2 There is no active printer selected. Choose Page Setup from the File menu to select a printer.
3 SmartDraw requires at least 350K of free memory to run.
4 Unable to open a file created with a later version of SmartDraw.\nTo get the latest version of SmartDraw visit our web site at http://www.smartdraw.com.
5 Unable to open file. It is probably not a SmartDraw file.
6 Not enough disk space for standard operations. Please delete unnecessary files from your disk and try again.
7 Unable to open the file you requested. It may not exist or you may have too many files open.
8 Unable to open file. The file you tried to open may not exist, or you may be low on memory or disk space.\nIf the file does exist, check disk space, particularly on your C: Drive, close other applications, then try again.
9 You can open up to 16 documents at the same time. Save and close one of the open documents, then try again.
10 Unable to save file. Try saving to another disk or to a different directory.
11 There is not enough memory normal operations. Please close other programs or exit SmartDraw. If the problem persists, consult your Windows User's Guide for ideas on how to allocate more memory for applications.
12 The Print Setup dialog cannot be opened. It may be that the printer/port combination assigned to this printer cannot be found. Do you want to switch to the default printer?
13 There are too many different fonts in use. Close your documents and exit the program.
14 You have entered more text in this block than you can save. Please undo your last change.
15 A problem occurred while printing. Check your printer assignment. Turn your printer off and on, then try again.
16 Unable to undo this operation.
17 Disk or memory error occurred. Unable to complete this operation.
20 This file does not have a format suitable for import.
21 SmartDraw cannot import compressed BMP files.
23 There is nothing to export in this drawing.
24 You must select at least two shapes or lines for this command to work.
25 Aligning the objects you have selected to the object with the solid selection "handles" would cause one or more of them to lie outside your drawing area.
26 The printer you have selected is not suitable for graphical output. Please select another.
27 You cannot align objects that are hooked to other objects. You must select at a least two objects that are not hooked to any others to use the Align command.
28 Objects that are hooked to other objects can only be moved by first unhooking them. This can be done by moving them with the mouse.
29 Making this change would force some of your objects outside the bounds of the drawing area.
30 Adding more objects would exceed the limit of 16,000 objects per drawing.
31 One or more of the objects you selected for this operation is hooked to two other objects. Their size is determined by the position of those objects and cannot be changed with this operation.
32 There are no objects to print.
33 You must first click on one of the buttons in the symbol library window.
34 This will permanently remove this symbol from the library.
35 The line you have selected as the target has no "size" in this direction.
36 None of the objects you have selected can be sized to match your target object in the direction you have chosen because horizontal and vertical lines can only be sized along their length.
37 Your Windows system resource level is only %d%%. This may lead to drawing errors. Close other applications.
38 You cannot move or resize objects that are hooked to two other objects. Their position and size are determined by the objects they are hooked to.
40 An error occurred while closing this library. It may be damaged. Restore it with the original copy if possible, or delete it.
41 This trial version of SmartDraw has now expired. You may download a recent copy from http://www.smartdraw.com.\nTo purchase a copy, contact SmartDraw at 1 800 501 0314 [858 549 0314 outside the US].
42 This version of SmartDraw is damaged or has been tampered with.\n Contact SmartDraw.com at (858) 549 0314 for a replacement.
43 You can have up to 16 symbol library windows open at the same time. Use the "Libraries" menu in one of the open windows to select another library for that window.
44 This library is already open and has been brought to the front.
45 You can only apply a line type to ordinary straight lines. \n\nLine Types do not apply to segmented lines and arcs.
46 A library can store up to 40 symbols. This library is full. Try adding the symbol to a different library.
47 You have dragged this symbol to another library window.\n\nDo you want to add a copy to this library?
48 There is no file hyperlinked to this object.\n\nWould you like to select one?
49 The file hyperlinked to this object can no longer be found.\n\nDo you want to link to another?
50 Clear hyperlinks from all selected objects?
51 This symbol library cannot be modified because it has not been opened with write permission. This is probably because you already have it open as a document toolbar or has been opened by another user.
52 One or more of the objects that you are attempting to group are linked to another that is not included in the group. These linked objects have been omitted from the group.
53 If you save this drawing it will be converted to SmartDraw 6 format, and will no longer be readable by SmartDraw versions 5, or earlier.\n\n Continue saving?
54 If you save this drawing it will be converted to SmartDraw 6 format, and will no longer be readable by SmartDraw versions 5, or earlier. Saving it to another file name using "Save As.." will retain the original copy.\n\n Continue saving?
55 You must select at a least three objects that are not hooked to any others to use the Space Evenly command.
56 Adding more links would exceed the limit of 6000 links per drawing.
57 Printed with an UNLICENSED COPY of SmartDraw.
58 This drawing was created with a later version of SmartDraw.\n If you save it to the same name, some of the information in the original copy may be lost.\n Saving it to another file name using "Save As.." will retain the original copy.\n\n Continue saving?
59 This file was created for use with the Trial Edition of SmartDraw only. It cannot be opened by the regular version.
60 Unable to locate the MAPI.DLL file in your system.
61 Do you want to allow a drive used by some of your documents to be removed?
62 The drive containing this and other documents attached to it has been disconnected. You must save them to another path.
63 This file is a read only file, or it is in use. You cannot save it under its current name. Choose Save As and save under a different name.
64 This file is already in use, or is a read only file. You can save any changes you make, but only to another file name.
66 Objects that are hooked to other objects can only be flipped or rotated by first unhooking them. This can be done by moving them with the mouse.
67 You have dragged these objects to a symbol library window.\n\nDo you want to add a copy of these objects to this library as a new symbol?
68 There are no objects to center. The drawing is empty.
73 Windows was unable to find or load your web browser. \n\nRun it manually and go to URL
74 Windows was unable to find or load your file. \n\nRun the application that opens it and open file
75 The expiration date for your trial edition has been extended to 30 days from now. You will not be able to extend your trial again.
76 The expiration date for your trial cannot be extended. This is because it has been extended once already, or SmartDraw's timer mechanism has been tampered with.
77 The tutorial file cannot be found.
78 An error occurred using a filter from the SmartDraw Advanced Filter Pack. Make sure you have installed this additional software properly.
79 This operation will decompose the selected images into separate objects.\nContinue?
80 Unable to open object.
81 This object does not have the correct format to be added to SmartDraw.
82 Unable to create object. The server application, the source file or the item cannot be found.
83 This object is now too large to be represented on a SmartDraw page and has been closed.
84 The text that you are about to paste contains either tab, return, or comma delimiters. Press YES if you want to paste this in a range of table cells or NO if you want to paste it into just the selected cell.
85 To insert or delete cells please select a single rectangular area of the table.
86 To insert or delete all or part of a column you must select a range of cells that span the whole column. Your selection does not start and end on a full column divider.
87 To move cells to the right or left you must select a range that aligns with the tops and bottoms of all the cells to the right.\nYour range partially overlaps with cells that span more than one row.
88 The maximum of 64 stored table formats has already been reached.
89 This is a permanent member of the list and cannot be removed.
90 This will permanently remove this table format from the list.
91 Apply to the selected range only?\nClick "YES" to apply this change to only the selected rows. \nClick "NO" to apply to the whole table.
92 This will convert the selected tables to normal shapes with a single text entry field.
93 Do you want to check all the text in the shape or just the range selected?\nClick YES to check all the text in the shape.\nClick NO to check just the range selected.
94 SmartDraw finished checking the text in this shape.\n Do you want to continue checking the text in the other shapes in this drawing?
95 Spelling correction is disabled because SmartDraw cannot properly update your system registry or was not installed correctly.
96 The spelling check is complete.
97 The search is complete.
98 SmartDraw finished searching the selection.\n Do you want to continue searching the remainder of the drawing?
99 SmartDraw finished searching the drawing.\n The search item was not found.
100 The search is complete and %d replacements were made.
101 None of the shapes you have selected can change their connection point setting.\n\nThis is because they are not shapes that appear on the SmartDraw program toolbar, or they already have infinite connection points.
102 Some of the shapes you have selected cannot change their connection point setting! Only shapes that appear on the program toolbar can do this.
103 To open this library it must be converted to Version 6 format. If you choose to convert it you will no longer be able to use the library with earlier versions of SmartDraw.\n\nConvert the library?
104 Open Library operation cancelled!
105 Your PC's display is configured to show only 256 colors or less. This will cause the colors shown in this dialog to be different than those shown in drawing. \nUse the Windows control panel to increase the color depth of your display.
106 Applying a change to a left-facing arrow is the same as applying the change to the corresponding right facing arrow (and visa versa).
107 The picture on the clipboard is too large (requires too much memory) to use as an arrowhead. Use simple pictures for arrowheads.
108 Your system has a double-byte character set. Spelling correction is not supported.
109 An error occurred using the Visio Filter. \n\nMake sure your Visio file was saved from Visio with a "Preview". This is set using the Properties command under Visio's File menu.
110 You can only shift cells down if the column they occupy extends all the way to the bottom of the table. Your selection is only part of the widest column below it.
111 This feature is not enabled because the online installation of the Professional components has not been completed.\nOnce you are informed that the installation is complete, restart your trial and this feature will be enabled.
114 You have selected a line and a single shape to group together.\n\nWould you like to attach the shape to the center of the line?
115 Your SmartDraw license file has been tampered with. Your access to SmartDraw and image collections may be impacted. \n Contact SmartDraw.com at (858) 549 0314 for a replacement.
116 You appear to have set your clock back. Your access to SmartDraw image collections will be governed by the latest date on which you have run the program.
117 Your license to the SmartDraw %s collection has expired. You may renew your license for unrestricted use online at http://www.smartdraw.com/products/smartdraw/addcollections.htm
118 Your license to the SmartDraw %s collection has not been updated for this quarter. If you have not received your update by email contact update@smartdraw.com.
119 This library or document contains unlicensed symbols from the SmartDraw %s collection. You may purchase a license that allows unrestricted use online at http://www.smartdraw.com/products/smartdraw/addcollections.htm
120 This document already requires a license to the SmartDraw %s collection. You cannot add more symbols that require a different license.
121 License not installed!\nInstalling this license requires version %s of SmartDraw or later. You can obtain this version from www.smartdraw.com
122 You cannot transfer unlicensed symbols to other libraries
123 You cannot run SmartDraw over a network without a network license. \nContact http://www.smartdraw.com/products/smartdraw/workgroup for more information.
124 This installation only updates an existing %s license. You may purchase a license online at http://www.smartdraw.com/products/smartdraw/addcollections.htm
125 This update cannot extend your %s license because it would be extended beyond your license's expiration date.
126 Unlicensed objects cannot be ungrouped.
127 You cannot paste unlicensed objects into SmartDraw documents.
128 You appear to be running the trial version of SmartDraw over a network. To use the full version on a network you must purchase a WorkGroup license. \nContact http://www.smartdraw.com/products/smartdraw/workgroup for more information.
130 This library or document requires a license to the SmartDraw %s collection.\nYou can change the configuration of your trial to include this by selecting Professional Plus when the program starts.
131 Windows was unable to find or load your web browser. \n\nRun it manually and go to URL %s
132 The following file was not updated with the credits information. This may be because it is already open as a library or toolbar:\n
133 There are no files of this type in the folder you have specified.
134 The file\n%s\n already exists. Do you want to replace it?
135 An error occurred creating file\n%s\nDo you want to continue?
136 %d file(s) were successfully converted to SmartDraw format.\nOpen these files from the same folder as your %s file(s).
137 There is no SmartDraw Advisor for this file. Would you like to assign one?
138 You are closing the %s Advisor.\nIt will automatically appear if you open this template again.
139 SmartDraw has been installed successfully, so please continue.\n\nHowever SmartDraw was unable to make some entries in your system registry. This will disable pasting from SmartDraw into other application, and some other minor features. Otherwise, SmartDraw should work as expected. \n\nTo correct this problem, and avoid future problems, please ask your administrator to change your permissions to Standard User instead of Restricted User. Simply running SmartDraw with these permissions will register it fully.
140 To save a file in an older format, you must give it a name or location that is different than your original file.\nEnter a different name for the file.
141 You can only drag icons to your Favorites folder, or to the drawing area to open them.
142 Adding this to the folder would exceed its maximum of 50 items.
143 Adding a subfolder to this folder would exceed the maximum number of 5 levels of nesting.
144 Are you sure that you want to delete all of your favorites?
145 The preview of the file you are trying to install does not contain the information needed. Try updating your installation.
146 SmartDraw is unable to begin the update process. The program SDUPDATE.EXE must be in your SmartDraw program folder . Try re-installing SmartDraw.
147 %s %s has been successfully installed.
148 Library, template and category names cannot contain a backslash or a period.
149 This category already exists.
150 %s\nThis %s already exists. Replace the existing %s?.
151 Unable to create folder
152 You cannot add your own items to this folder.\n Choose one that already contains %s or is a sub folder of one that contains %s.
153 You must select a category.
154 The SmartDraw CD was not found in drive %s.\nPlease check the location and CD and try again.
155 Your license to the SmartDraw %s collection is for a previous version of the software. You may renew your license for unrestricted use online at http://www.smartdraw.com/products/smartdraw/addcollections.htm
156 Your license file appears to have been moved to a new drive.\nTo move SmartDraw to a new drive you must install it into an empty folder.
157 Your permission to use SmartDraw has been withdrawn by your system administrator.
158 The number of computers allowed to access SmartDraw under this network license has been exceeded.\nSee your network administrator.
159 The serial number associated with this network license has already been used to increase the number of users, and cannot be used again.
160 You must be running SmartDraw onthe server itself to activate and deactivate users.
161 Activating this user will exceed your limit.\n You must deactivate another user first, or purchase more seats.
162 The SmartDraw license file cannot be read.\nIt many be in use or damaged.
163 The SmartDraw License file is locked while this dialog is open.\nNo additional users may be added to the network while it is open.
164 The number of concurrent users allowed to access SmartDraw under this network license has been exceeded.\nSee your network administrator.
165 The serial number for this installation is not valid.
166 There appears to be no license installed for this version of SmartDraw.\nYou may need to re-install the program.
167 There are no files to convert in the path you have selected.
168 You have exported two files:\n%s and the image file %s stored in folder:\n%s.
169 Click here for more %s libraries...
170 There are many more symbol libraries, templates and examples available in this collection. Click the "More Libraries" button to download them and to learn more.
171 Click here to license this collection...
172 You can purchase a license to the %s collection online. Click the "Purchase License" button for more information.
173 Purchase &License...
174 or
175 This is a preview file. You cannot add previews to your favorites without installing the complete file.\nWould you like to install it now?
176 This folder contains preview files, and you cannot add previews to your favorites. Install the complete files by dragging the previews to the drawing area.
177 This folder contains preview files, and you cannot add previews to your favorites. Install the complete files by dragging the previews to the drawing area.
178 No matches found. Try another keyword.
179 The serial number for this installation belongs to a purchase that has been returned and so is no longer valid.
180 The shape cannot be scaled to match the coordinates of your rulers because it would be too small. It has been added at its fixed size.
181 The shape cannot be scaled to match the coordinates of your rulers because it would be too large for the drawing area. It has been reduced in size by a factor of 10 or more.
182 You don't have the necessary permissions to use the SmartDraw network licensing system. \nYou must have write permission in the SmartDraw program folder.
183 Unable to create the library. A library with the same name may already exist and be open.
184 The authorization code entered is not valid.
185 This product has been returned.\nYour RMA number is \n%s.\nWRITE THIS NUMBER DOWN.\nYou need it to receive any refund.
186 Before you can return this network license you must reduce the number of enabled users by %d.\nDo this by pressing the View Users button in the Licenses dialog.
188 The serial number used by this installation is not authorized and has been disabled. If you believe this to be in error please contact SmartDraw.com at support@smartdraw.com.
189 The program %s cannot be found.
190 This command will remove all unlicensed libraries, templates and previews from your Explorer.\nYou can add them again by re-installing.
191 This file cannot be saved in an older format because it contains too much text in one or more shapes.\nYou can correct this by converting the shape into a table and distributing the text between rows.
192 One or more of your page margins are outside the printable area of the page.\n Choose "Yes" to fix this, "No" to ignore it and "Cancel" to cancel the print operation.
193 To export to a SmartDraw Photo template you must enter the word "PhotoFrame" into a shape that you want to display a photo. There are no PhotoFrames in this drawing.
194 Some of the objects you have selected to be part of a group are linked to other objects that are not part of the group. \nEither deselect these objects or select the objects that they are linked to.
195 Some of the objects you have selected to be part of a group are locked, or linked to objects that are locked. \nUnlock these objects and try again.
196 Two or more similar frames have the same number or no number associated with them. For example two with "PhotoFrame,1".
197 There are more than the limit of 99 frames per SmartDraw Photo Template in this drawing and therefore the export cannot be completed.
198 Two or more frames are joined in the same combination object. There can be only one frame per combination object. Ungroup and combine the frames with their backgrounds in separate combination objects.
199 There is no photo frame associated with a name or description frame. For example, "PhotoName,1" but no "PhotoFrame,1".
200 Remove gradient %s from the list?
201 Objects in this layer will be moved to the top layer.\nRemove layer %s?
202 This command will transfer your objects to the top layer.
203 This command will transfer your objects to the bottom layer.
204 This command will transfer your objects to the bottom layer and will hide them or make them not clickable.
205 Photo Frames cannot be rotated. Rotate all frames to "Horizontal" using the Rotate commands under the Arrange menu.
206 You have exported a web site of two or more linked pages.These are stored in folder:\n%s.\nThe home page is index.htm.
207 The email address you entered is not valid.\nPlease enter your real email address. We will respect your privacy.
208 You must enter a password.
209 The passwords you entered in the password field and the confirm field do not match. Please enter the same password in both.
210 You must check the box agreeing to the SmartDrawNet Terms and Conditions of Use before you can publish images.\nWould you like another chance to read and agree to the terms?
211 The image upload operation failed.\nMake sure you have SmartDraw installed correctly and that you are connected to the Internet.
212 Another image upload operation appears to be in progress.\n Please wait for this to complete before uploading additional images.
213 You must enter an album name before you can upload to SmartDrawNet.
214 You did not check the box at the bottom of the dialog indicating your agreement with the SmartDraw Trial Edition License.\nClick "Yes" if you agree to the terms of the license.
215 You cannot edit this shape because it has too many line segments.
216 Automatic connectors and their shapes cannot be included in combination objects.
217 You cannot remove the last gradient from the list.
218 You have reached the maximum of 128 stored gradients. You must remove one before you can add any more.
219 You cannot add to this line because it already has the maximum number of 75 segments.
220 Unable to export file. You may not have enough memory or disk space to accommodate it.
221 Sorry, you have used all of your free printing opportunities.\nTo print, please purchase a copy.
222 The SmartDraw Trial Version was unable to initialize itself correctly on your system.\nPlease contact support@smartdraw.com with REFERENCE NUMBER=0.(write this down now!)\n and we may be able to help.
223 The SmartDraw Trial Version was unable to initialize itself correctly on your system.\nPlease contact support@smartdraw.com with REFERENCE NUMBER=1.(write this down now!)\n and we may be able to help.
224 The SmartDraw Trial Version was unable to initialize itself correctly on your system.\nPlease contact support@smartdraw.com with REFERENCE NUMBER=2 (write this down now!)\n and we may be able to help.
225 The SmartDraw Trial Version was unable to initialize itself correctly on your system.\nPlease contact support@smartdraw.com with REFERENCE NUMBER=3.(write this down now!)\n and we may be able to help.
226 The SmartDraw Trial Version was unable to initialize itself correctly on your system.\nPlease contact support@smartdraw.com with REFERENCE NUMBER=4.(write this down now!)\n and we may be able to help.
227 The SmartDraw Trial Version was unable to initialize itself correctly on your system.\nPlease contact support@smartdraw.com with REFERENCE NUMBER=5.(write this down now!)\n and we may be able to help.
497 The file that contains the German language menus and dialogs is a later version than the program exe.\nDownload and install the latest versions of both from www.smartdraw.com/international.htm.\n\nBecause of this program menus and dialogs will be displayed in English.
498 The file that contains the German language menus and dialogs is an earlier version than the program exe.\nDownload and install the latest versions of both from www.smartdraw.com/international.htm.\n\nBecause of this program menus and dialogs will be displayed in English.
499 Version 6.08 Sep-19-2002
500 Untitled
501 Save changes to %s
502 SmartDraw
504 Object in %s
505 This object has been changed. Do you want to update %s before proceeding?
507 &Close and Return to %s
508 &Close Ctrl+W
509 Save Copy &As...
510 Save &As...
511 &Update %s
512 &Save Ctrl+S
513 Order Form
514 Click below here and type
515 Hide S&hadow
516 Show S&hadow
517 SmartDraw User's Guide.HLP
518 SMARTD4.OPT
519 SMARTD4.CLP
520 Created with the Trial Edition of SmartDraw.
521 SMARTD3.OPT
522 SMART200.OPT
523 LIBRARY
524 Times New Roman
525 0
526 SMRTDRAW.OPT
527 Professional Edition for Windows
528 Standard Edition for Windows
532 SmartDraw Software Inc.\SmartDraw\Version6
533 SmartDraw Trial Edition
534 SMART95.OPT
535 C&hange Line Shape
536 C&hange Connector Shape
537 FlowCharts
538 SmartDraw User's Guide.pdf
540 &Format... Ctrl+R
541 Convert To &Table...
542 sdtutor.exe
543 Filters
544 readme.doc
545 &Insert Rows
546 &Insert Columns
547 &Insert Cells...
548 &Delete Rows
549 &Delete Columns
550 &Delete Cells
551 Simple
552 [Current Settings]
553 (no spelling suggestions)
554 SPELLING
555 American English
556 Convert To &Text...
557 &Replace
558 TEMPLATES
559 EMPTY.SDT
560 ICON.BMP
561 Business & Charting\Graphs
562 YOUR ORDER CODE IS
563 More &Languages...
566 SmartDraw Professional
567 Business & Charting\WordArt
568 SmartDraw Order Forms.hlp
573 Click here and type
574 Hint: To separate the drawing into its component parts, click on the drawing, then select the Ungroup command from the Draw menu
575 Hint: To separate the drawing into its component parts, click on the drawing, then select the Ungroup command from the Arrange menu.
1400 This symbol was not created using SmartDraw and so it cannot be set to automatic.
1401 The grayed settings are assigned automatically to the SmartDraw objects contained in this symbol.
1402 To change these, uncheck the "Automatic" box above.
1403 Set the connection points by dragging the black circular points with the mouse.
1404 Adjust the text margins by clicking on the black squares and dragging the lines.
1500 Insert &Hyperlink Ctrl+K
1501 Edit &Hyperlink Ctrl+K
1602 On the %s on %s
1603 Printing Cancelled
1605 - Page
1701 No Preview Available
1702 Empty Flowchart
1703 Create New Library
1704 Results of Find
1705 None found
1710 Single
1711 Double
1750 You have more than one object selected. \nThis dialog applies changes only to the one "target" object. This is the object with the solid selection handles.
1751 Your object is linked to another and cannot be moved.
1760 Add New Table
1761 Convert Shape to Table
1770 Add a New Layer
1771 Edit Layer
1780 %s, %d Colors, %s
1781 Export to HTML Files
1782 Export
1783 Select "Publish to SmartDrawNet" to use this feature.\nYou have chosen to export your drawing as HTML files to a folder on your PC. To view these you will have to upload them to your own web site.
3213 Drag this template to the drawing area to create a new blank drawing of this type.
3214 Drag your favorite libraries to this folder.
3215 Drag your favorite templates and examples to this folder.
3216 Drag your favorite libraries and templates to this folder.
3217 Drag the icons in these folders onto the drawing area to open them, or double-click them.
3218 Click to open this folder.
3219 libraries
3220 The %s %s already exists in this folder!
3221 templates
3222 library
3223 template
3224 Double-click name to open.
3225 Double-click name to install.
3226 UNLICENSED. Drag the icons in these folders onto the drawing area to open them, or double-click them.
3227 UNLICENSED. Click to open this folder.
3250 28.8K Modem;120
3251 56K Modem;240
3252 500K DSL;3000
3253 T1 or Cable;9000
3260 < 1 min.
3261 %d min.
3270 Select a category or folder for the library.
3271 Select a category or folder for the template.
3280 Enabled
3281 Disabled
3290 Windows Bitmap,1,4,8,24
3291 PC Paintbrush,1,8
3292 TIFF,1,8,24
3293 GIF,8
3294 PNG,1,8,24
3295 JPEG,24
3296 HTML,8,24
3350 rect
3351 circle
3352 poly
3500 Symbols
3501 (cm)
3600 Press the Browse button to search for another SmartDraw drawing to link to this text or shape.\nAfterward, clicking on the link will open the drawing.
3601 Type in the web address you want this text or shape to link to. \nIf your web browser is configured correctly, clicking on the link will automatically open the web page.
3602 SmartDraw will run other applications and open their documents when you click on this type of link.\nUse this to associate text files, Word documents, and other notes with a text link or shape.
3603 SmartDraw will run another application with a command line when you click on this type of link. Press the Browse button to search for an application.
3610 These kind of links are included when you publish your drawing to your web space on SmartDrawNet.
3611 These kind of links are NOT included when you publish your drawing to your web space on SmartDrawNet.
3620 Show me again?
3621 Show me
3622 SD Advisor
3623 Click here for an "in depth" tutorial...
3640 %s units from the left edge.
3641 %s units from the top edge.
3642 Select the number of divisions shown in each %s on the screen.
3643 inch
3698 Select the file you want to convert
3699 Select an example of the type of file you want to convert
3700 Visio (*.vsd)
3701 MicroGrafx Flowcharter (*.flo)
3702 ABC Flowcharter (*.abc)
3703 Flowcharting PDQ (*.pdq)
3704 AllClear (*.acd)
3705 Other Format (*.*)
3720 None
3721 Library
4600 &Object
4601 Con&vert...
4602 Picture (Metafile)
4603 picture
4604 Bitmap
4605 bitmap
4606 Linked
4607 &Open...
4800 English
4802 German
4803 French
4804 Spanish
4805 Japanese
5000 SmartDraw Standard
5001 SmartDraw Professional
5002 SmartDraw Professional Plus
5003 Business & Charting
5004 Network Design
5005 Software Design
5006 Floor Plans & Facilities
5007 Electrical Engineering
5008 Mechanical Engineering
5009 Science & Math
5010 Clip Art & Flyers
5011 Maps & Geography
5012 Life & Leisure
5013 Medical & Anatomy
5020 Standard
5030 None Selected
5031 You may run this trial version of SmartDraw %d MORE TIMES before it expires.
5032 You may run this trial version of SmartDraw for %d MORE DAYS, before it expires.
5033 Your trial version timer has been tampered with (%c). Contact support@smartdraw.com.
5034 Your system clock has been set back. Return the clock to the correct time to run.
5035 Your trial has ended. To continue to run SmartDraw you must purchase a copy.
5036 PLUS:\n%s
5037 By clicking Continue, with the above box checked, you agree to the terms of the license agreement.
5038 business
5039 networkdesign
5040 software
5041 floorplans
5042 electrical
5043 mechanical
5044 science
5045 clipart
5046 maps
5047 life
5048 medical
5060 69
5061 129
5062 198
6107 Select an Object
6108 Select Multiple Objects
6109 Create or Edit Text
6110 Draw a Straight Line
6111 Draw a Segmented Line
6112 Draw a Curved Line
6113 Draw an automatic connector line (then drag shapes onto it)
6114 Draw a Rectangle
6115 Draw a Rounded Rectangle
6116 Draw an Oval
6117 Draw an Input/Output Symbol
6118 Draw a Decision Symbol
6119 Draw a Document Symbol
6120 Draw a Terminate Symbol
6121 Draw a Connector Symbol (Circle)
6122 Draw a Right Arrow
6123 Draw a Left Arrow
6124 Draw a Top Arrow
6125 Draw a Bottom Arrow
6126 Draw a Triangle
6127 Draw a Reverse Triangle
6128 Draw an Input Symbol
6129 Draw a Trapezoid
6130 Draw a Manual Operation Symbol
6131 Draw an Octagon
6132 Draw an Online Storage Symbol
6133 Draw a Preparation Symbol
6134 Draw an Off-page Connector Symbol
6135 Draw a Pentagon
6136 Draw a Delay Symbol
6137 Draw a Display Symbol
6215 Bold
6216 Italic
6217 Underline
6218 Subscript
6219 Superscript
6220 Increase Text Size
6221 Decrease Text Size
6246 Add a Table to the drawing
6247 Draw an Arc
6248 Draw a freeform line or shape in steps (right-click or double-click to stop)
6249 Draw a freeform line or shape continuously with the pen.
6250 Add a Photo to the Drawing
6500 Create a new empty drawing
6501 Open a file
6502 Save
6503 Print
6504 Print preview
6505 Cut
6506 Copy
6507 Paste
6508 Format Painter
6509 Undo
6510 Redo
6511 Scale up
6512 Scale down
6513 Help
6514 Open the SmartDraw Explorer and view symbols and sample files
6515 E-mail this drawing to a friend
6516 Insert or edit a hyperlink
6517 Portrait vs. Landscape
6518 Publish this document to the web
6600 Add a bitmap to the drawing
6601 Add a graph to the drawing
6602 Add WordArt« to the drawing
6603 Add Office Clip Art to the drawing
6604 Add an equation to the drawing
6605 Add an Excel worksheet to the drawing
6606 Add a Word document to the drawing
6607 Add a GraphPad Prism project to the drawing
6608 Add an Altima NetZoom shape to the drawing
7499 Tip #
7500 You can draw lines and shapes by drawing with the mouse, as well as by drag-and-drop./122
7501 Double click on a toolbar button to change the shape it shows./30030
7502 If you draw line from one shape to another it will stay connected if you move or resize the shapes it connects!/118
7503 Change the initial size and shape of the shapes you drag from the toolbar by double clicking on their toolbar button./30030
7504 Apply shadows to shapes, lines and text by selecting the Colors and Shadows command under the Edit menu./30028
7505 Make rows and columns of lines and other shapes using the Duplicate command./105
7506 Store your favorite settings for new documents. Use the Save Template command to create or edit templates./127
7507 Make your objects the same size using Make Same Size command under the Arrange menu./128
7508 Change the place your library symbols show text by double-clicking on their button in the library window./30026
7509 Align objects with each other using the Align command./129
7510 Change the position of text inside a shape, or on a line, using the Alignment command under the Text menu./115
7511 Insert useful symbols using the Insert Symbol command under the text menu./116
7512 Select more than one object by clicking on them with the shift key held down, or with the multiple-select tool on the toolbar./106
7513 Draw perfectly square objects by holding down the Ctrl key while drawing them./130
7514 Type text labels into the background by selecting the text tool and clicking anywhere in the drawing./131
7515 Center the entire drawing on the page using the Center Drawing on Page command under the Arrange menu./114
7516 Make fine adjustments in the position of selected objects by typing the arrow keys./123
7517 Make fine adjustments in the size of selected objects by typing the arrow keys with the shift key held down./126
7518 Change the way shapes grow when text is added using the Text Entry Properties command under the Shapes menu./30029
7519 Create your own symbol libraries./213
7520 Create your own drawing color schemes and shadow styles using the Colors and Styles command./30027
7521 Hide the shadows on selected shapes and lines using the Hide-Show Shadow command under the Arrange menu./202
7522 Open up to 16 symbol libraries at the same time./212
7523 Create hierarchies of flow charts using the Hyperlink command, under the Tools menu./30036
7524 Change to the shape of lines to curves and visa versa using the Change Line Shape command./209
7525 Flip shapes and lines left and right and upside down using the Flip command under the Arrange menu./201
7526 Adjust the outline of shapes using the diamond-shaped adjustment handle./203
7527 Change the way shapes grow, imported pictures change color and whether text inside is spell-checked using the Shape Properties command./30035
7528 Format diagrams automatically using Automatic Connectors!/207
7529 Create one-step diagrams by selecting a template./228
7530 Search the symbol libraries for the symbol you want by name./30282
7531 Rotate shapes by any angle./30050
7532 Change connector arrangements instantly using the Change Connector Shape command./132
7533 Open drawings by dragging them from the Explorer (or file manager) to the SmartDraw program window./30022
7534 Open libraries by dragging them from the SmartDraw Explorer to the drawing window./212
7535 Create new symbols by dragging shapes from the drawing window and dropping them on a library window./133
7536 Turn your favorite library into a toolbar by "docking" it at the top of the window./214
7537 Attach text labels to lines by simply selecting the line and starting to type!/216
7538 Show the length of lines automatically using the Show Length command./30055
7539 Set the scale of your drawing using the Define Rulers and Grid command./108
7540 Automatically format text in a bulleted list./210
7541 Give each text paragraph in the same shape its own justification./115
7542 Select your own colors shown on the SmartDraw color menus./233
7543 Join lines together to make your own shapes./332
7544 Break shapes down into their component lines and curves to edit their outlines./206
7545 Shift-click on the toolbar buttons to keep them selected./217
7546 Create shapes with more than one text entry area using tables./134
7547 Define your own arrowheads./230
7548 Give your shapes infinite connect points./227
7549 Insert Graphs, Equations and other Microsoft Office objects into your drawings with the Professional Edition/229
7550 Check spelling while your type./225
7551 Find and replace words in your drawing./226
7552 Export your drawings to HTML with web page links intact./345
7553 Add libraries and templates that you use frequently to your Favorites folder in the SmartDraw Explorer./30284
7554 Reset the origin of a ruler by double-clicking on the ruler where you want the origin to be./108
7555 Use the Allow Shapes to Link to Lines command to allow shapes to link to lines./30289
7556 Draw your own unique shapes with the FreeForm drawing tools. [Professional]/340
7557 Create sophisticated color schemes using "Gradient Fill" from the Fill Color menu.[Professional]/341
7558 Use Layers to view or print different parts of your drawing independently.[Professional]/342
7559 Easily share your drawings with others by publishing them to your free web space at SmartDraw.com./345
7560 Hyperlink your text (just like on the web) using the "Insert Hyperlink" command./30036
7561 Instantly change from Portrait to Landscape using the button on the toolbar./343
7562 Scale your drawings up to fit your page (even poster size!) with the "scale up to fit page" option in the Page Setup dialog./30033
7563 Adjust the outline of existing shapes using the Edit Shape Outline command./206
7564 Create an Org Chart using the button on the toolbar./207
7565 Add a photo to your drawing using the button on the toolbar./346
7566 Use the Format Painter tool to apply colors and styles to objects in your drawing/348
7567 Create your own templates for SmartDraw Photo by exporting to Photo Template format./347