home *** CD-ROM | disk | FTP | other *** search
- OPL3-SAx Driver Installation for Win95/98.
-
- DISCLAIMER INFORMATION:
-
- NOTE: The driver(s) MAY NOT BE APPROVED by the manufacturer of your sound card
- or PC system, and that they MAY NOT WORK with your specific sound card or PC
- system configuration. Use of these driver(s) should be done at the risk of the users
- and we cannot be held responsible for anything caused by using them.
-
- Prior to installing the driver for the OPL3-SAx, you should have already created a folder
- in your hard disk drive and downloaded the executable file in that new folder as instructed
- by our web page. If not, we highly recommend that you follow all the steps for downloading.
-
- Please note that Windows will be restarted so we highly recommend that you exit out of
- any applications that you may have opened and save any files before going forward.
- It is a good practice to back-up your files before any installation.
-
- If you are ready, let's begin.
-
- For the Advance User:
-
- 1) Go to the folder, in your hard disk drive, where you downloaded the executable file.
- 2) Double click on "Setup.exe"and follow all Pop Up window instructions.
-
- Detailed step-by-step instructions:
-
- 1) Go to the Task Bar and click on "Start"
- 2) Click on "Programs"
- 3) Click on "Windows Explorer"
- 4) Locate the folder where you downloaded the executable file and open it.
- 5) Double Click on the folder called "Disk 1"
- 6) Locate and double click on "Setup.exe." Setup.exe will restart your computer so
- please make sure you exit all open application and save any files that you were
- working on.
- 7) The "Welcome" box will appear. Read the entire message and follow the instruction.
- 9) Click "Next"
- 10) At the "Setup Complete" dialogue box, read the entire message. Click "Yes..."
- on the Restart Windows. Click "Finish" for Windows to Restart the computer.
-
- This will restart your computer. Windows will detect the hardware and automatically
- install the new driver.
-
- Verifying the Installation of the driver:
-
- 1) Click "Start" from the Task Bar
- 2) Click on "Settings"
- 3) Click on "Control Panel"
- 4) On the Control Panel Window, locate and double click on the "OPL3-SAx Config"
- icon
- 5) On the OPL3-SAx Configuration Window, locate and click on the button called
- "About..."
- 6) On the YAMAHA OPL3-SAx Configuration Window, read the version number.
- If the last 4 digits of the version number match the executable file you downloaded,
- then the mew driver was successfully installed.
-
-