home *** CD-ROM | disk | FTP | other *** search
- #ifndef CL_ETHERNET
-
- /* Packet driver interface classes */
- #define CL_NONE 0
- #define CL_ETHERNET 1
- #define CL_PRONET_10 2
- #define CL_IEEE8025 3
- #define CL_OMNINET 4
- #define CL_APPLETALK 5
- #define CL_SERIAL_LINE 6
- #define CL_STARLAN 7
- #define CL_ARCNET 8
- #define CL_AX25 9
- #define CL_KISS 10
- #define CL_IEEE8023 11
- #define CL_FDDI 12
- #define CL_INTERNET_X25 13
- #define CL_LANSTAR 14
- #define CL_SLFP 15
- #define CL_NETROM 16
- #define NCLASS 17
-
- /* Packet driver interface types (not a complete list) */
- #define TC500 1
- #define PC2000 10
- #define WD8003 14
- #define PC8250 15
- #define ANYTYPE 0xffff
-
- /* Packet driver function call numbers. From Appendix B. */
- #define DRIVER_INFO 1
- #define ACCESS_TYPE 2
- #define RELEASE_TYPE 3
- #define SEND_PKT 4
- #define TERMINATE 5
- #define GET_ADDRESS 6
- #define RESET_INTERFACE 7
- #define GET_PARAMETERS 10
- #define AS_SEND_PKT 11
- #define SET_RCV_MODE 20
- #define GET_RCV_MODE 21
- #define SET_MULTICAST_LIST 22
- #define GET_MULTICAST_LIST 23
- #define GET_STATISTICS 24
- #define SET_ADDRESS 25
-
- /* Packet driver error return codes. From Appendix C. */
-
- #define NO_ERROR 0
- #define BAD_HANDLE 1 /* invalid handle number */
- #define NO_CLASS 2 /* no interfaces of specified class found */
- #define NO_TYPE 3 /* no interfaces of specified type found */
- #define NO_NUMBER 4 /* no interfaces of specified number found */
- #define BAD_TYPE 5 /* bad packet type specified */
- #define NO_MULTICAST 6 /* this interface does not support multicast */
- #define CANT_TERMINATE 7 /* this packet driver cannot terminate */
- #define BAD_MODE 8 /* an invalid receiver mode was specified */
- #define NO_SPACE 9 /* operation failed because of insufficient space */
- #define TYPE_INUSE 10 /* the type had previously been accessed, and not released */
- #define BAD_COMMAND 11 /* the command was out of range, or not implemented */
- #define CANT_SEND 12 /* the packet couldn't be sent (usually hardware error) */
- #define CANT_SET 13 /* hardware address couldn't be changed (> 1 handle open) */
- #define BAD_ADDRESS 14 /* hardware address has bad length or format */
- #define CANT_RESET 15 /* couldn't reset interface (> 1 handle open) */
-
- #define CARRY_FLAG 0x1
-
- /* In pktdrvr.asm: */
- int far test_for_pd (int intno);
- int far access_type (int intno,int if_class,int if_type,int if_number,
- char far *type,unsigned typelen,int interrupt (*receiver) (void) );
- int far driver_type (int intno);
- int far release_type (int intno,int handle);
- int far get_address (int intno,int handle,char far *buf,int len);
- int far get_mtu (int intno);
- int far send_pkt (int intno,char far *buffer,unsigned length);
- int far set_mode (int intno,int handle,int mode);
-
- #endif /* CL_ETHERNET */
-