home *** CD-ROM | disk | FTP | other *** search
/ Chip 1998 January / CHIPCD1_98.iso / drivers / skaner / hp / sj6100c / disk1 / _setup.lib / hpsetup.ini < prev    next >
Encoding:
INI File  |  1997-06-18  |  12.2 KB  |  498 lines
  1. ///////////////////////////////////////////////////////////////////////////////
  2. //
  3. // OLE Information
  4. //
  5. [Ole]
  6. OleRegFileName=HPDSX.REG
  7. OleWrapperFileName=HPDSX.EXE
  8.  
  9. ///////////////////////////////////////////////////////////////////////////////
  10. //
  11. // TWAIN Information
  12. //
  13. //
  14. // If TwainINIFile does not exist, the twain section will not be processed.
  15. //
  16. // Twain16 - used for 16 bit operating systems ( windows 3.1x )
  17. // Twain32 - used for 32 bit operating systems ( windows nt, 95 )
  18. //
  19. // The remove statements allow for removal of old twain files.
  20. // The File statements tell the installer which files to add and where to add them
  21. // 
  22. [Twain]
  23. TwainINIFile=HPDS23.INI
  24. TwainDSFile=DESKSCAN.EXE
  25. TwainDataSource=HPDS23.DS
  26.  
  27. [Twain16]
  28. Remove1=$WINDIR\TWAIN\HPDS.DS
  29. Remove2=$WINDIR\HPDS.INI
  30. File1=$WINDIR\TWAIN_32\HPDS23.DS
  31.  
  32. [Twain32]
  33. Remove1=$WINDIR\TWAIN_32\HPDS.DS
  34. Remove2=$WINDIR\HPDS.INI
  35. File1=$WINDIR\TWAIN_32\HPDS23.DS
  36.  
  37. ///////////////////////////////////////////////////////////////////////////////
  38. //
  39. // REGISTRY Information
  40. //
  41. // Every registry entry specifies the OS and interface card that the current installing system
  42. // is using.  For each of these entries we list the Key that needs to be created the value that
  43. // is associated with that key.
  44. // Registry entries below have the following format:
  45. // 
  46. // [REGISTRYKEY]
  47. // Key1=<REGISTRY KEY #1>
  48. // Key2=<REGISTRY KEY #2>
  49. //  ...
  50. // KeyN=<REGISTRY KEY #N>
  51. //
  52. // Key1Label1=<Label #1 THAT GOES INTO KEY #1>
  53. // Key1Label2=<Label #2 THAT GOES INTO KEY #1>
  54. //    ...
  55. // Key1LabelN=<Label #N THAT GOES INTO KEY #1>
  56. //
  57. // Key2Label1=<Label #1 THAT GOES INTO KEY #2>
  58. // Key2Label2=<Label #2 THAT GOES INTO KEY #2>
  59. //    ...
  60. // Key2LabelN=<Label #N THAT GOES INTO KEY #2>
  61. //
  62. //    ...
  63. //
  64. // KeyNLabel1=<Label #1 THAT GOES INTO KEY #N>
  65. // KeyNLabel2=<Label #2 THAT GOES INTO KEY #N>
  66. //    ...
  67. // KeyNLabelN=<Label #N THAT GOES INTO KEY #N>
  68. //
  69. // Defines to use as variable types are: ( Note:  these are InstallShield 3.0 defines )
  70. //
  71. //  REGDB_STRING       : String variable with no newline characters.
  72. //  REGDB_STRING_EXPAND: String holding an expandable env. expression
  73. //  REGDB_STRING_MULTI : String with newline characters
  74. //  REGDB_NUMBER       : Number expressed as a string and passed in string variable
  75. //  REGDB_BINARY       : Binary data stored in a string using SetByte and GetByte.
  76. //
  77. [REGISTRY_COMMON_95]
  78. // Key1=HKEY_LOCAL_MACHINE,\Software\Microsoft\Windows\CurrentVersion\Run
  79. // Key1Label1=REGDB_STRING,Genesis,$PRODUCTDIR\gen32.exe
  80.  
  81. [REGISTRY_COMMON_NT]
  82. //  SDH - 080696
  83. Key1=HKEY_LOCAL_MACHINE,\SYSTEM\CurrentControlSet\Services\ASPI32
  84. Key1Label1=REGDB_NUMBER,ErrorControl,1
  85. Key1Label2=REGDB_NUMBER,Start,2
  86. Key1Label3=REGDB_NUMBER,Type,1
  87. Key2=HKEY_CURRENT_USER,\Control Panel\MMCPL
  88. Key2Label1=REGDB_STRING_EXPAND,ScanJet,$WINDIR\System32\hpscnmgr.dll
  89.  
  90. [REGISTRY_95_SJPLUS]
  91.  
  92. [REGISTRY_95_REMINGTON]
  93. Key1=HKEY_LOCAL_MACHINE,\Enum\Root\HPScanJetScanner
  94. Key1Label1=REGDB_STRING,DeviceDesc,HP ScanJet IIc/IIp on C1752/C1753
  95. Key1Label2=REGDB_STRING,Mfg,Hewlett-Packard
  96.  
  97. [REGISTRY_95_FRED]
  98. Key1=HKEY_LOCAL_MACHINE,\Enum\Root\SCSIAdapter\0009
  99. Key1Label1=REGDB_STRING,Class,SCSIAdapter
  100. Key1Label2=REGDB_STRING,DeviceDesc,Symbios Logic 53C400A ( HP Version ) SCSI Adapter
  101. Key1Label3=REGDB_STRING,Mfg,Hewlett-Packard
  102.  
  103. [REGISTRY_95_VERDI]
  104.  
  105. [REGISTRY_95_NEC]
  106.  
  107. [REGISTRY_NT_SJPLUS]
  108. Key1=HKEY_LOCAL_MACHINE,SYSTEM\CurrentControlSet\Services\ASPI32
  109. Key1Label1=REGDB_NUMBER,ErrorControl,1
  110. Key1Label2=REGDB_NUMBER,Start,2
  111. Key1Label3=REGDB_NUMBER,Type,1
  112. Key2=HKEY_CURRENT_USER\Control Panel\MMCPL
  113. Key2Label1=REGDB_STRING_EXPAND,ScanJet,%WINDIR%System32\\hpscanmgr.dll
  114.  
  115. [REGISTRY_NT_REMINGTON]
  116. //  SDH - 090496 - REMOVED
  117. //  We don't have nt drivers for remmington.
  118. //  Key1=HKEY_LOCAL_MACHINE,SYSTEM\CurrentControlSet\Services\Scsiscan
  119. //  Key1Label1=REGDB_NUMBER,Start,0
  120.  
  121. [REGISTRY_NT_FRED]
  122. //  SDH - 090496 - REMOVED
  123. //  This was not under verdi, isn't this all or nothing?
  124. //  Key1=HKEY_LOCAL_MACHINE,SYSTEM\CurrentControlSet\Services\Scsiscan
  125. //  Key1Label1=REGDB_NUMBER,Start,0
  126.  
  127. [REGISTRY_NT_VERDI]
  128.  
  129.  
  130. [REGISTRY_NT_NEC]
  131.  
  132. [REGISTRY_REAL_MODE]
  133. Key1=HKEY_LOCAL_MACHINE,\System\CurrentControlSet\Services\Class\HpScanJetScanner\@@@@
  134. Key1Label1=REGDB_STRING,DriverDesc,HP ScanJet using Real Mode Drivers
  135. Key1Label2=REGDB_STRING,InfPath,scanjet.inf
  136. Key1Label3=REGDB_STRING,InfSection,"SJARMD"
  137. Key2=HKEY_LOCAL_MACHINE,\System\CurrentControlSet\Services\Class\HpScanJetScanner
  138. Key2Label1=REGDB_STRING,(Default),HP ScanJet Scanners
  139. Key2Label2=REGDB_STRING,Icon,101
  140. Key2Label3=REGDB_STRING,Installer,hpsjclas.dll
  141. Key3=HKEY_LOCAL_MACHINE,\Enum\Root\hpsj_armd\####
  142. Key3Label1=REGDB_STRING,Class,HpScanJetScanner
  143. Key3Label2=REGDB_STRING,DeviceDesc,HP ScanJet using Real Mode Drivers
  144. Key3Label3=REGDB_STRING,Driver,HpScanJetScanner\@@@@
  145. Key3Label4=REGDB_STRING,Mfg,Hewlett-Packard
  146. Key3Label5=REGDB_STRING,HardwareID,hpsj_armd
  147. Key4=HKEY_CURRENT_CONFIG,\Enum\ISAPNP\SLI4161\FFFFFFFF
  148. Key4Label1=REGDB_BINARY,CSConfigFlags,10000000
  149.  
  150. [IconCommon]
  151. IconRemove1=Screen Calibration
  152. IconRemove2=SCSI Addresses
  153. IconRemove3=Scanner Test
  154. IconRemove4=ReadMe.Txt
  155. IconRemove5=Visioneer PaperPort
  156. IconRemove6=HP Scanning Product Tour
  157. IconRemove7=HP Scanner Calibration
  158. IconRemove8=HP ScanJet Copy Utility
  159. IconRemove9=HP SCSI Addresses
  160. IconRemove10=HP Scanner Test
  161. IconRemove11=HP Screen Calibration
  162. IconRemove12=HP Uninstall
  163. IconRemove13=README.WRI
  164. IconRemove14=README.DOC
  165. IconRemove15=HP Copier
  166. IconAdd1=HP ScanJet Copy Utility,hpccopy.exe
  167. IconAdd2=HP Scanner Test,scantest.exe
  168. IconAdd3=HP ScanJet Uninstall,$PRODUCTDIR\uninstal.exe
  169. // IconAdd2=HP ScanJet Scanner Calibration,scancal.exe
  170. // IconAdd4=HP ScanJet Screen Calibration,screen.exe
  171. // IconAdd5=HP ScanJet ReadMe,$WINDIR\write readme.wri
  172. // IconAdd6=HP ScanJet Button Manager,gen32.exe
  173. // IconAdd7=HP ScanJet Product Tour
  174.  
  175. // Note - Wordpad has replaced Write as the default system editor even
  176. // though the Write name is still supported.  Unfortunately, Wordpad
  177. // can read files, but does not save files, to the .WRI format.  Since
  178. // it's currently easier to locate the Write exe in the windows directory
  179. // rather than searching accessories or whatever, we only changed the
  180. // file format.
  181.  
  182. [Icon31]
  183. // IconAdd1=HP SCSI Addresses,scsiaddr.exe
  184. // IconAdd2=HP ScanJet Uninstall,$PRODUCTDIR\uninstal.exe
  185. // IconAdd2=HP ScanJet ReadMe,$WINDIR\write readme.doc
  186.  
  187. [Icon95]
  188. IconAdd1=HP ScanJet ReadMe,$WINDIR\write readme.wri
  189.  
  190. [IconNT]
  191. IconAdd1=HP ScanJet ReadMe,$WINDIR\system32\write readme.wri
  192.  
  193. // 
  194. // Ini file entries
  195. //
  196. // Entry defined as:
  197. //       Entry# = Section, Key, KeyValue, Multiple entries allowed, Use short filenames
  198. //
  199. [WinIniCommon]
  200. // Entry1=Windows,load,$PRODUCTDIR\hpsjbmgr.exe,Yes,No
  201.  
  202. [SystemIniCommon]
  203.  
  204. [MaxLinkIniCommon]
  205. // Entry1=WordImageLink,LinkPath,$PRODUCTDIR\wilink.glk,No,Yes
  206.  
  207. [WinNTTextFiles]
  208. Entry1=$WINDIR\system32\config.nt,TRUE,hpscan16.sys,REPLACE,FIRST,device=%SystemRoot%\system32\drivers\hpscan16.sys
  209.  
  210. [MasterSetup]
  211. NumDisks=3
  212. Software=DeskScan
  213. RebootSystemReq=1
  214. RestartWindowsReq=1
  215. TempDir=~HPSETUP.TMP
  216. RestartBatName=RESTART.BAT
  217. Programs=2
  218. RequiredProductSpace=2500
  219. RequiredWindowsSpace=3500
  220. RequiredWin32sSpace=4420
  221. InstallGenesis=0
  222.  
  223. [Install]
  224. UserName=
  225. Company=
  226. DefaultSN=F934CGFU2G
  227. Type=Local
  228. SharedDirectoryPath=c:\
  229. InstallHP=YES
  230.  
  231. [Program0]
  232. DisplayName=Visioneer PaperPort Software
  233. DiskLabel=PaperPort Disk 1
  234. WindowTitle=PaperPort Setup
  235.  
  236. SetupEXE=SETUP.EXE
  237. RequiredProgram=1
  238. File=desktop.z
  239.  
  240.  
  241. [Program1]
  242. DisplayName=HP DeskScan II version 2.4, Drivers and Utilities
  243. DiskLabel=HP Scanning Software Disk #1
  244. WindowTitle=HP ScanJet Scanner Setup
  245.  
  246. SetupEXE=SETUP2.EXE
  247. RequiredProgram=1
  248. File=~hpsj.1
  249.  
  250.  
  251. [Install]
  252. SerialNumber=F8JTAHBU0U
  253.  
  254. [HPSetup]
  255. StandAloneExe=DESKSCAN.EXE
  256. InstallTitle=Installing HP Scanning Software
  257. DefaultProductDir=\deskscan\
  258. DefaultProgramGroup=HP DeskScan II
  259. DefaultScannerCard=HP SCSI SYMxxxxx
  260. Win32sVersion=1.30.172.0
  261. NECInstall=0
  262. CardSwitches=0
  263. Title=1
  264. LogFile=1
  265. RootDir=C:\
  266. DefaultPath=DESKSCAN
  267. TwainINIFile=1
  268. TwainINIFilename=HPDS23.INI
  269. OleRegFile=1
  270. OleRegFilename=HPDSX.REG
  271. OleWrapperFilename=HPDSX.EXE
  272. Version=2.4
  273. ProgramFiles=1
  274. ProductTourFiles=1
  275. WindowsFiles=1
  276. WinSysFiles=1
  277. WinTwainFiles=1
  278. ScannerChoice=0
  279. DisplayLicense=0
  280. DisplayReadMe=0
  281. PrinterSelection=1
  282. ScreenCalibration=1
  283. PaperPortIcon=1
  284. PictureScanIcon=0
  285. ReadmeIcon=1
  286. Readme2Icon=0
  287. LicenseIcon=0
  288. ScanCalIcon=1
  289. CopierIcon=1
  290. SCSIAddrIcon=1
  291. ScanTestIcon=1
  292. ScreenCalIcon=1
  293. ProductTourIcon=1
  294. UninstallIcon=1
  295. Disks=3
  296. CodePage=1252
  297. DLLFunctionDone=7
  298. DLLReturnValue=0
  299. VerdiIRQs=4,5,7,10,11,12,15
  300.  
  301. [Win3.1]
  302. Block1=PROGRAM
  303. Block2=PROGRAM31
  304. Block3=WINDOWS
  305. Block4=SYSTEM
  306. Block5=TWAIN
  307. Block6=PRODTOUR
  308.  
  309. [WinNT]
  310. Block1=PROGRAM
  311. Block2=PROGRAMNT
  312. Block3=WINDOWS
  313. Block4=SYSTEMNT
  314. Block5=SYSTEM32NT
  315. Block6=TWAIN
  316. Block7=PRODTOUR
  317. Block8=SYSTEM32NTDRIVERS
  318.  
  319. [Win95]
  320. Block1=PROGRAM
  321. Block2=PROGRAM95
  322. Block3=WINDOWS
  323. Block4=SYSTEM95
  324. Block5=TWAIN
  325. Block6=INF95
  326. Block7=PRODTOUR
  327. Block8=IOSUBSYS
  328.  
  329. [INF95]
  330. Directory=$WINDIR\INF
  331. File1=SCANJET.INF,V
  332. File2=HP400A.INF,V
  333. File3=SYM53416.INF,V
  334.  
  335. [PROGRAM]
  336. Directory=$PRODUCTDIR
  337. ; file1 must always be the main executable
  338. Remove1=HPSCANER.DLL
  339. File1=DESKSCAN.EXE,U
  340. File2=DESKSCAN.HLP,U
  341. File3=DESKSCAN.INI,UA
  342. File4=HPDSX.EXE,U
  343. File5=HPDSX.REG,U
  344. // File =SCANCAL.EXE,U
  345. // File =SCANCAL.HLP,U
  346. // File =HPSCANER.DLL,U
  347. File6=HPCCOPY.EXE,U
  348. File7=HPCCOPY.HLP,U
  349. // File =SCREEN.EXE,U
  350. // File =INSTSCRL.VBX,U
  351. File8=PREVIEW.DS2,U
  352. // File =PREVMIX.PS1,U
  353. // File =PREVTEXT.PS1,U
  354. File9=CALSCRN.DS2,U
  355. File10=README.wri,U
  356. File11=SCANTEST.EXE,U
  357. // File =WILINK.GLK,U
  358. // File =WIOLECLI.EXE,U
  359. // File =HPSJBMGR.EXE
  360. // File =HPPSCAN.CNT,U
  361. File12=UNINSTAL.EXE
  362. File13=URESENG.DLL
  363. File14=HFT00000.DS2,U
  364. File15=HFT00001.DS2,U
  365. File16=HFT00002.DS2,U
  366. File17=HFT00003.DS2,U
  367. File18=HFT00004.DS2,U
  368. File19=CAL00003.DS2,U
  369. File20=CAL00004.DS2,U
  370. File21=DS2FONT.FON,U
  371. File22=HPBMP.DLL,U
  372. File23=HPEPSF.DLL,U
  373. File24=HPPCX.DLL,U
  374. File25=HPREAD.DLL,U
  375. File26=HPTIFF.DLL,U
  376.  
  377. [PROGRAM31]
  378. Directory=$PRODUCTDIR
  379. File1=SCSIADDR.EXE,U
  380. File2=HPSCNTST.DLL,U
  381.  
  382. [PROGRAM95]
  383. Directory=$PRODUCTDIR
  384. File1=SCSIAD32.EXE,U
  385.  
  386. [PROGRAMNT]
  387. Directory=$PRODUCTDIR
  388. File1=SCSIAD32.EXE,U
  389. // File =READ_NT.WRI,U
  390. // File =HPRESSET.EXE,U
  391.  
  392. [WINDOWS]
  393. Directory=$WINDIR
  394. Remove1=AUTOLNCH.REG
  395. File1=TWAIN.DLL
  396. File2=TWAIN_32.DLL
  397. File3=TWUNK_16.EXE
  398. File4=TWUNK_32.EXE
  399. // SDH - W32S - File5=WINHLP32.EXE
  400.  
  401. [SYSTEM]
  402. Directory=$WINSYSDIR
  403. File1=CTL3D32.DLL
  404. File2=MFC40.DLL
  405. File3=MFCUIA32.DLL
  406. File4=MSVCRT20.DLL
  407. File5=HPSJ16.DLL
  408. File6=HPSJ32.DLL
  409. File7=HPWNSCSI.DLL
  410. File8=HPWNSCSI.INI
  411. File9=HPSM32S.DLL
  412. File10=ODBCINT.DLL
  413. File11=ODBCCP32.DLL
  414. File12=REG32.DLL
  415. File13=MSVCRT40.DLL
  416. // File =REG16.DLL
  417. File14=MFC30.DLL
  418. File15=MFCANS32.DLL
  419. FILE16=MFCO30.DLL
  420.  
  421. [SYSTEM95]
  422. Directory=$WINSYSDIR
  423. File1=HPSJCLAS.DLL
  424. File2=MFC40.DLL
  425. File3=MFCUIA32.DLL
  426. File4=HPSCNMGR.DLL
  427. File5=HPSCNMGR.HLP
  428. File6=HPSJ1695.DLL
  429. File7=HPSJ32.DLL
  430. File8=CTL3D32.DLL
  431. File9=HPSCNTST.DLL
  432. File10=MSVCRT40.DNT,X,MSVCRT40.DLL
  433. File11=HPWNSCSI.DLL
  434. File12=HPWNSCSI.INI
  435. File13=ODBCINT.DLL
  436. File14=ODBCCP32.DLL
  437. File15=REG32.DLL
  438. File16=MSVCRT20.DNT,X,MSVCRT20.DLL
  439. File17=SCNMNGR.CNT
  440. File18=aspienum.vxd
  441. File19=winaspi.dll
  442. File20=wnaspi32.dll
  443. File21=MFC30.DLL
  444. File22=MFCANS32.DLL
  445. File23=MFCO30.DLL
  446. File24=HPSCANER.DLL
  447.  
  448. [SYSTEMNT]
  449. Directory=$WINDIR\SYSTEM
  450. File1=WOWPOST.EXE
  451. File2=WINASPI.DLL
  452.  
  453. [SYSTEM32NT]
  454. Directory=$WINDIR\SYSTEM32
  455. File1=MFC40.DLL
  456. File2=MFCUIA32.DLL
  457. File3=HPSCNMGR.DLL
  458. File4=HPSCNMGR.HLP
  459. File5=HPSJ16.DLL
  460. File6=HPSJ32.DLL
  461. File7=HPSCNTST.DLL
  462. File8=MSVCRT40.DNT,X,MSVCRT40.DLL
  463. File9=CTL3DNT.DLL,X,CTL3D32.DLL
  464. File10=REG32.DLL
  465. File11=MSVCRT20.DNT,X,MSVCRT20.DLL
  466. File12=SCNMNGR.CNT
  467. File13=MFC30.DLL
  468. File14=MFCANS32.DLL
  469. File15=MFCO30.DLL
  470. File16=WNASPI32.DLL
  471. File17=HPSCANER.DLL
  472. File18=HPSCAN32.DLL
  473.  
  474. [SYSTEM32NTDRIVERS]
  475. Directory=$WINDIR\SYSTEM32\DRIVERS
  476. File1=ASPI32.SYS
  477. File2=HPSCAN16.SYS
  478.  
  479. [TWAIN]
  480. Directory=$WINDIR\TWAIN_32
  481. File1=HPDS23.DS,UA
  482.  
  483. [PRODTOUR]
  484. Directory=$PRODUCTDIR\PRODTOUR
  485. // File1=hp31.exe,U
  486.  
  487.  
  488. [IOSUBSYS]
  489. Directory=$WINSYSDIR\IOSUBSYS
  490. File1=apix.vxd
  491.  
  492. [EISAFiles]
  493. Directory=$PRODUCTDIR
  494. File1=@621f.adf,U
  495. File2=@631f.adf,U
  496. File3=!hwp2002.cfg,U
  497. File4=!hwp2080.cfg,U
  498.