----------------------------------------
=Pkg: libsap 1.51.1 553 i586
=Sum: Library for Playing Atari XL/XE Tunes
+Des:
<!-- DT:Rich -->
<p>libSap is a Linux port of the SAP Library, a software emulation of the 6502
microprocessor and the Pokey chip. Those two chips are used in Atari XL/XE
computers. SAP Library is used to run programs written in 6502 machine
language, programs that are using the Pokey chip to play tunes and sounds.
</p><p>
This package also contains sapplay, a simple command line-based player.
</p>
-Des:
##----------------------------------------
=Pkg: libsexy 0.1.5 37 i586
=Sum: Extended Widgets for GTK+
+Des:
<!-- DT:Rich -->
<p>A set of extensions on top of GTK+ widgets, to provide extra functionality.
</p>
-Des:
##----------------------------------------
=Pkg: libshout 2.2.2 18 i586
=Sum: Library for Communication with icecast Server
+Des:
<!-- DT:Rich -->
<p>Libshout is a library for communicating with and sending data to an icecast server. It handles the socket connection, the timing of the data, and prevents bad data from getting to the icecast server.
</p>
-Des:
##----------------------------------------
=Pkg: libsidplay 2.1.1 35 i586
=Sum: A Player for C64 Music Files
+Des:
<!-- DT:Rich -->
<p>This package allows you to play music from C64 games and demos on your PC.
</p><p>
You can find a comprehensive archive on the WWW at:
http://www.hvsc.c64.org/
</p>
-Des:
##----------------------------------------
=Pkg: libsidplay1 1.36.59 31 i586
=Sum: A Library for C64 Music Files
+Des:
<!-- DT:Rich -->
<p>This package allows you create packages able to play music from C64 games and demos on your PC.
</p><p>
You can find a comprehensive archive on the WWW at:
http://www.hvsc.c64.org/
</p>
-Des:
##----------------------------------------
=Pkg: libsigc++12 1.2.7 35 i586
=Sum: Typesafe Signal Framework for C++
+Des:
<!-- DT:Rich -->
<p>This library implements a full callback system for use in widget
libraries, abstract interfaces, and general programming. It is the most
complete library of its kind with the ability to connect an abstract
callback to a class method, function, or function object. It contains
adaptor classes for connection of dissimilar callbacks and has an ease
of use unmatched by other C++ callback libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libsigc++12-devel 1.2.7 35 i586
=Sum: Typesafe Signal Framework for C++
+Des:
<!-- DT:Rich -->
<p>This library implements a full callback system for use in widget
libraries, abstract interfaces, and general programming. It is the most
complete library of its kind with the ability to connect an abstract
callback to a class method, function, or function object. It contains
adaptor classes for connection of dissimilar callbacks and has an ease
of use unmatched by other C++ callback libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libsigc++2 2.0.17 32 i586
=Sum: Typesafe Signal Framework for C++
+Des:
<!-- DT:Rich -->
<p>This library implements a full callback system for use in widget
libraries, abstract interfaces, and general programming. It is the most
complete library of its kind with the ablity to connect an abstract
callback to a class method, function, or function object. It contains
adaptor classes for connection of dissimilar callbacks and has an ease
of use unmatched by other C++ callback libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libsigc++2-devel 2.0.17 32 i586
=Sum: Typesafe Signal Framework for C++
+Des:
<!-- DT:Rich -->
<p>This library implements a full callback system for use in widget
libraries, abstract interfaces, and general programming. It is the most
complete library of its kind with the ability to connect an abstract
callback to a class method, function, or function object. It contains
adaptor classes for connection of dissimilar callbacks and has an ease
of use unmatched by other C++ callback libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libsmbclient 3.0.23d 6 i586
=Sum: Samba Client Library
+Des:
<!-- DT:Rich -->
<p>This package includes the libsmbclient library.
</p>
-Des:
##----------------------------------------
=Pkg: libsmbclient-devel 3.0.23d 6 i586
=Sum: Libraries and Header Files to Develop Programs with smbclient Support
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries and header files needed to develop
programs which make use of the smbclient programming interface.
</p>
-Des:
##----------------------------------------
=Pkg: libsndfile 1.0.17 21 i586
=Sum: A Library to Handle Various Audio File Formats
+Des:
<!-- DT:Rich -->
<p>Libsndfile is a C library for reading and writing sound files, such as
AIFF, AU, and WAV files, through one standard interface. It can currently
read and write 8, 16, 24, and 32-bit PCM files as well as 32-bit floating point
WAV files and a number of compressed formats.
</p>
-Des:
##----------------------------------------
=Pkg: libsndfile-progs 1.0.17 21 i586
=Sum: Example Programs for libsndfile
+Des:
<!-- DT:Rich -->
<p>This package includes the example programs for libsndfile.
</p>
-Des:
##----------------------------------------
=Pkg: libsoup 2.2.96 22 i586
=Sum: Simple Object Access Protocol (SOAP)
+Des:
<!-- DT:Rich -->
<p>Soup is a SOAP (Simple Object Access Protocol) implementation in C.
</p><p>
It provides a queued asynchronous callback-based mechanism for sending and
servicing SOAP requests and a WSDL (Web Service Definition Language) to C
compiler that generates client stubs and server skeletons for easily calling
and implementing SOAP methods.
</p><p>
It uses the Glib main loop and is designed to work well with GTK+
applications. This enables GNOME applications to access SOAP servers
on the network in a completely asynchronous fashion, very similar to the
GTK+ programming model (a synchronous operation mode is also supported
for those who want it).
</p><p>
The WSDL compiler helps you make your applications interoperate
with services that expose their descriptions through WSDL.
</p>
-Des:
##----------------------------------------
=Pkg: libsoup-devel 2.2.96 22 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>Soup is a SOAP (Simple Object Access Protocol) implementation in C. It
provides a queued, asynchronous callback-based mechanism for sending
SOAP requests.
This package allows you to develop applications that use the Soup
library.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++-devel 4.1.3 29 i586
=Sum: The system GNU C++ development files
+Des:
<!-- DT:Rich -->
<p>The system GNU C++ development files.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++41 4.1.2_20061115 5 i586
=Sum: The standard C++ shared library
+Des:
<!-- DT:Rich -->
<p>The standard C++ library, needed for dynamically linked C++ programs.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++41-devel 4.1.2_20061115 5 i586
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all the headers and libraries of the standard C++ library.
It is needed for compiling C++ code.
</p><p>
The source code is in the package gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libstroke 0.5.1 37 i586
=Sum: A Stroke Translation Library
+Des:
<!-- DT:Rich -->
<p>LibStroke is a stroke interface library. Strokes are motions
of the mouse that can be interpreted by a program as a command. Strokes
are used extensively in CAD programs.
</p>
-Des:
##----------------------------------------
=Pkg: libstroke-devel 0.5.1 37 i586
=Sum: Development package for libstroke
+Des:
<!-- DT:Rich -->
<p>This package is needed if you want to program or compile applications that
use libstroke.
</p>
-Des:
##----------------------------------------
=Pkg: libsvg 0.1.4 34 i586
=Sum: Library for SVG Files
+Des:
<!-- DT:Rich -->
<p>libsvg provides a parser for SVG content in files or buffers.
</p>
-Des:
##----------------------------------------
=Pkg: libsvg-cairo 0.1.6 35 i586
=Sum: Render SVG Content Using cairo
+Des:
<!-- DT:Rich -->
<p>libsvg-cairo provides the ability to render SVG content from files or
buffers. All rendering is performed using the cairo rendering library.
</p>
-Des:
##----------------------------------------
=Pkg: libsyncml 0.4.2 9 i586
=Sum: Library providing support for the SyncML protocol
+Des:
<!-- DT:Rich -->
<p>Libsyncml is a implementation of the SyncML protocol.
It allows programs like OpenSync the synchronization of
SyncML-enabled devices, such as the SonyEricsson P800, as well as remote
OpenSync to OpenSync synchronization over the internet.
You need to install the libopensync-* packages and msynctool for that, too.
</p>
-Des:
##----------------------------------------
=Pkg: libtabe 0.2.6 450 i586
=Sum: A Library for Chinese Language Processing Used in Input Methods
+Des:
<!-- DT:Rich -->
<p>libtabe is a library that provides useful Chinese functions and routines that deal with many
fundamental elements, such as pronunciation(BoPoMoFo), character
frequency, word identification, and word frequency. libtabe also comes with a
free word database consisting of 140,000 words.
</p><p>
</p><p>
More functionality is expected to be put into the library in the future.
</p><p>
</p><p>
A practical application of libtabe is the intelligent phonetic input
method interface, bims. bims accepts input in BoPoMoFo and generates
output as meaningful sentences.
</p><p>
</p><p>
The XCIN-2.5 bimsphone module is based directly on libtabe and bims.
In the future, more modules might also be based on it.
</p>
-Des:
##----------------------------------------
=Pkg: libtabe-devel 0.2.6 450 i586
=Sum: Development Libraries and Header Files for libtabe Library
+Des:
<!-- DT:Rich -->
<p>This package provides the development libraries and header files for the libtabe library.
</p>
-Des:
##----------------------------------------
=Pkg: libtheora 1.0alpha5 41 i586
=Sum: Free Video Codec
+Des:
<!-- DT:Rich -->
<p>Theora is a free video codec based on VP3. The package contains the library
that can decode and encode Theora streams. Theora is also able to playback VP3 streams.
</p>
-Des:
##----------------------------------------
=Pkg: libtidy 1.0 6 i586
=Sum: A library to clean up and pretty-print HTML/XHTML/XML
+Des:
<!-- DT:Rich -->
<p>When editing HTML it's easy to make mistakes. Wouldn't it be nice if
there was a simple way to fix these mistakes automatically and tidy up
sloppy editing into nicely layed out markup? Well now there is! Dave
Raggett's HTML TIDY is a free utility for doing just that. It also works
great on the atrociously hard to read markup generated by specialized
HTML editors and conversion tools, and can help you identify where you
need to pay further attention on making your pages more accessible to
people with disabilities.
</p><p>
</p><p>
Tidy is able to fix up a wide range of problems and to bring to your
attention things that you need to work on yourself. Each item found is
listed with the line number and column so that you can see where the
problem lies in your markup. Tidy won't generate a cleaned up version
when there are problems that it can't be sure of how to handle. These
are logged as "errors" rather than "warnings".
</p><p>
</p><p>
There is a standalone binary /usr/bin/tidy built on this library,
contained in the package "tidy".
</p>
-Des:
##----------------------------------------
=Pkg: libtiff 3.8.2 25 i586
=Sum: The Tiff Library (with JPEG and compression support)
+Des:
<!-- DT:Rich -->
<p>This package includes the tiff libraries. To link a program with libtiff, you will have to add
-ljpeg and -lz to include the necessary libjpeg and libz
in the linking process.
</p>
-Des:
##----------------------------------------
=Pkg: libtiff-devel 3.8.2 25 i586
=Sum: Development Tools for Programs which will use the libtiff Library
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and static libraries for
developing programs which will manipulate TIFF format image files
using the libtiff library.
</p>
-Des:
##----------------------------------------
=Pkg: libtomoe-gtk 0.1.0 35 i586
=Sum: TOMOE GTK+ library
+Des:
<!-- DT:Rich -->
<p>TOMOE GTK+ library
</p>
-Des:
##----------------------------------------
=Pkg: libtool 1.5.22 34 i586
=Sum: A Tool to Build Shared Libraries
+Des:
<!-- DT:Rich -->
<p>GNU libtool is a set of shell scripts to automatically configure
UNIX architectures to build shared libraries in a generic fashion.
</p>
-Des:
##----------------------------------------
=Pkg: libtunepimp 0.5.2 11 i586
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index.
This server is designed to enable Audio CD, MP3, and Vorbis players to download
metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libunwind 0.98.5 37 i586
=Sum: Unwind Library
+Des:
<!-- DT:Rich -->
<p>A portable and efficient C programming interface (API) to determine the call chain of a program.
</p>
-Des:
##----------------------------------------
=Pkg: libunwind-devel 0.98.5 37 i586
=Sum: Unwind library
+Des:
<!-- DT:Rich -->
<p>A portable and efficient C programming interface (API) to determine the call-chain of a program.
</p>
-Des:
##----------------------------------------
=Pkg: libusb 0.1.12 27 i586
=Sum: USB Libraries
+Des:
<!-- DT:Rich -->
<p>Libusb is a library that allows userspace access to USB devices.
</p>
-Des:
##----------------------------------------
=Pkg: libvisual 0.4.0 24 i586
=Sum: Sound Visualization Library
+Des:
<!-- DT:Rich -->
<p>Libvisual is a library that acts as a middle layer between
applications that want audio visualization and audio visualization
plug-ins.
</p><p>
This library is used by amaroK, for example.
</p>
-Des:
##----------------------------------------
=Pkg: libvisual-devel 0.4.0 24 i586
=Sum: sound visualisation library
+Des:
<!-- DT:Rich -->
<p>Libvisual is a library that acts as a middle layer between
applications that want audio visualisation and audio visualisation
plugins.
</p><p>
This library is used by amaroK for example.
</p>
-Des:
##----------------------------------------
=Pkg: libvisual-plugins 0.4.0 33 i586
=Sum: Sound Visualization Library Plug-Ins
+Des:
<!-- DT:Rich -->
<p>Libvisual is a library that acts as a middle layer between
applications that want audio visualization and audio visualization
plug-ins. This package contains various plug-ins like:
<ul>
<li>bumpscope
</li><li>dna
</li><li>infinite
</li><li>jakdaw
</li><li>lv_analyzer
</li><li>lv_gltest
</li><li>lv_scope
</li><li>madspin
</li><li>oinksie
</li><li>plazma
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libvolume_id 103 12 i586
=Sum: Dynamic library, which contains functions to get volume ids
+Des:
<!-- DT:Rich -->
<p>Dynamic library, which contains functions to get volume ids.
</p>
-Des:
##----------------------------------------
=Pkg: libvorbis 1.1.2 31 i586
=Sum: The Vorbis General Audio Compression Codec
+Des:
<!-- DT:Rich -->
<p>Ogg Vorbis is a fully open, nonproprietary, patent-and-royalty-free,
and general-purpose compressed audio format for audio and music at fixed
and variable bit rates from 16 to 128 kbps/channel.
</p>
-Des:
##----------------------------------------
=Pkg: libvorbis-devel 1.1.2 31 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libwmf 0.2.8.4 24 i586
=Sum: Library and Utilities for Displaying and Converting Metafile Images
+Des:
<!-- DT:Rich -->
<p>This library interprets metafile images and can either display them
using the X Window System or convert them to standard formats such as PNG, JPEG, PS, EPS, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwmf-devel 0.2.8.4 24 i586
=Sum: Static libraries, header files and documentation for libwmf
+Des:
<!-- DT:Rich -->
<p>The libwmf-devel package contains the header files and static
libraries necessary for developing programs using libwmf.
</p>
-Des:
##----------------------------------------
=Pkg: libwmf-gnome 0.2.8.4 24 i586
=Sum: GNOME plugin for displaying and Converting Metafile Images
+Des:
<!-- DT:Rich -->
<p>This library interprets metafile images and can either display them
using the X Window System or convert them to standard formats such as PNG, JPEG, PS, EPS, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwnck 2.16.1 18 i586
=Sum: Window Navigator Construction Kit (Library Package)
+Des:
<!-- DT:Rich -->
<p>The Window Navigator Construction Kit is a library that can be used
to write task lists, pagers, and similar GNOME programs.
</p>
-Des:
##----------------------------------------
=Pkg: libwnck-devel 2.16.1 18 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libwpd 0.8.7 23 i586
=Sum: Library for Importing WordPerfect (tm) Documents
+Des:
<!-- DT:Rich -->
<p>libwpd is a general purpose library for reading or interpreting data from WordPerfect files. The library is not a stand-alone utility: it is designed to be used by another program (for example, a word processor) as an in-process component.
</p>
-Des:
##----------------------------------------
=Pkg: libwpd-devel 0.8.7 23 i586
=Sum: Library for importing WordPerfect (tm) documents
+Des:
<!-- DT:Rich -->
<p>libwpd is a general purpose library for reading (or, interpreting data from) WordPerfect files. The library is not a stand-alone utility: it is designed to be used by another program (e.g.: a word processor) as an in-process component.
</p>
-Des:
##----------------------------------------
=Pkg: libwpd-tools 0.8.7 23 i586
=Sum: Library for importing WordPerfect (tm) documents
+Des:
<!-- DT:Rich -->
<p>Tools to transform WordPerfect Documents into other formats.
Currently supported: html, raw, text
</p>
-Des:
##----------------------------------------
=Pkg: libxcrypt 2.4 30 i586
=Sum: Crypt Library for DES, MD5, and Blowfish
+Des:
<!-- DT:Rich -->
<p>Libxcrypt is a replacement for libcrypt, which comes with the
GNU C Library. It supports DES crypt, MD5, and passwords with
blowfish encryption.
</p>
-Des:
##----------------------------------------
=Pkg: libxcrypt-devel 2.4 30 i586
=Sum: Development Include Files and Libraries for enhanced crypt functionality
+Des:
<!-- DT:Rich -->
<p>libxcrypt is a replacement for libcrypt, which comes with the
GNU C Library. It supports DES crypt, MD5, and passwords with
blowfish encryption.
</p><p>
This package contains the header files and static libraries
necessary to develop software using libxcrypt.
</p>
-Des:
##----------------------------------------
=Pkg: libxklavier 3.0 24 i586
=Sum: Library with X Keyboard Related Functions
+Des:
<!-- DT:Rich -->
<p>This library allows you to simplify XKB-related development.
</p>
-Des:
##----------------------------------------
=Pkg: libxklavier-devel 3.0 24 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libxml++ 2.14.0 18 i586
=Sum: C++ Interface for XML Files
+Des:
<!-- DT:Rich -->
<p>libXML++ provides a C++ interface for XML files.
It presently uses libxml2 to access the XML files.
</p>
-Des:
##----------------------------------------
=Pkg: libxml 1.8.17 406 i586
=Sum: A Library to Manipulate XML Files
+Ins:
<!-- DT:Rich -->
<p>This version is deprecated. If you want to use libxml for your own project, use version 2 of this library (package libxml2).
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>XML is said to be the upcoming standard file format of the World Wide Web.
</p><p>
Applications use libxml to load and save extensible data structures
and the new Web format.
</p><p>
New applications should use version 2 of libxml (libxml2).
</p>
-Des:
##----------------------------------------
=Pkg: libxml2 2.6.26 26 i586
=Sum: A Library to Manipulate XML Files
+Des:
<!-- DT:Rich -->
<p>The XML C library was initially developed for the GNOME project. It is now
used by many programs to load and save extensible
data structures or manipulate any kind of XML files.
</p><p>
This library implements
a number of existing standards related to markup languages, including the
XML standard, name spaces in XML, XML Base, RFC 2396, XPath, XPointer,
HTML4, XInclude, SGML catalogs, and XML catalogs. In most cases, libxml
tries to implement the specification in a rather strict way. To some
extent, it provides support for the following specifications, but does not
claim to implement them: DOM, FTP client, HTTP client, and SAX.
</p><p>
The library also supports RelaxNG. Support for W3C XML Schemas is in progress.
</p>
-Des:
##----------------------------------------
=Pkg: libxml2-devel 2.6.26 26 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libxml2-python 2.6.26 29 i586
=Sum: Python Bindings for libxml2
+Des:
<!-- DT:Rich -->
<p>The libxml2-python package contains a module that permits applications
written in the Python programming language to use the interface
supplied by the libxml2 library to manipulate XML files.
</p><p>
This library allows manipulation of XML files. It includes support
for reading, modifying, and writing XML and HTML files. There is DTD support
that includes parsing and validation even with complex DTDs, either
at parse time or later once the document has been modified.
</p>
-Des:
##----------------------------------------
=Pkg: libxslt 1.1.17 23 i586
=Sum: XSL Transformation Library
+Des:
<!-- DT:Rich -->
<p>This C library allows you to transform XML files into other XML files
(or HTML, text, and more) using the standard XSLT stylesheet transformation
mechanism.
</p><p>
It is based on libxml (version 2) for XML parsing, tree manipulation, and
XPath support. It is written in plain C, making as few assumptions as
possible and sticks closely to ANSI C/POSIX for easy embedding. Although not primarily designed
with performance in mind, libxslt seems to be a relatively fast
processor. It also includes full support for the EXSLT set of extension
functions as well as some common extensions present in other XSLT engines.
</p><p>
The package comes with xsltproc, a command line interface to the XSLT engine.
</p>
-Des:
##----------------------------------------
=Pkg: libxslt-devel 1.1.17 23 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: liby2util 2.14.0 10 i586
=Sum: YaST2--Utilities Library
##----------------------------------------
=Pkg: liby2util-devel 2.14.0 10 i586
=Sum: YaST2 - Include Files and Documentation for Utilities Library
##----------------------------------------
=Pkg: libyaz 2.1.36 9 i586
=Sum: Z39.50 Library
+Des:
<!-- DT:Rich -->
<p>YAZ is a C library for developing client - and server applications
using the ANSI/NISO Z39.50 protocol for Information Retrieval.
</p>
-Des:
##----------------------------------------
=Pkg: libzio 0.2 20 i586
=Sum: A Library for Accessing Compressed Text Files
+Des:
<!-- DT:Rich -->
<p>Libzio provides a wrapper function for reading or writing gzip or bzip2
files with FILE streams.
</p>
-Des:
##----------------------------------------
=Pkg: libzypp 2.9.1 5 i586
=Sum: Package, Patch, Pattern, and Product Management
##----------------------------------------
=Pkg: libzypp-devel 2.9.1 5 i586
=Sum: Package, Patch, Pattern, and Product Management - developers files
##----------------------------------------
=Pkg: libzypp-zmd-backend 7.1.1.0_0.5 6 i586
=Sum: ZMD backend for Package, Patch, Pattern, and Product Management
+Des:
<!-- DT:Rich -->
<p>This package provides binaries which enable the ZENworks daemon (ZMD)
to perform its management tasks on the system.
</p>
-Des:
##----------------------------------------
=Pkg: liferea 1.0.20 34 i586
=Sum: Linux Feed Reader
+Des:
<!-- DT:Rich -->
<p></p><p>
Liferea is an abbreviation for Linux Feed Reader. It is a news
aggregator for online news feeds. It supports a number of different
feed formats including RSS/RDF, CDF, Atom, OCS, and OPML. There are
many other news readers available, but these others are not available
for Linux or require many extra libraries to be installed. Liferea
tries to fill this gap by creating a fast, easy-to-use, easy-to-install
news aggregator for GTK and GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: lilo 22.7 43 i586
=Sum: The Linux Loader, a Boot Menu
+Del:
<!-- DT:Rich -->
<p>This package is required for booting your Linux system.
</p><p>
Remove this package only if you have another boot loader configured and you know what you are doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>LILO boots Linux from your hard drive.
It can also boot other operating systems, such as MS-DOS and OS/2,
and can even boot DOS from the second hard drive.
The configuration file is /etc/lilo.conf.
</p><p>
The PowerPC variant can be used on new PowerMacs and CHRP machines.
</p><p>
The ix86 variant comes with Memtest86, offering an image that
can be booted to perform a memory test.
</p>
-Des:
##----------------------------------------
=Pkg: lilypond 2.8.7 15 i586
=Sum: Music Typesetter
+Des:
<!-- DT:Rich -->
<p>GNU LilyPond is a music typesetter.
</p>
-Des:
##----------------------------------------
=Pkg: lilypond-documentation 2.8.7 15 i586
=Sum: Music Typesetter
+Des:
<!-- DT:Rich -->
<p>GNU LilyPond is a music typesetter.
</p>
-Des:
##----------------------------------------
=Pkg: limal 1.2.9 5 i586
=Sum: LiMaL--Core Library
+Des:
<!-- DT:Rich -->
<p>Core library of LiMaL.
</p>
-Des:
##----------------------------------------
=Pkg: limal-bootloader 1.2.4 6 i586
=Sum: LiMaL--Boot Loader Configuration Library
+Des:
<!-- DT:Rich -->
<p>Boot loader configuration library for LiMaL.
</p>
-Des:
##----------------------------------------
=Pkg: limal-ca-mgm 1.2.9 4 i586
=Sum: LiMaL--CA Management Library
+Des:
<!-- DT:Rich -->
<p>The LiMaL CA Management Library provides methods for managing a
certificate authority.
</p>
-Des:
##----------------------------------------
=Pkg: limal-ca-mgm-perl 1.2.9 4 i586
=Sum: LiMaL - CA Management Library Perl Bindings
+Des:
<!-- DT:Rich -->
<p>The LiMaL CA Management Library provides methods for managing a
Certificate Authority.
</p><p>
This package provides the perl bindings to the CA Management Library.
</p>
-Des:
##----------------------------------------
=Pkg: limal-perl 1.2.9 5 i586
=Sum: LiMaL - Core Library Perl Bindings
+Des:
<!-- DT:Rich -->
<p>LiMaL - Core Library Perl Bindings
</p>
-Des:
##----------------------------------------
=Pkg: lincity 1.12.0 107 i586
=Sum: SimCity Clone
+Des:
<!-- DT:Rich -->
<p>Lincity is a well-designed and easy-to-play SimCity clone.
Besides the game itself, it provides an editor for easily creating
new levels and obstacles.
</p>
-Des:
##----------------------------------------
=Pkg: lineak_defaultplugin 0.9 23 i586
=Sum: Default Plug-In for Linux Support for Easy Access and Internet Keyboards
+Des:
<!-- DT:Rich -->
<p>LinEAK is a utility designed to enable the use and configuration of those
special keys on Internet, Easy Access, and Multimedia keyboards in Linux.
The package contains the default plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: lineak_kde 0.9 27 i586
=Sum: Plug-Ins and Add-Ons for KDE for the Linux Support for Easy Access and Internet Keyboards
+Des:
<!-- DT:Rich -->
<p>LinEAK is a utility designed to enable the use and configuration of those
special keys on Internet, Easy Access, and Multimedia keyboards in Linux.
The package contains the plug-ins for the use of various KDE applications.
The lineakd package must be installed.
</p>
-Des:
##----------------------------------------
=Pkg: lineak_xosdplugin 0.9 27 i586
=Sum: XOSD On-Screen Display Plug-In for the lineakd Daemon
+Des:
<!-- DT:Rich -->
<p>This plug-in allows display using the xosd library. It requires that you have the following configuration options in your lineakd.conf file:
Display_plugin = xosd
It also understands the following configuration directives.
Display_font =
Display_color =
Display_pos =
Display_align =
Display_timeout =
Display_hoffset =
Display_voffset =
Display_soffset =
</p>
-Des:
##----------------------------------------
=Pkg: lineakd 0.9 22 i586
=Sum: Linux Support for Easy Access and Internet Keyboards
+Des:
<!-- DT:Rich -->
<p>LinEAK is a utility designed to enable the use and configuration of those
special keys on Internet, Easy Access, and Multimedia keyboards in Linux.
</p>
-Des:
##----------------------------------------
=Pkg: links 2.1pre18 38 i586
=Sum: Text-Based WWW Browser
+Des:
<!-- DT:Rich -->
<p>Links is like Lynx--an easy-to-use browser for HTML documents and other
Internet services, like FTP, telnet, and news. Links provides a graphical interface
besides the text interface. It has good support for frames, supports ssl, and has
a little bit of JavaScript support.
</p>
-Des:
##----------------------------------------
=Pkg: linphone 1.3.0 32 i586
=Sum: Web Phone
+Des:
<!-- DT:Rich -->
<p>Linphone is a Web phone with a GNOME interface. It lets you
make two-party calls over IP networks such as the Internet.
It uses the IETF protocols SIP (Session Initiation Protocol)
and RTP (Realtime TransporT Protocol) to make calls, so it
should be able to communicate with other SIP-based Web phones.
With several codecs available, it can be used with high speed
connections as well as 28k modems.
</p>
-Des:
##----------------------------------------
=Pkg: linphone-applet 1.3.0 32 i586
=Sum: Web Phone
+Des:
<!-- DT:Rich -->
<p>Linphone is a Web phone with a GNOME interface. It let you
make two-party calls over IP networks such as the Internet.
It uses the IETF protocols SIP (Session Initiation Protocol)
and RTP (Realtime TransporT Protocol) to make calls, so it
should be able to communicate with other SIP-based Web phones.
With several codecs available, it can be used with high speed
connections as well as 28k modems.
</p>
-Des:
##----------------------------------------
=Pkg: linux-atm-lib 2.5.0 33 i586
=Sum: Libraries for ATM
+Des:
<!-- DT:Rich -->
<p>Libraries for ATM (Asynchronous Transfer Mode)
networking.
</p>
-Des:
##----------------------------------------
=Pkg: linux-kernel-headers 2.6.18.2 3 i586
=Sum: Linux Kernel Headers
+Des:
<!-- DT:Rich -->
<p>This package provides Linux kernel headers, the kernel API description required for compilation of almost all programs. This is the userspace interface; compiling external kernel modules requires kernel-source instead.
</p>
-Des:
##----------------------------------------
=Pkg: lirc 0.8.0 41 i586
=Sum: Tools for Infrared Receivers
+Des:
<!-- DT:Rich -->
<p>LIRC is a package that supports receiving and sending IR signals with the most
common IR remote controls. It contains a daemon that decodes and sends IR
signals, a mouse daemon that translates IR signals to mouse movements, and a
couple of user programs that allow you to control your computer with a remote
control.
</p>
-Des:
##----------------------------------------
=Pkg: lirc-kmp-bigsmp 0.8.0_2.6.18.2_34 10 i586
=Sum: LIRC kernel modules
+Des:
<!-- DT:Rich -->
<p>LIRC kernel modules are required to support certain hardware such as receivers for the serial port.
</p>
-Des:
##----------------------------------------
=Pkg: lirc-kmp-default 0.8.0_2.6.18.2_34 10 i586
=Sum: LIRC kernel modules
+Des:
<!-- DT:Rich -->
<p>LIRC kernel modules are required to support certain hardware such as receivers for the serial port.
</p>
-Des:
##----------------------------------------
=Pkg: lirc-kmp-xenpae 0.8.0_2.6.18.2_34 10 i586
=Sum: LIRC kernel modules
+Des:
<!-- DT:Rich -->
<p>LIRC kernel modules are required to support certain hardware such as receivers for the serial port.
</p>
-Des:
##----------------------------------------
=Pkg: lkcdutils 7.0.1 45 i586
=Sum: Linux Kernel Crash Dump (LKCD) Utilities
+Des:
<!-- DT:Rich -->
<p>This software package contains system crash dump analysis tools.
It includes Linux Crash (lcrash) and all appropriate user level
scripts required for saving and configuring system crash dumps.
</p>
-Des:
##----------------------------------------
=Pkg: logrotate 3.7.4 21 i586
=Sum: Rotate, Compress, Remove, and Mail System Log Files
+Des:
<!-- DT:Rich -->
<p>The logrotate utility is designed to simplify the administration of
log files on a system that generates a lot of log files. Logrotate
allows for the automatic rotation, compression, removal, and mailing of
log files. Logrotate can be set to handle a log file daily, weekly,
monthly, or when the log file gets to a certain size. Normally,
logrotate runs as a daily cron job.
</p>
-Des:
##----------------------------------------
=Pkg: loudmouth 1.0.5 15 i586
=Sum: Jabber Client Library Written in C
+Des:
<!-- DT:Rich -->
<p>Loudmouth is a lightweight and easy-to-use C library for programming with the Jabber protocol. It is designed to be easy to get started with and yet extensible to let you do anything the Jabber protocol allows.
</p>
-Des:
##----------------------------------------
=Pkg: loudmouth-devel 1.0.5 15 i586
=Sum: Jabber Client Library Written in C
+Des:
<!-- DT:Rich -->
<p>Loudmouth is a lightweight and easy-to-use C library for programming with the Jabber protocol. It's designed to be easy to get started with and yet extensible to let you do anything the Jabber protocol allows.
</p>
-Des:
##----------------------------------------
=Pkg: loudmouth-doc 1.0.5 15 i586
=Sum: Jabber Client Library Written in C
+Des:
<!-- DT:Rich -->
<p>Loudmouth is a lightweight and easy-to-use C library for programming with the Jabber protocol. It's designed to be easy to get started with and yet extensible to let you do anything the Jabber protocol allows.
</p>
-Des:
##----------------------------------------
=Pkg: lpdfilter 0.46 25 i586
=Sum: A Standard Printer Filter for Lpd
+Des:
<!-- DT:Rich -->
<p>Lpdfilter is a collection of scripts used for printing
various data with lpr(1) and lpd(8). An
entry for lpdfilter in /etc/printcap is required (see
printcap(5)) to enable these scripts. This can be done by using the lprsetup
script or by calling YaST2, which uses lprsetup.
</p>
-Des:
##----------------------------------------
=Pkg: lphdisk 0.9.1 328 i586
=Sum: Tool to Create Suspend Partition
+Des:
<!-- DT:Rich -->
<p>The lphdisk tool allows you to create a Suspend to Disk partition for
laptops that use Phoenix NoteBIOS. The tool is basically a Linux
replacement for the DOS-only tool PHDISK.EXE from Phoenix.
</p>
-Des:
##----------------------------------------
=Pkg: lprng 3.8.28 40 i586
=Sum: LPRng Print Spooler
+Des:
<!-- DT:Rich -->
<p>The LPRng software is an enhanced, extended, and portable implementation
of the Berkeley LPR print spooler functionality. While providing the
same interface and meeting RFC1179 requirements, the implementation
is completely new and provides support for the following features:
lightweight (no databases needed) lpr, lpc, and lprm programs; dynamic
redirection of print queues; automatic job holding; highly verbose
diagnostics; multiple printers serving a single queue; and a greatly
improved permission and authorization mechanism.
</p><p>
LPRng provides emulation packages for the SVR4 lp and lpstat programs,
eliminating the need for another print spooler package. These emulation
packages can be modified according to local requirements to
support vintage printing systems.
</p><p>
Attention: Interoperability with older LPD implementations
requires privileged access to ports. Therefore all affected
client-programs ship with SUID root privileges.
</p>
-Des:
##----------------------------------------
=Pkg: lsb 3.1 22 i586
=Sum: Linux Standard Base Core
+Des:
<!-- DT:Rich -->
<p>Necessary files and dependencies for the Linux Standard Base (LSB) Core.
</p>
-Des:
##----------------------------------------
=Pkg: lsof 4.77 10 i586
=Sum: A Program That Lists Information about Files Opened by Processes
+Des:
<!-- DT:Rich -->
<p>Lsof lists information about files opened by processes.
An open file may be a regular file, a directory, a block
special file, a character special file, an executing text
reference, a library, a stream, or a network file (Internet
socket, NFS file, or UNIX domain socket.) A specific file
or all the files in a file system may be selected by path.
</p>
-Des:
##----------------------------------------
=Pkg: ltrace 0.4 27 i586
=Sum: Trace the Library and System Calls a Program Makes
+Des:
<!-- DT:Rich -->
<p>Ltrace is a program that runs the specified command until it exits.
It intercepts and records the dynamic library calls that are called by
the executed process and the signals that are received by that process.
It can also intercept and print the system calls executed by the program.
</p><p>
The program to trace need not be recompiled for this, so you can
use ltrace on binaries for which you do not have access to the source.
</p><p>
This is still a work in progress, so, for example, the tracking to child processes
may fail or some things may not work as expected.
</p>
-Des:
##----------------------------------------
=Pkg: ltris 1.0.10 42 i586
=Sum: Tetris Clone with Multiplayer and CPU Opponents
+Des:
<!-- DT:Rich -->
<p>LTris is a very polished Tetris clone. It is highly configurable due to its menu.
It offers the well-known game type Classic, a funny game type Figures (a new figure each level, suddenly appearing tiles and lines), and multiplayer with up to three players either human or CPU controlled.
</p>
-Des:
##----------------------------------------
=Pkg: ltxml 1.2.7 34 i586
=Sum: LT XML: An Integrated Set of XML Tools
+Des:
<!-- DT:Rich -->
<p>LT XML is an integrated set of XML tools and a developers' tool kit,
including a C-based API.
</p><p>
</p><p>
The LT XML tool kit includes stand-alone tools for a wide range of
processing of well-formed XML documents, including searching and
extracting, down-translation (for example, report generation, formatting),
tokenizing and sorting.
</p><p>
</p><p>
For special purposes beyond what the pre-constructed tools can achieve,
extending their functionality and/or creating new tools is easy using
the LT XML API. Minimal applications require less than one-half page of
C code to express.
</p><p>
</p><p>
LT XML provides two views of an XML file; one as a flat stream of markup
elements and text; a second as a sequence of tree-structured XML
elements. The two views can be mixed, allowing great flexibility in the
manipulation of XML documents. It also includes a powerful, yet simple,
querying language, which allows the user to quickly and easily select
those parts of an XML document which are of interest.
</p>
-Des:
##----------------------------------------
=Pkg: lua 5.1.1 20 i586
=Sum: Small Embeddable Language with Simple Procedural Syntax
+Des:
<!-- DT:Rich -->
<p>Lua is a programming language originally designed for extending applications, but also frequently used as a general-purpose, stand-alone language.
</p><p>
Lua combines simple procedural syntax (similar to Pascal) with powerful data description constructs based on associative arrays and extensible semantics. Lua is dynamically typed, interpreted from byte codes, and has automatic memory management, making it ideal for configuration, scripting, and rapid prototyping. Lua is implemented as a small library of C functions, written in ANSI C, and the implementation goals are simplicity, efficiency, portability, and low embedding cost.
</p>
-Des:
##----------------------------------------
=Pkg: lua-devel 5.1.1 20 i586
=Sum: Development files for lua
+Des:
<!-- DT:Rich -->
<p>Lua is a programming language originally designed for extending applications, but also frequently used as a general-purpose, stand-alone language.
</p><p>
This package contains files needed for embedding lua into your application.
</p>
-Des:
##----------------------------------------
=Pkg: lua-libs 5.1.1 20 i586
=Sum: Small Embeddable Language with Simple Procedural Syntax
+Des:
<!-- DT:Rich -->
<p>Lua is a programming language originally designed for extending applications, but also frequently used as a general-purpose, stand-alone language.
</p><p>
Lua combines simple procedural syntax (similar to Pascal) with powerful data description constructs based on associative arrays and extensible semantics. Lua is dynamically typed, interpreted from byte codes, and has automatic memory management, making it ideal for configuration, scripting, and rapid prototyping. Lua is implemented as a small library of C functions, written in ANSI C, and the implementation goals are simplicity, efficiency, portability, and low embedding cost.
</p>
-Des:
##----------------------------------------
=Pkg: lukemftp 1.5 617 i586
=Sum: Enhanced FTP Client
+Des:
<!-- DT:Rich -->
<p>lukemftp is the enhanced FTP client in NetBSD.
</p>
-Des:
##----------------------------------------
=Pkg: lv 4.51 20 i586
=Sum: Powerful, Multilingual File Viewer, Same User Interface as "Less"
+Des:
<!-- DT:Rich -->
<p>Lv is a powerful, multilingual file viewer. Apparently, lv looks like
less (1), a representative file viewer on UNIX, so UNIX
people (and less people on other OSs) do not have to learn a burdensome
new interface.
</p><p>
</p><p>
Lv can decode and encode multilingual streams through many coding
systems. Lv can be used as a coding system translation filter.
</p><p>
</p><p>
Lv can recognize multibyte patterns as regular expressions, and
provides multilingual grep (1) functionality under the name
lgrep.
</p><p>
</p><p>
Lv can recognize ANSI escape sequences for text decoration.
</p>
-Des:
##----------------------------------------
=Pkg: lvm2 2.02.13 10 i586
=Sum: LVM2 Tools
+Des:
<!-- DT:Rich -->
<p>Programs and man pages for configuring and using the LVM2 Logical Volume Manager.
</p>
-Des:
##----------------------------------------
=Pkg: lynx 2.8.6_rel2 17 i586
=Sum: A Text-Based WWW Browser
+Des:
<!-- DT:Rich -->
<p>Lynx is an easy-to-use browser for HTML documents and other Internet
services like FTP, telnet, and news. Lynx is fast. It is purely text based
and therefore makes it possible to use WWW resources on text terminals.
</p>
-Des:
##----------------------------------------
=Pkg: lyx 1.4.2 27 i586
=Sum: LaTeX-Based WYSIWYG Editor
+Des:
<!-- DT:Rich -->
<p>LyX is a front-end for LaTeX under X11. It combines the comfortable use
of a word processor with the high quality of LaTeX typesetting.
Documents are displayed in a WYSIWYG-like way.
User does not choose low level attributes ("large italic") but high level
layouts (styles) for each paragraph. Of course, low level formatting is
still possible.
</p>
-Des:
##----------------------------------------
=Pkg: lzo 2.02 31 i586
=Sum: A Real-Time Data Compression Library
+Des:
<!-- DT:Rich -->
<p>LZO is a portable lossless data compression library written in ANSI C. It offers pretty fast compression and very fast decompression. Decompression requires no memory.
LZO is suitable for data compression and decompression in real-time. This means it favors speed over compression ratio.
</p>
-Des:
##----------------------------------------
=Pkg: lzo-devel 2.02 31 i586
=Sum: a real-time data compression library
+Des:
<!-- DT:Rich -->
<p>LZO is a portable lossless data compression library written in ANSI C. It offers pretty fast compression and very fast decompression. Decompression requires no memory.
LZO is suitable for data de-/compression in real-time. This means it favours speed over compression ratio.
</p>
-Des:
##----------------------------------------
=Pkg: m17n-db 1.3.3.20060828 19 i586
=Sum: m17n Database Needed by the m17n Library m17n-lib
+Des:
<!-- DT:Rich -->
<p>m17n database that is needed by the m17n library "m17n-lib".
</p>
-Des:
##----------------------------------------
=Pkg: m17n-lib 1.3.3.20060828 26 i586
=Sum: Multilingual Text Processing Library for the C Language
+Des:
<!-- DT:Rich -->
<p>A multilingual text processing library for the C language.
</p>
-Des:
##----------------------------------------
=Pkg: m17n-lib-devel 1.3.3.20060828 26 i586
=Sum: multilingual text processing library for the C language
+Des:
<!-- DT:Rich -->
<p>A multilingual text processing library for the C language
</p>
-Des:
##----------------------------------------
=Pkg: m4 1.4.6 19 i586
=Sum: GNU m4
+Des:
<!-- DT:Rich -->
<p>GNU m4 is an implementation of the traditional Unix macro
processor.
</p>
-Des:
##----------------------------------------
=Pkg: mDNSResponder 107.5 32 i586
=Sum: Multicast DNS Services (Apple Rendezvous)
+Des:
<!-- DT:Rich -->
<p>Network service registration and discovery service.
</p>
-Des:
##----------------------------------------
=Pkg: mDNSResponder-devel 107.5 27 i586
=Sum: Multicast DNS services (Apple Rendezvous)
+Des:
<!-- DT:Rich -->
<p>Network service registration and discovery service.
</p>
-Des:
##----------------------------------------
=Pkg: mDNSResponder-lib 107.5 27 i586
=Sum: Multicast DNS Services (Apple Rendezvous)
+Des:
<!-- DT:Rich -->
<p>Network service registration and discovery service.
</p>
-Des:
##----------------------------------------
=Pkg: madbomber 0.2.5 313 i586
=Sum: A Clone of the Atari Game Kaboom!
+Des:
<!-- DT:Rich -->
<p>Mad Bomber is a clone of Activision's classic Atari 2600 console
game, Kaboom!, by Larry Kaplan. It has spruced-up graphics,
sound effects, and music.
</p>
-Des:
##----------------------------------------
=Pkg: mailman 2.1.9 17 i586
=Sum: The GNU Mailing List Manager
+Des:
<!-- DT:Rich -->
<p>This is the GNU Mailing List manager. Mailman provides an easy-to-configure means of maintaining mailing lists including Web administration. Mailman is written in Python.
</p>
-Des:
##----------------------------------------
=Pkg: mailx 12.1 24 i586
=Sum: A MIME-Capable Implementation of the mailx Command
+Des:
<!-- DT:Rich -->
<p>Nail is a mail user agent derived from Berkeley Mail 8.1. It is intended to provide the functionality of the POSIX.2 mailx command with additional support for MIME messages, POP3, and SMTP. In recent system environments, nail is Unicode/UTF-8 capable. Further, it contains some minor enhancements like the ability to set a "From:" address.
</p>
-Des:
##----------------------------------------
=Pkg: make 3.81 23 i586
=Sum: GNU make
+Del:
<!-- DT:Rich -->
<p>make is needed in a number of system services for issuing commands if configuration or data files have changed. Uninstalling this small utility may result in strange effects that are hard to track down.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>The GNU make command with extensive documentation.
</p>
-Des:
##----------------------------------------
=Pkg: man 2.4.3 26 i586
=Sum: A Program for Displaying man Pages
+Des:
<!-- DT:Rich -->
<p>A program for displaying man pages on the screen or sending them
to a printer (using groff).
</p>
-Des:
##----------------------------------------
=Pkg: master-boot-code 1.6 35 i586
=Sum: i386 Master Boot Record Code
+Des:
<!-- DT:Rich -->
<p>i386 master boot code is code that, after copied to the MBR of the
boot disk, loads and starts the boot sector of the active partition.
</p>
-Des:
##----------------------------------------
=Pkg: mc 4.6.1 56 i586
=Sum: Midnight Commander
+Des:
<!-- DT:Rich -->
<p>Midnight Commander is a Norton Commander clone, a program that
manipulates and manages files and directories. It is useful, fast, and has
color display on the Linux console. It also has mouse support if you run
the gpm mouse server. This program requires the terminal description
files in /usr/lib/terminfo, which are found in ncurses.rpm (the essential
ones) or terminfo.rpm (the rest).
</p><p>
You can also use Midnight Commander under the X Window System with your mouse.
If you enter 'mc -c', colors are used.
</p><p>
In Midnight Commander, the screen is divided into four sections:
The majority of the screen is covered by two directory panels.
The second to last line on the screen is the shell command line. The last line
displays the function key assignments. At the very top, the menu list is
shown. One of the directories displayed is the current working directory.
This is where most of the commands are found. For certain commands, like
copy and move, the second directory is used as the target directory.
</p>
-Des:
##----------------------------------------
=Pkg: mdadm 2.5.3 17 i586
=Sum: Utility for Configuring MD Setup
+Des:
<!-- DT:Rich -->
<p>Mdadm is a program that can be used to control Linux md devices.
It is intended to provide all the functionality of the mdtools and
raidtools programs but with a very different interface.
</p>
-Des:
##----------------------------------------
=Pkg: meanwhile 0.4.2 32 i586
=Sum: Lotus Sametime Community Client Library
+Des:
<!-- DT:Rich -->
<p>Library to establish instant messaging connections to the Lotus Sametime IM server.
</p><p>
This library can be used with kopete.
</p>
-Des:
##----------------------------------------
=Pkg: meanwhile-devel 0.4.2 32 i586
=Sum: Lotus Sametime Community Client library
+Des:
<!-- DT:Rich -->
<p>Library to establish instant messaging connections to the Lotus Sametime IM server.
</p><p>
This library can be used with kopete.
</p>
-Des:
##----------------------------------------
=Pkg: memtest86+ 1.65 3 i586
=Sum: Memory Testing Image for x86 Architecture
+Des:
<!-- DT:Rich -->
<p>Memtest86 is an image that can be booted instead of a real OS.
Once booted, it can be used to test the computer's memory.
<p>Mergeant is a database admin tool that works with libgnomedb and libgda.
</p>
-Des:
##----------------------------------------
=Pkg: metacity 2.16.3 19 i586
=Sum: A Fast Window Manager for the GNOME 2.x Desktop
+Des:
<!-- DT:Rich -->
<p>Metacity is a fast window manager for the GNOME 2.x Desktop. It can be seen as an alternative to Sawfish. Many users prefer Metacity because it integrates well with the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: metamail 2.7.19 1070 i586
=Sum: MIME Mail Handler
+Des:
<!-- DT:Rich -->
<p>Metamail is required for reading multimedia mail messages (such as
those using the Andrew toolkit) with elm.
</p>
-Des:
##----------------------------------------
=Pkg: meterbridge 0.9.2 274 i586
=Sum: A Meterbridge for the JACK Audio System
+Des:
<!-- DT:Rich -->
<p>Meterbridge is a JACK (JACK Audio Connection Kit) client for
visualizing audio signals.
</p>
-Des:
##----------------------------------------
=Pkg: mftrace 1.2.5 13 i586
=Sum: Scalable PostScript Fonts for MetaFont
+Des:
<!-- DT:Rich -->
<p>Mftrace is a small Python program that lets you trace a TeX bitmap font into a
PFA or PFB font (A PostScript Type1 Scalable Font) or TTF (TrueType) font.
</p>
-Des:
##----------------------------------------
=Pkg: mgetty 1.1.33 37 i586
=Sum: Mgetty Listens for Data, Fax, or Voice Calls on a Serial Line
+Des:
<!-- DT:Rich -->
<p>This package turns your computer into a fax machine.
With some voice modems (Zyxel, Rockwell, and USR), you can even use your
computer as an answering machine.
</p><p>
Mgetty recognizes what kind of call it is receiving and does
everything else automatically.
It is able to accept data (login/PPP), fax, and (depending
on your modem) voice calls.
Find the documentation in /usr/share/doc/packages/mgetty
and TeX Info files in /usr/share/info.
</p><p>
The configuration files are in /etc/mgetty+sendfax.
</p>
-Des:
##----------------------------------------
=Pkg: mgp 1.11b 42 i586
=Sum: MagicPoint, an X Window System Presentation Tool
+Des:
<!-- DT:Rich -->
<p>MagicPoint is an X Window System presentation tool. It is designed to make
simple presentations easy while making complicated presentations
possible. Its presentation file (the suffix is typically .mgp) is
plain text so that you can create presentation files quickly with your
favorite editor (Emacs, for example). The package also includes the tools mgp2html,
mgp2ps, and mgp2latex, which convert mgp presentations into other file formats.
</p>
-Des:
##----------------------------------------
=Pkg: mhash 0.9.4a 33 i586
=Sum: A Library for Working with Strong Hashes (Like MD5)
+Des:
<!-- DT:Rich -->
<p>The mhash library provides an easy way to access strong hashes,
such as MD5, SHA1, and other algorithms.
</p>
-Des:
##----------------------------------------
=Pkg: microcode_ctl 1.15 8 i586
=Sum: Microcode Updates for Intel CPUs
+Des:
<!-- DT:Rich -->
<p>This utility allows updating the microcode of Intel x86 and x86-64 CPUs.
This feature is supported by Pentium II and newer CPUs.
</p>
-Des:
##----------------------------------------
=Pkg: mined 2000.13.1 12 i586
=Sum: Powerful Text Editor with Extensive Unicode and CJK Support
+Des:
<!-- DT:Rich -->
<p>Mined is a powerful text editor with a comprehensive and easy-to-use
user interface and fast, small-footprint behavior.
</p><p>
It was the first editor that provided Unicode support in a
plain-text terminal.
It now has both extensive Unicode and CJK support offering many
specific features and covering special cases that other editors
are not aware of (like autodetection features and automatic handling
of terminal variations or Han character information).
Basically, it is an editor tailored to efficient editing
of plain text documents and programs with features and interactive
behavior designed for this purpose.
</p><p>
</p><p>
Mined Overview
</p><p>
Good interactive features<ul>
<li>Intuitive user interface
</li><li>Logical and consistent concept of navigating and editing text
(without ancient line-end handling limitations or insert or append confusion)
</li><li>Supports various control styles:
Editing with command control, function key control, or menu control
Navigation by cursor keys, control keys, mouse or scrollbar
</li><li>Comprehensive menus (driven by keyboard or mouse)
</li><li>"HOP" key paradigm doubles the number of navigation functions
that can be most easily reached and remembered by
intuitively amplifying the associated function
</li><li>Immediate adjustment if the window size is changed in any
state of interaction
</li></ul>
Versatile character encoding support<ul>
<li>Extensive Unicode support, including double-width and combining characters,
script highlighting,
various methods of character input support
(mapped keyboard input methods, mnemonic and numeric input),
supporting CJK, Vietnamese, Hebrew, Arabic, and other scripts
</li><li>Support of bidirectional terminals, Arabic ligature joining
</li><li>East Asian character set support: handling of major CJK encodings
(including GB18030 and full EUC-JP with combining characters)
in either Unicode terminal or CJK terminal
</li><li>Support for a variety of 8-bit encodings (mapped to Unicode)
(with combining characters for Vietnamese and Thai)
</li><li>Support of CJK input methods by enhanced keyboard
mapping including multiple choice mappings (handled by a pick list menu);
characters in the pick list being sorted by relevance of Unicode ranges
</li><li>Han character information with description and pronunciation
</li><li>Autodetection of text character encoding, edit of files with
mixed character encoding sections (such as mailboxes),
transparent handling of UTF-16 encoded files
</li><li>Autodetection of UTF-8 and CJK terminal mode and detailed features
(like different Unicode width and combining data versions)
</li><li>Encoding support tested with:
xterm, mlterm, hanterm, cxterm, rxvt, linux console
</li></ul>
Many useful text editing capabilities<ul>
<li>Many text editing features, such as paragraph wrapping,
autoindentation and back-tab,
smart quotes (with quotation marks style selection and autodetection),
and smart dashes
</li><li>Search and replacement patterns can have multiple lines
</li><li>Cross-session paste buffer (copy and paste between
multiple--even subsequent or remote--invocations of mined)
</li><li>Marker stack for quick return to previous text positions
</li><li>Multiple paste buffers (emacs-style)
</li><li>Program editing features, HTML support and syntax highlighting,
identifier and function definition search, also across files;
structure input support
</li><li>Text and program layout features; autoindentation and
undent function (back-tab), numbered item justification
</li><li>Systematic text and file handling safety, avoiding loss of data
</li><li>Visible indications of special text contents
(TAB characters, different line-end types, character
codes that cannot be displayed in the current mode)
</li><li>Full binary transparent editing with visible indications
(illegal UTF-8 or CJK, mixed line end types, NUL characters, etc.)
</li><li>Print function that works in all text encodings
</li><li>Optional emacs command mode
</li></ul>
Small-footprint operation and portability<ul>
<li>Plain text mode (terminal) operation, supporting wide range of terminals
</li><li>Instant start-up
</li><li>Runs on many platforms: Unix (Linux/Sun/HP/BSD/Mac and more),
DOS (djgpp), Windows (cygwin)
</li><li>Makefiles also support legacy systems
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: mingetty 0.9.6s 107 i586
=Sum: Minimal Getty for Virtual Consoles Only
+Des:
<!-- DT:Rich -->
<p>The mingetty program is a lightweight, minimalist getty program for
use only on virtual consoles. Mingetty is not suitable for serial
lines (you should use the mgetty program for this purpose).
</p>
-Des:
##----------------------------------------
=Pkg: minicom 2.2 12 i586
=Sum: A Terminal Program
+Des:
<!-- DT:Rich -->
<p>A terminal program similar to Telix(tm) (a program for calling other
computers via modem) under MS-DOS.
</p><p>
If you want to access your modem with minicom, you have to be a member of the
uucp group.
</p>
-Des:
##----------------------------------------
=Pkg: mirror 2.9 783 i586
=Sum: Perl Scripts for Mirroring FTP Servers
+Des:
<!-- DT:Rich -->
<p>Documentation: "man mirror" and "man mm".
</p>
-Des:
##----------------------------------------
=Pkg: mjpegtools 1.8.0 38 i586
=Sum: MJPEG Video Capture and Processing Tools
+Des:
<!-- DT:Rich -->
<p>The mjpegtools allow for capture, playback, processing, and simple editing of
MJPEG AV data. The hardware I/O applications are intended for use with Zoran MJPEG framegrabber-based hardware (see the zoran-driver package), but the processing tools can be used with MJPEG data from other sources as well.
</p>
-Des:
##----------------------------------------
=Pkg: mjpegtools-devel 1.8.0 38 i586
=Sum: MJPEG Video Capture and Processing Tools
+Des:
<!-- DT:Rich -->
<p>The mjpegtools allow for capture, playback, processing, and simple editing of
MJPEG AV data. The hardware I/O applications are intended for use with Zoran MJPEG framegrabber-based hardware (see the zoran-driver package), but the processing tools can be used with MJPEG data from other sources as well.
</p>
-Des:
##----------------------------------------
=Pkg: mkinitrd 1.2 149 i586
=Sum: Creates an Initial RAM Disk Image for Preloading Modules
+Des:
<!-- DT:Rich -->
<p>Mkinitrd creates file system images for use as initial RAM disk (initrd)
images. These RAM disk images are often used to preload the block
device modules (SCSI or RAID) needed to access the root file system.
</p><p>
In other words, generic kernels can be built without drivers for any
SCSI adapters that load the SCSI driver as a module. Because the
kernel needs to read those modules, but in this case is not able to
address the SCSI adapter, an initial RAM disk is used. The initial
RAM disk is loaded by the operating system loader (normally LILO) and
is available to the kernel as soon as the RAM disk is loaded. The
RAM disk loads the proper SCSI adapter and allows the kernel to
mount the root file system.
</p>
-Des:
##----------------------------------------
=Pkg: mkisofs cdrkit.1.0pre5 6 i586
=Sum: A program for creating CDs in Linux
+Des:
<!-- DT:Rich -->
<p>Mkisofs is a pre-mastering program that generates
an iso9660 filesystem . It takes a snapshot of a given
directory tree, and generates a binary image
which
corresponds to an iso9660 filesystem that can be written to a
block device.
</p>
-Des:
##----------------------------------------
=Pkg: mknbi 1.4.4 34 i586
=Sum: MaKe NetBoot Image for Linux
+Des:
<!-- DT:Rich -->
<p>MaKe NetBoot Image for Linux.
</p>
-Des:
##----------------------------------------
=Pkg: mktemp 1.5 763 i586
=Sum: A Utility for Temp Files
+Des:
<!-- DT:Rich -->
<p>mktemp is a small utility that interfaces to the mktemp() function
call to allow shell scripts and other programs to use files in /tmp
safely.
</p>
-Des:
##----------------------------------------
=Pkg: mlmmj 1.2.12 4 i586
=Sum: Mail Server Independent Reimplementation of the EZMLM Mailing List
+Des:
<!-- DT:Rich -->
<p>This is an attempt at implementing a mailing list manager with the same
functionality as EZMLM, but with the MIT/X11 license and no mail server
dependency.
</p>
-Des:
##----------------------------------------
=Pkg: mlterm 2.9.3 30 i586
=Sum: Multilingual Terminal Emulator for X
+Des:
<!-- DT:Rich -->
<p>Mlterm is a multilingual terminal emulator for the X Window System.
character composition: TIS620, TCVN5712, JISX0213, UNICODE
</p><p>
Multiple xims are also supported and you can dynamically change various xims.
</p><p>
Other features:
<ul>
<li>scroll by wheel mouse
</li><li>antialias font (requires Xft and Xrender extensions)
</li><li>proportional font
</li><li>transparent background
</li><li>background image (requires Imlib)
</li><li>multiple pty windows
</li><li>scrollbar plug-in API (unstable)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: mm 1.4.2 20 i586
=Sum: Shared Memory Library
+Des:
<!-- DT:Rich -->
<p>The MM library is a 2-layer abstraction library that simplifies the
usage of shared memory between forked (and this way strongly related)
processes under Unix platforms. On the first layer, it hides all
platform-dependent implementation details (allocation and locking)
when dealing with shared memory segments and on the second layer it
provides a high-level malloc(3)-style API for a convenient and
well-known way to work with data structures inside those shared memory
segments.
</p>
-Des:
##----------------------------------------
=Pkg: mmv 1.01b 826 i586
=Sum: Multiple Move
+Des:
<!-- DT:Rich -->
<p>Perform tasks like mmv "*.c" "#1.c.old".
</p>
-Des:
##----------------------------------------
=Pkg: module-init-tools 3.2.2 62 i586
=Sum: Utilities to Load Modules into the Kernel
+Del:
<!-- DT:Rich -->
<p>These utilities are required if you are using a modularized
kernel. Only remove this package if you know exactly what
you are doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Utilities for loading kernel modules. Included are
'insmod', 'lsmod', 'rmmod', 'depmod', and 'modprobe'. The
configuration file /etc/modutils.conf can be used to pass
parameters to the modules. 'depmod' should be used after
compiling a new kernel to generate the dependency information.
'insmod' does not use the dependency nor the
options file. Therefore, 'modprobe' is normally used to
load a module.
</p>
-Des:
##----------------------------------------
=Pkg: moneyplex 2006 6 i586
=Sum: Home Banking Software That Supports HBCI (German Only)
+Des:
<!-- DT:Rich -->
<p>This is a light version of the home banking software from Matrica.
It supports smart card readers (currently Kobil Standard, Kobil Pro, and
Cyberjack), online banking through HBCI, PIN/TAN transactions, and
security media that some banks support.
</p><p>
Moneyplex is only available in German.
</p>
-Des:
##----------------------------------------
=Pkg: mono-core 1.1.18.1 12 i586
=Sum: A .NET Runtime Environment
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data 1.1.18.1 12 i586
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-firebird 1.1.18.1 12 i586
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to
develop an open source, Unix version of the .NET development platform.
Its objective is to enable Unix developers to build and deploy
cross-platform .NET applications. The project will implement various
technologies that have been submitted to the ECMA for standardization.
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-oracle 1.1.18.1 12 i586
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-postgresql 1.1.18.1 12 i586
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-sqlite 1.1.18.1 12 i586
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-sybase 1.1.18.1 12 i586
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-debugger 0.31 5 i586
=Sum: Mono Debugger
+Des:
<!-- DT:Rich -->
<p>A debugger is an important tool for development. The Mono Debugger (MDB) can debug both managed and unmanaged applications. It provides a reusable library that can be used to add debugger functionality to different front-ends. The debugger package includes a console debugger named "mdb", and MonoDevelop (http://www.monodevelop.com) provides a GUI interface to the debugger.
</p>
-Des:
##----------------------------------------
=Pkg: mono-devel 1.1.18.1 12 i586
=Sum: Mono development tools
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications.
This package contains compilers and other tools needed to develop .NET applications.
</p><p>
Mono development tools.
</p>
-Des:
##----------------------------------------
=Pkg: mono-extras 1.1.18.1 12 i586
=Sum: Extra packages
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Extra packages.
</p>
-Des:
##----------------------------------------
=Pkg: mono-jscript 1.1.18.1 12 i586
=Sum: JScript .NET support for Mono
+Des:
<!-- DT:Rich -->
<p>This package contains the JScript .NET compiler and language
runtime. This allows you to compile and run JScript.NET application
and assemblies.
</p>
-Des:
##----------------------------------------
=Pkg: mono-locale-extras 1.1.18.1 12 i586
=Sum: Extra locale information
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Extra locale information.
</p>
-Des:
##----------------------------------------
=Pkg: mono-nunit 1.1.18.1 12 i586
=Sum: NUnit Testing Framework
+Des:
<!-- DT:Rich -->
<p>NUnit is a unit-testing framework for all .Net languages. Initially ported from JUnit, the current release, version 2.2, is the fourth major release of this Unit based unit testing tool for Microsoft .NET. It is written entirely in C# and has been completely redesigned to take advantage of many .NET language features, for example custom attributes and other reflection related capabilities. NUnit brings xUnit to all .NET languages.
</p>
-Des:
##----------------------------------------
=Pkg: mono-web 1.1.18.1 12 i586
=Sum: Mono implementation of ASP.NET, Remoting and Web Services
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Mono implementation of ASP.NET, Remoting and Web Services.
</p>
-Des:
##----------------------------------------
=Pkg: mono-winforms 1.1.18.1 12 i586
=Sum: Mono's Windows Forms implementation
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Mono's Windows Forms implementation.
</p>
-Des:
##----------------------------------------
=Pkg: motv 3.95 25 i586
=Sum: Video4Linux TV application (Motif)
+Des:
<!-- DT:Rich -->
<p>motv is a X11 application for watching TV with your Linux box. It
supports video4linux devices (for example bttv cards, various USB
webcams, ...). It's based on xawtv's code, but uses Motif to provide a
better GUI.
</p><p>
Also includes the teletext/videotext viewer mtt.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nspr 4.6.3 10 i586
=Sum: Netscape Portable Runtime
+Des:
<!-- DT:Rich -->
<p>NSPR provides platform independence for non-GUI operating system facilities. These facilities include threads, thread synchronization, normal file and network I/O, interval timing and calendar time, basic memory management (malloc and free), and shared library linking.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nspr-devel 4.6.3 10 i586
=Sum: Netscape Portable Runtime development files
+Des:
<!-- DT:Rich -->
<p>NSPR provides platform independence for non-GUI operating system facilities. These facilities include threads, thread synchronization, normal file and network I/O, interval timing and calendar time, basic memory management (malloc and free), and shared library linking.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nss 3.11.3 10 i586
=Sum: Network (Netscape) Security Services
+Des:
<!-- DT:Rich -->
<p>Network Security Services (NSS) is a set of libraries designed to support cross-platform development of security-enabled server applications. Applications built with NSS can support SSL v2 and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509 v3 certificates, and other security standards.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nss-tools 3.11.3 10 i586
=Sum: Tools for developing, debugging, and managing applications that use NSS.
+Des:
<!-- DT:Rich -->
<p>The NSS Security Tools allow developers to test, debug, and manage applications that use NSS.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner181 1.8.0.99 38 i586
=Sum: Mozilla Runtime Environment 1.8.1.x
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap multiple XUL+XPCOM applications that are as rich as Firefox and Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: mrtg 2.14.7 19 i586
=Sum: The Multirouter Traffic Grapher
+Des:
<!-- DT:Rich -->
<p></p><p>
A tool to visualize network traffic via a Web page.
</p>
-Des:
##----------------------------------------
=Pkg: msynctool 0.20 7 i586
=Sum: CLI for synchronization with OpenSync
+Des:
<!-- DT:Rich -->
<p>Command line interface for libopensync to allow synchronization on machines which lack a X server. It relies on the OpenSync framework to do the actual synchronization. You need to install the libopensync package and the plugins for it, too.
</p>
-Des:
##----------------------------------------
=Pkg: mtools 3.9.10 38 i586
=Sum: Access Files on an MS-DOS File System
+Des:
<!-- DT:Rich -->
<p>Mtools allows uncomplicated access to an MS-DOS file system on disk without mounting it. It includes commands for working with MS-DOS files: mdir, mcd, mcopy, and mformat.
</p><p>
XDF support for OS/2 is also provided.
</p>
-Des:
##----------------------------------------
=Pkg: mtr 0.72 18 i586
=Sum: Ping and Traceroute Network Diagnostic Tool
+Des:
<!-- DT:Rich -->
<p>Mtr is a network diagnostic tool that combines Ping and
Traceroute into one program.
This package contains the mtr version with an ncurses interface, in other words, the text
mode version is usable in a shell (telnet or SSH session, for example).
</p><p>
Find the graphical version in the mtr-gtk package.
</p>
-Des:
##----------------------------------------
=Pkg: multipath-tools 0.4.7 29 i586
=Sum: Tools to Manage Multipathed Devices with the device-mapper
+Des:
<!-- DT:Rich -->
<p>This package provides the tools to manage multipathed devices by
instructing the device-mapper multipath module what to do. The tools are:
<ul>
<li>multipath:
scans the system for multipathed devices, assembles them, and updates the device-mapper's maps
</li><li>multipathd:
waits for maps events then execs multipath
</li><li>devmap-name:
provides a meaningful device name to udev for devmaps
</li><li>kpartx:
maps linear devmaps to device partitions, which makes multipath maps partionable
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: multisync-gui 0.91.0 9 i586
=Sum: GUI for synchronization with OpenSync
+Des:
<!-- DT:Rich -->
<p>Graphical version of MultiSync for the libopensync package. To allow synchronization on machines which use a X server. It relies on the OpenSync framework to do the actual synchronization. You need to install the libopensync package and the plugins for it, too. This package is independent from the various multisync-* packages which will be obsoleted once OpenSync has left the beta phase.
</p>
-Des:
##----------------------------------------
=Pkg: muse 0.8.1 25 i586
=Sum: MIDI Music Editor
+Des:
<!-- DT:Rich -->
<p>MusE is a MIDI sequencer with recording and editing capabilities.
It is fully multithreaded with a Qt GUI.
</p>
-Des:
##----------------------------------------
=Pkg: musictex T.99 871 i586
=Sum: MusiXTeX
+Des:
<!-- DT:Rich -->
<p>This packages is only usable for TeX experts with musical ambitions.
It contains a music TeX format file musixtex for direct usage onto TeX music
files.
LaTeX users should use the corresponding style file. For a description,
look under /usr/share/texmf/doc/musixtex/.
</p>
-Des:
##----------------------------------------
=Pkg: mutt 1.5.13 32 i586
=Sum: Mail Program
+Des:
<!-- DT:Rich -->
<p>A very powerful mail user agent.
It supports (among other nice things) highlighting, threading, and PGP.
It takes some time to get used to, however.
</p>
-Des:
##----------------------------------------
=Pkg: mwavem 2.0 32 i586
=Sum: IBM ThinkPad 600 and 770 ACP Modem Driver
+Des:
<!-- DT:Rich -->
<p>This package contains a daemon to use an ACP modem on an IBM ThinkPad 600
or 700.
</p>
-Des:
##----------------------------------------
=Pkg: myldapklient 0.6.6 353 i586
=Sum: An LDAP Client
+Des:
<!-- DT:Rich -->
<p>A client for LDAP servers. Address data can be added into the KDE address book with this program.
</p>
-Des:
##----------------------------------------
=Pkg: mysql 5.0.26 12 i586
=Sum: A True Multiuser, Multithreaded SQL Database Server
+Des:
<!-- DT:Rich -->
<p>SQL is the most popular database language in the world. MySQL is a
client/server implementation that consists of a server daemon (mysqld)
and many different client programs and libraries.
</p><p>
The main goals of MySQL are speed, robustness, and ease of use. MySQL
was originally developed because the developers at TcX needed an SQL
server that could handle very large databases an order of magnitude
faster than what any database vendor could offer them. They have now
been using MySQL since 1996 in an environment with more than 40 databases
containing 10,000 tables, of which more than 500 have more than 7 million
rows. This is about 100 gigabytes of mission-critical data.
</p><p>
The base upon which MySQL is built is a set of routines that have been
used in a highly demanding production environment for many years. While
MySQL is still in development, it already offers a rich and highly useful
function set.
</p><p>
The official way to pronounce MySQL is "My Ess Que Ell" (Not MY-SEQUEL).
</p><p>
This package only contains the server-side programs.
</p>
-Des:
##----------------------------------------
=Pkg: mysql-client 5.0.26 12 i586
=Sum: MySQL Client
+Des:
<!-- DT:Rich -->
<p>This package contains the standard MySQL clients.
</p>
-Des:
##----------------------------------------
=Pkg: mysql-devel 5.0.26 12 i586
=Sum: MySQL Development Header Files and Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the development header files and libraries necessary
to develop MySQL client applications.
</p>
-Des:
##----------------------------------------
=Pkg: mysql-shared 5.0.26 12 i586
=Sum: MySQL Shared Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the shared libraries (.so) which certain
languages and applications need to dynamically load and use MySQL.
</p>
-Des:
##----------------------------------------
=Pkg: nabi 0.15 25 i586
=Sum: Korean IMS (Input Method System) Nabi
+Des:
<!-- DT:Rich -->
<p>Korean IMS (Input Method System) Nabi.
</p>
-Des:
##----------------------------------------
=Pkg: namazu 2.0.14 33 i586
=Sum: A Full-Text Search Engine
+Des:
<!-- DT:Rich -->
<p>Namazu is a full-text search engine software intended for easy use.
It works not only as a CGI program for small or medium scale WWW
search engines, but also works for personal use such as a search system
for the local hard disk.
</p>
-Des:
##----------------------------------------
=Pkg: namazu-cgi 2.0.14 33 i586
=Sum: a CGI interface for Namazu
+Des:
<!-- DT:Rich -->
<p>a CGI interface for Namazu
</p>
-Des:
##----------------------------------------
=Pkg: namazu-devel 2.0.14 33 i586
=Sum: header files and libraries of Namazu
+Des:
<!-- DT:Rich -->
<p>header files and libraries of Namazu
</p>
-Des:
##----------------------------------------
=Pkg: nano 1.3.12 20 i586
=Sum: Pico Editor Clone with Enhancements
+Des:
<!-- DT:Rich -->
<p>GNU nano is a small and friendly text editor. It aims to emulate the Pico text editor while also offering a few enhancements.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus 2.16.1 32 i586
=Sum: The GNOME 2.x Desktop File Manager
+Des:
<!-- DT:Rich -->
<p>This package contains Nautilus, the advanced file manager for the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-cd-burner 2.16.1 27 i586
=Sum: CD Burning Extension for Nautilus
+Des:
<!-- DT:Rich -->
<p>Nautilus-cd-burner is an extension to Nautilus that makes it easy to
write files to a CD burner.
</p><p>
The user uses Nautilus or another Gnome-VFS aware application to copy the
files to write to "burn:///" then Nautilus-cd-burner is
launched to write the files to the CD.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-cd-burner-devel 2.16.1 27 i586
=Sum: CD-Burning Extension for Nautilus
+Des:
<!-- DT:Rich -->
<p>Nautilus-cd-burner is an extension to Nautilus that makes it easy to
write files to a CD burner.
</p><p>
The user uses Nautilus or another Gnome-VFS aware application to copy the
files he wants to write to "burn:///," and then Nautilus-cd-burner is
launched to write the files to the CD.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-devel 2.16.1 32 i586
=Sum: Development Package for Nautilus
+Des:
<!-- DT:Rich -->
<p>This package contains all files needed to develop programs that use features of the Nautilus file manager.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-open-terminal 0.7 27 i586
=Sum: Nautilus Open Terminal
+Des:
<!-- DT:Rich -->
<p>Nautilus extension that allows you to open a terminal in arbitrary local folders.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-sendto 0.7 28 i586
=Sum: Integrate Nautilus, Evolution, and Gaim
+Des:
<!-- DT:Rich -->
<p>This package provides functionality in the Nautilus file browser to send files over e-mail or instant messaging protocols via Evolution and Gaim.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-share 0.7.0 28 i586
=Sum: A Quick and Easy Way to Share Folders in Nautilus via Samba
+Des:
<!-- DT:Rich -->
<p>Application for GNOME desktop integrated in Nautilus that allows simple use of Nautilus shares without the need to be root.
</p><p>
Features:<ul>
<li>A new entry in your Nautilus right-click menu with a nice icon.
</li><li>A simple dialog to share your folder, which allows you to choose a name and decide whether to make it read-only.
</li><li>You can also access it from the Properties tab of your folder.
</li><li>You can see as you type if the share name is already used or not.
</li><li>When you share a folder, Nautilus displays a palm icon to visually show you which folders are shared.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: ncpfs 2.2.6 43 i586
=Sum: Tools for Accessing Novell File Systems
+Des:
<!-- DT:Rich -->
<p>With this program, you can mount Netware server file systems under Linux.
You can even print Linux documents on printers attached to a
Novell server.
</p>
-Des:
##----------------------------------------
=Pkg: ncurses 5.5 42 i586
=Sum: New curses Libraries
+Des:
<!-- DT:Rich -->
<p>As soon as a text application needs to directly control its output to the
screen (if it wants to place the cursor at location (x,y) then
write text), ncurses is used. The panel and the forms libraries are
included in this package. These new libraries support color, special
characters, and panels.
</p>
-Des:
##----------------------------------------
=Pkg: ncurses-devel 5.5 42 i586
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: ndiswrapper 1.25 27 i586
=Sum: Use Microsoft NDIS Network Drivers for WLAN Cards
+Ins:
<!-- DT:Rich -->
<p>No support is available for ndiswrapper based network setups, and we will not accept bug reports against the kernel if the ndiswrapper module is loaded.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Some wireless LAN vendors refuse to release hardware specifications or
drivers for their products for operating systems other than Microsoft
Windows. The ndiswrapper project makes it possible to use such
hardware with Linux by means of a loadable kernel module that "wraps
=Sum: Use Microsoft NDIS Network Drivers for WLAN Cards
+Ins:
<!-- DT:Rich -->
<p>No support is available for ndiswrapper based network setups, and we will not accept bug reports against the kernel if the ndiswrapper module is loaded.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Some wireless LAN vendors refuse to release hardware specifications or
drivers for their products for operating systems other than Microsoft
Windows. The ndiswrapper project makes it possible to use such
hardware with Linux by means of a loadable kernel module that "wraps
=Sum: Use Microsoft NDIS Network Drivers for WLAN Cards
+Ins:
<!-- DT:Rich -->
<p>No support is available for ndiswrapper based network setups, and we will not accept bug reports against the kernel if the ndiswrapper module is loaded.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Some wireless LAN vendors refuse to release hardware specifications or
drivers for their products for operating systems other than Microsoft
Windows. The ndiswrapper project makes it possible to use such
hardware with Linux by means of a loadable kernel module that "wraps
=Sum: Use Microsoft NDIS Network Drivers for WLAN Cards
+Ins:
<!-- DT:Rich -->
<p>No support is available for ndiswrapper based network setups, and we will not accept bug reports against the kernel if the ndiswrapper module is loaded.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Some wireless LAN vendors refuse to release hardware specifications or
drivers for their products for operating systems other than Microsoft
Windows. The ndiswrapper project makes it possible to use such
hardware with Linux by means of a loadable kernel module that "wraps
</li><li>WebDAV metadata support: set and remove properties, query any set of
properties (PROPPATCH/PROPFIND)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: net-snmp 5.4.rc2 4 i586
=Sum: SNMP Daemon
+Des:
<!-- DT:Rich -->
<p>This package was originally based on the CMU 2.1.2.1 snmp code.
It has been greatly modified, restructured, enhanced, and fixed.
It hardly looks the same as anything that CMU has ever released.
It was renamed from cmu-snmp to ucd-snmp in 1995 and later renamed
from ucd-snmp to net-snmp in November 2000.
</p>
-Des:
##----------------------------------------
=Pkg: net-tools 1.60 606 i586
=Sum: Important Programs for Networking
+Des:
<!-- DT:Rich -->
<p>This package contains essential programs for network administration
and maintenance: netstat, hostname, arp, ifconfig, rarp, and route.
</p>
-Des:
##----------------------------------------
=Pkg: netacct 0.71 529 i586
=Sum: Network Accounting
+Des:
<!-- DT:Rich -->
<p>This package logs network traffic. It provides a daemon (nacctd) that
logs all traffic passing through the machine it runs on (similar to what tcpdump
does).
</p>
-Des:
##----------------------------------------
=Pkg: netatalk 2.0.3 46 i586
=Sum: AppleTalk for Linux
+Des:
<!-- DT:Rich -->
<p>Netatalk is an implementation of the AppleTalk Protocol Suite for Unix and Linux systems.
The current release contains support for Ethertalk phase I and II, DDP, RTMP, NBP, ZIP, AEP, ATP, PAP, ASP, and AFP.
It provides AppleTalk file printing and routing services on Solaris 2.5, Linux, FreeBSD, SunOS 4.1, and Ultrix 4. It also supports AFP 2.1 and 2.2 (AppleShare IP).
</p>
-Des:
##----------------------------------------
=Pkg: netcat 1.10 902 i586
=Sum: A Simple But Powerful Network Tool
+Des:
<!-- DT:Rich -->
<p>Netcat is a simple Unix utility that reads and writes data across network
connections using TCP or UDP protocols. It is designed to be a reliable
back-end tool that can be used directly or easily driven by other programs
and scripts. At the same time, it is a feature-rich network debugging and
exploration tool, because it can create almost any kind of connection you
may need and has several interesting built-in capabilities.
</p><p>
Find the documentation in /usr/share/doc/packages/netcat/README.
</p>
-Des:
##----------------------------------------
=Pkg: netdate 1.2 610 i586
=Sum: Set Date and Time by ARPA Internet RFC 868
+Des:
<!-- DT:Rich -->
<p>Netdate takes a list of names of Internet hosts as arguments,
selects the one that supplies the best time, and sets the system
time accordingly.
</p><p>
The "best" time is chosen by polling the named hosts once each
to find their times and taking their differences from the local
host's time. These differences are used to find the largest group
of hosts whose times agree with each other within a certain limit.
The first host in the largest group is picked as the best host.
</p>
-Des:
##----------------------------------------
=Pkg: netdiag 20060324 19 i586
=Sum: Hardware Level Diagnostic Tool
+Des:
<!-- DT:Rich -->
<p>Enables hardware level diagnostics without booting DOS.
</p>
-Des:
##----------------------------------------
=Pkg: netpbm 10.26.22 33 i586
=Sum: A Powerful Graphics Conversion Package
+Des:
<!-- DT:Rich -->
<p>The latest version of the Portable Bitmap Plus Utilities. This large
package, which is by now available for all hardware platforms,
provides tools for graphics conversion. Using these tools, images can
be converted from virtually any format into any other format.
A few of the supported formats include: GIF, PC-Paintbrush, IFF ILBM,
Gould Scanner file, MTV ray tracer, Atari Degas .pi1 and .pi3, Macintosh
PICT, HP Paintjet file, QRT raytracer, AUTOCAD slide, Atari Spectrum
(compressed and uncompressed), Andrew Toolkit raster object, and many
more. On top of that, man pages are included for all tools.
</p>
-Des:
##----------------------------------------
=Pkg: neverball 1.4.0 48 i586
=Sum: Deftly Guide a Rolling Ball through Many Slick 3D Levels
+Des:
<!-- DT:Rich -->
<p>Guide a rolling ball through dangerous territory that
you control by tilting the floor.
Balance on narrow bridges, navigate mazes, ride
moving platforms, and dodge pushers and shovers to
get to the goal. Race against the clock to collect coins
to earn extra balls.
With nice physics and very clean and appealing 3D graphics,
this is definitely a must play.
</p>
-Des:
##----------------------------------------
=Pkg: newt 0.52.2 35 i586
=Sum: Nifty Erik's Windowing Toolkit
+Des:
<!-- DT:Rich -->
<p>Newt is a programming library for color text-mode widget-based user
interfaces. Newt can be used to add stacked windows, entry widgets,
check boxes, radio buttons, labels, plain text fields, scrollbars,
etc., to text mode user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: nfs-utils 1.0.10 22 i586
=Sum: Support Utilities for Kernel nfsd
+Des:
<!-- DT:Rich -->
<p>This package contains the NFS utilities. You can tune the number of server threads via the sysconfig variable USE_KERNEL_NFSD_NUMBER.
For quota over NFS support, install the quota package.
</p>
-Des:
##----------------------------------------
=Pkg: nfsidmap 0.16 22 i586
=Sum: NFSv4 ID Mapping Library
+Des:
<!-- DT:Rich -->
<p>In NFSv4, identities of users are conveyed by names rather than user ID
and group ID. Both the NFS server and client code in the kernel need to
translate these to numeric IDs.
</p>
-Des:
##----------------------------------------
=Pkg: nh2ps 2.3.1 549 i586
=Sum: Hangul Text to Postscript Converter
+Des:
<!-- DT:Rich -->
<p>Convert plain hangul text into postscript form.
By Choi Jun Ho, the Junker <junker@jazz.snu.ac.kr>.
</p>
-Des:
##----------------------------------------
=Pkg: nicolatter 1.7.8 36 i586
=Sum: Japanese X Input Method--Romaji-Kana, JIS Kana, and NICOLA Keyboard
+Des:
<!-- DT:Rich -->
<p>Q's Nicolatter for X is a Kana-Kanji keyboard input method server.
It provides a common operation method over X applications
that process Japanese text. It can be used with Gtk+, Qt, etc.,
applications.
</p><p>
</p><p>
It supports the Romaji-Kana, JIS Kana, and NICOLA keyboard
arrangements.
</p>
-Des:
##----------------------------------------
=Pkg: nkf 2.0.5 31 i586
=Sum: Network Kanji Code Conversion Filter
+Des:
<!-- DT:Rich -->
<p>Nkf is a yet another Kanji code converter among networks, hosts, and
terminals. It converts input Kanji code to designated Kanji code, such
as 7-bit JIS, MS-kanji (shifted-JIS) or EUC.
</p><p>
One of the most unique facility of nkf is the guess of
the input kanji code. It currently recognizes 7-bit JIS,
MS-kanji (shifted-JIS), and EUC. So users do not need the
input Kanji code specification.
</p><p>
By default, X0201 kana is converted into X0208 kana. For
X0201 kana, SO/SI, SSO and ESC-(-I methods are supported.
For automatic code detection, nkf assumes no X0201 kana in
MS-Kanji. To accept X0201 in MS-Kanji, use -X, -x, or -S.
</p>
-Des:
##----------------------------------------
=Pkg: nmap 4.11 23 i586
=Sum: Portscanner
+Des:
<!-- DT:Rich -->
<p>Nmap is designed to allow system administrators and curious individuals
to scan large networks to determine which hosts are up and what services
they are offering.
XNmap is a graphical front-end that shows nmap's output clearly.
Find documentation in /usr/share/doc/packages/nmap.
</p>
-Des:
##----------------------------------------
=Pkg: noteedit 2.8.1 16 i586
=Sum: Score Editor with Extensive MIDI and MusiXTeX Functionality
+Des:
<!-- DT:Rich -->
<p>NoteEdit is a score editor based on the MIDI library TSE3. It can read
and write MIDI files and process events sent from an external MIDI
keyboard. The configured MIDI devices can be used to
play the score. The score can be saved as a MusiXTeX file for printout.
</p>
-Des:
##----------------------------------------
=Pkg: notification-daemon 0.3.5 23 i586
=Sum: Notification Daemon
+Des:
<!-- DT:Rich -->
<p>D-BUS notification daemon.
</p>
-Des:
##----------------------------------------
=Pkg: novfs-kmp-bigsmp 2.0.0_2.6.18.2_34 3 i586
=Sum: Kernel Modules for novfs
+Des:
<!-- DT:Rich -->
<p>This package contains the Novell Client for Linux kernel module.
</p>
-Des:
##----------------------------------------
=Pkg: novfs-kmp-default 2.0.0_2.6.18.2_34 3 i586
=Sum: Kernel Modules for novfs
+Des:
<!-- DT:Rich -->
<p>This package contains the Novell Client for Linux kernel module.
</p>
-Des:
##----------------------------------------
=Pkg: novfs-kmp-xen 2.0.0_2.6.18.2_34 3 i586
=Sum: Kernel Modules for novfs
+Des:
<!-- DT:Rich -->
<p>This package contains the Novell Client for Linux kernel module.
</p>
-Des:
##----------------------------------------
=Pkg: nscd 2.5 25 i586
=Sum: Name Service Caching Daemon
+Des:
<!-- DT:Rich -->
<p>Nscd caches name service lookups and can dramatically improve
performance with NIS, NIS+, and LDAP.
</p>
-Des:
##----------------------------------------
=Pkg: nss_ldap 253 14 i586
=Sum: NSS LDAP Module
+Des:
<!-- DT:Rich -->
<p>Nss_ldap is a glibc NSS module that allows X.500 and LDAP
directory servers to be used as a primary source of aliases, ethers,
groups, hosts, networks, protocol, users, RPCs, services, and shadow
passwords (instead of or in addition to using flat files or NIS).
</p>
-Des:
##----------------------------------------
=Pkg: ntfsprogs 1.13.1 3 i586
=Sum: NTFS filesystem libraries and utilities
+Des:
<!-- DT:Rich -->
<p>The Linux-NTFS project (http://linux-ntfs.sf.net/) aims to bring full support
for the NTFS filesystem to the Linux operating system. The ntfsprogs package
currently consists of a static library and utilities such as mkntfs, ntfscat,
ntfsls, ntfsresize, and ntfsundelete (for a full list of included utilities
see man 8 ntfsprogs after installation).
</p>
-Des:
##----------------------------------------
=Pkg: ntfsprogs-fuse 1.13.1 3 i586
=Sum: NTFS mount utility
+Des:
<!-- DT:Rich -->
<p>This package contains the needed user space application to mount NTFS partitions via fuse.
</p>
-Des:
##----------------------------------------
=Pkg: ntop 3.2 41 i586
=Sum: Web-Based Network Traffic Monitor
+Ins:
<!-- DT:Rich -->
<p>To start ntop, first provide a
password for the user admin. You can do this as user
root with the command
</p><p>
ntop -A -u wwwrun
</p><p>
By default, you may access ntop only
from the local host at port 3000. See also the additional
documentation in
/usr/share/doc/packages/ntop/README.SuSE.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Ntop is a Web-based traffic monitor that shows network usage.
It can be used in both interactive or Web mode using the
embedded Web server.
</p>
-Des:
##----------------------------------------
=Pkg: numlockx 1.1 23 i586
=Sum: Switch on/off or toggle numlock
+Des:
<!-- DT:Rich -->
<p>This little thingy allows you to start X with NumLock turned on ( which is
a feature that a lot of people seem to miss and nobody really knew how to
achieve this ).
This code relies on X extensions called XTest and XKB, so you need to have
at least one of these X extensions installed ( you most probably do ).
</p>
-Des:
##----------------------------------------
=Pkg: nvtv 0.4.7 48 i586
=Sum: Tool for Adjusting the Video Output of nVidia Video Hardware
+Des:
<!-- DT:Rich -->
<p>This package allows you to enable and fine-tune the TV output of nVidia video cards. It does not require you to use a certain X driver. You should note, however, that you have to run it as user root unless you are using nVidia's driver.
</p>
-Des:
##----------------------------------------
=Pkg: nxtvepg 2.7.5 35 i586
=Sum: Nextview EPG Decoder and Browser
+Des:
<!-- DT:Rich -->
<p>In this software package, find a decoder for Nextview--an electronic
TV program guide for the analog domain (as opposed to the various digital
EPGs that come with most digital broadcasts). It allows you to decode and
browse TV program listings for most of the major networks in Germany,
Austria, France, and Switzerland.
</p><p>
Currently, Nextview EPG is transmitted by:<ul>
<li>In Germany and Austria: Kabel1, 3Sat, RTL-II, EuroNews
=Sum: Kernel modules for Omnibooks from omke-project
+Des:
<!-- DT:Rich -->
<p>Linux kernel modules for several HP Omnibooks/HP Pavilion, HP/Compaq nx*,
Compal, Fujitsu Siemens Amilo, Acer Aspire and Toshiba Satellite machines.
This module include ac, battery, fan, lcd, ec, onetouch, temperature,
touchpad and util support.
</p>
-Des:
##----------------------------------------
=Pkg: opal 2.3.1 30 i586
=Sum: Open Phone Abstraction Library
+Des:
<!-- DT:Rich -->
<p>Open Phone Abstraction Library, implementation of the ITU H.323
teleconferencing protocol, and successor of the openh323 library.
It supports not only the H.323 protocol but also SIP and IAX2.
</p>
-Des:
##----------------------------------------
=Pkg: open-iscsi 2.0.713 11 i586
=Sum: Linux* Open-iSCSI Software Initiator
+Des:
<!-- DT:Rich -->
<p>Open-iSCSI is a high-performance, transport independent,
multi-platform implementation of RFC3720 iSCSI.
</p><p>
Open-iSCSI is partitioned into user and kernel parts.
</p><p>
The kernel portion of Open-iSCSI is a from-scratch code
licensed under GPL. The kernel part implements iSCSI data path
(that is, iSCSI Read and iSCSI Write), and consists of two
loadable modules: iscsi_if.ko and iscsi_tcp.ko.
</p><p>
User space contains the entire control plane: configuration
manager, iSCSI Discovery, Login and Logout processing,
connection-level error processing, Nop-In and Nop-Out handling,
and (in the future:) Text processing, iSNS, SLP, Radius, etc.
</p><p>
The user space Open-iSCSI consists of a daemon process called
iscsid, and a management utility iscsiadm.
</p>
-Des:
##----------------------------------------
=Pkg: openSUSE-release 10.2 35 i586
=Sum: SuSE release version files
+Des:
<!-- DT:Rich -->
<p>This package contains the files: /etc/SuSE-release, /etc/issue, and /etc/issue.net
</p>
-Des:
##----------------------------------------
=Pkg: openal 0.0.8 12 i586
=Sum: Open Audio Library
+Des:
<!-- DT:Rich -->
<p>OpenAL is an audio library designed in the spirit of OpenGL--machine
independent, cross platform, and data format neutral with a clean,
simple C-based API.
</p>
-Des:
##----------------------------------------
=Pkg: openbox 3.3.1 21 i586
=Sum: ICCCM and EWMH Compliant Window Manager with Very Few Dependencies
+Des:
<!-- DT:Rich -->
<p>Openbox is a window manager for the X Window System.
It currently runs on a large list of platforms. It was originally based on
Blackbox, but is, since version 3.0, a complete reimplementation with
these features, among others:
</p><p>
o ICCCM and EWMH compliance
o Chainable key bindings
o Customizable mouse actions
o Window resistance
o Multihead Xinerama support
o Pipe menus
</p><p>
The configuration tool "obconf" is recommended along with this
package.
</p>
-Des:
##----------------------------------------
=Pkg: openct 0.6.9 18 i586
=Sum: OpenCT Library for Smart Card Readers
+Des:
<!-- DT:Rich -->
<p>OpenCT is a set of library and tools to talk to smart card readers. It
currently supports Towitoko readers, Kobil Kaan, Aladdin eToken,
Cryptoflex eGate, Rainbow iKey 3000, and Eutron Crypto Identity. OpenCT
is used by the OpenSC Smart Card library.
</p>
-Des:
##----------------------------------------
=Pkg: openct-devel 0.6.9 18 i586
=Sum: OpenCT Library for Smart Card Readers
+Des:
<!-- DT:Rich -->
<p>OpenCT is a set of libraries and tools for talking to smart card readers. It
currently supports Towitoko readers, Kobil Kaan, Aladdin eToken,
Cryptoflex eGate, Rainbow iKey 3000, and Eutron Crypto Identity. OpenCT
is used by the OpenSC smart card library.
</p>
-Des:
##----------------------------------------
=Pkg: openh323 1.19.0.1 27 i586
=Sum: An Open Source ITU H.323 Library and Sample Application
+Des:
<!-- DT:Rich -->
<p>The OpenH323 project aims to create a full featured, interoperable, and open
source implementation of the ITU H.323 teleconferencing protocol that can be
used by personal developers and commercial users without charge.
</p><p>
OpenH323 development is coordinated by an Australian company, Equivalence Pty
Ltd (http://www.equival.com), but is open to any interested party. Commercial
and private use of the OpenH323 code, including use in commercial products
and resale, is encouraged through use of the MPL (Mozilla Public license).
</p>
-Des:
##----------------------------------------
=Pkg: openh323-devel 1.19.0.1 27 i586
=Sum: OpenH323 Library for developers
+Des:
<!-- DT:Rich -->
<p>This package contains header and script files of the openh323 library
for developers
</p>
-Des:
##----------------------------------------
=Pkg: openjade 1.3.2 242 i586
=Sum: DSSSL Engine for SGML Documents
+Des:
<!-- DT:Rich -->
<p>OpenJade, the follow-up to Jade by James Clark, is an
implementation of the ISO/IEC 10179:1996 standard DSSSL language (Document Style, Semantics, and Specification Language); pronounce it "dissl"--it rhymes with whistle.
</p><p>
It has back-ends for SGML, RTF, MIF, TeX, and HTML.
</p><p>
The parser, "nsgmls," and helper tools like "sgmlnorm," "spam,"
"spent," and "sx" are now included in the separate "opensp" package.
</p>
-Des:
##----------------------------------------
=Pkg: openldap2 2.3.27 25 i586
=Sum: The New OpenLDAP Server (LDAPv3)
+Des:
<!-- DT:Rich -->
<p>The Lightweight Directory Access Protocol (LDAP) is used to
access online directory services. It runs directly over TCP and
can be used to access a stand-alone LDAP directory service or to access
a directory service that has an X.500 back-end.
</p>
-Des:
##----------------------------------------
=Pkg: openldap2-client 2.3.27 25 i586
=Sum: OpenLDAP2 Client Utilities
+Des:
<!-- DT:Rich -->
<p>This package contains the OpenLDAP2 client utilities.
</p>
-Des:
##----------------------------------------
=Pkg: openldap2-devel 2.3.27 25 i586
=Sum: Libraries, Header Files and Documentation for OpenLDAP2
+Des:
<!-- DT:Rich -->
<p>This package provides the OpenLDAP2 libraries, header files, and documentation.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif 2.3.0beta2 32 i586
=Sum: Open Motif
+Des:
<!-- DT:Rich -->
<p>This is the Open Motif runtime environment. It includes the Motif shared libraries. Open Motif is a freely available version of the well known Motif user interface toolkit for Open Source operating systems. This package was built with the Metro Link sources.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif-libs 2.3.0beta2 32 i586
=Sum: Open Motif Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This is the Open Motif runtime environment. It includes the Motif shared libraries. Open Motif is a freely available version of the well known user interface toolkit Motif for Open Source operating systems. This package was
built with the sources from Metro Link.
</p>
-Des:
##----------------------------------------
=Pkg: openobex 1.3 22 i586
=Sum: Open Source Implementation of the Object Exchange (OBEX) Protocol
+Des:
<!-- DT:Rich -->
<p>OBEX is a session protocol and can best be described as a binary HTTP protocol. OBEX is optimized for ad-hoc wireless links and can be used to exchange all kind of objects, like files, pictures, calendar entries (vCal), and business cards (vCard).
</p>
-Des:
##----------------------------------------
=Pkg: opensc 0.11.1 18 i586
=Sum: OpenSC Smart Card Library
+Des:
<!-- DT:Rich -->
<p>OpenSC provides a set of libraries and utilities to access smart cards. Its main focus is on cards that support cryptographic operations. It facilitates their use in security applications such as mail encryption, authentication, and digital signature. OpenSC implements the PKCS#11 API so applications supporting this API, such as Mozilla Firefox and Thunderbird, can use it. OpenSC implements the PKCS#15 standard and aims to be compatible with every software that does so, too.
</p>
-Des:
##----------------------------------------
=Pkg: opensc-devel 0.11.1 18 i586
=Sum: Additional files needed for OpenSC development
+Des:
<!-- DT:Rich -->
<p>This package contains files required to develop applications
using the OpenSC framework.
</p>
-Des:
##----------------------------------------
=Pkg: openslp 1.2.0 45 i586
=Sum: An OpenSLP Implementation of Service Location Protocol V2
+Des:
<!-- DT:Rich -->
<p>Service Location Protocol is an IETF standards track protocol that
provides a framework that allows networking applications to discover the
existence, location, and configuration of networked services in
enterprise networks.
</p><p>
OpenSLP is an open source implementation of the SLPv2 protocol as defined
by RFC 2608 and RFC 2614. This package includes the slptool and runtime
libraries.
</p>
-Des:
##----------------------------------------
=Pkg: openslp-server 1.2.0 45 i586
=Sum: The OpenSLP Implementation of the Service Location Protocol V2
+Des:
<!-- DT:Rich -->
<p>Service Location Protocol is an IETF standards track protocol that
provides a framework that allows networking applications to discover the
existence, location, and configuration of networked services in
enterprise networks.
</p><p>
This package contains the SLP server. Every system, which provides any services that should be used via an SLP client must run this server and register the service.
</p>
-Des:
##----------------------------------------
=Pkg: opensp 1.5.1 113 i586
=Sum: The OpenJade Group's SGML and XML Parsing Tools
+Des:
<!-- DT:Rich -->
<p>The tools in this package provide the ability to manage SGML and XML
documents.
</p><p>
This package contains the parser nsgmls and the related programs sgmlnorm, spcat,
spam, spent, and sgml2xml (previously known as sx).
Sgml2xml is useful as a tool for converting from
SGML to XML, the coming WWW standard.
</p><p>
This package is a fork from James Clark's SP suite.
</p>
-Des:
##----------------------------------------
=Pkg: opensp-devel 1.5.1 113 i586
=Sum: SGML parser tools (development package)
+Des:
<!-- DT:Rich -->
<p>Libraries and includes to compile applications that use the SGML parser tools (package 'opensp').
</p>
-Des:
##----------------------------------------
=Pkg: openssh 4.4p1 24 i586
=Sum: Secure Shell Client and Server (Remote Login Program)
+Des:
<!-- DT:Rich -->
<p>SSH (Secure Shell) is a program for logging into and executing commands on a remote machine.
It is intended to replace rlogin and rsh and provides
secure encrypted communication between two untrusted
hosts over an insecure network. X Window System connections and
arbitrary TCP/IP ports can also be forwarded over the
secure channel.
</p>
-Des:
##----------------------------------------
=Pkg: openssh-askpass 4.4p1 24 i586
=Sum: A passphrase dialog for OpenSSH and the X Window System
+Des:
<!-- DT:Rich -->
<p>Ssh (Secure Shell) is a program for logging into a remote
machine and for executing commands on a remote machine.
This package contains an X Window System passphrase dialog for OpenSSH.
</p>
-Des:
##----------------------------------------
=Pkg: openssl 0.9.8d 17 i586
=Sum: Secure Sockets and Transport Layer Security
+Des:
<!-- DT:Rich -->
<p>The OpenSSL Project is a collaborative effort to develop a robust,
commercial-grade, full-featured, and open source toolkit implementing
the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS
v1) protocols with full-strength cryptography. The project
is managed by a worldwide community of volunteers that use the
Internet to communicate, plan, and develop the OpenSSL toolkit and its
related documentation.
</p><p>
</p><p>
Derivation and License
</p><p>
</p><p>
OpenSSL is based on the excellent SSLeay library developed by Eric
A. Young and Tim J. Hudson. The OpenSSL toolkit is licensed under an
Apache-style license, which basically means that you are free to get it
and to use it for commercial and noncommercial purposes.
</p>
-Des:
##----------------------------------------
=Pkg: openssl-devel 0.9.8d 17 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: opensuse-updater 0.4 31 i586
=Sum: KDE updater applet for OpenSUSE
##----------------------------------------
=Pkg: openswan 2.4.6 25 i586
=Sum: IPsec Implementation which Allows Building of VPNs
+Ins:
<!-- DT:Rich -->
<p>Novell/SUSE have been granted a license to (re)export of this piece of software outside of the US, as it provides strong cryptographic algorithms to ensure privacy.
Other countries (Russia, France, and more) may have restrictions to import or use this software. Please check!
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>OpenS/WAN is the successor of FreeS/WAN.
</p><p>
OpenS/WAN is an IPsec implementation which allows building Virtual
Private Networks (VPNs). A typical VPN setup consists of two trusted
networks connected over an insecure network, typically the Internet.
OpenS/WAN allows you to create an encrypted tunnel through the
insecure area. Unlike CIPE, it is interoperable with other operating
systems or even router IPsec implementations
</p>
-Des:
##----------------------------------------
=Pkg: openvpn 2.0.8 16 i586
=Sum: Create VPN over Wireless and Ethernet Networks using a Tun Device
+Des:
<!-- DT:Rich -->
<p>Create VPN over wireless and ethernet networks using a tun device.
</p>
-Des:
##----------------------------------------
=Pkg: opera 9.02 19 i586
=Sum: The Opera Web Browser
+Des:
<!-- DT:Rich -->
<p>Opera is user-friendly, secure, and exceptionally fast. The browser is small, yet full-featured and functions well on systems with limited resources. Opera supports all common Web standards and implements them according to the official recommendations.
</p>
-Des:
##----------------------------------------
=Pkg: opie 2.4 586 i586
=Sum: Support for One-Time Passwords
+Des:
<!-- DT:Rich -->
<p>OPIE stands for One-time Passwords In Everything. One-time passwords
can be used to foil password sniffers because they cannot be reused by
the attacker.
</p><p>
This package provides a PAM module and several utility programs that let
you use one-time passwords for authentication.
</p>
-Des:
##----------------------------------------
=Pkg: oprofile 0.9.2 21 i586
=Sum: System-Wide Profiler for Linux Systems
+Des:
<!-- DT:Rich -->
<p>OProfile is a system-wide profiler for Linux systems, capable of profiling
all running code at low overhead. OProfile is released under the GNU GPL.
</p><p>
It consists of a kernel module and a daemon for collecting sample data, and
several post-profiling tools for turning data into information.
</p><p>
OProfile leverages the CPU hardware performance counters to enable
profiling of a wide variety of interesting statistics, which can also be used
for basic time-spent profiling. All code is profiled: hardware and software
interrupt handlers, kernel modules, the kernel, shared libraries, and
applications (the only exception being the oprofile interrupt handler itself).
</p><p>
OProfile is currently in alpha status; however it has proven stable over a
large number of differing configurations. As always, there is no warranty.
</p><p>
This is the package containing the userspace tools.
</p>
-Des:
##----------------------------------------
=Pkg: orbit 0.5.17 371 i586
=Sum: A High-Performance CORBA ORB
+Des:
<!-- DT:Rich -->
<p>ORBit is a high-performance CORBA ORB used by the GNOME Project.
</p><p>
</p><p>
It allows programs to send requests and receive replies from other
programs, regardless of the locations of the two programs.
<p>ORBit is a high-performance CORBA (Common Object Request Broker
Architecture) ORB (Object Request Broker). It allows programs to
send requests and receive replies from other programs, regardless
of the locations of the two programs. CORBA is an architecture that
enables communication between program objects, regardless of the
programming language they are written in or the operating system they
run on.
</p><p>
You will need to install this package if you want to run programs that use
the CORBA technology ORBit implementation.
</p>
-Des:
##----------------------------------------
=Pkg: orbit2-devel 2.14.3 18 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>ORBit is a high-performance CORBA (Common Object Request Broker
Architecture) ORB (object request broker). It allows programs to
send requests and receive replies from other programs, regardless
of the locations of the two programs. CORBA is an architecture that
enables communication between program objects, regardless of the
programming language they are written in or the operating system they
run on.
</p><p>
You will need to install this package if you want to run programs that use
the ORBit implementation of the CORBA technology.
</p>
-Des:
##----------------------------------------
=Pkg: orca 1.0.0 26 i586
=Sum: Screen reader for GNOME
+Des:
<!-- DT:Rich -->
<p>Orca is a free, open source, flexible, and extensible screen reader
that provides access to the graphical desktop via user-customizable
combinations of speech, braille, and/or magnification. Under
development by the Sun Microsystems, Inc., Accessibility Program
Office since 2004, Orca has been created with early input from and
continued engagement with its end users. In fact, the user interface
designer for Orca is also a user.
</p>
-Des:
##----------------------------------------
=Pkg: oto 0.4 266 i586
=Sum: Open Type Organizer
+Des:
<!-- DT:Rich -->
<p>The 'Open Type Organizer' project provides programs to list and modify
tables in OpenType font files, specifically, their 'name' and 'cmap'
tables. It can be used to translate 'name' and 'cmap' of OpenType
font in locale encodings to Unicode encoding so the font file can be
used in an environment which does not understand locale encodings. The
translated tables are added to the font while keeping the original
tables intact.
</p><p>
Do you have a True Type font which does not work with Xft (e.g. with
KDE and Antialiasing)? Chances are, the font doesn't have a Unicode
'cmap'! Open Type Organizer (oTo) will help to solve the problem. It
will add Unicode 'name' and Unicode 'cmap' tables by translating the
original ones. Your favorite ttf font can really work for you now.
</p>
-Des:
##----------------------------------------
=Pkg: pacman 1.001 886 i586
=Sum: A Pacman Game
+Des:
<!-- DT:Rich -->
<p>Another pacman-game.
</p>
-Des:
##----------------------------------------
=Pkg: pam 0.99.6.3 24 i586
=Sum: A security tool that provides authentication for applications
+Des:
<!-- DT:Rich -->
<p>PAM (Pluggable Authentication Modules) is a system security tool
that allows system administrators to set authentication policies
without having to recompile programs that do authentication.
</p>
-Des:
##----------------------------------------
=Pkg: pam-config 0.13 8 i586
=Sum: Modify common PAM configuration files
+Des:
<!-- DT:Rich -->
<p>pam-config is a command line utility to maintain the common PAM configuration files included by most PAM application configuration files. It can be used to configure a system for different network or hardware based authentication schemes. pam-config can also add/adjust/remove other PAM modules and their options.
</p>
-Des:
##----------------------------------------
=Pkg: pam-devel 0.99.6.3 24 i586
=Sum: Include Files and Libraries for PAM-Development
+Des:
<!-- DT:Rich -->
<p>PAM (Pluggable Authentication Modules) is a system security tool
which allows system administrators to set authentication policy
without having to recompile programs which do authentication.
</p><p>
This package contains header files and static libraries used for
building both PAM-aware applications and modules for use with PAM.
</p>
-Des:
##----------------------------------------
=Pkg: pam-modules 10.2 31 i586
=Sum: Additional PAM Modules
+Del:
<!-- DT:Rich -->
<p>If you remove this package, you will no longer be able to
login to your system!
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>PAM (Pluggable Authentication Modules) is a system security tool
that allows system administrators to set authentication policies
without having to recompile programs that do authentication.
</p><p>
</p><p>
This package contains additional PAM Modules, which are necessary
for a working SuSE Linux System: pam_unix2, pam_pwcheck and
pam_homecheck
</p>
-Des:
##----------------------------------------
=Pkg: pam_cifs 0.43 22 i586
=Sum: PAM module for mount/umount CIFS shares
+Des:
<!-- DT:Rich -->
<p>pam_cifs is responsible for mounting cifs-shares on login of users to the
system. It is really usefull in combination with pam_ldap and nss_ldap. The
unmounting of cifs-shares is done via a little daemon, to ensure, that the
filesystem isn't in use anymore.
</p>
-Des:
##----------------------------------------
=Pkg: pam_krb5 2.2.11 17 i586
=Sum: PAM Module for Kerberos Authentication
+Des:
<!-- DT:Rich -->
<p>This PAM module supports authentication against a Kerberos KDC.
It also supports updating your Kerberos password.
</p>
-Des:
##----------------------------------------
=Pkg: pam_ldap 183 10 i586
=Sum: A PAM Module for LDAP Authentication
+Des:
<!-- DT:Rich -->
<p>This is a PAM Module that handles LDAP.
The advantages of this pecular version are:
</p><p>
Possibility to change LDAP passwords in the directory
</p><p>
Compatibility with the nss_ldap configuration file format
</p>
-Des:
##----------------------------------------
=Pkg: pam_mount 0.18 20 i586
=Sum: A PAM Module that can Mount Volumes for a User Session.
+Des:
<!-- DT:Rich -->
<p>This module is aimed at environments with SMB (Samba or Windows NT)
or NCP (Netware or Mars-NWE) servers that Unix users wish to access
transparently. It facilitates access to private volumes of these types.
This module also supports mounting home directories using
loopback encrypted filesystems. The module was originally written for
use on the Linux operating system but has since been modified to
work on several flavors of BSD.
</p><p>
o Every user can access their own volumes
</p><p>
o The user only needs to type the password once (at login)
</p><p>
o The mounting process is transparent to the user
</p><p>
o There is no need to keep the login passwords in any additional files
</p><p>
o The volumes are unmounted on logout, so it saves system resources,
avoiding the need to list every possibly useful remote
volume in /etc/fstab or in an automount/supermount config file. This
is also necessary for securing encrypted filesystems.
</p><p>
Pam_mount "understands" SMB, NCP, and any type of filesystem that can
be mounted using the standard mount command. If someone has a
particular need for a different filesystem, feel free to ask me to
include it and send me patches.
</p>
-Des:
##----------------------------------------
=Pkg: pam_smb 2.0.0rc6 38 i586
=Sum: A PAM Module for User Authentication using an NT Server
+Des:
<!-- DT:Rich -->
<p>pam_smb is a PAM module which allows authentication of UNIX users using an NT
server.
</p>
-Des:
##----------------------------------------
=Pkg: pam_ssh 1.94 28 i586
=Sum: PAM Module for SSH Authentication
+Des:
<!-- DT:Rich -->
<p>This module provides single sign-on behavior. The user types a passphrase when
logging in and is allowed in if it decrypts the user s SSH private key.
An ssh-agent is started and keys are added. For the entire session, the user
types no more passwords.
</p>
-Des:
##----------------------------------------
=Pkg: pan 0.119 5 i586
=Sum: A Powerful Newsreader for GNOME
+Des:
<!-- DT:Rich -->
<p>PAN is a very powerful newsreader. Its user interface is loosely based on other popular newsreaders.
</p>
-Des:
##----------------------------------------
=Pkg: pango 1.14.5 16 i586
=Sum: System for Layout and Rendering of Internationalised Text
+Des:
<!-- DT:Rich -->
<p>Pango is a library for layout and rendering of text, with an emphasis on internationalisation. It forms the core of text and font handling in GTK+ 2.0.
</p>
-Des:
##----------------------------------------
=Pkg: pango-devel 1.14.5 16 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: par 1.1 62 i586
=Sum: Parity File Generator
+Des:
<!-- DT:Rich -->
<p>Parchive creates extra parity data over several volumes. These can be used to restore the complete archive after some data loss or corruption.
</p><p>
par is used by Dar.
</p>
-Des:
##----------------------------------------
=Pkg: parted 1.7.1 24 i586
=Sum: GNU partitioner
+Des:
<!-- DT:Rich -->
<p>GNU Parted is a program for creating, destroying, resizing, checking, and
copying partitions, and the file systems on them.
</p>
-Des:
##----------------------------------------
=Pkg: patch 2.5.9 178 i586
=Sum: GNU patch
+Des:
<!-- DT:Rich -->
<p>The GNU <tt>patch</tt> program is used to apply diffs between original and
changed files (generated by the <tt>diff</tt> command) to the original files.
</p>
-Des:
##----------------------------------------
=Pkg: patchrpm 1.1 30 i586
=Sum: Tools to create patchrpms
+Des:
<!-- DT:Rich -->
<p>Tools to create patchrpms.
</p>
-Des:
##----------------------------------------
=Pkg: patchutils 0.2.31 30 i586
=Sum: A Collection of Tools for Manipulating Patch Files
+Des:
<!-- DT:Rich -->
<p>Patchutils contains a collection of tools for manipulating patch files:
interdiff, combinediff, filterdiff, fixcvsdiff, rediff, lsdiff, and splitdiff.
You can use interdiff to create an incremental patch between two patches that
are against a common source tree. Combinediff can be used for creating a cumulative diff
from two incremental patches. Filterdiff is for extracting or excluding patches
from a patch set based on modified files matching shell wildcards. Lsdiff lists
modified files in a patch. Rediff corrects hand-edited patches.
</p>
-Des:
##----------------------------------------
=Pkg: pax 3.4 32 i586
=Sum: POSIX File System Archiver
+Des:
<!-- DT:Rich -->
<p>Pax is the POSIX standard archive tool. It supports the two most
common forms of standard archive (backup) files - CPIO and TAR.
</p>
-Des:
##----------------------------------------
=Pkg: pbm2l7k 990321 826 i586
=Sum: Driver for Lexmark Printers 7000, 7200, and 5700
+Des:
<!-- DT:Rich -->
<p>A driver for Lexmark printers 7000, 7200, and 5700. This driver
translates PBM (Portable Bitmap) into the printer protocol
for the Lexmark printers 7000, 7200, and 5700.
</p>
-Des:
##----------------------------------------
=Pkg: pciutils 2.2.4 13 i586
=Sum: PCI-utilities for Kernel version 2.2 and newer
+Des:
<!-- DT:Rich -->
<p>lspci: This program displays detailed information about all PCI busses and devices
in the system, replacing the original /proc/pci interface.
</p><p>
setpci: This program allows reading from and writing to PCI device configuration
registers. For example, you can adjust the latency timers with it.
</p><p>
update-pciids: This program downloads the current version of the pci.ids file.
</p>
-Des:
##----------------------------------------
=Pkg: pcmciautils 012 32 i586
=Sum: Utilities for PC-Cards
+Des:
<!-- DT:Rich -->
<p>This package enables the usage of PC-Cards with Linux. It provides hotplug
scripts and tools that set up sockets and cards. Since kernel 2.6.13 card injection and removal are handled completely via hotplug. Therefore a deamon like 'cardmgr' is no longer needed. Soft ejecting and inserting cards can be done with pccardctl (what was cardctl before). There are also some tools for debugging and CIS handling.
</p>
-Des:
##----------------------------------------
=Pkg: pcre 6.7 21 i586
=Sum: A library for Perl-compatible regular expressions
+Des:
<!-- DT:Rich -->
<p>The PCRE library is a set of functions that implement regular
expression pattern matching using the same syntax and semantics
as Perl 5, with very few differences. The current
implementation corresponds to Perl 5.005.
</p>
-Des:
##----------------------------------------
=Pkg: pcre-devel 6.7 21 i586
=Sum: A library for Perl-compatible regular expressions
+Des:
<!-- DT:Rich -->
<p>The PCRE library is a set of functions that implement regular
expression pattern matching using the same syntax and semantics
as Perl 5, with very few differences. The current
implementation corresponds to Perl 5.005.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-acr38 100705_P 38 i586
=Sum: PC/SC IFD Handler for the ACR38 Smart Card Reader
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for the ACR 38 smart card reader produced by
ACS. This driver is meant to be used with the PCSC-Lite daemon from the
pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-ccid 1.0.1 24 i586
=Sum: PCSC driver for CCID based smartcard readers
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for USB smart card readers based on the
CCID (Chip/Smart Card Interface Devices) protocol, as well as a driver
for the GemPC Twin serial reader.
</p><p>
These drivers are meant to be used with the PCSC-Lite daemon
from the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-cyberjack 2.0.10 41 i586
=Sum: PC/SC IFD Handler for the Reiner SCT Cyberjack USB-SmartCard Reader
+Des:
<!-- DT:Rich -->
<p>This package includes the PC/SC IFD handler for the Reiner SCT Cyberjack pinpad/e-com USB chipcard reader. The driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p><p>
The kernel side driver is included in the official Linux Kernel starting with version 2.4.6.
</p><p>
For more information about the reader and software updates see:
=Sum: PCSC driver for the Aladdin eToken PRO USB plugs
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for the Aladdin eToken PRO usb plug. This is
a security token that is attached via USB and operates like a smart card and
reader combined. The driver is meant to be used with the PCSC-Lite daemon
from the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-lite 1.3.2 17 i586
=Sum: The MUSCLE project SmartCards library
+Des:
<!-- DT:Rich -->
<p>The purpose of PCSC Lite is to provide a Windows(R) SCard interface in
a very small form factor for communicating with smartcards and readers.
PCSC Lite can be compiled directly for a desired reader driver or can be
used to dynamically allocate/deallocate reader drivers at runtime (the default behavior).
</p><p>
PCSC Lite uses the same winscard api as used in Windows(R).
</p><p>
Security aware people should read the SECURITY file for possible
vulnerabilities to pcsclite, how you can fix them, and how some will
be fixed.
</p><p>
For information on how to install drivers please read the DRIVERS file.
</p><p>
Memory cards will be supported through the MCT specifications, which is an APDU like manner sent normally through the SCardTransmit() function. This
functionality is done in the driver.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-lite-devel 1.3.2 17 i586
=Sum: Development package for the MUSCLE project SmartCards library
+Des:
<!-- DT:Rich -->
<p>This package contains the development files for pcsc-lite. It allows to compile plugins for the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: penguin-command 1.6.6 229 i586
=Sum: A Clone of the Classic Missile Command Game
+Des:
<!-- DT:Rich -->
<p>Penguin Command is a clone of the classic Missile Command game,
with better graphics and sound. The gameplay has been slightly modified.
</p>
-Des:
##----------------------------------------
=Pkg: perl 5.8.8 32 i586
=Sum: The Perl interpreter
+Des:
<!-- DT:Rich -->
<p>perl - Practical Extraction and Report Language
</p><p>
Perl is optimized for scanning arbitrary text
files, extracting information from those text files, and
printing reports based on that information. It is also
good for many system management tasks.
Perl is intended to be practical (easy to use,
efficient, and complete) rather than beautiful (tiny, elegant,
and minimal).
</p><p>
Some of the modules available on CPAN can be found in the "perl" series.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Algorithm-Diff 1.1902 20 i586
=Sum: Compute 'Intelligent' Differences Between Two Files or Lists
+Des:
<!-- DT:Rich -->
<p>This Perl module helps to create differences between two files or lists. It is used by 'perl-diffmk'
</p>
-Des:
##----------------------------------------
=Pkg: perl-Apache-AuthCookie 3.10 10 i586
=Sum: Apache/Perl Authentication and Authorization via cookies
+Des:
<!-- DT:Rich -->
<p>Apache::AuthCookie allows you to intercept a user's first unauthenticated access to a protected document. The user will be presented with a custom form where they can enter authentication credentials. The credentials are posted to the server where AuthCookie verifies them and returns a session key.
</p><p>
The session key is returned to the user's browser as a cookie. As a cookie, the browser will pass the session key on every subsequent accesses. AuthCookie will verify the session key and re-authenticate the user.
</p><p>
All you have to do is write a custom module that inherits from AuthCookie.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Apache-AuthNetLDAP 0.29 38 i586
=Sum: use Net::LDAP for user authentication in Apache
+Des:
<!-- DT:Rich -->
<p>Apache::AuthNetLDAP - mod_perl module that uses the Net::LDAP module
for user authentication for Apache. This module authenticates users
via LDAP using the Net::LDAP module. This module is Graham Barr's
"pure" Perl LDAP API. It also uses all of the same parameters as the
Apache::AuthPerLDAP, but I have added two extra parameters.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Apache-DBI 1.03 20 i586
=Sum: Apache authentication via perl DBI
+Des:
<!-- DT:Rich -->
<p>These modules are supposed to be used with the Apache server together
with an embedded perl interpreter like mod_perl. They provide support
for basic authentication and authorization as well as support for
persistent database connections via Perl's Database Independent
Interface (DBI).
</p>
-Des:
##----------------------------------------
=Pkg: perl-Apache-Session 1.81 23 i586
=Sum: persistent storage for arbitrary data
+Des:
<!-- DT:Rich -->
<p>These modules provide persistent storage for arbitrary data, in
arbitrary backing stores. The details of interacting with the backing
store are abstracted to make all backing stores behave alike. The
programmer simply interacts with a tied hash.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Apache-SessionX 2.01 34 i586
=Sum: Persistent Storage for Arbitrary Data (for Embperl)
+Ins:
<!-- DT:Rich -->
<p>This software is still beta.
</p>
-Ins:
+Del:
<!-- DT:Rich -->
<p>HTML-Embperl will not work without this package.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Apache::SessionX extends Apache::Session. It was initially written to
use Apache::Session from inside of HTML::Embperl, but is seems to be
useful outside of Embperl as well, so here is it as standalone module.
</p>
-Des:
##----------------------------------------
=Pkg: perl-AppConfig 1.63 17 i586
=Sum: Perl module for reading configuration files and parsing command line arguments
+Des:
<!-- DT:Rich -->
<p>AppConfig is a Perl module for managing application configuration
information. It maintains the state of any number of variables and
provides methods for parsing configuration files and command line
arguments.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Archive-Tar 1.30 17 i586
=Sum: Perl module for creation and manipulation of tar files
+Des:
<!-- DT:Rich -->
<p>Perl module for creation and manipulation of tar files
</p>
-Des:
##----------------------------------------
=Pkg: perl-Archive-Zip 1.16 31 i586
=Sum: perl-Archive-Zip
+Des:
<!-- DT:Rich -->
<p>Perl module for creation and manipulation of ZIP-files
</p>
-Des:
##----------------------------------------
=Pkg: perl-Authen-SASL 2.10 20 i586
=Sum: SASL Authentication framework
+Des:
<!-- DT:Rich -->
<p>SASL is a generic mechanism for authentication used by several
network protocols. Authen::SASL provides an implementation
framework that all protocols should be able to share.
</p><p>
The framework allows different implementations of the connection
class to be plugged in. At the time of writing there were two such
plugins.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Authen-SASL-Cyrus 0.12 36 i586
=Sum: SASL Authentication Framework - Cyrus Plugin
+Des:
<!-- DT:Rich -->
<p>SASL is a generic mechanism for authentication used by several network
protocols.
</p><p>
Authen::SASL::Cyrus is a plug-in for the Authen::SASL module and provides
an implementation framework that all protocols should be able to share.
</p><p>
The XS framework makes calls to the existing libsasl.so shared library
to perform SASL client connection functionality, including loading existing
shared library mechanisms.
</p>
-Des:
##----------------------------------------
=Pkg: perl-BerkeleyDB 0.31 12 i586
=Sum: Perl Module for Accessing Berkeley DB Functions
+Des:
<!-- DT:Rich -->
<p>BerkeleyDB is a module that allows Perl programs to use the
facilities provided by Berkeley DB version 2 or greater.
To use version 1 of Berkeley DB with Perl, you need the DB_File module.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Bit-Vector 6.4 31 i586
=Sum: Efficient bit vector, set of integers and "big int" math library
+Des:
<!-- DT:Rich -->
<p>Bit::Vector is an efficient C library which allows you to handle
bit vectors, sets (of integers), "big integer arithmetic" and
boolean matrices, all of arbitrary sizes
</p>
-Des:
##----------------------------------------
=Pkg: perl-Bootloader 0.4.5 3 i586
=Sum: Library for Configuring Boot Loaders
+Des:
<!-- DT:Rich -->
<p>Perl modules for configuring various boot loaders.
</p>
-Des:
##----------------------------------------
=Pkg: perl-CDDB_get 2.27 30 i586
=Sum: Read the CDDB entry for an audio CD in your drive
+Des:
<!-- DT:Rich -->
<p>This module/script gets the CDDB info for an audio cd. You need
LINUX, SUNOS or *BSD, a cdrom drive and an active internet connection
in order to do that.
</p>
-Des:
##----------------------------------------
=Pkg: perl-CGI-Application 4.06 8 i586
=Sum: Framework for building reusable web-applications
+Des:
<!-- DT:Rich -->
<p>CGI::Application is intended to make it easier to create sophisticated, reusable web-based applications.
</p><p>
This module implements a methodology which, if followed, will make your web
software easier to design, easier to document, easier to write, and easier
to evolve.
</p><p>
CGI::Application builds on standard, non-proprietary technologies and
techniques, such as the Common Gateway Interface and Lincoln D. Stein's
technologies and techniques which would bind a developer to any one set of
tools, operating system or web server.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Cairo 1.01 16 i586
=Sum: Perl bindings to the cairo graphics library.
+Des:
<!-- DT:Rich -->
<p>Perl bindings to the cairo graphics library (http://www.cairographics.org).
</p>
-Des:
##----------------------------------------
=Pkg: perl-Carp-Clan 5.7 14 i586
=Sum: Report Errors from the Perspective of the Caller of a "Clan" of Modules
+Des:
<!-- DT:Rich -->
<p>This module reports errors from the perspective of the caller of a
"clan" of modules, similar to "Carp.pm" itself. But instead of giving
it a number of levels to skip on the calling stack, you give it a
pattern to characterize the package names of the "clan" of modules
that should never be blamed for any error. It makes these modules stick
together like a "clan" and any error that
occurs will be blamed on the "outsider" script or modules not belonging
to this "clan".
</p>
-Des:
##----------------------------------------
=Pkg: perl-Chart 2.4.1 33 i586
=Sum: perl libs for generating Charts
+Des:
<!-- DT:Rich -->
<p>perl Chart libs
</p>
-Des:
##----------------------------------------
=Pkg: perl-Compress-Zlib 1.42 20 i586
=Sum: Perl interface to part of the info-zip zlib compression library
+Des:
<!-- DT:Rich -->
<p>Perl interface to part of the info-zip zlib compression library
</p>
-Des:
##----------------------------------------
=Pkg: perl-Config-Crontab 1.20 10 i586
=Sum: Read/Write Vixie compatible crontab files
+Des:
<!-- DT:Rich -->
<p>Config::Crontab reads and writes (and pretty-prints) your crontab(5)
files. It is compatible with Vixie-style crontabs (and all subsets,
including Solaris' SysV-style crontabs).
</p><p>
Config::Crontab has a simple, object-oriented syntax. Crontab files
are broken into "blocks" (paragraphs, each separated by two or more
newlines); the Block is the basic unit of a Config::Crontab object.
</p><p>
You can re-order entire blocks within a crontab file, re-order lines
within blocks (there are three types of lines: comments, environment
settings, and crontab commands or events), remove blocks or lines
within blocks, add new blocks or lines within blocks, etc. See the
Config::Crontab manpage for full details.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Config-General 2.31 30 i586
=Sum: Generic Config Module
+Des:
<!-- DT:Rich -->
<p>Generic Config Module
</p>
-Des:
##----------------------------------------
=Pkg: perl-Config-IniFiles 2.39 31 i586
=Sum: A module for reading .ini-style configuration files
+Des:
<!-- DT:Rich -->
<p>Config::IniFiles provides a way to have readable configuration files
outside your Perl script.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Convert-ASN1 0.20 20 i586
=Sum: Convert::ASN1
+Des:
<!-- DT:Rich -->
<p>Convert::ASN1 converts between Perl data structures and ASN.1 encoded packets.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Convert-TNEF 0.17 292 i586
=Sum: Perl module to read TNEF files
+Des:
<!-- DT:Rich -->
<p>Perl module to read TNEF files
</p>
-Des:
##----------------------------------------
=Pkg: perl-Convert-UUlib 1.051 31 i586
=Sum: Perl interface to the uulib library
+Des:
<!-- DT:Rich -->
<p>Perl interface to the uulib library
</p>
-Des:
##----------------------------------------
=Pkg: perl-Crypt-Blowfish 2.10 31 i586
=Sum: Blowfish encryption for Perl
+Des:
<!-- DT:Rich -->
<p>Blowfish Algorithm as a Perl module.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Crypt-CBC 2.19 17 i586
=Sum: perl module Crypt::CBC
+Des:
<!-- DT:Rich -->
<p>Perl-only implementation of the cryptographic
cipher block chaining mode (CBC).
</p>
-Des:
##----------------------------------------
=Pkg: perl-Crypt-DES 2.05 30 i586
=Sum: Crypt::DES Perl Module
+Des:
<!-- DT:Rich -->
<p>An XS-based DES implementation for Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Crypt-SSLeay 0.51 147 i586
=Sum: perl module that provides LWP https support
+Des:
<!-- DT:Rich -->
<p>This perl module provides support for the https protocol under LWP, so
that a LWP::UserAgent can make https GET & HEAD & POST requests. Please
see perldoc LWP for more information on POST requests.
</p><p>
The Crypt::SSLeay package contains Net::SSL, which is automatically
loaded by LWP::Protocol::https on https requests, and provides the
necessary SSL glue for that module to work via these deprecated modules:
</p>
-Des:
##----------------------------------------
=Pkg: perl-Crypt-SmbHash 0.12 31 i586
=Sum: perl module Crypt::SmbHash
+Des:
<!-- DT:Rich -->
<p>This module provides functions to generate LM/NT hashes as used by Samba
</p>
-Des:
##----------------------------------------
=Pkg: perl-Cyrus-IMAP 2.2.13 24 i586
=Sum: Cyrus IMAP Perl Module
+Des:
<!-- DT:Rich -->
<p>A Cyrus IMAP Perl module for the Cyrus IMAPD.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Cyrus-SIEVE-managesieve 2.2.13 24 i586
=Sum: A Perl Module for Cyrus SIEVE
+Des:
<!-- DT:Rich -->
<p>A Perl module for Cyrus SIEVE.
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-CSV 0.22 32 i586
=Sum: The DBD::CSV module is yet another driver for the DBI
+Des:
<!-- DT:Rich -->
<p>The DBD::CSV module is yet another driver for the DBI (Database independent interface for Perl). This one is based on the SQL "engine" SQL::Statement and the abstract DBI driver DBD::File and implements access to so-called CSV files (Comma separated values). Such files are mostly used for exporting MS Access and MS Excel data.
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-ODBC 1.06 264 i586
=Sum: Perl DBD module for interfacing with ODBC databases
+Des:
<!-- DT:Rich -->
<p>This module is needed to access ODBC databases from within Perl.
The module uses the unixODBC manager to connect to the database.
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-Pg 1.49 22 i586
=Sum: DBD::Pg - DBI driver for PostgreSQL
+Des:
<!-- DT:Rich -->
<p>This driver is needed to access PostgreSQL databases from Perl
programs through the Perl Database Interface (DBI).
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-SQLite 1.13 19 i586
=Sum: The DBD::SQLite is a self contained RDBMS in a DBI driver
+Des:
<!-- DT:Rich -->
<p>SQLite is a small fast embedded SQL database engine.
</p><p>
DBD::SQLite embeds that database engine into a DBD driver, so
if you want a relational database for your project, but don't
want to install a large RDBMS system like MySQL or PostgreSQL,
then DBD::SQLite may be just what you need.
</p><p>
It supports quite a lot of features, such as transactions (atomic
commit and rollback), indexes, DBA-free operation, a large subset
of SQL92 supported, and more.
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-XBase 0.241 59 i586
=Sum: Provides Access to XBase Files
+Des:
<!-- DT:Rich -->
<p>Module XBase provides access to XBase (dBase, Fox*) database files,
namely dbf, dbt, fpt, ndx, ntx, mdx, idx and cdx.
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-mysql 3.0008 12 i586
=Sum: Interface to the MySQL database
+Des:
<!-- DT:Rich -->
<p>A Perl5 Database Interface to the MySQL database
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBI 1.52 17 i586
=Sum: The Perl Database Interface
+Des:
<!-- DT:Rich -->
<p>The Perl Database Interface by Tim Bunce.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Data-ShowTable 3.3 602 i586
=Sum: A Perl Module that allows Pretty-Printing of Data Arrays
+Des:
<!-- DT:Rich -->
<p>ShowTable.pm is a Perl 5 module which defines subroutines to print arrays of
data in nicely formatted listings. It uses one of four possible formats: simple
table, boxed table, list style, and HTML-formatting.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Date-Calc 5.4 32 i586
=Sum: Perl Date-Calc Module
+Des:
<!-- DT:Rich -->
<p>This package consists of a C library and a Perl module (which uses
the C library, internally) for all kinds of date calculations based
on the Gregorian calendar (the one used in all western countries today),
thereby complying with all relevant norms and standards: ISO/R 2015-1971,
DIN 1355 and, to some extent, ISO 8601 (where applicable).
</p><p>
(See also http://www.engelschall.com/u/sb/download/Date-Calc/DIN1355/
for a scan of part of the "DIN 1355" document (in German)).
</p><p>
The module of course handles year numbers of 2000 and above correctly
("Year 2000" or "Y2K" compliance) -- actually all year numbers from 1
to the largest positive integer representable on your system (which
is at least 32767) can be dealt with.
</p><p>
Note that this package EXTRAPOLATES the Gregorian calendar BACK
until the year 1 A.D. -- even though the Gregorian calendar was only
adopted in 1582 by most (not all) European countries, in obedience to
the corresponding decree of catholic pope Gregor I in that year.
</p><p>
Some (mainly protestant) countries continued to use the Julian calendar
(used until then) until as late as the beginning of the 20th century.
</p><p>
Finally, note that this package is not intended to do everything you could
ever imagine automagically for you; it is rather intended to serve as a
toolbox (in the best of UNIX spirit and traditions) which should, however,
always get you where you want to go.
</p>
-Des:
##----------------------------------------
=Pkg: perl-DateManip 5.44 30 i586
=Sum: Date Manipulation Routines
+Des:
<!-- DT:Rich -->
<p>This is a set of routines designed to make any common date and time manipulation
easy to perform. Operations such as comparing two times, calculating a time a
given amount of time from another time, or parsing international times are all
easily accomplished.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Digest-HMAC 1.01 525 i586
=Sum: Keyed Hashing for Message Authentication
+Des:
<!-- DT:Rich -->
<p>HMAC is used for message integrity checks between two parties that
share a secret key. HMAC works in combination with another Digest
algorithm, usually MD5 or SHA-1. The HMAC mechanism is described in
<p>Perl interface to the RSA Data Security Inc. MD4 Message-Digest Algorithm.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Digest-SHA1 2.11 20 i586
=Sum: A Perl Interface to the SHA-1 Algorithm
+Des:
<!-- DT:Rich -->
<p>The Digest::SHA1 module allows the use of the NIST SHA-1 message
digest algorithm from within Perl programs. The algorithm takes
a message of arbitrary length as input and produces a 160-bit
fingerprint or message digest of the input as output.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Encode-HanExtra 0.10 31 i586
=Sum: Extra sets of Chinese encodings
+Des:
<!-- DT:Rich -->
<p>Perl 5.7.3 and later ships with an adequate set of Chinese encodings,
including the most used CP950, CP936 (also known as GBK), Big5,
Big5-HKSCS, EUC-CN, HZ, and ISO-IR-165.
</p><p>
However, the numbers of Chinese encodings are staggering, and a
complete coverage will easily increase the size of perl distribution
by several megabytes; hence, this CPAN module tries to provide the
rest of them.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Encode-JIS2K 0.02 32 i586
=Sum: JIS X 0212 (aka JIS 2000) Encodings
+Des:
<!-- DT:Rich -->
<p>This module implements encodings that covers JIS X 0213 charset (AKA
JIS 2000, hence the module name).
</p>
-Des:
##----------------------------------------
=Pkg: perl-ExtUtils-Depends 0.205 31 i586
=Sum: ExtUtils-Depends Perl module
+Des:
<!-- DT:Rich -->
<p>This module tries to make it easy to build Perl extensions that use functions
and typemaps provided by other perl extensions. This means that a perl
extension is treated like a shared library that provides also a C and an XS
interface besides the perl one. This works as long as the base extension is
loaded with the RTLD_GLOBAL flag (usually done with a sub dl_load_flags {0x01}
in the main .pm file) if you need to use functions defined in the module.
</p>
-Des:
##----------------------------------------
=Pkg: perl-ExtUtils-PkgConfig 1.07 31 i586
=Sum: ExtUtils-PkgConfig Perl module
+Des:
<!-- DT:Rich -->
<p>This module is a simplistic Perl interface to the pkg-config command-line
utility, for use in the Makefile.PLs used to build Perl modules which wrap
the libraries about which pkg-config knows.
</p>
-Des:
##----------------------------------------
=Pkg: perl-File-MMagic 1.22 33 i586
=Sum: Perl modules to guess file types
+Des:
<!-- DT:Rich -->
<p>Perl modules to guess file types
</p>
-Des:
##----------------------------------------
=Pkg: perl-File-Tail 0.99.3 30 i586
=Sum: reading files which are continuously appended
+Des:
<!-- DT:Rich -->
<p>The File::Tail module is designed for reading files which are continously
appended to (the name comes from the tail -f directive). Usually such files are logfiles of some description.
</p>
-Des:
##----------------------------------------
=Pkg: perl-File-Type 0.22 34 i586
=Sum: determine file type using magic
+Des:
<!-- DT:Rich -->
<p>File::Type uses magic numbers (typically at the start of a file) to determine the MIME type of that file.
</p>
-Des:
##----------------------------------------
=Pkg: perl-FileHandle-Unget 0.1621 30 i586
=Sum: Perl module for creating a FileHandle which supports ungetting of multiple bytes
+Des:
<!-- DT:Rich -->
<p>FileHandle::Unget is a drop-in replacement for FileHandle which allows more
than one byte to be placed back on the input. It supports an ungetc(ORD) which
can be called more than once in a row, and an ungets(SCALAR) which places a
string of bytes back on the input.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Filter 1.32 30 i586
=Sum: Source Filters
+Des:
<!-- DT:Rich -->
<p>This package consists of a number of Source Filters. For more details see the pod documentation embedded in the .pm files.
</p><p>
If you intend using the Filter::Call functionality, I would strongly recommend that you check out Damian Conway's excellent Filter::Simple module. This module provides a much cleaner interface than Filter::Util::Call. Although it doesn't allow the fine control that Filter::Util::Call does, it should be adequate for the majority of applications.
</p>
-Des:
##----------------------------------------
=Pkg: perl-GD 2.35 18 i586
=Sum: Interface to Thomas Boutell's gd library
+Des:
<!-- DT:Rich -->
<p>This is an autoloadable interface module for libgd, a popular library
for creating and manipulating PNG files. With this library you can
create PNG images on the fly or modify existing files.
</p><p>
This version of GD no longer supports GIF output because of threats from
the legal department at Unisys. Source code that calls $image->gif will
have to be changed to call either $image->jpg or $image->png to output
in JPEG or PNG formats. The last version of GD that supported GIF output
was version 1.19.
</p>
-Des:
##----------------------------------------
=Pkg: perl-GDGraph 1.43 43 i586
=Sum: package to generate charts, using Lincoln Stein's GD.pm
+Des:
<!-- DT:Rich -->
<p>This is GDGraph, a package to generate charts, using Lincoln Stein's
GD.pm. See the documentation for some history and more information.
</p>
-Des:
##----------------------------------------
=Pkg: perl-GDTextUtil 0.85 160 i586
=Sum: text utilities for use with the GD drawing package
+Des:
<!-- DT:Rich -->
<p>This package provides three modules that make it possible to work with
internal GD fonts as well as TrueType fonts, without having to worry
about different interface functions to call. Apart from an abstract
interface to all font types and strings for GD, this library also
provides some utility in aligning and wrapping your string.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Clean 0.8 706 i586
=Sum: Cleans up HTML code for web browsers, not humans
+Des:
<!-- DT:Rich -->
<p>The majority of the web pages of the internet today are
much larger than they need to be. The reason for this is
that HTML tends to be stored in a human readable format, with
indenting, newlines and comments.
</p><p>
</p><p>
However, all of these comments, whitespace etc. are ignored by
the browser, and needlessly lengthen download times.
</p><p>
</p><p>
Second, many people are using WYSIWYG HTML editors these days.
This makes creating content easy. However these editors can
cause a number of compatibility problems by tying themselves to
a particular browser or operating system.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-FillInForm 1.06 30 i586
=Sum: Perl module HTML::FillInForm
+Des:
<!-- DT:Rich -->
<p>This module automatically inserts data from a previous HTML form
into the HTML input and select tags. It is a subclass of HTML::Parser
and uses it to parse the HTML and insert the values into the form tags.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Parser 3.55 20 i586
=Sum: Perl HTML Interface
+Des:
<!-- DT:Rich -->
<p>This is a collection of modules that parse and extract information
from HTML documents.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-SimpleParse 0.12 152 i586
=Sum: a bare-bones HTML parser
+Des:
<!-- DT:Rich -->
<p>This is the HTML::SimpleParse module. It is a bare-bones HTML parser,
similar to HTML::Parser, but with a couple important distinctions:
</p><p>
</p><p>
First, HTML::Parser knows which tags can contain other tags, which
start tags have corresponding end tags, which tags can exist only in
the <HEAD> portion of the document, and so forth. HTML::SimpleParse
does not know any of these things. It just finds tags and text in the
HTML you give it, it does not care about the specific content of these
tags (though it does distiguish between different _types_ of tags,
such as comments, starting tags like <b>, ending tags like </b>, and
so on).
</p><p>
</p><p>
Second, HTML::SimpleParse does not create a hierarchical tree of HTML
content, but rather a simple linear list. It does not pay any
attention to balancing start tags with corresponding end tags, or
which pairs of tags are inside other pairs of tags.
</p><p>
</p><p>
Because of these characteristics, you can make a very effective HTML
filter by sub-classing HTML::SimpleParse.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Tagset 3.10 30 i586
=Sum: Data Tables Useful for Dealing with HTML
+Des:
<!-- DT:Rich -->
<p>Data tables useful for dealing with HTML.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Template 2.8 30 i586
=Sum: This Module Attempts to make using HTML Templates Simple and Natural
+Des:
<!-- DT:Rich -->
<p>This allows you to separate design - the HTML - from the data, which you
generate in the Perl script.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Template-Expr 0.07 20 i586
=Sum: This Module Provides an Extension to HTML::Template
+Des:
<!-- DT:Rich -->
<p>This module provides an extension to HTML::Template which allows
expressions in the template syntax.
</p><p>
Expression support includes comparisons, math operations, string
operations, and a mechanism to allow you to add your own functions at
runtime.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Template-JIT 0.05 30 i586
=Sum: Just-In-Time Compiler for HTML Templates
+Des:
<!-- DT:Rich -->
<p>This is a just in time compiler for the HTML Template module. Makes the use of templates very fast.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Tree 3.21 20 i586
=Sum: Modules for representing, creating, and extracting information from HTML syntax trees
+Des:
<!-- DT:Rich -->
<p>This distribution contains a suite of modules for representing,
creating, and extracting information from HTML syntax trees; there is
also relevent documentation. These modules used to be part of the
libwww-perl distribution, but are now unbundled in order to facilitate
a separate development track.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTTP-DAV 0.31 76 i586
=Sum: A WebDAV client library for Perl5
+Des:
<!-- DT:Rich -->
<p>PerlDAV is a Perl library for modifying content on webservers using the
WebDAV protocol. Now you can LOCK, DELETE and PUT files and much more on
a DAV-enabled webserver.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTTPS-Daemon 1.02 38 i586
=Sum: a simple http server class with SSL support
+Des:
<!-- DT:Rich -->
<p>HTTP::Daemon::SSL is a descendant of HTTP::Daemon that uses SSL
sockets (via IO::Socket::SSL) instead of cleartext sockets. It
also handles SSL-specific problems, such as dealing with HTTP
clients that attempt to connect to it without using SSL.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Multiplex 1.08 14 i586
=Sum: Manage IO on many file handles
+Des:
<!-- DT:Rich -->
<p>"IO::Multiplex" reduces the effort of managing multiple file handles.
It is a fancy front end to the "select" system call.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Socket-SSL 1.01 19 i586
=Sum: IO::Socket::SSL Perl Module
+Des:
<!-- DT:Rich -->
<p>IO::Socket::SSL is a class implementing an object oriented
interface to SSL sockets. The class is a descendant of
IO::Socket::INET and provides a subset of the base class'
interface methods.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-String 1.08 30 i586
=Sum: Perl IO/String interface
+Des:
<!-- DT:Rich -->
<p>IO::String is an IO::File (and IO::Handle) compatible class that read
or write data from in-core strings.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Stty .02 550 i586
=Sum: A Perl Module for Setting Terminal Parameters
+Des:
<!-- DT:Rich -->
<p>IO::Stty is a Perl module for setting terminal parameters.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Zlib 1.04 32 i586
=Sum: IO:: style interface to the Compress::Zlib
+Des:
<!-- DT:Rich -->
<p>This module provides an IO:: style interface to the Compress::Zlib
package.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-stringy 2.110 31 i586
=Sum: I/O on in-core objects like strings and arrays
+Des:
<!-- DT:Rich -->
<p>I/O on in-core objects like strings and arrays
</p>
-Des:
##----------------------------------------
=Pkg: perl-Image-Size 3.01 17 i586
=Sum: A Perl Module to deal with Dimensions of an Image in Several Popular Formats
+Des:
<!-- DT:Rich -->
<p>The Image::Size library is based upon the "wwwis" script written by Alex Knowles *(alex@ed.ac.uk)*, a tool to examine HTML and add 'width' and height' parameters to image tags. The sizes are cached internally based on the file name, so multiple calls on the same file name (images used in bulleted lists, for example) do not result in repeated computations.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Inline 0.44 224 i586
=Sum: Write Perl subroutines in other programming languages
+Des:
<!-- DT:Rich -->
<p>Inline lets you write Perl subroutines in other programming languages, like
C, C++, Java, Python, Tcl and even Assembly. You don't need to compile
anything. All the details are handled transparently, so you can just run your
Perl script like normal.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Log-Log4perl 1.07 8 i586
=Sum: Log4j implementation for Perl
+Des:
<!-- DT:Rich -->
<p>Log4j implementation for Perl
</p>
-Des:
##----------------------------------------
=Pkg: perl-MIME-Lite 3.01 173 i586
=Sum: Module for Generating MIME messages
+Des:
<!-- DT:Rich -->
<p>MIME::Lite is intended as a simple, standalone module for generating
(not parsing!) MIME messages... specifically, it allows you to output a
simple, decent single- or multi-part message with text or binary
attachments. It does not require that you have the Mail:: or MIME::
modules installed.
</p>
-Des:
##----------------------------------------
=Pkg: perl-MIME-Types 1.17 17 i586
=Sum: MIME-Type Determination
+Des:
<!-- DT:Rich -->
<p>MIME types are used in MIME entities, for instance as part of e-mail and HTTP traffic. Sometimes real knowledge about a mime-type is need. This module will supply it.
</p>
-Des:
##----------------------------------------
=Pkg: perl-MIME-tools 5.420 20 i586
=Sum: modules for parsing (and creating!) MIME entities
+Des:
<!-- DT:Rich -->
<p>modules for parsing (and creating!) MIME entities
</p>
-Des:
##----------------------------------------
=Pkg: perl-MP3-Info 1.13 31 i586
=Sum: MP3::Info - Manipulate / fetch info from MP3 audio files
+Des:
<!-- DT:Rich -->
<p>A pure-Perl module for getting and setting ID3 tags, and getting other
information (bitrate, length, etc.), for MP3 files.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Mail-Mbox-MessageParser 1.4005 17 i586
=Sum: A fast and simple mbox folder reader
+Des:
<!-- DT:Rich -->
<p>Mail::Mbox::MessageParser is a feature-poor but very fast mbox parser. It uses
the best of three strategies for parsing a mailbox: either using cached folder
information, GNU grep, or highly optimized Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-MailTools 1.74 20 i586
=Sum: a set of perl modules related to mail applications
+Des:
<!-- DT:Rich -->
<p>a set of perl modules related to mail applications
</p>
-Des:
##----------------------------------------
=Pkg: perl-NKF 2.0.5 31 i586
=Sum: Perl extension for nkf (Network Kanji Filter)
+Des:
<!-- DT:Rich -->
<p>This is a Perl Extension version of nkf (Network Kanji Filter ) 1.9.
</p><p>
Usage:
</p><p>
use NKF;
$output = nkf($flag,$input);
</p><p>
$flag has the same meaning as with nkf.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-DNS 0.59 16 i586
=Sum: Perl interface to the DNS resolver
+Des:
<!-- DT:Rich -->
<p>Net::DNS is a Perl interface to the DNS resolver. It allows the
programmer to perform any type of DNS query from a Perl script.
For details and examples, please read the Net::DNS manual page.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-Daemon 0.39 8 i586
=Sum: Net::Daemon - Perl extension for portable daemons
+Des:
<!-- DT:Rich -->
<p>Net::Daemon is an abstract base class for implementing portable server applications in a very simple way.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-IP 1.23 32 i586
=Sum: allow easy manipulation of IPv4 and IPv6 addresses
+Des:
<!-- DT:Rich -->
<p>This is the Net::IP module, designed to allow easy manipulation of IPv4 and
IPv6 addresses.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-IPv4Addr 0.10 35 i586
=Sum: Net::IPv4Addr Module for Perl
+Des:
<!-- DT:Rich -->
<p>Net::IPv4Addr provides functions for parsing IPv4 addresses both
in traditional address/netmask format and in the new CIDR format.
There are also methods for calculating the network and broadcast
address and also to see check if a given address is in a specific
network.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-Netmask 1.9014 12 i586
=Sum: Parse, manipulate and lookup IP network blocks
+Des:
<!-- DT:Rich -->
<p>Parse, manipulate and lookup IP network blocks.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-SNMP 5.2.0 30 i586
=Sum: Net::SNMP Perl Module
+Des:
<!-- DT:Rich -->
<p>The Net::SNMP module implements an object oriented interface to
the Simple Network Management Protocol.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-Server 0.94 18 i586
=Sum: Net::Server - Extensible, general Perl server engine
+Des:
<!-- DT:Rich -->
<p>"Net::Server" attempts to be a generic server as in "Net::Daemon" and
"NetServer::Generic".
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-Telnet 3.03 213 i586
=Sum: Net::Telnet - interact with TELNET port or other TCP ports
+Des:
<!-- DT:Rich -->
<p>Net::Telnet allows you to make client connections to a TCP port and do
network I/O, especially to a port using the TELNET protocol. Simple
I/O methods such as print, get, and getline are provided. More
sophisticated interactive features are provided because connecting to
a TELNET port ultimately means communicating with a program designed
for human interaction. These interactive features include the ability
to specify a time-out and to wait for patterns to appear in the input
stream, such as the prompt from a shell.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-XMPP 1.0 35 i586
=Sum: Collection of Perl Modules for Accessing the XMPP Protocol
+Des:
<!-- DT:Rich -->
<p>The Extensible Messaging and Presence Protocol (XMPP) is an IETF standard
that provides a complete cross-protocol messaging solution. The problem
with current IM solutions is that they are all proprietary and cannot
talk to each other. XMPP seeks to get rid of those barriers.
</p><p>
For more information about the Jabber project, visit http://www.xmpp.org.
</p><p>
Net::XMPP is a collection of Perl modules that provide a Perl developer
with access to the XMPP protocol. Using OOP modules, it provides a clean
interface to writing anything from a full client to a simple protocol
tester.
</p>
-Des:
##----------------------------------------
=Pkg: perl-NetAddr-IP 3.32 20 i586
=Sum: NetAddr::IP - Manages IP addresses and subnets
+Des:
<!-- DT:Rich -->
<p>This module is designed as a help for managing (ranges of) IP
addresses. It includes efficient implementations for most common tasks
done to subnets or ranges of IP addresses, namely verifying if an
address is within a subnet, comparing, looping, splitting subnets into
longer prefixes, compacting addresses to the shortest prefixes, etc.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net_SSLeay 1.30 32 i586
=Sum: Net::SSLeay Perl Module
+Des:
<!-- DT:Rich -->
<p>The Net::SSLeay Perl module for using OpenSSL.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PDA-Pilot 0.12.1 27 i586
=Sum: PalmPilot Perl Modules
+Des:
<!-- DT:Rich -->
<p>This package contains Perl modules for communicating with the Palm Pilot.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Parse-RecDescent 1.80 277 i586
=Sum: Perl RecDescent Module
+Des:
<!-- DT:Rich -->
<p>RecDescent incrementally generates top-down recursive-descent text
parsers from simple yacc-like grammar specifications.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PerlMagick 6.3.0.0 16 i586
=Sum: Perl interface for ImageMagick
+Des:
<!-- DT:Rich -->
<p>PerlMagick is an objected-oriented Perl interface to ImageMagick.
Use the module to read, manipulate, or write an image or image sequence
from within a Perl script. This makes it suitable for Web CGI scripts.
You must have ImageMagick 4.0.8 above and Perl version 5.002 or greater
installed on your system.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PlRPC 0.2018 31 i586
=Sum: Perl Extension for Writing PlRPC Servers
+Des:
<!-- DT:Rich -->
<p>PlRPC (Perl RPC) is a package for implementing servers and clients that
are written in Perl entirely. The name is borrowed from Sun's RPC
(Remote Procedure Call), but it could as well be RMI like Java's Remote
Method Interface, because PlRPC gives you the complete power of Perl's
OO framework in a very simple manner.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PostScript-Simple 0.07 30 i586
=Sum: a simple method of writing PostScript files from Perl
+Des:
<!-- DT:Rich -->
<p>PostScript::Simple allows you to have a simple method of writing PostScript
files from Perl. It has several graphics primitives that allow lines, circles,
polygons and boxes to be drawn. Text can be added to the page using standard
PostScript fonts.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Qt 3.008 180 i586
=Sum: Perl Qt Qt module for Perl
+Des:
<!-- DT:Rich -->
<p>Perl Qt lets you use the Qt widgets from within an Perl application.
</p>
-Des:
##----------------------------------------
=Pkg: perl-SGMLS 1.03ii 415 i586
=Sum: SGML/XML Parsers
+Des:
<!-- DT:Rich -->
<p>SGMLSpm is a Perl script that reads ESIS output (from parsers like SP) and offers an event-based interface to the parser. As long as the parser can parse XML this also works for XML.
</p>
-Des:
##----------------------------------------
=Pkg: perl-SNMP 5.4.rc2 4 i586
=Sum: Perl-SNMP
+Des:
<!-- DT:Rich -->
<p>The Perl5 'SNMP' Extension Module v3.1.0
for the UCD SNMPv3 library.
</p>
-Des:
##----------------------------------------
=Pkg: perl-SOAP-Lite 0.69 10 i586
=Sum: SOAP::Lite for Perl
+Des:
<!-- DT:Rich -->
<p>SOAP::Lite for Perl is a collection of Perl modules which provides a simple and lightweight interface to the Simple Object Access Protocol (SOAP, also known as Service Oriented Access Protocol) both on client and server side.
</p>
-Des:
##----------------------------------------
=Pkg: perl-SQL-Statement 1.15 10 i586
=Sum: Perl Module SQL::Statement
+Des:
<!-- DT:Rich -->
<p>SQL parsing and processing engine
</p>
-Des:
##----------------------------------------
=Pkg: perl-SVN-Simple 0.27 39 i586
=Sum: A simple interface to subversion's editor interface
+Des:
<!-- DT:Rich -->
<p>SVN::Simple::Edit wraps the subversion delta editor with a perl friendly interface and then you could easily drive it for describing changes to a tree. A common usage is to wrap the commit editor, so you could make commits to a subversion repository easily.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Template-Toolkit 2.15 21 i586
=Sum: Fast and/ Powerful Template System for Perl
+Des:
<!-- DT:Rich -->
<p>The Template Toolkit is a fast, powerful, and easily extensible template processing system written in Perl with certain key elements coded in C for maximum speed. It is ideally suited (but not limited) to the creation of static and dynamic web content, and incorporates various modules and tools to simplify this process.
</p>
-Des:
##----------------------------------------
=Pkg: perl-TermReadKey 2.30 31 i586
=Sum: A Perl Module for Simple Terminal Control
+Des:
<!-- DT:Rich -->
<p>ReadKey provides ioctl control for terminals and Win32
consoles so the input modes can be changed (thus allowing reads of a single
character at a time), and also provides non-blocking reads of stdin as well
as several other terminal related features, including retrieval and modification
of the screen size and retrieval and modification of the control characters.
</p>
-Des:
##----------------------------------------
=Pkg: perl-TermReadLine-Gnu 1.15 32 i586
=Sum: Perl extension for the GNU Readline/History Library
+Des:
<!-- DT:Rich -->
<p>This is an implementation of Term::ReadLine using the GNU
Readline/History Library. This package also has the interface with
the almost all functions and variables which are documented in the
GNU Readline/History Library Manual.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Text-CSV_XS 0.23 390 i586
=Sum: Perl Module Text::CSV
+Des:
<!-- DT:Rich -->
<p>ext::CSV provides facilities for the composition and decomposition of comma-separated values. An instance of the Text::CSV class can combine fields into a CSV string and parse a CSV string into fields.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Text-ChaSen 2.3.3 129 i586
=Sum: ChaSen Perl Module
+Des:
<!-- DT:Rich -->
<p>ChaSen Perl Module
</p>
-Des:
##----------------------------------------
=Pkg: perl-Text-Iconv 1.4 32 i586
=Sum: Iconv interface for text recoding
+Des:
<!-- DT:Rich -->
<p>The UNIX iconv interface for perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Text-Kakasi 2.04 31 i586
=Sum: Perl binding for KAKASI, the kanji kana simple inverter
+Des:
<!-- DT:Rich -->
<p>This module provides libkakasi interface for perl. libkakasi is a part
of KAKASI. KAKASI is the language processing filter to convert Kanji
characters to Hiragana, Katakana or Romaji and may be helpful to read
Japanese documents. More information about KAKASI is available at
<http://kakasi.namazu.org/>.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Tie-Cache 0.17 274 i586
=Sum: Perl module Tie::Cache
+Des:
<!-- DT:Rich -->
<p>This module implements a least recently used (LRU) cache in memory
through a tie interface.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Tie-IxHash 1.21 618 i586
=Sum: TieIxHash Perl Module
+Des:
<!-- DT:Rich -->
<p>If you have been led to believe that associative arrays in Perl
do not preserve order, and if you have ever craved that feature,
this module is for you.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Time-Duration 1.04 20 i586
=Sum: Rounded or exact English expression of durations
+Des:
<!-- DT:Rich -->
<p>This module provides functions for expressing durations in rounded or exact terms.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Time-Period 1.20 335 i586
=Sum: A Perl Module for dealing with Time Periods
+Des:
<!-- DT:Rich -->
<p>Period.pm is a Perl module that contains code for dealing with time periods.
Currently, there is only one function in this module. That function is
called inPeriod().
</p>
-Des:
##----------------------------------------
=Pkg: perl-Time-modules 2006.0814 17 i586
=Sum: Various Perl time modules
+Des:
<!-- DT:Rich -->
<p>Perl modules providing various time functions.
</p>
-Des:
##----------------------------------------
=Pkg: perl-TimeDate 1.16 154 i586
=Sum: Perl Modules for Time and Date Calculation
+Des:
<!-- DT:Rich -->
<p>These modules provide Perl functions for performing time and date calculations.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Tk 804.027 31 i586
=Sum: Perl Tk
+Des:
<!-- DT:Rich -->
<p>Perl Tk is an enhancement for Perl. It combines the well structured
graphical library Tk with the powerful scripting language Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-URI 1.35 33 i586
=Sum: Perl Interface for URI Objects
+Des:
<!-- DT:Rich -->
<p>A Perl interface for URI objects.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Unicode-Map8 0.12 180 i586
=Sum: Mapping table between 8-bit chars and Unicode
+Des:
<!-- DT:Rich -->
<p>The Unicode::Map8 class implement efficient mapping tables between
8-bit character sets and 16-bit character sets like Unicode. The
tables are efficient both in terms of space allocated and translation
speed. The 16-bit strings is assumed to use network byte order.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Unicode-String 2.09 30 i586
=Sum: String of Unicode characters (UCS2/UTF16)
+Des:
<!-- DT:Rich -->
<p>A Unicode::String object represents a sequence of Unicode characters.
The Unicode Standard is a fixed-width, uniform encoding scheme for
written characters and text. This encoding treats alphabetic characters,
ideographic characters, and symbols identically, which means that they
can be used in any mixture and with equal facility. Unicode is modeled
on the ASCII character set, but uses a 16-bit encoding to support full
multilingual text.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Unix-Syslog 0.100 59 i586
=Sum: Perl syslog interface
+Des:
<!-- DT:Rich -->
<p>Perl interface to syslog
</p>
-Des:
##----------------------------------------
=Pkg: perl-WeakRef 0.01 14 i586
=Sum: API for weak references to be created in Perl
+Des:
<!-- DT:Rich -->
<p>A patch to Perl 5.005_55 by the author implements a core API for weak
references. This module is a Perl-level interface to that API, allowing
weak references to be created in Perl.
</p><p>
A weak reference is just like an ordinary Perl reference except that
it isn't included in the reference count of the thing referred to.
This means that once all references to a particular piece of data are
weak, the piece of data is freed and all the weak references are set
to undef. This is particularly useful for implementing circular
data structures without memory leaks or caches of objects.
</p>
-Des:
##----------------------------------------
=Pkg: perl-X500-DN 0.28 151 i586
=Sum: provides an interface for RFC 2253 style DN strings
+Des:
<!-- DT:Rich -->
<p>X500::DN provides a pure perl parser and formatter for RFC 2253 style
DN strings.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-DOM 1.44 33 i586
=Sum: Perl Extension to XML::Parser
+Des:
<!-- DT:Rich -->
<p>http://www.w3.org/DOM/
</p><p>
This is a Perl extension to XML::Parser. It adds a new 'Style' to XML::Parser,
called 'Dom,' that allows XML::Parser to build an Object Oriented datastructure
with a DOM Level 1 compliant interface.
</p><p>
This is a beta version and although there will not be any major API changes,
minor changes may occur as we get feedback
from the people on the perl-xml mailing list. [You can subscribe to
this list by sending a message to subscribe-perl-xml@lyris.activestate.com.]
</p><p>
</p><p>
For documentation read the manpages XML::Dom and XML::DOM::UTF8.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Generator 0.99 34 i586
=Sum: A Perl Module to help with generating XML Documents
+Des:
<!-- DT:Rich -->
<p>XML::Generator - A module to help with generating XML documents.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-LibXML 1.61 15 i586
=Sum: XML::LibXML Perl Module
+Des:
<!-- DT:Rich -->
<p>This module implements a Perl interface to the GNOME libxml2 library. The
libxml2 library provides interfaces for parsing and manipulating XML
files. This module allows Perl programmers to make use of the highly capable
validating XML parser and the high performance DOM implementation.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-LibXML-Common 0.13 35 i586
=Sum: XML::LibXML::Common Perl Module
+Des:
<!-- DT:Rich -->
<p>XML::LibXML::Common contains several constants and functions that
are shared by XML::LibXML, XML::GDOME, and XML::LibXSLT (not all done, yet).
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-LibXSLT 1.59 20 i586
=Sum: XML::LibXSLT Perl Module
+Des:
<!-- DT:Rich -->
<p>This module is a fast XSLT library, based on the GNOME libxslt engine
that you can find at http://www.xmlsoft.org/XSLT/.
</p><p>
Performance is currently about twice that of XML::Sablotron (based on
XSLTMark tests converted to Perl).
The libxslt processor is also highly standard compliant, with practically
all of XSLT 1.0 being supported in version 0.9 of libxslt.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-NamespaceSupport 1.09 31 i586
=Sum: XML::NamespaceSupport Perl Module
+Des:
<!-- DT:Rich -->
<p>This module offers a simple way to process namespaced XML names
(unames) from within any application that may need them. It
also helps maintain a prefix to namespace URI map, and provides
a number of basic checks.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Parser 2.34 61 i586
=Sum: XML Parser (Perl Module)
+Des:
<!-- DT:Rich -->
<p>This is a Perl extension interface to James Clark's XML parser, expat.
</p><p>
</p><p>
You will find examples in /usr/share/doc/packages/perl-XML-Parser/samples. For
documentation read the XML::Parser and XML::Parser::Expat man pages.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-RegExp 0.03 509 i586
=Sum: Regular Expressions for XML Tokens
+Des:
<!-- DT:Rich -->
<p>This package contains regular expressions for the following XML tokens:
EntityRef, CharRef, Reference, Name, NmToken, and AttValue.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-SAX 0.12 35 i586
=Sum: XML::SAX Perl Module
+Des:
<!-- DT:Rich -->
<p>XML::SAX consists of several framework classes for using and building
Perl SAX2 XML parsers, filters, and drivers. It is designed around the
need to be able to "plug in" different SAX parsers to an application
without requiring programmer intervention. Those of you familiar with
the DBI will be right at home. Some of the designs come from the Java
JAXP specification (SAX part), only without the javaness.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Simple 2.15 14 i586
=Sum: Easy API to read/write XML (Perl module)
+Des:
<!-- DT:Rich -->
<p>XML::Simple - Easy API to read/write XML (esp config files)
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Stream 1.22 34 i586
=Sum: Creates and XML Stream connection and parses return data
+Des:
<!-- DT:Rich -->
<p>This module provides the user with methods to connect to a remote server,
send a stream of XML to the server, and receive/parse an XML stream from
the server. It is primarily based work for the Etherx XML router
developed by the Jabber Development Team. For more information about
this project visit http://www.jabber.org/protocol/.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Writer 0.601 17 i586
=Sum: A Perl Extension for Writing XML Documents
+Des:
<!-- DT:Rich -->
<p>XML::Writer is a helper module for Perl programs that write XML
documents. The module handles all escaping for attribute values and
character data and constructs different types of markup, such as tags,
comments, and processing instructions.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-XSLT 0.48 59 i586
=Sum: Perl module XML::XSLT
+Des:
<!-- DT:Rich -->
<p>This is a Perl module to parse XSL Transformational sheets.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Xmms 0.12 410 i586
=Sum: Bundle for XMMS Remote Control
+Des:
<!-- DT:Rich -->
<p>This package provides the following modules:
</p><p>
Xmms::Remote - Perl interface to the xmms_remote API
</p><p>
Xmms::Config - Perl interface to the xmms_cfg API
</p><p>
Xmms - Exports the remote control shell routine
</p><p>
Xmms::Plugin - Embeds a Perl interpreter inside XMMS and provides
Input/Output/Effect/General plug-in interfaces for
Perl (not yet released, may never be)
</p>
-Des:
##----------------------------------------
=Pkg: perl-gettext 1.05 31 i586
=Sum: gettext for perl
+Des:
<!-- DT:Rich -->
<p>Gettext for perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-ldap 0.33 34 i586
=Sum: Client Interface for LDAP Servers
+Des:
<!-- DT:Rich -->
<p>A Client interface for LDAP servers.
</p>
-Des:
##----------------------------------------
=Pkg: perl-ldap-ssl 0.33 34 i586
=Sum: SSL Extension to perl-ldap
+Des:
<!-- DT:Rich -->
<p>A Client interface for LDAP servers.
</p>
-Des:
##----------------------------------------
=Pkg: perl-libconfigfile 1.1.1 31 i586
=Sum: Parses simple configuration files
+Des:
<!-- DT:Rich -->
<p>ConfigFile parses simple configuration files and store its values in
an anonymous hash reference. The syntax of the configuration file is
quite simple:
<ol>
<li>This is a comment
VALUE_ONE = foo
VALUE_TWO = $VALUE_ONE/bar
VALUE_THREE = The value contains a \# (hash). # This is a comment.
COMPOSED_VALUE[one] = The first component of a clustered value
COMPOSED_VALUE[two] = The second component of a clustered value
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: perl-libwww-perl 5.805 32 i586
=Sum: Modules Providing a World Wide Web API
+Des:
<!-- DT:Rich -->
<p>Libwww-perl is a collection of Perl modules which provide a simple
and consistent application programming interface (API) to the World Wide Web.
</p>
-Des:
##----------------------------------------
=Pkg: perl-libxml-perl 0.08 31 i586
=Sum: Collection of Perl modules for working with XML
+Des:
<!-- DT:Rich -->
<p>perl-libxml-perl is a collection of Perl modules for working with XML.
</p>
-Des:
##----------------------------------------
=Pkg: perl-razor-agents 2.77 30 i586
=Sum: The required perl modules for razor-agents
+Des:
<!-- DT:Rich -->
<p>razor-agents is are little programs to retrieve or update
information from the razor <http://razor.sourceforge.net/>
network to exchange signatures of SPAM.
This package contains the required perl modules.
</p>
-Des:
##----------------------------------------
=Pkg: perl-spamassassin 3.1.6 15 i586
=Sum: the perl modules for using spamassassin within an own perl script
+Des:
<!-- DT:Rich -->
<p>This package contains the perl modules for the spamassassin,
including the filter rules. This package is required for the
package "spamassassin", the commandline tool.
</p>
-Des:
##----------------------------------------
=Pkg: permissions 2006.11.13 5 i586
=Sum: SUSE Linux Default Permissions
+Des:
<!-- DT:Rich -->
<p>This package contains specifications for permissions of specific files, directories, and devices depending on the local security settings.
The local security setting (easy, secure, or paranoid) can be configured in /etc/sysconfig/security.
</p>
-Des:
##----------------------------------------
=Pkg: pgcalc 2.2 54 i586
=Sum: Scientific Calculator, working in reversed polish notation mode
+Des:
<!-- DT:Rich -->
<p>PG Calculator works in RPN mode. It recognizes real and complex numbers and allows vectors manipulations. There are up to 120 recognized units of measure with possibility to make ease conversions between consistent units.
</p>
-Des:
##----------------------------------------
=Pkg: phalanx 22 542 i586
=Sum: A Chess Program
+Des:
<!-- DT:Rich -->
<p>A smart chess playing program which uses opening book.
</p>
-Des:
##----------------------------------------
=Pkg: php5 5.2.0 10 i586
=Sum: PHP5 Core Files
+Des:
<!-- DT:Rich -->
<p>This package contains the PHP5 core files, including PHP binary (CLI) and PHP configuration (php.ini). This package must be installed in order to use PHP. Additionally, extension modules and server modules (e.g. for Apache) may be installed.
</p><p>
Additional documentation is available in package <a href="pkg://php-doc">php-doc</a>.
</p>
-Des:
##----------------------------------------
=Pkg: php5-bcmath 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Binary Calculator which supports numbers of any size and
precision, represented as strings.
</p>
-Des:
##----------------------------------------
=Pkg: php5-bz2 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions to read and write bzip2 (.bz2) compressed files.
</p>
-Des:
##----------------------------------------
=Pkg: php5-calendar 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for converting between different calendar
formats.
</p>
-Des:
##----------------------------------------
=Pkg: php5-ctype 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for checking whether a character or string falls
into a certain character class according to the current locale.
</p>
-Des:
##----------------------------------------
=Pkg: php5-curl 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface to libcurl that allows you to connect to and
communicate with servers of many different types, using protocols
of many different types.
</p>
-Des:
##----------------------------------------
=Pkg: php5-dbase 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for accessing records stored in dBase-format
(dbf) databases.
</p>
-Des:
##----------------------------------------
=Pkg: php5-devel 5.2.0 10 i586
=Sum: Include files of PHP5
+Des:
<!-- DT:Rich -->
<p>PHP is a server-side, cross-platform, HTML embedded scripting
language. If you are completely new to PHP and want to get some idea
of how it works, have a look at the Introductory Tutorial. Once you
get beyond that have a look at the example archive sites and some of
the other resources available in the Links section.
PHP5 is the latest version.
</p>
-Des:
##----------------------------------------
=Pkg: php5-dom 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module adds DOM support.
</p>
-Des:
##----------------------------------------
=Pkg: php5-exif 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for extracting EXIF (metadata from images)
information stored in headers of JPEG and TIFF images.
</p>
-Des:
##----------------------------------------
=Pkg: php5-fastcgi 5.2.0 10 i586
=Sum: FastCGI PHP5 Module
+Des:
<!-- DT:Rich -->
<p>PHP is a server-side, cross-platform HTML embedded scripting
language. If you are completely new to PHP and want to get some idea
of how it works, have a look at the Introductory tutorial. Once you
get beyond that have a look at the example archive sites and some of
the other resources available in the links section.
</p><p>
Please refer to /usr/share/doc/packages/php4/README.FastCGI for
information on how to use this module.
</p>
-Des:
##----------------------------------------
=Pkg: php5-ftp 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for access to file servers speaking the File
Transfer Protocol (FTP) as defined in rfc959.
</p>
-Des:
##----------------------------------------
=Pkg: php5-gd 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions to create and manipulate image files in a variety
of different image formats, including GIF, PNG, JPEG, WBMP, and
XPM. Even more convenient: PHP can output image streams directly
to a browser.
</p>
-Des:
##----------------------------------------
=Pkg: php5-gettext 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions that implement an NLS (Native Language Support)
API which can be used to internationalize your PHP applications.
</p>
-Des:
##----------------------------------------
=Pkg: php5-gmp 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for work with arbitrary-length integers using the
GNU MP library.
</p>
-Des:
##----------------------------------------
=Pkg: php5-iconv 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface to iconv character set conversion facility.
</p>
-Des:
##----------------------------------------
=Pkg: php5-imap 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions in this extension are not limited to the IMAP
protocol, despite their name. The underlying c-client library
also supports NNTP, POP3 and local mailbox access methods.
</p>
-Des:
##----------------------------------------
=Pkg: php5-json 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Support for JSON (JavaScript Object Notation) serialization.
</p>
-Des:
##----------------------------------------
=Pkg: php5-ldap 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface to Lightweight Directory Access Protocol (LDAP).
</p>
-Des:
##----------------------------------------
=Pkg: php5-mbstring 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This extension provides multi-byte character safe string functions
and other utility functions such as conversion functions.
</p>
-Des:
##----------------------------------------
=Pkg: php5-mcrypt 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface to the mcrypt library, which supports a wide
variety of block algorithms.
</p>
-Des:
##----------------------------------------
=Pkg: php5-mhash 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions to create checksums, message digests, message
authentication codes, and more.
</p>
-Des:
##----------------------------------------
=Pkg: php5-mysql 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for access to MySQL database servers.
</p>
-Des:
##----------------------------------------
=Pkg: php5-ncurses 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module adds ncurses support (for CLI and GCI versions only).
</p>
-Des:
##----------------------------------------
=Pkg: php5-odbc 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module adds ODBC support.
</p>
-Des:
##----------------------------------------
=Pkg: php5-openssl 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module adds OpenSSL support.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pcntl 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module will attempt to implement all features related to process spawning and
control (fork(), waitpid(), signal(), WIF's, etc). This is extremley experimental,
with hope to become stable on most UNIX's. I greatly appreciate any feedback, fixes,
and or suggestions on how to improve/better implement
this functionality.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pdo 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP Data Objects - Data Access Abstraction
<ul>
<li>light-weight
</li><li>provides common API for common database operations
</li><li>keeps majority of PHP specific stuff in the PDO core (such as persistent
resource management); drivers should only have to worry about getting the
data and not about PHP internals.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: php5-pear 5.2.0 10 i586
=Sum: PHP Extension and Application Repository
+Des:
<!-- DT:Rich -->
<p>PEAR is a code repository for PHP extensions and PHP library code
similar to TeX's CTAN and Perl's CPAN. This package provides an access
to the repository.
</p><p>
See http://pear.php.net/manual/ for more datails.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pgsql 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for access to PostgreSQL database servers.
It includes both traditional pgsql and pdo_pgsql drivers.
</p>
-Des:
##----------------------------------------
=Pkg: php5-posix 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module allows to use POSIX-like functions in PHP.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pspell 5.2.0 10 i586
=Sum: PHP5 pspell extension
+Des:
<!-- DT:Rich -->
<p>PHP interface to the aspell, which provides spell checking functionality.
</p>
-Des:
##----------------------------------------
=Pkg: php5-shmop 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions to read, write, create and delete
UNIX shared memory segments.
</p>
-Des:
##----------------------------------------
=Pkg: php5-snmp 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for SNMP.
</p>
-Des:
##----------------------------------------
=Pkg: php5-soap 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module provides SOAP support.
</p><p>
SOAP extension can be used to write SOAP Servers and Clients. It supports
subsets of SOAP 1.1, SOAP 1.2 and WSDL 1.1 specifications.
</p>
-Des:
##----------------------------------------
=Pkg: php5-sockets 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>A low-level interface to the socket communication functions
based on the popular BSD sockets, providing the possibility
to act as a socket server as well as a client.
This extension is experimental!
</p>
-Des:
##----------------------------------------
=Pkg: php5-sqlite 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This is an extension for the SQLite Embeddable SQL Database Engine.
http://www.sqlite.org/
</p><p>
SQLite is a C library that implements an embeddable SQL database engine.
Programs that link with the SQLite library can have SQL database access
without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server.
SQLite is the server. The SQLite library reads and writes directly to and from
the database files on disk.
</p><p>
This package includes sqlite and pdo_sqlite modules for sqlite version 2 and 3 respectively.
</p>
-Des:
##----------------------------------------
=Pkg: php5-sysvmsg 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module provides System V IPC support.
</p>
-Des:
##----------------------------------------
=Pkg: php5-sysvsem 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface for System V semaphores.
</p>
-Des:
##----------------------------------------
=Pkg: php5-sysvshm 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface for System V shared memory.
</p>
-Des:
##----------------------------------------
=Pkg: php5-tokenizer 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>The tokenizer functions provide an interface to the PHP tokenizer
embedded in the Zend Engine. Using these functions you may write
your own PHP source analyzing or modification tools without having
to deal with the language specification at the lexical level.
</p>
-Des:
##----------------------------------------
=Pkg: php5-wddx 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for Web Distributed Data Exchange.
</p>
-Des:
##----------------------------------------
=Pkg: php5-xmlrpc 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module adds XMLRPC-EPI support.
</p>
-Des:
##----------------------------------------
=Pkg: php5-xsl 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module adds new XSL support to PHP.
</p>
-Des:
##----------------------------------------
=Pkg: php5-zip 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Zip is an extension to create, modify and read zip files.
</p>
-Des:
##----------------------------------------
=Pkg: php5-zlib 5.2.0 10 i586
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions to read and write gzip (.gz) compressed files.
</p>
-Des:
##----------------------------------------
=Pkg: pia 3.95 25 i586
=Sum: Simple Movie Player
+Des:
<!-- DT:Rich -->
<p>pia is a simple movie player which can playback AVI and QuickTime movies
recorded by xawtv, motv, and streamer. Other movies might work as well.
</p>
-Des:
##----------------------------------------
=Pkg: pico 4.64N 1 i586
=Sum: A small, easy to use editor
+Des:
<!-- DT:Rich -->
<p>Pico is a simple, display-oriented text editor based on the Pine
message system composer. As with Pine, commands are displayed at
the bottom of the screen, and context-sensitive help is provided.
Characters are inserted into the text as they are typed.
</p>
-Des:
##----------------------------------------
=Pkg: pilot 4.64N 1 i586
=Sum: Simple file system browser
+Des:
<!-- DT:Rich -->
<p>Pilot is a simple, display-oriented file system browser
based on the Pine message system composer. As with Pine,
commands are displayed at the bottom of the screen, and
context-sensitive help is provided.
</p>
-Des:
##----------------------------------------
=Pkg: pilot-link 0.12.1 27 i586
=Sum: PalmPilot Link Utility (Backup, Uploading Tools, and more)
+Des:
<!-- DT:Rich -->
<p>This is a keen choice of cool tools for the PalmPilot user. It contains:
<ul>
<li>backup utility for Pilot data
</li><li>uploading and downloading tools (memo, for example)
</li><li>a simple addressbook
</li><li>utility for importing POP3 mailboxes and sending
through Sendmail
</li><li>set the Palm time from your computer
justintime.prc needs to be installed on your Palm
see http://www.klawitter.de/palm/justintime.html for more information.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: pilot-link-devel 0.12.1 27 i586
=Sum: PalmPilot Development Header Files
+Des:
<!-- DT:Rich -->
<p>This package contains the development headers that are used to build the
pilot-link package. It also includes the static libraries necessary to build
static pilot apps.
</p><p>
If you want to develop Palm Pilot synchronization applications, you will need to
install pilot-link-devel.
</p>
-Des:
##----------------------------------------
=Pkg: pine 4.64N 32 i586
=Sum: The Pine e-mail program
+Des:
<!-- DT:Rich -->
<p>A text-based, but menu-driven and thus easy-to-use e-mail program.
It is very customizable from easy(default) to very powerful(for powerusers)
thru it's internal config menu.
</p><p>
It has many features, e.g. from Color support, threading and an integrated help system.
</p>
-Des:
##----------------------------------------
=Pkg: pinentry 0.7.2 45 i586
=Sum: Collection of Simple PIN or Passphrase Entry Dialogs
+Des:
<!-- DT:Rich -->
<p>This is a collection of simple PIN or passphrase entry dialogs which
utilize the Assuan protocol as described by the Aegypten project.
</p>
-Des:
##----------------------------------------
=Pkg: pinentry-gtk2 0.7.2 1 i586
=Sum: Collection of Simple PIN or Passphrase Entry Dialogs
+Des:
<!-- DT:Rich -->
<p>This is a collection of simple PIN or passphrase entry dialogs which
utilize the Assuan protocol as described by the Aegypten project.
</p>
-Des:
##----------------------------------------
=Pkg: pinentry-qt 0.7.2 1 i586
=Sum: Collection of Simple PIN or Passphrase Entry Dialogs
+Des:
<!-- DT:Rich -->
<p>This is a collection of simple PIN or passphrase entry dialogs which
utilize the Assuan protocol as described by the Aegypten project.
</p>
-Des:
##----------------------------------------
=Pkg: pinepg 1.02 214 i586
=Sum: A Pine filter for GnuPG to allow secure handling of e-mail
+Des:
<!-- DT:Rich -->
<p>Pine Privacy Guard is a small perl script to interface Pine and GnuPG for
the secure exchange of e-mail. It allows Pine users to conveniently:
<ul>
<li>Encrypt e-mail.
</li><li>Decrypt e-mail.
</li><li>Clear-sign e-mail.
</li><li>Verify clear-signed e-mail.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: pinfo 0.6.8 34 i586
=Sum: Lynx-style Info Browser
+Des:
<!-- DT:Rich -->
<p>Pinfo is a curses based, Lynx-style info browser.
</p>
-Des:
##----------------------------------------
=Pkg: pingus 0.6.0 319 i586
=Sum: A Lemmings Clone
+Des:
<!-- DT:Rich -->
<p>This game is not completely finished and there are not very many
playable levels, but the basic game engine is ready. The game,
in its current state, should be enough for a few hours of fun.
</p>
-Des:
##----------------------------------------
=Pkg: pixmp 2.6 1058 i586
=Sum: XPM Pixel Editor for the X Window System
+Des:
<!-- DT:Rich -->
<p>Pixmap is a program which enables you to edit XPM-files (colour bitmaps).
You can use them with every commonly used iconmanager and even incorporate them
in your own desktop environment.
</p>
-Des:
##----------------------------------------
=Pkg: pkgconfig 0.20 32 i586
=Sum: A library management system
+Des:
<!-- DT:Rich -->
<p>The pkg-config program is used to retrieve information about installed
libraries in the system. It is typically used to compile and link
against one or more libraries.
</p>
-Des:
##----------------------------------------
=Pkg: planmaker 2006.11.17 3 i586
=Sum: Powerful, yet easy-to-use spreadsheet
+Des:
<!-- DT:Rich -->
<p>Some Key Features of planmaker:
</p><p>
o Powerful, yet easy-to-use multi-platform spreadsheet
</p><p>
o Available for Windows, Pocket PCs, and Linux
</p><p>
o Excellent Microsoft Excel 5.0, 95, 97, 2000, XP, and 2003 filter
</p><p>
o Over 300 worksheet functions
</p><p>
o Powerful chart module
</p><p>
o Create drawings, flowcharts, etc. right inside your worksheets
</p><p>
o Outliner
</p><p>
o Password protection of worksheets/workbooks/whole documents
</p><p>
o Unlimited undo/redo
</p><p>
o Spell-checker for 16 languages, hyphenation (within text frames) in 36
languages
</p>
-Des:
##----------------------------------------
=Pkg: planner 0.14.1 22 i586
=Sum: Project Management Application for GNOME
+Des:
<!-- DT:Rich -->
<p>Planner is a free project management application, maintained
by Imendio.
</p><p>
If you want to contribute to the project, please subscribe
to the Planner development mailing list. Send an e-mail to
"planner-dev-request@lists.imendio.com" with the word "subscribe"
in the body of the message.
</p><p>
There is a mailing list archive available at
http://lists.imendio.com/pipermail/planner-dev/
</p><p>
There is also a #planner IRC channel on irc.gnome.org.
</p>
-Des:
##----------------------------------------
=Pkg: planner-devel 0.14.1 22 i586
=Sum: Project Management Application for GNOME
+Des:
<!-- DT:Rich -->
<p>Planner is a free project management application, maintained
by Imendio.
</p><p>
If you want to contribute to the project, please subscribe
to the Planner development mailing list. Send an e-mail to
"planner-dev-request@lists.imendio.com" with the word "subscribe"
in the body of the message.
</p><p>
There is a mailing list archive available at
http://lists.imendio.com/pipermail/planner-dev/
</p><p>
There is also a #planner IRC channel on irc.gnome.org.
</p>
-Des:
##----------------------------------------
=Pkg: plib 1.8.4 41 i586
=Sum: A collection of useful Game libraries
+Des:
<!-- DT:Rich -->
<p>Plib contains a selection of libraries, that can be helpful for
3D game programming. It contains the following libraries:
</p><p>
o JS - A Joystick interface.
</p><p>
o PUI - A simple GUI built on top of OpenGL
</p><p>
o SG - Some Standard Geometry functions
</p><p>
o SL - A Games-oriented Sound Library
</p><p>
o SSG - A Simple Scene Graph API built on top of OpenGL
</p>
-Des:
##----------------------------------------
=Pkg: plotutils 2.5 25 i586
=Sum: The GNU Plotting Utilities
+Des:
<!-- DT:Rich -->
<p>The GNU plotting utilities consist of seven command line programs:
the graphics programs `graph', `plot', `tek2plot', and `plotfont', and
the mathematical programs `spline', `ode', and `double'. GNU `libplot' is distributed
with these programs; it is the library on which the graphics
programs are based. `Libplot' is a function library for
device-independent two-dimensional vector graphics, including vector
graphics animations under the X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: plptools 0.16 20 i586
=Sum: The Psion Link Protocol and Tools
+Des:
<!-- DT:Rich -->
<p>The plptools package consists of 2 daemons and a program to connect to Psion Series 3 and 5 filesystems.
Ncpd connects to the Psion over the serial port.
Plpftp is an ftp-like program.
Plpnfsd connects you to your Psion over an nfs-like connection.
</p>
-Des:
##----------------------------------------
=Pkg: plptools-kde 0.16 20 i586
=Sum: Psion Support for KDE
+Des:
<!-- DT:Rich -->
<p>This package provides support for a new protocol prefix "psion:/" for
KDE. Any KDE application which uses KDE-conforming URLs, can access
files on the Psion. Furthermore, a plug-in for Konqueror's file-properties
dialog provides access to the Psion's proprietary file attributes and information
about the Psion's drives as well as generic machine information.
</p>
-Des:
##----------------------------------------
=Pkg: pm-utils 0.20.0.20061114 5 i586
=Sum: Tools to suspend and hibernate computers.
+Des:
<!-- DT:Rich -->
<p>pm-utils provide simple shell command line tools to suspend and hibernate computers that can be used to run vendor or distro supplied scripts on suspend and resume.
</p>
-Des:
##----------------------------------------
=Pkg: pmidi 1.6.0 116 i586
=Sum: A Command Line MIDI Player for ALSA
+Des:
<!-- DT:Rich -->
<p>pmidi is a command line MIDI player for ALSA.
</p>
-Des:
##----------------------------------------
=Pkg: pmtools 20060606 21 i586
=Sum: ACPI Debugging Tools
+Des:
<!-- DT:Rich -->
<p>This is a set of tools to display your BIOS ACPI tables.
</p>
-Des:
##----------------------------------------
=Pkg: po-utils 0.5 819 i586
=Sum: Free PO Utilities
+Des:
<!-- DT:Rich -->
<p>A collection of tools for handling PO files.
</p>
-Des:
##----------------------------------------
=Pkg: poppler 0.5.4 20 i586
=Sum: PDF Rendering Library
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg
of Glyph and Cog, LLC. The purpose of forking xpdf is twofold.
First, to provide PDF rendering functionality as a shared
library to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases. In turn, all distributions must package and release
new versions of these xpdf based viewers. It is safe to say that
there is a lot of duplicated effort with the current situation. Even if
poppler in the short term introduces yet another xpdf-derived code
base to the world, it is hoped that over time these applications will
adopt poppler. After all, only one application needs to use poppler
to break even.
</p><p>
Second, libpoppler intends to move forward in a number of areas
that do not fit within the goals of xpdf. By design, xpdf depends on
very few libraries and runs on a wide range of X-based platforms. This
is a strong feature and reasonable design goal. However, poppler
intends to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments. One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system in a standardized and well understood
way. Another example is cairo, which provides high quality 2D
rendering. See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: poppler-devel 0.5.4 20 i586
=Sum: PDF rendering library
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg
of Glyph and Cog, LLC. The purpose of forking xpdf is twofold.
First, we want to provide PDF rendering functionality as a shared
library, to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base, and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases. In turn, all distributions must package and release
new version of these xpdf based viewers. It's safe to say that
there's a lot of duplicated effort with the current situation. Even if
poppler in the short term introduces yet another xpdf derived code
base to the world, we hope that over time these applications will
adopt poppler. After all, we only need one application to use poppler
to break even.
</p><p>
Second, we would like to move libpoppler forward in a number of areas
that doesn't fit within the goals of xpdf. By design, xpdf depends on
very few libraries and runs a wide range of X based platforms. This
is a strong feature and reasonable design goal. However, with poppler
we would like to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments. One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system, in a standardized and well understood
way. Another example is cairo, which provides high quality 2D
rendering. See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: poppler-glib 0.5.4 20 i586
=Sum: PDF rendering library - a glib wrapper
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg
of Glyph and Cog, LLC. The purpose of forking xpdf is twofold.
First, we want to provide PDF rendering functionality as a shared
library, to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base, and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases. In turn, all distributions must package and release
new version of these xpdf based viewers. It's safe to say that
there's a lot of duplicated effort with the current situation. Even if
poppler in the short term introduces yet another xpdf derived code
base to the world, we hope that over time these applications will
adopt poppler. After all, we only need one application to use poppler
to break even.
</p><p>
Second, we would like to move libpoppler forward in a number of areas
that doesn't fit within the goals of xpdf. By design, xpdf depends on
very few libraries and runs a wide range of X based platforms. This
is a strong feature and reasonable design goal. However, with poppler
we would like to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments. One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system, in a standardized and well understood
way. Another example is cairo, which provides high quality 2D
rendering. See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: poppler-qt 0.5.4 20 i586
=Sum: PDF rendering library - a qt wrapper
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg
of Glyph and Cog, LLC. The purpose of forking xpdf is twofold.
First, we want to provide PDF rendering functionality as a shared
library, to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base, and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases. In turn, all distributions must package and release
new version of these xpdf based viewers. It's safe to say that
there's a lot of duplicated effort with the current situation. Even if
poppler in the short term introduces yet another xpdf derived code
base to the world, we hope that over time these applications will
adopt poppler. After all, we only need one application to use poppler
to break even.
</p><p>
Second, we would like to move libpoppler forward in a number of areas
that doesn't fit within the goals of xpdf. By design, xpdf depends on
very few libraries and runs a wide range of X based platforms. This
is a strong feature and reasonable design goal. However, with poppler
we would like to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments. One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system, in a standardized and well understood
way. Another example is cairo, which provides high quality 2D
rendering. See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: popt 1.7 304 i586
=Sum: A C library for parsing command line parameters
+Des:
<!-- DT:Rich -->
<p>Popt is a C library for parsing command line parameters. Popt
was heavily influenced by the getopt() and getopt_long() functions.
It improves on them by allowing more powerful argument expansion.
Popt can parse arbitrary argv[] style arrays and automatically set
variables based on command line arguments. Popt allows command
line arguments to be aliased via configuration files and includes
utility functions for parsing arbitrary strings into argv[] arrays
using shell-like rules.
</p>
-Des:
##----------------------------------------
=Pkg: popt-devel 1.7 304 i586
=Sum: C Library for Parsing Command Line Parameters
+Des:
<!-- DT:Rich -->
<p>Popt is a C library for parsing command line parameters. Popt
was heavily influenced by the getopt() and getopt_long() functions,
but it improves on them by allowing more powerful argument expansion.
Popt can parse arbitrary argv[] style arrays and automatically set
variables based on command line arguments. Popt allows command
line arguments to be aliased via configuration files and includes
utility functions for parsing arbitrary strings into argv[] arrays
using shell-like rules.
</p>
-Des:
##----------------------------------------
=Pkg: portaudio 19 114 i586
=Sum: Portable Real-Time Audio Library
+Des:
<!-- DT:Rich -->
<p>PortAudio is a portable audio I/O library designed for cross-platform
support of audio. It uses a callback mechanism to request audio processing.
Audio can be generated in various formats, including 32 bit floating point,
and will be converted to the native format internally.
</p>
-Des:
##----------------------------------------
=Pkg: portmap 5beta 768 i586
=Sum: A program that manages RPC connections
+Des:
<!-- DT:Rich -->
<p>A portmapper that manages RPC connections, which are used by protocols like
NFS and NIS.
</p><p>
This version is compiled with tcp_wrapper support.
</p>
-Des:
##----------------------------------------
=Pkg: poster 20020826 184 i586
=Sum: Tool for printing posters over multiple pages
+Des:
<!-- DT:Rich -->
<p>This program scales a PostScript page to a given size (a poster).
The output can be tiled on multiple sheets, and output
media size can be chosen independently.
Each tile (sheet) of a will bear cropmarks and slightly overlapping
image for easier poster assembly.
In principle it requires the input file to adhere to 'eps'
(encapsulated postscript) conventions but it will work for many
'normal' postscript files as well.
</p>
-Des:
##----------------------------------------
=Pkg: postfix 2.3.2 28 i586
=Sum: A fast, secure, and flexible mailer
+Des:
<!-- DT:Rich -->
<p>Postfix aims to be an alternative to the widely-used sendmail program.
</p>
-Des:
##----------------------------------------
=Pkg: postgresql 8.1.5 13 i586
=Sum: Basic Clients and Utilities for PostgreSQL
+Des:
<!-- DT:Rich -->
<p>PostgreSQL is an advanced object-relational database management system
that supports an extended subset of the SQL standard, including
transactions, foreign keys, subqueries, triggers, and user-defined types
and functions.
</p><p>
This package contains the basic utility and client programs necessary to maintain and work with local or remote PostgreSQL databases as well as manual pages for the SQL commands that PostgreSQL supports. Full HTML documentation for PostgreSQL can be found in the postgresql-docs package.
</p>
-Des:
##----------------------------------------
=Pkg: postgresql-contrib 8.1.5 13 i586
=Sum: Contributed Extensions and Additions to PostgreSQL
+Des:
<!-- DT:Rich -->
<p>PostgreSQL is an advanced object-relational database management system
that supports an extended subset of the SQL standard, including
transactions, foreign keys, subqueries, triggers, and user-defined types
and functions.
</p><p>
The postgresql-contrib package includes extensions and additions that are distributed along with the PostgreSQL sources, but are not (yet) officially part of the PostgreSQL core.
</p><p>
Documentation for the modules contained in this package can be found in
/usr/share/doc/packages/postgresql/contrib.
</p>
-Des:
##----------------------------------------
=Pkg: postgresql-devel 8.1.5 13 i586
=Sum: PostgreSQL development header files and libraries
+Des:
<!-- DT:Rich -->
<p>PostgreSQL is an advanced object-relational database management system
that supports an extended subset of the SQL standard, including
transactions, foreign keys, subqueries, triggers, and user-defined types
and functions.
</p><p>
This package contains the header files and libraries
needed to compile C applications which will directly interact
with a PostgreSQL database management server and the ECPG Embedded C
Postgres preprocessor. You need to install this package if you want to
develop applications in C which will interact with a PostgreSQL server.
</p>
-Des:
##----------------------------------------
=Pkg: postgresql-libs 8.1.5 13 i586
=Sum: Shared Libraries Required for PostgreSQL Clients
+Des:
<!-- DT:Rich -->
<p>PostgreSQL is an advanced object-relational database management system
that supports an extended subset of the SQL standard, including
This package provides the essential shared libraries for (almost) any
PostgreSQL client program or interface. You will need to install this package in order to use any other PostgreSQL package or any clients that need to connect to a PostgreSQL server.
</p>
-Des:
##----------------------------------------
=Pkg: postgresql-pl 8.1.5 15 i586
=Sum: The PL/Tcl, PL/Perl, and PL/Python Procedural Languages for PostgreSQL
+Des:
<!-- DT:Rich -->
<p>PostgreSQL is an advanced object-relational database management system
that supports an extended subset of the SQL standard, including
transactions, foreign keys, subqueries, triggers, and user-defined types
and functions.
</p><p>
This package contains the PL/Tcl, PL/Perl, and PL/Python
procedural languages for PostgreSQL. With these modules one can use
Perl, Python, and Tcl to write stored procedures, functions, and
triggers.
</p><p>
PostgreSQL also offers the built-in procedural language PL/SQL which is included in the postgresql-server package.
</p>
-Des:
##----------------------------------------
=Pkg: postgresql-server 8.1.5 13 i586
=Sum: The Programs Needed to Create and Run a PostgreSQL Server
+Des:
<!-- DT:Rich -->
<p>PostgreSQL is an advanced object-relational database management system
that supports an extended subset of the SQL standard, including
transactions, foreign keys, sub-queries, triggers, and user-defined types
and functions.
</p><p>
This package includes the programs needed to create
and run a PostgreSQL server, which will in turn allow you to create
and maintain PostgreSQL databases.
</p>
-Des:
##----------------------------------------
=Pkg: povray 3.6.1 36 i586
=Sum: Ray Tracer
+Des:
<!-- DT:Rich -->
<p>The Persistence of Vision Ray tracer creates three-dimensional,
photo-realistic images using a rendering technique called ray tracing.
It reads in a text file containing information describing the objects and
lighting in a scene and generates an image of that scene from the view
point of a camera also described in the text file. Ray tracing is not
a fast process by any means, (the generation of a complex image can
take several hours) but it produces very high quality images
with realistic reflections, shading, perspective, and other effects.
</p>
-Des:
##----------------------------------------
=Pkg: powersave 0.15.10 3 i586
=Sum: General Powermanagement daemon supporting APM and ACPI and CPU frequency scaling
+Des:
<!-- DT:Rich -->
<p>Powersave gives you control over the ACPI power buttons, three user defined battery states (warning, low, critical) and supports proper standby/suspend handling.
</p><p>
Additionally it could control the frequency of your processor if it supports SpeedStep(Intel) or PowerNow(AMD) technology. This will greatly reduce power consumption and heat production in your system.
</p><p>
Together with the kpowersave and yast2-power-management package it should be the preferred power managing application.
</p>
-Des:
##----------------------------------------
=Pkg: powersave-devel 0.15.10 3 i586
=Sum: Files needed for development with the powersave daemon or general powermanagement
+Des:
<!-- DT:Rich -->
<p>Files needed for development with the powersave daemon or general powermanagement.
</p>
-Des:
##----------------------------------------
=Pkg: powersave-libs 0.15.10 3 i586
=Sum: Shared libraries of the powersave daemon
+Des:
<!-- DT:Rich -->
<p>Shared libraries of the powersave daemon. A running powersave daemon is needed for full functionality of these libraries.
</p>
-Des:
##----------------------------------------
=Pkg: powertweak 0.99.5 78 i586
=Sum: A program to tune systems to their optimal performance
+Ins:
<!-- DT:Rich -->
<p>Powertweak is modifying very low level system parameters. It is
possible that some hardware may be pushed beyond its limits.
Use this at your own risk!
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Powertweak is a utility for tweaking your Linux system to peak performance.
It can tune the following parts of your system:
<ul>
<li>Tunes PCI devices to use optimal settings.
</li><li>Enables performance enhancing features.
</li><li>Kernel parameters
</li><li>CPU registers
</li><li>Chipset register settings
</li><li>Sony VAIO backlight
</li></ul>
To make use of all the features of this program, you need to have a Linux
kernel which supports the /proc/bus/pci interface.
</p>
-Des:
##----------------------------------------
=Pkg: powertweak-extra 0.99.5 78 i586
=Sum: Extra Plug-Ins for Powertweak
+Ins:
<!-- DT:Rich -->
<p>Powertweak is modifying very low level system parameters. It is
possible that some hardware may be pushed beyond its limits.
Use this at your own risk!
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>This package adds PCI device tuning and CPU tuning to
an existing Powertweak installation.
</p>
-Des:
##----------------------------------------
=Pkg: ppp 2.4.4 24 i586
=Sum: The Point to Point Protocol for Linux
+Des:
<!-- DT:Rich -->
<p>The ppp package contains the PPP (Point-to-Point Protocol) daemon,
pppd, additional PPP utilities, documentation, and sample files.
PPP provides a method for transmitting IP and IPX datagrams over
serial point-to-point links, for example over a modem.
The PPP daemon handles the details of setting up a PPP link including
configuring the network interface and performing the PPP negotiations.
If you want to install third party modules using distutils, you need to install <a href="pkg://python-devel">python-devel</a> package.
</p>
-Des:
##----------------------------------------
=Pkg: python-cairo 1.2.2 18 i586
=Sum: Python Bindings for cairo
+Des:
<!-- DT:Rich -->
<p>Python bindings for cairo.
</p>
-Des:
##----------------------------------------
=Pkg: python-curl 7.15.5.1 19 i586
=Sum: Python module interface to the cURL library
+Des:
<!-- DT:Rich -->
<p>PycURL is a Python module interface to the cURL library. PycURL can be used to fetch objects identified by an URL within a Python program.
</p>
-Des:
##----------------------------------------
=Pkg: python-curses 2.5 19 i586
=Sum: Python Interface to the (N)Curses Library
+Des:
<!-- DT:Rich -->
<p>An easy to use interface to the (n)curses CUI library. CUI stands for
Console User Interface.
</p>
-Des:
##----------------------------------------
=Pkg: python-dateutil 1.1 10 i586
=Sum: A Python datetime library
+Des:
<!-- DT:Rich -->
<p>The python dateutil module provides powerful extensions to the standard datetime module.
<ul>
<li>Computing of relative deltas (next month, next year, next monday, last week of month, etc)
</li><li>Computing of relative deltas between two given date and/or datetime objects
</li><li>Computing of dates based on very flexible recurrence rules, using a superset of the
iCalendar specification. Parsing of RFC strings is supported as well.
</li><li>Generic parsing of dates in almost any string format
</li><li>Timezone (tzinfo) implementations for tzfile(5) format files (/etc/localtime, /usr/share/zoneinfo, etc),
TZ environment string (in all known formats), iCalendar format files, given ranges (with help from relative deltas),
local machine timezone, fixed offset timezone, UTC timezone, and Windows registry-based time zones.
</li><li>Internal up-to-date world timezone information based on Olson's database.
</li><li>Computing of Easter Sunday dates for any given year, using Western, Orthodox or Julian algorithms
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: python-devel 2.5 19 i586
=Sum: Include Files and Libraries Mandatory for Building Python Modules.
+Des:
<!-- DT:Rich -->
<p>The Python programming language's interpreter can be extended with
dynamically loaded extensions and can be embedded in other programs.
</p><p>
This package contains header files, a static library, and development tools for building Python modules, extending the Python interpreter or embedding Python in applications.
</p><p>
This also includes the Python distutils, which were in the Python package up to version 2.2.2.
</p>
-Des:
##----------------------------------------
=Pkg: python-elementtree 1.2.6 41 i586
=Sum: Fast XML parser and writer
+Des:
<!-- DT:Rich -->
<p>The Element type is a simple but flexible container object, designed to store hierarchical data structures, such as simplified XML infosets, in memory. The element type can be described as a cross between a Python list and a Python dictionary.
</p>
-Des:
##----------------------------------------
=Pkg: python-fcgi 2000.09.21 183 i586
=Sum: Python FastCGI Module
+Des:
<!-- DT:Rich -->
<p>The fcgi.py Python module handles communication with the FastCGI
module from the Apache or Stronghold web server without using the
FastCGI developers kit. It will also work in a non-FastCGI
environment, (straight CGI).
</p>
-Des:
##----------------------------------------
=Pkg: python-gdbm 2.5 19 i586
=Sum: Python Interface to the GDBM Library
+Des:
<!-- DT:Rich -->
<p>An easy to use interface for GDBM databases. GDBM is the GNU
implementation of the standard Unix DBM databases.
</p>
-Des:
##----------------------------------------
=Pkg: python-gnome 2.16.0 15 i586
=Sum: Python bindings for GNOME
+Des:
<!-- DT:Rich -->
<p>PyGNOME is an extension module for python that gives you access to the
GNOME libraries. This means you have access to more widgets, simple
configuration interface, metadata support and many other features.
</p>
-Des:
##----------------------------------------
=Pkg: python-gnome-extras 2.14.2 35 i586
=Sum: Python bindings for GNOME
+Des:
<!-- DT:Rich -->
<p>GNOME-python-extras is an extension module for python that gives you access to more GNOME libraries. This means you have access to more widgets, simple configuration interface, metadata support and many other features.
</p>
-Des:
##----------------------------------------
=Pkg: python-gobject2 2.12.2 11 i586
=Sum: Python bindings for GObject
+Des:
<!-- DT:Rich -->
<p>Pygobjects is an extension module for python that gives you access to GLib's
GObjects.
</p>
-Des:
##----------------------------------------
=Pkg: python-gtk 2.10.3 11 i586
=Sum: Python bindings for the GTK+ widget set
+Des:
<!-- DT:Rich -->
<p>PyGTK is an extension module for python that gives you access to the GTK+
widget set. Just about anything you can write in C with GTK+ you can write
in python with PyGTK (within reason), but with all of python's benefits.
</p>
-Des:
##----------------------------------------
=Pkg: python-httplib2 0.2.0 10 i586
=Sum: A Python HTTP library
+Des:
<!-- DT:Rich -->
<p>A comprehensive python HTTP client library, which supports many features left
<p>Python bindings for ORBit. ORBit is the CORBA Object Request Broker used e.g. by GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: python-pam 0.4.2 38 i586
=Sum: Python bindings for PAM
+Des:
<!-- DT:Rich -->
<p>This release supports the core PAM API. There is still some missing functionality, but it should implement enough of the API for most needs.
There is not much in the way of documentation at this point. If you are familiar with the PAM API, a quick glance at the sample program should get you going.
</p>
-Des:
##----------------------------------------
=Pkg: python-pygame 1.7.1release 42 i586
=Sum: A Python Module for Interfacing with the SDL Multimedia Library
+Des:
<!-- DT:Rich -->
<p>Pygame is a Python wrapper module for the SDL multimedia library.
It contains Python functions and classes that allow you to use
SDL's support for playing CD-ROMs, audio and video output, and keyboard,
mouse and joystick input. Pygame also includes support for the Numerical
Python extension. Pygame is the successor to the pySDL wrapper project,
written by Mark Baker.
</p>
-Des:
##----------------------------------------
=Pkg: python-qt 3.5.5 29 i586
=Sum: Python Bindings for Qt
+Des:
<!-- DT:Rich -->
<p>Needed libraries for writing GUI applications using Qt in Python.
</p>
-Des:
##----------------------------------------
=Pkg: python-serial 2.2 35 i586
=Sum: Python Serial Port Extension
+Des:
<!-- DT:Rich -->
<p>This module encapsulates the access for the serial port. It provides backends
for Python running on Windows, Linux, BSD (possibly any POSIX compliant system) and Jython. The module named "serial" automatically selects the
appropriate backend.
</p>
-Des:
##----------------------------------------
=Pkg: python-sqlite 1.1.8 11 i586
=Sum: Python bindings for sqlite
+Des:
<!-- DT:Rich -->
<p>This packages allows you to use sqlite with python. sqlite is a simple database engine.
</p>
-Des:
##----------------------------------------
=Pkg: python-tk 2.5 19 i586
=Sum: TkInter - Python Tk Interface
+Des:
<!-- DT:Rich -->
<p>Python interface to Tk. Tk is the GUI toolkit that comes with Tcl.
The "xrpm" package uses this Python interface.
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted 2.4.0 12 i586
=Sum: Event-driven networking framework in Python
+Des:
<!-- DT:Rich -->
<p>A Development Tool
<hr>
Twisted is a framework, written in Python, for writing networked applications. It includes implementations of a number of commonly used network services such as a web server, an IRC chat server, a mail server, a relational database interface and an object broker. Developers can build applications using all of these services as well as custom services that they write themselves. Twisted also includes a user authentication system that controls access to services and provides services with user context information to implement their own security models.
</p><p>
Twisted provides important features needed for networking programming, both at the high and low levels:
</p><p>
Pluggable event loops allowing the developer to take advantage of platform-specific capabilities.
Abstractions of protocols and transports.
Through Twisted Spread, mechanisms for network encoding of data (in Python, Java, ELisp, and other languages), to a full-blown distributed object system.
</p><p>
An Integrated Environment
<hr>
Twisted is an integration point for network services that were previously unable to interoperate. Services within a Twisted server can communicate with each other and share information providing a very integrated programming environment that can re-use large amounts of infrastructure across multiple network mediums (such as chat, web, and mail).
</p><p>
As well as servers, Twisted supports several different kinds of clients and GUIs. This means that the client can re-use large portions of the server's code, improving test coverage and reliability while reducing code size.
</p><p>
An Application Suite
<hr>
Twisted is a collection of servers and clients, which can be used either by developers of new applications or directly. For example an easy to run web server is available out of the box as an application for the desktop user, but it is also a framework for developers to use.
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted-doc 2.4.0 12 i586
=Sum: Documentation for python-twisted, an event-driven networking framework in Python
+Des:
<!-- DT:Rich -->
<p>Twisted is an event-based framework for internet applications. It includes a
web server, a telnet server, a chat server, a news server, a generic client
and server for remote object access, and APIs for creating new protocols and
services. Twisted supports integration of the Tk, GTK+, GTK+ 2, Qt, Mac OS X,
or wxPython event loop with its main event loop. The Win32 event loop
is also supported. Twisted works with all Python 2.2 and 2.3 versions.
</p><p>
python-twisted-doc contains the documentation for python-twisted.
</p>
-Des:
##----------------------------------------
=Pkg: python-urlgrabber 3.1.0 18 i586
=Sum: A high-level cross-protocol url-grabber
+Des:
<!-- DT:Rich -->
<p>A high-level cross-protocol url-grabber for python supporting HTTP, FTP and file locations. Features include keepalive, byte ranges, throttling, authentication, proxies and more.
</p>
-Des:
##----------------------------------------
=Pkg: python-xml 2.5 19 i586
=Sum: A Python XML Interface
+Des:
<!-- DT:Rich -->
<p>The expat module is a Python interface to the expat XML parser.
Since Python2.x, it is part of the core Python distribution.
</p>
-Des:
##----------------------------------------
=Pkg: python-zopeinterface 3.0.1 38 i586
=Sum: Python library for API definitions through interfaces
+Des:
<!-- DT:Rich -->
<p>Interfaces are objects that specify (document) the external behavior of objects that "provide" them. An interface specifies behavior through:
<ul>
<li>informal documentation in a doc string
</li><li>attribute definitions
</li><li>invariants, which are conditions that must hold for objects that provide the interface
</li></ul>
This is a separate distribution of the zope.interface package used in Zope 3.
</p>
-Des:
##----------------------------------------
=Pkg: pyxml 0.8.4 38 i586
=Sum: XML Tools in Python
+Des:
<!-- DT:Rich -->
<p>The Python/XML distribution contains the basic tools required for processing XML data using the Python programming language. The distribution includes parsers and standard interfaces such as SAX and DOM, along with various other useful modules.
</p><p>
The package currently contains:
<ul>
<li>XML parsers: Pyexpat, xmlproc, and sgmlop
</li><li>SAX interface
</li><li>minidom, a DOM implementation
</li><li>4DOM and 4XPath from Fourthought
</li><li>Schema implementations: TREX
</li><li>Various utility modules and functions
</li><li>Documentation and example programs
</li></ul>
The code is being developed bazaar-style by contributors from the Python XML Special Interest Group, so please send comments or questions to <xml-sig@python.org>.
<p>QAMix is a configurable mixer for ALSA. The GUI description is defined in an XML file. Default interfaces for standard AC 97 cards and other cards are provided. QAMix can be controlled via MIDI. Any number of MIDI events can be bound to any mixer control.
</p>
-Des:
##----------------------------------------
=Pkg: qca 1.0 47 i586
=Sum: Qt Cryptographic Architecture
+Des:
<!-- DT:Rich -->
<p>This package provides a generic Qt cryptographic architecture, including a library and a plug-in for using all supported capabilities of openssl, like SSL/TLS, X509, RSA, SHA1, MD5, Blowfish, 3DES, and AES.
</p><p>
It can be extended by further plug-ins, for example, with qca-sasl for SASL support.
</p>
-Des:
##----------------------------------------
=Pkg: qemacs 0.3.1 237 i586
=Sum: Quick Emacs is a very small but powerful editor
+Des:
<!-- DT:Rich -->
<p>Full screen editor with an Emacs look and feel with all Emacs
common features: multi-buffer, multi-window, command mode,
universal argument, keyboard macros, config file with C like
syntax, minibuffer with completion and history.
</p><p>
Full UTF8 support, including bidirectional editing respecting the
Unicode bidi algorithm. Arabic and Indic scripts handling (in
progress).
</p><p>
WYSIWYG HTML/XML/CSS2 mode graphical editing. Also supports lynx
like rendering on VT100 terminals.
</p><p>
WYSIWYG DocBook mode based on XML/CSS2 renderer.
</p><p>
C mode: coloring with immediate update. Emacs like auto-indent.
</p><p>
Shell mode: colorized VT100 emulation so that your shell work
exactly as you expect. Compile mode with next/prev error.
</p><p>
Input methods for most languages, including Chinese (input methods
come from the Yudit editor).
</p><p>
Hexadecimal editing mode with insertion and block commands. Unicode
hexa editing of UTF8 files also supported.
</p><p>
X11 support. Support multiple proportional fonts at the same time
(as XEmacs). X Input methods supported. Xft extension supported for
anti aliased font display.
</p>
-Des:
##----------------------------------------
=Pkg: qjackconnect 0.0.3b 584 i586
=Sum: JACK Patchbay
+Des:
<!-- DT:Rich -->
<p>QJackConnect is a patchbay for the JACK Audio Connection Kit.
</p>
-Des:
##----------------------------------------
=Pkg: qjackctl 0.2.21 18 i586
=Sum: Qt-based interface to JACK
+Des:
<!-- DT:Rich -->
<p>Qjackctl is a simple Qt application to control the JACK sound server daemon
(http://jackit.sourceforge.net), for the Linux Audio Desktop infrastructure.
</p>
-Des:
##----------------------------------------
=Pkg: qnotify 0.5.2 37 i586
=Sum: Notifications for multiple workspaces
+Des:
<!-- DT:Rich -->
<p>QNotify is a small and windowmanager independent utility to inform you of events of any kind. When a specific event occurres, a small window will pop up showing a message or an image. The window does not take away the focus of any other application. Additionally, it stays on top of the Desktop and does not disappear when changing workspaces. The graphical look can be controlled by a lot of option like colors, geome- try, time shown, flickering or transparency.
</p><p>
The tool is especially designed for those who are not using KDE, but it is written with the framework QT from Trolltech and so it usable any windowmanager.
</p><p>
Since version 0.3, there is a daemon called qnotifyd which stays in background and keeps track of all shown windows. It manages the alignment of all qnotify windows and therefor avoids overlapping of events. For further information about the daemon look at man qnotifyd.
</p>
-Des:
##----------------------------------------
=Pkg: qnotify-libs 0.5.2 37 i586
=Sum: Library to be used by other applications for displaying nice popups
+Des:
<!-- DT:Rich -->
<p>LibQNotify is a library intended for use with other Qt or KDE applications. It provides an easy to use API for displaying highly configurable popups and even animations on the desktop. The commandline application QNotify supports all of its features.
</p>
-Des:
##----------------------------------------
=Pkg: qpopper 4.0.8 34 i586
=Sum: POP3 Mail Daemon from Qualcomm Inc.
+Des:
<!-- DT:Rich -->
<p>A mail server using the POP3 protocol. The daemon also supports the
more secure APOP protocol.
</p><p>
You must agree to the license in
/usr/share/doc/packages/qpopper/License.txt before you can use
qpopper.
</p><p>
After installation, activate the server in
the file /etc/inetd.conf or /etc/xinetd.d/qpopper.
</p>
-Des:
##----------------------------------------
=Pkg: qscintilla 1.65 40 i586
=Sum: C++ Editor Class Library
+Des:
<!-- DT:Rich -->
<p>QScintilla is a Qt port of Neil Hodgson's Scintilla C++ editor class.
</p><p>
This is a Qt port from the original Scintilla class (http://www.scintilla.org/).
</p><p>
This package is mainly used by eric, the Python IDE.
</p>
-Des:
##----------------------------------------
=Pkg: qt3 3.3.7 12 i586
=Sum: A library for developing applications with graphical user interfaces
+Des:
<!-- DT:Rich -->
<p>Qt is a program library for developing applications with graphical
user interfaces. It allows you to rapidly develop professional programs.
The Qt library is available not only for Linux but for a great number
of Unices and even for Windows. Thus it is possible to write
programs that may be easily ported to those platforms.
</p><p>
You need a license for using Qt with a non-GPL application, which can be acquired from sales@trolltech.com.
</p><p>
See /usr/share/doc/packages/qt3 for details about the new features
of the current Qt library!
</p>
-Des:
##----------------------------------------
=Pkg: qt3-devel 3.3.7 12 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>You need this package if you want to compile programs with Qt 3. It
contains the "Qt Crossplatform Development Kit 2". Under /usr/lib/qt3
you will find include files, documentation, precompiled examples, and a tutorial
for getting started with Qt.
</p><p>
You need a license for using Qt with a non-GPL application. A license can be acquired at sales@trolltech.com.
</p>
-Des:
##----------------------------------------
=Pkg: qt3-devel-tools 3.3.7 12 i586
=Sum: User Interface Builder and other tools (designer, assistant, linguist)
+Des:
<!-- DT:Rich -->
<p>The designer creates .ui files. The uic generates C++ code from these files.
The package also contains the Qt Assistant (Qt documentation browser) and the Qt Linguist (for translations).
</p>
-Des:
##----------------------------------------
=Pkg: qt3-examples 3.3.7 12 i586
=Sum: Programming Examples for Qt 3
+Des:
<!-- DT:Rich -->
<p>This package contains small executables with code to demonstrate Qt programming.
</p><p>
Have a look in /usr/share/doc/packages/qt3/examples/.
</p>
-Des:
##----------------------------------------
=Pkg: qt3-man 3.3.7 12 i586
=Sum: Qt 3 Man Pages
+Des:
<!-- DT:Rich -->
<p>This package contains all the man pages for all the Qt 3 classes.
</p>
-Des:
##----------------------------------------
=Pkg: qt3-mysql 3.3.7 12 i586
=Sum: MySQL Plug-In for Qt
+Des:
<!-- DT:Rich -->
<p>Plug-in for using the MySQL database with the generic Qt database interface.
</p>
-Des:
##----------------------------------------
=Pkg: qt3-postgresql 3.3.7 12 i586
=Sum: A PostgreSQL Plug-In for Qt
+Des:
<!-- DT:Rich -->
<p>A Plug-in for using the PostgreSQL database with the generic Qt database interface.
</p>
-Des:
##----------------------------------------
=Pkg: qt3-sqlite 3.3.7 12 i586
=Sum: SQLite Database Plug-In for Qt
+Des:
<!-- DT:Rich -->
<p>The Qt database supports SQLite with this plug-in.
(No configured and running daemon is required.)
</p>
-Des:
##----------------------------------------
=Pkg: qt3-unixODBC 3.3.7 12 i586
=Sum: A UnixODBC Plug-In for Qt
+Des:
<!-- DT:Rich -->
<p>A plug-in for using UnixODBC supported databases with the generic Qt database interface.
</p>
-Des:
##----------------------------------------
=Pkg: qtcurve-gtk2 0.45.3 18 i586
=Sum: QtCurve style for KDE
+Des:
<!-- DT:Rich -->
<p>This is the QtCurve style. QtCurve is available for both Gtk2+ and Qt3.
</p>
-Des:
##----------------------------------------
=Pkg: quagga 0.98.6 27 i586
=Sum: Free Routing Software (for BGP, OSPF and RIP, for example)
+Des:
<!-- DT:Rich -->
<p>Quagga is a routing software suite, providing implementations of OSPFv2, OSPFv3, RIP v1 and v2, RIPv3 and BGPv4 for Unix platforms, particularly FreeBSD and Linux and also NetBSD, to mention a few. Quagga is a fork of GNU Zebra which was developed by Kunihiro Ishiguro. The Quagga tree aims to build a more involved community around Quagga than the current centralised model of GNU Zebra.
</p>
-Des:
##----------------------------------------
=Pkg: quilt 0.46 14 i586
=Sum: A Tool for Working with Many Patches
+Des:
<!-- DT:Rich -->
<p>Quilt allows you to easily manage large numbers of patches by
keeping track of the changes each patch makes. Patches can be
applied, un-applied, refreshed, and more.
</p><p>
Quilt originally was based on Andrew Morton's patch scripts
found at http://www.zip.com.au/~akpm/linux/patches/.
</p>
-Des:
##----------------------------------------
=Pkg: quota 3.14 14 i586
=Sum: Disk Quota System
+Des:
<!-- DT:Rich -->
<p>The quota subsystem allows a system administrator to set soft and hard limits on used space and the number of inodes used for users and groups. The kernel must be compiled with disk quota support enabled (SUSE kernels have this support).
</p>
-Des:
##----------------------------------------
=Pkg: radiusclient 0.3.2 174 i586
=Sum: Radius Client Software
+Des:
<!-- DT:Rich -->
<p>Radius client provides some useful programs for doing authentication
and accounting via a (remote) radius server.
</p>
-Des:
##----------------------------------------
=Pkg: radvd 0.9 32 i586
=Sum: Router ADVertisement Daemon for IPv6
+Des:
<!-- DT:Rich -->
<p>RADVD is the Router ADVertisement Daemon. It is used for automated
configuration of IPv6 networks. Most people will not need this.
</p>
-Des:
##----------------------------------------
=Pkg: raptor 1.4.12 13 i586
=Sum: Raptor RDF Parser Toolkit
+Des:
<!-- DT:Rich -->
<p>Raptor is the RDF Parser Toolkit for Redland that provides
a set of standalone RDF parsers, generating triples from RDF/XML
or N-Triples.
</p>
-Des:
##----------------------------------------
=Pkg: rarpd 1.1 616 i586
=Sum: Reverse Address Resolution Protocol Daemon
+Des:
<!-- DT:Rich -->
<p>Rarpd listens on the Ethernet for broadcast packets asking
for reverse address resolution. These packets are sent by
hosts at boot time to find out their IP addresses.
</p>
-Des:
##----------------------------------------
=Pkg: rasmol 2.7.3.1 29 i586
=Sum: Molecular Graphics Visualization Tool
+Des:
<!-- DT:Rich -->
<p>RasMol is an X Window System tool intended for the visualization of
proteins and nucleic acids. It reads Brookhaven Protein Database (PDB)
files and interactively renders them in a variety of formats on either an
8-bit or 24/32-bit color display.
</p><p>
Examples are in /usr/lib/rasmol.
</p>
-Des:
##----------------------------------------
=Pkg: rcs 5.7 898 i586
=Sum: Revision Control System
+Des:
<!-- DT:Rich -->
<p>RCS, the Revision Control System, manages multiple revisions of files.
RCS can store, retrieve, log, identify, and merge revisions. It is
useful for files that are frequently revised, for example: programs,
documentation, graphics, and papers.
</p>
-Des:
##----------------------------------------
=Pkg: rdesktop 1.5.0 20 i586
=Sum: a Remote Desktop Protocol client
+Des:
<!-- DT:Rich -->
<p>rdesktop is an open source client for Windows NT Terminal Server and Windows 2000 Terminal Services, capable of natively speaking Remote Desktop Protocol (RDP) in order to present the user's NT desktop. Unlike Citrix ICA, no server extensions are required.
</p>
-Des:
##----------------------------------------
=Pkg: readline 5.1 55 i586
=Sum: The Readline Library
+Des:
<!-- DT:Rich -->
<p>The readline library is used by the Bourne Again Shell (bash, the
standard command interpreter) for easy editing of command lines. This
includes history and search functionality.
</p>
-Des:
##----------------------------------------
=Pkg: readline-devel 5.1 55 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: recode 3.6 522 i586
=Sum: A Character Set Converter
+Des:
<!-- DT:Rich -->
<p>This filter converts various character sets.
</p>
-Des:
##----------------------------------------
=Pkg: reiserfs 3.6.19 37 i586
=Sum: Reiser File System utilities
+Des:
<!-- DT:Rich -->
<p>This package includes utilities for making the file system (mkreiserfs), checking for
consistency (reiserfsck), and resizing (resize_reiserfs).
</p>
-Des:
##----------------------------------------
=Pkg: rekall 2.2.6 46 i586
=Sum: Universal Database Application
+Des:
<!-- DT:Rich -->
<p>Rekall is a programmable personal database management system (DBMS).
It supports form and report generation.
</p>
-Des:
##----------------------------------------
=Pkg: rekall-xbase 2.2.6 46 i586
=Sum: Rekall XBase Database Backend
+Des:
<!-- DT:Rich -->
<p>XBase database back-end for Rekall.
</p><p>
You do not need a running database server when using this plug-in.
</p>
-Des:
##----------------------------------------
=Pkg: resapplet 0.1.1 68 i586
=Sum: Resolution Switching Applet
+Des:
<!-- DT:Rich -->
<p>Resapplet is a simple utility that sits in the system notification area and
allows switching the resolution and refresh rate. It uses the
xrandr extensions to switch the resolution on-the-fly and user resolution
preferences to save the resolution.
</p><p>
It works in both GNOME and KDE, because it uses the system notification area.
</p>
-Des:
##----------------------------------------
=Pkg: resmgr 1.1.0_SVNr123 9 i586
=Sum: A program to track when users log in and out
+Des:
<!-- DT:Rich -->
<p>resmgr tracks when users log in and out via PAM module. It then executes commands based on configurable rules according to that login information.
</p>
-Des:
##----------------------------------------
=Pkg: rfb 0.6.1 507 i586
=Sum: heXoNet RFB (remote control for the X Window System)
+Des:
<!-- DT:Rich -->
<p>The heXoNet RFB Software package includes many different projects. The
goal of this package is to provide a comprehensive collection of
rfb-enabled tools and applications. One application, x0rfbserver, was,
and maybe still is, the only complete remote control solution for the
X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: rfbplaymacro 0.2.0 271 i586
=Sum: replays VNC macros
+Des:
<!-- DT:Rich -->
<p>rfbplaymacro replays VNC macros as created by rfbproxy to a VNC server.
</p>
-Des:
##----------------------------------------
=Pkg: rfbproxy 0.6.5 299 i586
=Sum: record or play back a VNC session
+Des:
<!-- DT:Rich -->
<p>rfbproxy is a simple proxy for VNC which allows recording of screen updates, key presses and mouse events for later replay.
</p>
-Des:
##----------------------------------------
=Pkg: rinetd 0.61 837 i586
=Sum: TCP Redirection Server
+Des:
<!-- DT:Rich -->
<p>rinetd redirects TCP connections from one IP address and port to another
address and port. rinetd is a single-process server which handles any number of connections
to the address or port pairs specified in the file /etc/rinetd.conf.
Because rinetd runs as a single process using nonblocking I/O, it is able
to redirect a large number of connections without a severe impact on
the machine. This makes it practical to run TCP services on machines
inside an IP masquerading firewall.
</p><p>
</p><p>
Note: rinetd can not redirect FTP because FTP requires more than one socket.
</p>
-Des:
##----------------------------------------
=Pkg: rlog 1.3.7 30 i586
=Sum: C++ Logging Library
+Des:
<!-- DT:Rich -->
<p>RLOG is a C++ library to manage message logging.
</p>
-Des:
##----------------------------------------
=Pkg: root-tail 1.2 40 i586
=Sum: Print Text Directly to the X Window System Root Window
+Des:
<!-- DT:Rich -->
<p>Tails a given file anywhere on your X Window System root window with a transparent background. It is customizable with regards to font, color, and more.
</p>
-Des:
##----------------------------------------
=Pkg: rpm 4.4.2 76 i586
=Sum: The RPM Package Manager
+Des:
<!-- DT:Rich -->
<p>RPM Package Manager is the main tool for managing the software packages
of the SuSE Linux distribution.
</p><p>
RPM can be used to install and remove software packages. With rpm, it is easy
to update packages. RPM keeps track of all these manipulations in a central
database. This way it is possible to get an overview of all installed
packages. RPM also supports database queries.
</p>
-Des:
##----------------------------------------
=Pkg: rpm-devel 4.4.2 76 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains the RPM C library and header files. These
development files will simplify the process of writing programs
which manipulate RPM packages and databases and are intended to make
it easier to create graphical package managers or any other tools
that need an intimate knowledge of RPM packages in order to function.
</p>
-Des:
##----------------------------------------
=Pkg: rpm-python 4.4.2 76 i586
=Sum: Python Bindings for Manipulating RPM Packages
+Des:
<!-- DT:Rich -->
<p>The rpm-python package contains a module that permits applications
written in the Python programming language to use the interface
supplied by RPM Package Manager libraries.
</p><p>
This package should be installed if you want to develop Python
programs that will manipulate RPM packages and databases.
</p>
-Des:
##----------------------------------------
=Pkg: rrdtool 1.2.15 25 i586
=Sum: A tool for data logging and analysis
+Des:
<!-- DT:Rich -->
<p>A tool to log and analyze data gathered from
all kinds of data sources. The data analysis
part of RRDtool is based on the ability to quickly
generate graphical representations of the data values
collected over a definable time period.
</p>
-Des:
##----------------------------------------
=Pkg: rsaref 2.0 541 i586
=Sum: RSA Reference Implementation
+Des:
<!-- DT:Rich -->
<p>RSAREF supports the following algorithms:
</p><p>
o RSA encryption and key generation [1], as defined by RSA
o DES (Data Encryption Standard) in cipher-block chaining mode
[5,6]
</p><p>
o Diffie-Hellman key agreement [7], as defined by PKCS #3 [8]
</p><p>
o DESX, RSA Data Security's efficient, secure DES enhancement
</p><p>
o Triple-DES, for added security with three DES operations
</p>
-Des:
##----------------------------------------
=Pkg: rsh 0.17 593 i586
=Sum: Clients for remote access commands (rsh, rlogin, and rcp)
+Des:
<!-- DT:Rich -->
<p>This package contains programs that allow users to run
commands on remote machines, to log in to other machines, and to copy files
between machines (rsh, rexec, rlogin, and rcp). These commands
use rhosts style authentication. For secure communication, SSH should
be used.
</p>
-Des:
##----------------------------------------
=Pkg: rsh-server 0.17 593 i586
=Sum: Servers for Remote Access Commands (rsh, rlogin, rcp)
+Des:
<!-- DT:Rich -->
<p>This package contains a set of server programs which allow users to run
commands on remote machines, log in to other machines, and copy files
between machines (rsh, rexec, rlogin, and rcp). All of these services are
run by inetd and configured using /etc/inetd.conf. PAM will be used for
authentication. SSH should be used for secure communication.
</p>
-Des:
##----------------------------------------
=Pkg: rsvg-sharp2 2.8.3 33 i586
=Sum: Mono bindings for rsvg
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for librsvg.
</p>
-Des:
##----------------------------------------
=Pkg: rsync 2.6.8 27 i586
=Sum: Replacement for RCP/mirror that has Many More Features
+Des:
<!-- DT:Rich -->
<p>rsync uses the "rsync algorithm" which provides a very fast method for
bringing remote files into sync. It does this by sending just the
differences in the files across the link, without requiring that both
sets of files be present at one of the ends of the link beforehand.
At first glance, this may seem impossible because the calculation of
diffs between two files normally requires local access to both
files.
</p><p>
A technical report describing the rsync algorithm is included with
this package.
</p>
-Des:
##----------------------------------------
=Pkg: ruby 1.8.5 18 i586
=Sum: An Interpreted Object-Oriented Scripting Language
+Des:
<!-- DT:Rich -->
<p>Ruby is an interpreted scripting language for quick and
easy object-oriented programming. It has many features for
processing text files and performing system management tasks (as in
Perl). It is simple, straight-forward, and extensible.
<ul>
<li>Ruby features:
</li><li>Simple Syntax
</li><li>*Normal* Object-Oriented features (class, method calls, for example)
</li><li>*Advanced* Object-Oriented features(Mix-in, Singleton-method, for example)
</li><li>Operator Overloading
</li><li>Exception Handling
</li><li>Iterators and Closures
</li><li>Garbage Collection
</li><li>Dynamic Loading of Object Files (on some architectures)
</li><li>Highly Portable (works on many UNIX machines; DOS, Windows, Mac, BeOS, and more)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: ruby-devel 1.8.5 18 i586
=Sum: Development files to link against Ruby.
+Des:
<!-- DT:Rich -->
<p>Development files to link against Ruby.
</p>
-Des:
##----------------------------------------
=Pkg: ruby-gettext 1.8.0.2 16 i586
=Sum: Native Language Support for Ruby
+Des:
<!-- DT:Rich -->
<p>Ruby-GetText-Package is a Native Language Support Library and Tools which is
modeled after GNU gettext package, but is not a wrapper of GNU GetText.
</p>
-Des:
##----------------------------------------
=Pkg: ruby-ldap 0.9.7 16 i586
=Sum: A Ruby Extension Library for Accessing the LDAP API
+Des:
<!-- DT:Rich -->
<p>Ruby/LDAP is an extension module for Ruby. It provides the interface to some LDAP libraries (for example, OpenLDAP, UMich LDAP, Netscape SDK, and ActiveDirectory). The common API for application development is described in RFC1823 and most libraries comply with it. Ruby/LDAP supports those libraries.
</p>
-Des:
##----------------------------------------
=Pkg: rubygems 0.9.0 29 i586
=Sum: The Ruby standard for publishing and managing third party libraries.
+Des:
<!-- DT:Rich -->
<p>RubyGems is the Ruby standard for publishing and managing third party libraries.
</p>
-Des:
##----------------------------------------
=Pkg: rug 7.1.100.0 34 i586
=Sum: Command Line Client for zmd
+Des:
<!-- DT:Rich -->
<p>rug module providing a command-line client (remote or local access) for the ZENworks Management Daemon on the ZLM client
</p>
-Des:
##----------------------------------------
=Pkg: rxp 1.4.4 32 i586
=Sum: XML Parser in C
+Des:
<!-- DT:Rich -->
<p>The current version of RXP supports XML 1.1, Namespaces 1.1, xml:id, and XML Catalogs. To use an XML Catalog, set the environment variable XML_CATALOG_FILES to a space-separated list of catalog files.
</p><p>
RXP was written by Richard Tobin at the Language Technology Group,
Human Communication Research Centre, University of Edinburgh.
</p><p>
A simple application (called rxp) is provided that parses and writes
XML data, optionally expanding entities, defaulting attributes, and
translating to a different output encoding.
</p><p>
Bug reports should be sent to richard@cogsci.ed.ac.uk.
</p>
-Des:
##----------------------------------------
=Pkg: rxvt-unicode 7.9 24 i586
=Sum: Rxvt X Terminal with Unicode Support
+Des:
<!-- DT:Rich -->
<p>rxvt-unicode is a clone of the well-known terminal emulator rxvt, modified to
store text in Unicode (either UCS-2 or UCS-4) and to use locale-correct input
and output. It also supports mixing multiple fonts at the same time, including
Xft fonts.
</p>
-Des:
##----------------------------------------
=Pkg: rzsz 0.12.20 871 i586
=Sum: X-, Y-, and Z-Modem Data Transfer Protocols
+Des:
<!-- DT:Rich -->
<p>rzsz allows you to use "sz filename" to send a file to your local system.
</p>
-Des:
##----------------------------------------
=Pkg: sabayon 2.12.4 30 i586
=Sum: Tool to maintain user profiles in a GNOME desktop
+Des:
<!-- DT:Rich -->
<p>Sabayon is a tool to help system administrators and users
change and maintain the default behaviour of the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: sabayon-admin 2.12.4 30 i586
=Sum: Graphical tools for Sabayon profile management
+Des:
<!-- DT:Rich -->
<p>The sabayon-admin package contains the graphical tools which a
sysadmin should use to manage Sabayon profiles.
</p>
-Des:
##----------------------------------------
=Pkg: sablot 1.0.2 32 i586
=Sum: XSL Processor
+Des:
<!-- DT:Rich -->
<p>Sablotron is an XSL processor fully implemented in C++. The excellent
Expat parser is used as the associated XML parser.
</p>
-Des:
##----------------------------------------
=Pkg: samba 3.0.23d 6 i586
=Sum: A SMB/CIFS File, Print, and Authentication Server
+Des:
<!-- DT:Rich -->
<p>Samba is a suite of programs that allows SMB/CIFS clients to use the Unix file space, printers, and authentication subsystem.
</p><p>
For a more detailed description, check the samba-doc package or the Samba.org Web page at http://www.Samba.org/.
</p><p>
This package expects its configuration file to be found in /etc/samba/smb.conf.
</p>
-Des:
##----------------------------------------
=Pkg: samba-client 3.0.23d 6 i586
=Sum: Samba Client Utilities
+Ins:
<!-- DT:Rich -->
<p>The configuration files are located in /etc/samba/. Additional documentation for the package is located in /usr/share/doc/packages/samba/. General information about the packaging of this Samba package can be found in README.SUSE and a fully commented configuration example in examples/smb.conf.SUSE.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>This package contains all programs that are needed to act as a Samba
client. This includes smbmount.
</p>
-Des:
##----------------------------------------
=Pkg: samba-pdb 3.0.23d 6 i586
=Sum: PDB-Modules
+Des:
<!-- DT:Rich -->
<p>The Samba PDB-Modules.
</p>
-Des:
##----------------------------------------
=Pkg: samba-vscan 0.3.6b 84 i586
=Sum: On-Access Virus Scanning with Samba
+Des:
<!-- DT:Rich -->
<p>samba-vscan provides on-access scanning of Samba shares with ClamAV, FRISK F-Prot, F-Secure AV, Kaspersky Anti-Virus, mks32, OAV ScannerDaemon, Sophos Sweep, Symantec AntiVirus Engine (via ICAP) and Trend Micro.
</p>
-Des:
##----------------------------------------
=Pkg: samba-winbind 3.0.23d 6 i586
=Sum: Winbind Daemon and Tool
+Des:
<!-- DT:Rich -->
<p>This is the winbind-daemon and the wbinfo-tool.
</p>
-Des:
##----------------------------------------
=Pkg: sane 1.0.18 34 i586
=Sum: SANE (Scanner Access Now Easy), the Scan Solution
+Des:
<!-- DT:Rich -->
<p>The software consists of SANE back-ends, "scanimage," and the "saned" daemon.
</p><p>
SANE back-ends are the actual hardware drivers for various scanner types.
Applications that use a back-end to access a scanner are referred to as SANE front-ends. This package contains the command line front-end "scanimage".
There are various graphical front-ends like "xscanimage" (package sane-frontends), XSane (package xsane), and the KDE front-end Kooka (package kdegraphics3-scan).
</p><p>
The "saned" daemon provides the service "sane-port" to access scanners that are connected to a server via network from client hosts that run the "net" back-end.
</p>
-Des:
##----------------------------------------
=Pkg: sane-frontends 1.0.14 44 i586
=Sum: SANE-frontends xscanimage, xcam, and scanadf
+Des:
<!-- DT:Rich -->
<p>xscanimage is a graphical scanner frontend for SANE. It can be invoked either directly from the command-line or through the GIMP image manipulation program.
</p><p>
xcam is a graphical camera frontend for SANE.
</p><p>
scanadf is a command-line frontend for SANE to control a scanner with an automatic document feeder (ADF).
</li><li>The merged GNOME and KDE databases, in the new format.
</li><li>The update-mime-database command, used to install new MIME data.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: sharutils 4.6.2 22 i586
=Sum: GNU shar utilities
+Des:
<!-- DT:Rich -->
<p>This is the set of GNU shar utilities.
</p><p>
'Shar' makes shell archives out of many files, preparing
them for transmission by electronic mail services. Use 'unshar'
to unpack shell archives after reception.
</p><p>
'Uuencode' prepares a file for transmission over an electronic channel
which ignores or otherwise mangles the eight bit (high order bit) of
bytes. 'Uudecode' does the converse transformation.
</p><p>
'Remsync' allows for remote synchronization of directory trees,
using e-mail. This part of sharutils is still alpha.
</p>
-Des:
##----------------------------------------
=Pkg: sidplay 2.0.9 33 i586
=Sum: Player for C64 Music Files
+Des:
<!-- DT:Rich -->
<p>This package allows you to play music from C64 games and demos on your PC.
</p><p>
You can find a comprehensive archive on the WWW at
http://www.hvsc.c64.org/
</p>
-Des:
##----------------------------------------
=Pkg: simias 1.4.6228.1 27 i586
=Sum: Collection-Oriented Data Storage
+Des:
<!-- DT:Rich -->
<p>Simias is a technology that will allow various types of data to be stored and related in what is known as a collection. Initially Simias is the underlying data store for the iFolder project, although it has potential to do much more.
</p>
-Des:
##----------------------------------------
=Pkg: simias-bonjour 1.4.6142.1 26 i586
=Sum: Peer-to-Peer addition to Simias
+Des:
<!-- DT:Rich -->
<p>Adds bonjour networking to simias
</p>
-Des:
##----------------------------------------
=Pkg: siproxd 0.5.13 24 i586
=Sum: A SIP masquerading proxy with RTP support
+Des:
<!-- DT:Rich -->
<p>Siprox is an proxy/masquerading daemon for the SIP protocol.
It handles registrations of SIP clients on a private IP network
and performs rewriting of the SIP message bodies to make SIP
connections possible via an masquerading firewall.
It allows SIP clients (like kphone, linphone) to work behind
an IP masquerading firewall or router.
</p>
-Des:
##----------------------------------------
=Pkg: sisctrl 0.0.20051202 35 i586
=Sum: SiS Display Control Panel
+Des:
<!-- DT:Rich -->
<p>Utility to set some display properties during server runtime.
</p>
-Des:
##----------------------------------------
=Pkg: skencil 0.6.17 44 i586
=Sum: Python-Based Vector Drawing Program
+Des:
<!-- DT:Rich -->
<p>Skencil (formerly known as Sketch) is an interactive vector drawing program for X. It is similar to XFig
or tgif. It is written almost completely in Python, an object-oriented
interpreted programming language.
</p>
-Des:
##----------------------------------------
=Pkg: skim 1.4.5 29 i586
=Sum: KDE integration for SCIM
+Des:
<!-- DT:Rich -->
<p>KDE integration for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: slang 2.0.5 32 i586
=Sum: A Library for Display Control
+Des:
<!-- DT:Rich -->
<p>A library with routines for display access. It is similar to ncurses, but
it has its own programming interface. Slang uses the entries in
/usr/lib/terminfo.
</p>
-Des:
##----------------------------------------
=Pkg: slang-devel 2.0.5 32 i586
=Sum: Library for Display Control - Development Package
+Des:
<!-- DT:Rich -->
<p>A library with routines for display access. It is similar to ncurses, but
it has its own programming interface. Slang uses the entries in
/usr/lib/terminfo.
</p>
-Des:
##----------------------------------------
=Pkg: slrn 0.9.8.1pl1 34 i586
=Sum: News Reader
+Des:
<!-- DT:Rich -->
<p>SLRN is a powerful, easy to use, and threaded Internet newsreader.
It is highly customizable, permitting redefinition of keys
and including a sophisticated macro language for further customization.
</p>
-Des:
##----------------------------------------
=Pkg: smart 0.42 43 i586
=Sum: Smart Package Manager
+Des:
<!-- DT:Rich -->
<p>The Smart Package Manager project has the ambitious objective of creating smart and portable algorithms for solving adequately the problem of managing software upgrading and installation. This tool works in all major distributions, and will bring notable advantages over native tools currently in use (APT, APT-RPM, YUM, URPMI, etc).
</p>
-Des:
##----------------------------------------
=Pkg: smart-gui 0.42 43 i586
=Sum: Graphical User Interface for smart
+Des:
<!-- DT:Rich -->
<p>GTK2 Graphical User Interface for the smart package manager.
</p>
-Des:
##----------------------------------------
=Pkg: smartlink-softmodem 2.9.10 75 i586
=Sum: SmartLink SoftModem for Linux
+Des:
<!-- DT:Rich -->
<p>This is SmartLink SoftModem for Linux version 2.9. It provides
=Sum: Smart Link Soft Modem for Linux kernel modules
+Des:
<!-- DT:Rich -->
<p>This is Smart Link Soft Modem for Linux version 2.9. It provides
a full-featured 56K Voice Fax Modem.
</p>
-Des:
##----------------------------------------
=Pkg: smartmontools 5.36.cvs20061025 8 i586
=Sum: Monitor for S.M.A.R.T. Disks and Devices
+Des:
<!-- DT:Rich -->
<p>SMARTmontools controls and monitors storage devices using the
Self-Monitoring, Analysis, and Reporting Technology System (S.M.A.R.T.)
built into ATA, SATA and SCSI Hard Drives. This is used to check
hard drive reliability and to predict drive failures. The suite contains
two utilities. The first, smartctl, is a command line utility designed to
perform simple S.M.A.R.T. tasks. The second, smartd, is a daemon that
periodically monitors smart status and reports errors to syslog. The
package is compatible with the ATA/ATAPI-3 to -7 specification. The
package is intended to incorporate as much "vendor specific" and
"reserved" information as possible about disk drives. The commands
man smartctl and man smartd will provide more information.
</p>
-Des:
##----------------------------------------
=Pkg: smpppd 1.59 38 i586
=Sum: SuSE Meta PPP Daemon
+Des:
<!-- DT:Rich -->
<p>The SuSE Meta PPP Daemon is the back-end for kinternet. It is required
for modem, ISDN, and DSL connections.
</p>
-Des:
##----------------------------------------
=Pkg: socat 1.5.0.0 21 i586
=Sum: Multipurpose relay for bidirectional data transfer
+Des:
<!-- DT:Rich -->
<p>socat is a relay for bidirectional data transfer between two independent data
channels. Each of these data channels may be a file, pipe, device (serial line
etc. or a pseudo terminal), a socket (UNIX, IP4, IP6 - raw, UDP, TCP), an SSL
socket, proxy CONNECT connection, a file descriptor (stdin etc.), the GNU line
editor, a program, or a combination of two of these.
</p>
-Des:
##----------------------------------------
=Pkg: solarwolf 1.5 67 i586
=Sum: An Action/Arcade Game
+Des:
<!-- DT:Rich -->
<p>The point of this game is to scramble through 48 levels of patterns,
collecting all the boxes. The part that makes it tricky is avoiding
the relentless hailstorm of fire coming at you from all directions.
</p>
-Des:
##----------------------------------------
=Pkg: solfege 3.6.3 16 i586
=Sum: Eartraining program
+Des:
<!-- DT:Rich -->
<p>Solfege is an eartraining program for X written in python, using the
GTK+ and GNOME libraries.
</p>
-Des:
##----------------------------------------
=Pkg: sound-juicer 2.16.1 28 i586
=Sum: Clean and Lean GNOME CD Ripper
+Des:
<!-- DT:Rich -->
<p>GStreamer-based CD ripping tool. Saves audio CDs to Ogg/vorbis.
</p>
-Des:
##----------------------------------------
=Pkg: sox 12.18.1 22 i586
=Sum: Sound Conversion Tools and Library
+Des:
<!-- DT:Rich -->
<p>SOX is intended to be the Swiss Army knife of sound
processing tools. It does many things, it just does not do them all well.
Sooner or later it will come in very handy.
SOX is really only usable day-to-day if you
hide the wacky options with one-line shell scripts.
</p>
-Des:
##----------------------------------------
=Pkg: spamassassin 3.1.6 15 i586
=Sum: SpamAssassin is an extensible email filter which is used to identify spam
+Des:
<!-- DT:Rich -->
<p>spamassassin adds a header line that shows if the mail has been
determined spam or not. This way, you can decide what to do with
the mail within the scope of your own filtering rules in your
MUA (Mail User Agent, your mail program) or your LDA (Local Delivery Agent).
</p><p>
See the files in the documentation directory
/usr/share/doc/packages/spamassassin/ for more information on how
to use the filter.
</p>
-Des:
##----------------------------------------
=Pkg: spandsp 0.0.3 10 i586
=Sum: A DSP library for Telephony and SoftFAX
+Des:
<!-- DT:Rich -->
<p>SpanDSP is a library of DSP functions for telephony, in the 8000 sample per second world of E1s, T1s, and higher order PCM channels. It contains low level functions, such as basic filters. It also contains higher level functions, such as cadenced supervisory tone detection, and a complete software FAX machine.
</p>
-Des:
##----------------------------------------
=Pkg: speex 1.1.99.1 13 i586
=Sum: An Open Source, Patent Free Speech Codec
+Des:
<!-- DT:Rich -->
<p>Speex is a patent free audio codec designed especially for voice
(unlike Vorbis which targets general audio) signals and providing
good narrowband and wideband quality. This project aims to be
complementary to the Vorbis codec.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite 3.3.8 14 i586
=Sum: Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is the server. The SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite-devel 3.3.8 14 i586
=Sum: Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server; SQLite is the server. The SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command-line tool or via any application which supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite-zmd 3.2.8 3 i586
=Sum: Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is the server. The SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite-zmd-devel 3.2.8 3 i586
=Sum: Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server; SQLite is the server. The SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command-line tool or via any application which supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite2 2.8.17 34 i586
=Sum: Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is the server. The SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite2-devel 2.8.17 34 i586
=Sum: Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is the server. The SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: squid 2.6.STABLE5 7 i586
=Sum: Squid WWW proxy server
+Del:
<!-- DT:Rich -->
<p>If you used Squid and you do not need the cache anymore, please delete
your cache directory (usually: /var/cache/squid) manually.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>The stable version of the Squid WWW Proxy Server.
</p><p>
Home page: http://www.squid-cache.org
</p>
-Des:
##----------------------------------------
=Pkg: src_vipa 2.0.3 32 i586
=Sum: Virtual Source IP address support for HA solutions
+Des:
<!-- DT:Rich -->
<p>This package provides very flexible means of source IP address selection
to arbitrary applications.
This is particularly useful for high availability setups,
where the dummy device holds a "VIPA" (virtual IP address).
Please read the /usr/share/doc/packages/src_vipa/README
and the manpage of src_vipa for further information.
</p>
-Des:
##----------------------------------------
=Pkg: sshfs 1.7 14 i586
=Sum: Filesystem client based on SSH file transfer protocol
+Des:
<!-- DT:Rich -->
<p>SSHFS is a filesystem client based on the SSH File Transfer Protocol.
Since most SSH servers already support this protocol it is very easy
to set up: i.e. on the server side there's nothing to do. On the
client side mounting the filesystem is as easy as logging into the
server with ssh.
</p>
-Des:
##----------------------------------------
=Pkg: star 1.5a70 33 i586
=Sum: POSIX.1-2001-Compliant Tar Implementation
+Des:
<!-- DT:Rich -->
<p>Star is a tar like archiver. TAR stands for Tape ARchiver.
Star is the fastest known implementation of a tar archiver.
</p><p>
Features:
<ul>
<li>FIFO to keep the tape streaming.
</li><li>remote tape support.
</li><li>accurate sparse files (if the OS supports it).
</li><li>pattern matcher to archive and extract a subset of files.
</li><li>user tailorable interface for comparing tar archives
against file trees.
</li><li>path names up to 1024 Bytes may be archived.
</li><li>stores and restores all 3 file times (even creation time).
With POSIX.1-2001 the times are in nanosecond granularity.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: startup-notification 0.8 39 i586
=Sum: Reference Implementation for the Startup-Notification Protocol
+Des:
<!-- DT:Rich -->
<p>Startup-notification contains a reference implementation of the startup-notification protocol.
</p>
-Des:
##----------------------------------------
=Pkg: startup-notification-devel 0.8 39 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: statserial 1.1 609 i586
=Sum: Helps to Debug Serial Lines
+Des:
<!-- DT:Rich -->
<p>Statserial displays a table of the signals on a standard
9-pin or 25-pin serial port and indicates the status of
the handshaking lines. It can be useful for debugging
problems with serial ports or modems.
</p>
-Des:
##----------------------------------------
=Pkg: strace 4.5.14 39 i586
=Sum: A utility to trace the system calls of a program
+Des:
<!-- DT:Rich -->
<p>With strace, you can trace the activity of a program. Information about any system calls the program makes and the signals it receives and processes can be seen. Child processes can also be tracked.
</p>
-Des:
##----------------------------------------
=Pkg: subversion 1.4.0 29 i586
=Sum: A Concurrent Versioning system similar to but better than CVS
+Des:
<!-- DT:Rich -->
<p>Subversion does the same thing CVS does (Concurrent Versioning System) but has
major enhancements compared to CVS.
</p><p>
http://subversion.tigris.org
</p>
-Des:
##----------------------------------------
=Pkg: subversion-perl 1.4.0 29 i586
=Sum: Allows Perl scripts to directly use Subversion repositories.
+Des:
<!-- DT:Rich -->
<p>Provides Perl (SWIG) support for Subversion.
</p>
-Des:
##----------------------------------------
=Pkg: subversion-python 1.4.0 29 i586
=Sum: Allows Python scripts to directly use Subversion repositories.
+Des:
<!-- DT:Rich -->
<p>Provides Pythong (SWIG) support for Subversion.
</p>
-Des:
##----------------------------------------
=Pkg: subversion-server 1.4.0 29 i586
=Sum: Apache server module for Subversion server
+Des:
<!-- DT:Rich -->
<p>The subversion-server package adds the Subversion server Apache module to
the Apache directories and configuration.
</p><p>
http://subversion.tigris.org
</p>
-Des:
##----------------------------------------
=Pkg: subversion-tools 1.4.0 29 i586
=Sum: Tools for Subversion
+Des:
<!-- DT:Rich -->
<p>Tools for Subversion
</p>
-Des:
##----------------------------------------
=Pkg: suck 4.3.0 563 i586
=Sum: Reading News Offline
+Des:
<!-- DT:Rich -->
<p>Suck is a program used to grab news from a remote NNTP news server
and bring it to a local machine, without having the remote server
do anything special.
</p>
-Des:
##----------------------------------------
=Pkg: sudo 1.6.8p12 40 i586
=Sum: Execute some commands as root
+Des:
<!-- DT:Rich -->
<p>Sudo is a command that allows users to execute some commands as
root. The /etc/sudoers file (edited with 'visudo') specifies which
users have access to sudo and which commands they can run. Sudo logs
all its activities to syslogd, so the system administrator can
keep an eye on things. Sudo asks for the password for initializing a
check period of a given time N (where N is defined at installation and
is set to 5 minutes by default).
</p>
-Des:
##----------------------------------------
=Pkg: sumf 0.2.4pre1 42 i586
=Sum: SCPM Universal Management Front-End
+Des:
<!-- DT:Rich -->
<p>SUMF is a graphical front-end to SCPM (System Configuration Profile Management).
</p>
-Des:
##----------------------------------------
=Pkg: supertux 0.1.3 45 i586
=Sum: Jump'n run game
+Des:
<!-- DT:Rich -->
<p>SuperTux is a classic 2D jump'n run sidescroller game in a similar style like the original SuperMario games.
</p>
-Des:
##----------------------------------------
=Pkg: susevbox 1.1 1564 i586
=Sum: A Configuration Tool for Vbox and an Answering Machine
+Des:
<!-- DT:Rich -->
<p>SuSEVboxConf configures vbox2.0 for your Linux system. SuSEVbox serves as
an answering machine.
</p>
-Des:
##----------------------------------------
=Pkg: suspend 0.50 6 i586
=Sum: A Set Of Tools To Support Sleep Modes
+Des:
<!-- DT:Rich -->
<p>A set of tools to support suspending notebooks, working around the
specific problems each machine has.
</p>
-Des:
##----------------------------------------
=Pkg: swig 1.3.29 29 i586
=Sum: Simplified Wrapper and Interface Generator
+Des:
<!-- DT:Rich -->
<p>SWIG is a compiler that attempts to make it easy to integrate C, C++, or Objective-C code with scripting languages including Perl, Tcl, and Python. In a nutshell, you give it a bunch of ANSI C/C++ declarations and it generates an interface between C and your favorite scripting language. However, this is only scratching the surface of what SWIG can do--some of its more advanced features include automatic documentation generation, module and library management, extensive customization options, and more.
</p>
-Des:
##----------------------------------------
=Pkg: sysconfig 0.60.4 3 i586
=Sum: The sysconfig scheme
+Des:
<!-- DT:Rich -->
<p>This package provides the SuSE system configuration scheme.
</p>
-Des:
##----------------------------------------
=Pkg: sysfsutils 2.1.0 19 i586
=Sum: System Utilities Package / Libsysfs
+Des:
<!-- DT:Rich -->
<p>This package's purpose is to provide a library for interfacing with the kernel's sys filesystem mounted at /sys. The libray was an attempt to create a stable interface to sysfs, but it failed. It is still provided for the current users, but no new software should use this library.
</p>
-Des:
##----------------------------------------
=Pkg: syslinux 3.31 16 i586
=Sum: Boot Loader for Linux
+Des:
<!-- DT:Rich -->
<p>SYSLINUX is a boot loader for the Linux operating system which operates off
an MS-DOS or Windows FAT file system. It is intended to simplify first-time
installation of Linux and for creation of rescue and other special purpose
boot disks.
</p>
-Des:
##----------------------------------------
=Pkg: syslog-ng 1.6.11 21 i586
=Sum: new-generation syslog-daemon
+Des:
<!-- DT:Rich -->
<p>syslog-ng is a "new-generation" syslogd (replacement) for Unix
and Unix-like systems. It tries to fill the gaps in the original
syslogd:
<ul>
<li>powerful configurability
</li><li>filtering based on message content
</li><li>portability
</li><li>better network forwarding
</li></ul>
The official home page of syslog-ng is:
http://www.balabit.hu/products/syslog-ng/
</p><p>
You can report problems via email to the syslog-ng mailing list
at <syslog-ng@lists.balabit.hu>. Support contracts and custom
development is available. Please write for details.
</p>
-Des:
##----------------------------------------
=Pkg: syslogd 1.4.1 584 i586
=Sum: The Syslog daemon
+Des:
<!-- DT:Rich -->
<p>The syslogd daemon is the general system logging daemon, which is
responsible for handling requests for syslog services.
</p><p>
This version of syslogd is similar to the standard Berkeley product,
but with a number of compatible extensions.
</p>
-Des:
##----------------------------------------
=Pkg: sysstat 6.0.2 36 i586
=Sum: Sar and Iostat Commands for Linux
+Des:
<!-- DT:Rich -->
<p>Sar and Iostat commands for Linux.
The sar command collects and reports system activity information. The iostat command reports CPU statistics and I/O statistics for TTY devices and disks. The information collected by sar and iostat can be saved in a binary file for future inspection. Both commands now support SMP machines when displaying CPU utilization.
</p>
-Des:
##----------------------------------------
=Pkg: sysvinit 2.86 47 i586
=Sum: SysV-Style init
+Des:
<!-- DT:Rich -->
<p>System V style init programs by Miquel van Smoorenburg that control
the booting and shutdown of your system. These support a number of
system runlevels, each one associated with a specific set of utilities. For
example, the normal system runlevel is 3, which starts a getty on
See the individual man pages for inittab, initscript, halt,
init, killproc, killall5, powerd, reboot, runlevel, shutdown, and telinit for more information.
</p>
-Des:
##----------------------------------------
=Pkg: t1lib 1.3.1 606 i586
=Sum: Adobe Type 1 Font Rasterizing Library
+Des:
<!-- DT:Rich -->
<p>T1lib is a library for generating character and string glyphs from
Adobe Type 1 fonts under UNIX. T1lib uses most of the code of the X Window System
rasterizer donated by IBM to the X Window System project. Some disadvantages
of the rasterizer included in the X Window System have been eliminated.
</p>
-Des:
##----------------------------------------
=Pkg: t1lib-devel 1.3.1 606 i586
=Sum: Development Libraries for T1lib
+Des:
<!-- DT:Rich -->
<p>This package provides the t1lib development environment (static libraries, header files, and more).
</p>
-Des:
##----------------------------------------
=Pkg: t1utils 1.26 285 i586
=Sum: a collection of simple type-1 font manipulation programs
+Des:
<!-- DT:Rich -->
<p>t1utils is a collection of simple type-1 font manipulation programs.
Together, they allow you to convert between PFA (ASCII) and PFB (binary)
formats, disassemble PFA or PFB files into human-readable form, and reassemble
them into PFA or PFB format. Additionally, you can extract font resources
from a Macintosh font file (ATM/Laserwriter) or create a Macintosh Type 1
font file from a PFA or PFB font.
</p>
-Des:
##----------------------------------------
=Pkg: taglib 1.4 47 i586
=Sum: C++ Library to Parse Metadata in Media Files
+Des:
<!-- DT:Rich -->
<p>libtag provides a C++ interface for reading additional data (stored in TAGs) from
MP3, Ogg Vorbis, and MPEG files.
</p>
-Des:
##----------------------------------------
=Pkg: talk 0.17 589 i586
=Sum: Talk Client for Chatting with Another User
+Des:
<!-- DT:Rich -->
<p>This package contains the talk client, which allows you to chat
with another user on a different system. Talk is a communication
program which copies lines from one terminal to that of
another user.
</p>
-Des:
##----------------------------------------
=Pkg: talk-server 0.17 589 i586
=Sum: Talk Daemon to Chat with Another User
+Des:
<!-- DT:Rich -->
<p>This package contains the talk daemon, which allows you to chat
with another user on a different system. Talk is a communication
program which copies lines from one terminal to the terminal of
another user.
</p>
-Des:
##----------------------------------------
=Pkg: tamil-gtk2im 2.2 89 i586
=Sum: Tamil99 Keyboard Input module for GTK2
+Des:
<!-- DT:Rich -->
<p>Tamil99 Keyboard Input module for GTK2
</p>
-Des:
##----------------------------------------
=Pkg: tar 1.15.1 42 i586
=Sum: GNU implementation of tar ( (t)ape (ar)chiver )
+Des:
<!-- DT:Rich -->
<p>This package normally also includes the program "rmt", which provides
remote tape drive control. Since there are compatible versions of 'rmt' in
either the 'star' package or the 'dump' package, we didn't put 'rmt' into this
package. If you are planning to use the remote tape features provided by tar you
have to also install the 'dump' or the 'star' package.
</p>
-Des:
##----------------------------------------
=Pkg: tcl 8.4.14 11 i586
=Sum: The Tcl Programming Language
+Des:
<!-- DT:Rich -->
<p>Tcl (Tool Command Language) is a very powerful but easy to learn dynamic programming language, suitable for a very wide range of uses, including web and desktop applications, networking, administration, testing and many more. Open source and business-friendly, Tcl is a mature yet evolving language that is truly cross platform, easily deployed and highly extensible.
</p><p>
For more information on Tcl see http://www.tcl.tk and http://wiki.tcl.tk .
</p>
-Des:
##----------------------------------------
=Pkg: tcl-devel 8.4.14 11 i586
=Sum: Header Files and C API Documentation for Tcl
+Des:
<!-- DT:Rich -->
<p>This package contains header files and documentation needed for writing Tcl extensions in compiled languages like C, C++, etc., or for embedding the Tcl interpreter in programs written in such languages.
</p><p>
This package is not needed for writing extensions or applications in the Tcl language itself.
</p>
-Des:
##----------------------------------------
=Pkg: tclplug 3.0.2 34 i586
=Sum: Tcl/Tk Plug-In for Netscape Navigator
+Des:
<!-- DT:Rich -->
<p>With this plug-in, download special Tcl/Tk scripts
(also known as tclets) from the Internet and execute them inside your browser
like Java applets.
</p><p>
Find the documentation in /opt/netscape/tclplug/2.0/doc.
</p>
-Des:
##----------------------------------------
=Pkg: tclx 8.4 363 i586
=Sum: TclX - Extended Tcl
+Des:
<!-- DT:Rich -->
<p>Extended Tcl is a superset of standard Tcl.
Extended Tcl has three basic functional areas:
A set of new commands, a Tcl shell (a Unix shell-style command
line and interactive environment), and a user-extensible library of
useful Tcl procedures, any of which can be automatically loaded on the
first attempt to execute it.
</p><p>
In addition, a detailed help system is available for Tcl/Tk: tclhelp.
</p>
-Des:
##----------------------------------------
=Pkg: tcpd 7.6 750 i586
=Sum: A security wrapper for TCP daemons
+Des:
<!-- DT:Rich -->
<p>This package contains a small daemon program that can
monitor and filter incoming requests for finger, ftp, telnet,
rlogin, rsh, exec, tftp, talk, and other network services.
</p>
-Des:
##----------------------------------------
=Pkg: tcpd-devel 7.6 750 i586
=Sum: Include Files and Libraries for the TCP wrapper library
+Des:
<!-- DT:Rich -->
<p>This package contains the library and header files, which
are necessary to compile and link programs against the
TCP wrapper library.
</p>
-Des:
##----------------------------------------
=Pkg: tcpdump 3.9.4 34 i586
=Sum: A Packet Sniffer
+Des:
<!-- DT:Rich -->
<p>This program can "read" all or only certain packets going over
the ethernet. It can be used to debug specific network problems.
</p>
-Des:
##----------------------------------------
=Pkg: tcsh 6.14.00 43 i586
=Sum: The C SHell
+Des:
<!-- DT:Rich -->
<p>Tcsh is an enhanced, but completely compatible, version of the Berkeley
UNIX C shell, csh(1). It is a command language interpreter usable
as an interactive login shell and a shell script command processor. It
includes a command-line editor, programmable word completion, spelling
correction, a history mechanism, job control, and a C-like syntax.
</p>
-Des:
##----------------------------------------
=Pkg: tdom 0.8.0 14 i586
=Sum: A XML/DOM/XPath/XSLT Implementation for Tcl
+Des:
<!-- DT:Rich -->
<p>tDOM combines high performance XML data processing with easy and powerful Tcl scripting functionality. tDOM should be one of the fastest ways to manipulate XML with a scripting language and uses very few memory (for example the DOM tree of the XML recommendation in XML (160K) needs only about 450K in memory).
</p>
-Des:
##----------------------------------------
=Pkg: te_ams 3.0 58 i586
=Sum: All about Ams-TeX
+Des:
<!-- DT:Rich -->
<p>This package provides AmS-TeX some parts of AmS-LaTeX, which is
released by the American Mathematical Society.
For using AmS-TeX, AmS-LaTeX, or their styles,
install this package.
</p>
-Des:
##----------------------------------------
=Pkg: te_cont 3.0 58 i586
=Sum: The conTeXt system depending on pdfTeX
+Des:
<!-- DT:Rich -->
<p>The conTeXt macro package is written in TeX and, depending
on the configuration, is able to use the pdf output format.
ConTeXt is free software, the license is given in
</p><p>
/usr/share/texmf/doc/context/base/licen-en.pdf
</p><p>
(best viewed with the Acrobat Reader).
</p>
-Des:
##----------------------------------------
=Pkg: te_dvilj 3.0 58 i586
=Sum: Printer drivers for LaserJets (obsolete)
+Des:
<!-- DT:Rich -->
<p>This package contains drivers for various LaserJets. In
most cases, these drivers are not used because, with the programs
dvips and ghostscript, not only the same print quality is reached,
but, due to the intermediate PostScript step, some very useful
graphical features are given.
</p>
-Des:
##----------------------------------------
=Pkg: te_eplai 3.0 58 i586
=Sum: An extended plain TeX version (not NTS)
+Des:
<!-- DT:Rich -->
<p>Eplain is an extension of plain TeX which adds some useful
features to plain TeX, e.g., footnotes, citations using BibTeX, and
some more.
</p>
-Des:
##----------------------------------------
=Pkg: te_kpath 3.0 58 i586
=Sum: The headers and library of the kpathsea tools
+Des:
<!-- DT:Rich -->
<p>The purpose of the kpathsea library is to return a file name from a list
of directories. This package provides the static library and the header
files for compiling and linking programs with kpathsea support.
For the normal use of TeX and LaTeX, this package is not required.
</p>
-Des:
##----------------------------------------
=Pkg: te_latex 3.0 58 i586
=Sum: All About LaTeX
+Des:
<!-- DT:Rich -->
<p>This package provides LaTeX. To be exact, LaTeX2e, and a huge amount
software for LaTeX. This package is required by most
(La)TeX documents.
</p>
-Des:
##----------------------------------------
=Pkg: te_mpost 3.0 58 i586
=Sum: All about MetaPost
+Des:
<!-- DT:Rich -->
<p>This package provides MetaPost, which is a program with a similar
macro language as MetaFont, but, in comparison to MetaFont, the output
is not a bitmap, but in PostScript.
</p><p>
If familiar with the language of MetaFont, this program will
provide an excellent tool for drawing. This can happens interactively,
with a file, or by an other program.
</p>
-Des:
##----------------------------------------
=Pkg: te_omega 3.0 58 i586
=Sum: Omega, an extended TeX/LaTeX version with unicode
+Des:
<!-- DT:Rich -->
<p>The Omega typesetting system, an extension of TeX, is designed for
typesetting of all the world's languages. It normally uses the
unicode character encoding standard as internal representation.
</p><p>
If this extension used together with the macro package LaTeX,
this version of Omega is called Lambda.
</p>
-Des:
##----------------------------------------
=Pkg: te_ptex 3.0 58 i586
=Sum: "The publishing TeX", Japanese-capable TeX/LaTeX by ASCII corporation
+Des:
<!-- DT:Rich -->
<p>"The publishing TeX", Japanese-capable TeX/LaTeX by ASCII corporation
</p>
-Des:
##----------------------------------------
=Pkg: te_web 3.0 58 i586
=Sum: The WEB tools for programming in WEB
+Des:
<!-- DT:Rich -->
<p>WEB is a programming language designed to force the programmer to
write the documentation during programming. For example, Donald Erwin Knuth has
written his typesetting program Tex in WEB.
</p><p>
The tools tangle and weave are used to produce the ready to compile
source code in Pascal and the documentation in TeX.
</p><p>
This package is not required for the use of TeX or LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: tellico 1.2.4 24 i586
=Sum: A book collection manager
+Des:
<!-- DT:Rich -->
<p>Tellico is an KDE application for keeping track of your collections.
It provides default templates for books, bibliographies, videos, music, coins, stamps, trading cards, comic books, and wines.
</p>
-Des:
##----------------------------------------
=Pkg: telnet 1.2 33 i586
=Sum: A client program for the telnet remote login protocol
+Des:
<!-- DT:Rich -->
<p>Telnet is an old protocol for logging into remote systems. It is
rarely used, since the transfer is not encrypted (ssh is mostly
used these days). The telnet client is often used for debugging
other network services. The command
</p><p>
telnet localhost 25
</p><p>
connects to the local smtp server, for example.
</p>
-Des:
##----------------------------------------
=Pkg: telnet-server 1.2 33 i586
=Sum: A Server Program for the Telnet Remote Login Protocol
+Des:
<!-- DT:Rich -->
<p>Telnet is a popular protocol for logging into remote systems. This
package provides the telnet daemon, which will allow remote logins
into this machine.
</p>
-Des:
##----------------------------------------
=Pkg: termcap 2.0.8 910 i586
=Sum: The Termcap Library
+Des:
<!-- DT:Rich -->
<p>The termcap library.
</p>
-Des:
##----------------------------------------
=Pkg: terminfo 5.5 42 i586
=Sum: A terminal descriptions database
+Des:
<!-- DT:Rich -->
<p>This is the terminfo reference database, maintained by Eric Raymond.
This database is the official successor to the 4.4BSD termcap file and
contains information about any known terminal. The ncurses library makes
use of this database to use terminals correctly. If you
just use the Linux console, xterm, and VT100, you probably will not need
this database -- a minimal /usr/share/terminfo tree for these terminals is
already included in the ncurses package.
</p>
-Des:
##----------------------------------------
=Pkg: testgart 0.1 221 i586
=Sum: Program for Testing AGPGART Support
+Des:
<!-- DT:Rich -->
<p>With 'testgart', you can check if your machine has agpgart support.
</p>
-Des:
##----------------------------------------
=Pkg: tetex 3.0 58 i586
=Sum: The Base System of teTeX
+Des:
<!-- DT:Rich -->
<p>After installing teTeX and the package te_latex, find a large selection of documentation
for TeX, LaTeX, and various layout styles in /usr/share/texmf/doc.
</p><p>
TeX (pronounced tech) is an interpreter for text formatting and was
developed by Donald E. Knuth. It works with control and macro
commands on a text file.
Working with TeX is similar to typesetting methods.
LaTeX or better LaTeX2e is a complex macro package that removes
the cryptical TeX interface and does most of the work for the user.
</p><p>
TeX uses special fonts produced by the MetaFont program.
Various printer drivers and an X11 viewer are also included in this package.
The teTeX package is based on the standard TeX package of Karl Berry,
which makes configuration much easier.
It is also possible to use PostScript fonts. A real PostScript printer is
required, however.
If the ghostscript (gs) package is installed, all drivers for
printing and viewing can use these fonts. Note, however, that the
fonts included in the ghostscript package are not identical
to Adobe's PostScript fonts. The copyright prohibits us from
including them on the CD.
</p><p>
Besides these features, there are the programs MakeIndex (for producing
indexes), BibTeX (for literature data processing), and the script xtexsh
(requires tcl/tk).
</p><p>
Note the differences between LaTeX2.09 and LaTeX2e.
LaTeX2e can process original LaTeX2.09 text, but
style files that require LaTeX2.09 internal macros may
not work correctly. Under /usr/share/texmf/doc/latex/base/,
find the documentation for LaTeX2e. New users
should review the documentation stored there.
</p><p>
The teTeX package from Thomas Esser includes a full
texmf tree, many programs (tex, dvips, etc.), shell script
configuration, and a big collection of documentations.
This package is simply configured by the script texconfig
and has multilanguage options.
</p><p>
Do not install this package together with ntex. ntex is not delivered in
SUSE Linux.
</p><p>
teTeX is not an upgrade or update for the ntex package.
</p>
-Des:
##----------------------------------------
=Pkg: texcad 2.4 1051 i586
=Sum: Drawing program for LaTeX pictures
+Des:
<!-- DT:Rich -->
<p>A really nice drawing program which is especially useful in
cooperation with LaTeX. Note the documentation and COPYRIGHT file
in /usr/share/doc/packages/texcad.
</p>
-Des:
##----------------------------------------
=Pkg: texinfo 4.8 43 i586
=Sum: Tools Needed to Create Documentation from Texinfo Sources
+Des:
<!-- DT:Rich -->
<p>Texinfo is a documentation system that uses a single source file to
produce both online information and printed output. Using Texinfo,
you can create a printed document with the normal features of a book,
including chapters, sections, cross-references, and indices. From the
same Texinfo source file, you can create a menu-driven, online info
file with nodes, menus, cross-references, and indices.
</p>
-Des:
##----------------------------------------
=Pkg: textmaker 2006.1.25 28 i586
=Sum: Efficient, powerful word processor from Softmaker Software GmbH
+Des:
<!-- DT:Rich -->
<p>Textmaker is an alternative, efficient and powerful word processor for Linux and
FreeBSD systems. It starts quickly and contains a huge amount of features. It is
extremely easy to use, compatible to MS Word formats and comes along in a modern
look-and-feel.
</p>
-Des:
##----------------------------------------
=Pkg: tftp 0.43 10 i586
=Sum: Trivial File Transfer Protocol (TFTP)
+Des:
<!-- DT:Rich -->
<p>The Trivial File Transfer Protocol (TFTP) is normally used only for
booting diskless workstations and for getting or saving network component
configuration files.
</p>
-Des:
##----------------------------------------
=Pkg: thinkeramik 3.2.1 57 i586
=Sum: Thin Keramik style for KDE
+Des:
<!-- DT:Rich -->
<p>This is a plain-looking modification of the Keramik style.
</p>
-Des:
##----------------------------------------
=Pkg: thinkeramik-style 3.2.1 57 i586
=Sum: Thin Keramik style for Qt
+Des:
<!-- DT:Rich -->
<p>This is a plain-looking modification of the Keramik style.
</p>
-Des:
##----------------------------------------
=Pkg: tidy 1.0 6 i586
=Sum: Utility to clean up and pretty-print HTML/XHTML/XML
+Des:
<!-- DT:Rich -->
<p>When editing HTML it's easy to make mistakes. Wouldn't it be nice if
there was a simple way to fix these mistakes automatically and tidy up
sloppy editing into nicely layed out markup? Well now there is! Dave
Raggett's HTML TIDY is a free utility for doing just that. It also works
great on the atrociously hard to read markup generated by specialized
HTML editors and conversion tools, and can help you identify where you
need to pay further attention on making your pages more accessible to
people with disabilities.
</p><p>
</p><p>
Tidy is able to fix up a wide range of problems and to bring to your
attention things that you need to work on yourself. Each item found is
listed with the line number and column so that you can see where the
problem lies in your markup. Tidy won't generate a cleaned up version
when there are problems that it can't be sure of how to handle. These
are logged as "errors" rather than "warnings".
</p>
-Des:
##----------------------------------------
=Pkg: tiff 3.8.2 25 i586
=Sum: Tools for Converting from and to the Tiff Format
+Des:
<!-- DT:Rich -->
<p>This package contains the library and support programs for the TIFF image format.
</p>
-Des:
##----------------------------------------
=Pkg: tightvnc 1.2.9 224 i586
=Sum: A virtual X-Window System server
+Des:
<!-- DT:Rich -->
<p>With vnc, start a virtual X Windows System server and get
access to it from different machines with the vnc-viewer. You can
change the machine without terminating your session.
</p><p>
The viewer and server are also available for Windows -- they allow access
to vnc under Windows. You can find it under /dosutils/vnc on the
first CD or DVD.
</p>
-Des:
##----------------------------------------
=Pkg: timezone 2.5 25 i586
=Sum: Timezone descriptions
+Des:
<!-- DT:Rich -->
<p>These are configuration files that describe available
time zones. You can select an appropriate time zone
for your system with YaST.
</p>
-Des:
##----------------------------------------
=Pkg: timidity 2.13.2 46 i586
=Sum: Software Synthesizer and MIDI Player
+Des:
<!-- DT:Rich -->
<p>TiMidity plays MIDI files without external MIDI instruments and converts
MIDI files to WAV using GUS/patch and SoundFont for voice data.
</p>
-Des:
##----------------------------------------
=Pkg: tix 8.1.4 112 i586
=Sum: Tools for tk
+Des:
<!-- DT:Rich -->
<p>The Tix library has, by far, the greatest collection of widgets
for programming with Tcl/Tk. Highlights include: hierarchical
list box, directory list/tree view, spreadsheet, tabular
list box, combo box, Motif style file select box, MS Windows style
file select box, paned window, note book, spin control widget
and many more. With these new widgets, your applications will
look great and interact with your users in intuitive ways.
</p>
-Des:
##----------------------------------------
=Pkg: tk 8.4.14 11 i586
=Sum: Graphical User Interface Toolkit for Tcl
+Des:
<!-- DT:Rich -->
<p>Tk is a graphical user interface toolkit that takes developing desktop applications to a higher level than conventional approaches. Tk is the standard GUI not only for Tcl, but for many other dynamic languages, and can produce rich, native applications that run unchanged across Windows, Mac OS X, Linux and more.
</p>
-Des:
##----------------------------------------
=Pkg: tk-devel 8.4.14 11 i586
=Sum: Header Files and C API Documentation for Tk
+Des:
<!-- DT:Rich -->
<p>This package contains header files and documentation needed for writing Tk extensions in compiled languages like C, C++, etc., or for embedding Tk in programs written in such languages.
</p><p>
This package is not needed for writing extensions or applications for Tk in the Tcl language itself.
</p>
-Des:
##----------------------------------------
=Pkg: tkimg 1.3 67 i586
=Sum: More Image Formats for Tk
+Des:
<!-- DT:Rich -->
<p>This package contains a collection of image format handlers for the Tk photo image type, and a new image type, pixmaps.
</p><p>
The provided format handlers include bmp, gif, ico, jpeg, pcx, png, ppm, ps, sgi, sun, tga, tiff, xbm, and xpm.
</p>
-Des:
##----------------------------------------
=Pkg: tktable 2.9 36 i586
=Sum: A Table/Matrix Widget Extension to Tcl/Tk
+Des:
<!-- DT:Rich -->
<p>The basic features of the widgets are:
<ul>
<li>multi-line cells
</li><li>support for embedded windows (one per cell)
</li><li>supports standard Tk reliefs, fonts, colors, etc.
</li><li>x/y scrollbar support
</li><li>'tag' styles per row, column or cell to change visual appearance
</li><li>in-cell editing - returns value back to data source
</li><li>support for disabled (read-only) tables or cells (via tags)
</li><li>multiple selection modes, with "active" cell
</li><li>multiple drawing modes to get optimal performance for larger tables
</li><li>optional 'flashes' when things update
</li><li>cell validation support
</li><li>works everywhere Tk does (including Windows and Mac!)
</li><li>unicode support (Tk8.1+)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: tla 1.3.3 36 i586
=Sum: Arch Revision Control System
+Des:
<!-- DT:Rich -->
<p>Also known as gnu-arch. It is an implementation of arch in C, by Tom Lord.
</p><p>
A modern replacement for CVS, specifically designed for the distributed
development needs of open source projects. It has uniquely good support
for development on branches (especially good merging tools), distributed
repositories (every developer can have branches in their own repository),
changeset-oriented project management (arch commits changes to multiple
files at once), and, of course, file and directory renaming.
</p><p>
You might also want to install a GUI for tla - <a href="pkg://archway">archway</a> or
web based browser - <a href="pkg://archzoom">archzoom</a>.
</p>
-Des:
##----------------------------------------
=Pkg: tls 1.5.1 27 i586
=Sum: Tcl Binding for the OpenSSL Library
+Des:
<!-- DT:Rich -->
<p>This extension provides a generic binding for Tcl to OpenSSL, utilizing the new Tcl_StackChannel API for Tcl 8.2 and higher. The sockets behave exactly the same as channels created using Tcl's built-in socket command with additional options for controlling the SSL session.
</p>
-Des:
##----------------------------------------
=Pkg: tomboy 0.4.1 38 i586
=Sum: GNOME Note Taking Application
+Des:
<!-- DT:Rich -->
<p>Tomboy is a desktop note taking application for Linux and Unix. Simple and easy to use, but with potential to help you organize the ideas and information you deal with every day.
</p>
-Des:
##----------------------------------------
=Pkg: tomoe 0.2.1 32 i586
=Sum: Japanese handwriting recognition engine
+Des:
<!-- DT:Rich -->
<p>Japanese handwriting recognition engine
(Tegaki Online MOji-ninshiki Engine)
</p>
-Des:
##----------------------------------------
=Pkg: toshutils 2.0.1 1177 i586
=Sum: Toshiba Linux Utilities
+Ins:
<!-- DT:Rich -->
<p>Please, read the documentation under
</p><p>
</p><p>
/usr/share/doc/packages/toshutils/
</p><p>
</p><p>
If you don't use these tools with care, it's possible to lock the system
completely!
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Toshiba Linux Utilities:
Toshiba Linux Utilities:<ol>
<li>fan: a tool to turn the internal fan on and off.
</li><li>hotkey: to give graphical feedback (under X) to the user while using
the "Fn" key to switch:
</li><li>Battery Save mode
</li><li>Resume/Boot mode
</li><li>svpw: a utility to change the user and the supervisor password.
</li></ol>
Find further information at
http://www.buzzard.org.uk/toshiba/
</p>
-Des:
##----------------------------------------
=Pkg: totem 2.17.0 30 i586
=Sum: Movie Player for the GNOME Desktop
+Des:
<!-- DT:Rich -->
<p>Totem is movie player for the GNOME desktop based on GStreamer (or xine).
It features a playlist, a full-screen mode, seek and volume controls,
and complete keyboard navigation.
</p><p>
Apart from a movie player, it also includes a mozilla plug-in (in a separate package) and a Nautilus thumbnailer and properties page.
</p>
-Des:
##----------------------------------------
=Pkg: totem-plugin 2.17.0 30 i586
=Sum: Browser Plugin Based on Totem Movie Player for the GNOME Desktop
+Des:
<!-- DT:Rich -->
<p>Totem is movie player for the Gnome desktop based on GStreamer (or xine).
</p><p>
Apart from a movie player, it also includes a mozilla plugin.
</p>
-Des:
##----------------------------------------
=Pkg: tpb 0.6.4 37 i586
=Sum: ThinkPad buttons - use special buttons on IBM ThinkPads
+Des:
<!-- DT:Rich -->
<p>Allows the usage of the special buttons on IBM ThinkPads
</p>
-Des:
##----------------------------------------
=Pkg: tpctl 4.17 62 i586
=Sum: ThinkPad configuration tools
+Ins:
<!-- DT:Rich -->
<p>These programs cannot be used on machines other than IBM Thinkpad.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>With this tool you can change the BIOS settings on IBM Thinkpads.
tpctl -- command line ThinkPad control program
ntpctl -- ncurses ThinkPad control program
</p>
-Des:
##----------------------------------------
=Pkg: tpctl-kmp-bigsmp 4.17_2.6.18.2_34 62 i586
=Sum: ThinkPad configuration kernel modules
+Ins:
<!-- DT:Rich -->
<p>These programs cannot be used on machines other than IBM Thinkpad.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>With this tool you can change the BIOS settings on IBM Thinkpads.
tpctl -- command line ThinkPad control program
ntpctl -- ncurses ThinkPad control program
</p>
-Des:
##----------------------------------------
=Pkg: tpctl-kmp-default 4.17_2.6.18.2_34 62 i586
=Sum: ThinkPad configuration kernel modules
+Ins:
<!-- DT:Rich -->
<p>These programs cannot be used on machines other than IBM Thinkpad.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>With this tool you can change the BIOS settings on IBM Thinkpads.
tpctl -- command line ThinkPad control program
ntpctl -- ncurses ThinkPad control program
</p>
-Des:
##----------------------------------------
=Pkg: trackballs 1.1.1 42 i586
=Sum: Trackballs - A Marble Madness-like Game
+Des:
<!-- DT:Rich -->
<p>Trackballs is a simple game similar to the
classic game Marble Madness on the Amiga
in the 80's. The player collects points by steering a marble ball through
a labyrinth filled with vicious hammers, pools
of acid, and other obstacles.
</p><p>
When the ball reaches the destination you continue
on to the next, more difficult level - unless, of
course, the time runs out.
</p><p>
You steer the ball using the mouse and by pressing
space, you can jump a short distance.
</p><p>
When all levels are finished, an editor mode permits you
to create new ones ("trackballs -e").
</p>
-Des:
##----------------------------------------
=Pkg: traffic-vis 0.35 176 i586
=Sum: Network Traffic Analysis Suite
+Des:
<!-- DT:Rich -->
<p>traffic-vis is a suite of tools to help determine which hosts have been
communicating on an IP network, with whom they have been communicating, and
the volume of communication that has taken place. Output is in plain text,
HTML, or PostScript format.
</p>
-Des:
##----------------------------------------
=Pkg: transfig 3.2.4 103 i586
=Sum: Graphic Converter
+Des:
<!-- DT:Rich -->
<p>TransFig is a set of tools for creating TeX documents with graphics
that are portable in the sense that they can be printed in a wide
variety of environments.
</p><p>
The transfig directory contains the source for the transfig command
which generates a Makefile which translates Fig code to various graphics
description languages using the fig2dev program. In previous releases,
this command was implemented as a shell script.
</p><p>
Documentation: man transfig
</p>
-Des:
##----------------------------------------
=Pkg: transset 20040120 40 i586
=Sum: simple program to make windows transparent
+Des:
<!-- DT:Rich -->
<p>transset manipulates the _NET_WM_WINDOW_OPACITY property to make
windows transparent.
</p>
-Des:
##----------------------------------------
=Pkg: tree 1.5.0 31 i586
=Sum: file listing as a tree
+Des:
<!-- DT:Rich -->
<p>A tree-like directory listing program with dircolors support
</p>
-Des:
##----------------------------------------
=Pkg: tse3 0.3.1 34 i586
=Sum: TSE3 MIDI Sequencer Library
+Des:
<!-- DT:Rich -->
<p>TSE3 is a MIDI sequencer library written in C++. Sequencer
applications or multimedia presentation packages can
incorporate the TSE3 libraries to provide a user with MIDI
sequencing facilities. The library is open source.
</p>
-Des:
##----------------------------------------
=Pkg: tv-common 3.95 25 i586
=Sum: Fonts, Tools, and some READMEs for motv and xawtv
+Des:
<!-- DT:Rich -->
<p>This package includes some X Window System fonts used by motv and xawtv, some
utilities for them (xawtv-remote, for example), and some README files.
</p>
-Des:
##----------------------------------------
=Pkg: twinkle 0.9 21 i586
=Sum: A SIP Soft Phone
+Des:
<!-- DT:Rich -->
<p>Twinkle is a SIP-based soft phone for making telephone calls over IP networks.
</p>
-Des:
##----------------------------------------
=Pkg: udev 103 12 i586
=Sum: A Rule-Based Device Node and Kernel Event Manager
+Des:
<!-- DT:Rich -->
<p>udev's main task is to create and remove device nodes in /dev when a device is discovered or removed from the system. udevd receives all hotplug events via kernel netlink messages and dispatches them according to rules in /etc/udev/rules.d/. Matching rules may name a device node, create additional symlinks to the node, call tools to initialize a device, or load needed kernel modules.
See the documentation in /usr/share/doc/packages/udev.
</p>
-Des:
##----------------------------------------
=Pkg: ufraw 0.9.120061023 21 i586
=Sum: The Unidentified Flying Raw
+Des:
<!-- DT:Rich -->
<p>Command-line tools to read and manipulate raw images from digital cameras. Takes care of the color management, handles the Nikon curve formats and has editor for the tone curves. It allows easy process more images in a batch.
</p>
-Des:
##----------------------------------------
=Pkg: ufraw-gimp 0.9.120061023 21 i586
=Sum: Raw photo loader plugin for The GIMP
+Des:
<!-- DT:Rich -->
<p>UFRaw is a utility to read and manipulate raw images from digital cameras. It can be used as a GIMP plug-in. It reads raw images using Dave Coffin's raw conversion utility DCRaw. And it supports basic color management using Little CMS, allowing
the user to apply color profiles.
</p>
-Des:
##----------------------------------------
=Pkg: uim 1.2.1 31 i586
=Sum: a multilingual input method library
+Des:
<!-- DT:Rich -->
<p>Uim is a multilingual input method library. Uim's project goal is to
provide secure and useful input method for all languages. Currently,
it can input to applications which support gtk+'s immodule or XIM.
</p>
-Des:
##----------------------------------------
=Pkg: uim-devel 1.2.1 31 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>Include Files and Libraries mandatory for Development.
</p>
-Des:
##----------------------------------------
=Pkg: uim-qt 1.2.1 31 i586
=Sum: Qt input module plugin for uim
+Des:
<!-- DT:Rich -->
<p>Qt input module plugin for uim
</p>
-Des:
##----------------------------------------
=Pkg: umtsmon 0.3 26 i586
=Sum: control/monitor your UMTS card
+Des:
<!-- DT:Rich -->
<p>A program to control your UMTS card: enter SIM PIN code, send and receive SMS and control/monitor the network connection.
</p>
-Des:
##----------------------------------------
=Pkg: unace 2.5 165 i586
=Sum: ACE archive extractor
+Des:
<!-- DT:Rich -->
<p>ACE archive extractor.
Distributed under the Public UnAce Licence.
</p>
-Des:
##----------------------------------------
=Pkg: unarj 2.65 173 i586
=Sum: Pack Program
+Des:
<!-- DT:Rich -->
<p>Unarj allows for unpacking of .arj files, which are widely spread in the DOS world.
It is included for compatibility reasons, to be able to extract packages from DOS.
It should not be used for compressing packages under Linux. Use gzip, which
is the standard, instead.
</p>
-Des:
##----------------------------------------
=Pkg: unclutter 8 874 i586
=Sum: Remove the idle cursor image from the screen
+Des:
<!-- DT:Rich -->
<p>Unclutterer removes the cursor image from the screen so that
it does not obstruct the area you are looking at after it
has not moved for a given period of time.
</p>
-Des:
##----------------------------------------
=Pkg: ungifsicle 1.39 182 i586
=Sum: creating and editing, GIF images and animations
+Des:
<!-- DT:Rich -->
<p>Gifsicle twaddles GIF image files in a variety of ways. It is better
than many of the freely available GIF twaddlers on the market -- for one
thing, it has more options.
</p><p>
It supports merging several GIFs into a GIF animation; exploding an
animation into its component frames; changing individual frames in an
animation; turning interlacing on and off; adding transparency; adding
delays, disposals, and looping to animations; adding or removing comments;
flipping and rotation; optimizing animations for space; and changing
images' colormaps, among other things. Extensive command-line options
control which, if any, of these occur.
</p><p>
Gifview, a companion program requiring X11, displays GIF images and
animations on an X display. It can display multi-frame GIFs either as
slideshows, displaying one frame at a time, or as real-time animations.
</p><p>
Gifdiff, another companion program, checks two GIF files for identical
visual appearance. This is probably most useful for testing
GIF-manipulating software.
</p>
-Des:
##----------------------------------------
=Pkg: unison 2.17.1 20 i586
=Sum: A file synchronization tool
+Des:
<!-- DT:Rich -->
<p>Unison is a file synchronization tool for Unix and Windows. It allows two
replicas of a collection of files and directories to be stored on different
hosts (or different disks on the same host), modified separately, then
brought up to date by propagating the changes in each replica to the other.
</p>
-Des:
##----------------------------------------
=Pkg: units 1.85 32 i586
=Sum: Units Conversion Utility
+Des:
<!-- DT:Rich -->
<p>The 'units' program converts quantities expressed in various scales to their
equivalents in other scales.
</p><p>
Units can also convert temperature values (Fahrenheit to Celsius, for example) but this
needs a slightly different input syntax. See the man page for details.
</p>
-Des:
##----------------------------------------
=Pkg: unix2dos 2.2 258 i586
=Sum: UNIX to DOS text file format converter
+Des:
<!-- DT:Rich -->
<p>Converts plain text files from UNIX format to DOS format.
</p>
-Des:
##----------------------------------------
=Pkg: unixODBC 2.2.12 13 i586
=Sum: ODBC driver manager with some drivers included
+Des:
<!-- DT:Rich -->
<p>UnixODBC aims to provide a complete ODBC solution for the Linux
platform. Further drivers can be found at http://www.unixodbc.org/.
</p>
-Des:
##----------------------------------------
=Pkg: unrar 3.60.8 19 i586
=Sum: A program to extract, test, and view RAR archives
+Des:
<!-- DT:Rich -->
<p>The unRAR utility is a freeware program distributed with source code and
developed for extracting, testing, and viewing the contents of archives
created with the RAR archiver.
</p>
-Des:
##----------------------------------------
=Pkg: unsermake 0.4_20060307 32 i586
=Sum: Replacement for make and automake
+Des:
<!-- DT:Rich -->
<p>Developed for building KDE, Unsermake replaces the functionality of automake and make.
</p>
-Des:
##----------------------------------------
=Pkg: unzip 5.52 34 i586
=Sum: A program to unpack compressed files
+Des:
<!-- DT:Rich -->
<p>UnZip is an extraction utility for archives compressed in .zip format
(known as "zip files"). Although highly compatible both with PKWARE's
PKZIP(tm) and PKUNZIP utilities for MS-DOS and with Info-ZIP's own Zip
program, our primary objectives have been portability and non-MS-DOS
functionality. This version can also extract encrypted archives.
</p>
-Des:
##----------------------------------------
=Pkg: upx 2.02 14 i586
=Sum: The Ultimate Packer for eXecutables
+Des:
<!-- DT:Rich -->
<p>UPX is a free, portable, extendable, high-performance executable packer
for several different executable formats. It achieves an excellent
compression ratio and offers very fast decompression. Your executables
suffer no memory overhead or other drawbacks.
</p>
-Des:
##----------------------------------------
=Pkg: usbutils 0.72 20 i586
=Sum: Tools and libraries for USB devices
+Des:
<!-- DT:Rich -->
<p>This package contains a utility for inspecting
devices connected to USB ports.
</p><p>
It requires kernel version 2.3.99-pre7 or newer, or the USB backport which
was introduced in 2.2.18 (supporting the /proc/bus/usb interface).
</p>
-Des:
##----------------------------------------
=Pkg: usbview 1.0 880 i586
=Sum: USB Topology and Device Viewer
+Des:
<!-- DT:Rich -->
<p>USBView is a GTK program that displays the topography of the devices
that are plugged into the USB on a Linux machine. It also displays
information on each of the devices. This can be useful to determine if
a device is working properly.
</p>
-Des:
##----------------------------------------
=Pkg: utempter 0.5.5 35 i586
=Sum: A privileged helper for utmp and wtmp updates
+Des:
<!-- DT:Rich -->
<p>Utempter is a utility that allows non-privileged applications
such as terminal emulators to modify the utmp database without
having to be setuid root.
</p>
-Des:
##----------------------------------------
=Pkg: util-linux 2.12r 61 i586
=Sum: A collection of basic system utilities
+Des:
<!-- DT:Rich -->
<p>This package contains a large variety of low-level system utilities that
are necessary for a Linux system to function. It contains the mount
program, the fdisk configuration tool, and more.
</p>
-Des:
##----------------------------------------
=Pkg: util-linux-crypto 2.12a 36 i586
=Sum: A Collection of Basic File System Encryption Utilities
+Des:
<!-- DT:Rich -->
<p>This package contains a variety of low-level system utilities for working with cryptographic file systems
</p>
-Des:
##----------------------------------------
=Pkg: v4l-conf 3.95 25 i586
=Sum: Video4linux Configuration Tool
+Des:
<!-- DT:Rich -->
<p>This is a small utility used to configure video4linux device drivers
(bttv, for example). xawtv, motv, and fbtv need it.
</p>
-Des:
##----------------------------------------
=Pkg: v4l-tools 3.95 25 i586
=Sum: video4linux terminal / command line utilities
+Des:
<!-- DT:Rich -->
<p>This package includes a bunch of command line utilities: v4lctl to
control video4linux devices; streamer to record movies; fbtv to
watch TV on the framebuffer console; ttv to watch tv on any ttv (powered
by aalib), webcam for capturing and uploading images, a curses radio
application, ...
</p>
-Des:
##----------------------------------------
=Pkg: vacation 1.2.6.2 19 i586
=Sum: A way to automatically reply to incoming e-mail
+Des:
<!-- DT:Rich -->
<p>This program answers your e-mail when you are lying on the beach.
</p><p>
Documentation: man vacation
</p>
-Des:
##----------------------------------------
=Pkg: valgrind 3.2.1 21 i586
=Sum: Memory Management Debugger
+Des:
<!-- DT:Rich -->
<p>Valgrind checks all memory operations in an application, like read, write, malloc, new, free, and delete. Valgrind can find uses of uninitialized memory, access to already freed memory, overflows, illegal stack operations, memory leaks, and any illegal new/malloc/free/delete commands.
Another program in the package is "cachegrind," a profiler based on the
valgrind engine.
</p><p>
To use valgrind you should compile your application with "-g -O0" compiler options. Afterwards you can use it with:
</p><p>
valgrind --tool=memcheck
--sloppy-malloc=yes
--leak-check=yes
--db-attach=yes my_application, for example.
</p><p>
More valgrind options can be listed via "valgrind --help". There is also complete documentation in the /usr/share/doc/packages/valgrind/ directory.
A debugged application runs slower and needs much more memory, but is usually still usable. Valgrind is still in development, but it has been successfully used to optimize several KDE applications.
<p>This tool allows you to monitor the status of the Mylex DAC960 RAID
controller series.
It also allows certain administrative tasks, such as starting rebuilds.
</p>
-Des:
##----------------------------------------
=Pkg: vbetool 0.7 22 i586
=Sum: A tool to save and restore the VBE state of graphics cards.
+Des:
<!-- DT:Rich -->
<p>A tool to save and restore the VBE state of graphics cards. This can be useful to get your graphics card working again after a suspend to RAM.
</p>
-Des:
##----------------------------------------
=Pkg: vcdimager 0.7.23 39 i586
=Sum: Video CD (VCD) authoring software
+Des:
<!-- DT:Rich -->
<p>GNU VCDImager is a full-featured mastering suite for authoring, disassembling
and analyzing Video CDs and Super Video CDs.
</p><p>
The following features are available so far:
</p><p>
Support for Video CD 1.1 and 2.0 disc formats
</p><p>
Support for the Super Video CD 1.0 disc format
</p><p>
Full PBC (playback control) support (play lists, selection lists and end
lists)
</p><p>
Support for segment play items
</p><p>
Automatic padding of MPEG streams on the fly
</p><p>
Support for 99-minute (out-of-specification) CD-R media
</p><p>
Extraction of Video CDs into files (incl. the PBC information)
</p><p>
Use of XML for the description of Video CDs
</p>
-Des:
##----------------------------------------
=Pkg: vcdimager-devel 0.7.23 39 i586
=Sum: Video CD (VCD) authoring software
+Des:
<!-- DT:Rich -->
<p>GNU VCDImager is a full-featured mastering suite for authoring, disassembling
and analyzing Video CDs and Super Video CDs.
</p><p>
The following features are available so far:
</p><p>
Support for Video CD 1.1 and 2.0 disc formats
</p><p>
Support for the Super Video CD 1.0 disc format
</p><p>
Full PBC (playback control) support (play lists, selection lists and end
lists)
</p><p>
Support for segment play items
</p><p>
Automatic padding of MPEG streams on the fly
</p><p>
Support for 99-minute (out-of-specification) CD-R media
</p><p>
Extraction of Video CDs into files (incl. the PBC information)
</p><p>
Use of XML for the description of Video CDs
</p>
-Des:
##----------------------------------------
=Pkg: vdr 1.4.4 4 i586
=Sum: Video Disk Recorder
+Des:
<!-- DT:Rich -->
<p>This is a hard disk video recording software supporting the Siemens DVB-S card
and compatible devices.
</p>
-Des:
##----------------------------------------
=Pkg: vigra 1.4.0 33 i586
=Sum: VIGRA Library
+Des:
<!-- DT:Rich -->
<p>VIGRA stands for "Vision with Generic Algorithms". It is a novel computer vision library that puts its main emphasis on customizable algorithms and data structures. By using template techniques similar to those in the C++ Standard Template Library, you can easily adapt any VIGRA component to the needs of your application, without giving up execution speed.
</p>
-Des:
##----------------------------------------
=Pkg: viki 0.0 57 i586
=Sum: Visual Keyboard
+Des:
<!-- DT:Rich -->
<p>viki is an accessibility tool for entering text using the mouse cursor into other applications.
</p>
-Des:
##----------------------------------------
=Pkg: vim 7.0 34 i586
=Sum: Vi IMproved
+Des:
<!-- DT:Rich -->
<p>Vim (Vi IMproved) is an almost compatible version of the UNIX editor vi.
Almost every possible command can be performed using only ASCII
characters. Only the 'Q' command is missing (you do not need it).
Many new features have
been added: multilevel undo, command line history, file name
completion, block operations, and editing of binary data.
</p><p>
Vi is available for the AMIGA, MS-DOS, Windows NT, and various versions
of UNIX.
</p><p>
For SuSE Linux, Vim is used as /usr/bin/vi.
</p><p>
Package vim contains the smallest set of features, which should even run in a minimal system. If you need more features, you might want to install packages vim-enhanced or gvim.
</p>
-Des:
##----------------------------------------
=Pkg: vkeybd 0.1.17a 34 i586
=Sum: Vkeybd - Virtual Keyboard Instrument
+Des:
<!-- DT:Rich -->
<p>Vkeybd is a virtual keyboard (as in musical instrument)
for AWE32/64, raw MIDI, and ALSA sequencer drivers. It is written in
Tcl/Tk. Enjoy playing music with your "computer" keyboard.
</p>
-Des:
##----------------------------------------
=Pkg: vlna 1.2 206 i586
=Sum: Add non-breakable spaces to Czech text files
+Ins:
<!-- DT:Rich -->
<p>Please read the file /usr/share/doc/packages/x_cz_sk/README.1st (after installation).
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Vlna adds non-breakable spaces instead of normal ones after single-letter
words in Czech text (prefarably TeX) files.
</p>
-Des:
##----------------------------------------
=Pkg: vlock 1.3 563 i586
=Sum: It allows you to lock your console display.
+Des:
<!-- DT:Rich -->
<p>This is vlock, the Linux _V_irtual Console locking program. It
allows you to lock one or all of the sessions of your Linux console
display.
</p>
-Des:
##----------------------------------------
=Pkg: vorbis-tools 1.1.1 37 i586
=Sum: Ogg Vorbis Tools
+Des:
<!-- DT:Rich -->
<p>This package contains some tools for Ogg Vorbis:
oggenc (an encoder) and ogg123 (a playback tool).
</p>
-Des:
##----------------------------------------
=Pkg: vpnc 0.3.3 34 i586
=Sum: Client for cisco3000 VPN Concentrator
+Des:
<!-- DT:Rich -->
<p>A VPN client compatible with Cisco's EasyVPN equipment.
</p><p>
Supports IPSec (ESP) with Mode Configuration and Xauth. Supports only shared-secret IPSec authentication, 3DES, MD5, and IP tunneling.
</p><p>
It runs entirely in userspace and uses the TUN/TAP driver for access.
</p>
-Des:
##----------------------------------------
=Pkg: vsftpd 2.0.5 24 i586
=Sum: Very Secure FTP Daemon - Written from Scratch
+Des:
<!-- DT:Rich -->
<p>Vsftpd is an FTP server, or dæmon. The "vs" stands for Very Secure. Obviously
this is not a guarantee, but the entire codebase was written with security in
mind, and carefully designed to be resilient to attack.
</p><p>
Recent evidence suggests that vsftpd is also extremely fast (and this is before
any explicit performance tuning!). In tests against wu-ftpd, vsftpd was always
faster, supporting over twice as many users in some tests.
</p>
-Des:
##----------------------------------------
=Pkg: vte 0.14.1 18 i586
=Sum: Terminal Emulator
+Des:
<!-- DT:Rich -->
<p>VTE is a terminal emulator library that provides a terminal widget for
use with GTK+ 2.0 as well as handling of child process and terminal
emulation settings.
</p>
-Des:
##----------------------------------------
=Pkg: vte-devel 0.14.1 18 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>VTE is an experimental terminal emulator widget for use with GTK+ 2.0. This
package contains the files needed for building applications using VTE.
</p>
-Des:
##----------------------------------------
=Pkg: vte-sharp 1.0.10 60 i586
=Sum: Mono bindings for vte
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for vte.
</p>
-Des:
##----------------------------------------
=Pkg: vte-sharp2 2.8.3 33 i586
=Sum: Mono bindings for vte
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for vte.
</p>
-Des:
##----------------------------------------
=Pkg: vym 1.8.1 26 i586
=Sum: VYM (View Your Mind) is a tool to generate and manipulate maps which show your thoughts.
+Des:
<!-- DT:Rich -->
<p>VYM (View Your Mind) is a tool to generate and manipulate maps which show your thoughts. Such maps can help you to improve your creativity and effectivity. You can use them for time management, to organize tasks, to get an overview over complex contexts, to sort your ideas etc. Some people even think it is fun to work with such maps...
</p>
-Des:
##----------------------------------------
=Pkg: w3m 0.5.1 41 i586
=Sum: A text-based WWW browser
+Des:
<!-- DT:Rich -->
<p>W3m is a pager and text-based WWW browser. It has a number of useful features:
<ul>
<li>w3m can render tables
</li><li>w3m can render frames (it converts the frames into a table)
</li><li>SSL support
</li><li>w3m can easily display documents from standard input
</li><li>w3m can handle cookies
</li><li>w3m is small
</li><li>w3m has mouse support
</li></ul>
If w3m-inline-image is installed it can display graphics inside terminals, even
on the console on some platforms.
</p>
-Des:
##----------------------------------------
=Pkg: w3mir 1.0.10 551 i586
=Sum: HTTP Copying and Mirroring Tool
+Des:
<!-- DT:Rich -->
<p>w3mir's main focus is to create and maintain a browsable copy of
one or several remote World Wide Web sites.
</p><p>
Used to its full potential, w3mir can retrieve the contents of
several related sites and leave the mirror browseable via a local web
server or from a file system, such as directly from a CD-ROM.
</p><p>
w3mir's goal is to be able to make useful mirrors of any reasonable
World Wide Web site. It specifically preserves link integrity within the mirrored
documents as well as the integrity of links outside the mirror, if you
want it to. w3mir has a powerful "multi scope" mechanism enabling the
user to make mirrors of several related sites and have links between
them refer to the mirrored documents rather than the original site.
w3mir has several features directed at getting mirrors for CD-ROM burning
and the handling of some rare problems when mirroring.
</p>
-Des:
##----------------------------------------
=Pkg: wbxml2 0.9.0 39 i586
=Sum: WBXML parser and compiler library.
+Des:
<!-- DT:Rich -->
<p>wbxml2 is a library that includes a WBXML parser and a WBXML compiler.
Unlike wbxml, it does not depend on libxml2 but on expat, making it faster and more portable.
WBXML Library contains a library and its associated tools to Parse, Encode and Handle WBXML documents. The WBXML (Wireless Binary XML) format is a binary representation of XML, and it has been defined by the Wap Forum.
</p>
-Des:
##----------------------------------------
=Pkg: wdfs 1.2.1 23 i586
=Sum: WebDAV file system
+Des:
<!-- DT:Rich -->
<p>wdfs is a WebDAV filesystem with special features for accessing subversion repositories. It is based on fuse and neon.
</p>
-Des:
##----------------------------------------
=Pkg: wdiff 0.5.2 692 i586
=Sum: Display Word Differences Between Text Files
+Des:
<!-- DT:Rich -->
<p>wdiff compares two files and finds which words have been
deleted or added to old_file to get new_file. A word is
considered to be anything between whitespace.
</p><p>
</p><p>
Xwdiff is a handy X Window System front-end, based on Tcl/Tk.
</p>
-Des:
##----------------------------------------
=Pkg: websh 3.5.0 140 i586
=Sum: Tcl Extension for Building Web Applications
+Des:
<!-- DT:Rich -->
<p>Websh is a rapid development environment for building powerful, fast, and reliable web applications. Websh is versatile and handles everything from HTML generation to database driven one-to-one page customization. It has been used for years for projects such as E-commerce shops or electronic banking applications. Websh is extensible and portable, and its comprehensive set of commands is quickly learned.
</p>
-Des:
##----------------------------------------
=Pkg: wesnoth 1.1.12 5 i586
=Sum: Fantasy Turn-Based Strategy Game
+Des:
<!-- DT:Rich -->
<p>Battle for Wesnoth is a fantasy turn-based strategy game. Battle for control of villages, using variety of units which have advantages and disadvantages in different types of terrains and against different types of attacks. Units gain experience and advance levels, and are carried over from one scenario to the next campaign.
</p>
-Des:
##----------------------------------------
=Pkg: wesnoth-campaign-server 1.1.12 5 i586
=Sum: Battle for Wesnoth: campaign server
+Des:
<!-- DT:Rich -->
<p>The campaign server acts as a simple download server, much like ftp, to provide a collection of Wesnoth campaigns to players.
</p>
-Des:
##----------------------------------------
=Pkg: wesnoth-editor 1.1.12 5 i586
=Sum: Level editor for Battle for Wesnoth
+Des:
<!-- DT:Rich -->
<p>This package contains a level editor for Battle for Wesnoth. It can be used to create new campaigns or multiplayer maps.
</p>
-Des:
##----------------------------------------
=Pkg: wesnoth-server 1.1.12 5 i586
=Sum: Multiplayer server for Battle for Wesnoth
+Des:
<!-- DT:Rich -->
<p>This package contains the server program hosting multiplayer games of Battle for Wesnoth.
</p>
-Des:
##----------------------------------------
=Pkg: wesnoth-tools 1.1.12 5 i586
=Sum: Battle for Wesnoth: tools for translators and artists
+Des:
<!-- DT:Rich -->
<p>This package includes tools for translators and artists working on Battle for Wesnoth.
</p>
-Des:
##----------------------------------------
=Pkg: wget 1.10.2 35 i586
=Sum: A Tool for Mirroring FTP and HTTP Servers
+Des:
<!-- DT:Rich -->
<p>Wget enables you to retrieve WWW documents or FTP files from a server.
This can be done in script files or via the command line.
</p>
-Des:
##----------------------------------------
=Pkg: whois 4.7.17 16 i586
=Sum: whois Client Program
+Des:
<!-- DT:Rich -->
<p>This is a new whois (RFC 954) client rewritten from scratch by Marco d'Itri.
It is derived from and compatible with the usual BSD and RIPE whois(1)
programs. It is intelligent and can automatically select the appropriate whois
server for most queries.
This package also contains mkpasswd, a simple front-end to crypt(3).
</p>
-Des:
##----------------------------------------
=Pkg: wiggle 0.6 144 i586
=Sum: A Tool for Applying Patches with Conflicts
+Des:
<!-- DT:Rich -->
<p>Wiggle is a program for applying patches that 'patch' cannot
apply due to conflicting changes in the original.
</p><p>
Wiggle will always apply all changes in the patch to the original.
If it cannot find a way to cleanly apply a patch, it inserts it
in the original in a manner similar to 'merge,' and reports an
unresolvable conflict.
</p>
-Des:
##----------------------------------------
=Pkg: wine 0.9.24 15 i586
=Sum: An MS Windows Emulator
+Des:
<!-- DT:Rich -->
<p>An MS Windows emulator, consisting of both runtime and also source
compatibility functions. You can run your MS executables with it
and you can write your Windows programs under Linux and link against
the WINE libraries.
</p><p>
It is not necessary to have a Windows installation to run WINE.
</p><p>
Refer to /usr/share/doc/packages/wine/README.SuSE.
There is more documentation available in that directory.
Read 'man wine' for further information.
</p><p>
You can invoke wine by entering 'wine program.exe'.
Configure it by running 'winecfg'.
</p>
-Des:
##----------------------------------------
=Pkg: wink 1.5 15 i586
=Sum: Tool for creation of software tutorials
+Des:
<!-- DT:Rich -->
<p>Wink is a Tutorial and Presentation creation software, primarily aimed at creating tutorials on how to use software (like a tutor for MS-Word/Excel etc). Using Wink you can capture screenshots, add explanations boxes, buttons, titles etc and generate a highly effective tutorial for your users.
</p>
-Des:
##----------------------------------------
=Pkg: wireless-tools 29pre10 22 i586
=Sum: Tools for a wireless LAN
+Des:
<!-- DT:Rich -->
<p>This package contain the wireless tools, used to manipulate
the wireless extensions. The wireless extension is an interface that
allows you to set wireless LAN specific parameters and get
specific stats.
</p>
-Des:
##----------------------------------------
=Pkg: wireshark 0.99.4 5 i586
=Sum: A Network Traffic Analyser
+Des:
<!-- DT:Rich -->
<p>Wireshark is a free network protocol analyzer for Unix and Windows. It allows you to examine data from a live network or from a capture file on disk. You can interactively browse the capture data, viewing summary and detail information for each packet. Ethereal has several powerful features, including a rich display filter language and the ability to view the reconstructed stream of a TCP session.
</p>
-Des:
##----------------------------------------
=Pkg: wlan-kmp-bigsmp 1_2.6.18.2_34 16 i586
=Sum: Kernel Modules for Wireless LAN Cards
+Des:
<!-- DT:Rich -->
<p>This package contains kernel modules for various WLAN adapters.
</p>
-Des:
##----------------------------------------
=Pkg: wlan-kmp-default 1_2.6.18.2_34 16 i586
=Sum: Kernel Modules for Wireless LAN Cards
+Des:
<!-- DT:Rich -->
<p>This package contains kernel modules for various WLAN adapters.
</p>
-Des:
##----------------------------------------
=Pkg: wlan-kmp-xen 1_2.6.18.2_34 16 i586
=Sum: Kernel Modules for Wireless LAN Cards
+Des:
<!-- DT:Rich -->
<p>This package contains kernel modules for various WLAN adapters.
</p>
-Des:
##----------------------------------------
=Pkg: wlan-kmp-xenpae 1_2.6.18.2_34 16 i586
=Sum: Kernel Modules for Wireless LAN Cards
+Des:
<!-- DT:Rich -->
<p>This package contains kernel modules for various WLAN adapters.
</p>
-Des:
##----------------------------------------
=Pkg: wodim 1.0pre5cvs 6 i586
=Sum: Tool for Writing CDRs
+Des:
<!-- DT:Rich -->
<p>wodim is used to record data or audio Compact Discs on a
CD-Recorder or to write DVD media on a DVD-Recorder.
</p>
-Des:
##----------------------------------------
=Pkg: wordcut 0.5.1b2 38 i586
=Sum: Thai word segmentation utility.
+Des:
<!-- DT:Rich -->
<p>Thai word segmentation utility.
</p>
-Des:
##----------------------------------------
=Pkg: wordcut-devel 0.5.1b2 38 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: wpa_supplicant 0.4.9 27 i586
=Sum: WPA supplicant implementation
+Des:
<!-- DT:Rich -->
<p>wpa_supplicant is an implementation of the WPA Supplicant component,
i.e., the part that runs in the client stations. It implements key
negotiation with a WPA Authenticator and it controls the roaming and
IEEE 802.11 authentication/association of the wlan driver.
</p>
-Des:
##----------------------------------------
=Pkg: wpa_supplicant-gui 0.4.9 27 i586
=Sum: WPA supplicant graphical front-end
+Des:
<!-- DT:Rich -->
<p>This package contains a graphical front-end to wpa_supplicant, an implementation of the WPA Supplicant component.
</p>
-Des:
##----------------------------------------
=Pkg: wsndpref 1.1.1 992 i586
=Sum: A Setup Program for the WSoundServer
+Des:
<!-- DT:Rich -->
<p>A setup program for the WSoundServer.
</p>
-Des:
##----------------------------------------
=Pkg: wsndsrv 0.4.0 1025 i586
=Sum: Soundserver for Window Maker
+Des:
<!-- DT:Rich -->
<p>A Soundserver for Window Maker.
</p>
-Des:
##----------------------------------------
=Pkg: wv 1.0.3 44 i586
=Sum: Word 8 Converter for Unix
+Des:
<!-- DT:Rich -->
<p>WV is a program that can understand the Microsoft Word 8
binary file format (Office97). It currently converts Word into HTML,
which can then be read with a web browser.
</p>
-Des:
##----------------------------------------
=Pkg: wv2 0.2.3 29 i586
=Sum: library to import Microsoft Word documents
+Des:
<!-- DT:Rich -->
<p>The wv2 library is used to import Microsoft Word documents in koffice for example.
</p>
-Des:
##----------------------------------------
=Pkg: wvdial 1.54 103 i586
=Sum: A PPP dialer
+Des:
<!-- DT:Rich -->
<p>A PPP dialer. With this program you can manually establish a PPP
connection to your ISP. Manual configuration, like dealing with
chat scripts, is normally not necessary as this program contains
enough intelligence to deal with most ISPs.
</p>
-Des:
##----------------------------------------
=Pkg: wvstreams 4.2.2 11 i586
=Sum: Network Programming Library in C++
+Des:
<!-- DT:Rich -->
<p>A network programming library in C++. It aims to be an efficient,
secure, easy to use, and OS-independent library for network
application development.
</p>
-Des:
##----------------------------------------
=Pkg: wwwoffle 2.9a 22 i586
=Sum: World Wide Web Offline Proxy
+Des:
<!-- DT:Rich -->
<p>A proxy HTTP server for computers with dial-up internet access.
</p><p>
<ul>
<li>Caching of pages viewed while connected for review later.
</li><li>Browsing of cached pages while not connected, with the ability
to follow links and mark other pages for download.
</li><li>Non-interactive downloading of specified pages.
</li><li>Multiple indices of pages stored in cache for easy selection.
</li><li>Interactive or command line option to select pages for fetching
individually or recursively.
</li><li>All options controlled using a simple configuration file with a
web page to edit it.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: wxGTK 2.6.3.3 30 i586
=Sum: C++ Framework for Cross-Platform Development
+Des:
<!-- DT:Rich -->
<p>wxWidgets is a free C++ framework to make cross-platform programming easy.
It supports Windows 3.1/95/98/NT, and Unix with
GTK/Motif/Lesstif. This is the version for GTK+. This package only
contains the runtime libraries and other data needed by the runtime
libraries.
</p><p>
Additional documentation is available in the package wxGTK-doc
and you can find some examples in the package wxGTK-examples.
</p>
-Des:
##----------------------------------------
=Pkg: wxGTK-compat 2.6.3.3 30 i586
=Sum: wxWidgets Compatibility Package
+Des:
<!-- DT:Rich -->
<p>wxWidgets is a free C++ framework to make cross-platform programming easy.
It supports Windows 3.1/95/98/NT, and UNIX with
GTK/Motif/Lesstif. This is the version for GTK+. This package only
contains the runtime libraries and other data needed by the runtime
libraries.
</p><p>
This package contains a library compiled without Unicode support, which is needed for some improperly written applications.
</p>
-Des:
##----------------------------------------
=Pkg: x11-input-synaptics 0.14.6 24 i586
=Sum: X11 input module for synaptics touchpad
+Des:
<!-- DT:Rich -->
<p>X11 input module for synaptics touchpad
</p>
-Des:
##----------------------------------------
=Pkg: x11-input-wacom 0.7.6 18 i586
=Sum: X11 input module for wacom tablet
+Des:
<!-- DT:Rich -->
<p>This package contains the X11 input module for wacom tablets.
</p>
-Des:
##----------------------------------------
=Pkg: x11-input-wacom-tools 0.7.6 18 i586
=Sum: Tools for configuration, diagnostic and libraries for Wacom tablets
+Des:
<!-- DT:Rich -->
<p>This package contains tools for configuration, diagnostic and libraries for
Wacom tablets.
</p>
-Des:
##----------------------------------------
=Pkg: x11-tools 0.1 57 i586
=Sum: Tools for the X Window System
+Des:
<!-- DT:Rich -->
<p>Some useful tools for the X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: x2x 1.30_beta 42 i586
=Sum: X Window System Display Remote Control
+Des:
<!-- DT:Rich -->
<p>x2x allows the keyboard and mouse on one ("from") X Window System display to be used
to control another ("to") X Window System display.
</p>
-Des:
##----------------------------------------
=Pkg: x3270 3.2.20 328 i586
=Sum: A Family of IBM 3270 Terminal Emulators
+Des:
<!-- DT:Rich -->
<p>This package contains a family of IBM 3270 mainframe terminal emulators:
<ul>
<li>terminal emulators for interactive use
x3270 X Window System
c3270 curses based
</li><li>terminal emulators for scripted use
s3270 see the x3270-script man page
tcl3270 Tcl based
</li><li>printer emulator pr3287
</li><li>do not miss the punch card puncher emulator x026
</li></ul>
x3270 is an IBM 3270 terminal emulator for the X Window System. x3270
runs over a telnet connection (with or without TN3270E) and emulates
either an IBM 3279 (color) or 3278 (monochrome). It supports APL2
characters, IND$FILE file transfer, NVT mode, a pop-up keypad for
3270-specific keys, alternative keymaps, 3287 printer sessions, and a
scrollbar and has extensive debugging and scripting facilities.
</p><p>
c3270 is the curses-based version of x3270. It runs on any dumb
terminal (an xterm or a console, for example), and supports (almost) all of the
x3270 features. c3270 scripts are compatible with x3270 scripts,
and the subset of command line options and resource definitions are
also compatible.
</p><p>
s3270 is a scripting-only version of x3270. This program is intended
primarily for writing "screen-scraping" applications, for example a CGI
back-end script that retrieves database information from a mainframe.
</p><p>
tcl3270 is a Tcl-based 3270 scripting engine. It lets you write Tcl
scripts that manipulate 3270 sessions, and is quite a bit easier to
set up and use than s3270.
</p><p>
pr3287 is the printer companion for the above tools, and allows
printer output from a 3270 session to be directed to a Unix printer
queue.
</p><p>
x026 is a fun toy which emulates an x026 puncher.
</p>
-Des:
##----------------------------------------
=Pkg: xabacus 7.2.5 13 i586
=Sum: X-based abacus
+Des:
<!-- DT:Rich -->
<p>There are books on how to use an abacus, but basically all it does
is add and subtract, the rest you have to do in your head. Essentially,
this is a proof by induction that a computer is more powerful than an
abacus, since a computer program can contain an abacus. (But then again,
you can simulate a computer within a computer, so what does that show).
Actually, with a real abacus, one can move more than one row at a time
with 10 fingers. But on the other hand, a real abacus does not have
the current sum displayed as an integer.
</p>
-Des:
##----------------------------------------
=Pkg: xaos 3.1 202 i586
=Sum: Powerful fractal generator
+Des:
<!-- DT:Rich -->
<p>XaoS is a fast portable real-time interactive fractal zoomer.
It displays the Mandelbrot set (among other escape time fractals) and
allows you to zoom smoothly into the fractal. Various coloring modes
are provided for both the points inside and outside the selected set.
In addition, switching between Julia and Mandelbrot fractal types and
displaying planes is provided.
</p>
-Des:
##----------------------------------------
=Pkg: xaw3d 1.5E 263 i586
=Sum: 3D Athena Widgets
+Des:
<!-- DT:Rich -->
<p>This is a library that can be used instead of the standard
Athena-Widget-Library. It has tried to keep the standard of the libXaw
library.
There are also programs which explicitly use this library (this is
the reason why the library was included).
</p><p>
NOTE: Do NOT replace /usr/X11R6/lib/libXaw.so.6.1!
</p>
-Des:
##----------------------------------------
=Pkg: xawtv 3.95 25 i586
=Sum: Video4Linux TV application (Athena)
+Des:
<!-- DT:Rich -->
<p>xawtv is an X Window System application for watching TV with your Linux computer. It
supports video4linux devices (for example bttv cards, various USB
webcams, and more). It uses the Athena widgets.
</p>
-Des:
##----------------------------------------
=Pkg: xbanner 1.31 896 i586
=Sum: X Window System background writings and images
+Des:
<!-- DT:Rich -->
<p>How about your company's name in the background of the login screen? Or
your company's logo? It will work with xbanner which is designed
for use with, for example, XDM login screens.
</p><p>
Many example configurations may be found in /usr/share/xbanner
and its subdirectories.
</p><p>
Documentation lies in /usr/share/doc/packages/xbanner. There
you can find an HTML version of the documents.
</p>
-Des:
##----------------------------------------
=Pkg: xbase 2.0.0 141 i586
=Sum: XBase Compatible C++ Class Library
+Des:
<!-- DT:Rich -->
<p>This is an XBase (dBase and FoxPro, for example) compatible C++ class library.
</p><p>
This package contains header files, a library, some command line tools,
and developer documentation.
</p>
-Des:
##----------------------------------------
=Pkg: xboard 4.2.7 81 i586
=Sum: X Window System Interface for GNU Chess
+Des:
<!-- DT:Rich -->
<p>Xboard is a GUI interface for GNU Chess.
</p>
-Des:
##----------------------------------------
=Pkg: xbsql 0.11 138 i586
=Sum: SQL Wrapper for the XBase Library
+Des:
<!-- DT:Rich -->
<p>XBase DBMS is a C++ library that supports access to XBase type data files and indexes (.dbf and related files, for example). It provides record level access to these files.
</p>
-Des:
##----------------------------------------
=Pkg: xcdroast 0.98alpha15 80 i586
=Sum: CD writing software with graphical user interface
+Des:
<!-- DT:Rich -->
<p>X-CD-Roast allows you to create and copy CDs with a few simple mouse clicks
and without having to study long command-line parameters.
</p>
-Des:
##----------------------------------------
=Pkg: xchat 2.6.6 23 i586
=Sum: An IRC Client
+Des:
<!-- DT:Rich -->
<p>X-Chat is yet another IRC client for the X Window System. It uses the Gtk+
toolkit. It is easy to use compared to the other Gtk+ IRC clients
and it has a nicely designed interface.
</p>
-Des:
##----------------------------------------
=Pkg: xclass 0.9.2 18 i586
=Sum: Library for Uniform Presentation of fvwm95 Programs
+Des:
<!-- DT:Rich -->
<p>This package contains a library for uniform presentation of fvwm95 programs.
</p>
-Des:
##----------------------------------------
=Pkg: xcompmgr 051031 33 i586
=Sum: composite manager
+Des:
<!-- DT:Rich -->
<p>The application can be used to draw shadows around the windows or to make
windows translucent.
</p><p>
You have to enable the EXPERIMENTAL composite extension in your X server configuration first.
</p><p>
The application gets by default used in a KDE environment. You can also make
windows translucent via the context menu on the window border.
</p>
-Des:
##----------------------------------------
=Pkg: xdelta 1.1.3 42 i586
=Sum: Binary delta generator and RCS replacement library
+Des:
<!-- DT:Rich -->
<p>Xdelta is a binary delta generator and RCS replacement library. The delta algorithm is faster than GNU diff for text files and works on binary files, too.
</p>
-Des:
##----------------------------------------
=Pkg: xdg-menu 0.2 84 i586
=Sum: XDG Menus for WindowMaker and other Window Managers
+Des:
<!-- DT:Rich -->
<p>This package contains a Perl script which converts XDG menus
to formats used by WindowMaker and other window managers.
</p>
-Des:
##----------------------------------------
=Pkg: xdmbgrd 0.6 21 i586
=Sum: SuSE Linux background
+Des:
<!-- DT:Rich -->
<p>The SuSE Linux background for your XDM workstation.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs 21.5.27.20060705 26 i586
=Sum: XEmacs
+Des:
<!-- DT:Rich -->
<p>This is the current version of XEmacs, formerly known as Lucid-Emacs.
It is related to other versions of Emacs, in particular GNU Emacs. Its
emphasis is on modern graphical user interface support and an open
software development model, similar to Linux.
</p><p>
Lisp macros are not necessarily interchangeable between GNU-Emacs and
XEmacs. This is mainly important for translated .elc files and the key
macros.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs-info 21.5.27.20060705 26 i586
=Sum: Info Files for XEmacs
+Des:
<!-- DT:Rich -->
<p>This package contains all info files for XEmacs.
All these files can be read online with XEmacs and describe
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
This package contains the Xen Hypervisor. (tm)
</p><p>
Modern computers are sufficiently powerful to use virtualization to present the illusion of many smaller virtual machines (VMs), each running a separate operating system instance. Successful partitioning of a machine to support the concurrent execution of multiple operating systems poses several challenges. Firstly, virtual machines must be isolated from one another: It is not acceptable for the execution of one to adversely affect the performance of another. This is particularly true when virtual machines are owned by mutually untrusting users. Secondly, it is necessary to support a variety of different operating systems to accommodate the heterogeneity of popular applications. Thirdly, the performance overhead introduced by virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for your hardware (except for CPU and memory). This job is left to the kernel that's running in domain 0. Thus the domain 0 kernel is privileged; it has full hardware access. It's started immediately after Xen starts up. Other domains have no access to the hardware; instead they use virtual interfaces that are provided by Xen (with the help of the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD (Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich) exist. A port of Windows XP was developed for an earlier version of Xen, but is not available for release due to license restrictions.
</p><p>
In addition to this package you need to install the kernel-xen and xen-tools to use Xen. Xen 3 also supports running unmodified guests using full virtualization, if appropriate hardware is present. Install xen-tools-ioemu if you want to use this.
</p><p>
[Hypervisor is a trademark of IBM]
</p>
-Des:
##----------------------------------------
=Pkg: xen-doc-html 3.0.3_11774 20 i586
=Sum: Xen Virtualization: HTML documentation
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
xen-doc-html contains the online documentation in HTML format.
Point your browser at
file:/usr/share/doc/packages/xen/html/
</p>
-Des:
##----------------------------------------
=Pkg: xen-doc-pdf 3.0.3_11774 20 i586
=Sum: Xen Virtualization: PDF documentation
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
xen-doc-pdf contains the online documentation in PDF format.
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
xen-doc-ps contains the online documentation in PostScript format.
Use gv/kghostview/... to read the files in
/usr/share/doc/packages/xen/ps/
</p>
-Des:
##----------------------------------------
=Pkg: xen-libs 3.0.3_11774 20 i586
=Sum: Xen Virtualization: Libraries
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
This package contains the libraries used to interact with the Xen virtual machine monitor.
</p><p>
Modern computers are sufficiently powerful to use virtualization to present the illusion of many smaller virtual machines (VMs), each running a separate operating system instance. Successful partitioning of a machine to support the concurrent execution of multiple operating systems poses several challenges. Firstly, virtual machines must be isolated from one another: It is not acceptable for the execution of one to adversely affect the performance of another. This is particularly true when virtual machines are owned by mutually untrusting users. Secondly, it is necessary to support a variety of different operating systems to accommodate the heterogeneity of popular applications. Thirdly, the performance overhead introduced by virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for your hardware (except for CPU and memory). This job is left to the kernel that's running in domain 0. Thus the domain 0 kernel is privileged; it has full hardware access. It's started immediately after Xen starts up. Other domains have no access to the hardware; instead they use virtual interfaces that are provided by Xen (with the help of the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD (Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich) exist. A port of Windows XP was developed for an earlier version of Xen, but is not available for release due to license restrictions.
</p>
-Des:
##----------------------------------------
=Pkg: xen-tools 3.0.3_11774 20 i586
=Sum: Xen Virtualization: Control tools for domain 0
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
This package contains the control tools that allow you to start, stop, migrate, and manage virtual machines.
</p><p>
Modern computers are sufficiently powerful to use virtualization to present the illusion of many smaller virtual machines (VMs), each running a separate operating system instance. Successful partitioning of a machine to support the concurrent execution of multiple operating systems poses several challenges. Firstly, virtual machines must be isolated from one another: It is not acceptable for the execution of one to adversely affect the performance of another. This is particularly true when virtual machines are owned by mutually untrusting users. Secondly, it is necessary to support a variety of different operating systems to accommodate the heterogeneity of popular applications. Thirdly, the performance overhead introduced by virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for your hardware (except for CPU and memory). This job is left to the kernel that's running in domain 0. Thus the domain 0 kernel is privileged; it has full hardware access. It's started immediately after Xen starts up. Other domains have no access to the hardware; instead they use virtual interfaces that are provided by Xen (with the help of the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD (Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich) exist. A port of Windows XP was developed for an earlier version of Xen, but is not available for release due to license restrictions.
</p><p>
In addition to this package you need to install kernel-xen and xen to use Xen.
</p>
-Des:
##----------------------------------------
=Pkg: xen-tools-ioemu 3.0.3_11774 20 i586
=Sum: Xen Virtualization: BIOS and device emulation for unmodified guests
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
This package contains the needed BIOS and device emulation code to support unmodified guests. (You need virtualization support in hardware to make use of this.)
</p><p>
Modern computers are sufficiently powerful to use virtualization to present the illusion of many smaller virtual machines (VMs), each running a separate operating system instance. Successful partitioning of a machine to support the concurrent execution of multiple operating systems poses several challenges. Firstly, virtual machines must be isolated from one another: It is not acceptable for the execution of one to adversely affect the performance of another. This is particularly true when virtual machines are owned by mutually untrusting users. Secondly, it is necessary to support a variety of different operating systems to accommodate the heterogeneity of popular applications. Thirdly, the performance overhead introduced by virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for your hardware (except for CPU and memory). This job is left to the kernel that's running in domain 0. Thus the domain 0 kernel is privileged; it has full hardware access. It's started immediately after Xen starts up. Other domains have no access to the hardware; instead they use virtual interfaces that are provided by Xen (with the help of the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD (Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich) exist. A port of Windows XP was developed for an earlier version of Xen, but is not available for release due to license restrictions.
</p><p>
In addition to this package you need to install kernel-xen, xen, and xen-tools to use Xen.
</p>
-Des:
##----------------------------------------
=Pkg: xfig 3.2.4 111 i586
=Sum: Facility for Interactive Generation of Figures under the X Window System
+Des:
<!-- DT:Rich -->
<p>Xfig is a menu-driven tool that allows the user to draw and manipulate objects
interactively in an X Window System window. The resulting pictures can be saved, printed
on PostScript printers, or converted to a variety of other formats (to
allow inclusion in LaTeX documents, for example).
</p><p>
</p><p>
Documentation: /usr/share/doc/packages/xfig & man xfig
=Sum: Administrative Utilities for the XFS File System
+Des:
<!-- DT:Rich -->
<p>The xfsdump package contains xfsdump, xfsrestore, and a number of
other utilities for administering XFS file systems.
</p><p>
</p><p>
xfsdump examines files in a file system, determines which files need to be
backed up, and copies those files to a specified disk, tape, or other
storage medium. It uses XFS-specific directives for optimizing the
dump of an XFS file system and also knows how to backup XFS extended
attributes. Backups created with xfsdump are "endian safe" and can
thus be transferred between Linux machines of different architectures
and also between IRIX machines.
</p><p>
</p><p>
xfsrestore performs the inverse function of xfsdump. It can restore a
full backup of a file system. Subsequent incremental backups can then
be layered on top of the full backup. Single files and directory
subtrees may be restored from full or partial backups.
</p>
-Des:
##----------------------------------------
=Pkg: xfsprogs 2.8.11_1 11 i586
=Sum: Utilities for managing the XFS file system
+Des:
<!-- DT:Rich -->
<p>A set of commands to use the XFS file system, including mkfs.xfs.
</p><p>
</p><p>
XFS is a high performance journaling file system which originated
on the SGI IRIX platform. It is completely multithreaded. It can
support large files and large file systems, extended attributes,
and variable block sizes.It is extent based and makes extensive use of
Btrees (directories, extents, and free space) to aid both performance
and scalability.
</p><p>
</p><p>
Refer to the documentation at http://oss.sgi.com/projects/xfs/
for complete details. This implementation is on-disk compatible
with the IRIX version of XFS.
</p>
-Des:
##----------------------------------------
=Pkg: xgl cvs_060522 39 i586
=Sum: Xserver that uses OpenGL for its drawing operations.
+Des:
<!-- DT:Rich -->
<p>Xgl is an Xserver that uses OpenGL for its drawing operations. Some operations like antialiased font rendering is noticably faster with this technology, and future graphics hardware might only have support for 3D operations and no 2D core any more.
</p><p>
Note that this is highly experimental code, it has been tested only on few hardware platforms, and depending on driver state it may even crash your computer.
</p>
-Des:
##----------------------------------------
=Pkg: xgrabsc 2.41 1062 i586
=Sum: A Screen Grabber for the X Window System.
+Des:
<!-- DT:Rich -->
<p>You need screenshots?
</p><p>
xgrab and xgrabsc are powerful tools to save screenshots in
files (ps, xpm, and more) or to print them. xgrabsc is invoked from a
shell and sends the rectangle grabbed on the screen to standard
output. xgrab is a menu-driven front-end to xgrabsc.
</p><p>
This program works only in PPM, XPM, and
non-color PostScript formats for display larger then 8 bits per pixel deep.
</p><p>
Documentation may be obtained by typing man xgrab and man xgrabsc. The
author's original comments can be found in /usr/share/doc/packages/xgrabsc.
</p>
-Des:
##----------------------------------------
=Pkg: xine-lib 1.1.2 39 i586
=Sum: Video Player with Plug-Ins
+Des:
<!-- DT:Rich -->
<p>Xine is a video player with a graphical front-end that supports a large number of file formats (VCD and MPEG2, for example) using plug-ins. Several plug-ins are included. Others can be installed after Xine installation. Xine supports stereo sound using OSS and AC5.1 using Alsa.
</p><p>
This version of Xine may lack certain features because of legal requirements (potential patent violation).
See http://www.opensuse.org/XINE#Legal_Matters
</p><p>
More information about Xine plug-ins can be found at
http://www.xinehq.de/
</p>
-Des:
##----------------------------------------
=Pkg: xine-ui 0.99.4 72 i586
=Sum: video player with plugins
+Des:
<!-- DT:Rich -->
<p>Xine is a video player with a graphical front-end that supports a large number of file formats (i.e., VCD, MPEG2) using plug-ins. Several plug-ins are included. Others can be post-installed. Supports stereo sound using OSS and AC5.1 using Alsa.
</p><p>
This version of xine may lack certain features because of legal requirements (potential patent violation).
See also http://www.opensuse.org/XINE#Legal_Matters
</p><p>
More information about Xine plug-ins can be found at
http://www.xinehq.de/
</p>
-Des:
##----------------------------------------
=Pkg: xinetd 2.3.14 32 i586
=Sum: An 'inetd' with Expanded Functionality
+Des:
<!-- DT:Rich -->
<p>xinetd takes the abilities of inetd and appends additional
functionality:
</p><p>
<ul>
<li>Access Control
</li><li>Prevention of 'denial of access' attacks
</li><li>Extensive logging abilities
</li><li>Clear configuration file
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: xiterm 0.5.20040304 66 i586
=Sum: Internationalized Terminal Emulator for X11
+Des:
<!-- DT:Rich -->
<p>Internationalized Terminal Emulator for X11
</p>
-Des:
##----------------------------------------
=Pkg: xjdic 2.4 132 i586
=Sum: Japanese-English Dictionary Interface
+Des:
<!-- DT:Rich -->
<p>XJDIC is an electronic Japanese-English dictionary program designed to operate a Japanese capable terminal:
"kterm" under the X Window System, for example.
</p><p>
It is based on JDIC and JREADER which were developed to run under MS-DOS on IBM PCs or clones.
</p><p>
XJDIC functions as:
<ol>
<li>an English to Japanese dictionary (eiwa jiten).
</li><li>a Japanese to English dictionary (waei jiten).
</li><li>a Japanese-English Character dictionary
(kanei jiten), capable of selecting Kanji characters
by JIS code, radical, stroke count, Nelson Index
number, or reading, and displaying compounds containing
that Kanji.
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: xjdic-data 2.4 132 i586
=Sum: Data Files Needed by XJDIC and Gjiten
+Des:
<!-- DT:Rich -->
<p>This packages contains several data files needed by XJDIC and
Gjiten. XJDIC and Gjiten are programs used to access the
Japanese-English EDICT dictionaries.
</p>
-Des:
##----------------------------------------
=Pkg: xjdic-indices 2.4 132 i586
=Sum: EDICT Index Files Needed by XJDIC and Gjiten
+Des:
<!-- DT:Rich -->
<p>This package contains index files for the
Japanese-English EDICT dictionaries. These index files are necessary to run XJDIC or Gjiten, which can be used to
access EDICT.
</p>
-Des:
##----------------------------------------
=Pkg: xli 20050904 37 i586
=Sum: X11 Image Loading Utility
+Des:
<!-- DT:Rich -->
<p>xli is a version of xloadimage.
</p><p>
This utility will view several types of images under X11, or load
images onto the X11 root window.
</p>
-Des:
##----------------------------------------
=Pkg: xlockmore 5.23 11 i586
=Sum: Screen Saver and Locker for the X Window System
+Des:
<!-- DT:Rich -->
<p>The xlock utility locks your X Window System session and runs a screen saver
until a password is entered.
</p>
-Des:
##----------------------------------------
=Pkg: xlogical 1.0.7 996 i586
=Sum: Puzzle Game
+Des:
<!-- DT:Rich -->
<p>XLogical is a puzzle game based on an Amiga game developed by Rainbow
Arts called Logical.
</p>
-Des:
##----------------------------------------
=Pkg: xmahjong 2006.8.10 25 i586
=Sum: Mahjongg for X
+Des:
<!-- DT:Rich -->
<p>Mahjongg is a challenging Chinese game similar to domino. It is
usually played by four players.
Xmahjongg is the solitaire version designed for the X Window System.
More can be found in the appropriate manual page.
</p>
-Des:
##----------------------------------------
=Pkg: xmgrace 5.1.19 36 i586
=Sum: A 2D-plot-program for Visualisation of Scientific Data
+Des:
<!-- DT:Rich -->
<p>xmgrace helps to create graphics from scientific data. It knows a lot of
different graph types and supports a lot of output formats.
</p><p>
For examples, see /usr/X11R6/lib/xmgrace/examples.
</p>
-Des:
##----------------------------------------
=Pkg: xmlstarlet 1.0.1 33 i586
=Sum: Command Line Tool to Process XML Documents
+Des:
<!-- DT:Rich -->
<p>XMLStarlet is a command line XML toolkit that can be used to transform,
query, validate, and edit XML documents and files using a simple set of shell
commands, which work similarly to 'grep', 'sed', 'awk', 'tr', 'diff', or 'patch' on plain text files.
</p>
-Des:
##----------------------------------------
=Pkg: xmltex 2002.6.26 264 i586
=Sum: Typesetting XML with TeX
+Des:
<!-- DT:Rich -->
<p>xmltex is a system for typesetting XML files with TeX. It may be used
on its own or in conjunction with another TeX format. (LaTeX is
assumed for most examples).
</p><p>
xmltex supports the XML Namespace Recommendation. Arbitrary prefixes
may be used in document instances and in definition files. It
supports any encoding that matches ASCII in the first 127 positions.
UTF-8, latin-1, and KOI8-R are included in the distribution. Other
encodings may be trivially added.
</p><p>
Further documentation may be obtained by running manual.tex through
LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: xmlto 0.0.18 61 i586
=Sum: Tool for Converting XML Files to Various Formats
+Des:
<!-- DT:Rich -->
<p>This is a package for converting XML files to various formats using XSL
stylesheets. As a processor it depends on xsltproc and as a formatter for print output it makes use of passivetex.
</p>
-Des:
##----------------------------------------
=Pkg: xmms 1.2.10 131 i586
=Sum: The extensible media player
+Des:
<!-- DT:Rich -->
<p>Xmms is a media player for the X Window System that supports Winamp skins and that has a sophisticated
plugin system that allows for easy extension of its abilities. Xmms is able to
deal with all common types of media files.
</p><p>
You might want to have a look at the xmms-plugins package which contains a large
number of effect, input, output, and visualization plugins for xmms.
</p>
-Des:
##----------------------------------------
=Pkg: xmms-gnome2 0 556 i586
=Sum: XMMS Applet for the GNOME 2.x Desktop
+Des:
<!-- DT:Rich -->
<p>An XMMS applet that allows you to launch and control XMMS from the GNOME 2.x Desktop panel.
</p>
-Des:
##----------------------------------------
=Pkg: xmms-jack 0.17 14 i586
=Sum: Jack Audio Output Plug-In for XMMS
+Des:
<!-- DT:Rich -->
<p>XMMS audio output plug-in for the Jack sound daemon.
</p>
-Des:
##----------------------------------------
=Pkg: xmms-kde 3.1 99 i586
=Sum: XMMS Control Applet for the KDE Panel
+Des:
<!-- DT:Rich -->
<p>This is a small applet to control XMMS. It docks in the KDE
panel (Kicker). This package also includes an aRts output plug-in,
so that XMMS can play sounds through the aRts server.
</p>
-Des:
##----------------------------------------
=Pkg: xmms-lib 1.2.10 131 i586
=Sum: The extensible media player
+Des:
<!-- DT:Rich -->
<p>Xmms is a media player for the X Window System that supports Winamp skins and that has a sophisticated
plugin system that allows for easy extension of its abilities. Xmms is able to
deal with all common types of media files.
</p><p>
You might want to have a look at the xmms-plugins package which contains a large
number of effect, input, output, and visualization plugins for xmms.
</p>
-Des:
##----------------------------------------
=Pkg: xmms-plugins 1.2.10 77 i586
=Sum: XMMS plugins
+Des:
<!-- DT:Rich -->
<p>This package contains various skins, visualization, effect, input, and
output plug-ins for the XMMS media player.
</p>
-Des:
##----------------------------------------
=Pkg: xmorph 20060817 23 i586
=Sum: A morphing program
+Des:
<!-- DT:Rich -->
<p>This morphing program reads two images in Targa format and computes
the transitions from one image to the other (arbitrarily many steps).
To avoid a simple fading effect, the program needs information about
the shapes contained in the two images. This is done by using a grid
consisting of connected checkpoints. The source grid is then
transformed into the destination grid during the morphing process.
</p>
-Des:
##----------------------------------------
=Pkg: xmoto 0.2.2 19 i586
=Sum: X-Moto
+Des:
<!-- DT:Rich -->
<p>X-Moto is a challenging 2D motocross platform game, where physics play
an all important role in the gameplay. You need to control your bike
to its limit, if you want to have a chance finishing the more
difficult of the challenges. First you'll try just to complete the
levels, while later you'll compete with yourself and others, racing
against the clock.
</p>
-Des:
##----------------------------------------
=Pkg: xmountains 2.7 38 i586
=Sum: Fractal landscape in the background
+Des:
<!-- DT:Rich -->
<p>Xmountains is a fractal terrain generator written by Stephen Booth.
It can be configured to calculate new 'mountains' in a certain period
of time.
</p>
-Des:
##----------------------------------------
=Pkg: xmset 1.2 41 i586
=Sum: A Small Command Line Tool for Mouse Configuration
+Des:
<!-- DT:Rich -->
<p>xmset can be used to apply new mouse definitions to the
currently active X session.
</p>
-Des:
##----------------------------------------
=Pkg: xntp 4.2.2p4 6 i586
=Sum: Network Time Protocol daemon (version 4)
+Des:
<!-- DT:Rich -->
<p>The Network Time Protocol (NTP) is used to synchronize the time of a
computer client or server to another server or reference time source, such
as a radio, satellite receiver, or modem.
</p><p>
Ntpd is an operating system daemon that sets and maintains the system
time-of-day synchronized with Internet standard time servers.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11 7.2 26 i586
=Sum: X.Org core and sample applications
+Del:
<!-- DT:Rich -->
<p>You need this package if you want to run the X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org core and sample applications.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-Xvnc 7.1 22 i586
=Sum: VNC Server for the X Window System
+Des:
<!-- DT:Rich -->
<p></p><p>
An X Window System server for Virtual Network Computing (VNC).
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-devel 7.2 19 i586
=Sum: Include Files and Libraries mandatory for X11 Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-driver-input 7.2 19 i586
=Sum: X.Org input drivers
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains X.Org input drivers.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-driver-video 7.2 33 i586
=Sum: X.Org video drivers
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains X.Org video drivers.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-fonts-devel 7.2 8 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libICE 7.2 13 i586
=Sum: X.Org ICE library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org ICE library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libICE-devel 7.2 13 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libSM 7.2 12 i586
=Sum: X.Org SM library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org SM library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libSM-devel 7.2 12 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libX11 7.2 13 i586
=Sum: X.Org X11 library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org X11 library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libX11-ccache 7.2 12 i586
=Sum: X.Org compose cache
+Des:
<!-- DT:Rich -->
<p></p><p>
Cache for X.Org compose files.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libX11-devel 7.2 13 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXau 7.2 8 i586
=Sum: X.Org Xau library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xau library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXau-devel 7.2 8 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXdmcp 7.2 8 i586
=Sum: X.Org Xdmcp library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xdmcp library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXdmcp-devel 7.2 8 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXext 7.2 12 i586
=Sum: X.Org Xext library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xext library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXext-devel 7.2 12 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXfixes 7.2 13 i586
=Sum: X.Org Xfixes library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xfixes library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXfixes-devel 7.2 13 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXmu 7.2 13 i586
=Sum: X.Org Xmu library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xmu library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXmu-devel 7.2 13 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXp 7.2 8 i586
=Sum: X.Org Xp library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xp library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXp-devel 7.2 8 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXpm 7.2 12 i586
=Sum: X.Org Xpm library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xpm library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXpm-devel 7.2 12 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXprintUtil 7.2 8 i586
=Sum: X.Org XprintUtil library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org XprintUtil library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXprintUtil-devel 7.2 8 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXrender 7.2 12 i586
=Sum: X.Org Xrender library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xrender library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXrender-devel 7.2 12 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXt 7.2 13 i586
=Sum: X.Org Xt library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xt library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXt-devel 7.2 13 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXv 7.2 8 i586
=Sum: X.Org Xv library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xv library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXv-devel 7.2 8 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libfontenc 7.2 12 i586
=Sum: X.Org fontenc library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org fontenc library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libfontenc-devel 7.2 12 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libs 7.2 19 i586
=Sum: Remaining X.Org libraries
+Del:
<!-- DT:Rich -->
<p>You need this package if you want to run the X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the remaining X.Org libraries.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxkbfile 7.2 12 i586
=Sum: X.Org xkbfile library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org xkbfile library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxkbfile-devel 7.2 12 i586
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-proto-devel 7.2 10 i586
=Sum: Include Files and Libraries mandatory for X11 Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-server 7.2 30 i586
=Sum: X.Org Server
+Del:
<!-- DT:Rich -->
<p>You need this package if you want to run the X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Server.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-server-sdk 7.2 30 i586
=Sum: X.Org Server SDK.
+Del:
<!-- DT:Rich -->
<p>You need this package if you want to run the X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Server SDK.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-util-devel 7.2 8 i586
=Sum: Include Files and Libraries mandatory for X11 Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-xtrans-devel 7.2 12 i586
=Sum: Include Files and Libraries mandatory for X11 Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xosd 2.2.12 38 i586
=Sum: X On-Screen Display library
+Des:
<!-- DT:Rich -->
<p>A library for displaying a TV-like on-screen display in X.
</p>
-Des:
##----------------------------------------
=Pkg: xosview 1.8.3 25 i586
=Sum: System Load Information
+Des:
<!-- DT:Rich -->
<p>A small program which is mostly configurable using
resources via ~/.Xresources. It shows actual CPU, swap, memory, active
interrupts, and, if desired, netpacket statistics in a graphical manner.
</p>
-Des:
##----------------------------------------
=Pkg: xournal 0.3 33 i586
=Sum: Xournal is an application for notetaking, sketching, keeping a journal using a stylus
+Des:
<!-- DT:Rich -->
<p>Xournal is an application for notetaking, sketching, keeping a journal using a stylus. It is free software (GNU GPL) and runs on Linux (recent distributions) and other GTK+/Gnome platforms. It is similar to Microsoft Windows Journal or to other alternatives such as Jarnal and Gournal.
</p>
-Des:
##----------------------------------------
=Pkg: xpdf 3.01 48 i586
=Sum: A PDF File Viewer for the X Window System
+Des:
<!-- DT:Rich -->
<p>This tool is used for viewing PDF (Portable Document Format) files.
It is designed to be small and efficient.
</p>
-Des:
##----------------------------------------
=Pkg: xpdf-tools 3.01 48 i586
=Sum: Character maps and config files required by xpdf
+Des:
<!-- DT:Rich -->
<p>Character maps and config files required by xpdf
</p>
-Des:
##----------------------------------------
=Pkg: xpenguins 2.2 663 i586
=Sum: cute little penguins that walk along the tops of your windows
+Des:
<!-- DT:Rich -->
<p>This program animates a friendly family of penguins on your root
window. They drop in from the top of the screen, walk along the tops
of your windows, up the sides of your windows, up the side of the
screen, and sometimes even levitate with their genetically-modified
go-go-gadget 'copter ability.
</p>
-Des:
##----------------------------------------
=Pkg: xpp 1.5 48 i586
=Sum: CUPS X Window System front-end
+Des:
<!-- DT:Rich -->
<p>A front-end for the CUPS printer daemon. You can change and save the used printer, paper settings, and other options. It only requires the X Window System - no Gnome or KDE.
</p>
-Des:
##----------------------------------------
=Pkg: xrestop 0.4 22 i586
=Sum: XResTop is A 'top' like tool for monitoring X Client server resource usage.
+Des:
<!-- DT:Rich -->
<p>Xrestop uses the X-Resource extension to provide 'top' like statistics of each connected X11 client's server side resource usage. It is intended as a developer tool to aid more efficient server resource usage and debug server side leakage.
</p>
-Des:
##----------------------------------------
=Pkg: xsane 0.991 32 i586
=Sum: A GTK-Based Graphical Scanning Front-End for SANE
+Des:
<!-- DT:Rich -->
<p>XSane does not support any scanners itself. XSane uses the SANE library to talk to scanners that are supported by SANE.
</p><p>
XSane is designed for acquiring images with scanners (there are other devices like cameras and video devices supported by SANE, but XSane is not designed for that purpose). You can scan to file, make a photocopy, create a fax, and start XSane from the GIMP as a GIMP plug-in.
</p><p>
XSane may not work correctly or you may not be able to take full advantage of all functions if you do not configure XSane correctly. See the documentation at /usr/share/sane/xsane/doc/sane-xsane-doc.html.
</p><p>
The XSane home page is http://www.xsane.org/.
</p>
-Des:
##----------------------------------------
=Pkg: xscreensaver 5.01 14 i586
=Sum: A screen saver and locker for the X Window System
+Des:
<!-- DT:Rich -->
<p>The xscreensaver program waits until the keyboard and mouse have been idle for
a period of time, and then runs a graphics demo chosen at random. It turns off as soon
as there is any mouse or keyboard activity. It can also lock the screen
immediately, after a longer idle period, or on demand.
</p><p>
The xscreensaver package consists of two parts: the screensaver and the
"driver" or "daemon", which detects idleness and does locking,
and the many graphics demos that are launched by xscreensaver.
</p><p>
Any X program that can draw on the root window can be used with xscreensaver,
regardless of how that program is written, what language it is written in,
or what libraries it uses. The xscreensaver daemon takes care of detecting when
the user is idle, locking, and checking passwords and all the other
book-keeping. All the other programs need to do is draw.
</p><p>
The benefit that xscreensaver has over the combination of the xlock and
xautolock programs is the ease with which new graphic hacks can be installed.
You do not need to recompile (or even re-run) the xscreensaver program to add
a new display mode, you just change a config file.
</p>
-Des:
##----------------------------------------
=Pkg: xsidplay 1.6.5.2 40 i586
=Sum: X11 player for C64 music files
+Des:
<!-- DT:Rich -->
<p>This package allows you to play music from C64 games and demos on your PC
under the X11 environment.
</p><p>
You can find a comprehensive archive on the WWW at
http://www.hvsc.c64.org/
</p>
-Des:
##----------------------------------------
=Pkg: xskat 4.0 40 i586
=Sum: Skat, a card game
+Des:
<!-- DT:Rich -->
<p>Skat is a popular game in Germany. A card game for the X Window
System, with full featured network support. Also via IRC.
It follows the "Deutsche Skat-Ordnung" or with popular addition
strategies.
</p><p>
Now with "Ramsch", "Schieberamsch", "Revolution" and more...
</p><p>
If you like, start it with german menus with the command:
</p><p>
xskat -lang german
</p>
-Des:
##----------------------------------------
=Pkg: xsnow 1.42 293 i586
=Sum: A Christmas Animation
+Des:
<!-- DT:Rich -->
<p>A nice animation. Santa Claus drives across the screen,
pulled by his reindeer. It snows and the snow accumulates on top
of the windows.
</p>
-Des:
##----------------------------------------
=Pkg: xstroke 0.6 39 i586
=Sum: Fullscreen gesture recognition for X
+Des:
<!-- DT:Rich -->
<p>xstroke is a full-screen gesture recognition program for the X Window System.
It captures gestures performed with a pointer device, (such as a mouse, a
stylus, or a pen/tablet), recognizes the gestures and performs actions based on the gestures.
</p>
-Des:
##----------------------------------------
=Pkg: xterm 222 14 i586
=Sum: The basic X terminal program
+Des:
<!-- DT:Rich -->
<p>This package contains the basic X.Org terminal program.
</p>
-Des:
##----------------------------------------
=Pkg: xtermset 0.5.2 153 i586
=Sum: A program to change the settings of an xterm
+Des:
<!-- DT:Rich -->
<p>Xtermset allows you to change the characteristics of an
xterm window from the command line. Most options have the
same names as those that you would give an xterm at startup.
</p>
-Des:
##----------------------------------------
=Pkg: xv 3.10a 1113 i586
=Sum: GIF/TIFF/JPEG/PostScript Image Viewer
+Des:
<!-- DT:Rich -->
<p>XV is an interactive image viewer for the X Window System. XV
displays images in GIF, JPEG, TIFF, PNG, PBM, PGM, PPM, X Window System
bitmap, Utah Raster Toolkit RLE, PDS/VICAR, Sun Rasterfile, BMP, PCX,
IRIS RGB, XPM, Targa, XWD, possibly PostScript, and PM formats on
workstations and terminals running the X Window System Version 11.
</p><p>
XV can also manipulate pictures. It can zoom in
and out, rotate, and flip them. It also provides a wide
variety of operations to modify colors.
</p><p>
It is one of the most famous programs for Linux.
</p><p>
The documentation can be found in /usr/share/doc/packages/xv/.
</p><p>
Please remember that this program has shareware status for commercial use.
</p>
-Des:
##----------------------------------------
=Pkg: xvkbd 2.8 19 i586
=Sum: Virtual Keyboard for the X Window System
+Des:
<!-- DT:Rich -->
<p>Xvkbd is a virtual (graphical) keyboard program for the X Window System
which provides a facility to enter characters onto other clients
(software) by clicking on an on-screen keyboard.
</p>
-Des:
##----------------------------------------
=Pkg: xyaku 1.4.0 28 i586
=Sum: English-Japanese or English-Korean translation program for X11
+Des:
<!-- DT:Rich -->
<p>xyaku is an English-Japanese translation program and more under X11.
Furthermore, xyaku is yet another Web search engine front-end.
</p><p>
</p><p>
xyaku can also be used for English-Korean translation.
</p><p>
</p><p>
If you want to use it for English-Korean, please install also the
Korean-English dictionary "engdic" (engdic*.rpm).
</p><p>
</p><p>
If you want to use it for English-Japanese, please install also the
Japanese-English dictionary "edict" (edict*.rpm).
</p>
-Des:
##----------------------------------------
=Pkg: xzgv 0.8 154 i586
=Sum: A Fast Picture Viewer for the X Window System
+Des:
<!-- DT:Rich -->
<p>Xzgv is a picture viewer for the X Window System with a thumbnail-based file selector.
It uses GTK+ and Imlib. Most file formats are supported, and the
thumbnails used are compatible with xv, zgv, and the Gimp. It can also
be used with `xzgv file(s)', to effectively bypass the file selector.
For more on how xzgv works and how to use it, do `info xzgv' or `man
xzgv' once it is installed.
</p>
-Des:
##----------------------------------------
=Pkg: yafc 1.1.1 34 i586
=Sum: Yet Another FTP Client
+Des:
<!-- DT:Rich -->
<p>Yafc is an OpenSource console mode FTP client. It has support for Kerberos 4/5 authentication and sftp (ssh2). Other features include tab completion, directory cache, powerful aliases, recursive file commands and bookmarks with autologin.
</p>
-Des:
##----------------------------------------
=Pkg: yafray 0.0.8 36 i586
=Sum: YafRay: Yet Another Free RAYtracer
+Des:
<!-- DT:Rich -->
<p>A raytracer that cooperates well with the Blender package.
</p>
-Des:
##----------------------------------------
=Pkg: yast2 2.14.15 3 i586
=Sum: YaST2 - Main Package
+Ins:
<!-- DT:Rich -->
<p>YaST2 is a tool for installing and configuring the SuSE Linux system.
It provides easy administration capabilities.
Installation and configuration of the system by means of YaST2 is
explained in detail in the accompanying SuSe Linux handbook.
Installation with YaST2 cannot be done without this package.
</p>
-Ins:
+Del:
<!-- DT:Rich -->
<p>YaST2 is a tool for installing and configuring the SuSE Linux system.
It provides easy administration capabilities.
Installation and configuration of the system by means of YaST2 is
explained in detail in the accompanying SuSe Linux handbook.
Installation with YaST2 cannot be done without this package.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>This package contains scripts and data needed for SuSE Linux
installation with YaST2
</p>
-Des:
##----------------------------------------
=Pkg: yast2-bootfloppy 2.14.14 3 i586
=Sum: YaST2 - Boot Floppy Creation
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for creating boot floppy disks.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-bootloader 2.14.14 3 i586
=Sum: YaST2 - Bootloader Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for bootloader configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-control-center 2.14.1 6 i586
=Sum: YaST2 - Control Center
+Des:
<!-- DT:Rich -->
<p>This package contains the menu selection component for YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-core 2.14.4 9 i586
=Sum: YaST2 - Core Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the scanner, parser, and interpreter runtime
library for the YCP scripting language used in YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-core-devel 2.14.4 9 i586
=Sum: YaST2 - Include Files and Documentation for Core Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains include and documentation files for developing
applications using the YaST2 YCP interpreter.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-country 2.14.5 10 i586
=Sum: YaST2 - Country Settings (Language, Keyboard, and Timezone)
+Des:
<!-- DT:Rich -->
<p>Country specific data and configuration modules (language, keyboard, timezone) for yast2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-hardware-detection 2.14.0 6 i586
=Sum: YaST2 Hardware Detection Interface
+Des:
<!-- DT:Rich -->
<p>This package contains the hardware detection library for YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ldap 2.14.0 12 i586
=Sum: YaST2 - LDAP Agent
+Des:
<!-- DT:Rich -->
<p>This agent is used by various YaST2 modules to work with LDAP. It enables searching the LDAP tree and adding/deleting/modifying items on an LDAP server.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-mouse 2.14.1 8 i586
=Sum: YaST2 - Mouse Configuration
+Des:
<!-- DT:Rich -->
<p>A Mouse configuration module to be called from the YaST2 control center.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ncurses 2.14.4 3 i586
=Sum: YaST2 - Character Based User Interface
+Des:
<!-- DT:Rich -->
<p>This package contains the character based (ncurses) user interface
component for YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-network 2.14.12 3 i586
=Sum: YaST2 - Network Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for network configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-nis-client 2.14.0 12 i586
=Sum: YaST2 - Network Information Services (NIS, YP) Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for NIS configuration.
NIS is a service similar to yellow pages.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-packager 2.14.10 3 i586
=Sum: YaST2 - Package Library
+Des:
<!-- DT:Rich -->
<p>This package contains the scanner/parser and dependency checker for all
packages handled by YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-perl-bindings 2.14.0 9 i586
=Sum: YaST2 - Perl Bindings
+Des:
<!-- DT:Rich -->
<p>This adds an embedded Perl interpreter to YaST2 as a plug-in (in other words it will be loaded only if required). This is a very efficient way of calling Perl from within YaST2 YCP scripts.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-pkg-bindings 2.14.4 5 i586
=Sum: YaST2 Package Manager Access
+Des:
<!-- DT:Rich -->
<p>This package contains a name space for accessing
the package manager library in YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-power-management 2.14.3 7 i586
=Sum: YaST2 - Power Management Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for Power management configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-printer 2.14.15 3 i586
=Sum: YaST2 - Printer Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for printer configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-profile-manager 2.14.1 12 i586
=Sum: YaST2 Profile Configuration
+Des:
<!-- DT:Rich -->
<p>This module is used to configure various settings for SCPM (System Configuration Profile Management), which allows you to store different profiles of your system
configuration and switch between them.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-qt 2.14.3 5 i586
=Sum: YaST2 - Graphical User Interface
+Des:
<!-- DT:Rich -->
<p>One of several user interfaces available for YaST2, based on Qt and the X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-slp 2.14.1 5 i586
=Sum: SLP Agent and Browser for YaST
+Des:
<!-- DT:Rich -->
<p>This modules enables YaST modules to register services with SLP. Additionally it offers a simple browser of SLP registered services.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-sound 2.14.0 10 i586
=Sum: YaST2 - Sound Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for sound card configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-storage 2.14.18 3 i586
=Sum: YaST2 - Storage Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the files for YaST2 that handle access to disk devices during
installation and on an installed system.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-storage-evms 2.14.18 3 i586
=Sum: YaST2 - Storage Configuration EVMS
+Des:
<!-- DT:Rich -->
<p>This package contains the files that handle EVMS configuration within YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-storage-lib 2.14.18 3 i586
=Sum: YaST2 - Storage Configuration Library
+Des:
<!-- DT:Rich -->
<p>This package contains the library used by YaST2 to access disk devices during
installation and on an installed system.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-transfer 2.14.0 10 i586
=Sum: YaST2 - Agent for Various Transfer Protocols
+Des:
<!-- DT:Rich -->
<p>A YaST2 Agent for various Transfer Protocols: FTP, HTTP, and TFTP.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-tune 2.14.0 10 i586
=Sum: YaST2 - Hardware Tuning
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for hardware configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-update 2.14.7 12 i586
=Sum: YaST2 - Update
+Des:
<!-- DT:Rich -->
<p>Use this component if you wish to update your system.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-users 2.14.1 3 i586
=Sum: YaST2 - User and Group Configuration
+Del:
<!-- DT:Rich -->
<p>This package is required for easy user creation in the YaST2 installation.
If it is not available, you will have to create user accounts manually with the 'useradd' command.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>This package is required for easy user creation in the YaST2 installation.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-vm 2.14.2 7 i586
=Sum: YaST2 Virtual Machine Installer
+Des:
<!-- DT:Rich -->
<p>This yast module configures and installs a virtual machine.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-xml 2.14.0 3 i586
=Sum: YaST2 - XML Agent
+Des:
<!-- DT:Rich -->
<p>The YaST2 XML agent
</p>
-Des:
##----------------------------------------
=Pkg: yelp 2.16.1 30 i586
=Sum: The GNOME 2.x Desktop Help Browser
+Des:
<!-- DT:Rich -->
<p>"Yelp" is the help browser for the GNOME 2.x Desktop. It features man, info, and docbook document sources.
</p>
-Des:
##----------------------------------------
=Pkg: yp-tools 2.9 34 i586
=Sum: Network Information Service (YP) client utilities
+Des:
<!-- DT:Rich -->
<p>This packages contains some useful tools for accessing NIS maps or to
test NIS configurations.
</p>
-Des:
##----------------------------------------
=Pkg: ypbind 1.20.2 33 i586
=Sum: NIS client daemon
+Des:
<!-- DT:Rich -->
<p>This package provides the ypbind daemon. The ypbind daemon binds NIS
clients to an NIS domain and searches a new NIS server if the old one
goes down.
</p><p>
</p><p>
Ypbind must be running on any machines which are running NIS client programs.
</p>
-Des:
##----------------------------------------
=Pkg: ypserv 2.19 33 i586
=Sum: YP - (NIS)-Server
+Des:
<!-- DT:Rich -->
<p>Configure your Linux PC as a YP server (NIS) using this package.
</p>
-Des:
##----------------------------------------
=Pkg: yudit 2.7.8 42 i586
=Sum: Unicode text editor
+Des:
<!-- DT:Rich -->
<p>yudit is a unicode package to edit and convert text of different languages.
</p>
-Des:
##----------------------------------------
=Pkg: yum 3.0.1 9 i586
=Sum: RPM installer/updater
+Des:
<!-- DT:Rich -->
<p>Yum is a utility that can check for and automatically download and install updated RPM packages. Dependencies are obtained and downloaded automatically prompting the user as necessary.
<p>This package contains the kernel modules of the Zapata Telephony Interface.
For details see the zaptel package.
</p>
-Des:
##----------------------------------------
=Pkg: zen-updater 7.1.100 39 i586
=Sum: Novell ZENworks Linux Management daemon
+Des:
<!-- DT:Rich -->
<p>The ZENworks updater is a small GUI tool to update system software
using the ZENworks daemon. A command-line tool is also available, see
the "rug" package.
</p>
-Des:
##----------------------------------------
=Pkg: zenity 2.16.1 24 i586
=Sum: GNOME Command Line Dialog Utility
+Des:
<!-- DT:Rich -->
<p>Zenity is a basic rewrite of gdialog, without the pain involved
of trying to figure out commandline parsing. Zenity is
zen-like; simple and easy to use.
</p><p>
Zenity Dialogs: Calendar, Text Entry, Error, Informational,
File Selection, List, Progress, Question, Text Information,
and Warning.
</p><p>
Zenity is especially useful in scripts.
</p>
-Des:
##----------------------------------------
=Pkg: zip 2.31 33 i586
=Sum: File compression program
+Des:
<!-- DT:Rich -->
<p>Zip is a compression and file packaging utility. It is compatible
with PKZIP(tm) 2.04g (Phil Katz ZIP) for MS-DOS systems.
</p>
-Des:
##----------------------------------------
=Pkg: ziptool 1.4.0 142 i586
=Sum: Tool for the Iomega ZIP and JAZ drives
+Des:
<!-- DT:Rich -->
<p>A tool for configuration of the Iomega ZIP and JAZ drives.
Automatic eject and write protection (password too) can be
configured.
</p>
-Des:
##----------------------------------------
=Pkg: zisofs-tools 1.0.6 33 i586
=Sum: User tools for zisofs
+Des:
<!-- DT:Rich -->
<p>Zisofs-tools, in conjunction with a zisofs-enabled system, allows the creation of an iso9660 filesystem that can be decompressed "live" on a file-by-file basis, while still being readable by systems without zisofs support. This package contains the tools necessary to create such a filesystem and read compressed files on a system without zisofs support.
<p>Build quality color workflows with Adobe ICC profiles.
</p><p>
Adobe wants to enable consistent, high-quality color workflows. For color workflows to succeed, color information must be shared by many people, from original creator to final publisher.
</p><p>
Enclosed in our compressed archive are:
</p><p>
4 RGB profiles
</p><p>
Adobe RGB (1998)
Apple RGB
ColorMatch RGB
sRGB IEC61966-2.1
</p><p>
10 CMYK profiles
</p><p>
US Web Coated (SWOP) v2
US Web Uncoated v2
US Sheetfed Coated v2
US Sheetfed Uncoated v2
Europe ISO Coated FOGRA27
Euroscale Uncoated v2
Japan Web Coated (Ad)
Japan Color 2001 Coated
Japan Color 2001 Uncoated
Japan Color 2002 Newspaper
</p><p>
</p><p>
For more information on ICC profiles, visit the International Color Consortium website (http://www.color.org/).
</p><p>
For more information on ICC color management, see the technical guides on the Adobe website.
</p><p>
System requirements
Any system-level or application-level color management system that uses ICC color profiles.
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p></p><p>
ADOBE SYSTEMS INCORPORATED
</p><p>
COLOR PROFILE LICENSE AGREEMENT
</p><p>
NOTICE TO USER: PLEASE READ THIS CONTRACT CAREFULLY. BY USING ALL OR ANY
PORTION OF THE SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS
AGREEMENT. YOU AGREE THAT THIS AGREEMENT IS ENFORCEABLE LIKE ANY WRITTEN
NEGOTIATED AGREEMENT SIGNED BY YOU. IF YOU DO NOT AGREE WITH THE TERMS OF THIS
AGREEMENT, DO NOT USE THE SOFTWARE.
<ol>
<li>DEFINITIONS. In this Agreement, "Adobe" means Adobe Systems Incorporated, a
Delaware corporation, located at 345 Park Avenue, San Jose, California 95110.
"Software" means the software and related items with which this Agreement is
provided.
</li><li>LICENSE. Subject to the terms of this Agreement, Adobe hereby grants you the
worldwide, nonexclusive, nontransferable, royalty-free license to use,
reproduce, and publicly display the Software. Adobe also grants you the rights
to distribute the Software only (a) as embedded within digital image files and
(b) on a standalone basis. No other distribution of the Software is allowed,
including, without limitation, distribution of the Software when incorporated
into or bundled with any application software. All individual profiles must be
referenced by their ICC Profile description string. You may not modify the
Software. Adobe is under no obligation to provide any support under this
Agreement, including upgrades or future versions of the Software or other
items. No title to the intellectual property in the Software is transferred to
you under the terms of this Agreement. You do not acquire any rights to the
Software except as expressly set forth in this Agreement.
</li><li>DISTRIBUTION. If you choose to distribute the Software, you do so with the
understanding that you agree to defend, indemnify, and hold harmless Adobe
against any losses, damages, or costs arising from any claims, lawsuits, or
other legal actions arising out of such distribution, including without
limitation, your failure to comply with this Section 3. If you distribute the
Software on a standalone basis, you will do so under the terms of this
Agreement or your own license agreement which (a) complies with the terms and
conditions of this Agreement; (b)effectively disclaims all warranties and
conditions, express or implied, on behalf of Adobe; (c)effectively excludes all
liability for damages on behalf of Adobe; (d) substantially states that any
provisions that differ from this Agreement are offered by you alone and not
Adobe; and (e) substantially states that the Software is available from you or
Adobe and informs licensees how to obtain it in a reasonable manner on or
through a medium customarily used for software exchange. Any distributed
Software will include the Adobe copyright notices as included in the Software
provided to you by Adobe.
</li><li>DISCLAIMER OF WARRANTY. Adobe licenses the Software to you on an "AS IS"
basis. Adobe makes no representation as to the adequacy of the Software for any
particular purpose or to produce any particular result. Adobe shall not be
liable for loss or damage arising out of this Agreement or from the
distribution or use of the Software or any other materials. ADOBE AND ITS
SUPPLIERS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN
BY USING THE SOFTWARE, EXCEPT FOR ANY WARRANTY,CONDITION, REPRESENTATION, OR
TERM TO THE EXTENT TO WHICH THE SAME CANNOT OR MAY NOT BE EXCLUDED OR LIMITED
BY LAW APPLICABLE TO YOU IN YOUR JURISDICTION. ADOBE AND ITS SUPPLIERS MAKE NO
WARRANTIES, CONDITIONS, REPRESENTATIONS, OR TERMS, EXPRESS OR IMPLIED, WHETHER
BY STATUTE, COMMON LAW, CUSTOM, USAGE, OR OTHERWISE AS TO ANY OTHER MATTERS,
INCLUDING BUT NOT LIMITED TO NONINFRINGEMENT OF THIRD-PARTY RIGHTS,
INTEGRATION, SATISFACTORY QUALITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. YOU
MAY HAVE ADDITIONAL RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. The
provisions of Sections 4 and 5 shall survive the termination of this Agreement,
howsoever caused, but this shall not imply or create any continued right to use
the Software after termination of this Agreement.
</li><li>LIMITATION OF LIABILITY. IN NO EVENT WILL ADOBE OR ITS SUPPLIERS BE LIABLE
TO YOU FOR ANY DAMAGES, CLAIMS, OR COSTS WHATSOEVER OR ANY CONSEQUENTIAL,
INDIRECT, INCIDENTAL DAMAGES, OR ANY LOST PROFITS OR LOST SAVINGS, EVEN IF AN
ADOBE REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, DAMAGES,
CLAIMS, OR COSTS OR FOR ANY CLAIM BY ANY THIRD PARTY. THE FOREGOING LIMITATIONS
AND EXCLUSIONS APPLY TO THE EXTENT PERMITTED BY APPLICABLE LAW IN YOUR
JURISDICTION. ADOBE'S AGGREGATE LIABILITY AND THAT OF ITS SUPPLIERS UNDER OR IN
CONNECTION WITH THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT PAID FOR THE
SOFTWARE. Nothing contained in this Agreement limits Adobe's liability to you
in the event of death or personal injury resulting from Adobe's negligence or
for the tort of deceit (fraud). Adobe is acting on behalf of its suppliers for
the purpose of disclaiming, excluding, and/or limiting obligations, warranties,
and liability as provided in this Agreement, but in no other respects and for
no other purpose.
</li><li>TRADEMARKS. Adobe grants you a worldwide, nonexclusive, nontransferable,
personal right to use the "Adobe" word trademark (the "Trademark") solely to
identify Adobe as the source of the Adobe RGB (1998) product or Adobe RGB
technology, so long as such use complies with the terms of this Agreement, the
trademark guidelines available at the "Permissions and trademarks" pages of the
Adobe website (www.adobe.com), and the "Adobe Trademark Guidelines for third
parties who license, use or refer to Adobe trademarks," also available from the
Adobe website. You acknowledge the validity of the Trademark and Adobe's
ownership of the Trademark. Nothing in this Agreement shall give you any right,
title, or interest in the Trademark, other than the license rights granted in
this Agreement. You recognize the value of the goodwill associated with the
Trademark and acknowledge that such goodwill exclusively inures to the benefit
of and belongs to Adobe. Adobe and the Adobe logo are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United States
and/or other countries. With the exception of referential use and the rights
granted in this Agreement, you will not use such trademarks or any other Adobe
trademark or logo without separate prior written permission granted by Adobe.
</li><li>TERM. This Agreement is effective until terminated. Adobe has the right to
terminate this Agreement immediately if you fail to comply with any term
hereof. Upon any such termination, you must return to Adobe all full and
partial copies of the Software in your possession or control.
</li><li>GOVERNMENT REGULATIONS. If any part of the Software is identified as an
export-controlled item under the United States Export Administration Act or any
other export law, restriction, or regulation (the "Export Laws"), you represent
and warrant that you are not a citizen, or otherwise located within, an
embargoed nation (including without limitation Iran, Iraq, Syria, Sudan, Libya,
Cuba, North Korea, and Serbia) and that you are not otherwise prohibited under
the Export Laws from receiving the Software. All rights to use the Software are
granted on condition that such rights are forfeited if you fail to comply with
the terms of this Agreement.
</li><li>GOVERNING LAW. This Agreement will be governed by and construed in
accordance with the substantive laws in force in the State of California as
such laws are applied to agreements entered into and to be performed entirely
within California between California residents. This Agreement will not be
governed by the conflict of law rules of any jurisdiction or the United Nations
Convention on Contracts for the International Sale of Goods, the application of
which is expressly excluded. All disputes arising out of, under, or related to
this Agreement will be brought exclusively in the state Santa Clara County,
California, USA.
</li><li>GENERAL. You may not assign your rights or obligations granted under this
Agreement without the prior written consent of Adobe. None of the provisions of
this Agreement shall be deemed to have been waived by any act or acquiescence
on the part of Adobe, its agents, or employees, but only by an instrument in
writing signed by an authorized signatory of Adobe. When conflicting language
exists between this Agreement and any other agreement included in the Software,
the terms of such included agreement shall apply. If either you or Adobe
employs attorneys to enforce any rights arising out of or relating to this
Agreement, the prevailing party shall be entitled to recover reasonable
attorneys' fees. You acknowledge that you have read this Agreement, understand
it, and that it is the complete and exclusive statement of your agreement with
Adobe which supersedes any prior agreement, oral or written, between Adobe and
you with respect to the licensing to you of the Software. No variation of the
terms of this Agreement will be enforceable against Adobe unless Adobe gives
its express consent, in writing, signed by an authorized signatory of Adobe.
These fonts contain the characters from the JIS X 0121-1990 character
set (additional, rarely used Japanese characters).
The fonts can be used with Ghostscript as well as with X11.
</p>
-Des:
##----------------------------------------
=Pkg: Crystalcursors 0.5 62 noarch
=Sum: Mouse Cursors in Crystal Icon Style
+Des:
<!-- DT:Rich -->
<p>Four different mouse cursor icon sets in the KDE CrystalSVG style.
In white, gray, blue, and green versions.
They can be selected from KDE Control Center, in the mouse configuration.
</p>
-Des:
##----------------------------------------
=Pkg: FreeNX 0.5.0 25 noarch
=Sum: FreeNX Application and Thin Client Server
+Des:
<!-- DT:Rich -->
<p>FreeNX application and thin client server based on NX technology NoMachine.
NX is the next-generation X compression and roundtrip suppression
scheme. It can operate remote X11 sessions over 56k modem dial-up links
or anything better. This package contains a free (GPL) implementation
of the nxserver component.
</p>
-Des:
##----------------------------------------
=Pkg: IPAGothic 001.000 48 noarch
=Sum: "Gothic" Japanese TrueType font made by IPA
+Des:
<!-- DT:Rich -->
<p>"Gothic" Japanese TrueType font made by IPA
(Information-technology Promotion Agency).
</p>
-Des:
##----------------------------------------
=Pkg: IPAMincho 001.000 48 noarch
=Sum: "Mincho" Japanese TrueType font made by IPA
+Des:
<!-- DT:Rich -->
<p>"Mincho" Japanese TrueType font made by IPA
(Information-technology Promotion Agency).
</p>
-Des:
##----------------------------------------
=Pkg: IPAPGothic 5.0.3 36 noarch
=Sum: "Proportional Gothic" Japanese TrueType font made by IPA
+Des:
<!-- DT:Rich -->
<p>"Proportional Gothic" Japanese TrueType font made by IPA
(Information-technology Promotion Agency).
</p>
-Des:
##----------------------------------------
=Pkg: IPAPMincho 001.000 48 noarch
=Sum: "Proportional Mincho" Japanese TrueType font made by IPA
+Des:
<!-- DT:Rich -->
<p>"Proportional Mincho" Japanese TrueType font made by IPA
(Information-technology Promotion Agency).
</p>
-Des:
##----------------------------------------
=Pkg: IPAUIGothic 001.000 48 noarch
=Sum: "UI Gothic" Japanese TrueType font made by IPA
+Des:
<!-- DT:Rich -->
<p>"UI Gothic" Japanese TrueType font made by IPA
(Information-technology Promotion Agency).
</p>
-Des:
##----------------------------------------
=Pkg: KhmerOS-fonts 3.1 33 noarch
=Sum: Fonts for the Khmer language of Cambodia
+Des:
<!-- DT:Rich -->
<p>Fonts for the Khmer language of Cambodia
</p>
-Des:
##----------------------------------------
=Pkg: Mule-UCS 0.84.20040212 90 noarch
=Sum: Unicode Extensions for Multilingually Enhanced Emacs
+Des:
<!-- DT:Rich -->
<p>This package offers Unicode encoding for Emacs.
Unlike the alternative package emacs-oc-unicode,
this one uses legacy Mule fonts to display Unicode text.
Therefore it is very well tested and usable.
</p>
-Des:
##----------------------------------------
=Pkg: SuSEfirewall2 3.5_SVNr159 4 noarch
=Sum: Stateful Packet Filter Using iptables and netfilter
+Des:
<!-- DT:Rich -->
<p>SuSEfirewall2 implements a packet filter to allow system administrators to protect their computer and network by restricting the possibility of other hosts connecting to them. This potentially saves you from suffering under the design flaws and vulnerabilities that are found in various daemons.
</p><p>
SuSEfirewall2 uses the iptables and netfilter packet filtering infrastructure, which allows a flexible rule setup and the creation of a stateful firewall, because it keeps track of connections and has the notion of related connections.
</p><p>
For simply protecting a single host from attacks, you can set SuSEfirewall2
in QUICK mode or use the personal-firewall configuration file. Note that
SuSEfirewall2 now includes the personal-firewall functionality.
</p>
-Des:
##----------------------------------------
=Pkg: WindowMaker-themes 0.1 271 noarch
=Sum: Themes for Window Maker
+Des:
<!-- DT:Rich -->
<p>This packages contains themes for the Window Maker window
manager. Documentation:
</p><p>
/usr/share/doc/packages/wmthemes
</p>
-Des:
##----------------------------------------
=Pkg: a2ps-h 20010113 553 noarch
=Sum: a2ps Support for Korean PostScript Filter (Python Version)
+Des:
<!-- DT:Rich -->
<p>a2ps support for Korean PostScript filter (Python version).
</p>
-Des:
##----------------------------------------
=Pkg: aelfred 1.2 34 noarch
=Sum: Java-based XML parser
+Des:
<!-- DT:Rich -->
<p>AElfred is a Java-based XML parser from Microstar Software Ltd.
AElfred is distributed for free (with full source)
for both commercial and non-commercial use.
</p>
-Des:
##----------------------------------------
=Pkg: aelfred-javadoc 1.2 34 noarch
=Sum: Java-based XML parser (documentation)
+Des:
<!-- DT:Rich -->
<p>Javadoc for aelfred.
</p>
-Des:
##----------------------------------------
=Pkg: agfa-fonts 2003.03.19 51 noarch
=Sum: Professional TrueType Fonts
+Des:
<!-- DT:Rich -->
<p>Professional TrueType Fonts
Professional TrueType Fonts<ul>
<li>Albany
</li><li>Cumberland
</li><li>Thorndale
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: alsa-firmware 1.0.13 17 noarch
=Sum: Firmware Data Files for ALSA
+Des:
<!-- DT:Rich -->
<p>Various firmware data files for ALSA drivers.
</p>
-Des:
##----------------------------------------
=Pkg: ant 1.6.5 41 noarch
=Sum: A Java-Based Build Tool
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool. In theory, it is kind of like Make, but without Make's wrinkles.
</p><p>
Why another build tool when there is already make, gnumake, nmake, jam, and
others? Because all those tools have limitations that Ant's original author
could not live with when developing software across multiple platforms.
Make-like tools are inherently shell-based--they evaluate a set of
dependencies then execute commands, not unlike what you would issue in a shell.
This means that you can easily extend these tools by using or writing any
program for the OS that you are working on. However, this also means that you
limit yourself to the OS, or at least the OS type, such as Unix, that you are
working on.
</p><p>
Makefiles are inherently evil as well. Anybody who has worked on them for any
time has run into the dreaded tab problem. "Is my command not executing because
I have a space in front of my tab???" said the original author of Ant way too
many times. Tools like Jam took care of this to a great degree, but still have
yet another format to use and remember.
</p><p>
Ant is different. Instead of a model where it is extended with shell-based
commands, Ant is extended using Java classes. Instead of writing shell
commands, the configuration files are XML-based, calling out a target tree
where various tasks are executed. Each task is run by an object that implements
a particular task interface.
</p><p>
Granted, this removes some of the expressive power that is inherent by being
able to construct a shell command such as `find . -name foo -exec rm {}`, but
it gives you the ability to be cross-platform--to work anywhere and
everywhere. If you really need to execute a shell command, Ant has an
<exec> task that allows different commands to be executed based on the OS used.
</p>
-Des:
##----------------------------------------
=Pkg: apel 10.6 89 noarch
=Sum: A Portable Emacs Library
##----------------------------------------
=Pkg: apel-xemacs 10.6 247 noarch
=Sum: A Portable Emacs Library
+Des:
<!-- DT:Rich -->
<p>APEL stands for "A Portable Emacs Library".
</p>
-Des:
##----------------------------------------
=Pkg: apparmor-docs 2.0.1 6 noarch
=Sum: AppArmor Documentation package
+Des:
<!-- DT:Rich -->
<p>This package contains documentation for AppArmor.
</p><p>
This package is part of a suite of tools that used to be named SubDomain.
</p>
-Des:
##----------------------------------------
=Pkg: apparmor-profiles 2.0.1 14 noarch
=Sum: AppArmor profiles that are loaded into the apparmor kernel module
+Des:
<!-- DT:Rich -->
<p>Base profiles. AppArmor is a file and network mandatory access
control mechanism. AppArmor confines processes to the resources allowed
by the systems administrator and can constrain the scope of potential
security vulnerabilities.
</p><p>
This package is part of a suite of tools that used to be named SubDomain.
</p>
-Des:
##----------------------------------------
=Pkg: apparmor-utils 2.0.1 8 noarch
=Sum: AppArmor User-Level Utilities Useful for Creating AppArmor Profiles
+Des:
<!-- DT:Rich -->
<p>This package provides the aa-logprof, aa-genprof, aa-autodep, aa-enforce, and aa-complain tools to assist with profile authoring. This package also provides the aa-unconfined server information tool and the aa-eventd event reporting system.
</p><p>
This package is part of a suite of tools that used to be named SubDomain.
</p>
-Des:
##----------------------------------------
=Pkg: appdefko 3.3.5 595 noarch
=Sum: Collection of Korean X Window System Application Default Files
+Des:
<!-- DT:Rich -->
<p>A collection of Korean X Window System application default files.
</p>
-Des:
##----------------------------------------
=Pkg: asm 1.5.3 36 noarch
=Sum: Java bytecode manipulation framework
+Des:
<!-- DT:Rich -->
<p>ASM is a Java bytecode manipulation framework.
</p><p>
It can be used to dynamically generate stub classes or other proxy classes, directly in binary form, or to dynamically modify classes at load time, i.e., just before they are loaded into the Java Virtual Machine.
</p><p>
ASM offers similar functionalities as BCEL or SERP, but is much smaller.
</p>
-Des:
##----------------------------------------
=Pkg: atmel-firmware 1.3 34 noarch
=Sum: Firmware for Atmel at76c50x Wireless Network Chips
+Des:
<!-- DT:Rich -->
<p>The drivers for Atmel at76c50x wireless network chips in the
Linux 2.6.x kernel and at http://at76c503a.berlios.de/ do not
include the firmware and this firmware needs to be loaded by
the host on most cards using these chips.
This package provides the firmware images that
should be automatically loaded as needed by the hotplug system. It also
provides a small loader utility that can be used to accomplish the
same thing when hotplug is not in use.
</p>
-Des:
##----------------------------------------
=Pkg: autoyast2 2.14.15 9 noarch
=Sum: YaST2 Automated Installation
+Des:
<!-- DT:Rich -->
<p>This package is intended for management of the control files and the AutoYaST2 configurations. This system should only be used by experienced system administrators.
Warning:
AutoYaST2 performs the installation without any user intervention, warnings, or confirmations (unless specified otherwise in the control file).
</p><p>
This file contains YaST2-independent files needed to create installation sources.
</p>
-Des:
##----------------------------------------
=Pkg: autoyast2-installation 2.14.15 9 noarch
=Sum: YaST2 - Auto Installation Modules
+Des:
<!-- DT:Rich -->
<p>This package performs auto-installation relying on a control file generated with the autoyast2 package.
</p>
-Des:
##----------------------------------------
=Pkg: baekmuk 2.1 459 noarch
=Sum: Baekmuk Fonts (Korean Fonts for the X Window System, Bitmap Version)
+Des:
<!-- DT:Rich -->
<p>Baekmuk Fonts (Korean fonts for the X Window System, bitmap version).
</p>
-Des:
##----------------------------------------
=Pkg: bitstream-vera 1.10 199 noarch
=Sum: Bitstream Vera(tm) Truetype fonts
+Des:
<!-- DT:Rich -->
<p>The package contains the "Vera" truetype fonts from Bitstream Inc.
</p>
-Des:
##----------------------------------------
=Pkg: boo 0.7.6.2237 30 noarch
=Sum: A CLI Scripting Language
+Des:
<!-- DT:Rich -->
<p>Boo is a new object-oriented statically-typed programming language for the common language infrastructure with a Python-inspired syntax and a special focus on language and compiler extensibility.
</p>
-Des:
##----------------------------------------
=Pkg: bsf 2.3.0 45 noarch
=Sum: Bean Scripting Framework
+Des:
<!-- DT:Rich -->
<p>Bean Scripting Framework (BSF) is a set of Java classes that provides
scripting language support within Java applications and access to Java
objects and methods from scripting languages. BSF allows writing
JSPs in languages other than Java while providing access to the Java
class library. In addition, BSF permits any Java application to be
implemented in part (or dynamically extended) by a language that is
embedded within it. This is achieved by providing an API that permits
calling scripting language engines from within Java as well as an
object registry that exposes Java objects to these scripting language
engines.
</p><p>
This BSF package currently supports several scripting languages:<ul>
<li>Javascript (using Rhino ECMAScript, from the Mozilla project)
</li><li>XSLT Stylesheets (as a component of Apache XML project's Xalan and
Xerces)
</li></ul>
In addition, the following languages are supported with their own BSF
engines:<ul>
<li>Java (using BeanShell, from the BeanShell project)
</li><li>JRuby
</li><li>JudoScript
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: bsh2 2.0 38 noarch
=Sum: Lightweight Scripting for Java (BeanShell Version 2.x)
+Des:
<!-- DT:Rich -->
<p>BeanShell is a small, free, embeddable, Java source interpreter with object scripting language features, written in Java.
BeanShell executes standard Java statements and expressions, in addition to obvious scripting commands and syntax.
BeanShell supports scripted objects as simple method closures like those in Perl and JavaScript(tm).
You can use BeanShell interactively for Java experimentation and debugging or as a simple scripting engine for your applications.
In short: BeanShell is a dynamically interpreted Java, plus some useful stuff.
Another way to describe it is to say that in many ways BeanShell is to Java as Tcl/Tk is to C: BeanShell is embeddable - You can call BeanShell from your Java applications to execute Java code dynamically at run-time or to provide scripting extensibility for your applications.
Alternatively, you can call your Java applications and objects from BeanShell;
working with Java objects and APIs dynamically.
Since BeanShell is written in Java and runs in the same space as your application, you can freely pass references to "real live" objects into scripts and return them as results.
</p><p>
With version 2.0 BeanShell becomes a fully Java compatible scripting language.
BeanShell is now capable of interpreting ordinary Java source and loading .java source files from the class path.
BeanShell scripted classes are fully typed and appear to outside Java code and
via reflective inspection as ordinary classes.
However their implementation is fully dynamic and they may include arbitrary BeanShell scripts in their bodies, methods, and constructors.
Users may now freely mix loose, unstructured BeanShell scripts, method closures, and full scripted classes.
</p>
-Des:
##----------------------------------------
=Pkg: bsh2-bsf 2.0 38 noarch
=Sum: Lightweight Scripting for Java (BeanShell Version 2.x) (BSF support)
+Des:
<!-- DT:Rich -->
<p>BSF support for bsh2.
</p>
-Des:
##----------------------------------------
=Pkg: bsh2-classgen 2.0 38 noarch
=Sum: Lightweight Scripting for Java (BeanShell Version 2.x) (ASM support)
+Des:
<!-- DT:Rich -->
<p>ASM support for bsh2.
</p>
-Des:
##----------------------------------------
=Pkg: bsh2-demo 2.0 38 noarch
=Sum: Lightweight Scripting for Java (BeanShell Version 2.x) (demo and samples)
+Des:
<!-- DT:Rich -->
<p>Demonstrations and samples for bsh2.
</p>
-Des:
##----------------------------------------
=Pkg: bsh2-javadoc 2.0 38 noarch
=Sum: Lightweight Scripting for Java (BeanShell Version 2.x) (Java Documentation)
+Des:
<!-- DT:Rich -->
<p>Javadoc for bsh2.
</p>
-Des:
##----------------------------------------
=Pkg: bsh2-manual 2.0 38 noarch
=Sum: Lightweight Scripting for Java (BeanShell Version 2.x) (Manual)
+Des:
<!-- DT:Rich -->
<p>Documentation for bsh2.
</p>
-Des:
##----------------------------------------
=Pkg: build 2006.11.24 3 noarch
=Sum: A Script to Build SUSE Linux RPMs
+Des:
<!-- DT:Rich -->
<p>This package provides a script for building
RPMs for SUSE Linux in a chroot environment.
</p>
-Des:
##----------------------------------------
=Pkg: bwidget 1.7.0 78 noarch
=Sum: A Set of Megawidgets for Tcl/Tk
+Des:
<!-- DT:Rich -->
<p>Add useful and nice-looking widgets to your interfaces with the BWidget Toolkit,
a set of native Tk 8.x Widgets using Tcl8.x namespaces.
The BWidgets have a professional look and feel as in other well-known toolkits
(Tix or Incr Widget). However, the concept is radically different because
everything is native. There is no platform compilation and no compiled extension
libraries are needed. The code is in pure Tcl/Tk.
</p>
-Des:
##----------------------------------------
=Pkg: cecilia 2.0.5 156 noarch
=Sum: Tcl/Tk Front-End for Csound
+Des:
<!-- DT:Rich -->
<p>Cecilia is a Tcl/Tk front-end for the Csound sound synthesis program.
</p>
-Des:
##----------------------------------------
=Pkg: cedilla 0.6 23 noarch
=Sum: A Best-Effort Text Printer (Works in UTF-8 and Can Replace a2ps)
+Des:
<!-- DT:Rich -->
<p>Cedilla is a "best-effort" text printer that uses Unicode internally.
</p><p>
</p><p>
Using Unicode means that the set of characters that can appear in the input
is very large and the user may very well have no font available that
contains glyphs for the characters that the user wants to print. Cedilla attempts
to at least partially solve this problem using a number of techniques:
</p><p>
<ol>
<li>Cedilla can use an arbitrary number of downloadable fonts. For any given
print job, only the necessary fonts are downloaded.
</li></ol>
<ol>
<li>Cedilla uses its own built-in font, which contains a number of
useful glyphs that are missing from standard fonts.
</li></ol>
<ol>
<li>Cedilla modifies existing glyphs in order to, for example, remove dots or
add bars.
</li></ol>
<ol>
<li>Cedilla attempts to build composite glyphs (for accented
characters, for example) on the fly.
</li></ol>
<ol>
<li>Cedilla uses fallbacks for characters that are not supported by the
available fonts.
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: cm-unicode 0.4.2 34 noarch
=Sum: Unicode Version of the Computer Modern Fonts
+Des:
<!-- DT:Rich -->
<p>Computer Modern Unicode fonts were converted from metafont sources
using [1] textrace and [2] pfaedit (030404). Their main purpose is to
create free good quality fonts for use in X Window System applications supporting
many languages. Currently the fonts contain glyphs from Latin1
(Metafont ec, tc), Cyrillic (la, rx) and Greek (cbgreek when
available) code sets.
</p>
-Des:
##----------------------------------------
=Pkg: convmv 1.10 20 noarch
=Sum: Converts File Names from One Encoding to Another
+Des:
<!-- DT:Rich -->
<p>convmv is meant to help convert a directory tree and the contained
files or a whole file system into a different encoding. It just
converts the file names, not the content of the files. A special
feature of convmv is that it also takes care of symlinks and
converts the symlink target pointer in case the symlink target is
converted.
</p><p>
All this comes in very handy when converting from old
8-bit locales to UTF-8 locales. It is also possible to convert
directories to UTF-8 that are already partly UTF-8 encoded. convmv is
able to detect if certain files are UTF-8 encoded and skips them
by default. To turn this behavior off, use the --nosmart switch.
</p><p>
An interoperability issue that comes with UTF-8 locales is this: Linux
and (most?) other Unix-like operating systems use the
normalization form C (NFC) for UTF-8 encoding by default but do
not enforce this. Darwin, the base of Macintosh OSX, enforces
normalization form D (NFD), where a few characters are encoded in a
different way. convmv is able to convert files to NFC or NFD, which
aids in interoperability with such systems.
</p>
-Des:
##----------------------------------------
=Pkg: dejavu 2.10 16 noarch
=Sum: DejaVu Truetype Fonts
+Des:
<!-- DT:Rich -->
<p>The DejaVu fonts are a font family based on the Bitstream Vera Fonts.
Its purpose is to provide a wider range of characters while maintaining the
original look and feel through the process of collaborative development.
</p>
-Des:
##----------------------------------------
=Pkg: desktop-data-SuSE 10.2 20 noarch
=Sum: SUSE Theme Files for KDE and GNOME
+Des:
<!-- DT:Rich -->
<p>This package contains the SUSE menu structure files for KDE and GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: desktop-translations 10.1 66 noarch
=Sum: Desktop Files Translation updates
+Des:
<!-- DT:Rich -->
<p>This package provides further translations for installed desktop files.
</p>
-Des:
##----------------------------------------
=Pkg: diffmk 1.0 33 noarch
=Sum: Compute Differences between XML Documents
+Des:
<!-- DT:Rich -->
<p>Using DiffMk, you can build an automated comparison of two XML documents. The output format for viewing is HTML.
</p>
-Des:
##----------------------------------------
=Pkg: ding 1.4 34 noarch
=Sum: An X Window System Dictionary Tool
+Des:
<!-- DT:Rich -->
<p>Ding is a smart X Window System English-to-German dictionary. It works with a local
database file. For full functionality, agrep should be installed.
</p>
-Des:
##----------------------------------------
=Pkg: docbook-dsssl-stylesheets 1.79 37 noarch
=Sum: DSSSL Stylesheets for the DocBook DTD
+Des:
<!-- DT:Rich -->
<p>You can use these DSSSL stylesheets to convert DocBook documents
into other formats. "Print" (TeX and RTF) and "online" (HTML) output formats are available.
</p><p>
</p><p>
The stylesheets are customizable and, within limits, it is possible to
adapt them for your own needs. Numerous native languages are
supported.
</p>
-Des:
##----------------------------------------
=Pkg: docbook-toys 1.51.0 299 noarch
=Sum: DocBook Tools
+Des:
<!-- DT:Rich -->
<p>A shell script to convert SGML documents based on the DocBook DTD.
</p><p>
For usage information read:
</p><p>
/usr/share/doc/packages/docbook-toys/README
</p>
-Des:
##----------------------------------------
=Pkg: docbook-utils 0.6.14 99 noarch
=Sum: Small Wrapper Scripts for Processing DocBook Files
+Des:
<!-- DT:Rich -->
<p>The docbook-utils package is a set of a few small programs intended to ease
everyday use of technical documentation software based on the DocBook DTD, either written in SGML or XML.
</p><p>
Tasks they currently accomplish are:<ul>
<li>jw: convert SGML files to other formats (HTML, RTF, PostScript, PDF)
</li><li>sgmldiff: detect the differences in markup between two SGML files
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: docbook-xml-website 2.5.0 83 noarch
=Sum: Web Site, DTD, and Stylesheets
+Des:
<!-- DT:Rich -->
<p>A DTD in XML as an extention to DocBook XML and XSL stylesheets to
process it.
</p>
-Des:
##----------------------------------------
=Pkg: docbook-xsl-stylesheets 1.71.1 5 noarch
=Sum: XSL Stylesheets for the DocBook DTD (XML)
+Des:
<!-- DT:Rich -->
<p>These are XSL stylesheets for the DocBook XML (and "Simplified" DocBook
XML) DTDs.
</p><p>
</p><p>
XSL is a standard W3C stylesheet language for both print and online
rendering. For more information about XSL, see the XSL page at the W3C.
</p>
-Des:
##----------------------------------------
=Pkg: docbook_3 3.1 631 noarch
=Sum: DocBook DTD 3.x
+Ins:
<!-- DT:Rich -->
<p>For new projects, consider using version 4.x.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>This package contains version 3.0 and 3.1 and an XML
version. It is suitable for writing technical documentation.
</p><p>
</p><p>
The documentation can be found in /usr/share/doc/packages/docbook_3.
</p>
-Des:
##----------------------------------------
=Pkg: docbook_4 4.4 40 noarch
=Sum: DocBook DTD Version 4.x
+Des:
<!-- DT:Rich -->
<p>DocBook is used to produce technical documentation. This package has SGML and XML versions
included.
</p>
-Des:
##----------------------------------------
=Pkg: ec-fonts-mftraced 1.0.12 38 noarch
=Sum: Type1 PostScript Fonts for TeX with European Accents
+Des:
<!-- DT:Rich -->
<p>These are Type1 renderings of the EC variants of the standard CMR family.
</p>
-Des:
##----------------------------------------
=Pkg: edict 20060807 20 noarch
=Sum: The Japanese Dictionary Files for Jim Breen's EDICT Project
+Des:
<!-- DT:Rich -->
<p>The EDICT file is the outcome of a voluntary project to produce a
freely available Japanese-English Dictionary in machine readable
form. This project has been under way since early 1991, beginning with
the small original file included with the MOKE (Mark's Own Kanji
Editor) Japanese word processing package. It had reached a size of nearly
103,000 entries when it was split into two files: EDICT containing the
"normal" dictionary entries, and ENAMDICT containing names. Both files
are used by a number of software packages and thousands of users
worldwide. The EDICT file now has over 60,000 entries and the ENAMDICT
file has over 160,000 entries.
</p><p>
</p><p>
Meanwhile, there are also some additional dictionary files for
special purposes, COMPDIC, for example, for words from the computing
and communication field.
</p>
-Des:
##----------------------------------------
=Pkg: edict-emacs 0.9.8 753 noarch
=Sum: edict.el, an Emacs Front-End for EDICT
+Des:
<!-- DT:Rich -->
<p>The original edict.el was written by Per Hammarlund. It is an
interface to the EDICT Japanese-English dictionary compiled by Jim
Breen at Monash University. Using the region and a couple of
keystrokes, edict.el looks up the Japanese key and returns all the
EDICT entries containing that key in a pop-up buffer. English is
even easier: you just point anywhere in the word you want to look
up.
</p><p>
</p><p>
Bob Kerns added a morphology engine, which reduces a highly inflected
Japanese word to a list of dictionary forms (for example itta -> (iku, iu)),
all of which are looked up.
</p>
-Des:
##----------------------------------------
=Pkg: efont-serif-ttf 20010312 524 noarch
=Sum: Free and Open Scalable Electronic Font
+Des:
<!-- DT:Rich -->
<p>The efont-serif is a really free and open scalable electronic font.
</p><p>
</p><p>
The Omega Serif and URW Nimbus are also distributable. But their
letter forms are quite similar to Adobe Times. The efont-serif does not copy
the outlines or the letter forms of any copyrighted typefaces.
</p>
-Des:
##----------------------------------------
=Pkg: efont-unicode 0.4.2 44 noarch
=Sum: Unicode Font by /efont/
+Des:
<!-- DT:Rich -->
<p>Unicode fonts developed by /efont/ openlab.
This font package includes 12,14, 16, and 24 pixel ISO-10646 fonts.
</p>
-Des:
##----------------------------------------
=Pkg: engdic 0.2 20 noarch
=Sum: Little Korean <-> English Dictionary
+Des:
<!-- DT:Rich -->
<p>Little Korean <-> English dictionary.
</p>
-Des:
##----------------------------------------
=Pkg: flim 1.14.7 36 noarch
=Sum: An Emacs Library for MIME
+Des:
<!-- DT:Rich -->
<p>For coding and decoding MIME messages.
</p>
-Des:
##----------------------------------------
=Pkg: flim-xemacs 1.14.7 42 noarch
=Sum: Lisp Library for Basic Features Concerning Internet Messages
+Des:
<!-- DT:Rich -->
<p>FLIM is a library that provides basic features about message
representation or encoding.
</p>
-Des:
##----------------------------------------
=Pkg: fonts-arabic 0.20040113 40 noarch
=Sum: A Collection of Free Arabic Fonts
+Des:
<!-- DT:Rich -->
<p>A collection of free Arabic fonts available from
http://www.arabeyes.org/resources.php.
</p>
-Des:
##----------------------------------------
=Pkg: fonts-config 20061025 11 noarch
=Sum: Configures Fonts for X Windows and other applications
+Des:
<!-- DT:Rich -->
<p>Configures Fonts for X Windows and other applications.
</p><p>
Usually fonts-config is called automatically via SuSEconfig
(SuSEconfig --module fonts), which is usually automatically
called by YaST2. You can also execute fonts-config
directly, which is mainly useful for debugging it.
</p>
-Des:
##----------------------------------------
=Pkg: fop 0.20.5 105 noarch
=Sum: Formatter for Printing XSLT Processed XML Files
+Des:
<!-- DT:Rich -->
<p>FOP (Formatting Objects Processor) is driven by XSL formatting objects (XSL-FO). It is a Java application that reads a formatting object (FO) tree and renders the resulting pages to one of the following output formats: PDF (primary output target), PCL, PS, SVG, XML (area tree representation), Print, AWT, MIF, and TXT.
</p>
-Des:
##----------------------------------------
=Pkg: free-ttf-fonts 1.0 195 noarch
=Sum: Free TrueType Art Fonts
+Des:
<!-- DT:Rich -->
<p>More than 300 free fonts in True Type format. Most of them are in the art style and unusable as desktop fonts, but are great for any poster or illustration.
</p><p>
The fonts are copyrighted under the GPL or a Freeware license, but donations are requested by
the artists. Look in /usr/share/doc/packages/free-ttf-fonts/ for further information.
</p>
-Des:
##----------------------------------------
=Pkg: freefont 0.20060718 28 noarch
=Sum: Free UCS Outline Fonts
+Des:
<!-- DT:Rich -->
<p>A set of free outline (OpenType, for example) fonts covering the ISO
10646/Unicode UCS (Universal Character Set). The set consists of three
typefaces: one monospaced and two proportional (one with uniform and
one with modulated stroke.
</p>
-Des:
##----------------------------------------
=Pkg: fvwm-themes 0.6.2 230 noarch
=Sum: FVWM Configuration Framework
+Des:
<!-- DT:Rich -->
<p>FVWM Themes is a powerful configuration framework for FVWM,
designed to be easily extendable and configurable. It includes
several prebuilt themes and a pack of images and sounds.
</p>
-Des:
##----------------------------------------
=Pkg: gecko-sharp 0.6 64 noarch
=Sum: C# Bindings for the Gecko Engine
+Des:
<!-- DT:Rich -->
<p>C# bindings for the Gecko engine (required for monodevelop).
</p>
-Des:
##----------------------------------------
=Pkg: gecko-sharp2 0.11 56 noarch
=Sum: Gecko bindings for Mono
+Des:
<!-- DT:Rich -->
<p>This package provides Mono bindings for the Gecko engine, through an easy-to-use widget that will allow you to embed a Mozilla browser window into your Gtk# application.
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-cjk 20050315 39 noarch
=Sum: Tools for Using CJK TrueType Fonts and CID-Keyed Fonts with Ghostscript
+Des:
<!-- DT:Rich -->
<p>CMaps, scripts, and other tools for using CJK TrueType fonts and
CID-keyed fonts with Ghostscript.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help 0.9 45 noarch
=Sum: Help System Data for GIMP2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help is a help system designed for use with the internal GIMP help
browser, external Web browsers and HTML renderers, and human eyes.
Docbook is used to create a highly customizable system for all needs.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-audio 2.0.0 152 noarch
=Sum: Audio Files for the GNOME Desktop
+Des:
<!-- DT:Rich -->
<p>Sounds for GNOME and Gtk applications.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-common 2.12.0 33 noarch
=Sum: Commonly Used Files for the GNOME 2.x Desktop Platform
+Des:
<!-- DT:Rich -->
<p>Gnome-common includes files used by most GNOME 2.x Desktop applications.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-icon-theme 2.16.0.1 12 noarch
=Sum: GNOME Icon Theme
+Des:
<!-- DT:Rich -->
<p>The default GNOME icon theme.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-mime-data 2.4.2 42 noarch
=Sum: MIME Type and Application Database for the GNOME 2.x Desktop
+Des:
<!-- DT:Rich -->
<p>This module contains the base MIME and application database for GNOME.
It is meant to be accessed through the MIME functions in GNOMEVFS.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-themes 2.16.1.1 21 noarch
=Sum: GNOME Themes
+Des:
<!-- DT:Rich -->
<p>GNOME themes, including Ximian Industrial and selected background images.
</p>
-Des:
##----------------------------------------
=Pkg: gnome2-SuSE 10.2 32 noarch
=Sum: Distribution Default Settings for the GNOME 2.x Desktop
+Des:
<!-- DT:Rich -->
<p>This package contains default settings for the GNOME 2.x Desktop that are
set when a new user logs in. The package includes preconfiguration in the form
of gconf schemas, background wallpapers, panel graphics, and other things.
A completely different set of default settings can be set for the root user.
</p>
-Des:
##----------------------------------------
=Pkg: gnome2-user-docs 2.16.1 24 noarch
=Sum: GNOME 2.x Desktop Documentation
+Des:
<!-- DT:Rich -->
<p>This package contains documents that are
targeted for GNOME end-users.
</p>
-Des:
##----------------------------------------
=Pkg: gnu-getopt 1.0.10 41 noarch
=Sum: Java getopt Implementation
+Des:
<!-- DT:Rich -->
<p>The GNU Java getopt classes support short and long argument parsing in
a manner 100% compatible with the version of GNU getopt in glibc 2.0.6
with a mostly compatible programmer's interface as well. Note that this
is a port, not a new implementation.
</p>
-Des:
##----------------------------------------
=Pkg: gnu-regexp 1.1.4 37 noarch
=Sum: Java NFA regular expression engine
+Des:
<!-- DT:Rich -->
<p>The gnu-regexp package is a pure-Java implementation of a traditional (non-POSIX) NFA regular expression engine.
Its syntax can emulate many popular development tools, including awk, sed, emacs, perl and grep.
For a relatively complete list of supported and non-supported syntax, refer to the syntax and usage notes.
</p>
-Des:
##----------------------------------------
=Pkg: gnu-regexp-demo 1.1.4 37 noarch
=Sum: Java NFA regular expression engine (demo and samples)
<p>This package contains additional themes and engines for the GTK2 library.
</p>
-Des:
##----------------------------------------
=Pkg: gtkdoc 1.7 20 noarch
=Sum: GTK+ DocBook Documentation Generator
+Des:
<!-- DT:Rich -->
<p>Gtkdoc is a set of Perl scripts that generate API reference documentation in
DocBook format. It can extract documentation from source code comments in a
manner similar to Java-doc. It is used to generate the documentation for
GLib, Gtk+, and GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview-sharp2 0.10 55 noarch
=Sum: GtkSourceView bindings for Mono
+Des:
<!-- DT:Rich -->
<p>This package provides Mono bindings for GtkSourceView, a child of the GTK+ text widget which implements syntax highlighting and other features typical of a source editor.
</p>
-Des:
##----------------------------------------
=Pkg: html-dtd 2004.1.26 96 noarch
=Sum: HTML DTDs (Document Type Definitions) and Documents
+Des:
<!-- DT:Rich -->
<p>Document Type Definitions (DTDs) for HTML 2.0, HTML 3.2, HTML 4.0, and
HTML 4.01. This package also contains the documentation (located in <tt>/usr/share/doc/packages/html-dtd</tt>).
</p>
-Des:
##----------------------------------------
=Pkg: icewm-themes 0.1 563 noarch
=Sum: Themes for the IceWM Window Manager
+Des:
<!-- DT:Rich -->
<p>This package contains a collection of themes for the popular IceWM window
manager. Most of them have been taken from the original 0.9.42 themes
package. Others have been taken from http://icewm.themes.org.
</p>
-Des:
##----------------------------------------
=Pkg: icon-naming-utils 0.8.1 19 noarch
=Sum: Icon Name Specification Mapping Script
+Des:
<!-- DT:Rich -->
<p>A script for creating a symlink mapping for deprecated icon names to the
new icon naming specification names for desktop icon themes.
</p>
-Des:
##----------------------------------------
=Pkg: ifntchia 1.2.1 234 noarch
=Sum: Chinese Fonts for the X Window System
+Des:
<!-- DT:Rich -->
<p>Chinese fonts for the X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: ifnteuro 1.2.1 234 noarch
=Sum: European fonts for the X Window System
+Des:
<!-- DT:Rich -->
<p>European fonts for the X Window System (ISO 8859-1, 8859-2, 8859-3, 8859-4, 8859-5/9, 8859-7, and 8859-8 together with KOI8-1/GOST19768.74-1).
</p>
-Des:
##----------------------------------------
=Pkg: ikvm 0.28.0.0 21 noarch
=Sum: A JVM Based on the Mono Runtime
+Des:
<!-- DT:Rich -->
<p>This package provides IKVM.NET, an open source Java compatibility layer for Mono, which includes a Virtual Machine, a bytecode compiler, and various class libraries for Java, as well as tools for Java and Mono interoperability.
</p>
-Des:
##----------------------------------------
=Pkg: indic-fonts 2005.06.15 35 noarch
=Sum: Professional Indian Language TrueType Fonts
+Des:
<!-- DT:Rich -->
<p>This package contains many professional Indian language TrueType fonts contributed by the community and some also donated by organizations to open source. All fonts are available under GPL.
</p>
-Des:
##----------------------------------------
=Pkg: info2html 2.0 22 noarch
=Sum: Program to Convert Info Pages into HTML Pages
+Des:
<!-- DT:Rich -->
<p>This package contains the CGI script info2html that creates
HTML pages from info documents.
</p><p>
</p><p>
Info2html opens a Web browser with an HTML page of the info file
/usr/share/info/dir.
</p><p>
Info references and nodes can be clicked to
generate HTML pages of the linked info files.
</p>
-Des:
##----------------------------------------
=Pkg: inst-source-utils 2006.11.21 2 noarch
=Sum: Utilities for creating customized installation sources.
+Des:
<!-- DT:Rich -->
<p>Utilities supporting autoinstallation and creation of customized installation and update sources.
</p>
-Des:
##----------------------------------------
=Pkg: intlfnts 1.2.1 234 noarch
=Sum: Documentation for the International Fonts
+Des:
<!-- DT:Rich -->
<p>This package contains the READMEs
for international fonts from the following packages:
</p><p>
</p><p>
ifntarab: Arab fonts for X11
</p><p>
ifntasia: Asian fonts for X11
</p><p>
ifntchia: Chinese fonts for X11
</p><p>
ifntchib: Big Chinese fonts for X11
</p><p>
ifntethi: Ethiopic fonts for X11
</p><p>
ifnteuro: European fonts for X11
</p><p>
ifntjapa: Japanese fonts for X11
</p><p>
ifntjapb: Big Japanese fonts for X11
</p><p>
ifntphon: IPA fonts for X11
</p><p>
intlfonts-ttf: TrueType fonts
</p><p>
intlfonts-bdf: Bitmap fonts useful for printing
exotic languages from Emacs
</p>
-Des:
##----------------------------------------
=Pkg: intlfonts-ttf 1.2.1 234 noarch
=Sum: TrueType Fonts from the GNU Intlfonts Package
+Des:
<!-- DT:Rich -->
<p>TrueType fonts from the GNU intlfonts package.
</p>
-Des:
##----------------------------------------
=Pkg: intltool 0.35.0 20 noarch
=Sum: Internationalization Tool Collection
+Des:
<!-- DT:Rich -->
<p>Some scripts to support translators working on GNOME and similar programs.
Data available in XML files (.oaf, .desktop, .sheet, and more) can be extracted
into PO files. After translation, the new information is written back
The package is covered by the Intel license. See http://ipw2100.sourceforge.net/firmware.php?fid=4.
</p>
-Des:
##----------------------------------------
=Pkg: irssi-extra 2006.1.25 35 noarch
=Sum: Scripts and Themes for the irssi IRC Client
+Des:
<!-- DT:Rich -->
<p>Perl scripts and theme files for the <a href="pkg://irssi">irssi</a> IRC client.
You can customize the look and feel and add extra functionality with this package.
</p>
-Des:
##----------------------------------------
=Pkg: iscan-firmware 2.0.0.1 14 noarch
=Sum: Firmware files for Epson scanners
+Ins:
<!-- DT:Rich -->
<p>This package contains proprietary software.
</p><p>
You must remove the package if you don't accept the license agreement provided in the EAPL and LICENSE files in /usr/share/doc/packages/iscan-firmware/
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>Firmware files are only needed for the following scanners:
</p><p>
esfw41.bin:
Perfection 2480 PHOTO / GT-F500,
Perfection 2580 PHOTO / GT-F550
</p><p>
esfw32.bin:
Perfection 3170 PHOTO / GT-9400UF
</p><p>
esfw52.bin:
Perfection 3490 PHOTO / GT-F520,
Perfection 3590 PHOTO / GT-F570
</p><p>
esfw43.bin:
Perfection 4180 PHOTO / GT-F600
</p><p>
esfw54.bin:
Perfection 4490 PHOTO / GT-X750
</p><p>
esfw66.bin:
Perfection V10 / GT-S600,
Perfection V100 PHOTO / GT-F650
</p><p>
esfw68.bin:
Perfection V350 PHOTO / GT-F700
</p><p>
For the license see the EAPL and LICENSE files in /usr/share/doc/packages/iscan-firmware/
</p>
-Des:
##----------------------------------------
=Pkg: iso-codes 0.49 38 noarch
=Sum: ISO Code Lists and Translations
+Des:
<!-- DT:Rich -->
<p>This package provides the ISO-639 language code list, the ISO-3166
territory code list, ISO-3166-2 subterritory lists, and all their
translations in gettext .po form.
</p>
-Des:
##----------------------------------------
=Pkg: iso-codes-devel 0.49 38 noarch
=Sum: ISO code lists and translations
+Des:
<!-- DT:Rich -->
<p>This package provides the ISO-639 Language code list, the ISO-3166
Territory code list, and ISO-3166-2 sub-territory lists, and all their
translations in gettext .po form.
</p>
-Des:
##----------------------------------------
=Pkg: iso_ent 2000.11.03 691 noarch
=Sum: Character Entity Sets for ISO 8879:1986
+Des:
<!-- DT:Rich -->
<p>Character entity sets for ISO 8879:1986.
</p>
-Des:
##----------------------------------------
=Pkg: iwidgets 4.0.1 260 noarch
=Sum: Widget Extention for Tcl/Tk
+Des:
<!-- DT:Rich -->
<p>[incr Widgets] is an object-oriented mega-widget set that extends
Tcl/Tk and is based on [incr Tcl] and [incr Tk]. This set of mega-widgets
delivers many new, general purpose widgets like option menus, comboboxes,
selection boxes, and various dialogs whose counterparts are found in Motif
and Windows. Since [incr Widgets] is based on the [incr Tk] extension, the
Tk framework of configuration options, widget commands, and default bindings
is maintained. In other words, each [incr Widgets] mega-widget seamlessly
blends with the standard Tk widgets. They look, act, and feel like Tk
widgets. In addition, all [incr Widgets] mega-widgets are object oriented and
may themselves be extended, using either inheritance or composition.
</p>
-Des:
##----------------------------------------
=Pkg: jaf 1.1 16 noarch
=Sum: JavaBeans Activation Framework
+Des:
<!-- DT:Rich -->
<p>With the JavaBeansTM Activation Framework standard extension,
developers who use JavaTM technology can take advantage of standard
services to determine the type of an arbitrary piece of data,
encapsulate access to it, discover the operations available on it, and
to instantiate the appropriate bean to perform said operations. For
example, if a browser obtained a JPEG image, this framework would enable
the browser to identify that stream of data as an JPEG image and, from
that type, the browser could locate and instantiate an object that could
manipulate or view that image.
The JavaBeans Activation Framework is implemented as a standard
extension. Sun provides a royalty-free reference implementation of the
JAF software, in binary form, that developers can use to develop JAF
technology-enabled applications for any platform that supports the Java
Development Kit (JDKTM) 1.1 software or the JavaTM 2 Standard Edition.
</p>
-Des:
##----------------------------------------
=Pkg: jaf-demo 1.1 16 noarch
=Sum: Demonstrations and samples for jaf.
+Des:
<!-- DT:Rich -->
<p>Demonstrations and samples for jaf.
</p>
-Des:
##----------------------------------------
=Pkg: jaf-javadoc 1.1 16 noarch
=Sum: Javadoc documentation for jaf.
+Des:
<!-- DT:Rich -->
<p>Javadoc documentation for jaf.
</p>
-Des:
##----------------------------------------
=Pkg: jaf-manual 1.1 16 noarch
=Sum: Documentation for jaf.
+Des:
<!-- DT:Rich -->
<p>Documentation for jaf.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-beanutils 1.7.0 42 noarch
=Sum: Jakarta Commons BeanUtils Package
+Des:
<!-- DT:Rich -->
<p>The scope of this package is to create a package of Java utility methods
for accessing and modifying the properties of arbitrary JavaBeans. No
dependencies outside of the JDK are required, so the use of this package
is very lightweight.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-codec 1.3 38 noarch
=Sum: Implementations of common encoders and decoders
+Des:
<!-- DT:Rich -->
<p>Commons Codec provides implementations of common encoders and decoders such as Base64, Hex, various phonetic encodings, and URLs.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-collections 3.1 41 noarch
=Sum: Jakarta Commons Collections Package
+Des:
<!-- DT:Rich -->
<p>The introduction of the Collections API by Sun in JDK 1.2 has been a
boon to quick and effective Java programming. Ready access to powerful
data structures has accelerated development by reducing the need for
custom container classes around each core object. Most Java2 APIs are
significantly easier to use because of the Collections API.
However, there are certain holes left unfilled by Sun's
implementations, and the Jakarta-Commons Collections Component strives
to fulfill them. Among the features of this package are:<ul>
<li>special-purpose implementations of Lists and Maps for fast access
</li><li>adapter classes from Java1-style containers (arrays, enumerations) to
Java2-style collections
</li><li>methods to test or create typical set theory properties of collections
such as union, intersection, and closure
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-daemon 1.0.1 35 noarch
=Sum: Jakarta Commons Daemon Package
+Des:
<!-- DT:Rich -->
<p>The scope of this package is to define an API in line with the current
Java(tm) Platform APIs to support an alternative invocation mechanism
that could be used instead of the public static void
main(String[]) method. This specification covers the behavior and life
cycle of what is defined as Java(tm) daemons or, in other words,
noninteractive Java(tm) applications.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-dbcp 1.2.1 42 noarch
=Sum: Jakarta Commons DataBase Pooling Package
+Des:
<!-- DT:Rich -->
<p>The DBCP package creates and maintains a database connection pool
package written in the Java language to be distributed under the ASF
license. The package is available as a pseudo-JDBC driver and
via a DataSource interface. The package also supports multiple
logins to multiple database systems, reclamation of stale or dead
connections, testing for valid connections, PreparedStatement
pooling, and other features.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-digester 1.7 38 noarch
=Sum: Jakarta Commons Digester Package
+Des:
<!-- DT:Rich -->
<p>The goal of the Jakarta Commons Digester project is to create and
maintain an XML to Java object mapping package written in the Java
language to be distributed under the ASF license.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-discovery 0.3 39 noarch
=Sum: Jakarta Commons Discovery
+Des:
<!-- DT:Rich -->
<p>The Discovery component is about discovering, or finding, implementations
for pluggable interfaces. Pluggable interfaces are specified with the
intent that multiple implementations are, or will be, available to provide
the service described by the interface. Discovery provides facilities for finding and instantiating classes and for lifecycle management of singleton (factory) classes.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-el 1.0 42 noarch
=Sum: The Jakarta Commons Extension Language
+Des:
<!-- DT:Rich -->
<p>An implementation of standard interfaces and abstract classes for
javax.servlet.jsp.el, which is part of the JSP 2.0 specification.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-httpclient3 3.0.1 19 noarch
=Sum: Feature rich package for accessing resources via HTTP
+Des:
<!-- DT:Rich -->
<p>Although the java.net package provides basic functionality for accessing resources via HTTP, it doesn't provide the full flexibility or functionality needed by many applications. The Jakarta Commons HttpClient component seeks to fill this void by providing an efficient, up-to-date, and feature-rich package implementing the client side of the most recent HTTP standards and recommendations.
</p><p>
Designed for extension while providing robust support for the base HTTP protocol, the HttpClient component may be of interest to anyone building HTTP-aware client applications such as web browsers, web service clients, or systems that leverage or extend the HTTP protocol for distributed communication.
=Sum: Demonstration files for jakarta-commons-httpclient3
+Des:
<!-- DT:Rich -->
<p>Demonstration files for jakarta-commons-httpclient3.
NOTE: It is possible that some demonstration files are specially prepared for SUN Java runtime environment. If they fail with IBM or BEA Java, the package itself does not need to be broken.
methods, object reflection, creation and serialization, and system
properties. Additionally it contains an inheritable enum type, an
exception structure that supports multiple types of nested exceptions,
and a series of utilities dedicated to helping with building methods, such
as hashCode, toString and equals.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-launcher 0.9 42 noarch
=Sum: A Cross-Platform Java Application Launcher
+Des:
<!-- DT:Rich -->
<p>Commons-launcher eliminates the need for a batch or shell script to launch a Java class. Some situations where elimination of a batch or shell script may be desirable are:
<ul>
<li>You want to avoid having to determining where certain application paths are, for example, your application's home directory. Determining this dynamically in a Windows batch scripts is very tricky on some versions of Windows or when softlinks are used on Unix platforms.
</li><li>You want to avoid having to handle native file and path separators or native path quoting issues.
</li><li>You need to enforce certain system properties, such as java.endorsed.dirs when running with JDK 1.4.
</li><li>You want to allow users to pass custom JVM arguments or system properties without having to parse and reorder arguments in your script. This can be tricky or messy in batch and shell scripts.
</li><li>You want to bootstrap system properties from a configuration file instead hard-coding them in your batch and shell scripts.
</li><li>You want to provide localized error messages, which is very tricky to do in batch and shell scripts.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-logging 1.0.4 43 noarch
=Sum: Jakarta Commons Logging Package
+Des:
<!-- DT:Rich -->
<p>The commons-logging package provides a simple, component oriented
interface (org.apache.commons.logging.Log) together with wrappers for
logging systems. The user can choose at runtime which system they want
to use. In addition, a small number of basic implementations are
provided to allow users to use the package independently.
commons-logging was heavily influenced by Avalon's Logkit and Log4J. The
commons-logging abstraction is meant to minimize the differences between
the two and to allow a developer to not tie himself to a particular
logging implementation.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-pool 1.2 41 noarch
=Sum: Jakarta Commons Pool Package
+Des:
<!-- DT:Rich -->
<p>The goal of the Pool package is to create and maintain an object
(instance) pooling package to be distributed under the ASF license.
The package supports a variety of pool implementations, but
encourages support of an interface that makes these implementations
interchangeable.
</p>
-Des:
##----------------------------------------
=Pkg: jarnal 7.84 32 noarch
=Sum: Jarnal is a java based notetaking/sketching application
+Des:
<!-- DT:Rich -->
<p>Jarnal is a java based notetaking/sketching application similar to Microsoft One-Note. For tablet PCs it provides the ability to take handwritten notes; for desktop PCs it allows users to take notes using the mouse (or more sensibly) using the keyboard. Each page is stored in SVG format, and the SVG pages are stored in a standard Zip file.
</p>
-Des:
##----------------------------------------
=Pkg: javamail 1.4 16 noarch
=Sum: The JavaMail(TM) API
+Des:
<!-- DT:Rich -->
<p>The JavaMail(TM) 1.3 API provides a set of abstract classes that model a
mail system. The API provides a platform independent and protocol
independent framework to build Java technology-based mail and messaging
applications. The JavaMail(TM) API is implemented as a Java platform
optional package and is also available as part of the Java 2 platform,
Enterprise Edition. Sun provides a royalty-free reference
implementation, in binary form, that developers will be able to use and
ship.
</p>
-Des:
##----------------------------------------
=Pkg: javamail-demo 1.4 16 noarch
=Sum: Demonstrations and samples for javamail.
+Des:
<!-- DT:Rich -->
<p>Demonstrations and samples for javamail.
</p>
-Des:
##----------------------------------------
=Pkg: javamail-javadoc 1.4 16 noarch
=Sum: Javadoc documentation for javamail.
+Des:
<!-- DT:Rich -->
<p>Javadoc documentation for javamail.
</p>
-Des:
##----------------------------------------
=Pkg: javamail-manual 1.4 16 noarch
=Sum: Manual for javamail
+Des:
<!-- DT:Rich -->
<p>Documentation for javamail.
</p>
-Des:
##----------------------------------------
=Pkg: javamail-monolithic 1.4 16 noarch
=Sum: All javamail in one monolithic jar.
+Des:
<!-- DT:Rich -->
<p>All javamail in one monolithic jar.
</p>
-Des:
##----------------------------------------
=Pkg: jedit 4.2 41 noarch
=Sum: Programmer's Text Editor Written in Java
+Des:
<!-- DT:Rich -->
<p>jEdit is a cross-platform programmer's text editor written in Java.
</p><p>
Some of jEdit's features include:
<ul>
<li>Built-in macro language (BeanShell)
</li><li>Extensible plug-in architecture with more than 80 plug-ins available
</li><li>Plug-ins can be downloaded and installed from within jEdit using the plug-in manager feature
</li><li>Syntax highlighting for more than 80 languages
</li><li>Supports a large number of character encodings including UTF8 and Unicode
</li><li>Autoindenting of source code
</li><li>Folding (indent and marker based)
</li><li>Word wrap
</li><li>Unlimited undo and redo
</li><li>Highly configurable and customizable
</li><li>Every other feature, both basic and advanced, that you would expect to find in a text editor
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: jedit-javadoc 4.2 41 noarch
=Sum: Programmer's text editor written in Java (Documentation)
+Des:
<!-- DT:Rich -->
<p>Javadoc for jedit.
</p>
-Des:
##----------------------------------------
=Pkg: jms 1.1 36 noarch
=Sum: Java Message Service
+Des:
<!-- DT:Rich -->
<p>The Java Message Service (JMS) API has been developed by Sun working in
close cooperation with the leading enterprise messaging vendors.
Enterprise messaging is now recognized as an essential tool for building
enterprise applications. By combining Java technology with enterprise
messaging, the JMS API provides a new, powerful tool for solving
enterprise computing problems.
</p><p>
Enterprise messaging provides a reliable, flexible service for the
asynchronous exchange of critical business data and events throughout an
enterprise. The JMS API adds to this a common API and provider framework
that enables the development of portable, message based applications in
the Java programming language.
</p><p>
The JMS API improves programmer productivity by defining a common set of
messaging concepts and programming strategies that will be supported by
all JMS technology-compliant messaging systems.
</p>
-Des:
##----------------------------------------
=Pkg: jms-javadoc 1.1 36 noarch
=Sum: Javadoc documentation for jms.
+Des:
<!-- DT:Rich -->
<p>Javadoc documentation for jms.
</p>
-Des:
##----------------------------------------
=Pkg: jmx 1.2.1 35 noarch
=Sum: Java Management Extensions
+Des:
<!-- DT:Rich -->
<p>JavaTM Management Extensions (JMX) represent a universal,
open technology for management and monitoring ready
to be deployed across all industries, wherever management
or monitoring is or will be needed.
</p>
-Des:
##----------------------------------------
=Pkg: jmx-javadoc 1.2.1 35 noarch
=Sum: Javadoc documentation for jmx.
+Des:
<!-- DT:Rich -->
<p>Javadoc documentation for jmx.
</p>
-Des:
##----------------------------------------
=Pkg: jsclasses 20020207 611 noarch
=Sum: pLaTeX2e New Potential Japanese Standard Document Class
+Des:
<!-- DT:Rich -->
<p>pLaTeX2e new potential Japanese standard document class.
</p>
-Des:
##----------------------------------------
=Pkg: jta 1.0.1 41 noarch
=Sum: Java Transaction API
+Des:
<!-- DT:Rich -->
<p>JTA specifies standard Java(tm) interfaces between a transaction manager
and the parties involved in a distributed transaction system: the
resource manager, the application server, and the transactional
applications.
</p>
-Des:
##----------------------------------------
=Pkg: jta-javadoc 1.0.1 41 noarch
=Sum: Javadoc documentation for jta.
+Des:
<!-- DT:Rich -->
<p>JTA specifies standard Java(tm) interfaces between a transaction manager
and the parties involved in a distributed transaction system: the
resource manager, the application server, and the transactional
applications.
</p><p>
This package contains the javadoc documentation for jta.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-cs 3.5.5 3 noarch
=Sum: Czech Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a Czech desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-da 3.5.5 3 noarch
=Sum: Danish Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a Danish desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-de 3.5.5 3 noarch
=Sum: German Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a German Desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-en_GB 3.5.5 3 noarch
=Sum: English (UK) Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in British English. This package contains
application translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-es 3.5.5 3 noarch
=Sum: Spanish Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a Spanish desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-fi 3.5.5 3 noarch
=Sum: Finnish Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a Finnish desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-fr 3.5.5 3 noarch
=Sum: French Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a French desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-hu 3.5.5 3 noarch
=Sum: Hungarian Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a Hungarian desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-it 3.5.5 3 noarch
=Sum: Italian Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for an Italian desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-ja 3.5.5 3 noarch
=Sum: Japanese Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a Japanese desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-km 3.5.5 3 noarch
=Sum: Khmer Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a Khmer Desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-nb 3.5.5 3 noarch
=Sum: Norwegian (Bokmaal) Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a Norwegian (Bokmaal) desktop. This package contains application translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-nl 3.5.5 3 noarch
=Sum: Dutch Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a Dutch desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-pl 3.5.5 3 noarch
=Sum: Polish Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a Polish desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-pt_BR 3.5.5 3 noarch
=Sum: Brazilian Portuguese Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Brazilian Portuguese. This package contains
application translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-zh_CN 3.5.5 3 noarch
=Sum: Simplified Chinese Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a simplified Chinese desktop. This package contains application translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-zh_TW 3.5.5 3 noarch
=Sum: Chinese Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a Chinese desktop. This package contains application
translations, help files, and screen shots.
</p>
-Des:
##----------------------------------------
=Pkg: kdedesktopcheck 0.1 32 noarch
=Sum: Perl Script for Integrity Checks on .desktop Files
+Des:
<!-- DT:Rich -->
<p>This tool is intended for quality assurance of desktop files. It does many integrity checks on .desktop files, for example, whether icon and executable are defined and also installed on the system.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-devel-doc 3.5.5 45 noarch
=Sum: Additional Package Documentation
+Des:
<!-- DT:Rich -->
<p>This package contains a generated API documentation for all library classes
provided by kdelibs. The index page for all KDE API functions is:
</p><p>
file:/usr/share/doc/KDE3-API/index.html
</p>
-Des:
##----------------------------------------
=Pkg: kernel-docs 2.6.18.2 34 noarch
=Sum: Kernel Documentation
+Des:
<!-- DT:Rich -->
<p>These are the PDF documents and man pages (section 9) built from the
current kernel sources.
</p>
-Des:
##----------------------------------------
=Pkg: keychain 2.6.2 25 noarch
=Sum: A Key Management Application for SSH2 RSA/DSA Keys
+Des:
<!-- DT:Rich -->
<p>Keychain is an extremely handy OpenSSH and commercial SSH2-compatible RSA/DSA
key management application. It acts as a front-end to ssh-agent, allowing you
to easily have one long-running ssh-agent process per system, rather than per
login session. This dramatically reduces the number of times you need to enter
your passphrase from once per new login session to once every time your local
machine is rebooted.
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-cs 1.6.0 4 noarch
=Sum: Czech translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Czech translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-da 1.6.0 4 noarch
=Sum: Danish translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Danish translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-da-doc 1.6.0 4 noarch
=Sum: Danish translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Danish translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-de 1.6.0 4 noarch
=Sum: German translations for KOffice
+Des:
<!-- DT:Rich -->
<p>German translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-de-doc 1.6.0 4 noarch
=Sum: German translations for KOffice
+Des:
<!-- DT:Rich -->
<p>German translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-en_GB 1.6.0 4 noarch
=Sum: English (UK) translations for KOffice
+Des:
<!-- DT:Rich -->
<p>English (UK) translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-en_GB-doc 1.6.0 4 noarch
=Sum: English (UK) translations for KOffice
+Des:
<!-- DT:Rich -->
<p>English (UK) translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-es 1.6.0 4 noarch
=Sum: Spanish translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Spanish translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-et-doc 1.6.0 4 noarch
=Sum: Estonian translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Estonian translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-fi 1.6.0 4 noarch
=Sum: Finnish translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Finnish translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-fr 1.6.0 4 noarch
=Sum: French translations for KOffice
+Des:
<!-- DT:Rich -->
<p>French translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-fr-doc 1.6.0 4 noarch
=Sum: French translations for KOffice
+Des:
<!-- DT:Rich -->
<p>French translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-hu 1.6.0 4 noarch
=Sum: Hungarian translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Hungarian translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-it 1.6.0 4 noarch
=Sum: Italian translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Italian translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-it-doc 1.6.0 4 noarch
=Sum: Italian translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Italian translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-ja 1.6.0 4 noarch
=Sum: Japanese translations for KDE
+Des:
<!-- DT:Rich -->
<p>Japanese translations for KDE
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-nb 1.6.0 4 noarch
=Sum: Norwegian (Bokmaal) translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Norwegian (Bokmaal) translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-nl 1.6.0 4 noarch
=Sum: Dutch translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Dutch translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-nl-doc 1.6.0 4 noarch
=Sum: Dutch translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Dutch translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-pl 1.6.0 4 noarch
=Sum: Polish translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Polish translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-pt-doc 1.6.0 4 noarch
=Sum: Portuguese translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Portuguese translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-pt_BR 1.6.0 4 noarch
=Sum: Brazil Portuguese translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Brazil Portuguese translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-pt_BR-doc 1.6.0 4 noarch
=Sum: Brazil Portuguese translations for KOffice
+Des:
<!-- DT:Rich -->
<p>Brazil Portuguese translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-zh_CN 1.6.0 4 noarch
=Sum: simplified Chinese translations for KOffice
+Des:
<!-- DT:Rich -->
<p>simplified Chinese translations for KOffice
</p>
-Des:
##----------------------------------------
=Pkg: koffice-i18n-zh_TW 1.6.0 4 noarch
=Sum: Chinese translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the stuff for a Chinese desktop. This package contains application
translations, help files and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: krb5-doc 1.5.1 27 noarch
=Sum: MIT Kerberos5 Implementation--Documentation
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network's security by eliminating the insecure
practice of clear text passwords.
This package includes extended documentation for MIT Kerberos.
</p>
-Des:
##----------------------------------------
=Pkg: latex-ucs 20041017 31 noarch
=Sum: Unicode Support for LaTeX
+Des:
<!-- DT:Rich -->
<p>This package contains support for using UTF-8 as input encoding in
LaTeX documents.
</p>
-Des:
##----------------------------------------
=Pkg: latex2html 2002.2.1 401 noarch
=Sum: LaTeX2HTML Converter
+Des:
<!-- DT:Rich -->
<p>LaTeX2HTML lets you easily convert basic LaTeX documents
into the HTML format. This allows both a written and
online version even of older LaTeX texts.
</p><p>
Find documentation in /usr/share/doc/packages/latex2html.
</p>
-Des:
##----------------------------------------
=Pkg: latex2html-pngicons 2002.2.1 401 noarch
=Sum: Icons in the PNG format for the LaTeX to HTML Converter
+Des:
<!-- DT:Rich -->
<p>Icons in the PNG format for the LaTeX to HTML Converter.
<p>The package contains documentation and examples to develop Qt
applications. The SuSE help provides a search function for this documentation.
The package includes also a tutorial and examples.
</p>
-Des:
##----------------------------------------
=Pkg: log4net 1.2.9 38 noarch
=Sum: A .NET framework for logging
+Des:
<!-- DT:Rich -->
<p>log4net is a tool to help the programmer output log statements to a variety of output targets. log4net is a port of the excellent log4j framework to the .NET runtime
</p>
-Des:
##----------------------------------------
=Pkg: makedev 2.6 438 noarch
=Sum: Script for Creating Device Files in /dev
+Des:
<!-- DT:Rich -->
<p>This package contains the MAKEDEV script, which makes it easy to create
and maintain the files in the /dev directory.
</p><p>
You do not need this script on SUSE Linux, but it is needed for FHS 2.1.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages 2.41 11 noarch
=Sum: Linux and POSIX Manual Pages
+Des:
<!-- DT:Rich -->
<p>This package contains a large collection of Linux and POSIX manual pages
(man pages, documentation) from the Linux Documentation Project (LDP).
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-es 1.55 20 noarch
=Sum: LDP man Page (Spanish)
+Des:
<!-- DT:Rich -->
<p>LDP man Page (Spanish)
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-fr 1.58.1 31 noarch
=Sum: LDP man Pages (French)
+Des:
<!-- DT:Rich -->
<p>These are the French man pages of the Linux Documentation Project.
Note that they are normally older than the English versions. For reference,
you should use the English versions.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-it 0.3.0 564 noarch
=Sum: LDP man Pages (Italian)
+Des:
<!-- DT:Rich -->
<p>These are the Italian man pages of the Linux Documentation Project.
Note that they are normally older than the English versions. For reference,
you should use the English versions.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-ja 20050715 34 noarch
=Sum: LDP man Pages (Japanese)
+Des:
<!-- DT:Rich -->
<p>These are the Japanese man pages of the Linux Documentation Project.
Note that they are normally older than the English versions. For reference,
you should use the English versions.
</p>
-Des:
##----------------------------------------
=Pkg: manufacturer-PPDs 10.2 20 noarch
=Sum: PPD Files from Printer Manufacturers
+Des:
<!-- DT:Rich -->
<p>PPD files from printer manufacturers that are under a free license.
</p><p>
For example, the original MIT license, shown for example under http://www.opensource.org/licenses/mit-license.php,
is okay but not an often used modified MIT license, which does not allow
redistribution if the file was altered in any way from its original form.
</p><p>
If you have a PostScript printer and there is no PPD file included in this package, ask your printer manufacturer for a PPD file or visit
http://www.linuxprinting.org/ppd-doc.html.
</p>
-Des:
##----------------------------------------
=Pkg: metacity-themes 0.1 527 noarch
=Sum: Themes for the Metacity Window Manager
+Des:
<!-- DT:Rich -->
<p>This package contains themes usable with the Metacity window manager for the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: mgopen-fonts 0.20050518 35 noarch
=Sum: Free High-Quality Greek Fonts
+Des:
<!-- DT:Rich -->
<p>Free high-quality Greek fonts created by Magenta Ltd.
</p>
-Des:
##----------------------------------------
=Pkg: mono-basic 1.1.18 9 noarch
=Sum: Mono's VB runtime
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Mono's VB runtime.
</p>
-Des:
##----------------------------------------
=Pkg: mono-tools 1.1.17 28 noarch
=Sum: Collection of Tools and Utilities for Mono
+Des:
<!-- DT:Rich -->
<p>Mono Tools is a collection of development and testing programs and
utilities for use with Mono.
</p>
-Des:
##----------------------------------------
=Pkg: monodoc-core 1.1.18 9 noarch
=Sum: Monodoc--A Documentation Browser Written in C#
+Des:
<!-- DT:Rich -->
<p>Monodoc is a documentation browser for the Mono
project. It is written in C# using the GTK# libraries.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-american 20040623 47 noarch
=Sum: American Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The American dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite, the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-brazilian 20020806 47 noarch
=Sum: Brazilian Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Brazilian dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-british 20050526 41 noarch
=Sum: British Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The British dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-czech 20030907 73 noarch
=Sum: Czech Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Czech dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-danish 20060727 9 noarch
=Sum: Danish Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Danish dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-dutch 20050719 41 noarch
=Sum: Dutch Dictionary for MySpell.
+Des:
<!-- DT:Rich -->
<p>The Dutch dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-french 20060914 9 noarch
=Sum: French Dictionary for MySpell.
+Des:
<!-- DT:Rich -->
<p>The French dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-german 20060125 9 noarch
=Sum: German Dictionary for MySpell.
+Des:
<!-- DT:Rich -->
<p>The German dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-german-old 20030428 140 noarch
=Sum: Old German Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The old German dictionary for MySpell. It provides spell checking according to the old German spelling rules.
</p><p>
The MySpell spell checker is used by the OpenOffice.org office suite, the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-hungarian 1.1.1 10 noarch
=Sum: Hungarian Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Hungarian Dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-italian 20050711 41 noarch
=Sum: Italian Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Italian dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-norsk-bokmaal 20060428 9 noarch
=Sum: Norwegian Bokmaal Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Norwegian Bokmaal dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-polish 20060908 9 noarch
=Sum: Polish Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Polish dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-spanish 20051029 39 noarch
=Sum: Spanish Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Spanish dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: nant 0.85.0 11 noarch
=Sum: Ant for .NET
+Des:
<!-- DT:Rich -->
<p>NAnt is a free .NET build tool. In theory it is kind of like make without
make's wrinkles. In practice it's a lot like Ant.
</p>
-Des:
##----------------------------------------
=Pkg: netcfg 10.2 20 noarch
=Sum: Network Configuration Files in /etc
+Des:
<!-- DT:Rich -->
<p>All of the basic configuration files for the network programs
including /etc/aliases, /etc/protocols,
and /etc/services.
</p><p>
These are often used by network routines in the C library and therefore must
be installed for all network programs.
</p>
-Des:
##----------------------------------------
=Pkg: nxml-mode 20041004 37 noarch
=Sum: New Emacs Add-On for Editing XML Documents
+Des:
<!-- DT:Rich -->
<p>'nxml-mode' is a new major mode for GNU Emacs for editing XML documents. It
supports editing well-formed XML documents and also provides
schema-sensitive editing of XML documents using RELAX NG Compact
Syntax.
</p><p>
To use this, you need GNU Emacs version 21.x, preferably 21.3. XEmacs will not work properly.
</p>
-Des:
##----------------------------------------
=Pkg: opensuse-gnomeuser_en 10.2 22 noarch
=Sum: openSUSE GNOME User Guide (English)
+Des:
<!-- DT:Rich -->
<p>openSUSE GNOME User Guide (English).
</p>
-Des:
##----------------------------------------
=Pkg: opensuse-manual_de 10.2 7 noarch
=Sum: openSUSE Manual (German)
+Des:
<!-- DT:Rich -->
<p>openSUSE Manual (German).
</p>
-Des:
##----------------------------------------
=Pkg: opensuse-manual_en 10.2 28 noarch
=Sum: openSUSE Manual (English)
+Des:
<!-- DT:Rich -->
<p>openSUSE Manual (English).
</p>
-Des:
##----------------------------------------
=Pkg: opensuse-quickstart_de 10.2 5 noarch
=Sum: openSUSE Quickstarts (German)
+Des:
<!-- DT:Rich -->
<p>openSUSE Quickstarts (German).
</p>
-Des:
##----------------------------------------
=Pkg: opensuse-quickstart_en 10.2 9 noarch
=Sum: openSUSE Quickstarts (English)
+Des:
<!-- DT:Rich -->
<p>openSUSE Quickstarts (English).
</p>
-Des:
##----------------------------------------
=Pkg: passivetex 2004.3.10 35 noarch
=Sum: PassiveTeX
+Des:
<!-- DT:Rich -->
<p>Usage: pdfxmltex datei.fo
</p><p>
Extract from http://www.tei-c.org.uk/Software/passivetex/ :
</p><p>
PassiveTeX is a library of TeX macros which can be used to process an
XML document which results from an XSL transformation to formatting
objects.
</p><p>
PassiveTeX provides a rapid development environment for
experimenting with XSL FO, using a reliable pre-existing formatter
</p><p>
Running PassiveTeX with the pdfTeX variant of TeX generates
high-quality PDF files in a single operation.
</p><p>
PassiveTeX shows how TeX can remain the formatter of choice for XML,
while hiding the details of its operation from the user.
</p>
-Des:
##----------------------------------------
=Pkg: pciutils-ids 2006.11.18 2 noarch
=Sum: PCI-utilities for Kernel version 2.2 and newer
+Des:
<!-- DT:Rich -->
<p>lspci: This program displays detailed information about all PCI busses and devices
in the system, replacing the original /proc/pci interface.
</p><p>
setpci: This program allows reading from and writing to PCI device configuration
registers. For example, you can adjust the latency timers with it.
</p><p>
update-pciids: This program downloads the current version of the pci.ids file.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pear-log 1.9.8 29 noarch
=Sum: PEAR Logging utilities
+Des:
<!-- DT:Rich -->
<p>The Log framework for PEAR provides an abstracted logging system. It supports logging to console, file, syslog, SQL, Sqlite, mail and mcal targets. It also provides a subject - observer mechanism.
and the ARCHIVES.gz file for the desired information. It shows README, README.SuSE, and FAQ, when available.
</p>
-Des:
##----------------------------------------
=Pkg: providers 2006.11.21 3 noarch
=Sum: A list of internet service providers
+Des:
<!-- DT:Rich -->
<p>A list of predefined internet service providers which are used for
configuration with YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: psgml 1.3.2 34 noarch
=Sum: Emacs Add-On to edit SGML/XML documents
+Des:
<!-- DT:Rich -->
<p>'psgml' supports you while editing SGML/XML documents. It respects the context
of the used DTD (Document Type Definition) and offers the valid elements
and attributes.
</p><p>
Included are several helper tools: tdtd, xxml, psgml-xpointer.
</p><p>
For more info see README.SuSE.
</p><p>
Compiled for GNU Emacs (XEmacs has its own version!).
</p>
-Des:
##----------------------------------------
=Pkg: qlogic-firmware 1.0 34 noarch
=Sum: Firmware files for Qlogic FibreChannel Cards (QLA2XXX Series)
+Des:
<!-- DT:Rich -->
<p>Firmware files for the QLogic QLA2XXX Series of FibreChannel
HBA Adapters.
</p><p>
For the current version of the individual firmware files
please check the CURRENT_VERSIONS file in
/usr/share/doc/packages/qlogic-firmware/
</p><p>
For the license see the LICENSE file in
/usr/share/doc/packages/qlogic-firmware/
</p>
-Des:
##----------------------------------------
=Pkg: qt3-devel-doc 3.3.7 12 noarch
=Sum: Qt 3 Development Kit
+Des:
<!-- DT:Rich -->
<p>You need this package if you want to compile programs with Qt 3. It
contains the "Qt Crossplatform Development Kit 2". You will find include
files, documentation, precompiled examples, and a tutorial for getting started
with Qt in /usr/lib/qt3.
</p>
-Des:
##----------------------------------------
=Pkg: regexp 1.3 41 noarch
=Sum: Simple regular expressions API
+Des:
<!-- DT:Rich -->
<p>Regexp is a 100% Pure Java Regular Expression package that was
graciously donated to the Apache Software Foundation by Jonathan Locke.
He originally wrote this software back in 1996 and it has stood up quite
well to the test of time.
It includes complete Javadoc documentation as well as a simple Applet
for visual debugging and testing suite for compatibility.
</p>
-Des:
##----------------------------------------
=Pkg: release-notes 10.2.15 3 noarch
=Sum: Most Important Changes for This openSUSE Release
+Des:
<!-- DT:Rich -->
<p>This package contains the description of the most important changes for this openSUSE release. In HTML format, they can be found in the /usr/share/doc/release-notes/SUSE_Linux directory.
</p>
-Des:
##----------------------------------------
=Pkg: ripit 3.5.1 20 noarch
=Sum: Perl Script to Create .ogg or .mp3 Files from an Audio CD
+Ins:
<!-- DT:Rich -->
<p>You have to download an MP3 encoder like "lame" (http://www.lame.org/) or BladeEnc (http://bladeenc.mp3.no/), to use the MP3 format.
Ripit defaults to Vorbis.
We are not allowed to put MP3 encoders on our CDs.
</p>
-Ins:
+Des:
<!-- DT:Rich -->
<p>This Perl script makes it easy to create MP3 files from an audio CD.
It tries to find the artist and song titles with the help of CDDB.
</p>
-Des:
##----------------------------------------
=Pkg: samba-doc 3.0.23d 6 noarch
=Sum: Samba Documentation
+Des:
<!-- DT:Rich -->
<p>This package contains all the Samba documentation as it is not part of the man pages.
</p>
-Des:
##----------------------------------------
=Pkg: sazanami-fonts 20040629 40 noarch
=Sum: Japanese "Sazanami" TrueType Fonts
+Des:
<!-- DT:Rich -->
<p>Japanese "Sazanami" TrueType Fonts
</p>
-Des:
##----------------------------------------
=Pkg: seccheck 2.0 551 noarch
=Sum: Security-Check Scripts
+Des:
<!-- DT:Rich -->
<p>Regularly executable scripts (via cron) for checking the security of your
system.
</p>
-Des:
##----------------------------------------
=Pkg: semi-xemacs 1.14.6 42 noarch
=Sum: library to provide MIME feature for XEmacs
+Des:
<!-- DT:Rich -->
<p>SEMI is a library to provide MIME feature for XEmacs. MIME is a
proposed internet standard for including content and headers other
than (ASCII) plain text in messages
</p>
-Des:
##----------------------------------------
=Pkg: servletapi4 4.0.4 40 noarch
=Sum: Java servlet and JSP implementation classes
+Des:
<!-- DT:Rich -->
<p>This subproject contains the source code for the implementation classes
of the Java Servlet and JSP APIs (packages javax.servlet).
</p>
-Des:
##----------------------------------------
=Pkg: sgi-fonts 1.0 749 noarch
=Sum: Very nice bitmapped fonts from SGI
+Des:
<!-- DT:Rich -->
<p>A few extra fonts from SGI, very readable.
</p>
-Des:
##----------------------------------------
=Pkg: sgml-skel 0.6 300 noarch
=Sum: Helper Scripts for the SGML System
+Des:
<!-- DT:Rich -->
<p>These scripts will help prepare and maintain parts of an SGML system.
</p>
-Des:
##----------------------------------------
=Pkg: sgmltools-lite 3.0.2 1115 noarch
=Sum: SGML Converter Suite
+Des:
<!-- DT:Rich -->
<p>Written in Python.
</p>
-Des:
##----------------------------------------
=Pkg: siga 10.101 32 noarch
=Sum: System Information GAthering
+Des:
<!-- DT:Rich -->
<p>SIGA stands for System Information GAthering.
It collects various system information and outputs
it in HTML or ASCII format. Since it needs root permissions,
you will be asked for the root password.
It is very handy as an information source during installation support
phone calls.
</p>
-Des:
##----------------------------------------
=Pkg: sitar 1.0.6 25 noarch
=Sum: System InformaTion at Runtime
+Des:
<!-- DT:Rich -->
<p>Sitar prepares system information using perl and binary tools,
and by reading the /proc file system. Output is in HTML, LaTeX
and (docbook) XML, and can be converted to PS and PDF.
</p><p>
This program must be run as "root".
</p><p>
sitar.pl includes scsiinfo by Eric Youngdale,
Michael Weller <eowmob@exp-math.uni-essen.de>
and ide_info by David A. Hinds <dhinds@hyper.stanford.edu>.
</p><p>
The accompanying tool "cfg2scm" is supplied for checking
configuration changes into SCMs (like SVN, CVS, ...)
or creating a tar-file with all relevant files.
</p><p>
Comment: Sitar is an ancient Indian instrument as well.
</p>
-Des:
##----------------------------------------
=Pkg: slib 3a1 79 noarch
=Sum: Portable Scheme Library
+Des:
<!-- DT:Rich -->
<p>SLIB is a portable Scheme library providing compatibility and utility
functions for all standard Scheme implementations.
</p>
-Des:
##----------------------------------------
=Pkg: snd_sf2 0.1.2 556 noarch
=Sum: Soundfont and MIDI Sample
+Des:
<!-- DT:Rich -->
<p>This package contains the following sound fonts: Vintage Dreams Waves v 2.0. by Ian
Wilson and GeneralUser 1.1 by Samuel Collins. Vintage Dreams Waves
features 128 analog synthesizer patches and 8 drum kits.
The sound font can be used with Sound Blaster AWE and SB Live! sound cards.
The package also provides a sample MIDI file for this sound font.
The ROM sound font GeneralUser 1.1 only works with SB AWE soundcards. It is
General MIDI compatible.
</p>
-Des:
##----------------------------------------
=Pkg: spectcl 1.1 835 noarch
=Sum: Interface Builder for Tcl/Tk and Java
+Des:
<!-- DT:Rich -->
<p>An interface builder for Tcl/Tk and Java.
</p><p>
Main Features of SpecTcl:<ul>
<li>Easy to Learn:SpecTcl's drag & drop interface along with a powerful toolbar and on-line help that make it easy to start building GUI applications.
</li><li>Tcl and Java Support: SpecTcl generates both Tcl and Java code. Note: this generates code for the old JDK 1.0
</li><li>Platform Independent: SpecTcl runs on all major platforms: Solaris, SunOS, Linux, Windows 95, Windows NT, MacOS, and Irix.
</li><li>Constraint Based Geometry Manager: Alignment and resizing of widgets (buttons, check boxes, and more.) is automatic. This makes creating dynamic UIs and cross platform UIs a snap!
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: subversion-doc 1.2 37 noarch
=Sum: A Concurrent Versioning System Similar to, but Better than CVS
+Des:
<!-- DT:Rich -->
<p>Subversion does the same things CVS does (Concurrent Versioning System) but has
major enhancements compared to CVS.
</p><p>
http://svnbook.red-bean.com/
</p>
-Des:
##----------------------------------------
=Pkg: suse-build-key 1.0 707 noarch
=Sum: The public gpg key for rpm package signature verification
+Del:
<!-- DT:Rich -->
<p>This package is needed if the authenticity of update packages
provided by YOU (Yast Online Update) needs to be checked.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>This package contains the gpg key that is used to sign
official SuSE rpm packages. It will be installed as a
keyring in /usr/lib/rpm/gnupg/pubring.gpg. Administrators
who wish to add their own keys to verify against should
use the following commandline command to add the key to the
keyring as used by RPM:
</p><p>
gpg --no-options --no-default-keyring \
--keyring /usr/lib/rpm/gnupg/pubring.gpg --import
</p>
-Des:
##----------------------------------------
=Pkg: suseRegister 1.1 28 noarch
=Sum: Registration Tool
+Des:
<!-- DT:Rich -->
<p>Command line tool for registering Novell and SUSE products.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp 2006.06.20 25 noarch
=Sum: SuSE Help-System (base)
+Des:
<!-- DT:Rich -->
<p>This package contains the basics of the SuSE Help System.
</p><p>
The SuSE Help System centralizes all Linux documentation in a clear,
structured manner with convenient search capabilities.
For quick start, click on the lifesaver in the desktop panel. For configuration, use
the KDE Control Center.
</p><p>
For more information, have a look at /usr/share/doc/packages/susehelp/README.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_cz 2006.06.20 25 noarch
=Sum: SuSE Help System (Czech)
+Des:
<!-- DT:Rich -->
<p>This package contains the Czech localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_de 2006.06.20 25 noarch
=Sum: SuSE Help System (German)
+Des:
<!-- DT:Rich -->
<p>This package contains the German localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_en 2006.06.20 25 noarch
=Sum: SuSE Help System (English)
+Des:
<!-- DT:Rich -->
<p>This package contains the English localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_es 2006.06.20 25 noarch
=Sum: SuSE Help System (Spanish)
+Des:
<!-- DT:Rich -->
<p>This package contains the Spanish localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_fr 2006.06.20 25 noarch
=Sum: SuSE Help-System (French)
+Des:
<!-- DT:Rich -->
<p>This package contains the French localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_hu 2006.06.20 25 noarch
=Sum: SuSE Help System (Hungarian)
+Des:
<!-- DT:Rich -->
<p>This package contains the Hungarian localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_it 2006.06.20 25 noarch
=Sum: SuSE Help System (Italian)
+Des:
<!-- DT:Rich -->
<p>This package contains the Italian localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
<p>Tamago offers a multilingual input environment for GNU Emacs (>= 20.5).
It is completely written in Emacs Lisp and can use the backends
FreeWnn (jserver, cserver, tserver), Wnn6, SJ3 Ver.2, and Canna.
</p>
-Des:
##----------------------------------------
=Pkg: tango-icon-theme 0.7.2 36 noarch
=Sum: Tango Icon Theme
+Des:
<!-- DT:Rich -->
<p>Tango Icon Theme
</p>
-Des:
##----------------------------------------
=Pkg: tcllib 1.9 11 noarch
=Sum: Tcl Standard Library
+Des:
<!-- DT:Rich -->
<p>This package is intended to be a collection of Tcl packages that provide utility
functions useful to a large collection of Tcl programmers.
</p>
-Des:
##----------------------------------------
=Pkg: tei-xsl-stylesheets 5.2.9 30 noarch
=Sum: XSL stylesheets for TEI XML
+Des:
<!-- DT:Rich -->
<p>Stylesheets to transform TEI XML documents (p4 and p5) to HTML, and to XSL Formatting Objects (FO). You can also produce LaTeX output.
</p><p>
Use it with libxslt or Saxon.
</p>
-Des:
##----------------------------------------
=Pkg: tei_3 2001.1.8 123 noarch
=Sum: TEI and TEI Lite DTD
+Des:
<!-- DT:Rich -->
<p>If you want to mark up literary and linguistic texts like poems, plays, or novels for online research and printing, the DTD of the TEI (Text Encoding Initiative) is the way to go.
</p><p>
A special TEI Lite DTD as a subset of the complex TEI DTD is also included. Often the "lite" version is sufficient to markup texts.
</p><p>
If you want to start a new project, consider using version P4 (tei_4).
</p>
-Des:
##----------------------------------------
=Pkg: tei_4 2004.1.30 82 noarch
=Sum: TEI 4 DTD (SGML and XML)
+Des:
<!-- DT:Rich -->
<p>If you want to mark up literary and linguistic texts for online research or for printing, the DTD of the TEI (Text Encoding Initiative) is the way to go.
The TEI DTD comes with special markup for poems, plays, and novels as well as for critical apparatus, taxonomy systems, etc.
</p>
-Des:
##----------------------------------------
=Pkg: terminus-font 4.20 25 noarch
=Sum: readable fixed width fonts for X11 and the Linux console
+Del:
<!-- DT:Rich -->
<p>Terminus Font is designed for long (8 and more hours per day) work
with computers. Version 4.03 contains 538 characters, covering code
10x20-normal, 10x20-bold, 12x24-normal, 12x24-bold and 14x28-normal
(which's weight is actually between normal and bold).
</p>
-Del:
##----------------------------------------
=Pkg: tkcon 2.4 33 noarch
=Sum: Enhanced Tk Console
+Des:
<!-- DT:Rich -->
<p>Tkcon is a replacement for the standard console that comes with Tk
(on Windows/Mac, but also works on Unix).
</p><p>
The console itself provides many more features than the standard console. Tkcon works on all platforms where Tcl/Tk is available. It is meant primarily to help when working with the little details inside Tcl and Tk, giving Unix users the GUI console provided by default in the Mac and Windows Tk. It is also not a bad replacement for the default MS-DOS shell (although it needs lots of fine tuning).
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic 20001125 623 noarch
=Sum: Chinese TrueType fonts by Arphic Technology (only the license text is present in this package)
+Des:
<!-- DT:Rich -->
<p>Chinese TrueType fonts by Arphic Technology. This package contains
only the license texts. The fonts themselves are in the sub-packages
ttf-arphic-bkai00mp, ttf-arphic-bsmi00lp, ttf-arphic-gkai00mp, and
ttf-arphic-gbsn00lp.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic-bkai00mp 20001125 623 noarch
=Sum: AR PL KaitiM Big5 Chinese TrueType font by Arphic Technology
+Des:
<!-- DT:Rich -->
<p>AR PL KaitiM Big5 is a high quality Chinese TrueType font
(bkai00mp.ttf) generously provided by Arphic Technology to the Free
Software community under the Arphic Public License.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic-bsmi00lp 20001125 623 noarch
=Sum: AR PL Mingti2L Big5 Chinese TrueType font by Arphic Technology
+Des:
<!-- DT:Rich -->
<p>AR PL Mingti2L Big5 is a high quality Chinese TrueType font
(bsmi00lp.ttf) generously provided by Arphic Technology to the Free
Software community under the Arphic Public License.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic-gbsn00lp 20001125 623 noarch
=Sum: AR PL SungtiL GB Chinese TrueType font by Arphic Technology
+Des:
<!-- DT:Rich -->
<p>AR PL SungtiL GB is a high quality Chinese TrueType font
(gbsn00lp.ttf) generously provided by Arphic Technology to the Free
Software community under the Arphic Public License.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic-gkai00mp 20001125 623 noarch
=Sum: AR PL KaitiM GB Chinese TrueType font by Arphic Technology
+Des:
<!-- DT:Rich -->
<p>AR PL KaitiM GB is a high quality Chinese TrueType font
(gkai00mp.ttf) generously provided by Arphic Technology to the Free
Software community under the Arphic Public License.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-caslon 20031202 97 noarch
=Sum: Caslon TrueType fonts
+Des:
<!-- DT:Rich -->
<p>The Caslon TrueType font is a partial implementation of Unicode.
I does not contain
<ul>
<li>CJK characters (ideographs)
</li><li>Asian & Indian alphabets and sylabaries
</li><li>Arabic
</li></ul>
but it contains enough for most European languages including the
euro-sign.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-cmex-song 0.20060920 2 noarch
=Sum: CMEXSong Traditional Chinese TrueType font made by CMEX
+Des:
<!-- DT:Rich -->
<p>CMEXSong Traditional Chinese TrueType font made by CMEX.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-founder-simplified 0.20040419 10 noarch
=Sum: simplified Chinese TrueType fonts made by Beijing Founder Electronics
+Des:
<!-- DT:Rich -->
<p>simplified Chinese TrueType fonts made by Beijing Founder Electronics
<p>update-alternatives creates, removes, maintains and displays
information about the symbolic links comprising the alternatives
system. It is possible for several programs fulfilling the same or
similar functions to be installed on a single system at the same
time. For example, many systems have several text editors installed at
once. This gives choice to the users of a system, allowing each to use
a different editor, if desired, but makes it difficult for a program
to make a good choice of editor to invoke if the user has not
specified a particular preference.
</p><p>
On SUSE Linux, this functionality is only used for packages that are part of the JPackage project <http://www.jpackage.org/>
</p>
-Des:
##----------------------------------------
=Pkg: update-desktop-files 10.1 66 noarch
=Sum: A Build Tool to Update Desktop Files
+Des:
<!-- DT:Rich -->
<p>This package provides further translations and a shell script to update
desktop files. It is used by the %suse_update_desktop_file rpm macro.
</p>
-Des:
##----------------------------------------
=Pkg: vtcl 1.6.0 73 noarch
=Sum: Visual Tcl
+Des:
<!-- DT:Rich -->
<p>Visual Tcl is a freely-available, high-quality application development
environment for UNIX, Windows, and Macintosh platforms. Writing
entirely in Tcl and generating pure Tcl should make porting either
unnecessary or trivial.
</p>
-Des:
##----------------------------------------
=Pkg: w3m-el 1.4.3 42 noarch
=Sum: w3m-el is a simple interface program to use w3m with Emacs.
+Des:
<!-- DT:Rich -->
<p>w3m-el is a simple interface program to use w3m with Emacs.
</p><p>
W3 is the most well known WEB browser which works on (X)Emacs, but it
is very slow. w3m-el is a simple and speedy alternative.
</p><p>
w3m-el uses w3m, which is a pager with WWW capability, developed by
Akinori ITO. It is a pager, but it can be used as a text-mode WWW
browser.
</p>
-Des:
##----------------------------------------
=Pkg: w3m-el-xemacs 1.4.3 42 noarch
=Sum: w3m-el is a simple interface program to use w3m with XEmacs.
+Des:
<!-- DT:Rich -->
<p>w3m-el is a simple interface program to use w3m with (X)Emacs.
</p><p>
W3 is the most well known WEB browser which works on (X)Emacs, but it
is very slow. w3m-el is a simple and speedy alternative.
</p><p>
w3m-el uses w3m, which is a pager with WWW capability, developed by
Akinori ITO. It is a pager, but it can be used as a text-mode WWW
browser.
</p>
-Des:
##----------------------------------------
=Pkg: wadokujt 20030810 138 noarch
=Sum: German/Japanese dictionary 'Wadoku Jiten' in EDICT format
+Des:
<!-- DT:Rich -->
<p>'wadokujt' is the German/Japanese dictionary 'Wadoku Jiten' compiled by
Ulrich Apel <apel@hus.osaka-u.ac.jp> and converted by Hans-Joerg
Bibiko <mail@bibiko.com> to EDICT format (EDICT is a well known
Japanese/English dictionary compiled by Jim Breen
<j.breen@csse.monash.edu.au>).
</p><p>
</p><p>
'wadokujt' can be used with all lookup programs which can work with
dictionary files in EDICT format, for example gjiten, xjdic, and
edict.el.
</p>
-Des:
##----------------------------------------
=Pkg: wesnoth-data-full 1.1.12 5 noarch
=Sum: Shared data for Battle for Wesnoth
+Des:
<!-- DT:Rich -->
<p>This package contains the full shared dataset for Battle for Wesnoth. You should install this package for the full graphical and audio experience when playing Wesnoth campaigns.
</p>
-Des:
##----------------------------------------
=Pkg: wesnoth-data-small 1.1.12 5 noarch
=Sum: Small shared dataset for Battle for Wesnoth
+Des:
<!-- DT:Rich -->
<p>This package contains the minimum required shared data for playing Battle for Wesnoth. Compared to the full version it lacks some music scores and larger graphics, but the game campaigns remain fully playable.
</p><p>
The package is thought to be an alternative option for users of modems or other slow bandwidth connections who don't want to download the full set.
</p>
-Des:
##----------------------------------------
=Pkg: wl-xemacs 2.12.0 43 noarch
=Sum: Wanderlust, Yet Another Message Interface On Emacsen
+Des:
<!-- DT:Rich -->
<p>Wanderlust is a mail and news management system with IMAP4rev1 support for Emacsen.
This package is for XEmacs.
</p>
-Des:
##----------------------------------------
=Pkg: wm-icons 0.3.0 489 noarch
=Sum: Window Manager Icons, themable icon distribution
+Des:
<!-- DT:Rich -->
<p>The Window Manager Icons is an efficient icon distribution designed to
be standardized and configurable. Includes several themed icon sets,
scripts, and configurations for several window managers.
</p>
-Des:
##----------------------------------------
=Pkg: wondershaper 1.1a 247 noarch
=Sum: Wondershaper is a QOS (Quality of Service) script.
+Des:
<!-- DT:Rich -->
<p>Many cablemodem and ADSL users experience horrifying latency while
uploading or downloading. They also notice that uploading hampers
downloading greatly. The wondershaper neatly addresses these issues,
allowing users of a router with a wondershaper to continue using SSH
over a loaded link happily.
</p>
-Des:
##----------------------------------------
=Pkg: words 6 37 noarch
=Sum: An English words dictionary
+Des:
<!-- DT:Rich -->
<p>This packages contains an English words dictionary which will be installed as
</p><p>
/usr/share/dict/american and linked to /usr/share/dict/words
</p><p>
The symbolic link may be used by look(1) and ispell(1). For a British
or Canadian version of such a words dictionary you may install
words-british respectively words-canadian.
</p>
-Des:
##----------------------------------------
=Pkg: xalan-j2 2.7.0 19 noarch
=Sum: Java XSLT processor
+Des:
<!-- DT:Rich -->
<p>Xalan is an XSLT processor for transforming XML documents into HTML,
text, or other XML document types. It implements the W3C Recommendations
for XSL Transformations (XSLT) and the XML Path Language (XPath). It can
be used from the command line, in an applet or a servlet, or as a module
in other program.
</p>
-Des:
##----------------------------------------
=Pkg: xdg-utils 1.0.1 7 noarch
=Sum: Utilities to uniformly interface desktop environments
+Des:
<!-- DT:Rich -->
<p>The xdg-utils package is a set of simple scripts that provide
basic desktop integration functions for any Free Desktop, such as Linux.
</p><p>
They are intended to provide a set of defacto standards. This
means that:<ul>
<li>Third party software developers can rely on these xdg-utils
for all of their simple integration needs.
</li><li>Developers of desktop environments can make sure that their
environments are well supported
</li></ul>
If a desktop developer wants to be certain that their environment
functions with all third party software, then can simply
make sure that these utilities work properly in their environment.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs-packages 20060510 28 noarch
=Sum: XEmacs Packages
+Des:
<!-- DT:Rich -->
<p>A collection of additional lisp packages for XEmacs.
You must install this package when you want to use the XEmacs
package, they are needed for most non-trivial XEmacs functions.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs-packages-info 20060510 28 noarch
=Sum: Info Files for the XEmacs Packages
+Des:
<!-- DT:Rich -->
<p>This package contains all the info files for the extra
packages for XEmacs.
All these files can be read online with XEmacs and describe
XEmacs and some of its modes.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2 2.8.1 18 noarch
=Sum: Java XML parser
+Des:
<!-- DT:Rich -->
<p>Welcome to the future! Xerces2 is the next generation of high
performance, fully compliant XML parsers in the Apache Xerces family.
This new version of Xerces introduces the Xerces Native Interface (XNI),
a complete framework for building parser components and configurations
that is extremely modular and easy to program.
</p><p>
The Apache Xerces2 parser is the reference implementation of XNI but
other parser components, configurations, and parsers can be written
using the Xerces Native Interface. For complete design and
implementation documents, refer to the XNI Manual.
</p><p>
Xerces 2 is a fully conforming XML Schema processor. For more
information, refer to the XML Schema page.
</p><p>
Xerces 2 also provides a partial implementation of Document Object Model
Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
Drafts. For more information, refer to the DOM Level 3 Implementation
page.
</p>
-Des:
##----------------------------------------
=Pkg: xfntjp 20020904 468 noarch
=Sum: Japanese Fixed Fonts for the X Window System
+Des:
<!-- DT:Rich -->
<p>This Package contains Japanese fixed-width fonts for X11.
</p><p>
</p><p>
It contains the fonts knj10, kaname-alter, shinonome12, shinonome16,
k14goth, Kappa20, kanji32, and marumoji.
</p><p>
</p><p>
On top of that, it also contains bold, italic, and bold-italic versions of the
popular Japanese fonts usually found in the /usr/lib/X11/fonts/misc directory of
the standard X11 distribution and bold, italic, and bold-italic versions of
iso-8859-1 fonts which fit nicely in style and width to the Japanese fonts.
</p>
-Des:
##----------------------------------------
=Pkg: xgl-hardware-list 060526 33 noarch
=Sum: Xgl hardware compatibility list
+Des:
<!-- DT:Rich -->
<p>Xgl is an Xserver that uses OpenGL for its drawing operations. This packages contains hardware compatibility information.
</p>
-Des:
##----------------------------------------
=Pkg: xhtml-dtd 2002.8.9 99 noarch
=Sum: XHTML DTDs (Document Type Definitions)
+Des:
<!-- DT:Rich -->
<p>Document Type Definitions (DTDs) for XHTML 1/1.1 and some modularized variants.
</p>
-Des:
##----------------------------------------
=Pkg: xkeyboard-config 0.9 24 noarch
=Sum: The X Keyboard Extension
+Des:
<!-- DT:Rich -->
<p>The X Keyboard Extension essentially replaces the core protocol definition of
keyboard. The extension makes possible to clearly and explicitly specify most
aspects of keyboard behaviour on per-key basis and to more closely track the
logical and physical state of the keyboard. It also includes a number of
keyboard controls designed to make keyboards more accessible to people with
physical impairments.
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons 1.3.02 40 noarch
=Sum: Common code for XML projects
+Des:
<!-- DT:Rich -->
<p>xml-commons is focused on common code and guidelines for xml projects.
It's first focus will be to organize and have common packaging for the
various externally-defined standards code relating to XML - things like
the DOM, SAX, and JAXP interfaces.
As the xml-commons community forms, we also hope to serve as a holding
area for other common xml-related utilities and code, and to help
promulgate common packaging, testing, documentation, and other
guidelines across all xml.apache.org subprojects.
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-apis 1.3.02 40 noarch
=Sum: APIs subproject of xml-commons
+Des:
<!-- DT:Rich -->
<p>xml-commons is focused on common code and guidelines for xml projects.
It's first focus will be to organize and have common packaging for the
various externally-defined standards code relating to XML - things like
the DOM, SAX, and JAXP interfaces.
As the xml-commons community forms, we also hope to serve as a holding
area for other common xml-related utilities and code, and to help
promulgate common packaging, testing, documentation, and other
guidelines across all xml.apache.org subprojects.
</p><p>
This package contains the APIs subproject of xml-commons.
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-resolver 1.1 43 noarch
=Sum: Resolver subproject of xml-commons
+Des:
<!-- DT:Rich -->
<p>xml-commons is focussed on common code and guidelines for xml projects. The first focus will be to organize and have common packaging for the various externally-defined standards code relating to XML - things like the DOM, SAX, and JAXP interfaces.
</p><p>
This package contains the resolver subproject of xml-commons.
</p>
-Des:
##----------------------------------------
=Pkg: xmlcharent 0.3 290 noarch
=Sum: XML Character Entities
+Des:
<!-- DT:Rich -->
<p>XML encodings for the 19 standard character entity sets defined in non-normative Annex D of [ISO 8879:1986].
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-fonts 7.2 14 noarch
=Sum: X.Org fonts
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains fonts maintained and shipped with X.Org.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-fonts-core 7.2 14 noarch
=Sum: Core Fonts for X.Org
+Des:
<!-- DT:Rich -->
<p>This package contains the 'fixed' and 'cursor' font required for any X
Server.
</p>
-Des:
##----------------------------------------
=Pkg: xslide 0.2.2 36 noarch
=Sum: XSL Integrated Development Environment
+Des:
<!-- DT:Rich -->
<p>An Emacs mode to edit XSL files.
</p>
-Des:
##----------------------------------------
=Pkg: xsp 1.1.18 9 noarch
=Sum: Small Web Server Hosting ASP.NET
+Des:
<!-- DT:Rich -->
<p>The XSP server is a small Web server that hosts the Mono System.Web classes for running what is commonly known as ASP.NET.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-apparmor 2.0.1 11 noarch
=Sum: Yast2 plugins for AppArmor profile management
+Des:
<!-- DT:Rich -->
<p>Yast2 forms and components for the management of Novell AppArmor profiles.
</p><p>
This package is part of a suite of tools that used to be named SubDomain.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-backup 2.14.1 16 noarch
=Sum: YaST2 - System Backup
+Des:
<!-- DT:Rich -->
<p>This package contains a module which searches for changed files and backs them up.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-bluetooth 2.14.0 33 noarch
=Sum: YaST2 Bluetooth Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for Bluetooth system configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ca-management 2.14.3 29 noarch
=Sum: YaST2-Modul for managing CAs, Certificates and Requests
+Des:
<!-- DT:Rich -->
<p>Managing CAs, Certificates and Requests in an understanding way.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-devtools 2.14.0 5 noarch
=Sum: YaST2 - Development Tools
+Des:
<!-- DT:Rich -->
<p>Scripts and templates for developing YaST2 modules and components.
Required for rebuilding the existing YaST2 modules and components (both YCP and C++).
</p>
-Des:
##----------------------------------------
=Pkg: yast2-dhcp-server 2.14.1 5 noarch
=Sum: YaST2 - DHCP Server Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for DHCP server configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-dns-server 2.14.2 10 noarch
=Sum: YaST2 - DNS Server Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for DNS server configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-firewall 2.14.1 15 noarch
=Sum: YaST2 - Firewall Configuration
+Des:
<!-- DT:Rich -->
<p>A YaST2 module to be used for configuring a firewall.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-firstboot 2.14.0 10 noarch
=Sum: YaST Initial System Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST firstboot utility runs after installation is completed. It guides the user through a series of steps that allows for easier configuration of the machine.
</p><p>
YaST firstboot does not run by default and has to be configured to run by the user or the system administrator. It is usefull for image deployments where the system in the image is completely configured, however some last steps like root password and user logins have to be created to personalize the system.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-http-server 2.14.5 3 noarch
=Sum: YaST2 - HTTP Server Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for HTTP server (Apache2) configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-inetd 2.14.1 23 noarch
=Sum: YaST2 - Network Services Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for configuring the inetd and xinetd daemons.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-installation 2.14.15 3 noarch
=Sum: YaST2 - Installation Parts
+Des:
<!-- DT:Rich -->
<p>System installation code as present on installation media.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-instserver 2.14.0 8 noarch
=Sum: YaST2 Installation Server Configuration and Management
+Des:
<!-- DT:Rich -->
<p>This packages allows you to configure an installation server suitable for installaing SuSE Linux over the network. Currently FTP, HTTP and NFS sources are supported.
<p>The YaST2 component for configuring the Infra-Red Data Access (IrDA) stack.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-iscsi-client 2.14.0 17 noarch
=Sum: Configuration of iscsi-client
+Des:
<!-- DT:Rich -->
<p>Configuration of iscsi-client
</p>
-Des:
##----------------------------------------
=Pkg: yast2-kerberos-client 2.14.5 3 noarch
=Sum: YaST2 - Kerberos Client Configuration
+Des:
<!-- DT:Rich -->
<p>With this YaST2 module, you can configure a Kerberos client so that a
Kerberos server will be used for user authentication.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ldap-client 2.14.5 10 noarch
=Sum: YaST2 - LDAP Client Configuration
+Des:
<!-- DT:Rich -->
<p>With this YaST2 module you can configure an LDAP client so that an
OpenLDAP server will be used for user authentication.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ldap-server 2.14.0 4 noarch
=Sum: YaST2-Module for the configuration of an OpenLDAP Server
+Des:
<!-- DT:Rich -->
<p>Provides basic configuration of an OpenLDAP Server over YaST2 Control Center and during installation.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-mail 2.14.0 12 noarch
=Sum: YaST2 - Mail Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for mail configuration.
It handles Sendmail, Postfix, and Fetchmail.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-mail-aliases 2.14.0 12 noarch
=Sum: YaST2 - Mail Configuration (Aliases)
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for mail configuration.
It handles Sendmail, Postfix, and Fetchmail.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-nfs-client 2.14.0 4 noarch
=Sum: YaST2 - NFS Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for configuration of NFS.
NFS stands for network file system access.
It allows access to files on remote machines.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-nfs-server 2.14.0 4 noarch
=Sum: YaST2 - NFS Server Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for configuration of an NFS server.
NFS stands for network file system access.
It allows access to files on remote machines.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-nis-server 2.14.1 14 noarch
=Sum: YaST2 - Network Information Services (NIS) Server Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for NIS server configuration.
NIS is a service similar to yellow pages.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ntp-client 2.14.2 10 noarch
=Sum: YaST2 - NTP Client Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for NTP client configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-online-update 2.14.2 10 noarch
=Sum: YaST2 - Online Update (YOU)
+Des:
<!-- DT:Rich -->
<p>YaST Online Update (YOU) provides a convenient way to download and install security and other system updates. By default it uses the official SuSE mirrors as the update sources, but it can also use local patch repositories or patch CDs.
</p><p>
This package provides the graphical user interface for YOU which can be used with or without the X Window System. It can be started from the YaST control center.
<p>This agent is used by YaST2 to modify the PAM configuration files
</p>
-Des:
##----------------------------------------
=Pkg: yast2-phone-services 2.14.0 5 noarch
=Sum: YaST2 - Phone Services Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains YaST2 modules to configure additional
phone services, for example fax and answering machines.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-powertweak 2.14.0 8 noarch
=Sum: YaST2 - Powertweak Configuration
+Des:
<!-- DT:Rich -->
<p>This Yast2 module allows you to edit some hardware and kernel parameters.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-registration 2.14.2 4 noarch
=Sum: YaST2 Registration Module
+Des:
<!-- DT:Rich -->
<p>The registration module to register products and/or to fetch an update source (mirror) automatically.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-repair 2.14.0 16 noarch
=Sum: YaST2 - System Repair Tool
+Des:
<!-- DT:Rich -->
<p>YaST2 module to be used for repairing a damaged system.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-restore 2.14.0 36 noarch
=Sum: YaST2 - System Restore
+Des:
<!-- DT:Rich -->
<p>This YaST2 module can restore a system from an archive created by the Backup module.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-runlevel 2.14.1 15 noarch
=Sum: YaST2 - Runlevel Editor
+Des:
<!-- DT:Rich -->
<p>This package allows you to specify which services will be run at system boot.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-samba-client 2.14.4 3 noarch
=Sum: YaST2 - Samba Client Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for configuration of
an SMB workgroup/domain and authentication against an SMB domain.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-samba-server 2.14.3 10 noarch
=Sum: YaST2 - Samba Server Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for Samba server configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-scanner 2.14.11 3 noarch
=Sum: YaST2 Scanner Configuration
+Des:
<!-- DT:Rich -->
<p>This package provides support for the configuration of USB scanners, SCSI scanners, scanners in HP all-in-one devices, and scanning via network (i.e. use a remote scanner via another host in the network).
</p><p>
Parallel port scanners and network scanners (i.e. a scanner which is directly accessible in the network) cannot be configured with this tool. These devices must be configured manually. For more information see http://www.sane-project.org/ and the documentation in the package "sane".
</p>
-Des:
##----------------------------------------
=Pkg: yast2-schema 2.14.2 3 noarch
=Sum: AutoYaST Schema
+Des:
<!-- DT:Rich -->
<p>AutoYaST Syntax Schema
</p>
-Des:
##----------------------------------------
=Pkg: yast2-security 2.14.2 15 noarch
=Sum: YaST2 - Security Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for security settings configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-sudo 2.14.2 31 noarch
=Sum: YaST2 - sudo configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for sudo configuration.
It configures capabilities of users to run commands as root or other user.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-support 2.14.0 8 noarch
=Sum: YaST2 - Support Inquiries
+Des:
<!-- DT:Rich -->
<p>This module allows you to collect system information for installation support in a standardized format.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-sysconfig 2.14.0 8 noarch
=Sum: YaST2 - Sysconfig Editor
+Des:
<!-- DT:Rich -->
<p>A graphical /etc/sysconfig/* editor with integrated search and context information.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-testsuite 2.14.0 5 noarch
=Sum: YaST2 - Testsuite
+Des:
<!-- DT:Rich -->
<p>This is a package for the YaST2 modules testsuite preparation and execution.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-tftp-server 2.14.0 8 noarch
=Sum: YaST2 - TFTP Server Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for configuring a TFTP server.
TFTP stands for Trivial File Transfer Protocol.
It is used for booting over the network.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-theme-openSUSE 2.14.1 10 noarch
=Sum: YaST2 - Theme (openSUSE)
+Des:
<!-- DT:Rich -->
<p>This package contains the openSUSE theme for YaST2.
<p>The package contains statistic files, one file per language. With the help of these statistics we can warn you if you select a language for installation which is unsufficiently translated.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-sv 2.14.8 5 noarch
=Sum: YaST2 - Swedish Translations
##----------------------------------------
=Pkg: yast2-trans-tr 2.14.8 3 noarch
=Sum: YaST2 - Turkish Translations
##----------------------------------------
=Pkg: yast2-trans-uk 2.14.11 3 noarch
=Sum: YaST2 - Ukrainian Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for Ukrainian.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-vi 2.14.6 6 noarch
=Sum: YaST2 - American English Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for American English.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-zh_CN 2.14.3 5 noarch
=Sum: YaST2 - Simplified Chinese Translations
##----------------------------------------
=Pkg: yast2-trans-zh_TW 2.14.6 3 noarch
=Sum: YaST2 - Traditional Chinese Translations
##----------------------------------------
=Pkg: yast2-tv 2.14.0 12 noarch
=Sum: YaST2 - TV Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for TV card configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-x11 2.14.1 3 noarch
=Sum: YaST2 - X Window System Configuration
+Des:
<!-- DT:Rich -->
<p>This module is used for configuring the X Window System from within a running system. The module is accessible from the YaST2 control center.
</p>
-Des:
##----------------------------------------
=Pkg: yum-utils 1.0.1 12 noarch
=Sum: Utilities based around the yum package manager
+Des:
<!-- DT:Rich -->
<p>yum-utils is a collection of utilities and examples for the yum package manager. It includes utilities by different authors that make yum easier and more powerful to use.
